-
دسترسی آزاد مقاله
1 - بررسی وضعیت جذب، حفظ و ارتقاء هیات علمی دانشگاه آزاد اسلامی و ارائه مدلی مناسب جهت بهبود وضعیت موجود
نادر قلی قورچیان مریم اسلام پناهجذب و بکارگیری نیروی متخصص و شایسته، حفظ و نگهداری و ارتقای زندگی حرفهای اعضاء هیات علمی از عوامل تاثیر گذار بر کارایی و اثربخشی آموزش عالی محسوب میشود. مقاله حاضر با بررسی وضعیت جذب، حفظ و ارتقاء هیات علمی دانشگاه آزاد اسلامی به ارائه مدلی مناسب جهت بهبود وضعیت موجو چکیده کاملجذب و بکارگیری نیروی متخصص و شایسته، حفظ و نگهداری و ارتقای زندگی حرفهای اعضاء هیات علمی از عوامل تاثیر گذار بر کارایی و اثربخشی آموزش عالی محسوب میشود. مقاله حاضر با بررسی وضعیت جذب، حفظ و ارتقاء هیات علمی دانشگاه آزاد اسلامی به ارائه مدلی مناسب جهت بهبود وضعیت موجود میپردازد در این راستا با استفاده از مرور ادبیات مربوطه و مطالعه تطبیقی، چارچوب ادراکی مدل با مؤلفههای جذب و بکار گماری با 20 زیر مؤلفه، حفظ و نگهداری با 35 زیر مؤلفه، آموزش و بهسازی با 21 مؤلفه، ارتقاء با 40 زیر مؤلفه، مهارتها و وظایف آموزشی، مهارتها و وظایف پژوهش، مهارتها و وظایف خدماتی و مشاورهای، مهارتها و وظایف مجازی، مهارتها و وظایف اجتماعی تدوین گردید. جامعه آماری تحقیق، اعضاء هیات علمی ادانشگاه آزاد اسلامی واحدهای تهران میباشند که با استفاده از روش نمونه گیری تصادفی طبقهای 440 نفر از اعضاء هیات علمی نتخاب شدند و برای اعتبارسنجی مدل تعداد50 نفر از اعضاء هیات علمی و متخصصان آموزش عالی انتخاب گردیدند. در این زمینه دو نوع پرسشنامه طراحی گردید و با استفاده از روشهای آمار توصیفی و استنباطی (تحلیل عاملی، کای اسکور، ماتریس ضریب همبستگی) دادهها مورد تجزیه و تحلیل قرار گرفتند. یافته های حاصل از پرسشنامه نشان میدهد که کل چارچوب مدل با توجه به دادهها از تناسب بالایی برخوردار است عمده پاسخها (24 نفر از 45 نفر) برگزینه خیلی مناسب و 21 نفر برگزینه مناسب تمرکز دارند که نشانگر ارزیابی بسیار مناسب متخصصان آموزش عالی و اعضای هیات علمی از مدل پیشنهادی است. برای بررسی رابطه بین کل چارچوب ادراکی مدل با اهداف و فلسفه و همچنین هر یک از مؤلفههای چهارگانه و تئوریهای مدل با شمای مدل و فلسفه و اهداف مدل از روش همبستگی رتبهای اسپیرمن استفاده گردید که نتایج ماتریس همبستگی بیانگر رابطه مثبت و معنادار است. در پایان پیشنهادها و توصیههای کاربردی جهت بهبود وضعیت جذب، حفظ و ارتقاء هیات علمی ارائه گردید. پرونده مقاله -
دسترسی آزاد مقاله
2 - ظروف سفالی آلبارِلو: شناخت و طبقهبندى آنها در جهان اسلام
سید هاشم حسینى حسین سپید نامهیکی از فرمهای رایج سفالینهها در جهان اسلام، ظروف سفالی موسوم به آلبارلو[1] است که از لحاظ تزیین و تکنیک ساخت دارای تنوع بسیار است. مطالعه و شناخت دقیق این فرم سفالی و شاخصه های تزیینی آن از ایران تا شمال آفریقا، از مهمترین اهداف این پژوهش است. براساس پژوهش انجامشده، چکیده کاملیکی از فرمهای رایج سفالینهها در جهان اسلام، ظروف سفالی موسوم به آلبارلو[1] است که از لحاظ تزیین و تکنیک ساخت دارای تنوع بسیار است. مطالعه و شناخت دقیق این فرم سفالی و شاخصه های تزیینی آن از ایران تا شمال آفریقا، از مهمترین اهداف این پژوهش است. براساس پژوهش انجامشده، ظروف سفالی آلبارلو به دو گروه بدنه استوانه ای و اندکی مقعر (گلدانی شکل)، و بدنه محدب (خمچه مانند) قابل طبقهبندی است؛ سفالینه های استوانه ای و مقعر برای داروهای خشک، مانند ادویه جات و ضماد، و سفالینه های بدنه محدب برای داروهای مایع کاربرد داشته است. تولید این ظروف سفالی از سده چهارم هجری در ایران رواج داشته و با گسترش تکنیک های سفالگری در اواسط دوره سلجوقی و تولید انبوه آن (بهویژه سفال زرینفام) در ایران و مناطق غربی جهان اسلام چون سوریه، مصر و اسپانیا ارتباط مستقیم یافته است. پرونده مقاله -
دسترسی آزاد مقاله
3 - Determination of the amplitude-frequency for strongly nonlinear oscillator by two approximate analytical techniques
Amir Ayazi Hadi Ebrahimi KhahAbstractIn this paper, we investigate two of the analytical approximate techniques, energy balance method and amplitude-frequency formulation, and these approximate techniques are applied to solve the strongly nonlinear differential equation of a mass attached to the ce چکیده کاملAbstractIn this paper, we investigate two of the analytical approximate techniques, energy balance method and amplitude-frequency formulation, and these approximate techniques are applied to solve the strongly nonlinear differential equation of a mass attached to the center of a stretched elastic wire. We present a comparative study between the energy balance method and amplitude-frequency formulation with exact solution. The approximate results reveal that these methods are very effective and convenient for determining the frequencies of nonlinear dynamical systems. پرونده مقاله -
دسترسی آزاد مقاله
4 - Calculating formation range of binary amorphous alloys fabricated by electroless plating
Bangwei Zhang Shuzhi Liao Xiaolin Shu Haowen XieAbstractA lot of amorphous alloy deposits in the binary (Ni, Co, Cu)–(P, B) alloy systems fabricated by electroless plating (EP) have been reported up to date. But no one reported their theoretical modeling of the amorphous formation and calculated their concentration r چکیده کاملAbstractA lot of amorphous alloy deposits in the binary (Ni, Co, Cu)–(P, B) alloy systems fabricated by electroless plating (EP) have been reported up to date. But no one reported their theoretical modeling of the amorphous formation and calculated their concentration range of amorphous formation (RAF). Using Miedema model and subregular model scheme, the RAFs for the six EP (Ni, Co, Cu)–(P, B) alloys and three Ni–Cu, Ni–Co and Co–Cu alloys have been calculated systematically for the first time. The calculated results are in agreement with experimental observations. Experiments and calculations for the RAFs in the latter three alloy systems reveal that not any RAF formed except crystalline states. The huge difference between the six metal–metalloid alloys and three metal–metal alloys in RAF has been discussed in detail in the paper. پرونده مقاله -
دسترسی آزاد مقاله
5 - The static properties and form factors of the deuteron using the different forms of the Wood–Saxon potential
B. Rezaei A. DashtimoghadamAbstractThe basic properties and form factors of the deuteron system are investigated for the different forms of the Wood–Saxon potential. We have used the Nikiforov-Uvarov (NU) method for analytical solution of the radial Schrodinger equation. A comparison of the calcu چکیده کاملAbstractThe basic properties and form factors of the deuteron system are investigated for the different forms of the Wood–Saxon potential. We have used the Nikiforov-Uvarov (NU) method for analytical solution of the radial Schrodinger equation. A comparison of the calculated values with experimental results are given. It is shown that the obtained results for the modified form of the Wood–Saxon potential are very close to the experimental results in comparison with other forms of the potential. پرونده مقاله -
دسترسی آزاد مقاله
6 - بررسی ارتباط بین نقش بازیگران تدوین خط مشی عمومی با اجرای خط مشی های سلامت نظام اداری(مورد مطالعه:سازمان های اجرایی استان خوزستان)
فرهاد قیصری سنجر سلاجقه فرزانه بیگ زاده عباسی ایوب شیخیزمینه: یکی از دلایل عدم اجرای صحیح خطمشیهای عمومی عدم ارتباط بین تدوین کنندگان خطمشی عمومی و مجریان میباشد. در صورتی که تدوین کنندگان خطمشی عمومی با اجرا ارتباط داشته باشند بسیاری از مشکلات از بین خواهند رفت اما در عمل این گونه نیست. هدف: پژوهش حاضر با هدف بررسی ارتباط چکیده کاملزمینه: یکی از دلایل عدم اجرای صحیح خطمشیهای عمومی عدم ارتباط بین تدوین کنندگان خطمشی عمومی و مجریان میباشد. در صورتی که تدوین کنندگان خطمشی عمومی با اجرا ارتباط داشته باشند بسیاری از مشکلات از بین خواهند رفت اما در عمل این گونه نیست. هدف: پژوهش حاضر با هدف بررسی ارتباط بین نقش بازیگران تدوین خطمشی عمومی در اجرای خطمشیهای سلامت نظام اداری انجام شده است. روش: در این پژوهش جهت شناسایی بازیگران تدوین خطمشی عمومی از نظرات خبرگان با سابقه در حوزه خطمشی گذاری عمومی استفاده و سپس با تلفیق مولفههای استخراج شده از مبانی نظری پژوهش، پرسش نامه ای در خصوص نقش بازیگران تدوین خطمشی عمومی تنظیم گردید. برای شناسایی خطمشیهای سلامت نظام اداری از قوانین و خطمشیهای این حوزه استفاده و در اختیار پاسخگویان قرار گرفت. برای تجزیه و تحلیل دادهها از نرم افزارهای Spss 22 و Amos 22 استفاده شد. یافته ها: در این پژوهش که بیشترین میانگین رتبه(63/7) مربوط به رسانههای گروهی بود. همچنین در خصوص وضعیت اجرای خطمشیهای سلامت نظام اداری در دستگاههای اجرایی رتبه بندی صورت گرفت. نتیجه گیری: نتایج نشان داد که بین نقش بازیگران تدوین خطمشی عمومی با اجرای خطمشیهای سلامت نظام اداری رابطه معناداری وجود دارد. پرونده مقاله -
دسترسی آزاد مقاله
7 - پیش زمینه های شکل گیری خط مشی های نظام سلامت اداری بر عملکرد بین سازمانی با میانجی شفاف سازی در استانداری کرمانشاه
رضا تقوایی سارا شیخ بکلوزمینه: مهمترین اصل در تدوین و اجرای موثر خط مشی نظام سلامت اداری توجه به پیش زمینه ها و زیر ساخت های شکل گیری خط مشی ها می باشد. تدوین مناسب خط مشی نظام سلامت اداری بر اساس پیش زمینه های متناسب با آن موجب افزایش ظرفیت خط مشی در ساماندهی اجرا می شود. به طور کلی سلامت نظا چکیده کاملزمینه: مهمترین اصل در تدوین و اجرای موثر خط مشی نظام سلامت اداری توجه به پیش زمینه ها و زیر ساخت های شکل گیری خط مشی ها می باشد. تدوین مناسب خط مشی نظام سلامت اداری بر اساس پیش زمینه های متناسب با آن موجب افزایش ظرفیت خط مشی در ساماندهی اجرا می شود. به طور کلی سلامت نظام اداری نتیجه تکامل هنجارهای اجتماعی و فرهنگی و به طور کلی زیرساخت ها در درازمدت است که به علت افزایش آگاهی عمومی و رشد انتظارات مردم از بخش عمومی، نهادها را پاسخگو نگه می دارد و ارزش های فرهنگی و اجتماعی مثبت را در شهروندان پرورش می دهد. هدف: پژوهش حاضر با هدف تاثیر پیش زمینه های شکل گیری خط مشی های نظام سلامت اداری بر عملکرد بین سازمانی با میانجی شفاف سازی در استانداری کرمانشاه انجام شد. روش: پژوهش حاضر از نوع تحقیق توصیفی - پیمایشی است که به صورت مقطعی اجراء شد. از نظر هدف کاربردی و دارای ماهیت آمیخته (کیفی -کمی) است. جامعه آماری بخش کیفی شامل خبرگان و متخصصین حوزه خط مشی نفر از اساتید دانشگاه و مدیران و کارشناسان استانداری کرمانشاه و نمونه آماری بخش کمی به 12 گذاری به تعداد با استفاده از 1400 نفر از کارکنان استانداری کرمانشاه در شش ماهه اول 196روش تصادفی در دسترس به تعداد جدول مورگان انتخاب گردید. نتایج حاصل از بخش کمی پژوهش با استفاده از مدلسازی معادلات ساختاری با نرم تحلیل گردید.PLSافزار یافته ها: پیش زمینه های شکل % بر عملکرد بین سازمانی تاثیر دارد. همچنین 26 گیری خط و مشی نظام سلامت به میزان پیش زمینه های شکل 73 % شفاف سازی را تبیین نمود و شفاف سازی به میزان 60 گیری خط و مشی نظام سلامت به میزان % بر عملکرد بین سازمانی تاثیرگذار است. درکل می توان نتیجه گرفت که پیش زمینه های شکل گیری خط مشی نظام سلامت % تاثیر دارد.44بر عملکرد بین سازمانی استانداری کرمانشاه با میانجیگری شفاف سازی به میزان نتیجه گیری: پیش زمینه های شکل گیری خط مشی نظام سلامت اداری از جمله تاکید سازمان بر انضباط و قانون مداری کارکنان، اقدام سازمان برای رشد زیرساخت های فرهنگی، ارتقای سیستم های اطلاعاتی سازمان در جهت شفاف سازی، ایجاد ثبات سیاسی در سازمان، بکارگیری مدیران با نفوذ ، تقویت رفتار حمایتی مدیران و.... بر شفاف سازی و عملکرد بین سازمانی تاثیر گذار است. پرونده مقاله -
دسترسی آزاد مقاله
8 - تبیین شاخص های فرم شهری در مقیاس میانی براساس تئوری و رهیافت تغییر تدریجی
مهران علی الحسابی مصطفی بهزادفر الناز امیرهدائیدر این مقاله با تأکید بر ضرورت ارزیابی هنجاری فرم، هدف اصلی پژوهش، استخراج و تبیین شاخصهای فرم منطبق با اصول تغییر تدریجی تعریف شده است. در این پژوهش که شاخصها با استفاده از روش سه سطحی «بعد»، «مؤلفه» و «شاخص» استخراج شدند، اکولوژی به عنوان نظام پایه و مفسر مؤلفههای چکیده کاملدر این مقاله با تأکید بر ضرورت ارزیابی هنجاری فرم، هدف اصلی پژوهش، استخراج و تبیین شاخصهای فرم منطبق با اصول تغییر تدریجی تعریف شده است. در این پژوهش که شاخصها با استفاده از روش سه سطحی «بعد»، «مؤلفه» و «شاخص» استخراج شدند، اکولوژی به عنوان نظام پایه و مفسر مؤلفههای تغییر تدریجی انتخاب گردید. با بررسی عمیق مفاهیم اکولوژی به عنوان مؤلفههای تغییر تدریجی و با استفاده از روش تحلیل مقایسهای تطبیقی و با استناد به یک معیار معتبر (نظام پایه)، نقاط لنگرگاهی آنها استخراج و مفاهیم پایه به منظور تعمیم به محیطهای شهری بازتعریف شدند. در نهایت «همجواری»، «تسلسل مکانی»، «سازواری گونه عناصر با محیط برحسب تعداد گونه»، «سازواری گونه عناصر با محیط برحسب جمعیت عناصر»، «سازواری گونه عناصر با یکدیگر»، «تنوع گونه پهنه»، «تنوع گونه عنصر»، «کلیماکس»، «گذار» و «دگردیسی عناصر» بهعنوان شاخصهای ارزیابی هنجاری فرم مبتنی بر تغییر تدریجی و براساس معیار «کاراکتر شهری» تبیین گردیدند. پرونده مقاله -
دسترسی آزاد مقاله
9 - تبیین تاثیرات پارادایم بر تغییرات فرم در معماری معاصر
غزال صفدریانآنچه امروزه مورد نقد بسیار قرار گرفته جایگاه فرم در معماری که ناشی از تکثر آراء می باشد است. جایگاه فرم در معماری طی تاریخ تعاریف مختلفی را به خود اختصاص داده که بازتابی از دیدگاه غالب فلسفی در هر دوره می باشد. آنچه در این بحث به آن پرداخته میشود بررسی روند جریانات فک چکیده کاملآنچه امروزه مورد نقد بسیار قرار گرفته جایگاه فرم در معماری که ناشی از تکثر آراء می باشد است. جایگاه فرم در معماری طی تاریخ تعاریف مختلفی را به خود اختصاص داده که بازتابی از دیدگاه غالب فلسفی در هر دوره می باشد. آنچه در این بحث به آن پرداخته میشود بررسی روند جریانات فکری معاصری است که بر فرم معماری تأثیر گذار بوده و در هر زمان در قالبی خاص تبلور یافته و تلاش میشود با استفاده از روش تحلیل محتوای متن پارادایمهای حاکم بر معماری پس از انقلاب صنعتی در اروپا مورد تحلیل قرار گیرد و سپس تأثیرات آن بر فرم معماری با توجه به مبانی نظری حاکم بر آن مورد نقد قرار گیرد .نتایج گویای آن می باشد که جهان بینی به عنوان بالاترین لایه به صورت مستقیم و غیر مستقیم موجب تغییر در سطوح پایین تر گردیده و فرم معماری همواره نمودی از این تاثیرات میباشد. پرونده مقاله -
دسترسی آزاد مقاله
10 - انسجامبخشی کالبدی به محدودهی مرکزی شهر شیراز ارائهی راهکارهای طراحی شهری به منظور افزایش انسجام کالبدی بر اساس نظریهی پیچیدگی
سید حسین بحرینی مهران فروغی فرانسجام کالبدی کیفیتی است که در کالبد شهرهای معاصر به سختی یافت میشود. در پاسخ به این مساله، هدف این پژوهش دستیابی به راهکارهای طراحی شهری است که با استفاده از آنها بتوان به کالبدی منسجم تر و پاسخگو به نیازهای معاصر شهروندان دست یافت. در این راستا، در قالب یک تحقیق کیف چکیده کاملانسجام کالبدی کیفیتی است که در کالبد شهرهای معاصر به سختی یافت میشود. در پاسخ به این مساله، هدف این پژوهش دستیابی به راهکارهای طراحی شهری است که با استفاده از آنها بتوان به کالبدی منسجم تر و پاسخگو به نیازهای معاصر شهروندان دست یافت. در این راستا، در قالب یک تحقیق کیفی و با مرور اسناد کتابخانهای و پیمایش میدانی، اصول فرم شهر بر پایهی نظریهی سیستمهای پیچیده در بافت تاریخی شهر شیراز مورد سنجش قرار میگیرد تا از این طریق امکان بهکارگیری این اصول به عنوان پایهای نظری برای راهنمای طراحی مورد ارزیابی قرار گیرد. نتایج حاصل نشان میدهد که محدودهی قدیمی شهر شیراز بر اساس اصول فرم شهر در نظریهی پیچیدگی از انسجام کالبدی برخوردار بوده و بنابراین اصول مذکور قابل تعمیم به این محدودهی است و میتوان بر اساس آنها، راهکارهایی را برای افزایش انسجام کالبدی شهرهای معاصر با توجه به شرایط زندگی امروز ارائه کرد. پرونده مقاله -
دسترسی آزاد مقاله
11 - گونه شناسی فرم شهر و ساختار فضایی پایدار؛ با نظری بر کلانشهر تهران
آزاده قرائی اسفندیار زبردست حمید ماجدیفرم و ساختارفضایی شهر، از ابعاد مهم شناخت و تحلیل شهر میباشند. بررسی ادبیات نظری پیرامون مفاهیم ساختار فضایی، فرم شهری، استخوانبندی، شکلشهر و... نشان میدهد تشتت آراء در این حوزهها بسیار است؛ لذا محقق با استفاده از روشهای پژوهش قیاسی بهدنبال تبارشناسی و واکاوی دقی چکیده کاملفرم و ساختارفضایی شهر، از ابعاد مهم شناخت و تحلیل شهر میباشند. بررسی ادبیات نظری پیرامون مفاهیم ساختار فضایی، فرم شهری، استخوانبندی، شکلشهر و... نشان میدهد تشتت آراء در این حوزهها بسیار است؛ لذا محقق با استفاده از روشهای پژوهش قیاسی بهدنبال تبارشناسی و واکاوی دقیق مفاهیم فرم و ساختارفضایی شهر است. از طرف دیگر، یکی از مهمترین منابع ناپایداری، فرم و ساختارفضایی شهر شناختهشدهاست. محقق با استفاده از روش پژوهش استقرایی و بهرهگیری از مدل خوشهبندی K-means در نرمافزار Pyton و همچنین استفاده از نرمافزارGIS جهت تحلیل دادههای مکانی و پرسشنامه ساکنین برای شاخص-های کیفی، بهدنبال آن است که ارتباط میان مؤلفههای فرم شهری و ساختار فضایی را بر مؤلفههای پایداری در مقیاس مناطق شهر تهران شناسایی نماید. همپوشانی بالای خوشهبندی مناطق تهران بر اساس شاخصهای فرم و ساختار فضایی و نیز شاخص-های پایداری، نشاندهنده تأثیرگذاری مستقیم شاخصهای فرم و ساختار فضایی شهری بر پایداری در شهر تهران است. پرونده مقاله -
دسترسی آزاد مقاله
12 - بررسی الگوی شکلی- هندسی مجموعه نقش جهان اصفهان به واسطه ساختار حرکتی اقشار مردم از منظر مکتب شکل گرایی
هیراد حسینیان جمال الدین سهیلی فریبا البرزیالگوی شکلی-هندسی ترکیب اشکال در مفهوم هندسه¬پنهان را معنا بخشیده که نیاز اقشار به¬واسطه حرکت در میدان نقش¬جهان منجربه شناسایی آن می¬شود. چنانچه از منظر مکتب شکل¬گرایی، عناصر اولیه بصری دوراند تا شناسایی اشکال¬پایه بصری کریر و نیز ابزار نقطه تا حجم هردگ را احصا می¬نماید. چکیده کاملالگوی شکلی-هندسی ترکیب اشکال در مفهوم هندسه¬پنهان را معنا بخشیده که نیاز اقشار به¬واسطه حرکت در میدان نقش¬جهان منجربه شناسایی آن می¬شود. چنانچه از منظر مکتب شکل¬گرایی، عناصر اولیه بصری دوراند تا شناسایی اشکال¬پایه بصری کریر و نیز ابزار نقطه تا حجم هردگ را احصا می¬نماید. شناسایی این ابزار منجربه دسته¬بندی و کدگذاری ساختار شکلی-حرکتی اقشار (فرد،اجتماع،حاکمیت) در مجموعه¬شده که روند ساختار شکلی-هندسی ¬مجموعه نقش¬جهان را در ادوار مختلف توجیه می¬نماید. لذا بهره ¬از روش تفسیری-تاریخی، توصیف مدل مفهومی و جداول شکلی-تحلیلی به فراخور استدلال قیاسی-استقرایی منجربه شناسایی الگوی نام¬برده از طریق ساختار حرکتی اقشار می¬شود که پرسش:«چگونه می¬توان ازطریق بررسی الگوی¬¬هندسی و روش ساختار شکلی-حرکتی اقشار برآمده¬¬از آن به پیشبرد همزمان فرم و عملکرد در مجموعه دست¬¬یافت؟» می¬تواند به ترکیب¬ ابزار بصری و کدگذاری ساختار شکلی-حرکتی از منظر عملکرد لایه¬ای فرد تا حاکمیت به الگوسازی ساختار شکلی-هندسی مجموعه نقش¬جهان دست¬یابد که به پیشبرد همزمان فرم و عملکرد نیز مبدل می¬گردد. پرونده مقاله -
دسترسی آزاد مقاله
13 - تبیین پراکنده رویی شهری بر اساس شاخص تراکم ساختمانی
محمدمهدی عزیزی مجتبی آراستهتوسعه شهر یزد در گذشته در تعامل با اقلیم بوده است، اما الگوی گسترش آن طی دوران معاصر به رشدی پراکنده تبدیل شده است که گونه های متفاوتی از فرم شهری در نواحی مختلف شهر را ایجاد نموده است. هدف مقاله، تحقیق در مورد ارتباط متغیر تراکم ساختمانی با سایر متغیرهای تعریف شده است چکیده کاملتوسعه شهر یزد در گذشته در تعامل با اقلیم بوده است، اما الگوی گسترش آن طی دوران معاصر به رشدی پراکنده تبدیل شده است که گونه های متفاوتی از فرم شهری در نواحی مختلف شهر را ایجاد نموده است. هدف مقاله، تحقیق در مورد ارتباط متغیر تراکم ساختمانی با سایر متغیرهای تعریف شده است تا بر این اساس، روند پراکنده رویی و توسعه ناپایدار شهر یزد را تحلیل نمود. روش تحقیق بر مبنای رگرسیون چندمتغیره است. یافته های تحقیق نشان می دهد در شهر یزد تراکم ساختمانی ارتباط مستقیم با تراکم جمعیتی دارد، در حالی که ارتباطی معکوس با متغیرهای فاصله از مرکز اقتصادی شهر، فاصله از مراکز ناحیه ای، قیمت زمین و مساحت بلوک های شهری دارد. این موضوع نشان دهنده رشد تقاضای زمین در مناطق حاشیه ای است. در واقع، ساکنان شهر یزد، امروزه تمایل بیشتری به زندگی در خانه های ویلایی دارند که این موضوع، حاکی از رشد پدیده پراکنده رویی در شهر یزد است. پرونده مقاله -
دسترسی آزاد مقاله
14 - تبیین شاخصهای فرم شهری در مقیاس میانی براساس تئوری و رهیافت تغییر تدریجی
مهران علیالحسابی مصطفی بهزادفر الناز امیرهدائیدر این مقاله با تأکید بر ضرورت ارزیابی هنجاری فرم، هدف اصلی پژوهش، استخراج و تبیین شاخصهای فرم منطبق با اصول تغییر تدریجی تعریف شده است. در این پژوهش که شاخصها با استفاده از روش سه سطحی بعد ،مؤلفه و شاخص استخراج شدند، اکولوژی بهعنوان نظام پایه و مفسر مؤلفههای تغییر تدر چکیده کاملدر این مقاله با تأکید بر ضرورت ارزیابی هنجاری فرم، هدف اصلی پژوهش، استخراج و تبیین شاخصهای فرم منطبق با اصول تغییر تدریجی تعریف شده است. در این پژوهش که شاخصها با استفاده از روش سه سطحی بعد ،مؤلفه و شاخص استخراج شدند، اکولوژی بهعنوان نظام پایه و مفسر مؤلفههای تغییر تدریجی انتخاب گردید. با بررسی عمیق مفاهیم اکولوژی بهعنوان مؤلفههای تغییر تدریجی و با استفاده از روش تحلیل مقایسهای تطبیقی و با استناد به یک معیار معتبر )نظام پایه(، نقاط لنگرگاهی آنها استخراج و مفاهیم پایه بهمنظور تعمیم به محیطهای شهری بازتعریف شدند. درنهایت همجواری ،تسلسل مکانی ،سازواری گونه عناصر با محیط برحسب تعداد گونه ،سازواری گونه عناصر با محیط برحسب جمعیت عناصر ، سازواری گونه عناصر با یکدیگر ،تنوع گونه پهنه ،تنوع گونه عنصر ،کلیماکس ،گذار و دگردیسی عناصر بهعنوان شاخصهای ارزیابی هنجاری فرم مبتنی بر تغییر تدریجی و براساس معیار کاراکتر شهری تبیین گردیدند پرونده مقاله -
دسترسی آزاد مقاله
15 - تحلیل محیط شهری از رویکرد کیفیت بصری
سید باقر حسینی مهران علی الحسابی فاطمه نسبیبا توسعه جوامع، توجه طراحان به کیفیت فضاها افزایش یافته و بررسیهای گستردهای درباره تأثیر فضا بر ادراک انسان، انجام شده است. عوامل مختلفی بر کیفیت فضای شهری تأثیر میگذارند که کیفیت بصری یکی از آنهاست. در این راستا هدف جستجوی رابطه میان فرم و کالبد شهر و کیفیت بصری آن چکیده کاملبا توسعه جوامع، توجه طراحان به کیفیت فضاها افزایش یافته و بررسیهای گستردهای درباره تأثیر فضا بر ادراک انسان، انجام شده است. عوامل مختلفی بر کیفیت فضای شهری تأثیر میگذارند که کیفیت بصری یکی از آنهاست. در این راستا هدف جستجوی رابطه میان فرم و کالبد شهر و کیفیت بصری آن است. برای تبدیل کیفیت بصری به ابعاد کمی و قابل سنجش از ابزار ایزوویست[i] در نرمافزار Syntax2D[ii] استفاده شده است، تحلیل شبکه شهری با بررسی دو مسیر با فرم متفاوت در بافت بوشهر انجام شده است. نتایج مطالعه نشان میدهد مسیرهای با فرم کالبدی متفاوت از کیفیت بصری متفاوتی برخوردارند و در طراحیهای شهری توجه به ابعاد و شاخص های بصری به خلق محیط مطلوبتر میانجامد. [i] ایزوویست یا سایه دید به نقاط قابل رؤیت از یک نقطه دید اطلاق میشود. [ii] نرمافزار Syntax2D ، برنامه تحلیل فضایی طراحی شده توسط دانشکده معماری و شهرسازی تابمن دانشگاه میشیگان است. پرونده مقاله -
دسترسی آزاد مقاله
16 - نقش درآمدهای پایدار توسعه شهری در برنامه ریزی فضایی – کالبدی
علیرضا عندلیب سید محمد علی ثابت قدمیکی از مقوله های حائز اهمیت در نیل به توسعه پایدار1 شهری، درآمدهای پایدار می باشد که نقش بسیار تاثیرگذار و تاثیرپذیری در برنامه ریزی فضایی- کالبدی2 شهرها دارد. از طرفی با توجه به اهمیت موضوع منافع عمومی و خصوصی در اتخاذ سیاست های توسعه شهری و با هدف شناخت روابط متقابل م چکیده کاملیکی از مقوله های حائز اهمیت در نیل به توسعه پایدار1 شهری، درآمدهای پایدار می باشد که نقش بسیار تاثیرگذار و تاثیرپذیری در برنامه ریزی فضایی- کالبدی2 شهرها دارد. از طرفی با توجه به اهمیت موضوع منافع عمومی و خصوصی در اتخاذ سیاست های توسعه شهری و با هدف شناخت روابط متقابل میان شاخص های موثر، این مقاله به بررسی موضوع در چارچوب نظریات حکومت های محلی، فدرالیسم مالی، فضاهای شهری، نابرابری اجتماعی، جدایی گزینی فضایی و محورهای عملکرد نظریه محتوایی (کالبدی) می پردازد. در این رابطه نظام تامین منابع مالی شهر با استقرار درآمدهای پایدار و لحاظ نگرش محله محوری مبتنی بر برنامه ریزی مشارکتی با حضور مدیران، متخصصان، شهروندان، سرمایه گذاران و موسسات مالی در قالب حکومت های محلی (مدیریت یکپارچه شهری) سازماندهی می گردد. از نتایج حاصله در بهبود توسعه ناموزون شهری برمبنای تعادل بخشی میتوان به فرهنگ سازی، آموزش، امنیت سرمایه گذاری، تدوین یکپارچه ضوابط و مقررات شهرسازی و مقررات مالی، پایداری کالبدی مبتنی بر شاخص های برنامه ریزی فضایی- کالبدی اشاره نمود. پرونده مقاله -
دسترسی آزاد مقاله
17 - اصول حاکم بر طراحی هدفمند محورهای دید شاخص شهری
محمدرضا پورجعفر علیرضا صادقیدر طراحی شهری و در فرآیند بهبود کیفیت محیط، ارتقا کیفیت بصری-کالبدی عرصه های عمومی شهر از جایگاه والایی برخوردار است. لذا طراحی آگاهانه و حفاظت از محور های دید به سوی ارزش های شاخص بصری، در ارتقا کیفیت بصری-کالبدی عرصه های عمومی نقشی غیر قابل انکار دارد. در این نوشتار چکیده کاملدر طراحی شهری و در فرآیند بهبود کیفیت محیط، ارتقا کیفیت بصری-کالبدی عرصه های عمومی شهر از جایگاه والایی برخوردار است. لذا طراحی آگاهانه و حفاظت از محور های دید به سوی ارزش های شاخص بصری، در ارتقا کیفیت بصری-کالبدی عرصه های عمومی نقشی غیر قابل انکار دارد. در این نوشتار به منظور شناخت و ارائه اصول حاکم بر طراحی آگاهانه و هدفمند محور های دید شاخص درون شهری، از طریق روش توصیفی و تحلیل محتوایی مرور متون و استفاده از اسناد تصویری، به باز شناخت ویژگی های مشترک محور های دید شاخص جهان پرداخته شده است. همچنین جایگاه محور دید در تحقق اهداف و مبانی نظری طراحی شهری مورد تدقیق قرار گرفته است. نتایج حاصل از این پژوهش ارائه معیار هایی نظیر ضرورت توجه به توپوگرافی و اختلاف سطح ها، محصوریت مطلوب، توجه به مکان رفتارها، تقویت حضورپذیری از طریق وجود فعالیت خاص در بدنه یا عنصر پایانی و استفاده از عناصر اکولوژیک هویتمند، در طراحی و ساماندهی محور های دید خواهد بود. پرونده مقاله -
دسترسی آزاد مقاله
18 - The Role of Structure in the Aesthetic Creation of Architectural Space
Fatemeh Nejati Farah Habib Azadeh Shahcheraghi: One of the tools for the architectural advent form is the structure, while architecture and structures, particularly in our sociable Iran, are separated from each other. Most successful buildings have dominating designers who are proficient in structural issues and ha چکیده کامل: One of the tools for the architectural advent form is the structure, while architecture and structures, particularly in our sociable Iran, are separated from each other. Most successful buildings have dominating designers who are proficient in structural issues and have a comprehension of the structural system's behavior. The extent of attention to the structure of the building will inevitably lead to beauty. If the structure has aesthetic considerations, a successful link between architecture and structure will occur. This research seeks to provide a solution and strategies to formulate both architecture and structure. The purpose of this paper is to articulate a sound and desired theoretical foundation in relation to the aesthetics of the architectural form and structure so that achieve a successful link between architecture and structure. The research methodology is applied in terms of the purpose of the research. The qualitative and quantitative research methodology is used to analyze the information as well as to provide analytical tables and matrix analysis in order to summarize the contents. The research has come to the conclusion that constructive requirements, along with functional requirements and aesthetic issues, bring together an unmatched effect. The study of successful works in the world suggests that if one of the subcategories of these three criteria works, it can be considered as one of the most successful buildings in the world. Formation of forces flow can be effective in the aesthetic structure of the structure. پرونده مقاله -
دسترسی آزاد مقاله
19 - Recognition the Sociological and Architectural Components based on Geographical Segmentation Technique by Value-normative Paradigm
Mobina Rouhi Darab Diba Naser FakouhiA house, as a primary dwelling is designed according to life style and current values in the life and mind of Residents. House is a cultural element, containing cultural meanings situated in the spirit of a house, distinguish the form of other houses. Special life style چکیده کاملA house, as a primary dwelling is designed according to life style and current values in the life and mind of Residents. House is a cultural element, containing cultural meanings situated in the spirit of a house, distinguish the form of other houses. Special life style and conduct of residents becomes value through time. This value organizes the meaning in the mind and determines meaning of life and appropriate physical space. In this paper, we have tried to study theories of a philosopher concerning meaning issue and meaning ontology, and meaning of life, and then, present components to evaluation the meaning in historical houses of Mazandaran. Indexes and questionnaire were used through the components. Six historical houses were selected to evaluate, filled by ten specialists for each house. This paper describes the theoretical framework by qualitative research approach and analysis method. It assesses qualitative components to quantitative components, based on the evidences and documents. Then, it provides reliable criteria. Research achievement presents the solution to design temporary houses based on linkage of meaning and form. پرونده مقاله -
دسترسی آزاد مقاله
20 - The Environmental and Social Manifestation ofIslamic-Iranian Urban and ArchitecturalConfiguration
Seyed Majid Mofidi ShemiraniRecent increased Islamic awakening in many Muslim societies, have given a momentum to rise of contextual necessity for Islamic culture. As religion and way of life, Islam framed in city. City morphology according to Islamic ideology has brought interest to the discussio چکیده کاملRecent increased Islamic awakening in many Muslim societies, have given a momentum to rise of contextual necessity for Islamic culture. As religion and way of life, Islam framed in city. City morphology according to Islamic ideology has brought interest to the discussion among the specialists and professionals involved in Muslim world for many decades, particularly in Iran. This goal can be achieved by experts and intellectuals and her particularity should be defined and illustrated. The present paper will attempt to synopsize and express some visions for contemporary and future urban form and architecture for Muslim cultures and societies principally for Iran. This research will try to pursue the main frameworks for the study of cultural fabrics reflecting on urban configuration, and also will delineate the qualities of spatial aspects, and make some recommendations at the end. This effort is a tentative rebirth which, it is hoped, will stimulate further discussion and research on the merits of the Islamicity. پرونده مقاله -
دسترسی آزاد مقاله
21 - Modeling Airflow in Urban Form against Sand Accumulation: a Case of Saltation in the Town of Timimoun in Southern Algeria
Djamel Mestoul Rafik Bensalem Luc AdolpheIn our present research, we focus on the modeling of airflow related to natural disasters, such assand accumulation, with urban form studies. The objective is to find which urban form can promote sand passing andreduce as much as possible stagnation of sand in the build چکیده کاملIn our present research, we focus on the modeling of airflow related to natural disasters, such assand accumulation, with urban form studies. The objective is to find which urban form can promote sand passing andreduce as much as possible stagnation of sand in the building area (streets, alleys, etc.). The urban form design will bediscussed through the simulation of airflow by using Computational Fluid Dynamics (CFD). In terms of simulation,we simulated the airflow behavior, which is responsible of sand stagnation in some specific configurations. A flatground was chosen with a first configuration, which was varied to test each time a current airflow behavior in thisconfiguration. This modeling is made possible following an appropriate turbulence model. In this study, a correlationwas made between urban wind speed and morphological parameters such as aspect ratio, building geometry andbuilding density. According to our theoretical references, this correlation shows that urban wind speed can help reducesand stagnation with proper values of these parameters. Therefore, through the urban form study we can promote windspeed and blow away the accumulated sand till the urban limits. پرونده مقاله -
دسترسی آزاد مقاله
22 - Analysis of Visual Impacts in Compact City’s Form
Nima MouhebatiDesired physical form of cities has been noticeable since the beginning of urbanization, from old patternsof early civilizations to the latest urbanism’s theories, which offered to build better cities. The opinions in recent decades haveexpressed that compact phys چکیده کاملDesired physical form of cities has been noticeable since the beginning of urbanization, from old patternsof early civilizations to the latest urbanism’s theories, which offered to build better cities. The opinions in recent decades haveexpressed that compact physical form of cities is a better form than sprawl form to achieve urban sustainability. The form of thecity is the embodiment of its physical form so in compact and sprawly form of city, it will be created various visual effects forthe residents. In this paper, visual impacts of cities’ form, which it caused by compression of their forms, examined withutilizing method of content analysis of texts. For this purpose, review the comments, which presented in the form of city,proving that the more compression the city is desirable for its better form. Among these theories, we used the elements of“Lynch’s” theory for a better cognition of the city. Finally, this article shows the desirability of the compact physical form ofcities for achieving better cognition of its form. پرونده مقاله -
دسترسی آزاد مقاله
23 - The Form of Residential Buildings on Local Winds: Air Pollution Reduction
Tina Sadat Sadrolgharavi Mohammad Javad MahdavinejadThis article addresses the analysis of the mechanism of natural air flow around the residential buildings and the effect of the form of residential buildings on air flow among four building forms in Tehran. The aim of this research is to study the effect of the form of چکیده کاملThis article addresses the analysis of the mechanism of natural air flow around the residential buildings and the effect of the form of residential buildings on air flow among four building forms in Tehran. The aim of this research is to study the effect of the form of residential buildings on the mechanism of natural air flow with the purpose of optimally utilizing clean air. The research method is to use computer modeling and model analysis in the related software and conclusions have been achieved using comparison of outputs of the models produced. Accordingly, four samples were first selected from software forms and modeled in one commercial micro-climate simulator software. They were tested by entering Tehran climatic data and results were extracted as simulation images. Since the analysis was conducted in one hour interval in the morning of the 23rd of December 2013 among four selected forms. The results helped us to choose the optimal form among these cases. Thus, a general rule was not given regarding the case that the selected form is the best in all aspects. Research achievements indicate that building forms have a significant effect on local winds and air pollution reduction. Therefore, the general form of buildings affects the degree and type of pollution dispersion due to carbon dioxide and the retention effect of suspended particles. پرونده مقاله -
دسترسی آزاد مقاله
24 - Technology and Urban Form: A Philosophical and Historical Perspective
Abbas ShiehUrban form has undergone tremendous changes throughout history. These changes have stemmedfrom various causes. Technology has been one of the most influential forces in changing the face of cities, leavingdifferent marks on the city form. In fact, technology has gained چکیده کاملUrban form has undergone tremendous changes throughout history. These changes have stemmedfrom various causes. Technology has been one of the most influential forces in changing the face of cities, leavingdifferent marks on the city form. In fact, technology has gained an increasingly more important and integrative rolein bringing changes to the urban form. In addition, recent plethora of developments and advances in various fieldsof technology more than before necessitates an examination of the relationship between technology and urban form.However, such an inquiry should be based on an understanding of the underlying philosophical and historical foundationsunderlying such a relationship. Throughout human history, a direct relationship has existed between the philosophicaloutlook on the world, the view on technology and its application, technological developments and consequently theireffects on the city. The first step in understanding the relationship between technological developments and urban formchanges and also in explaining the philosophical tenets, underlying urban form changes throughout history, is to realizethe nature and philosophy of technology per se. The present study aims to facilitate and present such an understandingin order to broaden the horizons projecting the relationship between technology and urban form. پرونده مقاله -
دسترسی آزاد مقاله
25 - روش جدید تفاضلات متناهی ضمنی برای حل معادلات دیفرانسیل جزئی مرتبه کسری زمان- مکان دوطرفه
حمید رضا خدابنده لو الیاس شیوانیان شعبان مصطفائیمعادلات دیفرانسیل جزئی مرتبه کسری تعمیمی از معادلات دیفرانسیل جزئی کلاسیک میشد. تاریخ حساب دیفرانسیل کسری، تقریبا هم قدمت حساب دیفرانسیل مرتبهی صحیح است، حساب دیفرانسیل و انتگرال کسری زمینهای از مطالعات ریاضی است که از تعاریف اولیه، از عملگرهای مشتق و انتگرال حساب دی چکیده کاملمعادلات دیفرانسیل جزئی مرتبه کسری تعمیمی از معادلات دیفرانسیل جزئی کلاسیک میشد. تاریخ حساب دیفرانسیل کسری، تقریبا هم قدمت حساب دیفرانسیل مرتبهی صحیح است، حساب دیفرانسیل و انتگرال کسری زمینهای از مطالعات ریاضی است که از تعاریف اولیه، از عملگرهای مشتق و انتگرال حساب دیفرانسیل و انتگرال معمولی به وجود آمده است. هرچند بخاطر فقدان سابقه ی کاربردی، حساب دیفرانسیل کسری پیشرفت کمی داشته است .بعلاوه این مدلها در موضوعاتی مثل جریانات سیال و... کاربرد دارد. در این مقاله، ما بعضی از روشهای کاربردی را برای حل معادلات دیفرانسیل جزئی کسری زمانی با مقادیر اولیه و مرزی با ضرایب متغییر روی دامنهی متناهی مورد استفاده قرار دادهایم. سازگاری، پایداری و در نتیجه همگرایی روش را اثبات کرده، و نشان داده ایم که روش کرانک - نیکلسون کسری با تقریب گرانوالد انتقال یافته بدون شرط پایدار است. این پژوهش از هردوجنبهی تئوری و عددی حائز اهمیت می باشد، که در اینجا ما با ساختمان و تحلیل همگرایی الگوهای گسسته سازی سروکار داریم. و همچنین نتایج عددی ارائه و از نظر مرتبه همگرایی با جواب تحلیلی دقیق مقایسه گردیده است. پرونده مقاله -
دسترسی آزاد مقاله
26 - فرم رد جیکوبسن تعمیمیافته
امیرحسین نخودکارنظریهی فرمهای هرمیتی به عنوان تعمیمی طبیعی از نظریهی فرمهای مربعی، با جایگذاری میدان زمینه با یک جبر تقسیم مجهز به برگردان، ظاهر میشود. با توجه به این مطلب، یک مسألهی مهم در نظریهی فرمهای هرمیتی، نسبت دادن فرمهای مربعی به این فرمهاست، به گونهای که برخی از خوا چکیده کاملنظریهی فرمهای هرمیتی به عنوان تعمیمی طبیعی از نظریهی فرمهای مربعی، با جایگذاری میدان زمینه با یک جبر تقسیم مجهز به برگردان، ظاهر میشود. با توجه به این مطلب، یک مسألهی مهم در نظریهی فرمهای هرمیتی، نسبت دادن فرمهای مربعی به این فرمهاست، به گونهای که برخی از خواص آن را بازتاب دهد. نخستین گام در این راستا توسط جیکوبسن برداشته شد. در [5] وی به هر فرم هرمیتی متقارن روی یک جبر کواترنیون با برگردان کانونی در مشخصهی مخالف دو، یک فرم مربعی روی میدان زمینه نسبت داد. این فرم که به نام فرم رد جیکوبسن شناخته میشود، فرمهای هرمیتی مذکور را به طور کامل ردهبندی میکند. پس از آن، این فرم توسط ساه در [10] به مشخصهی دو تعمیم داده شد. وی نشان داد خواص اساسی فرم رد جیکوبسن، در تعمیم به مشخصهی دو نیز برقرارند. همچنین با استفاده از این فرم، ساه تجزیهای برای فرمهای هرمیتی روی یک جبر سادهی مرکزی از درجهی حداکثر چهار با u-ناوردای پایین به دست آورد. فرم رد جیکوبسن تاکنون در مقالات بسیاری به کار رفته که از آن جمله میتوان به [1]، [2]، [3]، [8] و [9] اشاره کرد. در این مقاله، فرم رد جیکوبسن را به فرمهای هرمیتی پادمتقارن روی جبرهای تقسیم با برگردان متعامد در مشخصهی دلخواه تعمیم میدهیم. همچنین ثابت میکنیم یک فرم هرمیتی ایزوتروپ (متابولیک) است اگر و تنها اگر فرم رد آن ایزوتروپ (متابولیک) باشد. به علاوه، نشان خواهیم داد فرم رد تعمیمیافته، ردهی طولپایی فرمهای هرمیتی مذکور را به طور کامل مشخص میکند. پرونده مقاله -
دسترسی آزاد مقاله
27 - ناپایداری تورینگ و نقش های فضایی در مدل های کنش-انتشار
علی عطابیگینقش ها همه جا در طبیعت وجود دارند و تحقیقات پنجاه سال اخیر فهم ما را نسبت به مکانیسم های تشکیل آنها تا حد زیادی افزایش داده اند. هدف از این مقاله مطالعه سیستم هایی است که در آنها نقش های فضایی پایدار بطور موقتی شکل می گیرند. بطور خاص، تأکید ویژه بر ناپایداری های تورینگ چکیده کاملنقش ها همه جا در طبیعت وجود دارند و تحقیقات پنجاه سال اخیر فهم ما را نسبت به مکانیسم های تشکیل آنها تا حد زیادی افزایش داده اند. هدف از این مقاله مطالعه سیستم هایی است که در آنها نقش های فضایی پایدار بطور موقتی شکل می گیرند. بطور خاص، تأکید ویژه بر ناپایداری های تورینگ بعنوان متداول ترین مکانیسم تشکیل نقش ها خواهد بود. مدل گیرر-ماینهارت یکی از نمونه های اولیه سیستم های کنش انتشار است که پدیده تشکیل نقش را در فرایندهای طبیعی توصیف میکند. آنالیز انشعاب، بصورت تئوری و عددی، روی این مدل انجام میشود و اثر انتشار بر پایداری حالت تعادل آن بررسی میشود. نشان داده میشود که تحت شرایط خاصی، ناپایداری ناشی از انشعاب یا ناپایداری تورینگ در حالت تعادلی که در غیاب انتشار پایدار است، اتفاق می افتد. پرونده مقاله -
دسترسی آزاد مقاله
28 - ابررویه های هاف از فضا فرم ساساکی با عملگر ریچی موازی اسماعیل عابدی، محمد المکچی
اسماعیل عابدی محمد المکچیفرض کنیدM^2n یک ابررویه هاف با عملگر ریچی موازی و مماس بر میدان برداری ساختاریξ در فضا فرم ساساکی M ̃^(2n+1) (c) باشد. ابتدا نشان میدهیم ابررویهها و ابررویههای هاف در فضا فرم ساساکی دارای چه ساختار و خواصی هستند. سپس ساختار ابررویه ها و ابررویههای هاف را با داشتن چکیده کاملفرض کنیدM^2n یک ابررویه هاف با عملگر ریچی موازی و مماس بر میدان برداری ساختاریξ در فضا فرم ساساکی M ̃^(2n+1) (c) باشد. ابتدا نشان میدهیم ابررویهها و ابررویههای هاف در فضا فرم ساساکی دارای چه ساختار و خواصی هستند. سپس ساختار ابررویه ها و ابررویههای هاف را با داشتن ساختار عملگر ریچی موازی مورد بررسی قرار داده و نشان میدهیم دو حالت پیش میآید، در حالت اول عملگر شکل A از M^2n دارای خمیدگیهای اصلی ثابتی هستند و حداکثر دارای سه مقدار ویژه متمایز هست. در حالت دوم عملگر شکل A روی D متحد با صفر است و M^2n دارای یک خمینه انتگرال که ساختار فضا فرم ساساکی میپذیرد را داراست. سپس ابتدا با تعریف یک میدان برداری درM^2n نشان میدهیم که خم انتگرال این میدان برداری درM^2n ژئودزی بوده و همچنین با تعریف یک ابررویه در M^2n نشان میدهیم این ابررویه در M^2n تماما ژئودزیک بوده و در نهایت نشان میدهیم که M^2n بطور موضعی بصورت حاصلضرب این رویه تماما ژئودزیک با خم ژئودزی میباشد. پرونده مقاله -
دسترسی آزاد مقاله
29 - یک روش تندترین کاهش بدون جستجوی خطی برای حل مسائل بهینهسازی نامقید
نرگس بیدآبادیدر این مقاله به حل مسئله بهینه سازی نامقید با استفاده از یک روش تندترین کاهش بدون استفاده از الگوریتمهای جستجوی خطی میپردازیم. ابتدا یک فرمول شبه نیوتن مقیاس بندی شده دو پارامتری برای محاسبه تقریبی از ماتریس هسی ارائه میدهیم. تقریب به دست آمده از این فرمول، یک ماتری چکیده کاملدر این مقاله به حل مسئله بهینه سازی نامقید با استفاده از یک روش تندترین کاهش بدون استفاده از الگوریتمهای جستجوی خطی میپردازیم. ابتدا یک فرمول شبه نیوتن مقیاس بندی شده دو پارامتری برای محاسبه تقریبی از ماتریس هسی ارائه میدهیم. تقریب به دست آمده از این فرمول، یک ماتریس معین مثبت است که در رابطه سکانت استاندارد صدق مینماید. همچنین نشان میدهیم که بزرگترین مقدار ویژه این ماتریس از تعداد متغیرهای مسئله بیشتر نخواهد بود. سپس با استفاده از این فرمول شبه نیوتن مقیاس بندی شده دو پارامتری، فرمول صریحی برای محاسبه طول گام در روش تندترین کاهش ارائه میشود و بنابراین این روش نیازی به استفاده از روشهای تقریبی برای محاسبه طول گام نخواهد داشت. نتایج عددی به دست آمده از اجرای الگوریتم در محیط نرم افزاری متلب بر روی برخی مسائل بهینه سازی ارائه شده است. این نتایج کارایی روش ارائه شده نسبت به سایر روشهای موجود را نشان میدهد. پرونده مقاله -
دسترسی آزاد مقاله
30 - حل عددی مسأله ریلی- استوکس کسری با استفاده از توابع پایه شعاعی مکان- زمان
نفیسه نقره ای اصغر کرایه چیان علیرضا سهیلیدر این مقاله، جواب مسأله دو بعدی ریلی- استوکس برای یک جریان گرمایی درجه دوم تعمیم یافته با مشتق کسری ‏‎را‎‏ تقریب میزنیم. ‏این تقریب بر پایه استفاده از توابع ‏پایه شعاعی (‏RBFs‏) مکان- زمان و روش انتگرال گیری عددی سینک میباشد. در این رو چکیده کاملدر این مقاله، جواب مسأله دو بعدی ریلی- استوکس برای یک جریان گرمایی درجه دوم تعمیم یافته با مشتق کسری ‏‎را‎‏ تقریب میزنیم. ‏این تقریب بر پایه استفاده از توابع ‏پایه شعاعی (‏RBFs‏) مکان- زمان و روش انتگرال گیری عددی سینک میباشد. در این روش، از تابع پایه ‏شعاعی گاوسین استفاده شده و بین متغیرهای زمان و مکان تمایز قائل نمیشویم و نقاط هممحلی‏، هم شامل مختصات ‏زمان و هم شامل مختصات ‏مکان هستند.‏ از روش انتگرال گیری عددی سینک با تبدیل نمایی یگانه برای تقریب قسمت انتگرالی مشتق کسری استفاده ‏‏میکنیم. ‏مشتق کسری، ریمان- لیوویل انتخاب شده است.روش ارائه شده روی دو مثال با مقادیر مختلف برای مرتبه مشتق کسری، پیاده سازی شده که نتایج حاصل، اثر بخشی روش را تأیید میکند ‏و نشان میدهد که با استفاده از تعداد کمی از نقاط هممحلی برای تابع پایه شعاعی میتوان نتایج دقیقی بدست آورد‏.‏ لازم به ذکر است که تمامی ‏محاسبات با کمک نرم‎ ‎افزار متمتیکا انجام شده است.‏ پرونده مقاله -
دسترسی آزاد مقاله
31 - نظم عمومی و نقش آن بر امور شکلی داوری
مرتضی شهبازی نیا سعید بازگیرداوریبه عنوانمکانیسمجایگزینسیستمقضاییازامتیازاتبالاییچونسرعت،ترکتشریفات،تخصص،کارآئیوهزینهکمترنسبتبهسایرراهکارهابرخورداراست. درعینحالاینمکانیسم می توانددرغیابنظارتوبررسیبهعنوانتهدیدنظمعمومیشناختهشود. نظمعمومیبه عنوانقواعدآمرهنظامحقوقیوسایرمبانیغیرمدونهمچوناخلاقحسنهازارز چکیده کاملداوریبه عنوانمکانیسمجایگزینسیستمقضاییازامتیازاتبالاییچونسرعت،ترکتشریفات،تخصص،کارآئیوهزینهکمترنسبتبهسایرراهکارهابرخورداراست. درعینحالاینمکانیسم می توانددرغیابنظارتوبررسیبهعنوانتهدیدنظمعمومیشناختهشود. نظمعمومیبه عنوانقواعدآمرهنظامحقوقیوسایرمبانیغیرمدونهمچوناخلاقحسنهازارزش هاییحمایتمی کندکهدرمقابلهرارادهوتصمیمخصوصیبرتریدارد. اینارادهوتوافقمی تواندقالبقراردادداشتهباشدیاقالبرایداور. درهرصورتچنانچهدرحوزهخصوصیتصمیمیمخالفنظمعمومیاتخاذشود،آنتصمیمنامعتبرتلقیمی شود. درقالبمکانیسمداوری،فرآیندهاوموضوعاتشکلیازجملهانتخابداوران،دادرسیداوری،ادلهاثباتدرداوریواجرایرایداوریظهوروبروزمی نمایدکههرکدامازاینفرآیندهاازمنظرنظمعمومیقابلبررسیهستندچراکهدرامورشکلینیزتخطیازنظمعمومیشکلی،موجباتبطلانارادهخصوصیرابوجودخواهدآورد. پرونده مقاله -
دسترسی آزاد مقاله
32 - کاربرد تئوری بازی ها در ارزیابی سرمایه گذاری در سهام
غلامرضا اسلامی بیدگلی رضا احتشام راثیدر محیط پر از چالش دنیای امروز بنگاه های اقتصادی ب ه شدت در رقابت با یکدیگرمی باشند و نم یتوان تنها با استفاده از روش های تصمیم گیری سنتی در شرایط اطمینان،ریسک و عدم اطمینان برای مواجهه با رقبای داخلی و خارجی ، تصمیمات صحیحی رااتخاذ نمود، لذا شناخت فنون نوین در شرایط تع چکیده کاملدر محیط پر از چالش دنیای امروز بنگاه های اقتصادی ب ه شدت در رقابت با یکدیگرمی باشند و نم یتوان تنها با استفاده از روش های تصمیم گیری سنتی در شرایط اطمینان،ریسک و عدم اطمینان برای مواجهه با رقبای داخلی و خارجی ، تصمیمات صحیحی رااتخاذ نمود، لذا شناخت فنون نوین در شرایط تعارض برای مقابله با رقبا بیش از پیشاحساس می گردد. استفاده از این قبیل فنون به ارزیابی اقتصادی سرمایه گذاری درسهام ومدیریت ریسک کمک نموده و سرمایه گذار را در تصمیم گیری بهتر کمک می کند . باتوجه به اینکه سرمایه گذاری در کشورهای در حال توسعه ب ه علت وجود متغیرهایفراوان و نا شناخته با مخاطرات بسیار زیادی مواجه است و رقبای فراوانی نیز در آنحضور دارند، شناخت روش هایی مانند تئوری بازی ها و بکارگیری آن برای موفقیت درمواجهه با رقبای متعدد در بازارهای کنونی لازم و ضروری بنظر می آید . مقاله حاضر ،ارزیابی اقتصادی گزینه ها در رقابت با سایر رقبا را در ابعاد سرمایه گذاری و اتخاذتصمیمات صحیح و بهنگام برای واکنش در برابر رقبا را با کمک روش تئوری بازی هابررسی می نماید. مقاله حاضر سعی بر آن دارد با استفاده از مدلهای تئوری بازی ها، منافعهمه طرفین رقابت در ارزیابی اقتصادی گزینه های سرمایه گذاری را تامین نموده و آنها را به تعادل در منافع حاصل برساند به نحویی که همه طرفین احساس رضایت و خشنودینمایند. نتایج مطالعه، شواهد لازم برای کاربرد تئوری بازیها را در ارزیابی راه کارهایسرمایه گذاری از جمله سهام ارائه داده است. پرونده مقاله -
دسترسی آزاد مقاله
33 - تخمین حداقل معاش (خط فقر) خانوارهای شهری و روستایی استان خراسان رضوی با استفاده از سیستم مخارج خطی با شکلگیری عادت
محمد حیدری ابوالفضل سامیدر این پژوهش حداقل معاش خانوارهای شهری و روستایی استان خراسان رضوی را به عنوان سنجهای نسبی وذهنی از خط فقر، به همراه چند شاخص فقرطی دورهی زمانی 1389- 1369 با بهرهگیری از سیستم مخارج خطی پویا با فرض شکلگیری عادات (HLES) و روش رگرسیونهای به ظاهر نامرتبط تکراری(ISUR) چکیده کاملدر این پژوهش حداقل معاش خانوارهای شهری و روستایی استان خراسان رضوی را به عنوان سنجهای نسبی وذهنی از خط فقر، به همراه چند شاخص فقرطی دورهی زمانی 1389- 1369 با بهرهگیری از سیستم مخارج خطی پویا با فرض شکلگیری عادات (HLES) و روش رگرسیونهای به ظاهر نامرتبط تکراری(ISUR) برآورد نموده ایم. دادههای مورد استفاده در این پژوهش شامل دادههای بودجه (درآمد- هزینه) خانوارهای شهری و روستایی استان خراسان رضوی و شاخصهای قیمت مربوطه میباشد. برآورد براساس شش گروه کالایی صورت گرفته است. یافتههای پژوهش نشان میدهد که حداقل معاش سالانهی کل(خط فقر) درطول دوره برای مناطق شهری وروستایی استان ازروندی فزاینده برخوردار است. با توجه به حداقل معاش محاسبه شده، شاخصهای نسبت سرشمار، نسبت شکاف درآمدی، نابرابری درآمد بین فقرا وکاکوانی نیز برای مناطق شهری و روستایی محاسبه شده که نتایج در کل حکایت از بدتر شدن وضعیت خانوارهای شهری و تاحدودی خانوارهای روستایی درطی دورهی مورد مطالعه دارد پرونده مقاله -
دسترسی آزاد مقاله
34 - تدوین استراتژی نظام مدیریت ارتباط با مشتری با رویکرد کارت امتیازی متوازن در شرکت ساپکو
جلال حقیقت منفرد الهام سرایی نیاامروزه سازمان ها مشتریان را محور تمام فعالیت های خود قرار داده و استراتژی های بازاریابی و فروش خود را بر این اساس تنظیم می کنند. در همین راستا یکی از چالش های اصلی بنگاه های اقتصادی، تدوین استراتژی نظام مدیریت ارتباط با مشتری است. مطالعات نشان داده که سازمان هایی که در چکیده کاملامروزه سازمان ها مشتریان را محور تمام فعالیت های خود قرار داده و استراتژی های بازاریابی و فروش خود را بر این اساس تنظیم می کنند. در همین راستا یکی از چالش های اصلی بنگاه های اقتصادی، تدوین استراتژی نظام مدیریت ارتباط با مشتری است. مطالعات نشان داده که سازمان هایی که در تدوین استراتژی های خود از رویکرد کارت امتیازی متوازن استفاده می نمایند در اجرای استراتژی های خود موفق تر هستند. تلفیق کارت امتیازی متوازن با نظام مدیریتی ارتباط با مشتریان به عنوان یکی از ابزارهای قوی تدوین استراتژی نظام مدیریت ارتباط با مشتری قابل استفاده می باشد. این کارت طرح های مدیریت ارتباط با مشتری را به عوامل کلیدی موفقیت و معیارهای عملکردی تبدیل و نهایتا منجر به تدوین برنامه های اجرایی می گردد. این مقاله، در قالب یک مطالعه موردی سعی در ارائه یک متدولوژی ابتکاری برای تدوین استراتژی نظام مدیریت ارتباط با مشتری با رویکرد کارت امتیازی متوازن دارد. در این تحقیق پس از شناسایی ماموریت، چشم انداز و استراتژی های فعلی سازمان، اهداف استراتژیک نظام مدیریت ارتباط با مشتری برای هر یک از جنبه های کارت امتیازی متوازن شناسایی شد، سپس عوامل کلیدی موفقیت درنظام مدیریت ارتباط با مشتری تعیین گردید و پس از غربال گری آن ها با روش فازی، شاخص های کلیدی عملکرد برای هریک از این عوامل مشخص، و سپس با استفاده از روش فرآیند تحلیل سلسله مراتبیاولویت بندی شد. در ادامه، کارت امتیازی متوازن و نقشه استراتژی نظام مدیریت ارتباط با مشتری تنظیم، و برای هر یک از عوامل کلیدی موفقیت، برنامه اقدام اجراییتدوین گردید. پرونده مقاله -
دسترسی آزاد مقاله
35 - معرفی فلور، شکل زیستی و پراکنش جغرافیایی گیاهان حوزه آبخیز ایور
حمید علی پور آرش ملکیان میرمسعود خیرخواه زرکش سعید قره چلواین تحقیق سعی بر معرفی لیست فلورستیک منطقه ایور واقع در استان خراسان شمالی داشت. گیاهان با استفاده از پیمـایش صـحرایی جمـع آوری و شناسایی شدند. نمونه های جمع آوری شده با کمک منابع تاکسونومی در حد گونه شناسایی شدند. همچنین کاربرد گونه های گیاهی و میزان خـوشخـوارکی آنها ب چکیده کاملاین تحقیق سعی بر معرفی لیست فلورستیک منطقه ایور واقع در استان خراسان شمالی داشت. گیاهان با استفاده از پیمـایش صـحرایی جمـع آوری و شناسایی شدند. نمونه های جمع آوری شده با کمک منابع تاکسونومی در حد گونه شناسایی شدند. همچنین کاربرد گونه های گیاهی و میزان خـوشخـوارکی آنها برای دام های منطقه با پرسش از مردم بومی مشخص شد. نتایج نشان داد که 109 گونه متعلق به 24 تیره گیاهی در منطقه وجـود دار د. بـزر گتـرین تیره های گیاهی منطقه از لحاظ تعداد گونه شامل Asteraceae (21 گونـه)، Poaceae (15 گونـه)، Lamiaceae (10 گونـه)، Caryophyllaceae و (6 گونه) Brassicaceae (6 گونه) بودند. تعداد 32 گونه با ارزش کاربری علوفه ای بیشترین ارزش را از نظر کاربری به خود اختصاص دادند. 33 گونه بـر اساس پایداری یا طول عمر گونه های گیاهی یکساله، 4 گونه دوساله و 27 گونه چندساله در منطقه شناسایی گردید. تعداد 17 گونه با شکل رویشی علفـی پهن برگ بیشترین شکل رویشی حوزه را به خود اختصاص داداند. 59 گونه از نظر خوشخوراکی در کلاس مرتعی III بـا ارزش کـم و41 گونـه در کـلاس مرتعی II با ارزش متوسط قرار گرفتند. همیکریپتوفیت ها با 35 گونه، تروفیت با 62 گونه و کامفیـت بـا 31 گونـه بـه ترتیـب بیشـترین شـکل زیسـتی و همچنین گیاهان ایران-تورانی با 97 گونه، ایران-تورانی و صحارا-سندی با 9 گونه و ایران-تورانی و مدیترانه ای با 8 گونـه بـه ترتیـب بیشـترین پـراکنش جغرافیایی را در منطقه به خود اختصاص دادند. گونه های غیرخوش خوراک بر اساس نتایج به دلیل فشار زیاد بر مراتع در منطقه گسترش یافته اند کـه بایـد اقدامات مدیریتی برای جلوگیری از این روند صورت گیرد تا تنوع گیاهی در خطر نابودی قرار نگیرد. پرونده مقاله -
دسترسی آزاد مقاله
36 - بررسی اثر ضایعات روکش مالمینه بر ویژگیهای فیزیکی و مکانیکی تخته فیبر نیمه سنگین (MDF)
فاطمه رمضانیان ثانی علی اکبر عنایتیبرای بررسی اثر استفاده از ضایعات روکش ملامینه بر ویژگی های فیزیکی و مکانیکی تخته فیبر نیمه سنگین (MDF)، از مخلوط ضایعات روکش ملامینه به صورت آسیاب شده و الیاف چوبی مورد در صنعت به نسبت 0/100، 10/90، 20/80 و 30/70 استفاده شد. پس از چسب زنی الیاف با چسب اوره فرم آلدهید چکیده کاملبرای بررسی اثر استفاده از ضایعات روکش ملامینه بر ویژگی های فیزیکی و مکانیکی تخته فیبر نیمه سنگین (MDF)، از مخلوط ضایعات روکش ملامینه به صورت آسیاب شده و الیاف چوبی مورد در صنعت به نسبت 0/100، 10/90، 20/80 و 30/70 استفاده شد. پس از چسب زنی الیاف با چسب اوره فرم آلدهید و به مقدار 10 درصد (به نسبت وزن خشک الیاف) کیک الیاف در پرس آزمایشگاهی با دمای 170 درجه سانتی گراد تحت فشار 35 تا 40 بار و زمان پرس 6 دقیقه تا ضخامت 15 میلی متر فشرده شدند. نتایج به دست آمده از اندازه گیری ویژگی های فیزیکی و مکانیکی تخته ها نشان داد که افزایش میزان ضایعات روکش های ملامینه در تخته ها موجب افزایش مقاومت خمشی، مدول الاستیسیته و چسبندگی داخلی گردید، درحالی که واکشیدگی ضخامت بعد از 2 و 24 ساعت غوطه وری کاهش پیدا کرد. بنابراین یافته های تحلیل آماری پژوهش حاضر نشان داد که بهترین تیمار در این تحقیق استفاده از 20 درصد ضایعات روکش های ملامینه در ساخت تخته فیبر نیمه سنگین می باشد، چرا که ضمن دستیابی به حد مطلوب ویژگی های فیزیکی و مکانیکی تعیین شده در استاندارد مربوط به این نوع تخته ها می توان از هدررفت ضایعات و آلودگی محیط زیست جلوگیری کرد. پرونده مقاله -
دسترسی آزاد مقاله
37 - Solvent effects on protonation and complexation of histidine with molybdenum (VI) at different aqueous solutions of methanol
Farrokh Gharib Nayyer Farkhad-AaliThe formation constants of the species formed in the systems H+ + Mo(VI) + histidine and H+ +histidine have been determined at different aqueous solutions of methanol (0 - 45 % v/v) at 25 °C andconstant ionic strength (0.1 mol dm-3 sodium perchlorate), using a combi چکیده کاملThe formation constants of the species formed in the systems H+ + Mo(VI) + histidine and H+ +histidine have been determined at different aqueous solutions of methanol (0 - 45 % v/v) at 25 °C andconstant ionic strength (0.1 mol dm-3 sodium perchlorate), using a combination of spectrophotometricand potentiometric techniques. The composition of the complex species was determined by thecontinuous variations method (Job). It was shown that molybdenum (VI) forms a mononuclear 1:1complex with histidine of the type MoO3L- at pCH 5.8. The protonation of histidine and the formationconstant of the formed complex species in various media were analyzed in terms of Kamlet, Abboud,and Taft (KAT) parameters. Single-parameter correlation of the formation constant versus (hydrogen-bond donor acidity), (hydrogen-bond accepter basicity) and * (dipolarity/polarizability)are poor in all solutions, but dual-parameter correlation represents significant improvement withregard to the single or multi-parameter models. Linear correlation is observed when the experimentallog KS values are plotted versus the calculated ones while the KAT parameters are considered.Finally, the results are discussed in terms of the effect of solvent on protonation and complexation. پرونده مقاله -
دسترسی آزاد مقاله
38 - DFT Study of 1H-tetrazolyl derivatives of tetrahedrane
Mehdi Nabati Mehrdad MahkamTetrazole-containing compounds have been the subject of much recent research because of theirpotential as high energy density materials (HEDMs). In this work, theoretical studies on the 1Htetrazolylderivatives of tetrahedrane were done at the density functional theory ( چکیده کاملTetrazole-containing compounds have been the subject of much recent research because of theirpotential as high energy density materials (HEDMs). In this work, theoretical studies on the 1Htetrazolylderivatives of tetrahedrane were done at the density functional theory (DFT) method withthe 6-31G(d) basis set without any symmetrical restrictions in order to find the structural andenergetically properties. Geometric and electronic structures, natural bond orbitals (NBOs)population, aromaticity of tetrazole rings, thermodynamic properties and detonation performances ofthese molecules have been studied using mentioned level of theory. Nucleus independent chemicalshift (NICS) calculations show the tetrazole rings on the tetrahedrane system are aromatic. The heatof formation (HOF) values of all structures has been calculated by a proper isodesmic reaction. TheHOFs are found to be correlative with the number of tetrazole groups. According to the results of thecalculations, only tri-substituted derivative of tetrahedrane can be a viable candidate of high energymaterials. پرونده مقاله -
دسترسی آزاد مقاله
39 - Synthesis of TiO2 nanoparticles in pure 2-hydroxyethylammonium formate room temperature ionic liquid and investigation of its photocatalytic properties
Mohammad Khodadadi Moghaddam Fatemeh Fallah Iri SolaTiO2 nanoparticles were synthesized by modified sol—gel method using pure room temperature ionic liquid(RTIL) 2-hydroxyethylammonium formate as a reaction medium. The structure and morphology of TiO2nanoparticles were characterized with X-ray powder diffraction (X چکیده کاملTiO2 nanoparticles were synthesized by modified sol—gel method using pure room temperature ionic liquid(RTIL) 2-hydroxyethylammonium formate as a reaction medium. The structure and morphology of TiO2nanoparticles were characterized with X-ray powder diffraction (XRD), BET surface analysis and scanningelectron microscopy (SEM). TiO2 nanoparticles were synthesized in open and closed vessels. The TiO2nanoparticles prepared in open vessel present only anatase crystal phase after calcination at 500°C but the TiO2prepared in closed vessel presents anatase and rutile phases after calcination at 500°C. The photocatalyticefficiency decreases with increasing of ethanol and water as molecular solvent in preparation step ofnanoparticles. The degradation percent can reach over 97% at the optimal catalyst concentration (2.0 g/L) in 120minutes irradiation. پرونده مقاله -
دسترسی آزاد مقاله
40 - The investigation of ionic association in the CdF2 solution with the mixed solvent (water +ethanol +propanol) at 25°C
M. Aghaie T. JaliliUsing the mixed solvents, (water +ethanol + propanol), the solubility of CdF2 was determined byevaporating method at 25° C. The results showed that the sollbility, s, of CdF2 decreases bydecreasing the dielectric constant of the mixed solvent .Once the solubility of چکیده کاملUsing the mixed solvents, (water +ethanol + propanol), the solubility of CdF2 was determined byevaporating method at 25° C. The results showed that the sollbility, s, of CdF2 decreases bydecreasing the dielectric constant of the mixed solvent .Once the solubility of CdF2 was determined,the concentration solubility product, Ksp(c)=4s3, was calculated .Furthermore ,by estimating the meanactivity coefficient, f± , of CdF2 in the solution upon the extended Debye-Hückel theory, the modelsolubility Product constant of the salt, Ksp(m)=4s3 f±3 was calculated .On the other hand we concludedthe equilibrium constant of ion pair formation , KIP, on the basis of Fuoss contact ion pair model andwe obtained the value of ion pair concentration in the mixed solvents, (water 85% +ethanol l5% +propanol 10%). The value of thermodynamic solubility product constant, Ksp(th), of CdF2 in the mixedsolvent was evaluated at zero ionic strength upon the extrapolation method and the value of ion pairconcentration was calculated in the considered solution and compared by fuoss model. پرونده مقاله -
دسترسی آزاد مقاله
41 - جایگاه جریان سازی خبری روابط عمومی ها در جامعه
افشین محمدی افسانه مظفری رها خرازی محمدوندی آذرامروزه اهمیت رسانه ها از جمله روابط عمومی ها بعنوان یک رسانه سازمانی در شکل دهی و هدایت افکار عمومی و جریان سازی رویدادهای سیاسی، اجتماعی، اقتصادی و … بر هیچ کس پوشیده نیست، شاید تا چندی پیش محوری ترین نقشی که برای روابط عمومی متصور بودند صرفاً اطلاع رسانی از روی چکیده کاملامروزه اهمیت رسانه ها از جمله روابط عمومی ها بعنوان یک رسانه سازمانی در شکل دهی و هدایت افکار عمومی و جریان سازی رویدادهای سیاسی، اجتماعی، اقتصادی و … بر هیچ کس پوشیده نیست، شاید تا چندی پیش محوری ترین نقشی که برای روابط عمومی متصور بودند صرفاً اطلاع رسانی از رویدادهای سازمانی بود.اما در حال حاضر روابط عمومی ها می توانند با ایجاد شرایطی از یک دستگاه اداری منفعل،تبدیل به "سازمان رسانه ای" هدایتگر و جریان ساز درفرایند تحول جامعه بسوی توسعه تبدیل شوند. هدف ازاین تحقیق بررسی جایگاه جریان سازی خبری روابط عمومی ها درتوسعه جامعه با متغییرهایی چون تبدیل شدن روابط عمومی ها به یک سازمان رسانه ای،بهره برداری از فناوری های نوین،استفاده از نیروی انسانی کارشناس و بهره گیری از قالب های متنوع ژورنالیستی است. این تحقیق به روش پیمایشی انجام گرفته است وابزار مورد استفاده در آن، پرسشنامه می باشد.جامعه آماری آن کارشناسان روابط عمومی وزارتخانه ها و سازمان های مستقر در شهر تهران به تعداد آن ها 600 نفر و حجم نمونه نیز به تعداد 200 است. نتایج تحقیق نشان می دهد که با تغییر و تحولات تکنولوژیکی که ایجاد شده،تبدیل شدن روابط عمومی به سازمان های رسانه ای و نیز استفاده از قالب های ژورنالیستی متنوع، می توان شاهد ایجاد جریان سازی خبری روابط عمومی ها با هدف نقش آفرین آنها در فرایند توسعه جامعه بود. پرونده مقاله -
دسترسی آزاد مقاله
42 - دیرینه شناسی دانش و گفتمان درآمدی بر نظریه گفتمان فوکو
سید وحید عقیلی امیر لطفی حقیقت -
دسترسی آزاد مقاله
43 - در باب ساختار و سخن داستان فرارفتن کارنپ از مرزهای ویتگنشتاینی
مجید داودی بنیدر این مقاله به بررسی قراردادگرایی کارنپی در مقابل پس زمینه ی غالب ویتگنشتاینی آن روزگارمی پردازیم، این پ سزمینه را کارنپ جز مگرایانه و غیرقابل قبول به شمار م یآورد. مقاله را با داستانرضایت مندی اولیه و نارضایتی نهایی تجربه گرایان از رویکرد تاتولوژیک ویتگنشتاین نسبت بهص چکیده کاملدر این مقاله به بررسی قراردادگرایی کارنپی در مقابل پس زمینه ی غالب ویتگنشتاینی آن روزگارمی پردازیم، این پ سزمینه را کارنپ جز مگرایانه و غیرقابل قبول به شمار م یآورد. مقاله را با داستانرضایت مندی اولیه و نارضایتی نهایی تجربه گرایان از رویکرد تاتولوژیک ویتگنشتاین نسبت بهصدق های منطقی و ریاضی آغاز م یکنیم. آن گاه موض عگیری کارنپ در مقابل دیدگاه مطل قگرایانهویتگنشتاین را بررسی می کنیم، دیدگاهی که از دید کارنپ عامل قراردادی در زبان را نادیدهمی گرفت. تلاش کارنپ برای ارائه ی تبینی مناسب که با سرشت قراردادی منطق و ریاضیات منطبقباشد، ما را به پرسش رابط هی بین بخش های زبانی و تجربی زبان رهنمون م یکند. به نظر می رسدکه این رابطه به شکلی قابل قبول در کتاب ساختار نحوی منطقی جهان تبین نمی شود. پرونده مقاله -
دسترسی آزاد مقاله
44 - پهنه بندی و برآورد کیفی فرسایش خاک در حوضهی آبریز مارون با استفاده ازمدل F.A.O
حمید بابلی موخر کورش شیرانی مرتضی خداقلیتهیۀ نقشۀ فرسایش خاک در حوضهها آبخیز مبنای اولویتبندی برنامهی حفاظت خاک است. هدف ازاین پژوهش بکارگیری مدل فرسایشی F.A.Oو ارزیابی متغیرهای آن بااستفاده از قابلیت GIS و تهیۀ نقشۀ فرسایش خاک حوضه آبخیز مارون میباشد. بدینمنظور پساز رقومیکردن نقشههای حوضه به مقیاس1: چکیده کاملتهیۀ نقشۀ فرسایش خاک در حوضهها آبخیز مبنای اولویتبندی برنامهی حفاظت خاک است. هدف ازاین پژوهش بکارگیری مدل فرسایشی F.A.Oو ارزیابی متغیرهای آن بااستفاده از قابلیت GIS و تهیۀ نقشۀ فرسایش خاک حوضه آبخیز مارون میباشد. بدینمنظور پساز رقومیکردن نقشههای حوضه به مقیاس1:50000 و تلفیق آنها باهمدیگر در محیط نرمافزار Arc GIS10.3 ، نقشه واحدهای کاری یا همگن تهیه گردید. سپس باتوجه به جداول امتیازدهی عوامل مورد استفاده در مدل و بازدیدهای میدانی با بهکارگیری GPS در عرصه و اعمال امتیازات عوامل در هر یک از واحدهای همگن در محیط GIS، امتیاز نهائی هر عامل و نیز نمرۀ شدت میزان فرسایش در واحدهای کاری برآورد گردید. درنهایت نقشه وزنی حاصل براساس جدول طبقهبندی کلاسهای فرسایشی مدل F.A.O و باتوجه به دامنه حداقل و حداکثر نمره ارزیابی شده برای عوامل در واحدهای کاری به چهار رده فرسایشی با وضعیتهای نسبتاً متوسط، متوسط، زیاد و خیلیزیاد طبقهبندی گردید. نتایج نشان میدهد 95 درصد از وسعت منطقه مورد بررسی در فرسایش متوسط (49/06 درصد) تا زیاد (45/98 درصد) و تنها 5 درصد مساحت منطقه در رده فرسایش نسبتاً متوسط (3/66 درصد) و خیلی زیاد (1/30 درصد) قرار میگیرد. پرونده مقاله -
دسترسی آزاد مقاله
45 - بررسی تاثیر کاربری اراضی و پوشش گیاهی بر اشکال فرسایش و میزان تولید رسوب (مطالعه موردی حوزه آبخیز رود ورس استان قزوین)
مهرداد اسفندیاری ابوالفضل معینی راحله مقدسیدر سال های اخیر، تاثیر متقابل تغییر کاربری اراضی و فرسایش خاک تبدیل به یک نگرانی عمده زیست محیطی شده و تاثیرات مهمی در فرسایش خاک و تولید رسوب داشته است. نتایج بدست آمده از مطالعات نشانگر این امر است که از بین عوامل موثر بر فرسایش آبی و تولید رسوب عامل استفاده از وضعیت چکیده کاملدر سال های اخیر، تاثیر متقابل تغییر کاربری اراضی و فرسایش خاک تبدیل به یک نگرانی عمده زیست محیطی شده و تاثیرات مهمی در فرسایش خاک و تولید رسوب داشته است. نتایج بدست آمده از مطالعات نشانگر این امر است که از بین عوامل موثر بر فرسایش آبی و تولید رسوب عامل استفاده از وضعیت زمین و پوشش گیاهی نقش اساسی در ایجاد اشکال مختلف فرسایش و مقدار رسوب تولید شده در حوزه آبخیز دارد. به این دلیل این تحقیق به منظور بررسی تعیین تاثیر کاربری اراضی و پوشش گیاهی بر اشکال فرسایش و مقدار تولید رسوب در حوزه آبخیز رود ورس در استان قزوین صورت گرفته است. در این تحقیق برای برآورد فرسایش و رسوب حوزه از مدل MPSIAC[1] استفاده شده، و با بهره گیری از سیستم اطلاعات جغرافیایی (GIS)[2] نقش کاربری ها درایجاد اشکال فرسایش و تولید رسوب مورد بررسی قرار گرفته است. نتایج نشان می دهد که کاربری های مختلف در منطقه مورد مطالعه نه تنها بر پیدایش اشکال مختلف فرسایش، بلکه بر شدت آنها و میزان تولید رسوب تاثیر گذار است. در این حوزه انواع فرسایش شیاری، خندقی، کناری و آبراهه ای به صورت متوسط تا شدید به چشم می خورد. میزان رسوب برآورد شده از مدل برای کل حوزه 7/1 تن در هکتار در سال و مقدار فرسایش ویژه در حوزه 04/7 تن در هکتار در سال برآورد گردیده است. کاربری زراعت دیم با 14/2 تن در هکتار در سال تولید رسوب بیشترین تاثیر را در ایجاد فرسایش و رسوب در بین کاربری های حوزه دارد. در کاربری مرتع تیپ 3 و زراعت دیم مقدار رسوب برآورد شده بسیار بالا است که نشان دهنده استفاده نادرست از اراضی حوزه باشد. مقدار رسوب تولید شده در کاربری مرتع تیپ 1 کمتر از باغ بوده که نشان دهنده تاثیر مثبت پوشش گیاهی مرتعی خوب در کاهش مقدار فرسایش و رسوب است. پرونده مقاله -
دسترسی آزاد مقاله
46 - ضرورت یادگیری الکترونیکی و نقش آن درتوسعه روستا (مطالعۀ موردی روستاهای استان قزوین)
عبدالرضا رحمانی فضلی سیما بوذریدرآغاز قرن 21 ، ارتباطات و فناوری اطلاعات از موضوعات استراتژیک ملی درسطح دولتها به شمار می رود . نقشعوامل فوق درتوسعه موجب گردیده است که کشورهای درحال توسعه، در سیاستگذاریها و برنام هریزی های ملی ودربرنامه های توسعه خود جایگاه ویژه ای را به این بخش اختصاص دهند. امروز ار چکیده کاملدرآغاز قرن 21 ، ارتباطات و فناوری اطلاعات از موضوعات استراتژیک ملی درسطح دولتها به شمار می رود . نقشعوامل فوق درتوسعه موجب گردیده است که کشورهای درحال توسعه، در سیاستگذاریها و برنام هریزی های ملی ودربرنامه های توسعه خود جایگاه ویژه ای را به این بخش اختصاص دهند. امروز ارتباطات، زیربنای ، زیربناها نام گرفتهاست، سرمایه گذاری دراین بخش افزایش یافته و کشورهای توسعه یافته با توسعه زیرساخت های ارتباطی،زمینه های اقتصاد،فرهنگ وسیاست جهانی رادرکنترل گرفته اند. امروز کشوری می تواند درعرصه های مختلف جهانی حضور فعال داشته باشدکه دارای زیرساخت های ارتباطی قوی باشد. توسعه ارتباطات به معنای توسعه درهمۀ بخشهای جامعه است . دراین میانروستاها به دلیل ویژگیهای طبیعی و محدودیتهای دسترسی به منابع و امکانات بیش از سایر بخش هامی توانند با بهره گیریازفناوریهای اطلاعاتی و ارتباطی درجهت توسعه گام بردارند. پرونده مقاله -
دسترسی آزاد مقاله
47 - پژوهش در تحول تکتونیکی و مرفولوژیکی تالاب قوری گل تبریز
علی بلادپسچاله بسته قوری گل از دیدگاه ژئومورفولوژی ساختمانی بخشی از منطقه تکتونیکی بستان آباد است . بامطالعه عکس های هوایی می توان منطقه بستان آباد را به صورت یک آنتی کلیناریوم شناخت که در اثر فازهایکوهزایی اواخر دوران سنوزوییک به وجود آمده است و دنباله چین خوردگی تشکیلات نئوژن ش چکیده کاملچاله بسته قوری گل از دیدگاه ژئومورفولوژی ساختمانی بخشی از منطقه تکتونیکی بستان آباد است . بامطالعه عکس های هوایی می توان منطقه بستان آباد را به صورت یک آنتی کلیناریوم شناخت که در اثر فازهایکوهزایی اواخر دوران سنوزوییک به وجود آمده است و دنباله چین خوردگی تشکیلات نئوژن شمال شرق تبریز است .تالاب قوری گل به مانند بخش های دیگر منطقه در اوایل کواترنر (احتمالاً پلیوستوسن) بر اثر حرکات نئوتکتونیکگسسته شده و حاصل آن پیدایش چندین گسل در امتداد شمال غرب جنوب شرق است که تشکیلات فلیشکرتاسه فوقانی را جا به جا کرده و منجر به پیدایش فوسه تکتونیکی قوری گل شده است در کنار تالاب دو گسلبه موازات هم شناخته می شود. گسل اول تقریباً در شمال شرق و گسل دوم از جنوب شرق آن می گذرد که حد وسطاین دو گسل تالاب شکل گرفته است. پرونده مقاله -
دسترسی آزاد مقاله
48 - Undesirable factors in stochastic cross-efficiency evaluation
Mehdi Khodadadipour Abdollah Hadi-Vencheh Mohhamad Reza Behzadi Mohsen Rostamy-MalkhalifehCross-efficiency evaluation in Data envelopment analysis (DEA) has been accepted as a useful tool for performance evaluation and ranking of decision making units. In this paper using Undesirable Multiple Form (UMF) model with specific risk of α, a new stochastic m چکیده کاملCross-efficiency evaluation in Data envelopment analysis (DEA) has been accepted as a useful tool for performance evaluation and ranking of decision making units. In this paper using Undesirable Multiple Form (UMF) model with specific risk of α, a new stochastic model called Expected Ranking Criterion is introduced using statistical techniques for efficiency evaluation decision making units (DMU). Another issue in applying cross-efficiency DEA models is considering stochastic in input and output variables. Also, the non-uniqueness of optimal weights in this evaluation has reduced the usefulness of this powerful method. As a result, it is recommended that secondary goals be introduced in cross-efficiency evaluation. In this paper, the cross-efficiency model is modified to deal with stochastic data by applying chance-constrained approach. پرونده مقاله -
دسترسی آزاد مقاله
49 - رابطه سازندهای زمین شناسی و شکل اراضی با تشکیل و تحول خاک (مطالعه موردی بخش جنوبی دشت ارومیه)
هنگامه جوادى رضا سکوتی اسکویی ابراهیم پذیرااین پژوهش، با هدف مطالعه تأثیر شکل اراضی و سازندهای زمین شناسی برروی برخی ویژگیهای فیزیکی- شیمیایی خاکها به منظور شناسایی بهتر و کاملتر خاکها در جهت مدیریت بهینه اراضی و پیشبرد کشاورزی پایداردر بخش جنوبی دشت ارومیه به مساحت 17000 هکتار در استان آذربایجانغربی انجام گ چکیده کاملاین پژوهش، با هدف مطالعه تأثیر شکل اراضی و سازندهای زمین شناسی برروی برخی ویژگیهای فیزیکی- شیمیایی خاکها به منظور شناسایی بهتر و کاملتر خاکها در جهت مدیریت بهینه اراضی و پیشبرد کشاورزی پایداردر بخش جنوبی دشت ارومیه به مساحت 17000 هکتار در استان آذربایجانغربی انجام گرفت. در این پژوهش برای شناسایی و تفکیک اشکال مختلف اراضی از عکسهای هوایی، نقشه های توپوگرافی و زمین شناسی استفاده گردید. تفکیک و جداسازی سری های خاک بر اساس فرآیندهای ژئومورفولوژی و خاکسازی انجام شد. تعداد 30 پروفیل خاک به ابعاد استاندارد حفر و تشریح گردید. تعداد پنج خاکرخ شاهد انتخاب و پس از نمونه برداری هر افق ژنتیکی، به آزمایشگاه منتقل شد. رژیم رطوبتی خاک xeric و رژیم حرارتی mesic تعیین شده است. ردهبندی خاکهای منطقه جز Inceptisol ها و زیر گروه بزرگ غالب Fluventic میباشد. بیشتر سازندها و سنگهای واقع در حوضه آبریز رودخانههای باراندوز و قاسملو سنگها و تشکیلات آهکی بوده و آهک یکی از فاکتورهای تعیین کننده سنگ مادر در تشکیل خاکهای مختلف منطقه بوده است. از طرفی فیزیوگرافی و توپوگرافی نیز نقش مهم و تعیین کنندهای داشتهاند، بطوریکه تراسهای فوقانی دارای خاک تکامل یافتهتر بوده و مناطق با شیب ملایمتر و قدمت کمتر خاکهای با تکامل کمتری را شامل میشوند. با کاهش ارتفاع و نزدیکی به دریاچه ارومیه تأثیر سطح آب زیرزمینی و شوری آن بر پروفیلها مشهود و مشخص است. در این میان حاشیه رودخانه و آبراههها به دلیل رسوبگذاریهای عصر حاضر دارای خاکهای جوان و تکامل نیافته هستند. پرونده مقاله -
دسترسی آزاد مقاله
50 - مدلسازی بار رسوب کل رودخانهها با استفاده از شبکههای عصبی مصنوعی
امین فلامکی مهناز اسکندری عبدالحسین بغلانی سید احمد احمدیبرآورد بار رسوب کل رودخانه ها از مسائل مهم و کاربردی در مدیریت و برنامه ریزی منابع آب است. غلظت رسوب می تواند به روش های مستقیم و یا غیرمستقیم محاسبه شود که معمولاً روش های مستقیم پرهزینه و زمان بر هستند. همچنین بار رسوب کل می تواند به کمک روابط مختلف انتقال رسوب محاسبه چکیده کاملبرآورد بار رسوب کل رودخانه ها از مسائل مهم و کاربردی در مدیریت و برنامه ریزی منابع آب است. غلظت رسوب می تواند به روش های مستقیم و یا غیرمستقیم محاسبه شود که معمولاً روش های مستقیم پرهزینه و زمان بر هستند. همچنین بار رسوب کل می تواند به کمک روابط مختلف انتقال رسوب محاسبه شود، لیکن به طور معمول کاربرد این روابط نیاز به شرایط معینی داشته و به علاوه در بیشتر موارد نتایج حاصل از آن ها با یکدیگر و با مقادیر اندازه گیری شده متفاوت است. هدف از این پژوهش ارائه روشی بر پایه شبکه های عصبی مصنوعی (ANN) در تخمین بار رسوب کل بود. بدین منظور از دو نوع شبکه عصبی پرسپترون چند لایه (MLP) و توابع پایه شعاعی (RBF) و 200 نمونه، استفاده شد. 75 درصد از داده ها برای آموزش و 25 درصد برای آزمون شبکه ها در نظر گرفته شدند. متغیرهای ورودی مدل ها شامل سرعت متوسط جریان، شیب کف آبراهه، عمق متوسط، عرض آبراهه و قطر میانه ذرات رسوب و خروجی مدل، غلظت رسوب بود. متغیرهای ورودی مرحله به مرحله به شبکه ها اضافه شدند و هر بار نتایج ارزیابی شد تا مناسب ترین مدل تعیین شود. سپس نتایج حاصل از مدل های ANN با پنج معادله معروف انتقال رسوب مقایسه شدند. شاخص‌های آماری نشان داد که دقت شبکه های عصبی به ویژه مدل MLP در تخمین بار رسوب کل با ضریب همبستگی 96/0 بیش از سایر مدل هاست. همچنین مشخص شد که برای افزایش دقت مدل نیاز به آموزش آن با هر دو نوع داده های هیدرولوژیک و رسوب است. رابطه Ackersو White در برآورد مقدار بار رسوب کل بسیار بیش برآورد و سایر روابط، کم برآورد بودند. نتایج این پژوهش نشان داد که مدل های ارائه شده بر پایه شبکه های عصبی با مقادیر رسوب کل مشاهده شده هم خوانی بیشتری دارند و بویژه شبکه MLP می تواند مقدار رسوب را در نقاط پیک به خوبی برآورد نماید. پرونده مقاله -
دسترسی آزاد مقاله
51 - تغییرات شکلهای شیمیایی و قابل استفاده آهن در خاکهای تیمار شده توسط سرباره و لجن کنورتور کارخانه ذوب آهن اصفهان
علیرضا کاظمی حسین شریعتمداری محمود کلباسیاز میان عناصر مورد نیاز گیاهان کمبود آهن به عنوان عنصر کم مصرف بیشترین محدودیت را برای محصولات کشاورزی سرتا سر جهان دارد. متخصصین امروزه برای حل مشکل کمبود آهن در گیاهان از روشهای بسیار پر هزینه از قبیل کاربرد نمکها وکلاتهای آهن، تعدیل مصنوعی پ- هاش خاک و جایگزینی گونه& چکیده کاملاز میان عناصر مورد نیاز گیاهان کمبود آهن به عنوان عنصر کم مصرف بیشترین محدودیت را برای محصولات کشاورزی سرتا سر جهان دارد. متخصصین امروزه برای حل مشکل کمبود آهن در گیاهان از روشهای بسیار پر هزینه از قبیل کاربرد نمکها وکلاتهای آهن، تعدیل مصنوعی پ- هاش خاک و جایگزینی گونه‌های گیاهی که توانایی زیاد برای جذب آهن دارند، استفاده نموده اند. استفاده ازمواد جامد زاید کارخانجات فولادسازی و ذوب آهن مانند سرباره و لجن کنورتور به عنوان مواد اصلاحی خاک در تغذیه آهن می‌توانند مفید باشند. این ترکیبات حاوی درصد قابل توجهی آهن هستند و سالانه به مقدار خیلی زیاد تولید و انباشته می‌شوند. قابلیت دسترسی زیستی و تحرک عناصر وابسته به شکلهای شیمیایی آنها درخاک است. این تحقیق با هدف مطالعه اثر کاربرد سه ساله لجن کنورتور و سرباره کار خانه ذوب آهن اصفهان بر 1) مقدار آهن قابل جذب، 2) شکلهای شیمیایی آهن و 3) چگونگی توزیع این شکلها در خاک سطحی و عمقی سه خاک آهکی در قالب طرح اسپلیت پلات با طرح پایه بلوکهای کامل تصادفی با سه تیمار، در سه تکرار و در دوعمق طی سه سال متوالی اجرا شد. برای تعیین شکلهای شیمیایی آهن از روش Shuman و Tessier استفاده شد. بر طبق این روش نمونه خاک بطور متوالی با آب مقطر دوبار دیونیزه شده برای استخراج فرم محلول، کلرید منیزیم برای استخراج فرم تبادلی، هیپو کلریت سدیم برای استخراج آهن متصل به مواد آلی، بافر استات سدیم - استیک اسید برای استخراج آهن کربناته، هیدروکسیل آمین - هیدروکلراید برای استخراج آهن متصل به اکسیدهای کریستالی منگنز، بافر اگزالات آمونیوم - اسید اگزالیک برای استخراج آهن غیر کریستالی، هیدروکسیل آمین - هیدروکلراید برای استخراج آهن متصل به هیدروکسیدهای آهن، سیترات - بیکربنات - دیتیونات سدیم برای استخراج آهن آزاد یا پدوژنیک و هیدروکلریک نیتریک- هیدرو فلوئوریک اسید برای استخراج فرم باقی مانده آهن، عصاره‌گیری شد. در پایان هر مرحله غلظت آهن توسط دستگاه جذب اتمی تعیین شد. برای تعیین آهن قابل جذب گیاه از عصاره‌گیر) (DTPA-TEAاستفاده شد. کاربرد سرباره و لجن کنورتور برای یک، دو و سه سال متوالی سبب شد بیش از % 99 آهن در فرمهای باقی مانده، متصل به اکسیدها و هیدروکسیدهای آهن، بی شکل، آزاد و کمتر از % 1 آهن در سایر فرمهای شیمیایی قرار گیرد. ترتیب مقادیر شکلهای شیمیایی آهن در خاک سطحی و عمقی مزرعه خزانه به صورت: آهن باقی مانده > آهن متصل به اکسیدها و هیدروکسیدهای آهن > آهن آزاد > آهن بی شکل > آهن متصل به اکسیدهای کریستالی منگنز > آهن محلول > آهن متصل به مواد آلی > آهن تبادلی > آهن کربناته است. ترتیب مقادیر شکلهای شیمیایی آهن در خاک سطحی و عمقی مزرعه‌های لورک و شرودان شبیه مزرعه خزانه است با این تفاوت که مقدار آهن کربناته بیشتر از آهن تبادلی است. نتایج نشان داد کاربرد سرباره و لجن کنورتور طی سه سال متوالی باعث افزایش معنی دار شکلهای شیمیایی آهن و آهن قابل جذب در خاک هر سه مزرعه شد. پرونده مقاله -
دسترسی آزاد مقاله
52 - فورمولاسیون و بررسی ویژگیهای رئولوژیکی فورمولای انترال پلی مریک حاوی پروتئین کازئینات سدیم
هیلدا مقدم کیا افشین جوادی علی طریقت اسفنجانی اکرم پزشکی نجف آبادیمقدمه: انسداد سوند، اسهال و ریفلاکس بسته به نوع فورمولای مورد استفاده، از مشکلات معمول تغذیه انترال در بیماران است. اهداف این مطالعه طراحی فورمولای انترال مناسب، بررسی و مقایسه ویژگیهای رئولوژیک آن با نوعی از فورمولای تجاری موجود تعیین شده بود. مواد وروشها: دراین م چکیده کاملمقدمه: انسداد سوند، اسهال و ریفلاکس بسته به نوع فورمولای مورد استفاده، از مشکلات معمول تغذیه انترال در بیماران است. اهداف این مطالعه طراحی فورمولای انترال مناسب، بررسی و مقایسه ویژگیهای رئولوژیک آن با نوعی از فورمولای تجاری موجود تعیین شده بود. مواد وروشها: دراین مطالعه کاربردی فورمولای انترال از مواد غذایی موجود و طبیعی با چگالی انرژیkcal/mL 1، تهیه شد. سپس ویژگیهای رئولوژیکی پایا و نوسانی آن و فورمولای آماده هر کدام در سه تکرار با استفاده از دستگاه رئومتر Physica Anton Paar مدل MCR 301 اندازه گیری شدند. اطلاعات بدست آمده با استفاده از نرم افزار MATLAB به منظور تعیین مدل ریاضی مناسب مورد برازش قرار گرفت. تحلیل داده ها به روش آزمون آنالیز واریانس یک طرفه (ANOVA) و آزمون مقایسه میانگین های دانکن در سطح 5% با نرم افزار آماری SPSS مورد تجزیه تحلیل قرار گرفت. یافتهها: نتایج نشان دادند که در فورمولای تهیه شده با استفاده از کازئینات سدیم و پوره مرغ ویسکوزیته وابسته به سرعت برشی بود و با افزایش سرعت برشی، ویسکوزیته فورمولا کاهش یافت در حالی که در فورمولای آماده مستقل از سرعت برشی بود. اختلاف معنیدار بین ویسکوزیته دو نوع فورمولا مشاهد نشد. ضریب تبیین R2 مدل هرشل بالکلی برای هر دو فورمولا، بالای 98% و بهترین مدل برای توصیف خصوصیات جریانی فورمولاها مدل هرشل بالکلی بود. مقادیر مدولهای ویسکوالاستیک فورمولای طراحی شده بیشتر از نمونه فورمولای تجاری بود. نتیجهگیری: با تغییر نوع پروتئین فورمولا (استفاده از مخلوط کازئینات سدیم و پوره مرغ) ویژگیهای رئولوژیکی آن در مقایسه با فرمولای آماده (حاوی مخلوط کازئینات سدیم و ایزوله سویا ) تغییر یافته و با توجه به ارزش تغذیهای بالا و خصوصیات رئولوژیکی مناسب فورمولای تهیه شده، میتوان استفاده از آن را در حمایت تغذیهای بیماران بستری نیازمند تغذیه انترال لولهای توصیه کرد. پرونده مقاله -
دسترسی آزاد مقاله
53 - ارزیابی آلودگی فلزات سنگین در رخسارههای شیمیایی سازند گچساران در ناحیه گیلانغرب، باختر کرمانشاه
بهنام سخاوتی مصطفی یوسفی راد محمودرضا مجیدی فرد علی سلگی زهرا ملکیزمینه و هدف: تعیین میزان پراکندگی فلزات سنگین در واحد های سنگی و بررسی آلودگی های ناشی از آن ها، از مباحث ضروری زیست محیطی است که آگاهی و شناخت آن ها، در مدیریت و کنترل آلاینده ها اهمیت فراونی داشته و از اهداف اصلی این پژوهش است. روش بررسی: جهت تعیین غلظت فلزات سنگین ا چکیده کاملزمینه و هدف: تعیین میزان پراکندگی فلزات سنگین در واحد های سنگی و بررسی آلودگی های ناشی از آن ها، از مباحث ضروری زیست محیطی است که آگاهی و شناخت آن ها، در مدیریت و کنترل آلاینده ها اهمیت فراونی داشته و از اهداف اصلی این پژوهش است. روش بررسی: جهت تعیین غلظت فلزات سنگین از تکنیک XRFوICP-mass بهره گرفته و با استفاده از نرم افزار های آماری و شاخص های آلودگی، به بررسی میزان آلایندگی این فلزات در تاریخ ۲۰ اسفند ماه سال ۹۶ بر روی رخساره های شیمیایی سازند گچساران در نواحی باختری استان کرمانشاه، پرداخته شد. یافته ها: یافته ها حاکی از میزان بالای غلظت کادمیوم در رسوبات سازند گچساران با میانگین غلظت (۳/۳) ppm بود که بالاتر از (3/0)ppm غلظت آن در پوسته می باشد. هر سه شاخص مورد استفاده (شاخص زمین انباشتگی، فاکتور غنی شدگی، ضریب آلودگی و ضریب بار آلودگی) آلودگی کادمیوم در رسوبات مورد مطالعه را نشان دادند اما فلزات مولبیدن، آلومینیوم، کبالت و آهن، آلودگی را در رسوبات نشان ندادند. همچنین مقادیر دو شاخصCF و EF روند مشابهی را در مورد وضعیت عناصر آلاینده، در رسوبات نشان دادند. بحث و نتیجه گیری: وجود مقادیر قابل توجه عنصر کادمیوم درتوالی های سازند گچساران، می تواند تحت تاثیر فرایند انحلال سنگ ها و رسوبات توسط آب های سطحی و زیرزمینی، همچنین فعالیت های بیولوژیکی (کشاورزی و معدن کاری) بیشتر شده و اثرات نامطلوب زیست محیطی بر جای گذارد. لذا پیش بینی و انجام تمهیدات لازم در این خصوص، ضروری به نظر می رسد. پرونده مقاله -
دسترسی آزاد مقاله
54 - کاهش تأثیرات جزایر حرارتی شهری بر سلامت انسانها از طریق تغییرات فرم شهری در اقلیم گرم و خشک شهر مشهد (نمونه موردی الگوی بافت شطرنجی محله شاهد و بافت ارگانیک محله پاچنار)
الهام ثناگر دربانی مجتبی رفیعیان تکتم حنایی دانیال منصفی پراپریزمینه و هدف: افزایش موج گرما در شهرها سبب گردیده تا مشکلات عدیدهای برای سلامت انسانها به وجود آید. کاهش مشکلات زیستمحیطی از طریق تقلیل دمای محیط و درنتیجه ارتقا سلامت انسانها از مهمترین دغدغهها در عصر حاضر است که میتوان بهوسیله تغییرات فرمهای شهری و عناصر محیطی چکیده کاملزمینه و هدف: افزایش موج گرما در شهرها سبب گردیده تا مشکلات عدیدهای برای سلامت انسانها به وجود آید. کاهش مشکلات زیستمحیطی از طریق تقلیل دمای محیط و درنتیجه ارتقا سلامت انسانها از مهمترین دغدغهها در عصر حاضر است که میتوان بهوسیله تغییرات فرمهای شهری و عناصر محیطی به آن دستیافت. روش بررسی: در این پژوهش از روش شبیهسازی مجموعه نرمافزار Envi-Met و Leonardo استفادهشده است. یافتهها: یافتهها حاکی از آن است که هرچقدر نسبت ارتفاع به عرض بیشتر شود، دسترسی نور خورشید به محیط کمتر میشود و درنتیجه دمای محیط کاهش مییابد. همچنین سایهاندازی ناشی از نسبت (H/w)، وجود گیاهان و باد در درههای شهری میتواند دمای محیط را کاهش دهد. علاوه بر آن کاهش سطوح نفوذناپذیر پوششهای شهری و وجود مصالح با آلبدوی بالا، باعث افزایش در تبخیر و تعرق میشود که شرایط خنکتر شدن محیطهای شهری را مهیا میکند و سبب کاهش تأثیرات نامطلوب گرمای شهری بر سلامت انسان میشود. بحث و نتیجهگیری: میتوان نتیجه گرفت که ایجاد سایهاندازی از طریق ترکیب پوشش گیاهی و همچنین ایجاد تغییرات متنوع در ساختارهای ارتفاع به عرض (H/w) که هم سایهاندازی را افزایش دهد و هم در بخشهایی راه را برای انتشار گرمای محیط بازنماید، میتواند در کاهش دمای محیط و سطوح، تأثیرگذار باشد. همچنین استفاده از سطوح شهری نفوذپذیر و انتخاب مصالح جدارههای ساختمانها با بازتابش کم در جذب کمتر نور خورشید تأثیرگذار است و میتواند شدت جزایر حرارتی شهری را کاهش دهد. پرونده مقاله -
دسترسی آزاد مقاله
55 - ارزیابی اثرات رواناب بر فرسایش حوضه آبریز خدیجه خاتون با استفاده از مدل MPSIAC
حمیدرضا پازوکی مهدی سرائی تبریزی حسین بابازادهزمینه و هدف: در دهه اخیر، در اثر تغییر کاربری اراضی و تخریب پوشش گیاهی، قسمت اعظم نزولات تبدیل به رواناب شده و با ایجاد سیلابهایی عظیم، باعث خسارات مالی و جانی فراوان میگردد. هدف از این پژوهش، ارزیابی تأثیر رواناب بر فرسایش حوضه آبریز با استفاده از مدل MPSIAC بوده است چکیده کاملزمینه و هدف: در دهه اخیر، در اثر تغییر کاربری اراضی و تخریب پوشش گیاهی، قسمت اعظم نزولات تبدیل به رواناب شده و با ایجاد سیلابهایی عظیم، باعث خسارات مالی و جانی فراوان میگردد. هدف از این پژوهش، ارزیابی تأثیر رواناب بر فرسایش حوضه آبریز با استفاده از مدل MPSIAC بوده است.روش بررسی: بدین منظور، نخست نقشههای پایه حوضه خدیجه خاتون در سال 1397 نظیر نقشههای توپوگرافی و زمینشناسی جمعآوری شد. سپس مراحل محاسبه 9 فاکتور مدل شامل زمین شناسی، خاک، آب و هوا، رواناب، پستی و بلندی، پوشش زمین، استفاده از زمین، وضعیت فعلی فرسایش و فرسایش رودخانهای انجام و فرسایش و رسوب منطقه برآورد و در نهایت، رابطه رواناب و فرسایش حوضه بررسی و مدل برآورد فرسایش و رسوب از روی رواناب تعیین گردید.یافته ها: نتایج این پژوهش نشان داد که میزان فرسایش خاک، 97/5806 تن در سال برابر 58/3 تن در هکتار در سال میباشد. چنانچه ارزش هر تن خاک زراعی معادل 50 دلار در نظر گرفته شود و در صورت مهیا بودن شرایط فرسایش، ارزش 97/5806 تن در سال معادل 5/290348 دلار و به عبارتی 9/11613 میلیون ریال میباشد. در کل حوضه مورد مطالعه، فاکتور هفتم و هشتم مدل MPSIAC از مؤثرترین عوامل در بروز فرسایش هستند.بحث و نتیجهگیری: نتایج بیانگر این موضوع است که مراتع اطراف حوضه خدیجه خاتون بهعلت استفاده بیش از ظرفیت، تخریب شده و مراتع کل منطقه بهعلت شرایط اقلیمی در وضعیت خوبی نیست. همچنین نتایج نشان داد که فاکتور رواناب دارای همبستگی 98/0 خطی با فرسایش میباشد و بیانگر این است که هر چه رواناب زیادتر شود، میزان فرسایش و رسوبدهی نیز افزایش مییابد. پرونده مقاله -
دسترسی آزاد مقاله
56 - تببین شرایط آسایش اقلیمی در الگوهای فضایی – کالبدی بافت محلات سنتی (مطالعه موردی: محلات سنتی شهر همدان)
محمد معتقد حسن سجادزادهزمینه و هدف: گسترش شهرها طی دهه های اخیر، موجب افت میزان آسایش اقلیمی در آنها شده است. یکی از اهداف این پژوهش تحلیل هندسه فضایی و الگوهای ساختاری فضایی محلات سنتی اقلیم سرد و خشک در راستای بهره گیری از این الگو در توسعه بافت های مسکونی جدید و همچنین بررسی نقش و الگوی ک چکیده کاملزمینه و هدف: گسترش شهرها طی دهه های اخیر، موجب افت میزان آسایش اقلیمی در آنها شده است. یکی از اهداف این پژوهش تحلیل هندسه فضایی و الگوهای ساختاری فضایی محلات سنتی اقلیم سرد و خشک در راستای بهره گیری از این الگو در توسعه بافت های مسکونی جدید و همچنین بررسی نقش و الگوی کاشت و گونه های فضاهای سبز در محلات گذشته می باشد.روش بررسی: در ابتدا مولفه های موثر بر آسایش اقلیمی با مطالعه و بررسی دیدگاه صاحب نظران به دست آمده است. برای تجزیه وتحلیل داده ها از روش شبیه سازی و نرم افزار Ecotect Autodesk در سه محله سنتی شهر همدان مورد تحقیق قرار گرفت. تحلیل ها در ساعات صبح و عصر روزهای 1 تیر و 1 دی ماه سال 98 ، انجام شده است.یافته ها: الگوی محله های مرکزگرا نسبت به محله های خطی در فصول سرد سال از شرایط بهره گیری بیشتر از آفتاب در ساعات صبح و عصر برخوردار است ، اما در الگوی محلات خطی در فصول سرد باید تمهیدات بیشتر را برای بهره گیری از میزان نور خورشید به کار گرفت. با توجه به آن که میزان سایه اندازی در الگوی محلات خطی در فصل سرما به میزان بیشتری از محله های مرکزگرا می باشد ، برای ایجاد شرایط آسایش اقلیمی نیازمند تمهیدات ویژه ای هستند.بحث و نتیجه گیری: استفاده از الگوهای مرکز گرا در ایجاد محلات می تواند باعث بالا رفتن میزان آسایش اقلیمی در محلات گردد. همچنین با توجه به نوع اقلیم سرد و خشک محلات یاد شده، وجود درختان کهنسال در مراکز محله ضمن فراهم کردن موجبات عدم نفوذ بادهای سرد غالب در محیط پیرامون، بستری برای ایجاد خنکی و آسایش اقلیمی به خصوص در فصول گرم در این مناطق شده است. پرونده مقاله -
دسترسی آزاد مقاله
57 - محیط رسوبی و چینه نگاری سکانسی سازند جهرم با نگرش بر بوم شناسی دیرینه در فارس داخلی، زاگرس ( جنوب غرب ایران)
سیده سمانه یزدان پناه وحید احمدی مهران آرین زهرا ملکیزمینه و هدف: سازند جهرم به دلیل وسعت زیاد، تفاوت زیست چینه ای و سنگ چینه ای در مقاطع مختلف و وجود ذخایر هیدروکربنی، از دیرباز مورد توجه خاصی بوده است. هدف از این پژوهش، بررسی سازند جهرم در مناطق مورد مطالعه، از لحاظ موقعیت چینه شناسی (ضخامت و لیتولوژی)و زمین شناسی(همبری چکیده کاملزمینه و هدف: سازند جهرم به دلیل وسعت زیاد، تفاوت زیست چینه ای و سنگ چینه ای در مقاطع مختلف و وجود ذخایر هیدروکربنی، از دیرباز مورد توجه خاصی بوده است. هدف از این پژوهش، بررسی سازند جهرم در مناطق مورد مطالعه، از لحاظ موقعیت چینه شناسی (ضخامت و لیتولوژی)و زمین شناسی(همبری با سازند های بالایی و پایینی) و بوم شناسی دیرینه آن است. روش بررسی: در این تحقیق سه برش چینه شناسی مربوط به سازند جهرم (رسوبات ائوسن زیرین تا ائوسن میانی) در ناحیه فارس داخلی زاگرس انتخاب و نمونه برداری انجام گرفت. که تحت عناوین برش های گوشه نکان،کوه چهل چشمه و تنگ گرم نام گذاری و معرفی گردید. در مجموع پس از عملیات های صحرایی طی دو سال اخیر، بررسی های سنگ چینه نگاری و نمونه برداری تعداد 465 عدد مقطع نازک میکروسکپی تهیه و میکروفسیل های در برگیرنده آنها به دقت مطالعه وبررسی گردید، و در نتیجه ریز رخساره ها و محیط های رسوبی در برگیرنده آنها شناسایی و معرفی گردید . یافته ها: با توجه به مطالعات سنگ چینه ای، زیست چینه ای و مطالعات میکروفاسیس و همچنین با توجه به اصول و قوانین چینه نگاری سکانسی دو سکانس رسوبی برای رسوبات مورد مطالعه شناسایی و معرفی گردید. همچنین در این تحقیق آشکار شد که، شناسایی مرز زیرین سازند جهرم در برش های مورد مطالعه که با سازند ساچون بصورت همساز و مرز بالایی آن با سازند آسماری بصورت ناپیوستگی فرسایشی قابل مشاهده می باشد. بحث و نتیجه گیری: سازند جهرم بر اساس این تحقیق در یک رمپ داخلی نهشته شده است و متشکل از دو سکانس می باشد. محیطهای رسوبی شناسایی شده و بررسی آنالیزهای ژئوشیمیایی بوم شناسی دیرینه سازند جهرم در برشهای مورد مطالعه نیز مورد بررسی قرار گرفت. همچنین جایگاه زمین ساختی حوضه رسوبی سازند جهرم در مقایسه با حوضه های مجاور در قالب یک طرح مفهومی برای نخستین بار، ارائه شد. پرونده مقاله -
دسترسی آزاد مقاله
58 - ارزیابی نقش دولت در چالش های زیست محیطی ایران ( رویکرد اقتصاد محیط زیست )
نیلوفر مرادحاصل امیرحسین مزینیفرایند توسعه اقتصادی کشورها طی دهه های اخیر به گونه ای بوده که چالش های زیست محیـطی به یکی از مهم ترین دغدغه های سیاست گذاران تبدیل شده است. مواجهه با این موضوع در گام اول مستلزم شناسایی منابع عمده ایجاد آلودگی است. این موضوع با تاکید بر نقش دولت (در مقایسه با بخش خصوصی چکیده کاملفرایند توسعه اقتصادی کشورها طی دهه های اخیر به گونه ای بوده که چالش های زیست محیـطی به یکی از مهم ترین دغدغه های سیاست گذاران تبدیل شده است. مواجهه با این موضوع در گام اول مستلزم شناسایی منابع عمده ایجاد آلودگی است. این موضوع با تاکید بر نقش دولت (در مقایسه با بخش خصوصی) موضوع تحقیق حاضر می باشد. چراکه اصولاً بنگاه های اقتصادی دولتی نیز می تواند به موازات بخش خصوصی به عنوان یک منبع ایجاد آلودگی شناخته شود. این وضعیت در اغلب کشورهای کمتر توسعه یافته و در حال توسعه، که دولت ها حجم قابل توجهی از تصدی گری فعالیت های اقتصادی را در اختیار دارند، مشاهده می شود. این بحث از این حیث قابل تامل می باشد که دولت ها از یک سو، منشاء ایجاد آلودگی می باشند و از سوی دیگر بنا به وظایف حاکمیتی خود مسئولیت حفاطت از محیط زیست را بر عهده دارند. مطالعه حاضر حکایت از آن دارد که ایران نیز از این مقوله مستثنی نیست. چرا که سهم بالای دولت در اقتصاد کشور، جدای از تبعات نامطلوب اقتصادی، چالش های زیست محیطی قابل توجهی را ایجاد نموده است. در مقاله حاضر پس از بیان وضعیت آلاینده ها در ایران، با توجه به جریان تولید و انتشار آلودگی طی سال های اخیر به بررسی سهم نسبی بنگاه های دولتی در تولید آلودگی پرداخته شده است. نتایج حکایت از آن دارد که سهم دولت در تولید آلودگی بسیار قابل توجه است. این نتیجه با بررسی عملکرد بخش های مختلف اقتصادی شامل : صنعت، کشاورزی ، تجاری و عمومی، حمل ونقل و نیروگاه ها در قالب رویکرد توصیفی و نیز بررسی ارتباط میان حجم آلودگی و تشکیل سرمایه در بخش خصوصی و دولتی با کمک روش های اقتصاد سنجی، به دست آمده است. در ادامه مقاله ضمن پرداختن به تجربه سایر کشورها، استدلال شده است دولت ایران که در شرایط حاضر متولی سیاست گذاری و حفاظت از محیط زیست می باشد (و خود نقش قابل توجهی در تولید آلودگی نیز دارد) زمانی خواهد توانست در راستای ایفای نقش خود در فرآیند توسعه پایدار گام بردارد که ابتدا به اصلاح و مهندسی مجدد ساختار اقتصادی و جایگاه خود بپردازد. پرونده مقاله -
دسترسی آزاد مقاله
59 - اثر پتانسیل اکسیداسیون و احیا درتغییر فازهای پیوندی فلزات سنگین در رسوبات بستر تالاب بین المللی انزلی
محسن سعیدی محمد فخاریزمینه و هدف: فلزات سنگین موجود در رسوبات دارای پیوندهای متفاوتی با اجزای مختلف رسوب هستند. عوامل متعددی باعث تغییر در فازهای پیوندی فلزات موجود در رسوب می گردند که یکی از آن ها تغییر پتانسیل اکسیداسیون و احیا (شرایط رداکس) در رسوبات است. یکی از عواملی که باعث تغییر پتان چکیده کاملزمینه و هدف: فلزات سنگین موجود در رسوبات دارای پیوندهای متفاوتی با اجزای مختلف رسوب هستند. عوامل متعددی باعث تغییر در فازهای پیوندی فلزات موجود در رسوب می گردند که یکی از آن ها تغییر پتانسیل اکسیداسیون و احیا (شرایط رداکس) در رسوبات است. یکی از عواملی که باعث تغییر پتانسیل رداکس در محیط رسوبات می گردد، تغییر شرایط رسوبات از بی هوازی به هوازیست. روش بررسی: در این تحقیق میزان تاثیر تغییر پارامتر پتانسیل اکسیداسیون و احیا در تغییر فازهای پیوندی فلزات موجود در رسوبات بستر تالاب بین المللی انزلی مورد بررسی قرار گرفت. یافته ها: برای تغییر شرایط رداکس، نمونه رسوبات به دست آمده از تالاب انزلی، طی مدت یک ماه در معرض هوادهی قرار گرفت و در زمان های 0، 1، 7، 21 و 28 روز میزان Eh و pH اندازه گیری شد. در زمان های یاد شده از رسوبات نمونه برداری گردید و میزان فلزات سنگین Cu، Zn، Ni و Cr در فازهای پیوندی مختلف با استفاده از آزمایشات استخراج متوالی تعیین شد. بحث و نتیجه گیری: با توجه به نتایج به دست آمده، بیش ترین میزان فلز مس در پیوند با مواد آلی و سولفیدی و عمده فلز روی در پیوند با اکسید های آهن و منگنز بود. در حالی که فلزات کرم و نیکل بیش تر در فاز سخت و باقی مانده حضور داشتند. همین طور با ادامه روند هوادهی، 8 تا 23 درصد از فلزات موجود از رسوبات آزاد و وارد فاز محلول شدند. این آزاد سازی عمدتاً از فاز پیوندی با مواد آلی و سولفیدی صورت گرفت. پرونده مقاله -
دسترسی آزاد مقاله
60 - بررسی برخی ویژگیهای کیفی و غلظت عناصر سنگین در لجن فاضلاب خشک شده تصفیهخانه شاهینشهر اصفهان
حمیدرضا رحمانی مسعود معیری زهره مظاهری کوهانستانی نرجس خدابخش حسین شریفیزمینه و هدف: استفاده از لجن فاضلاب در زمین یکی از مهم ترین روش های دفع لجن می باشد که باعث استفاده بهینه مواد غذایی موجود در لجن میشود. اما وجود آلاینده ها و ارگانیسمهای پاتوژن در آن برای سلامت عمومی خطرناک است که بایستی پیش از استفاده مورد ارزیابی قرار بگیرد. ا چکیده کاملزمینه و هدف: استفاده از لجن فاضلاب در زمین یکی از مهم ترین روش های دفع لجن می باشد که باعث استفاده بهینه مواد غذایی موجود در لجن میشود. اما وجود آلاینده ها و ارگانیسمهای پاتوژن در آن برای سلامت عمومی خطرناک است که بایستی پیش از استفاده مورد ارزیابی قرار بگیرد. این تحقیق، با هدف بررسی کیفیت لجن خشک شده تصفیهخانه فاضلاب شاهینشهر از نظر غلظت عناصر سنگین انجام گرفت. روش بررسی: نمونهبرداری از لجن خشک تصفیهخانه فاضلاب شاهینشهر (با سه تکرار) به صورت فصلی در سال 92-1391 انجام و غلظت برخی فلزات سنگین در کنار پارامترهای شیمیایی و میکروبی لجن با استفاده از روش های DTPA، جذب اتمی و روش معمول اندازهگیری شد. نتایج با استفاده از آزمون t با حدود استاندارد مقایسه و تغییرات فصلی با استفاده از آنالیز واریانس یک طرفه و آزمون دانکن برای مقایسه میانگینها بررسی شد. یافته ها: مقادیر کلیفرم مدفوعی و کل در هیچ گروهی از استانداردها واقع نشده و استفاده مجدد با شرایط فعلی از نظر بهداشتی محدودیت دارد. مقادیر pH، جامدات کل، مواد آلی و رطوبت در دامنه مقادیر معمول قرار داشت. تغییرات فصلی ترکیب لجن نشان داد، بهترین وضعیت از نظر کم بودن غلظت قابل جذب عناصر مربوط به فصل زمستان بوده است. بیش ترین بارسالیانه عناصر از نظر غلظت قابل جذب مربوط به عنصر آهن و کمترین آن مربوط به عنصرکروم بود. با توجه به نتایج غلظت کل عناصر سنگین، اکثر فلزات اندازه گیری شده به استثنای روی، سرب و مس کمترین غلظت را در زمستان و بیشترین غلظت را به استثنای آرسنیک، روی و مس در بهار و تابستان داشتند. بحث و نتیجه گیری: کلیه عناصر مورد بررسی در لجن و بار سالیانه آن ها به استثنای آرسنیک دارای غلظت زیر حد مجاز بود. بار سالیانه آرسنیک حدود 6/1 کیلوگرم در هکتار میباشد که اگر چه از حد مجاز میزان بار سالیانه کم تر است، اما به علت نزدیک بودن به آن بایستی مورد توجه قرار بگیرد. پرونده مقاله -
دسترسی آزاد مقاله
61 - بررسی آلودگی میکروبی رودخانه هراز و تعیین کاربری های مجاز آب رودخانه با توجه به استانداردهای جهانی
ناهید شهسواری پور عباس اسماعیلی ساریمحدودیت منابع آب و افزایش احتمالی آلودگی آب ها به انواع آلاینده ها در اثر فعالیت های انسانی منجر به تشدید طرح کنترل کیفیت آب ها گردیده است. از طرفی پیامدهای اجتماعی و اقتصادی ناشی از مصرف مستقیم و غیر مستقیم آب آلوده اهمیت این کنترل را دو چندان کرده است. آلودگی مدفوعی م چکیده کاملمحدودیت منابع آب و افزایش احتمالی آلودگی آب ها به انواع آلاینده ها در اثر فعالیت های انسانی منجر به تشدید طرح کنترل کیفیت آب ها گردیده است. از طرفی پیامدهای اجتماعی و اقتصادی ناشی از مصرف مستقیم و غیر مستقیم آب آلوده اهمیت این کنترل را دو چندان کرده است. آلودگی مدفوعی منابع آب یکی از مشکلات مهم و اساسی بهداشت آب می باشد که جهت جلوگیری و پیشگیری از اپیدمی بیماری های میکروبی گوارشی، شناسایی آن ها حایز اهمیت است. به منظور مطالعه و تعیین کیفیت آب رودخانه هراز نمونه برداری از این رودخانه طی سال های 83-1382 به صورت ماهانه از 17 ایستگاه در محدوده امام زاده هاشم تا پلیس راه بایجان انجام گرفت. نمونه های آب از نظر آلودگی میکروبی با توجه به شاخص های موجود (ایشرشیاکلی، کل باکتری های مدفوعی و کلیفرم مدفوعی) مورد بررسی و آنالیز قرار گرفت. نتایج نشان داد که میزان آلودگی در پایین دست رودخانه بیشتر از بالا دست رودخانه می باشد و آلودگی میکروبی رودخانه هراز در فصل بهار در تمامی ایستگاه ها بیشتر از سایر فصول است. نتایج همچنین بیانگر این است که میانگین ایشرشیاکلی و کلیفرم در آب های رودخانه هراز در مقایسه با استانداردهای جهانی به دلیل انواع فاضلاب های خانگی، شهری، کشاورزی، ازدحام جمعیت و... از حد استاندارد تعیین شده برای اکثر کاربری ها بسیار فراتر بوده و آب این رودخانه از کیفیت بهداشتی مناسبی برخوردار نیست پرونده مقاله -
دسترسی آزاد مقاله
62 - آموزه هایی از طبیعت در طراحی معماری
علی شرقی عبدالحمید قنبرانامروزه علوم نظری بر شیوه های تحلیل علوم تجربی استوار است. در حقیقت، علوم برخاسته از قوانین طبیعت، همچون فیزیک، زیست شناسی و ... مبنای علوم و هنرهایی مانند معماری شده اند. بسیاری از معماران جدید، بخصوص پیروان دیدگاه هایی همچون آشوب و فراکتال، از علوم تجربی و طبیعی استنتا چکیده کاملامروزه علوم نظری بر شیوه های تحلیل علوم تجربی استوار است. در حقیقت، علوم برخاسته از قوانین طبیعت، همچون فیزیک، زیست شناسی و ... مبنای علوم و هنرهایی مانند معماری شده اند. بسیاری از معماران جدید، بخصوص پیروان دیدگاه هایی همچون آشوب و فراکتال، از علوم تجربی و طبیعی استنتاج معماری می کنند، لذا باید واسطه هایی پیدا کرد تا جزئیات علوم تجربی را کلی کنند و کلیات را در جزئیات معماری بیاورند. برای یافتن این واسطه ها باید سیر از جزء به کل و ازکلیات به جزئیات در معماری انجام شود. نتایج طبیعت نباید مستقیما در معماری طرح شود، بلکه در معماری باید به برداشت هایی کلی از علوم و قوانین طبیعت ارجاع کرد. فرایند از جزء به کل و از کل به جزء در خلق معماری، اگر با اصول بر گرفته از آموزه های طبیعت توام باشد، نتایج پایداری را در محصولات معماری به وجود خواهد آورد که در این مقاله به پژوهش در باب آن ها پرداخته شده است. شناخت دیدگاه های دینی، عرفانی، فلسفی و کاربردی نسبت به طبیعت مبتدای تحقیق در این مقاله است و با جستجوی رازها و اصول ماندگاری پدیده های طبیعت، سعی در عرضه ی اصول ماندگار آن که منجر به پایداری در تولیدات معماری می گردد، شده است تا این مهم حتی الامکان به آموزش پایدار در معماری منتج گردد. پرونده مقاله -
دسترسی آزاد مقاله
63 - بررسی عوامل موثر برتجزیه علفکشهای تاریخ منقضی موجود در انبارهای شرکت خدمات حمایتیکشاورزی
الهام شاهین فر احمد حیدری محمدرضا دماوندیان بابک حیدری علیزادهزمینه و هدف: آفتکشهای تاریخ منقضی در سراسر جهان به عنوان یک چالش زیست محیطی مطرح میباشند. از این رو برای جلوگیری از آسیبهای زیست محیطی ناشی از این سموم نیازمند شناخت کافی از عوامل موثر بر تجزیه آن ها به منظور برنامه ریزی دقیق و مطمئن هستیم. هزینه بازسازی و یا معدوم چکیده کاملزمینه و هدف: آفتکشهای تاریخ منقضی در سراسر جهان به عنوان یک چالش زیست محیطی مطرح میباشند. از این رو برای جلوگیری از آسیبهای زیست محیطی ناشی از این سموم نیازمند شناخت کافی از عوامل موثر بر تجزیه آن ها به منظور برنامه ریزی دقیق و مطمئن هستیم. هزینه بازسازی و یا معدومسازی آفتکشهای تاریخ منقضی در مواردی از تولید اولیه آفتکشها نیز بیشتر است. روش بررسی: این تحقیق به منظور بررسی امکان به کارگیری سموم تاریخ منقضی موجود در انبارهای شرکت خدمات حمایتیکشاورزی انجام شده است. به این منظور آزمایشهای کنترل کیفی نمونهها براساس دستورالعملهای فائو، CIPAC و شرکتهای سازنده آفتکشها انجام شد. یافته ها: نتایج حاصل براساس گروههای مختلف آفتکش، حالت فیزیکی فرمولاسیون علفکشها، شرکتهای تولید کننده، تاریخ تولید علفکشها و موقعیت اقلیمی انبارهای نگهداری آن ها دستهبندی گردید. تجزیه و تحلیل آماری توسط آزمون Chi-Square جهت تعیین اختلاف بین متغیرهای مورد مطالعه و آزمون ریسک (Risk) جهت نشان دادن ریسک نسبی تجزیه شدن با کمک نرم افزار SPSS-18 انجام شد. نتیجه گیری: نتایج نشان داد همبستگی معنا داری بین مدت زمان پس از تولید علفکشها و درصد تجزیه شدن آن ها وجود دارد. درصد تجزیه در حشره/کنهکشهای تاریخ منقضی بیشتر از علفکشها و درصد تجزیه علفکشهای تاریخ منقضی بیشتر از قارچکشها بود. درصد تجزیه علفکشهایی که در داخل کشور فرموله شده بودند معادل 52 درصد و علفکشهای هندی/ چینی معادل 67 درصد بود. نتایج نشان داد که علفکشهای مایع معادل 55 درصد و علفکشهای جامد معادل 26 درصد تجزیه شده بودند. همچنین بین چهار منطقه آب و هوایی محلهای نگهداری علفکشها به لحاظ تجزیه شدن و ماندگاری رابطه آماری معنیداری وجود نداشت. پرونده مقاله -
دسترسی آزاد مقاله
64 - بررسی تنوع گونهای گیاهان دارویی مراتع ییلاقی اسدلی-پلمیس در استان خراسان شمالی
نگین نودهی موسی اکبرلوزمینه و هدف: حفظ تنوع گونهای هدف اصلی مدیریت مراتع است. برای مدیریت اکوسیستم اولین قدم، تعیین عوامل موثر بر پراکنش گونهها و تنوع گونهای است و تنوع گونهای با خصوصیات اکوسیستم همبستگی دارد. با اندازهگیری تنوع میتوان توزیع گونهها را در محیط بررسی کرد و با تاکید بر پ چکیده کاملزمینه و هدف: حفظ تنوع گونهای هدف اصلی مدیریت مراتع است. برای مدیریت اکوسیستم اولین قدم، تعیین عوامل موثر بر پراکنش گونهها و تنوع گونهای است و تنوع گونهای با خصوصیات اکوسیستم همبستگی دارد. با اندازهگیری تنوع میتوان توزیع گونهها را در محیط بررسی کرد و با تاکید بر پویایی اکوسیستم توصیههای مدیریتی مناسب را ارایه نمود. روش بررسی: در این بررسی 90 پلات 1متر مربعی، به طور سیستماتیک-تصادفی در منطقه مورد مطالعه پیاده گردید. در هر پلات، حضور و درصد تاج پوشش گیاهان تعیین شد. ضمن شناسایی گونههای دارویی، تعلق هر گونه به جنس و خانواده، تعیین و فرم رویشی و تیپ زیستی و دوره زندگی آنها مشخص گردید. از شاخصهای تنوع شانون و مک اینتاش برای برآورد تنوع گیاهان دارویی منطقه در سطح تاکسونومیک، فرمهای رویشی، تیپ زیستی و دوره رویشی گیاهان استفاده شدند. نتیجهگیری: نتایج نشان داد که تنوع گونهای مراتع اسدلی-پلمیس در حد متوسط است و پوشش گیاهی منطقه بیشتر از گیاهان چند ساله تشکیل شده است که از مشخصه مناطق کوهستانی با اقلیم سرد ارتفاعات است. پرونده مقاله -
دسترسی آزاد مقاله
65 - بررسی فرضیه کارایی ضعیف در دو رژیم کمنوسان و پرنوسان بازار نفت خام اوپک
محمود محمدی الموتی محمدرضا حدادی یونس نادمینفت خام کالای استراتژیکی است که در طول 40 سال گذشته یکی از بزرگترین بازار کالا در جهان بوده است. بازیگران اصلی بازار، مانند تولیدکنندگان، موسسات مالی و معاملهگران فردی علاقهمند هستند تا برخی روندها و الگوهای حرکتی در عملکرد قیمتهای نفت و بازدهها را به رسمیت شناخته چکیده کاملنفت خام کالای استراتژیکی است که در طول 40 سال گذشته یکی از بزرگترین بازار کالا در جهان بوده است. بازیگران اصلی بازار، مانند تولیدکنندگان، موسسات مالی و معاملهگران فردی علاقهمند هستند تا برخی روندها و الگوهای حرکتی در عملکرد قیمتهای نفت و بازدهها را به رسمیت شناخته و از آن بهرهمند شوند. یک بازار که در آن قیمتها همیشه و بهطور کامل منعکس کننده اطلاعات موجود میباشد، کارا نامیده میشود. در این صورت، 3نوع کارایی بازار وجود دارد: فرم ضعیف کارایی، فرم نیمه قوی کارایی و فرم قوی کارایی. در پژوهشهای انجام شده عمدتا فرم ضعیف کارایی مورد آزمون قرار میگیرد. در این مطالعه نیز کارایی ضعیف بازار نفت خام اوپک برای دادههای روزانه در طول دوره 4 ژانویه 2010 الی 29 دسامبر 2017 میلادی توسط مدل مارکوف رژیم سوئیچینگ گارچ دو رژیمی مورد بررسی قرار گرفته است و نتایج حاصل از برآورد مدل حاکی از عدم کارایی در هر دو رژیم پرنوسان و کمنوسان بازار نفت خام اوپک میباشد. پرونده مقاله -
دسترسی آزاد مقاله
66 - حاکمیت شرکتی و تشکیل سرمایه؛ رویکرد بین کشوری
سید روح الله حسینی مقدم مهدی ادیب پور عباس معمارنژادهدف این مطالعه بررسی ارتباط بین حاکمیت شرکتی و تشکیل سرمایه با استفاده از کانال توسعه مالی میباشد. مطابق بررسی های انجام شده مشخص گردید تاثیر حاکمیت شرکتی بصورت مستقیم بر تشکیل سرمایه نامشخص است. بررسی داده ها نشان داد حاکمیت شرکتی از کانال توسعه مالی می تواند بر تشکیل چکیده کاملهدف این مطالعه بررسی ارتباط بین حاکمیت شرکتی و تشکیل سرمایه با استفاده از کانال توسعه مالی میباشد. مطابق بررسی های انجام شده مشخص گردید تاثیر حاکمیت شرکتی بصورت مستقیم بر تشکیل سرمایه نامشخص است. بررسی داده ها نشان داد حاکمیت شرکتی از کانال توسعه مالی می تواند بر تشکیل سرمایه اثرگذار باشد که البته این اثرگذاری در کشورهای مختلف، متفاوت است و علت آن سطح توسعه یافتگی متفاوت کشورها در جذب سرمایه و سرمایه گذار می باشد. در این مطالعه از داده های 98 کشور که شامل 67 کشور که حمایت از سرمایه گذار در آنها قوی و 31 کشور که حمایت از سرمایه گذار در آنها ضعیف است طی سالهای 2020-2005 در قالب روش Panel-GMM استفاده شده است. نتایج بررسی ها نشان داد که حاکمیت شرکتی در کشورهایی که در سطح پایینی از حمایت از سرمایه گذار قرار دادند تاثیر مثبت و معنادار بر تشکیل سرمایه دارد و بهبود حاکمیت شرکتی موجب بهبود تشکیل سرمایه می گردد. اما این رابطه برای کشورهای با سطح بالای حمایت از سرمایه گذار معنادار نبوده است. همچنین توسعه مالی در هر دو گروه کشورها تاثیر مثبت و معنادار بر تشکیل سرمایه داشته ولی میزان تاثیرگذاری آن در کشورهای با حمایت ضعیف، بیشتر بوده است. همچنین نتایج بررسی توسعه مالی در ابعاد جزئی تر نشان داد، توسعه مالی بازارها موجب بهبود تشکیل سرمایه در کشورها می گردد؛ اما توسعه مالی نهادها، تاثیری بر بهبود تشکیل سرمایه ندارد. پرونده مقاله -
دسترسی آزاد مقاله
67 - استخراج استراتژی پوشش ریسک در بازارهای پخش-پرش به کمک حساب ملیاوین
مینو بخش محمدلو رحمان فرنوشدر این مقاله مسأله پوشش ریسک را در یک بازار پخش-پرش مورد بررسی قرار می دهیم. در چنین بازاری استراتژی پوشش ریسک کامل موجود نیست، بنابراین استراتژی ای مناسب است که ریسک باقی مانده را مینیمم کند. برای این منظور ما به دو روش متفاوت ریسک باقی مانده را محاسبه می کنیم، یکی با چکیده کاملدر این مقاله مسأله پوشش ریسک را در یک بازار پخش-پرش مورد بررسی قرار می دهیم. در چنین بازاری استراتژی پوشش ریسک کامل موجود نیست، بنابراین استراتژی ای مناسب است که ریسک باقی مانده را مینیمم کند. برای این منظور ما به دو روش متفاوت ریسک باقی مانده را محاسبه می کنیم، یکی با استفاده از فرمول ایتو و دیگری به کمک فرمول تعمیم یافته کلارک-اکن. سپس با مشتق گیری نسبت به پارامتر استراتژی، واریانس ریسک را مینیمم می کنیم. نتایج نشان می دهد زمانی که فرآیند قیمت دارای ساختار مارکفی است هر دو روش منتهی به یک استراتژی پوشش ریسک خواهند شد. همچنین استفاده از حساب ملیاوین و نسخه تعمیم یافته فرمول کلارک-اکن شرط قوی مشتق پذیری روی را به شرط با مشتق کراندار روی ‎ ‎ ‎ تقلیل می دهد. این امر قدرت حساب ملیاوین در مسأله پوشش ریسک را نشان می دهد. پرونده مقاله -
دسترسی آزاد مقاله
68 - An Efficient Numerical Algorithm For Solving Linear Differential Equations of Arbitrary Order And Coefficients
S. Hatamzadeh-Varmazyar Z. MasouriReferring to one of the recent works of the authors, presented in~\cite{differentialbpf}, for numerical solution of linear differential equations, an alternative scheme is proposed in this article to considerably improve the accuracy and efficiency. For this purpose, tr چکیده کاملReferring to one of the recent works of the authors, presented in~\cite{differentialbpf}, for numerical solution of linear differential equations, an alternative scheme is proposed in this article to considerably improve the accuracy and efficiency. For this purpose, triangular functions as a set of orthogonal functions are used. By using a special representation of the vector forms of triangular functions and the related operational matrix of integration, solving the differential equation reduces to solve a linear system of algebraic equations. The formulation of the method is quite general, such that any arbitrary linear differential equation may be solved by it. Moreover, the algorithm does not include any integration and, instead, uses just sampling of functions, that results in a lower computational complexity. Also, the formulation of this approach needs no modification when a singularity occurs in the coefficients of differential equation. Some problems are numerically solved by the proposed method to illustrate that it is much more accurate and applicable than the prior method in~\cite{differentialbpf}. پرونده مقاله -
دسترسی آزاد مقاله
69 - Numerical Solution of Second Kind Volterra and Fredholm Integral Equations Based on a Direct Method Via Triangular Functions
S. Hatamzadeh-Varmazyar Z. MasouriA numerical method for solving linear integral equations of the second kind is formulated. Based on a special representation of vector forms of triangular functions and the related operational matrix of integration, the integral equation reduces to a linear system of al چکیده کاملA numerical method for solving linear integral equations of the second kind is formulated. Based on a special representation of vector forms of triangular functions and the related operational matrix of integration, the integral equation reduces to a linear system of algebraic equations. Generation of this system needs no integration, so all calculations can easily be implemented. Numerical results for some examples show that the method has a good accuracy. پرونده مقاله -
دسترسی آزاد مقاله
70 - A Study on Analytical Solutions of the Fuzzy Partial Differential Equations
R. Ghasemi Moghaddam S. Abbasbandy M. Rostamy-MalkhalifehIn the present paper, we obtain the traveling wave fuzzy solution for the fuzzy linear Transport equation and the fuzzy Wave equation by considering the type of generalized Hukuhara differentiability. The d'Alembert's formulas for the fuzzy Wave equation obtained by Con چکیده کاملIn the present paper, we obtain the traveling wave fuzzy solution for the fuzzy linear Transport equation and the fuzzy Wave equation by considering the type of generalized Hukuhara differentiability. The d'Alembert's formulas for the fuzzy Wave equation obtained by Considering the type of gH-differentiability of the solution. Also, The existence and the uniqueness of these solutions and the stability of the fuzzy Wave equation are shown. پرونده مقاله -
دسترسی آزاد مقاله
71 - Investigating the relationship between economic and financial factors of decision-making units and bank facilities in the form of Islamic contracts with Emphasis on Oil Price and Monetary Policy Shocks
morteza haghgoy haghighi, marjan damankeshideh manijeh hadinejad Khashayar Syed Shokri Mohammad Reza Mirzaei NejadThe extant study was conducted to explain the mechanism of economic-financial factors affecting Islamic contracts of Iran with emphasis on oil price shocks using Structural Autoregressive Regression (SVAR) during 1986-2019. According to estimated SVAR results, an oil pr چکیده کاملThe extant study was conducted to explain the mechanism of economic-financial factors affecting Islamic contracts of Iran with emphasis on oil price shocks using Structural Autoregressive Regression (SVAR) during 1986-2019. According to estimated SVAR results, an oil price shock caused a 5% and 1% decline in production and employment rate, respectively. The results also indicated that one shock imposed by the oil price shock led to a 7% reduction in Islamic facilities in Iran, and one shock caused by liquidity led to a 9% rise in Islamic facilities and loans. In terms of the effect of oil price fluctuations on Islamic banking contracts, it could be explained that increased government budget or government expenditures, including current and construction expenditures caused by higher oil prices and incomes, along with growing banking credits and loans led to higher aggregate demand. On the other hand, the rigidity of aggregate supply resulting from technical and infrastructural constraints led to imbalance and wide supply-demand gap, and inflationary pressures. In other words, an increase in real efficiency contributes to higher production costs and inflation rates, which in turn causes liquidity withdrawal from banks and investment in other profitable markets. Furthermore, in case of increased real efficiency, only those who can spend the received loans in speculation and intermediation transactions can receive and repay the loans. Under such circumstances, banks must monitor the transaction more because such loans cannot be repaid through productive activities. The aforementioned factors cause ambiguous effects of real efficiency on investment, production, and Islamic loans. پرونده مقاله -
دسترسی آزاد مقاله
72 - The effects of MHD flow of third grade fluid by means of meshless local radial point interpolation (MLRPI)
S. Abbasbandy E. ShivanainThe meshless local radial point interpolation (MLRPI) method is applied to examine the magnetohydrodynamic (MHD) ow of third grade uid in a porous medium. The uid saturates the porous space between the two boundaries. Several limiting cases of fundamental ows can be obt چکیده کاملThe meshless local radial point interpolation (MLRPI) method is applied to examine the magnetohydrodynamic (MHD) ow of third grade uid in a porous medium. The uid saturates the porous space between the two boundaries. Several limiting cases of fundamental ows can be obtained as the special cases of present analysis. The variations of pertinent parameters are addressed. پرونده مقاله -
دسترسی آزاد مقاله
73 - The Solution of Fully Fuzzy Quadratic Equations Based on Restricted Variation
L. Gerami ‎MoazamFirstly, in this paper, we apply the Fuzzy Restricted Variation Method to achieve an analytical and approximate unsymmetrical fuzzy solution for Fully Fuzzy Quadratic Equation. In this application, after finding the real root of 1-cut of $\tilde{A}\tilde{X}^{2}+\tilde{B چکیده کاملFirstly, in this paper, we apply the Fuzzy Restricted Variation Method to achieve an analytical and approximate unsymmetrical fuzzy solution for Fully Fuzzy Quadratic Equation. In this application, after finding the real root of 1-cut of $\tilde{A}\tilde{X}^{2}+\tilde{B}\tilde{X}+\tilde{C}=\tilde{D}$, initial guess is always chosen with possible unknown parameters that leads to highly accurate solution. This technique is applying to solve mentioned equation in four cases via the sign of coefficients and variable that there is not zero in support of them and we solve the problems to find positive or negative solution. This method has been shown to solve effectively, easily and accurately a large class of nonlinear quadratic equations with approximations converging rapidly to accurate solution. In this paper we present the solutions in four cases with formulas, that can be used to write the algorithm for this technique. Finally to illustrate easy application and rich behavior of this method, several examples are ‎given.‎ پرونده مقاله -
دسترسی آزاد مقاله
74 - On Optimal Quadrature Rule for Solving Fuzzy Fredholm Integral Equations
R. Ezzati M. M. SadatrasouIn this paper, we present an efficient iterative procedure based on optimal fuzzy quadrature formula to solve fuzzy integral equations. Error estimation and the numerical stability analysis with respect to the choice of the first iteration are given. Some illustrative a چکیده کاملIn this paper, we present an efficient iterative procedure based on optimal fuzzy quadrature formula to solve fuzzy integral equations. Error estimation and the numerical stability analysis with respect to the choice of the first iteration are given. Some illustrative and comparative numerical experiments confirm the optimization of the successive ‎method.‎ پرونده مقاله -
دسترسی آزاد مقاله
75 - بررسی جبران خسارات وارده بر محیط زیست ناشی از آلودگیهای فرامرزی و تخریب بین المللی محیط زیست
فرهاد دبیر ی - سید عباس پورهاشمی مریم السادات موسویخسارت ،ضرر و زیان وارد بر اموال و داراییهاست ناشی از عمل یک کشور و یا یک سازمان بین المللی ،که طبق قواعد حقوق بین الملل باید جبران گردد،در خصوص محیط زیست و مسایل مربوط به آن نیز جبران خسارات مطرح است بخصوص آنجا که عملکرد دولتها ویا اتباع آنها موجب آلودگیهاو تخریب محیط ز چکیده کاملخسارت ،ضرر و زیان وارد بر اموال و داراییهاست ناشی از عمل یک کشور و یا یک سازمان بین المللی ،که طبق قواعد حقوق بین الملل باید جبران گردد،در خصوص محیط زیست و مسایل مربوط به آن نیز جبران خسارات مطرح است بخصوص آنجا که عملکرد دولتها ویا اتباع آنها موجب آلودگیهاو تخریب محیط زیست می گرددوزیانهایی در سطح بین المللی را در پی دارد.روشهای متعددی در حقوق بین الملل برای جبران خسارات پیش بینی و مقرر شده اما از تمامی آنها نمی توان در حقوق بین الملل محیط زیست بهره جست .معمولترین روش جبران خسارت در حقوق محیط زیست پرداخت غرامت است . پرونده مقاله -
دسترسی آزاد مقاله
76 - مقایسه تطبیقی ویژگیها و زمینههای پیدایش حماسه و رمان از منظر لوکاچ
پژمان دادخواه حسن بلخاری قهی مجید سرسنگیلوکاچ فیلسوف، نظریهپرداز و منتقد ادبی برجسته دوران معاصر در آثار خود به تفصیل به صورتهای گوناگون ادبی پرداخته و ویژگیها و ساز و کارهای آنها را بیان نموده است؛ به همین جهت لوکاچ را میتوان فیلسوف و نظریهپرداز صورتهای ادبی دانست. حماسه و رمان دو صورت ادبی مورد مطالع چکیده کامللوکاچ فیلسوف، نظریهپرداز و منتقد ادبی برجسته دوران معاصر در آثار خود به تفصیل به صورتهای گوناگون ادبی پرداخته و ویژگیها و ساز و کارهای آنها را بیان نموده است؛ به همین جهت لوکاچ را میتوان فیلسوف و نظریهپرداز صورتهای ادبی دانست. حماسه و رمان دو صورت ادبی مورد مطالعه وی است که در آثار خود از آنها بحث نموده و ویژگیها و بنیانهای شکلگیری آنها را بیان کرده است. یکی از مفاهیم اساسی در اندیشه لوکاچ ارتباط ساختارهای اجتماعی و ساختارهای ادبی میباشد و طبق این دیدگاه هر جامعهای صورت ادبی خاص خود را خلق میکند. لوکاچ حماسه را صورت ادبی دوران باستان و رمان را صورت ادبی دوران معاصر میداند و بر این مبنا ویژگیها و تفاوتهای آنها را بیان میکند. در این راستا تأکید پژوهش حاضر و نقطه عزیمت آن بازخوانی آراء لوکاچ در خصوص حماسه و رمان و مطالعه تطبیقی و بررسی وجوه اشتراک و تمایز این دو صورت ادبی و ویژگیهای آنها میباشد. بنابراین برای نیل به این اهداف از روش توصیفی- تحلیلی استفاده شده و اطلاعات این جستار به شیوه کتابخانهای اسنادی گردآوری شدهاند. پرونده مقاله -
دسترسی آزاد مقاله
77 - دیدگاه مشترک والت ویتمن و سهراب سپهری
حسبن پایندهدر مقالة حاضر، ضمن مقایسه شعر هنگامی که سخنان ستاره شناس دانشور را شنیدم از والت ویتمن و آخرین بند شعر هم سطر، هم سپید سهراب سپهری، سعی شده است میزان مشابهت دیدگاه های عارفانه و شکل اشعار این دو شاعر نشان داده شود. شباهت جالب توجه بین اشعام ویتمن و سپهری، طریقی است که چکیده کاملدر مقالة حاضر، ضمن مقایسه شعر هنگامی که سخنان ستاره شناس دانشور را شنیدم از والت ویتمن و آخرین بند شعر هم سطر، هم سپید سهراب سپهری، سعی شده است میزان مشابهت دیدگاه های عارفانه و شکل اشعار این دو شاعر نشان داده شود. شباهت جالب توجه بین اشعام ویتمن و سپهری، طریقی است که آ نها برای بیان افکار شان به کار برده اند: و از این رو، شیوه نقد این شعرها در مقالة حاضر، اساس فرمالیستی است. پرونده مقاله -
دسترسی آزاد مقاله
78 - دراسه التَّخْمیس و أنواعه بوصفه قالبا أدبیا مشترکا بین الأدبَین الفارسىّ والعربىّ
على صابرىإن القوالب الأدبیه بکونها وسیله لتنظیم عناصرالأدب و سببا للوحده العضویهْ فى الأعمال الفنیهْ قد نجدها کعنصر مشترک بین آداب الأمم المختلفهْ ، و بما أن العلاقا تالموجودهْ بین الأدبین الفارسى والعربى عریقهْ جدا بالنسبهْ إلى الآدا بالأخرى فنرى هذه الصلات المتبادلهْ والقوالب چکیده کاملإن القوالب الأدبیه بکونها وسیله لتنظیم عناصرالأدب و سببا للوحده العضویهْ فى الأعمال الفنیهْ قد نجدها کعنصر مشترک بین آداب الأمم المختلفهْ ، و بما أن العلاقا تالموجودهْ بین الأدبین الفارسى والعربى عریقهْ جدا بالنسبهْ إلى الآدا بالأخرى فنرى هذه الصلات المتبادلهْ والقوالب المشترکهْ بینهما أوثق و أوسع منها بین الآدا بالأخرى؛ و من هذه القوالب المتبادلهْ قالب التخمیس الذى استخدمه الأدباء فى الأدبین مشترکا، رغم ما من خلاف فیه لدى الشعراءالفرس والعرب، و هو یعد أحدالعلاقات المشترکهْ عبرالعصور، کما أن کلاالأدبین یشترکان فى عوامل ظهور هذاالقالب و نشأته، و إننا عالجناه فى هذاالمقال بوصفه صلهْ من الصلات المشترکهْ بین الأدبین الفارسى والعربى. پرونده مقاله -
دسترسی آزاد مقاله
79 - بررسی عنصر موسیقی در شعر محمود سامی البارودی و ملک الشعرای بهار
جواد کارخانه اسماعیل نادری نعمان اونقموسیقی از برجسته ترین عناصر شعری در ادبیات هر ملتی است. در این میان ادبیات برخی ملت ها چون ادبیات فارسی و عربی از عناصر موسیقایی یکسانی در اشعارشان برخوردارند. در این پژوهش، سعی بر آن است تا با تکیه بر این عنصر، اشعار دو شاعر برجسته و معاصر عربی و ایرانی محمود سامی البا چکیده کاملموسیقی از برجسته ترین عناصر شعری در ادبیات هر ملتی است. در این میان ادبیات برخی ملت ها چون ادبیات فارسی و عربی از عناصر موسیقایی یکسانی در اشعارشان برخوردارند. در این پژوهش، سعی بر آن است تا با تکیه بر این عنصر، اشعار دو شاعر برجسته و معاصر عربی و ایرانی محمود سامی البارودی و ملک الشعرای بهار تحلیل و بررسی شوند، تا نحوه بکارگیری عوامل موسیقی ساز در اشعار این دو شاعر آشکار شود. برای رسیدن به این مقصود موسیقی اشعار آنها از دو جنبه مهم: موسیقی بیرونی (وزن، قافیه وردیف) و موسیقی درونی(جناس و سجع و تکرار با زیرشاخه واجآرایی و تکرار لفظ و تکرار هجا همچنین رد العجز علی الصدر و طرد و عکس) بررسی شده است. با این فرضیه که هر دو شاعر توانسته اند با استفاده از ابزارهای موسیقی ساز نغمههای دلنشینی را بر تارهای شعرشان تصنیف نمایند. نتایج این بررسی نشان میدهد شباهت زیادی میان این دو شاعر مشهود است. پرونده مقاله -
دسترسی آزاد مقاله
80 - ارزیابی نظریهی ظاهرگرایی جمالالدین قاسمی در تفسیر محاسنالتأویل (موردپژوهی: صفات الهی)
کبری حیدری کیوان احسانی علی حسنبگی فاطمه دسترنجمسئلهی ظاهرگرایی در آیات قرآن از جمله موضوعات مورد توجه میان برخی مفسران، به ویژه جمال-الدین قاسمی است. قاسمی از مفسران منسوب به جریان سلفیه است و همین امر سبب شده تا وی مبانی فکری خود را بخصوص دربارهی صفات خداوند، از پیشگامان این جریان وام گیرد. رؤیت بصری خداوند در ق چکیده کاملمسئلهی ظاهرگرایی در آیات قرآن از جمله موضوعات مورد توجه میان برخی مفسران، به ویژه جمال-الدین قاسمی است. قاسمی از مفسران منسوب به جریان سلفیه است و همین امر سبب شده تا وی مبانی فکری خود را بخصوص دربارهی صفات خداوند، از پیشگامان این جریان وام گیرد. رؤیت بصری خداوند در قیامت، تکلم خداوند با موسی(ع)، استوای حقیقی خداوند بر عرش، استهزاء و غضب الهی در معنای حقیقی آن، صفاتی است که قاسمی معتقد به ظاهرگرایی آن است. اما با بررسیهای انجام شده مشخص شد تفسیر قاسمی از این آیات صحیح نیست؛ زیرا در نظرگرفتن رؤیت، استواء، تکلم، استهزاء و غضب در معنای حقیقی برای خداوند مستلزم جسم است، از این رو میتوان گفت رویکرد قاسمی با دلایل قطعی و یقینی ناسازگار است؛ لذا باید در ظاهر آیات صفات تصرف کرد و آن را تأویل نمود. این پژوهش با روش توصیفی ـ تحلیلی به ارزیابی رویکرد ظاهرگرایانهی قاسمی از آیات صفات خداوند پرداختهاست. پرونده مقاله -
دسترسی آزاد مقاله
81 - رؤیة إلى العناصر الروائیة
حسن شوندی آزاده کریمالروایة أکبر أنواع القصص من حیث طولها، تحتوی علی العدید من الشخصیات، لکل منها اختلاجاتها وانفعالاتها الخاصة. وتعتبر الروایة من أنواع الأدب النثری. کانت القصص فی بدءها ضعیفة من حیث الأسلوب. وعلی مر العصور تطورت الروایة بسبب کثرة الارتباط بخارج شبه الجزیرة العربیة. وتناول چکیده کاملالروایة أکبر أنواع القصص من حیث طولها، تحتوی علی العدید من الشخصیات، لکل منها اختلاجاتها وانفعالاتها الخاصة. وتعتبر الروایة من أنواع الأدب النثری. کانت القصص فی بدءها ضعیفة من حیث الأسلوب. وعلی مر العصور تطورت الروایة بسبب کثرة الارتباط بخارج شبه الجزیرة العربیة. وتناولت الروایة مشاکل الحیاة ومواقف الإنسان منها فی ظل التطور الحضاری السریع، وعالجت موضوعات تاریخیة، واجتماعیة، وعاطفیة. تتکون الروایة من عناصر مهمة، منها: الحدث، الشخصیة، البیئة، الأسلوب، الحبکة، الحوار. پرونده مقاله -
دسترسی آزاد مقاله
82 - النقدالأدبی بین المفاضلة والموازنة والمقارنة
میثم طارمإن النقد الأدبی (litratary criticism) نوع من أنواع النشاطات النظریة فی الأدب یبتغی الناقد من خلاله (critic) تحلیل (explication) الآثار الأدبیة و تقییمها لیُبدی رأیه فیها استنادا إلی مقاییس النقد و معاییره و إنه الیوم یُعَدّ فنا من الفنون الأدبیة. و بما أن هذه المعاییر ت چکیده کاملإن النقد الأدبی (litratary criticism) نوع من أنواع النشاطات النظریة فی الأدب یبتغی الناقد من خلاله (critic) تحلیل (explication) الآثار الأدبیة و تقییمها لیُبدی رأیه فیها استنادا إلی مقاییس النقد و معاییره و إنه الیوم یُعَدّ فنا من الفنون الأدبیة. و بما أن هذه المعاییر تختلف من عصر إلی عصر و من ناقد إلی ناقد آخر فنری أن النقاد قد نهجوا فیه مناهج مختلفة و سلکوا مسالک متبانیة.فالنقد و إن طرأت علیه فی طریقه نحو التقدم و الرقیّ مناهج مختلفة و نزعات متباینة،‌إلا أننا اخترنا من تلک المناهج الکثیرة منهجا واحدا لندرسه عبرالتاریخ و نعالج فی مقالنا هذا خط سیر هذا المنهج النقدی فی‌الأدب العربی و مدی إسهامه فی توسیع آفاق النقد الأدبی، و هوالأسلوب النقدی الذی یمکن لنا أن نسمیّه فی عصرٍ المفاضلة و فی عصرٍ الموازنة و فی عصرٍ آخر المقارنة فإنه قد خلّف للأدب العربی ثروة نقدیة عظیمة رغم ما کان یتأثر أحیانا بالعصبیات والأهواء. پرونده مقاله -
دسترسی آزاد مقاله
83 - بررسی تعارض تحریم و جرم انگاری پول شویی با قواعد فقهی لاضرر و ملکیت ید
محمد امین ملکی سید محمد مهدی احمدی علی رضا عسگرییکی از جرایم نوپدید که در حقوق کیفری و مدنی کشورها مورد بررسی و جرم انگاری قرار گرفته است پول شویی است. فقها در مواجهه با این جرم نوپدید و با استناد به عناوینی چون حرمت اکل مال به باطل، حرمت غصب، حرمت تعاون بر اثم، احکام مصلحت و.... پولشویی را حرام نمودند. برخی حقوق دان چکیده کاملیکی از جرایم نوپدید که در حقوق کیفری و مدنی کشورها مورد بررسی و جرم انگاری قرار گرفته است پول شویی است. فقها در مواجهه با این جرم نوپدید و با استناد به عناوینی چون حرمت اکل مال به باطل، حرمت غصب، حرمت تعاون بر اثم، احکام مصلحت و.... پولشویی را حرام نمودند. برخی حقوق دانان معتقدند در ظاهر، تحریم و جرم انگاری پول شویی، با مفهوم برخی قواعد فقهی نظیر ملکیت ید و لاضرر دارای تعارض می باشد و با توجه به این تعارض های ظاهری، جرم انگاری پول شویی را مورد تشکیک قرار داده اند. در این تحقیق با مراجعه به آرا فقها در این قواعد فقهی می بینیم، نه تنها تعارضی مستقر نیست، بلکه تداخلات ظاهریِ مستقر شده با استفاده از راه هایی چون ضرورت، مصالح جامعه ی اسلامی و دفع ظن ضعیف به ظن قوی، مرتفع می گردد؛ و خللی در تحریم و یا جرم انگاری پول شویی وارد نمی شود. این تحقیق به شیوه ی کتابخانه ای با روش توصیفی گردآوری شده است. پرونده مقاله -
دسترسی آزاد مقاله
84 - ارزیابی اثر ضد لیشمانیایی عصاره الکلی برگ گیاه کاسنی بر پروماستیگوت های انگل لیشمانیا ماژور (MHOM/IR/75/ER)
میترا نصرآزادانی محسن زرگر منیر دودی پریسا شعاعیمقدمه و هدف : لیشمانیازیس بیماری است که توسط تک یاخته ای از جنس لیشمانیا ایجاد می شود و می تواند به عنوان یک بیماری مشترک انسان و دام مورد بررسی قرار بگیرد.مطالعه حاضر با هدف ارزیابی اثر ضد لیشمانیایی عصاره الکلی برگ گیاه کاسنی بر پروماستیگوت های انگل لیشمانیا ماژور درش چکیده کاملمقدمه و هدف : لیشمانیازیس بیماری است که توسط تک یاخته ای از جنس لیشمانیا ایجاد می شود و می تواند به عنوان یک بیماری مشترک انسان و دام مورد بررسی قرار بگیرد.مطالعه حاضر با هدف ارزیابی اثر ضد لیشمانیایی عصاره الکلی برگ گیاه کاسنی بر پروماستیگوت های انگل لیشمانیا ماژور درشرایط آزمایشگاهی طراحی و اجرا شد. روش بررسی :ابتدا عصاره به روش خیساندن آماده شد. سپس عصاره خشک شد و در DMSO 5% حل شد. در مرحله بعد پروماستیگوت های لیشمانیا ماژور در دمای°C2±25در فاز ثابت در محیط 1640 RPMIغنی شده با سرم جنین گوساله FCS10% و آنتی بیوتیک پنی سیلین - استرپتومایسین کشت داده شد. سپس با استفاده از روش رنگ سنجی MTT، فعالیت بیولوژیکی عصاره گیاهی در مقایسه با گلوکانتیم روی پروماستیگوت های لیشمانیا ماژور مورد بررسی قرار گرفت. میزان جذب نوری ، به وسیله دستگاه الیزا ریدر(ElisA reader ) سنجیده شده و سپس مقدار50 ICمحاسبه گردید. همه تست ها 3 بار تکرار شد. یافته ها: 50IC گلوکانتیم 18/ 616 میکروگرم بر میلی لیتر بود و 50IC برای عصاره الکلی 1094 میکروگرم بر میلی لیتر بود. هر چند که ، گلوکانتیم با غلظت کمتر مؤثرتر از عصاره گیاه مورد نظر بود، اما عصاره الکلی برگ گیاه کاسنی دارای اثرات قابل ملاحظه ای روی پروماستیگوتهای لیشمانیا ماژور بود.نتیجه گیری: با توجه به این که عصاره الکلی برگ گیاه کاسنی دارای اثرات ضد لیشمانیایی در محیط آزمایشگاه می باشد، لزوم انجام آزمایشات بیشتر برای ارزیابی اثر این عصاره بر روی انگل لیشمانیا در مدل حیوانی احساس می شود. پرونده مقاله -
دسترسی آزاد مقاله
85 - تطبیق کهنالگوهای صورمثالی در سعادتنامۀ استرآبادی و ساقینامۀ ترشیزی براساس نظریۀ یونگ
زینب نوروزعلی احمد خطیبی خیالی علی اصغر حلبینوشتار حاضر تلاشی برای یافتن کهنالگوی صورمثالی در سعادتنامۀ استرآبادی و ساقینامۀ ترشیزی است. کهنالگوها، روان و اندیشۀ جمعی هستند که در هر مکان و زمان، پدید میآیند و به دلیل فراوانی تجربیات انسانی، تعداد کهنالگوها دقیقا مشخص نیست. کهنالگوها بیانگر حالات روانی خاص چکیده کاملنوشتار حاضر تلاشی برای یافتن کهنالگوی صورمثالی در سعادتنامۀ استرآبادی و ساقینامۀ ترشیزی است. کهنالگوها، روان و اندیشۀ جمعی هستند که در هر مکان و زمان، پدید میآیند و به دلیل فراوانی تجربیات انسانی، تعداد کهنالگوها دقیقا مشخص نیست. کهنالگوها بیانگر حالات روانی خاصی از انسان هستند، میتوان با تأویل و تفسیر آنها در اشعار، به ویژگیهای خاص روانی و جهانبینی شاعران دست یافت. از نمونههای صورمثالیِ فردیت‎یابی یونگی، میتوان مادرمثالی، آنیما- آنیموس، سایه، پرسونا و خود را نام برد. یونگ این مفاهیم را اجزای ساختاری موروثی روان بشر میداند. حرکت از من به سوی خود مستلزم انکشاف لایه های مختلف ناخودآگاهی است که به آن میپردازیم. ساقینامه و سعادتنامه از جمله آثاری هستند که تحقیقات کافی درمورد آنها صورت نگرفته و بسیاری از موضوعات آنها پنهان مانده است. با استخراج کهن الگوی صورمثالی این دو اثر، میتوان کمک شایانی به تفسیر ابیات نمود. ما صورمثالی در دو دیوان شعری را مورد ارزیابی قرار داده و بر آنیم تا به سوالهای مطرح شده پاسخ دهیم: استرآبادی و ترشیزی از تمام مفاهیم کهنالگوی صورمثالی در آثار مورد بحث، استفاده کردهاند؟ و کدام یک از مفاهیم صورمثالی دراشعار استرآبادی و ترشیزی بیشترین و کمترین بسامد را دارد. نهایتا این نتیجه بهدست آمد که هر دو شاعر از تمام مفاهیم کهنالگوی مثالی در اثر خود استفاده کردهاند. سایه و آنیما در سعادتنامه و ساقینامه بیشترین بسامد و آنیموس در هر دو اثر کمترین بسامد را دارد. این پژوهش به روش کتابخانهای و به شیوۀ تحلیلیتوصیفی انجام میگردد. پرونده مقاله -
دسترسی آزاد مقاله
86 - تحلیل فرمالیستی سه غزل از غزلیات شمس
ژاله اختریار آذر فاطمه امامی مریم ارجمندفرمالیسم روسی یکی از تاثیر گذار ترین مکاتب نقد ادبی است که ادبیات را از دیدگاه زبان شناسی بررسی می کند. رویکرد فرمالیستی اغلب به جانب صوری متون ادبی نظر دارد و معتقد است که این صور ادبی است که حمل معنا می کند و معنا هیچ نیست، الا ارتباط های بین اجزای صوری کلام. پژوهشگر چکیده کاملفرمالیسم روسی یکی از تاثیر گذار ترین مکاتب نقد ادبی است که ادبیات را از دیدگاه زبان شناسی بررسی می کند. رویکرد فرمالیستی اغلب به جانب صوری متون ادبی نظر دارد و معتقد است که این صور ادبی است که حمل معنا می کند و معنا هیچ نیست، الا ارتباط های بین اجزای صوری کلام. پژوهشگر در این مقاله سه غزل را از دیدگاه فرمالیسم روسی و بر اساس نظریه یاکوبسن و گرامون به روش توصیفی – تحلیلی بررسی کرده است. شایان ذکر است مولانا از طریق واژه های مکرر، توازن، تصویر سازی، استعاره، شیوه بیان، درنگ، تکیه و تاکیدو لحن هایی را در غزل ایجاد کرده است که با بعد عاطفی اثر در تعامل است. نقش هنرسازهها که از اصول فرمالیستهاست جنبه زیبایی شناسی در غزلیات مولانا دارد و موجب ابداع و نوع آوری در ساخت و صورت ابیات شده است تا از طریق توازن، آشنایی زدایی، هنجارگریزی، تصاویر استعاری و مجازی بر غنا و هنری تر شدن غزلیات بیفزاید. پرونده مقاله -
دسترسی آزاد مقاله
87 - بررسى کنایات شاهنامه در بخش تاریخى
هادی خدیور ملوک شفیعى اقدمدر فایل اصل مقاله موجود است.در فایل اصل مقاله موجود است. پرونده مقاله -
دسترسی آزاد مقاله
88 - H3PW12O40 and Nano-sized Titania Supported on Urea Formaldehyde Resin for Photo catalytic Decolorization of Dye Pollutants in Aqueous Solution
Hossein Salavati Marzieh Mousavi-Dashti Mousavi-DashtiIn this work, H3PW12O40 (PPT) and nano-sized titania supported on urea formaldehyde (UF) resinwas prepared via an impregnation method. The prepared sample was characterized by X-raydiffraction (XRD), UV-Vis spectrophotometer, Fourier transform infrared spectroscopy (FT- چکیده کاملIn this work, H3PW12O40 (PPT) and nano-sized titania supported on urea formaldehyde (UF) resinwas prepared via an impregnation method. The prepared sample was characterized by X-raydiffraction (XRD), UV-Vis spectrophotometer, Fourier transform infrared spectroscopy (FT-IR),scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The photocatalytic activity of the PPT/TiO2/UF sample was evaluated by the decolorization of BromothymolBlue (BB), Direct Yellow12 (DY) and Texas Red (TR) dye solutions under UV-Vis and visiblelight irradiation. The optical property of the PPT/TiO2/UF sample was evaluated by UV-Visspectrum. The effect of photocatalyst dosage and dye concentration on photo catalyticdecolorization of dyes was investigated. Photo catalytic efficiency of the PPT/TiO2/UF sample wascompared with TiO2/UF sample. Moreover, the reusability of the sample was examined. پرونده مقاله -
دسترسی آزاد مقاله
89 - Selective and Validated SpectrophotometricMethods for Determination of Acyclovir and Ganciclovirwith 2, 4 as Reagent
T. Anil Kumar B. M. Gurupadayya M.B. Rahul Reddy M.V. PrudhviRajuNew, simple and sensitive spectrophotometric methods for the determination of acyclovir and ganciclovirhave been developed. The method is based on the oxidation of 2, 4-dinitrophenyl hydrazine (2, 4 DNP) and coupling of the oxidized product with acyclovir and ganciclovi چکیده کاملNew, simple and sensitive spectrophotometric methods for the determination of acyclovir and ganciclovirhave been developed. The method is based on the oxidation of 2, 4-dinitrophenyl hydrazine (2, 4 DNP) and coupling of the oxidized product with acyclovir and ganciclovirto give intensely coloredchromogen. Acyclovir and ganciclovirshowed maximum absorbance at 414 nm and 450 nm with linearity was observed in the concentration range of 20-60 µg mL-1 and 5-25 µg mL-1 respectively. The relative standard deviations of 0.016 for acyclovir and 0.014 ganciclovirwere obtained. The recoveries of acyclovir and ganciclovirtablets are in the range98.48, 99.28respectively. The proposed method is simple, rapid, precise and convenient for the assay of acyclovir and ganciclovirin commercial tablet preparations. پرونده مقاله -
دسترسی آزاد مقاله
90 - Aging Study of Transformer Oil-Impregnated Repulped and Standard Cellulose by Measuring of 2-furfural Content of the Oil
Ali Ramazani Rana Rahmati Solmaz Bigdeli Sohrab Rahmani Mehrdad HamidiIn order to evaluate the reliability of using repulped cellulose in transformers, the aging process was applied on standard and repulped cellulose in a laboratory accelerated model by increasing of temperature to 150 ° C and their behavior was monitored by measuri چکیده کاملIn order to evaluate the reliability of using repulped cellulose in transformers, the aging process was applied on standard and repulped cellulose in a laboratory accelerated model by increasing of temperature to 150 ° C and their behavior was monitored by measuring the amount of 2-furfural released in oil by HPLC (High Performance Liquid Chromatography) in the consecutive aging periods and the results was compared. The results were fitted to estimate the aging behaviors according to the content of 2 - furfural that released in oil. The obtained results showed that behavior of two types of cellulose is almost the same. Therefore, it can be concluded that the moulded insulating parts made of repulped cellulose can be used in the insulation system of power transformers with a good and acceptable reliability. پرونده مقاله -
دسترسی آزاد مقاله
91 - A Combined Experimental and Theoretical Study of Optoelectronic and Structural Properties of a New Copolymer Based on Polyvinylcarbazole (PVK) and Poly (3-hexylthiophene) (PHT)
Z. El Malki L. Bejjit M. Haddad M. Hamidi M. BouachrineIn this paper we report on a combination of experimental and theoretical study of a new copolymer based on carbazole and methylthiophene (Cbz-Mth), in their neutral and oxidized states. We discuss the influence of chain length on conformational and optoelectronic proper چکیده کاملIn this paper we report on a combination of experimental and theoretical study of a new copolymer based on carbazole and methylthiophene (Cbz-Mth), in their neutral and oxidized states. We discuss the influence of chain length on conformational and optoelectronic properties with the DFT method. Conformational analysis shows that there are no big changes in the structural parameters of neutral oligomers. In the doped form, the oligomer structures become nearly planar and show a quinoidal character. The results obtained for (Cbz-Mth)3 from the neutral state, are close to experimental values. پرونده مقاله -
دسترسی آزاد مقاله
92 - Pickering Emulsion Polymerization of Styrene-co-butyl Acrylate Nanoparticles by Using Cloisite Na+ as Surfactant
Mojgan Mirzataheri Shahram Khamisabadi Ali SalimiCloisite Na+was used as a solid surfactant (stabilizer) in Pickering emulsion polymerization of styrene-co-butyl acrylate in presence of oil soluble initiator, azobisisobutyronitrile (AIBN) and water soluble initiator, potassium persulfate (KPS). Fourier transform inf چکیده کاملCloisite Na+was used as a solid surfactant (stabilizer) in Pickering emulsion polymerization of styrene-co-butyl acrylate in presence of oil soluble initiator, azobisisobutyronitrile (AIBN) and water soluble initiator, potassium persulfate (KPS). Fourier transform infrared (FTIR) spectrum approved the corporation of Cloisite Na+ layers within the polymer matrix. Effect of clay content was assessed on the particle size and polymerization rate for both kinds of initiators. Reduction of particle size (nearly 100 nm) and enhancement of polymerization rate (30% and 10% for formulation with KPS and AIBN respectively) was observed by adding clay material to the blank recipe. Morphology of the particles was investigated by SEM and TEM. Formation of armored latex particles (covered particles with clay layers) with approximately 200 nm in diameter was proved via these micrographs. Furthermore, exfoliated structure of nanocomposites was revealed by XRD for sample containing water soluble initiator (ionic initiator) and oil soluble initiator. Impress of Cloisite Na+structure on Tg of synthesized copolymer (soap free systems) was investigated by DSC as large changes was observed (approximately 10-15 °C). Effect of Tg on film formation of latexes was also evaluated. پرونده مقاله -
دسترسی آزاد مقاله
93 - Metallurgical Aspects of the Spinning Process in Metallic Liners
S. M. J Hoseini H Ghayour A. S Golazani M. K Asgarani I EbrahimzadehSpinning is one of the novel and unique processes in metal forming for the production of cylindrical and conical thin-walled parts with precise tolerances, good surface smoothness and suitable mechanical properties. This process includes conventional spinning, shear for چکیده کاملSpinning is one of the novel and unique processes in metal forming for the production of cylindrical and conical thin-walled parts with precise tolerances, good surface smoothness and suitable mechanical properties. This process includes conventional spinning, shear forming and flow forming. Metallurgical investigation is great importance in this process. The microstructure obtained from the spinning specimens, especially the shear forming and flow-forming, shows that the grains and the impurity particles are elongated in the direction of the main axis and are also stretched in the circumferential direction. This change in grain size on the roller side was larger than on the mandrel side. Fragmentation of coarse and brittle particles has also been observed. Also, due to the amount of strain and forces applied, the grain size decreases and as a result, the strength increases. The texture of the spinning parts has also changed. As the thickness decreases, the orientation of the grains and textures increases and the large angle boundaries increase پرونده مقاله -
دسترسی آزاد مقاله
94 - The Effect of the Timing of Form-Focused Instruction on the Development of Iranian Tourism and Hotel Management Students’ Explicit Knowledge of Grammar
Shiva Maleki Davood GhahramaniThe purpose of the present study was to examine the effect of teaching grammar explicitly on Iranian tourism and hotel management students’ grammar knowledge. The 65 Iranian tourism and hotel management students who participated in this study were homogenized base چکیده کاملThe purpose of the present study was to examine the effect of teaching grammar explicitly on Iranian tourism and hotel management students’ grammar knowledge. The 65 Iranian tourism and hotel management students who participated in this study were homogenized based on the Nelson proficiency test, so 51 tourism and hotel management students were selected as the main participants. They were divided into three experimental groups, which were called the "integrated FFI group," "pre-task FFI group," and "post-task FFI group." The learners' scores were compared using ANCOVA to analyze the data. The learners were pretested using the error correction test to assess their explicit grammar knowledge. After the treatment sessions, learners were post-tested using the error correction test to check the efficacy of the timing of form-focused instruction on the development of explicit knowledge of grammar. Based on the obtained results, it was found that there is a significant difference between the effects of integrated FFI, pre-task FFI, and post-task FFI on the explicit knowledge of the grammar of tourism and hotel management students. پرونده مقاله -
دسترسی آزاد مقاله
95 - أسالیب الکلام السردی فی أدب المقاومة الفلسطینی روایة "باب الساحة" أنموذجاً
کبری روشن‎فکر نعیمة براندوجی خلیل بروینی فرامرز میرزاییتتناول أسالیب سرد الروایة العلاقةَ القائمة بین الراوی والشخصیات فتعتبر أداةً هامةً لنقل أحادیث شخصیات الروایة وأفکارها الی المتلقی والتی یدخل القاریء من خلالها جوَّ الروایة؛ تنقسم هذه الأسالیب حسب سلطة الروای أو شخصیات الروایة إلی خمسة أنماط وهی الأسلوب المباشر، غیرالمب چکیده کاملتتناول أسالیب سرد الروایة العلاقةَ القائمة بین الراوی والشخصیات فتعتبر أداةً هامةً لنقل أحادیث شخصیات الروایة وأفکارها الی المتلقی والتی یدخل القاریء من خلالها جوَّ الروایة؛ تنقسم هذه الأسالیب حسب سلطة الروای أو شخصیات الروایة إلی خمسة أنماط وهی الأسلوب المباشر، غیرالمباشر، والحر المباشر، والحر غیر المباشر والتقریر السردی. یقوم هذا المقال فی ضوء منهج وصفیٍّ تحلیلیّ وتقدیم إحصائیّة شاملة من أقوال الشخصیات بدراسة أسالیب المحاکاة فی أحادیث روایة "باب الساحة" لسحر خلیفة (1990م). تدلّ نتائج البحث علی أنَّ السارد قد استخدم جمیع أسالیب السرد والمحاکاة لتصویر ظروف المجتمع الفلسطینیّ والمشاکل العالقة بالنساء هناک فی السنوات الأولی من الانتفاضة لکنَّه یسیطر علی الروایة الأسلوب المباشر، والتقریر السردی، والحر المباشر کإطار للسرد الروائی؛ فیتیح السارد للشخصیات باستخدام هذه الأسالیب فرصة الاتصال المباشر بالقاریء والاطلاع علی اضطراباته الفکریة السیاسیة الثقافیة الاجتماعیّة؛ فتوظیف هذه الأسالیب للسرد الروائی یساعد السارد فی تصویر مختلف آفاق الحیاة والمشاکل العالقة بالنساء الفلسطینیات. پرونده مقاله -
دسترسی آزاد مقاله
96 - سنتز آرایه خطی از آنتنها با روش دوجمله ای نیوتن برای کاهش سطح گلبرگهای جانبی پرتو
مریم رحیمی کازرونی قاسم رواییآرایه های آنتنی بدلیل داشتن قابلیتهای لازم برای شکل دهی پرتو، هدایت پرتو، جهت دارندگی و بهره بالا یکی از مستعد ترین نوع آنتنها در این زمینه می باشند. بطور کلی در سنتز پترن آرایه ای از آنتنها توجه اصلی به تعیین تحریک آنتنها برای تولید یک پترن دلخواه معطوف می گردد. می توا چکیده کاملآرایه های آنتنی بدلیل داشتن قابلیتهای لازم برای شکل دهی پرتو، هدایت پرتو، جهت دارندگی و بهره بالا یکی از مستعد ترین نوع آنتنها در این زمینه می باشند. بطور کلی در سنتز پترن آرایه ای از آنتنها توجه اصلی به تعیین تحریک آنتنها برای تولید یک پترن دلخواه معطوف می گردد. می توان مسئله تعیین تحریک آنتنهای موجود در آرایه را به سه دسته اصلی تقسیم کرد. اولین مسئله سنتز پترن آنتن، تولید پترنی است که صفرهای آن در جهات مورد نظر قرار گیرد. دومین مسئله تولید پترنی با پهنای پرتوی بسیار باریک می باشد که سطح گلبرگهای جانبی آن نسبت به گلبرگ اصلی بسیار پایین باشد. سومین مسئله تولید یک پرتوی شکل یافته می باشد. در این مقاله سنتز پترن یک آرایه ای از آنتنها با پرتوی بسیار باریک و سطح گلبرگهای جانبی بسیار پایین نسبت به گلبرگ اصلی مورد بحث قرار گرفته است. چندین روش مختلف برای انجام این کار در مقالات و کتابهای مربوط به آنتن وجود دارد. یکی از این روشها روش دوجمله ای نیوتن می باشد. در این مقاله با استفاده ازدوجمله ای نیوتن سنتز پترن یک آرایه خطی جهت تولید پرتوی بسیار باریک و کاهش سطح گلبرگهای جانبی انجام می شود. پرونده مقاله -
دسترسی آزاد مقاله
97 - Numerical Simulation of Fluid-Structure Interaction and its Application in Impact of Low-Velocity Projectiles with Water Surface
N. Khazraiyan N. Dashtian Gerami M. DamircheliIn this article, finite element method and ALE formulation were used to numerically simulate impact of low-velocity specific projectiles with water surface. For the simulation, Ls-Dyna finite element code was used. Material models which were used to express behavior of چکیده کاملIn this article, finite element method and ALE formulation were used to numerically simulate impact of low-velocity specific projectiles with water surface. For the simulation, Ls-Dyna finite element code was used. Material models which were used to express behavior of air and water included Null material model. For the projectile, plastic-kinematics material model was applied. Mie-Gruneisen equation of state was also attributed to air and water. First, the results were validated by analyzing the impact of metallic cylinder with water surface and then impact of a mine as a low-velocity projectile was simulated. Among major outputs were force and pressure applied to the projectile, velocity and acceleration variations upon entering water, stress-strain variations and variations of water surface in various steps of analysis. The results showed that impact of structure with fluid can be modeled using finite element model with high accuracy in terms of quality and quantity. پرونده مقاله -
دسترسی آزاد مقاله
98 - Trajectory Tracking Control of a Novel Planner Continuum Robot
Seyed Shoja Amini ali keymasi khalajiResearchers have a special fondness for continuum robots (CRs) due to their various applications. CRs have been modeled in different ways. One of these methods is called lumped model. Although the lumped modeling of CRs needs multiple degrees of freedom, researchers hav چکیده کاملResearchers have a special fondness for continuum robots (CRs) due to their various applications. CRs have been modeled in different ways. One of these methods is called lumped model. Although the lumped modeling of CRs needs multiple degrees of freedom, researchers have considered only a few degrees of freedom. But considering such structures led to some issues in the accuracy of the controller. Therefore, in this paper, the dynamic modeling of a CR which is based on the lumped model is developed in a general form. Additionally, a control strategy based on sliding mode back-stepping control is proposed after introducing the first and second Lyapunov functions for stability proof. Moreover, a new function in the control law is used to avoid chattering phenomena. The proposed controller can reduce the settling time, which is one of the most important factors in controlling such robots. To demonstrate the efficiency of the proposed method, three different case studies are conducted for a planar 8-DOF continuum manipulator and the simulations are compared with the feedback linearization method (FL). The simulations show the effectiveness of the proposed method for controlling the continuum robot. پرونده مقاله -
دسترسی آزاد مقاله
99 - Process Parameters Optimization in Gas Blow Forming of Pin-type Metal Bipolar Plates using Taguchi and Finite Element Methods
M. Moradian A. Doniavi V. Modanloo V. AlimirzalooMetal bipolar plates are the most important parts of the fuel cells and recently these plates are used instead of graphite ones.In the present study, gas blow forming of a pin-type aluminum 5083 bipolar plate has been studied. After the simulation of the process, the FE چکیده کاملMetal bipolar plates are the most important parts of the fuel cells and recently these plates are used instead of graphite ones.In the present study, gas blow forming of a pin-type aluminum 5083 bipolar plate has been studied. After the simulation of the process, the FE model has been validated using experimental results. Then, the effects of parameters including maximum pressure of the gas, pressurization profile and corner radius of the pin on thinning ratio and forming depth of final part have been investigated. Nine experiments were designed using the Taguchi L9 orthogonal array and the experiments were performed using the FE model. The signal to noise (S/N) ratio and the analysis of variance (ANOVA) techniques were carried out to determine the effective parameters and the contribution of each parameter. The maximum pressure of 1.2 MPa, SP2 pressurization profile and corner radius of 0.2 mm lead to the minimum thinning ratio. Also, it was found that to maximize the forming depth, the maximum pressure of 2 MPa, SP1 pressurization profile and corner radius of 0.3 mm should be selected. Also, ANOVA analysis showed that the most significant parameters on thinning ratio and forming depth are corner radius and maximum pressure, respectively. پرونده مقاله -
دسترسی آزاد مقاله
100 - Statistical Analysis and Optimization of Factors Affecting the Spring-back Phenomenon in UVaSPIF Process Using Response Surface Methodology
M. Vahdati R. A. Mahdavinejad S. AminiUltrasonic Vibration assisted Single Point Incremental Forming (UVaSPIF) process is an attractive and adaptive method in which a sheet metal is gradually and locally formed by a vibrating hemispherical-head tool. The ultrasonic excitation of forming tool reduces the ave چکیده کاملUltrasonic Vibration assisted Single Point Incremental Forming (UVaSPIF) process is an attractive and adaptive method in which a sheet metal is gradually and locally formed by a vibrating hemispherical-head tool. The ultrasonic excitation of forming tool reduces the average of vertical component of forming force and spring-back rate of the formed sample. The spring-back phenomenon is one of the most important geometrical errors in SPIF process, which appear in the formed sample after the process execution. In the present article, a statistical analysis and optimization of effective factors on this phenomenon is performed in the UVaSPIF process based on DOE (Design of Experiments) principles. For this purpose, RSM (Response Surface Methodology) is selected as the experiment design technique. The controllable factors such as vertical step size, sheet thickness, tool diameter, wall inclination angle, and feed rate is specified as input variables of the process. The obtained results from ANOVA (Analysis of Variance) and regression analysis of experimental data, confirm the accuracy of mathematical model. Furthermore, it is shown that the linear, quadratic, and interactional terms of the variables are effective on the spring-back phenomenon. To optimize the spring-back phenomenon, the finest conditions of the experiment are determined using desirability method, and statistical optimization is subsequently verified by conducting the confirmation test. پرونده مقاله -
دسترسی آزاد مقاله
101 - Numerical Analysis of Circular Pre-notched U-Channel Section Distortions in Cold Roll-Forming Process
S. Sattar S. Mazdak E. SharifiCold roll forming is a process in which a metal sheet gets a desired section form by passing through a series of rotating rollers. Predicting the amount of the distortion in pre-notched cold formed sections still remains challenging in cold roll forming industry, depend چکیده کاملCold roll forming is a process in which a metal sheet gets a desired section form by passing through a series of rotating rollers. Predicting the amount of the distortion in pre-notched cold formed sections still remains challenging in cold roll forming industry, depending on the shape and position of the holes. This study investigates the influence of variation of the design parameters on the defects of the U-channel sections produced by cold roll forming process with circular pre-notches. To analyze the important parameters in deforming the circular holes during the cold roll forming of U-channel sections, a three-dimensional finite element model has been taken into account. A range of variation for design factors in forming the U-channel sections with pre-notches is set, including radius of circular holes, distance between the holes and the flange edge, hole spacing, sheet thickness, and type of material. Furthermore, using the response surface methodology, a set of tests are designed and modeled employing Finite Element analysis. Afterward, a set of output parameters such as edge buckling, the wave of the holes, the change in hole size, hole spacing, and the distance between the holes and the edge of the flange, are considered. Utilizing Analyses Of Variance (ANOVA), the accuracy of the linear regression models was conducted in this study. The accuracy of the simulated models is examined by comparing the analysis results with the experimental results. Finally, the effect of the important parameters on the defects of the product has been extracted in both the statistical form as well as mathematical functions applying response surface methodology. The results show that as the radius of the hole increases, edge buckling increases. The increase of the hole radius increases the edge wave on the holes. The hole width of the product is bigger and the hole length is smaller than the nominal measuring. پرونده مقاله -
دسترسی آزاد مقاله
102 - Experimental Investigation of Effective Parameters on a New Incremental Tube Bulging Method Using Rotary Tool
S. M. H. Seyedkashi S. J. Hashemi Ghiri F. RahmaniNowadays, dieless and flexible sheet forming methods are gaining much interest in prototyping and low production. In this research, a new method is developed to change the cross-sectional area of metal tubes in a longitudinal direction without using special dies. This t چکیده کاملNowadays, dieless and flexible sheet forming methods are gaining much interest in prototyping and low production. In this research, a new method is developed to change the cross-sectional area of metal tubes in a longitudinal direction without using special dies. This technique is based on the force applied by a rotary tool to the inside/outside surface wall of a tube. The forming tool is mounted on a CNC milling machine and moves spirally with a specific pitch. In order to study the effects of process parameters on the product quality, a full factorial design of experiments was designed and performed. The input parameters were the feeding depth, forming pitch and tool velocity. Three responses including roughness, minimum thickness and production time were precisely measured for this purpose. The results showed that surface quality and minimum thickness is reduced with increasing the forming pitch and feeding depth. Tool rotational velocity does not have a significant effect on the forming parameters except for production time. Using a multi-objective response optimization, forming pitch of 0.25 mm, feeding depth of 1.25 mm and velocity of 800 mm/min were found to be the best configuration. پرونده مقاله -
دسترسی آزاد مقاله
103 - Experimental Investigation of Incremental Forming Process of Bilayer Hybrid Brass/St13 Sheets
R. Ashouri H. ShahrajabianIn this study, the incremental forming of two layers’ brass/St13 sheets through the single-point process was experimentally examined. To investigate the formability of sheet in this process, the desired shape was designed through solid works software, and then sur چکیده کاملIn this study, the incremental forming of two layers’ brass/St13 sheets through the single-point process was experimentally examined. To investigate the formability of sheet in this process, the desired shape was designed through solid works software, and then surf cam application was used to observe tool motion and extraction of CNC program. G-codes were transferred to the CNC machine and the incremental bilayer sheets forming process was carried out in two different modes, that is, in one case, the brass sheet was placed on top and the steel sheet below, and in the other case they exchanged places. Afterwards, the effects of parameters such as forming tool diameter, vertical step size, and feed rate at three levels on fracture height, fracture angle, and strain were studied. In order to minimize the experiments, the experiment design based on response surface method (RSM) was employed. The results indicated that by increasing the tool diameter, vertical step, feed rate, the fracture angle, and fracture height decreased. The maximum fracture height and angle were estimated 46.5 mm and 71.44 degree, respectively, with tool diameter of 10 mm, speed of 1800 mm/min, and vertical step size of 0.25 mm. According to strain measurement results, steel sheets could bear higher strain rate than brass sheets, and in the case that the steel sheet was on top, the fracture height of bilayer sheet increased. The maximum strain of 0.72 was obtained in SB mode with tool diameter of 10 mm, feed rate of 1000 mm/min and vertical step of 0. 5. پرونده مقاله -
دسترسی آزاد مقاله
104 - The Impact of Die Corner Radius and Friction Coefficient on Bulge Forming of T-Shaped Copper Tubes using Finite-Element Method and Experimental Analysis
M. Ahmadpour Omid GhahraeiIn this paper, the effects of various parameters on the process of T-shaped copper tube bulge forming have been investigated. This evaluation is based on the properties of the copper tubes, properties of polyurethane rod and practical conditions of a bulge forming proce چکیده کاملIn this paper, the effects of various parameters on the process of T-shaped copper tube bulge forming have been investigated. This evaluation is based on the properties of the copper tubes, properties of polyurethane rod and practical conditions of a bulge forming process such as the friction coefficient between die and tube, between tube and rod, boundary conditions and their constraints. The effect of each condition on a T-shaped copper tube has been explicitly simulated using the Abaqus software. The experimental results have been validated by conducting a series of experiments. After simulating the process, the effect of other parameters such as die corner radius, friction coefficient, thickness of the tube and counterpoise can be evaluated and used in practical experiments. Then, the simulation results have been compared with the obtained results from the experiments. Once the accuracy of the simulation results has been endorsed, the optimal values of different parameters have been determined using simulations. The optimal values for die corner radius, friction coefficient and counterpoise are 5 mm, 0.05 and 200 N, respectively. The findings shows the positive effect of utilization of optimal value for die corner radius, optimal value for counterpoise and lubricate on optimize forming process properties. پرونده مقاله -
دسترسی آزاد مقاله
105 - Investigating the Effect of Rotation Speed and Ultrasonic Vibrations in the Incremental Forming Process
Saeed Amini Farshad Nazari Mohammad Baraheni Amir Hossein GhasemiIncremental forming is one of the forming methods that is considered because of no need to specific die, especially for rapid prototyping. In this study, the incremental forming process is carried out by using a rotating tool and assisted ultrasonic vibration. Purpose o چکیده کاملIncremental forming is one of the forming methods that is considered because of no need to specific die, especially for rapid prototyping. In this study, the incremental forming process is carried out by using a rotating tool and assisted ultrasonic vibration. Purpose of this research is to investigate the effect of rotation speed and ultrasonic vibrations in the incremental forming process. According to the obtained results, mean and maximum values of forming force reduced by using a rotating tool and applying ultrasonic vibrations. The results of surface roughness tests demonstrated that by increasing rotational speed, the surface roughness improved 44% and applying ultrasonic vibrations with tool rotation can reduce surface roughness about 74%. Applying ultrasonic vibrations lead to increase micro-hardness up to 84%, but, by increasing rotational speed, surface hardness slightly reduces. Results of straight groove test determined ultrasonic vibrations with the rotating tool can increase stretching limit up to 41.79% due to the affect on the sheet plasticity behavior. پرونده مقاله -
دسترسی آزاد مقاله
106 - Incremental Forming of Polymeric Sheet Printed by Fused Deposition Modeling
Saeid Esmaeili Mohsen Loh-Mousavi Sayyed Ali EftekhariSingle point incremental forming (SPIF) and fuseddeposition modeling 3D printing (FDM) are two methods of rapid prototyping. Each method has its own pros and cons. using SPIF method can provide an accurate forming process to shape sheets fabricated by 3D printing with t چکیده کاملSingle point incremental forming (SPIF) and fuseddeposition modeling 3D printing (FDM) are two methods of rapid prototyping. Each method has its own pros and cons. using SPIF method can provide an accurate forming process to shape sheets fabricated by 3D printing with their special characteristics. In this study, single-point incremental forming of Poly Lactic Acid (PLA) sheets fabricated by FDM 3D printer was investigated by experiments. The formability process was evaluated by two different experiments. In the first experiment, a lubricant was used at ambient temperature and SPIF was investigated and for the second experiment hot air and lubrication were employed to achieve better formability. In addition, the effects of sheet thickness and strategy of layering of printed sheets by FDM were also studied on SPIF formability. The results showed that the incremental forming of printed PLA sheets in hot air is a more successful state to produce dome shapes parts and ruptures are less and this forming method can be used for some applications such as making partial curve of skull as a medicine solution in surgeries. Also, it was shown that the best layering strategy to print the PLA sheets used for better forming of SPIF is triangular pattern strategy against with rectangular strategy. It was found that thickness of 2mm printed sheet has better formability and less rupture versus 3mm of thickness. پرونده مقاله -
دسترسی آزاد مقاله
107 - Impact of Loading Rate in Hot Tube Gas Forming of AA6063
Mastafa Rajaee Seyed Jamal Hosseinipour Hamed Jamshidi AvalIn this paper, the manufacturing of a cylindrical AA6063 step tube via hot metal gas forming (HMGF) process is studied both experimentally and numerically. The goal is to investigate the effect of loading rate on the specimen profile and thickness distribution. ABAQUS f چکیده کاملIn this paper, the manufacturing of a cylindrical AA6063 step tube via hot metal gas forming (HMGF) process is studied both experimentally and numerically. The goal is to investigate the effect of loading rate on the specimen profile and thickness distribution. ABAQUS finite element software is used for the numerical simulation. Experiments were carried out at 580°C in two conditions; first, without axial feeding and then with an axial feeding of 14 mm at a maximum pressure of 0.5 MPa. The studied parameters are the pressure rate and the axial feeding rate. The results show that in the non-axial feeding mode, the thickness distribution in the die cavity region was non-uniform and a rupture occurred at a pressure of 0.6 MPa. The reduction of the pressure rate has no significant effect on the rupture pressure. In the case of axial feeding, by choosing the pressure rate of 0.001 MPa/s and the axial feeding rate of 0.1 mm/s, wrinkling has been created in the specimens. However, at a pressure rate of 0.005 MPa/s and an axial feeding rate of 0.02 mm/s, the specimens are raptured. Under low pressure rate of 0.001 MPa/s and low axial feeding rate of 0.02 mm/s, the thickness in the die cavity area has decreased. A suitable die filling and thickness distribution are obtained at a pressure rate of 0.005 MPa/s and axial feeding rate of 0.1 mm/s. پرونده مقاله -
دسترسی آزاد مقاله
108 - Experimental Investigation of the Formability Improvement of Brass 260 and Al5182-O in Various Strain Rate using Hydrodynamic and Electrohydraulic Forming Methods
َAmin Ashrafi Tafreshi Mehdi ZohoorStudying the formability of the sheet metals have been the subject of many researches during the last decades. A number of experimental and numerical approaches were implemented to derive the formability diagrams of different materials. In this study, the formability of چکیده کاملStudying the formability of the sheet metals have been the subject of many researches during the last decades. A number of experimental and numerical approaches were implemented to derive the formability diagrams of different materials. In this study, the formability of two mostly used alloys, Brass 260 and Al5182-O as low and moderate formability materials, were investigated respectively. The forming limit diagrams of both materials were determined by using three experimental approaches such as Nakazima quasi-static as low strain rate method, hydrodynamic forming method as the moderate strain rate method and Electrohydraulic Forming process as high strain rate method. Three experimental results of forming limit diagram with the various strain rate were compared graphically. The results have shown that both of the materials could withstand higher strains when the electrohydraulic forming method was applied on the specimens and consequently, the forming limit diagrams for Brass 260 and Al5182-O shift up by 11% and 14%, respectively. In addition, it was concluded that the hydrodynamic forming method improves the formability of the materials by 4% and 6% for Brass 260 and Al5182-O, respectively. The outcomes of this study indicated that the formability of both materials was improved significantly by increasing the strain rate. پرونده مقاله -
دسترسی آزاد مقاله
109 - Numerical Simulation of Ultrasonic Assisted Indentation Tube Forming
Saeid Dashti Masih Paknejad Amir Abdullah Abbas PakIndentation forming is an internal tube forming process in which a mandrel with a diameter slightly larger than that of the tube is pressed inside the tube and in so doing, creates the internal profile. Forming forces have a significant effect on the spring back, residu چکیده کاملIndentation forming is an internal tube forming process in which a mandrel with a diameter slightly larger than that of the tube is pressed inside the tube and in so doing, creates the internal profile. Forming forces have a significant effect on the spring back, residual stress, quality of the inner surface, quality of tube dimensions, and tool wear. In this study, the forming process of CK45 steel tube by carbide tungsten tool in the presence of ultrasonic vibration has been simulated and the effect of ultrasonic on the forming mechanism has been investigated by introducing two regimes according to the forming conditions. The effects of tool feed-speed and amplitude of vibration on forming force reduction have been investigated. According to the simulation results, the main reason for the force reduction in the presence of longitudinal tube ultrasonic vibration is the intermittent phenomenon which is the continuous or impulsive regime. The critical amplitude which determines the borderline of continuous and impulsive regimes is obtained 38µm by the simulation of the process. The maximum force reduction obtained in continuous regime is 64.2% at the critical amplitude. The simulation results are consistent well with the previous experimental data. پرونده مقاله -
دسترسی آزاد مقاله
110 - Fabrication of a Complicated Specimen with Two Point Incremental Forming Process
Mehdi Safari Jalal JoudakiManufacturing of complicated industrial components is one of the main challenges for mechanical engineers in sheet metal forming processes. Incremental sheet metal forming (ISMF) is used widely for forming complicated shapes by a single rotating tool. This paper examine چکیده کاملManufacturing of complicated industrial components is one of the main challenges for mechanical engineers in sheet metal forming processes. Incremental sheet metal forming (ISMF) is used widely for forming complicated shapes by a single rotating tool. This paper examines the experimental investigation of two-point incremental forming of a complicated specimen made of AA3105 aluminum alloy. The part shape consists of positive and negative cavities and the shape complexity limits the manufacturing process to two-point incremental forming process (TPIF). In addition, the effects of selected process parameters such as forming depth in each increment of process, tool rotational speed and various forming patterns on thickness distribution and thinning percentage of specimen are investigated. The forming pattern includes the sequence of forming the cavities (Internal/External pattern and External/Internal pattern). The main finding of the study can be expressed that the thinning ratio of manufactured specimen is increased with an increase in the forming depth in each increment of TPIF. Also, the higher rotational speed leads to a reduction in the thinning of the fabricated specimen. The results prove that the use of Internal/External forming pattern leads to reduction in the thinning of the manufactured specimen. پرونده مقاله -
دسترسی آزاد مقاله
111 - Hole-flanging of 2205 Dual-Phase Steel using Incremental Forming Process
Amir H. Roohi Seyed Jalal HashemiIn this study, hole-flanging of a dual-phase steel sheet is conducted using incremental forming approach. In this process, a hole with a certain diameter is pre-cut on a sheet. Then, this hole is transformed into a cylindrical flange shapes, by contacting the forming to چکیده کاملIn this study, hole-flanging of a dual-phase steel sheet is conducted using incremental forming approach. In this process, a hole with a certain diameter is pre-cut on a sheet. Then, this hole is transformed into a cylindrical flange shapes, by contacting the forming tool with the hole edges. During the process, the tool is moved in spiral paths. The parameters affecting the height and thickness distribution of the formed flange include axial step, radial step, and rotational speed of the tool. Results show that the axial step has the most significant effect on the process, among other parameters; when the axial step is tripled, the flange thickness increases by 19%. On the other hand, a decrease in the radial step decreases the flange edge thickness. When the radial step is tripled, the flange thickness increases by 8%, while the flange height decreases about 3%. پرونده مقاله -
دسترسی آزاد مقاله
112 - Experimental Analysis of Effective Parameters on the Bowing Defect of Symmetrical U-Section in Roll Forming Production
Amin Poursafar Saeid Saberi Rasoul Tarkesh Esfahani Meisam Vahabi Javad Jafari FesharakiThe roll forming process plays a critical role in producing various sections used in industries. Also, the quality of these products is strongly affected by the thickness of the strip, the distance between stands, the section web, the flower pattern, and the plastic ani چکیده کاملThe roll forming process plays a critical role in producing various sections used in industries. Also, the quality of these products is strongly affected by the thickness of the strip, the distance between stands, the section web, the flower pattern, and the plastic anisotropy. Therefore, the influences of practical factors on the bowing defect of the symmetrical U-section are experimentally and mathematically characterized in the present research. The investigated material is DC03 (1.0347) steel. Different prediction models such as linear and non-linear model based on the general full-factorial design of experiment are used to predict the effect of following factors on the bowing defect. Accuracy of the analytical model was verified by comparing the output results with the practical data. Results show that the strip thickness of investigated material, the flower pattern, and the section web have the most significant effect on the bowing defect. Also, the anisotropic properties of the investigated material and the inter distance have the minor impact on the bowing defect, but the effect of material with considering the anisotropic properties on increasing the accuracy of process simulation results is very impressive and increases the accuracy of simulation results from 84% to 91%. Finally, the predicted bowing defect using the modified two-factor model was in 91% agreement with the experimental results. پرونده مقاله -
دسترسی آزاد مقاله
113 - Antihyperlipidemic activity of a unani formulation in high fat diet-induced obese murine model
Md Rafiul Haque Shahid Hussain AnsariArq zeera (AZ), a poly herbal unani formulation has been used traditionally as a remedy for reducing body fat and gastric disorder. The current study was designed to investigate the antihyperlipidemic activity of AZ against rat model of high fat diet (HFD) - induced obe چکیده کاملArq zeera (AZ), a poly herbal unani formulation has been used traditionally as a remedy for reducing body fat and gastric disorder. The current study was designed to investigate the antihyperlipidemic activity of AZ against rat model of high fat diet (HFD) - induced obesity. AZ was prepared and administered orally 7.75 ml/kg/twice a day for 4 weeks to HFD- induced obese rat. Body weight and serum biomarkers were evaluated. Stability testing of AZ was also carried out. At the end of study, HFD significantly (p < 0.001) increased body weight, cholesterol, triglycerides, pancreatic lipase activity and malondialdehyde (MDA) levels as compared to normal diet control group. AZ-treated rats significantly (p < 0.001) reduced body weights, cholesterol, triglycerides, pancreatic lipase activity and MDA levels as compared to HFD control. These results suggest that AZ has an antihyperlipidemic action against HFD-induced obesity in rats, possibly through lipid lowering action, reduction of intestinal absorption of dietary fat, and increased antioxidant defense. پرونده مقاله -
دسترسی آزاد مقاله
114 - Investigation of inhibitory properties of triphenyl-LasR enzyme involved in the quorum sensing of <i>Pseudomonas aeruginosa</i> by molecular modeling
Mahshad Shahriari Faezeh Nourmandipour Samira Norouzi Samad Nejad EbrahimiQuorum sensing (QS) is a bacterial communication mechanism that regulates the production of many pathogenic factors, including the formation of pigments and the ability to form biofilms that are essential for chronic infections. For discovering new inhibitors on the for چکیده کاملQuorum sensing (QS) is a bacterial communication mechanism that regulates the production of many pathogenic factors, including the formation of pigments and the ability to form biofilms that are essential for chronic infections. For discovering new inhibitors on the formation of biofilm formation, over 700 synthetic and natural compounds have been virtually screened against the triphenyl-LasR enzyme involved in Pseudomonas aeruginosa’s QS system. The 3D-QSAR studies revealed the relationship between the quantitative structure of compounds and their activity. The drug-like properties of compounds and effective pharmacophore features on the ligand interaction with protein were investigated by ADME and E-pharmacophore analysis. According to the obtained results, we identified compound with PubChem ID 118732838 with the glide score of -12.34 kcal/mol and oral absorption of 58.75% as the potential compound for inhibiting triphenyl-LasR protein. The study outcomes can help us to identify new drugs to inhibit biofilm formation and decrease bacterial resistance. پرونده مقاله -
دسترسی آزاد مقاله
115 - A Contrastive Analysis of English and Persian Native Speakers' Use of Gambits
Azizeh Chalak Zahra NorouziConversations contain spontaneous use of routine formulas which lets speaker sinteract with each other to express opinions. Gambits, as one of these formulas, act as an opening remark and help speakers to maintain the smooth flow of an everyday conversation. The lack of چکیده کاملConversations contain spontaneous use of routine formulas which lets speaker sinteract with each other to express opinions. Gambits, as one of these formulas, act as an opening remark and help speakers to maintain the smooth flow of an everyday conversation. The lack of mastery of using gambits in maintaining the conversation leads to breakdowns in speaking. This paper aimedat comparingthe use of different categories of gambitsby native speakers of English and Persian. Toachieve this end, a corpus of 40 hours from Persian Native Speakers (PNSs) and English Native Speakers (ENSs) with an equal number of participants was selected through recordings of conversations from different TV Channels. Following the literature, the frequency of gambit tokens was counted and their functions were classified. Chi-square test revealed significant differences between PNSs and ENSs regarding the occurrences of gambit categories. The findings of this study can have implications for language learners and practitioners in the field. The present research demonstrates to language learners the need for learning gambit expressions as elements to improve the quality of their speaking and also to use the language in meaningful interaction with others. پرونده مقاله -
دسترسی آزاد مقاله
116 - English Comparative Forms in Iranian Textbooks Compared to Textbooks Developed by Native Material Developers
Ghazaleh Shafeniya AhmadReza LotfiIn the introductory stages of language learning, students are exposed to parative forms explicitly taught in their textbooks. As Knoch (2004) mthis is accomplished by teaching the comparative form of the adjective generally directly followed by a than clause. This stud چکیده کاملIn the introductory stages of language learning, students are exposed to parative forms explicitly taught in their textbooks. As Knoch (2004) mthis is accomplished by teaching the comparative form of the adjective generally directly followed by a than clause. This study aimed to compare between native and nonnative material developers with regard to the coverage of comparative forms. In doing so, two corpora of high school changes were developed and juxtaposed. The data were gathered books and converting them into computerized forms. The data by the frequency percentages of the forms and further examined and compared as well. The results revealed that there was a significant difference corpora with regard to the coverage of comparative forms. پرونده مقاله -
دسترسی آزاد مقاله
117 - Languaging in L1 as a Mediating Factor in EFL Listening Skill Enhancement: Private vs. Collaborative Form
Morvarid Lavasani Farnaz Latif Amirhosein RahimiLanguaging is considered as the process of making knowledge through the use of language for explaining the concepts. Teaching listening strategies in this study provided students with moments of languaging in L1 that subsequently allowed them to transfer certain strateg چکیده کاملLanguaging is considered as the process of making knowledge through the use of language for explaining the concepts. Teaching listening strategies in this study provided students with moments of languaging in L1 that subsequently allowed them to transfer certain strategies to listening comprehension. This study investigated the effects of different modes of languaging on the listening performance of EFL learners. It draws on sociocultural theories and languaging. Initially, an Oxford Placement Test was administered to 62 EFL intermediate learners to ensure homogeneity. Then, the participants were assigned to two groups, collaborative and private mode of languaging. Before applying treatment, the participants were also given a sample of (PET) listening test as a pre-test. During treatment sessions, the listening tasks were practiced by collaborative mode of languaging in one group, while in the second group tasks were accomplished by private form within 10 sessions. At the end of treatment, a post-test (PET) was administered. Consequently, the mean scores of both groups on the post-test led to the rejection of the null hypothesis implying that the learners in the collaborative languaging group and private languaging group significantly improved in terms of listening performance. However, the private form of languaging outperformed the collaborative one. پرونده مقاله -
دسترسی آزاد مقاله
118 - Effects of First Language Metalinguistic Comments on Task-based Instruction: Durable Gains of Third Person /-s/ by Adult Iranian EFL Learners
Soheil Rahimi Moussa Ahmadian Majid Amerian Hamid Reza Dolat AbadiThis study investigated the effect of first language (L1) metalinguistic comments on Iranian EFL learners’ acquisition of third person /-s/ as measured by the learners’ performance on a grammaticality judgment test. Accordingly, two intact university classes چکیده کاملThis study investigated the effect of first language (L1) metalinguistic comments on Iranian EFL learners’ acquisition of third person /-s/ as measured by the learners’ performance on a grammaticality judgment test. Accordingly, two intact university classes- randomly assigned to experimental and comparison groups- were homogenized based on their scores on language proficiency and grammatically judgment tests. During 6 hours of task-based instructions, the experimental group was treated by L1 metalinguistic comments and the comparison group through L2 metalinguistic comments. Using ANCOVA and t-test to compare the groups’ scores, the results indicated that although the mean accuracy scores of both groups were improved on the immediate posttest, the experimental group outperformed the comparison group on the delayed posttest.It can be postulated that L1 metalinguistic comments lead to more durable gains than L2 metalinguistic comments in EFL classrooms. The findings suggest that L1 use may aid language learners to become more cognitively conscious of L2 grammar features. پرونده مقاله -
دسترسی آزاد مقاله
119 - A Qualitative Study of Experience in Forming Teachers’ Cognition on the Concept of Language Noticing
Zahra Zargaran Mohammad Khatib Parviz Birjandi Masoud Yazdani MoghadamAwareness, in language learning, is a focused area of debate encompassing many different aspects of language teaching research, especially that of grammar. Although the learner’s awareness has been widely taken into account, noticing, which embraces the meaning of چکیده کاملAwareness, in language learning, is a focused area of debate encompassing many different aspects of language teaching research, especially that of grammar. Although the learner’s awareness has been widely taken into account, noticing, which embraces the meaning of awareness, is something that lacks empirical data and literature in teacher’s cognition when it comes to second language teaching studies. Therefore, this qualitative study aimed to explore the teachers’ theoretical and practical cognition in conceptualizing and using noticing in teaching and practicing language; in addition, the congruency between teachers’ theoretical beliefs and actual practices were investigated. To this end, a total of 30 novice and experienced teachers were interviewed and the role of teaching experience as an overarching concept affecting teachers’ beliefs and performance was detected by using constant comparative analysis. Findings revealed seven conceptual themes out of the collected data as pedagogical effects, type of input, skill type, when to notice, noticing techniques, time allocation, and measurement. Then, six teachers from the same sample group were observed for possible inconsistencies in their teaching practices and their cognition about the concept. The discrepancies between the teachers’ stated beliefs and actual practices revealed that teaching experience has a relative impact on teacher’s performance. پرونده مقاله -
دسترسی آزاد مقاله
120 - علل گرایش به آموزش در خانه از نظر والدین کودکان آموزش دیده در خانه: مطالعه کیفی تجربیات والدین
کورش فتحی واجارگاه اباصلت خراسانی محمد تقی رودیآموزش در خانه عبارت است از آموزش کودکان در محیط خانه و توسط خود والدین. در این روش آموزشی، برنامههای درسی و روشهای آموزشی توسط خود والدین و کودک مشخص میشود. پژوهش حاضر، با هدف بررسی دلایل گرایش به آموزش در خانه انجام گرفت. رویکرد این پژوهش کیفی بود که در آن 9 خانواده چکیده کاملآموزش در خانه عبارت است از آموزش کودکان در محیط خانه و توسط خود والدین. در این روش آموزشی، برنامههای درسی و روشهای آموزشی توسط خود والدین و کودک مشخص میشود. پژوهش حاضر، با هدف بررسی دلایل گرایش به آموزش در خانه انجام گرفت. رویکرد این پژوهش کیفی بود که در آن 9 خانواده در شهر تهران بر اساس نمونهگیری هدفمند و به صورت روش گلوله برفی انتخاب شدند. برای گردآوری اطلاعات از روشهای مصاحبه نیمه ساختار یافته و خود شرح حال نویسی استفاده شد. روش تجزیه و تحلیل یافتهها، تحلیل محتوای متن مصاحبه و اتوبیوگرافی بوده است. یافتههای پژوهش بیانگر آن است عامل اقتصادی به عنوان عامل مؤثر در گرایش به آموزش در خانه چندان مورد توجه والدین نبوده است. پیرامون عوامل فرهنگی اجتماعی به جو رقابتی مدارس، خالی بودن جای آموزشهای اخلاقی و ارزشهای انسانی در برنامههای درسی مدارس و تجربیات آموزشی والدین و احساس مسؤولیت والدین اشاره شده است. در مورد عوامل آموزشی و پداگوژیکی گرایش به آموزش در خانه، نارضایتی از برنامههای درسی، روشهای آموزشی در مدارس و استقلال در یادگیری، توجه به علایق و نیازهای کودک، پویایی روش و فرصت آموزش متقابل در آموزش در خانه بیان شد. تمرکزگرایی و سیاست زدگی آموزشی نیز نیز به عنوان خط مشیهای سیاسی مؤثر در آموزش در خانه ذکر گردید. پرونده مقاله -
دسترسی آزاد مقاله
121 - بررسی تأثیر مدل طراحی آموزشی گانیه و بریگز بر یادگیری و یادداری و انگیزش پیشرفت تحصیلی درس علوم تجربی
راضیه برزگر خدیجه علی آبادیآموزش از اساسیترین نیازهای بشر است. بدون آموزش، هیچ جامعهای نمیتواند به بقای خود ادامه دهد. اما آموزش مؤثر و سودمند نمیتواند با کوشش و خطا صورت گیرد؛ بلکه نیازمند طرح و برنامه است. پژوهش حاضر با توجه به اهمیت و تأثیر الگوهای طراحی آموزشی به ویژه الگوی طراحی گانیه در چکیده کاملآموزش از اساسیترین نیازهای بشر است. بدون آموزش، هیچ جامعهای نمیتواند به بقای خود ادامه دهد. اما آموزش مؤثر و سودمند نمیتواند با کوشش و خطا صورت گیرد؛ بلکه نیازمند طرح و برنامه است. پژوهش حاضر با توجه به اهمیت و تأثیر الگوهای طراحی آموزشی به ویژه الگوی طراحی گانیه در حوزه فعالیتهای آموزشی انجام گرفته، هدف آن بررسی تأثیر مدل طراحی آموزشی گانیه و بریگز بر یادگیری، یادداری و انگیزش پیشرفت تحصیلی درس علوم تجربی دانشآموزان سال سوم راهنمایی است. جامعه آماری پژوهش، همه دانشآموزان دختر پایه سوم راهنمایی شهراهر در سال تحصیلی 91 ـ 1390 بود و از این جامعه به طور تصادفی خوشهای چند مرحلهای، تعداد دو کلاس 25 نفره انتخاب و یک کلاس به عنوان گروه آزمایش (25 نفر) و کلاس دیگر به عنوان گروه کنترل (25 نفر) در نظر گرفته شد که در مجموع 50 نفر به عنوان نمونه انتخاب شدند. به منظور سنجش آزمودنیها، آزمون یادگیری و یادداری و پرسشنامه انگیزش پیشرفت تحصیلی (ISM) (Inventory of School Motivation ) مورد استفاده قرار گرفت. ضریب پایایی آزمون یادگیری با استفاده از روش دونیمه کردن 83/0 و ضریب پایایی پرسشنامه انگیزش پیشرفت تحصیلی (ISM) با روش آلفای کرانباخ 81/0 بود. در این پژوهش، گروه آزمایش (25 نفر) به روش مدل طراحی گانیه و گروه کنترل (25 نفر) به شیوه مرسوم آموزش دیدند. پس از جمعآوری دادهها، در تجزیه و تحلیل آنها از شاخصهای آمار توصیفی (میانگین، انحراف استاندارد) و آمار استنباطی (تحلیل کوواریانس و تحلیل واریانس چند متغیره) استفاده شد و توسط نرم افزار spss مورد محاسبه قرار گرفت. نتایج نشان داد به کارگیری الگوی گانیه در طراحی آموزشی درس علوم تجربی در مقایسه با شیوه مرسوم باعث افزایش یادگیری و یادداری میشود؛ اما از نظر انگیزش پیشرفت بین دو گروه تفاوت معناداری وجود ندارد. پرونده مقاله -
دسترسی آزاد مقاله
122 - تأثیر مصرف صبحانه بر عملکردهای شناختی و تحصیلی دانشآموزان پایه چهارم دوره ابتدایی در شهرستان گرمسار سال تحصیلی 1390 ـ 1389
نادر سلیمانی سارا خانیپژوهش حاضر با هدف مطالعه تاثیر مصرف صبحانه بر عملکردهای شناختی و پیشرفت تحصیلی دانش اموزان پایۀ چهارم دورۀ ابتدایی انجام شد. روش پژوهش علی –مقایسه ای و در قالب تک آزمون با مقایسه دو گروه و به روش نمونه گیری غیر تصادفی انجام شد . جامعه آماری پژوهش دانش آموزان پایه چکیده کاملپژوهش حاضر با هدف مطالعه تاثیر مصرف صبحانه بر عملکردهای شناختی و پیشرفت تحصیلی دانش اموزان پایۀ چهارم دورۀ ابتدایی انجام شد. روش پژوهش علی –مقایسه ای و در قالب تک آزمون با مقایسه دو گروه و به روش نمونه گیری غیر تصادفی انجام شد . جامعه آماری پژوهش دانش آموزان پایه چهارم مدارس ابتدایی شهرستان گرمسار در سال تحصیلی 1390- 1389 بودند. برای انتخاب نمونه پژوهش ابتدا یک پرسشنامه مقدماتی در بین دانش آموزان پایه چهارم مدارس شهر توزیع گردید تا با کمک والدین خود تکمیل نمایند. بعد از جمع اوری پرسشنامه ها، 120 نفر از دانش آموزانی که از شرایط مشابه برخور دار بودندو تنها وجه افتراق آنها عادت به صرف صبحانه بود ،به دو گروه 60نفری تقسیم شدند. برای سنجش متغیر ملاک در بعد عملکردهای شناختی از تست هوشی وکسلر کودکان( مرکب از ده خرده آزمون ) و در بعد عملکرد تحصیلی از معدل ترم قبلی دانش اموزان بهره گیری شد. داده های گردآوری شده با استفاده از شاخص های میانگین ، انحراف استاندارد و آزمون t مستقل تجزیه و تحلیل شدند . نتایج تحقیق نشان داد که مصرف صبحانه در پیشرفت تحصیلی دانش آموزان و عملکرد های شناختی آنان در هفت خرده آزمون تکمیل تصاویر ،تشابهات ،تنظیم تصاویر ،محاسبه عددی ،طراحی مکعب ،لغات و حافظه عددی تاثیر مثبت دارد. ( ( p≤0.05 پرونده مقاله -
دسترسی آزاد مقاله
123 - تأثیر الگوی کاوشگری بر تفکر انتقادی و نگرش دانشآموزان نسبت به کتاب درسی علوم تجربی در دوره ابتدایی
حسین مومنی مهموئی مرتضی کرمی مریم سادات سید شریفی کاخکیآموزش در خانه عبارت است از آموزش کودکان در محیط خانه و توسط خود والدین. در این روش آموزشی، برنامههای درسی و روشهای آموزشی توسط خود والدین و کودک مشخص میشود. پژوهش حاضر، با هدف بررسی دلایل گرایش به آموزش در خانه انجام گرفت. رویکرد این پژوهش کیفی بود که در آن 9 خانواده چکیده کاملآموزش در خانه عبارت است از آموزش کودکان در محیط خانه و توسط خود والدین. در این روش آموزشی، برنامههای درسی و روشهای آموزشی توسط خود والدین و کودک مشخص میشود. پژوهش حاضر، با هدف بررسی دلایل گرایش به آموزش در خانه انجام گرفت. رویکرد این پژوهش کیفی بود که در آن 9 خانواده در شهر تهران بر اساس نمونهگیری هدفمند و به صورت روش گلوله برفی انتخاب شدند. برای گردآوری اطلاعات از روشهای مصاحبه نیمه ساختار یافته و خود شرح حال نویسی استفاده شد. روش تجزیه و تحلیل یافتهها، تحلیل محتوای متن مصاحبه و اتوبیوگرافی بوده است. یافتههای پژوهش بیانگر آن است عامل اقتصادی به عنوان عامل مؤثر در گرایش به آموزش در خانه چندان مورد توجه والدین نبوده است. پیرامون عوامل فرهنگی اجتماعی به جو رقابتی مدارس، خالی بودن جای آموزشهای اخلاقی و ارزشهای انسانی در برنامههای درسی مدارس و تجربیات آموزشی والدین و احساس مسؤولیت والدین اشاره شده است. در مورد عوامل آموزشی و پداگوژیکی گرایش به آموزش در خانه، نارضایتی از برنامههای درسی، روشهای آموزشی در مدارس و استقلال در یادگیری، توجه به علایق و نیازهای کودک، پویایی روش و فرصت آموزش متقابل در آموزش در خانه بیان شد. تمرکزگرایی و سیاست زدگی آموزشی نیز نیز به عنوان خط مشیهای سیاسی مؤثر در آموزش در خانه ذکر گردید. پرونده مقاله -
دسترسی آزاد مقاله
124 -
Azizeh Chalak Parviz Birjandi S. Esmail Hosseini Ahmad Reza Jafari Dehkordi Omid Tabatabaei Sondos Mansouri Amir Farzad Ashouri Mansour Koosha Sahar Najarzadegan Ahmad Reza Lotfi MohammadAli Nadi Mohsen Salimian Fakhri Shatalebi Nader Soleimani Mansoor Tavakoli Omid Tabatabaei Hossein Bagheri Hossein Heidari Tabrizi Zahra Fotovatnia GholamReza Akbari Behrouz Nouri Samani Safura Masaeli GholamReza Zareie Naser Abasszadeh Narges Saeedian -
دسترسی آزاد مقاله
125 - شناسایی جایگاه برنامه درسی تربیت جنسی در نظام آموزشی
زهره قلاوند پروین صمدی پروین احمدی نرگس کشتی آرایتربیت جنسی یکی از پیچیده و حساسترین ساحتهای تعلیم و تربیت است. ازاینرو، پژوهش حاضر با هدف شناسایی جایگاه برنامه درسی تربیت جنسی در نظام آموزشی کشور در طی سالهای 1398-1380 انجام شد. مطالعه حاضر از نوع کیفی و از روش سنتزپژوهی است. جامعۀ اطلاعرسان شامل همۀ پژوهشهای ع چکیده کاملتربیت جنسی یکی از پیچیده و حساسترین ساحتهای تعلیم و تربیت است. ازاینرو، پژوهش حاضر با هدف شناسایی جایگاه برنامه درسی تربیت جنسی در نظام آموزشی کشور در طی سالهای 1398-1380 انجام شد. مطالعه حاضر از نوع کیفی و از روش سنتزپژوهی است. جامعۀ اطلاعرسان شامل همۀ پژوهشهای علمی مرتبط با هدف پژوهش بوده که با توجه به جستوجوی منظم در پایگاههای اطلاعاتی (مگ ایران، جهاددانشگاهی، نورمگز و...)، بر اساس معیارهای ورود تعداد 206 پژوهش علمی شناسایی و پس از مطالعات لازم، 36 پژوهش بر اساس ملاکهای خروج بهعنوان نمونه انتخاب و با روش سنتزپژوهی شش مرحلهای روبرتس، ترکیبی بهینه از نتایج آنها ارائه شده است. برای فراهم آوردن اطلاعات مورد نیاز، از فرم کاربرگ و برای اطمینان از میزان پایایی، از ضریب کاپای کوهن استفاده شد. طبق یافتههای حاصل از سنتزپژوهی، تربیت جنسی حائز چهار مضمون شامل شمشیر دولبه بودن مفهوم تربیت جنسی، تهدیدها - فرصتهای تربیت جنسی، تربیت جنسی مبتنی بر آموزش، زبان و فرهنگ در تربیت جنسی است. نتایج نشان داد که برنامه درسی تربیت جنسی در نظام آموزشی یک برنامه درسی خاموش است که با یک طراحی مدون توسط سیاستگذاران میتوان آن را روشن نمود. پرونده مقاله -
دسترسی آزاد مقاله
126 - مرور سیستماتیک مؤلفههای حمایت از شکلگیری PCK در میان نومعلمان
مریم خدارحمی مصطفی قادری محبوبه خسروی محمود مهرمحمدیاز آنجا که PCK به عنوان یکی از ارکان دانش معلمی در نظر گرفته میشود، این مطالعۀ با هدف درک چگونگی حمایت از PCKو طبقهبندی مؤلفهها و عوامل حمایت از شکلگیری آن انجام شده است. این مطالعۀ مروری سیستماتیک از ۱۱ سال تحقیق در فاصلۀ سالهای (۲۰۲۱-۲۰۱۰) در زمینه مؤلفههای حمای چکیده کاملاز آنجا که PCK به عنوان یکی از ارکان دانش معلمی در نظر گرفته میشود، این مطالعۀ با هدف درک چگونگی حمایت از PCKو طبقهبندی مؤلفهها و عوامل حمایت از شکلگیری آن انجام شده است. این مطالعۀ مروری سیستماتیک از ۱۱ سال تحقیق در فاصلۀ سالهای (۲۰۲۱-۲۰۱۰) در زمینه مؤلفههای حمایت از شکلگیری PCK است. کلیدواژههای مورد استفاده در این پژوهش عبارتند از: توسعۀ PCK، حمایت از شکلگیری PCK نومعلمان، دانش موضوعی-تربیتی و آموزش معلمان، برنامۀ حمایت از نومعلمان، رشد حرفهای و دانش موضوعی-تربیتی که در پایگاههای Science Direct، Google Scholar ، Eric ، Scopus ، Sage ، Web of Science جستجو شد. در جستجوی اولیه ۷۵۰ مقاله شناسایی شد که در مرحلۀ اول غربالگری ۹۵ مطالعۀ مرتبط به دست آمد؛ در نهایت در مرحلۀ دوم غربالگری، پس از بررسی متن کامل مطالعات و ارزیابی آنها با استفاده از ابزار ارزیابی روشهای ترکیبی (MMAT) ۳۹ مقاله وارد فرایند مرور سیستماتیک شدند. تجزیه و تحلیل مطالعات بر ۱۲ مؤلفه و ۹ گروه بازیگر تأکید داشت که از میان ۱۲ مؤلفه، مؤلفههای نقش برنامههای آمادهسازی معلمان در توسعۀ PCK ، PCK مبتنی بر تجربۀ شخصی و رشد تأمل معلمان همسو با توسعۀ PCK به عنوان مؤلفههای اصلی حمایت از شکلگیری PCK شناخته شدهاند. سایر مؤلفهها عبارتند از: توسعۀ PCK در جامعۀ یادگیرندگان تدریس، رشد حرفهای مبتنی بر PCK، برنامۀ مربیگری با محوریت PCK، حمایت رسمی مدارس از شکلگیری PCK، تسلط به حیطۀ موضوعی به عنوان معلم، تأثیر متقابل توسعۀ PCK و رشد باورهای سازندۀ معلم، توسعۀ PCK در بستر آموزش مجازی، تجارب زیستۀ مشترک با دانشآموزان. در این مطالعۀ، چندین بازیگر از ادبیات مربوطه شناسایی و بر اساس درصد به ۹ دسته طبقهبندی شدند که شامل معلم راهنما، نومعلمان، مدیران مدارس، مسئولان برگزاری دورهها در دانشگاه، دانشآموزان، همکاران، استاد راهنما، محققان و والدینند و از بین آنها معلم راهنما، نومعلمان، مدیران مدارس و مسئولان برگزاری دورهها در دانشگاه به عنوان بازیگران برتر شکلگیری PCK شناخته میشوند. پرونده مقاله -
دسترسی آزاد مقاله
127 - Presenting a New Model of Optimal Coordinated beam former Vector Selection in DRFM for Radar Jamming
Hasan Mohammadi khodadad Halili Vahidreza Soltaninia Meysam Bayat Saeed TalatiDigital Radio Frequency Memory (DRFM) is a technique that uses high-speed sampling and digital memory to store radio frequency and microwave signals. DRFM is a popular technique for implementing false-target ECM systems. DRFM is a technique that stores and reproduces ra چکیده کاملDigital Radio Frequency Memory (DRFM) is a technique that uses high-speed sampling and digital memory to store radio frequency and microwave signals. DRFM is a popular technique for implementing false-target ECM systems. DRFM is a technique that stores and reproduces radio frequency (RF) and microwave signals. Input an RF signal that has been converted to a frequency sufficient for sampling by a high-speed A/D converter (ADC). The sampled signal is stored in a high-speed memory and can be retrieved and converted to the original signal using a D/A converter (DAC). In this article, the principles and architecture of DRFM have been reviewed and to improve the performance of this system, the method of interference matching has been proposed using a coordinated beam shaper to improve the performance of this system in creating interference. This article, it is presented to evaluate the proposed method in improving the interference values and BER in the method based on the improvement of the coordinated beam former. For this purpose, a DRFM was considered for disruption. Then the proposed method was implemented with the help of signal processing and in MATLAB software on this DRFM. In the proposed method, an objective function is considered by considering the increase in the number of objectives in proportion to the fulfillment of the acceptable rate. Based on this objective function, the amount of interference and BER has been reduced. The effect of increasing targets on interference and BER has been investigated in evaluating the proposed method. For this purpose, the SINR value was changed, and based on the change of the SINR value and the change in the number of targets, the evaluation was done. The obtained results show that with the increase in the number of targets, the amount of interference and also the amount of BER have increased. The increase in the number of targets in the proposed optimal and quasi-optimal coordinated beam former method with the increase in the number of targets is much less than that of the coordinated beam former. It is also the reason for this superiority. Also, the desired optimization function in the stated situations has caused this importance to be taken into account. The proposed method has been evaluated in terms of bit error rate and interference. The evaluation results show a reduction in bit error rate up to 6%, and interference up to 5% compared to the coordinated beam former as the number of targets increases. پرونده مقاله -
دسترسی آزاد مقاله
128 - مدلسازی تولید اولیه سطح زمین با استفاده از شاخصهای ماهواره لندست-8 در مراتع سیاهپوش و گنجگاه استان اردبیل، ایران
پشمینه محمدنژاد مهدی معمری اردوان قربانی فرید دادجو ودود محمدیهدف از این مطالعه برآورد تولید (تولید اولیه سطح زمین) فرمهای رویشی و کل با استفاده از تصاویر لندست 8 در مراتع سیاهپوش و گنجگاه استان اردبیل بود. نمونهبرداری میدانی در خرداد ماه 1398 انجام شد و تصویر ماهوارهای همزمان با آن دریافت شد. تعداد هفت مکان نمونهبرداری انت چکیده کاملهدف از این مطالعه برآورد تولید (تولید اولیه سطح زمین) فرمهای رویشی و کل با استفاده از تصاویر لندست 8 در مراتع سیاهپوش و گنجگاه استان اردبیل بود. نمونهبرداری میدانی در خرداد ماه 1398 انجام شد و تصویر ماهوارهای همزمان با آن دریافت شد. تعداد هفت مکان نمونهبرداری انتخاب شد و در هر مکان سه ترانسکت 100 متری موازی و عمود بر جهت شیب مستقر شد و در امتداد هر ترانسکت از 10 پلات (یک متر مربعی)، تولید فرمهای رویشی به روش تصادفی-سیستماتیک برداشت شد (در مجموع 210 پلات). تعداد 22 شاخص گیاهی با توجه به مرور منابع انتخاب و برای منطقه محاسبه شد. سپس، همبستگی بین تولید فرمهای رویشی و کل با شاخصهای گیاهی محاسبه و شاخص گیاهی دارای بالاترین همبستگی برای مدلسازی انتخاب شد. برای مدلسازی از معادله خطی درجه یک استفاده شد و معادلات بهدست آمده در نرمافزار ArcGIS بهصورت نقشه برآورد شد. نتایج نشانداد از بین شاخصهای مورد بررسی، شاخص NDVI مناسبترین شاخص برای مدلسازی بود؛ با اینحال بیشترین همبستگی این شاخص با تولید کل (88/0) و تولید گندمیان (78/0) بود؛ درحالیکه همبستگی کمتری با تولید پهنبرگان علفی (41/0) و بوتهایها (31/0) داشت. محدوده تغییرات تولید مدلسازی شده برای گندمیان 0 تا 1857 کیلوگرم در هکتار، پهنبرگان علفی 9 تا 766 کیلوگرم در هکتار، بوتهایها 0 تا 458 کیلوگرم در هکتار و برای تولید کل 9 تا 3081 کیلوگرم در هکتار بود. ارزیابی صحت مدلها با معیارهای RMSE، MDE و MAE انجام شد و صحت در حد قابل قبول بود. همچنین مقدار اختلاف میانگین دادههای واقعی با مدلسازی شده تقریباً برابر صفر بود. از نتایج این مطالعه میتوان برای ایجاد تعادل بین عرضه و تقاضای تولید مرتع در راستای توسعه پایدار اکوسیستمهای مرتعی منطقه استفاده کرد. پرونده مقاله -
دسترسی آزاد مقاله
129 - استفاده از الگوریتم رقابت استعماری اصلاح شده به منظور افزایش سرعت و دقت سیستم تشخیص نفوذ هوشمند
محمد نظرپور نوید نظافتی سجاد شکوهیاردر تمام سیستمهای پردازش اطلاعات، شناسایی حملات سایبری یک چالش اصلی محسوب می شود و با شناسایی به موقع حملات میتوان اثرات آن را مسدود یا کم کرد. سیستم اینترنت اشیا نیز از این پدیده مستثنی نبوده و با پیشرفت رو به رشد این فناوری و گسترش زیرساخت های آن، نیاز به سیستم تشخ چکیده کاملدر تمام سیستمهای پردازش اطلاعات، شناسایی حملات سایبری یک چالش اصلی محسوب می شود و با شناسایی به موقع حملات میتوان اثرات آن را مسدود یا کم کرد. سیستم اینترنت اشیا نیز از این پدیده مستثنی نبوده و با پیشرفت رو به رشد این فناوری و گسترش زیرساخت های آن، نیاز به سیستم تشخیص نفوذ هوشمند با دقت و سرعت بالا یک امر ضروری است. شبکههای عصبی سیستمهای مدرنی هستند که از روشهای محاسباتی نوین برای یادگیری ماشین، نمایش دانش و در نهایت استفاده از دانش کسبشده برای به حداکثر رساندن پاسخهای خروجی سیستمهای پیچیده استفاده می کنند. یکی از معایب استفاده از آموزش با روش های کلاسیک در شبکه های عصبی، گیرافتادن در نقاط بهینه محلی است. در این مقاله از الگوریتم فراابتکاری رقابت امپریال (ICA) برای آموزش شبکه های عصبی استفاده کرده، نشان دادیم که این الگوریتم در زمینه تشخیص نفوذ در سیستم اینترنت اشیا، می تواند عملکرد بسیار بهتری از منظر سرعت و دقت نسبت به روش های آموزشی کلاسیک داشته باشد .نتایج نشان می دهد روش پیشنهادی دارای دقت 90% می باشد که در مقایسه با روش شبکه عصبی کلاسیک که دارای دقت 75 درصد بوده عملکرد بهتری دارد. پرونده مقاله -
دسترسی آزاد مقاله
130 - نقش صورت در تعالی تجربۀ زیباشناختی با تأکید بر آرای فیلسوفان اسلامی(موردپژوهی: خانۀ طباطباییها)
مریم بختیاریان فیروزه شیبانی رضوانیهدف از این پژوهش تبیین جایگاه صورت و ارتباط آن با معنا در هنر اسلامی از منظر متفکران این حوزه با ذکر نمونه از معماری دوران اسلامی است. در این پژوهشِ کیفی، امکاناتِ صورت در تعالی هنر اسلامی، معیارهای زیبایی از منظر حکمای اسلامی و با نظر به عناصر صوری در معماری خانۀ طباطب چکیده کاملهدف از این پژوهش تبیین جایگاه صورت و ارتباط آن با معنا در هنر اسلامی از منظر متفکران این حوزه با ذکر نمونه از معماری دوران اسلامی است. در این پژوهشِ کیفی، امکاناتِ صورت در تعالی هنر اسلامی، معیارهای زیبایی از منظر حکمای اسلامی و با نظر به عناصر صوری در معماری خانۀ طباطباییها توصیف و تحلیل شده است. نتایج برآمده از این پژوهش را میتوان اینگونه خلاصه کرد: از منظر فیلسوفانِ شناخته شدۀ اسلامی اهمیت صورت در تعالی هنر اسلامی آنجایی است که مخاطب از طریق این هنر به تجربۀ معنوی نزدیک میشود. در تطبیق جایگاه صورت در زیباشناسی اسلامی با مفهوم ِفرم در تفکر زیباشناسیِ غرب، میتوان گفت نقش صورت در کشف و شناخت رموز موجود در پدیدههاست و اهمیت این نقش، تنها در ارتباط صورت با معنای آن قابلشناسایی است. عناصر صوری چون مرکزگرایی وهندسه، نماد و رمز، نور و رنگ و انتزاع، شواهد آشکاری در میان آثار هنری چون هنر فرش، نگارگری، خوشنویسی، و معماری در دوران اسلامی دارد. در مطالعه موردی از خانه طباطباییها عناصری چون مرکز وهندسه، رمز و نماد، رنگ و نور و همچنین انتزاع؛ مفاهیم متعالی چون وحدت، خیر، کمال و زیبایی را به هم پیوند میدهد. پرونده مقاله -
دسترسی آزاد مقاله
131 - لزوم تغییر رهیافتی در مطالعات فرم شهر با توجه به رهیافتهای فلسفۀ علم
احمدعلی نامداریان سمیه خانیبا وجود گستردگی و تنوع، عمدۀ مطالعات فرم شهری در دو دستۀ مورخان معماری و شهرسازی و علم ریختشناسی قابلتقسیم است. اما این مطالعات عمدتاً به توصیف و چیستی فرم شهر پرداخته و هیچ یک، تحولات و دگرگونیهای شهرهای امروزی را به خوبی توضیح نمیدهد. اینکه چه عواملی موجب تغییر ف چکیده کاملبا وجود گستردگی و تنوع، عمدۀ مطالعات فرم شهری در دو دستۀ مورخان معماری و شهرسازی و علم ریختشناسی قابلتقسیم است. اما این مطالعات عمدتاً به توصیف و چیستی فرم شهر پرداخته و هیچ یک، تحولات و دگرگونیهای شهرهای امروزی را به خوبی توضیح نمیدهد. اینکه چه عواملی موجب تغییر فرم شهر میشود نیازمند کمک گرفتن از یک دستگاه نظری تازه است. این مقاله تلاش دارد با استفاده از مطالعۀ اسنادی و سپس تحلیل محتوای کیفی و با انطباق بنیانهای مطالعات کنونی فرم شهر با دستگاههای فلسفۀ علم، به دستهبندی و آسیبشناسی مطالعات فرم شهری بپردازد و سپس به کمک رهیافت واقعگرایی انتقادی، لزوم تغییر رهیافتی در مطالعات فرم شهر را ثابت کند. مطالعۀ اسنادی و تحلیل محتوای مطالعات پیشین، نشان میدهد مطالعات فرم شهر، آگاهانه یا ناآگاهانه، عمدتاً مبتنی بر رهیافتهای پوزیتویستی و عقلگرایی انتقادی است که اغلب هستیشناسی فرم شهری را به معرفتشناسی آن تقلیل میدهد. این مقاله، به منظور فراروی از مغالطۀ معرفتی گرایشهای فرم شهر و توضیح دگرگونی شهرهای امروزی، تلاش دارد از رهیافت واقعگرایی انتقادی بهره گیرد. رهیافت پیشنهادی، با پرداختن به ساختارهای پنهان فرم شهر، به نیروها و فرایندهایی میپردازد که موجب تولید و بازتولید فرم شهر میشوند. برای توضیح دگرگونی شهرهای امروزی، مطالعات فرم باید از شناخت صرف و مغالطۀ معرفتی، به سمت هستیشناسی و ساختارهای پنهان فرم شهر حرکت کنند پرونده مقاله -
دسترسی آزاد مقاله
132 - تجسم اعمال و ملکات نفس از نگاه عرفا
اکبر اسدعلیزادهآنچه از متون عرفان و ادبی بر می آید انسان در عالم آخرت بر اساس اعمال و عقاید خویش هویتی متناسب با آن را پیدا کرده و تمام رفتارها، کردارها، صفات و ملکات نفسانی خوب و بد ایشان تجسم می یابد.اگر خصوصیات درندگان و وحوش بر او غلبه نماید، صورت و شکلی مانند وحوش و حیوانات درند چکیده کاملآنچه از متون عرفان و ادبی بر می آید انسان در عالم آخرت بر اساس اعمال و عقاید خویش هویتی متناسب با آن را پیدا کرده و تمام رفتارها، کردارها، صفات و ملکات نفسانی خوب و بد ایشان تجسم می یابد.اگر خصوصیات درندگان و وحوش بر او غلبه نماید، صورت و شکلی مانند وحوش و حیوانات درنده به خود خواهد گرفت، و اگر ویژگی های چرندگان و بهائم بر او چیره شود، صورت انسانی وی به شکل همان حیوانات مبدل خواهد گشت.و آن کسی که پیوسته در شهوت و هوای نفس غوطه ور باشد، به شکل حیوانات در می آید. و اگر مومن از دنیا برود و امر خداوند را خوب به جا بیاورد به صورتی زیبا، نظیف و خوشبو در می آید. اگر انسان چشم بصیرت داشته باشد می تواند در همین دنیا، هویت خود و دیگران را مشخص کند، هر کس با چشم بصیرت باطن خود را نظاره کند آن را پر از انواع موذی ها و درندگان؛ همچون شهوت، غضب، مکر، حسد، حقد، عجب و ریا خواهد دید، ولی اکثر مردم از مشاهده آن حقیقت محجوب اند. آن هنگام که حجاب برداشته شد و او در قبر گذاشتند ، آنها را بالعیان، در حالی که آنها به صور و اشکال مناسب با معانی آن متمثل شده اند مشاهده خواهد کرد. پرونده مقاله -
دسترسی آزاد مقاله
133 - وحدت وجود از دیدگاه عین القضات همدانی
مرتضی شجاریوحدتِ وجود به معنای اینکه خداوند موصوف به وجود است و هیچیک از کائنات به وجود توصیف نمیشوند، در آثارِ عینالقضات همدانی به خصوص در مکاتباتِ وی، بسیار مجالِ ظهور یافته است. عین القضات با تأویلی بر آیۀ کریمۀ «أَلا إِنَّهُمْ فِی مِرْیَةٍ مِنْ لِقَاءِ رَبِّهِمْ أَلا إِنَّه چکیده کاملوحدتِ وجود به معنای اینکه خداوند موصوف به وجود است و هیچیک از کائنات به وجود توصیف نمیشوند، در آثارِ عینالقضات همدانی به خصوص در مکاتباتِ وی، بسیار مجالِ ظهور یافته است. عین القضات با تأویلی بر آیۀ کریمۀ «أَلا إِنَّهُمْ فِی مِرْیَةٍ مِنْ لِقَاءِ رَبِّهِمْ أَلا إِنَّهُ بِکُلِّ شَیْءٍ مُحِیطٌ» (فصّلت/54) کسانی را که از لقای پروردگار در شک هستند، کور میداند. کوران کسانی هستند که احاطۀ خداوند بر تمامی موجودات و از جمله بر وجود خود را نمیبینند؛ چه اگر این احاطه را میدیدند، مشاهده میکردند که خود جلوهای از خداوند هستند. از نظر وی خداوند به واسطۀ احاطهای که بر مظاهرش دارد، هم مرکز است و هم محیط. بنابراینتنها حق تعالی موجود است؛ اما نه به آن معنی که کائنات، سراب باشند. بلکه آنها جلوههای گوناگون وجود واحد هستند که قاضی آنها را گاهی حادث نامیده است. خداوند قدیم است به این معنی که فراتر از زمان است و همچنانکه در ازل، خدا بود و چیزی با او نبود، در ابد و در حال نیز به همان گونه است پرونده مقاله -
دسترسی آزاد مقاله
134 - Cognitive and Metacognitive Strategy Instruction and Their Impact on Iranian EFL Learners’ Writing Cognitive Processes
Maryam Khezri Nejad Mojgan Rashtchi Zohreh SeifooriThis study explores the efficacy of cognitive and metacognitive strategy instruction in enhancing the writing cognitive processes of Iranian English as a Foreign Language (EFL) learners. Utilizing various instructional approaches, including scaffolded metacognitive inst چکیده کاملThis study explores the efficacy of cognitive and metacognitive strategy instruction in enhancing the writing cognitive processes of Iranian English as a Foreign Language (EFL) learners. Utilizing various instructional approaches, including scaffolded metacognitive instruction and writing metacognitive strategies, the research investigates the effects on learners’ metacognitive awareness and writing accuracy. Research on cognitive-oriented writing is a young but growing field. The current mixed methods study explored the extent to which brainstorming, focus on form (FonF), and metacognitive strategy instruction could affect cognitive processes (planning, translating, revising) of Iranian EFL learners. The participants were 150 BA learners in three intact classes majoring in English language translation at IAU, Islamshahr Branch. During 16 sessions, each group experienced brainstorming, metacognitive strategy instruction, or FonF activities as pre-task conditions. Writing pretest and posttest, and semi-structured interview were utilized to collect the data. The results obtained from one-way ANOVA revealed that pre-task conditions statistically impacted the cognitive processes of learners’ writings. The findings suggest a positive correlation between strategic knowledge, metacognitive strategies, and improved writing skills among Iranian EFL learners. The study not only contributes to the understanding of the interplay between cognitive and metacognitive processes in language learning but also provides valuable insights for educators aiming to enhance writing proficiency in EFL settings. پرونده مقاله -
دسترسی آزاد مقاله
135 - Modelling Mechanical Properties of AISI 439-430Ti Ferritic Stainless Steel Sheet
N Brinis B Regaiguia O Chahaoui N Maatougui M.L FaresThe comprehension of the anisotropy impactson mechanical properties of the rolled steel sheets was investigated using a non-quadratic anisotropic yield function. In this study, experimental and modelling determination regardingthe behaviourof an industrial rolledsheet f چکیده کاملThe comprehension of the anisotropy impactson mechanical properties of the rolled steel sheets was investigated using a non-quadratic anisotropic yield function. In this study, experimental and modelling determination regardingthe behaviourof an industrial rolledsheet for a ferritic stainless low-carbon steel were carried out. The parameters of the associated yield equation, derived from the three orthotropic yield functions proposed by Hill48, Yld96 and Yld2000-2d, were determined. Predictions and the evolution of normalized yield stress and normalized Lankford parameters (plastic strain ratio) obtained by the presented investigative are considered. The forecasts given by the YLD2000-2d criterion are consistent with that of the experience. In order to describe the path of strain behavior, the isotropic hardening function is described using the following four empirical standard formulae based on: Hollomon, Ludwick, Swift and Voce law.More accurately,the anisotropy coefficients of three yield functions are represented as a function of the longitudinal equivalent plastic strain. پرونده مقاله -
دسترسی آزاد مقاله
136 - Chip Formation Process using Finite Element Simulation “Influence of Cutting Speed Variation”
A Kherraf Y Tamerabet M Brioua R BenboutaThe main aim of this paper is to study the material removal phenomenon using the finite element method (FEM) analysis for orthogonal cutting, and the impact of cutting speed variation on the chip formation, stress and plastic deformation. We have explored different cons چکیده کاملThe main aim of this paper is to study the material removal phenomenon using the finite element method (FEM) analysis for orthogonal cutting, and the impact of cutting speed variation on the chip formation, stress and plastic deformation. We have explored different constitutive models describing the tool-workpiece interaction. The Johnson-Cook constitutive model with damage initiation and damage evolution has been used to simulate chip formation. Chip morphology, Stress and equivalent plastic deformation has been presented in this paper as results of chip formation process simulation using Abaqus explicit Software. According to simulation results, the variation of cutting speeds is an influential factor in chip formation, therefore with the increasing of cutting speed the chip type tends to become more segmented. Additionally to the chip formation and morphology obtained from the finite element simulation results, some other mechanical parameters; which are very difficult to measure on the experimental test, can be obtained through finite element modeling of chip formation process. پرونده مقاله -
دسترسی آزاد مقاله
137 - The Effects of Forming Parameters on the Single Point Incremental Forming of 1050 Aluminum Alloy Sheet
R SafdarianThe single point incremental forming (SPIF) is one of the dieless forming processes which is widely used in the sheet metal forming. The correct selection of the SPIF parameters influences the formability and quality of the product. In the present study, the Gurson-Tver چکیده کاملThe single point incremental forming (SPIF) is one of the dieless forming processes which is widely used in the sheet metal forming. The correct selection of the SPIF parameters influences the formability and quality of the product. In the present study, the Gurson-Tvergaard Needleman (GTN) damage model was used for the fracture prediction in the numerical simulation of the SPIF process of aluminum alloy 1050. The GTN parameters of AA 1050 sheet were firstly identified by the numerical simulation of tensile test and comparison of the experimental and numerical stress-strain curves. The identified parameters of the GTN damage model were used for fracture prediction in the SPIF process. The numerical results of the fracture position, thickness variation across the sample and forming height were compared with the experimental results. The numerical results had good agreement with the experimental ones. The effect of SPIF main parameters was investigated on the formability of samples by the verified numerical model. These parameters were tool rotation speed, tool feed rate, tool diameter, wall angle of the sample, vertical pitch, and friction between the tool and the blank. پرونده مقاله -
دسترسی آزاد مقاله
138 - An Efficient Finite Element Formulation Based on Deformation Approach for Bending of Functionally Graded Beams
H Ziou M Himeur H Guenfoud M GuenfoudFinite element formulations based generally on classical beam theories such as Euler-Bernoulli or Timoshenko. Sometimes, these two formulations could be problematic expressed in terms of restrictions of Euler-Bernoulli beam theory, in case of thicker beams due to non-co چکیده کاملFinite element formulations based generally on classical beam theories such as Euler-Bernoulli or Timoshenko. Sometimes, these two formulations could be problematic expressed in terms of restrictions of Euler-Bernoulli beam theory, in case of thicker beams due to non-consideration of transverse shear; phenomenon that is known as shear locking characterized the Timoshenko beam theory, in case of thin beams; problem of slow of convergence in regards to the element of Timoshenko beam. In responding to this problematic, a new beam finite element model is developed to study the static bending of functionally graded beams. The originality of this model lies in the use of a deformation approach with the consideration of a central node positioned in the middle of the beam. The degrees of freedom of this node are subsequently eliminated by the method of static condensation. In addition, this model is suitable for all linear structures regardless of L/h ratio. Functionally graded material beams have a smooth variation of material properties due to continuous change in micro structural details. The mechanical properties of the beam are assumed to vary continuously in the thickness direction by a simple power-law distribution in terms of the volume fractions of the constituents. A simply supported beam subjected to uniform load for different length-to-thickness ratio has been chosen in the analysis. Finite element solutions obtained with the new finite element model are presented, and the obtained results are evaluated with the existing solutions to verify the validity of the present model. پرونده مقاله -
دسترسی آزاد مقاله
139 - New Two 20-Node High-Order Finite Elements Based on the SFR Concept for Analyzing 3D Elasticity Problems
H Djahara K Meftah L Sedira A AyadiThis paper proposes conforming and nonconforming 20-node hexahedral finite elements. The elements’ formulation stems from the so-called Space Fiber Rotation (SFR) concept, allowing a spatial rotation of three-dimensional virtual fiber within the elements. Adding r چکیده کاملThis paper proposes conforming and nonconforming 20-node hexahedral finite elements. The elements’ formulation stems from the so-called Space Fiber Rotation (SFR) concept, allowing a spatial rotation of three-dimensional virtual fiber within the elements. Adding rotational degrees of freedom results in six degrees of freedom per node (three rotations and three translations) which enhances the approximation of the classical displacement field. The incompatible modes approach has been adopted in the nonconforming element formulation in order to avoid numerical deficiencies associated with the Poisson’s ratio locking phenomenon. The accuracy of the proposed elements is examined through a series of three-dimensions linear elastic benchmarks including beam, plates, and shell structures. The proposed elements were shown to give better results than the standard 20-node hexahedron especially when mesh distortion is applied. This confirms that the two proposed elements are less sensitive to mesh distortion. The elements also show good performance when compared with analytical and numerical solutions from the literature. پرونده مقاله -
دسترسی آزاد مقاله
140 - Numerical and Experimental Research of Deep Drawing Process
N ArabThere are mainly two methods of deep drawing analysis; experimental and analytical/numerical. Experimental analysis can be useful in analyzing the process to determine the process parameters that produce a defect free product, and the analytical/numerical modeling can b چکیده کاملThere are mainly two methods of deep drawing analysis; experimental and analytical/numerical. Experimental analysis can be useful in analyzing the process to determine the process parameters that produce a defect free product, and the analytical/numerical modeling can be used to model and analyze the process through all stages of deformation. This approach is less time consuming and more economical. Sheet metal forming often includes biaxial in-plane deformation with non-proportional strain paths. In deep drawing of cylindrical cup, the deformation in the flange in dominated by pure shear deformation, while it changes to plane strain when the material is drawn into the die. This paper deals with the analysis of deep drawing of circular blanks into axi-symmetric cylindrical cup using numerical modeling. The blank drawability has been related both theoretically and experimentally with the initial diameter of the blank and deep drawing parameters. The strains in the radial and circumferential directions have been measured. A correlation on the flange thickness variation by taking into account the work hardening with the analytical and experimental values also has been searched. پرونده مقاله -
دسترسی آزاد مقاله
141 - Closed Form Solution for Electro-Magneto-Thermo-Elastic Behaviour of Double-Layered Composite Cylinder
A Loghman H ParsaElectro-magneto-thermo-elastic response of a thick double-layered cylinder made from a homogeneous interlayer and a functionally graded piezoelectric material (FGPM) outer layer is investigated. Material properties of the FGPM layer vary along radius based on the power چکیده کاملElectro-magneto-thermo-elastic response of a thick double-layered cylinder made from a homogeneous interlayer and a functionally graded piezoelectric material (FGPM) outer layer is investigated. Material properties of the FGPM layer vary along radius based on the power law distribution. The vessel is subjected to an internal pressure, an induced electric potential, a uniform magnetic field and a temperature gradient. Stresses and radial displacement are studied for different material in-homogeneity parameters in the FGPM layer. It has been shown that the material in-homogeneity parameters significantly affect the stress distribution in both layers. Therefore by selecting a suitable material parameter one can control stress distribution in both homogeneous and FGPM layers. It has been found that under electro-magneto-thermo-mechanical loading minimum effective stress can be achieved by selecting in the FGPM layer. پرونده مقاله -
دسترسی آزاد مقاله
142 - Non Uniform Rational B Spline (NURBS) Based Non-Linear Analysis of Straight Beams with Mixed Formulations
R Ranjan J.N ReddyDisplacement finite element models of various beam theories have been developed traditionally using conventional finite element basis functions (i.e., cubic Hermite, equi-spaced Lagrange interpolation functions, or spectral/hp Legendre functions). Various finite element چکیده کاملDisplacement finite element models of various beam theories have been developed traditionally using conventional finite element basis functions (i.e., cubic Hermite, equi-spaced Lagrange interpolation functions, or spectral/hp Legendre functions). Various finite element models of beams differ from each other in the choice of the interpolation functions used for the transverse deflection w, total rotation , and/or shear strain , as well as the variational method used (e.g., collocation, weak form Galerkin, or least-squares). When nonlinear shear deformation theories are used, the displacement finite element models experience membrane and shear locking. The present study is concerned with development of alternative beam finite elements using both uniform and non-uniform rational b-splines (NURBS) to eliminate shear and membrane locking in an hpk finite element setting for both the Euler-Bernoulli beam and Timoshenko beam theories. Both linear and non-linear analysis are performed using mixed finite element models of the beam theories studied. Results obtained are compared with analytical (series) solutions and non-linear finite element and spectral/hp solutions available in the literature, and excellent agreement is found for all cases. پرونده مقاله -
دسترسی آزاد مقاله
143 - Dynamic Fracture Analysis Using an Uncoupled Arbitrary Lagrangian Eulerian Finite Element Formulation
A.R Shahani M.R AminiThis paper deals with the implementation of an efficient Arbitrary Lagrangian Eulerian (ALE) formulation for the three dimensional finite element modeling of mode I self-similar dynamic fracture process. Contrary to the remeshing technique, the presented algorithm can c چکیده کاملThis paper deals with the implementation of an efficient Arbitrary Lagrangian Eulerian (ALE) formulation for the three dimensional finite element modeling of mode I self-similar dynamic fracture process. Contrary to the remeshing technique, the presented algorithm can continuously advance the crack with the one mesh topology. The uncoupled approach is employed to treat the equations. So, each time step is split into two phases: an updated Lagrangian phase followed by an Eulerian phase. The implicit time integration method is applied for solving the transient problem in Lagrangian phase with no convective effects. A mesh motion scheme, in which the related equations need not to be solved at every time step, is proposed in Eulerian phase. The critical dynamic stress intensity factor criterion is used to determine the crack velocity. The variation of dynamic stress intensity factor along the crack front is also studied based on the interaction integral method. The proposed algorithm is applied to investigate the dynamic crack propagation in the DCB specimen subjected to fixed displacement. The predicted results are compared with the experimental study cited in the literature and a good agreement is shown. The proposed algorithm leads to the accurate and efficient analysis of dynamic crack propagation process. پرونده مقاله -
دسترسی آزاد مقاله
144 - A New Finite Element Formulation for Buckling and Free Vibration Analysis of Timoshenko Beams on Variable Elastic Foundation
A Mirzabeigy M Haghpanahi R MadoliatIn this study, the buckling and free vibration of Timoshenko beams resting on variable elastic foundation analyzed by means of a new finite element formulation. The Winkler model has been applied for elastic foundation. A two-node element with four degrees of freedom is چکیده کاملIn this study, the buckling and free vibration of Timoshenko beams resting on variable elastic foundation analyzed by means of a new finite element formulation. The Winkler model has been applied for elastic foundation. A two-node element with four degrees of freedom is suggested for finite element formulation. Displacement and rotational fields are approximated by cubic and quadratic polynomial interpolation functions, respectively. The length of the element is assumed to be so small, so that linear variation could be considered for elastic foundation through the length of the element. By these assumptions and using energy method, stiffness matrix, mass matrix and geometric stiffness matrix of the proposed beam element are obtained and applied to buckling and free vibration analysis. Accuracy of obtained formulation is approved by comparison with the special cases of present problem in other studies. Present formulation shows faster convergence in comparison with conventional finite element formulation. The effects of different parameters on the stability and free vibration of Timoshenko beams investigated and results are completely new. پرونده مقاله -
دسترسی آزاد مقاله
145 - اثر دما روی رشد، طول عمر و میزان پارازیتیسمزنبور Closterocerus formosus (Hym.: Eulophidae) پارازیتوئید مگس مینوز برگ سبزی Liriomyza trifolii (Dip.: Agromyzidae)
شهرام حسامی هادی استوان ابراهیم ابراهیمی محمود شجاعی کریم کمالیدر این تحقیق تاثیر دماهای مختلف (15، 20، 25، 30 و 35 درجه سلسیوس) بر طول دوره رشد (تخم تا خروج حشره کامل)، طول عمر حشره کامل ماده و میزان پارازیتیسم زنبور Closterocerus formosus Westwood به عنوان یکی از دشمنان طبیعی مهم مگس مینوز برگ سبزی Liriomyza trifolii (Burges) روی چکیده کاملدر این تحقیق تاثیر دماهای مختلف (15، 20، 25، 30 و 35 درجه سلسیوس) بر طول دوره رشد (تخم تا خروج حشره کامل)، طول عمر حشره کامل ماده و میزان پارازیتیسم زنبور Closterocerus formosus Westwood به عنوان یکی از دشمنان طبیعی مهم مگس مینوز برگ سبزی Liriomyza trifolii (Burges) روی گیاه لوبیا (رطوبت 5 ± 60 درصد و دوره نوری 16 ساعت روشنایی و 8 ساعت تاریکی) بررسی شد. با بالا رفتن دما طول دوره رشدی زنبور نیز کاهش می یابد به طوری که میانگین طول دوره رشدی زنبور از تخم تا خروج حشره کامل در دماهای مورد آزمایش به ترتیب 2/53، 6/27، 4/15، 6/9 و 2/7 روز بود. همین طور با افزایش دما متوسط طول عمر حشرات ماده بالغ کوتاه تر شدند. طول عمر زنبورهای ماده به ترتیب 27، 1/23، 4/22، 8/19 و 6/17 روز و تعداد میزبان های کشته شده (به وسیله پارازیتیسم و تغذیه از میزبان) به ترتیب 4/37، 8/197، 5/349، 4/324 و 5/296 عدد بدست آمد. رابطه بین دما و نرخ رشد پارازیتوئید با مدل رگرسیون خطی تطابق نشان داد. با استفاده از این مدل پائین ترین آستانه دمایی رشد زنبور 5/13درجه سلسیوس و نیاز دمایی از تخم تا ظهور حشره کامل 66/166 روز- درجه محاسبه گردید. پرونده مقاله -
دسترسی آزاد مقاله
146 - A Second-Order Accurate Numerical Approximation for Two-Sided Fractional Boundary Value Advection-Diffusion Problem
Elyas Shivanian Hamid Reza KhodabandehloFractional order partial differential equations are generalization of classical partialdifferential equations. Increasingly, these models are used in applications such as fluid flow, financeand others. In this paper we examine some practical numerical methods to solve a چکیده کاملFractional order partial differential equations are generalization of classical partialdifferential equations. Increasingly, these models are used in applications such as fluid flow, financeand others. In this paper we examine some practical numerical methods to solve a class of initial-boundary value fractional partial differential equations with variable coefficients on a finite domain. An approach based on the classical Crank-Nicolson method combined with spatial extrapolation is used to obtain temporally and spatially second-order accurate numerical estimates. Stability, consistency, and convergence of the method are examined. It is shown that the fractional Crank-Nicolson method based on the shifted Gr"{u}nwaldformula is unconditionally stable. Some numerical examples are presented and compared with the exact analytical solutionfor its order of convergence.Fractional order partial differential equations are generalization of classical partialdifferential equations. Increasingly, these models are used in applications such as fluid flow, financeand others. In this paper we examine some practical numerical methods to solve a class of initial-boundary value fractional partial differential equations with variable coefficients on a finite domain. An approach based on the classical Crank-Nicolson method combined with spatial extrapolation is used to obtain temporally and spatially second-order accurate numerical estimates. Stability, consistency, and convergence of the method are examined. It is shown that the fractional Crank-Nicolson method based on the shifted Gr"{u}nwaldformula is unconditionally stable. Some numerical examples are presented and compared with the exact analytical solutionfor its order of convergence. پرونده مقاله -
دسترسی آزاد مقاله
147 - A New Method for Solving Two-Dimensional Fuzzy Fredholm Integral Equations of The Second Kind
Mohsen Darabi Nouredin Parandin Mahmoud Paripour Ali SeifiIn this work, we introduce a novel method for solving two-dimensional fuzzy Fredholm integral equationsof the second kind (2D-FFIE-2). We use new representation of parametric form of fuzzy numbers and converta two-dimensional fuzzy Fredholm integral equation to system o چکیده کاملIn this work, we introduce a novel method for solving two-dimensional fuzzy Fredholm integral equationsof the second kind (2D-FFIE-2). We use new representation of parametric form of fuzzy numbers and converta two-dimensional fuzzy Fredholm integral equation to system of two-dimensional Fredholm integral equationsof the second kind in crisp case. We can use Adomian decomposition method for nding the approximationsolution of the each equation, hence obtain an approximation for fuzzy solution of 2D-FFIE-2. We prove theconvergence of the method and nally apply the method to some examples پرونده مقاله -
دسترسی آزاد مقاله
148 - Application of semi-analytic method to compute the moments for solution of logistic model
MohammadAli JafariThe population growth, is increase in the number of individuals in population and it depends on some random environment effects. There are several different mathematical models for population growth. These models are suitable tool to predict future population growth. One چکیده کاملThe population growth, is increase in the number of individuals in population and it depends on some random environment effects. There are several different mathematical models for population growth. These models are suitable tool to predict future population growth. One of these models is logistic model. In this paper, by using Feynman-Kac formula, the Adomian decomposition method is applied to compute the moments for the solution of logistic stochastic differential equation. پرونده مقاله -
دسترسی آزاد مقاله
149 - Poison process with fuzzy parameter
Abolfazl SaeidifarThis paper, introduces the fuzzy poisson process that plays an important role in the fuzzy sets and systems; specially, The spatial Poisson point process features prominently in spatial statistics, stochastic geometry, and continuum percolation theory. This point proces چکیده کاملThis paper, introduces the fuzzy poisson process that plays an important role in the fuzzy sets and systems; specially, The spatial Poisson point process features prominently in spatial statistics, stochastic geometry, and continuum percolation theory. This point process is appliedin various physical sciences such as a model developed for alpha particles being detected. In recent years, it has been frequently used to model seemingly disordered spatial configurations of certain wireless communication networks.For example, models for cellular or mobile phone networks have been developedwhere it is assumed the phone network transmitters, known as base stations, are positioned according to a homogeneous Poisson point process. پرونده مقاله -
دسترسی آزاد مقاله
150 - New solution of fuzzy linear matrix equations
Mahmood OtadiIn this paper, a new method based on parametric form for approximate solu-tion of fuzzy linear matrix equations (FLMEs) of the form AX = B; where Ais a crisp matrix, B is a fuzzy number matrix and the unknown matrix X one,is presented. Then a numerical example is presen چکیده کاملIn this paper, a new method based on parametric form for approximate solu-tion of fuzzy linear matrix equations (FLMEs) of the form AX = B; where Ais a crisp matrix, B is a fuzzy number matrix and the unknown matrix X one,is presented. Then a numerical example is presented to illustrate the proposedmodel. پرونده مقاله -
دسترسی آزاد مقاله
151 - English-Persian Word Formation with an Eye on Culture and Thought Effects
Ebrahim Abedi Lotfollah Yarmohamadi Naser RashidiThis research aims to introduce culture and thought -within Whorfian hypothesis-of the target language to EFL learners and helps them get a deeper idea over the root and reference of words and thereby keep them longer in memory. To test the hypothesis Orwell’s Ani چکیده کاملThis research aims to introduce culture and thought -within Whorfian hypothesis-of the target language to EFL learners and helps them get a deeper idea over the root and reference of words and thereby keep them longer in memory. To test the hypothesis Orwell’s Animal Farm was chosen along with two translations in Persian as well as a Persian short story titled Ahu-ye Kuhi . Required data were extracted from the aforesaid books with no sampling procedure applied but the whole books were taken into consideration. The researchers made use of syntactic discussions like grammatical gender in addition to semantic domains like colors, planets, flowers, religion, and others in a contrastive way. Any word signaling one of these domains was highlighted and analyzed through examples. The domains revealed a high rate of effect on the formation of words both in English and Persian with basic changes in between. It was concluded that the roles of thought and cultural domains on the vocabulary systems of the two languages are effective and crucially important particularly in that EFL learners get familiar with the culture and thinking styles of the target language which paves the way for learning the language easier. پرونده مقاله -
دسترسی آزاد مقاله
152 - بررسی اثر سیلیکون و فرمولاسیونهای آن بر روی پارامترهای بیولوژیکی و تراکم کنه تارتن دو نقطهای(Tetranychus urticae) روی پنج رقم لوبیا
هدی رضائی شیلا گلدسته الهام صنعتگر امین نیک پیهدف از انجام این تحقیق بررسی اثر سیلیکون و فرمولاسیون های آن بر روی پارامترهای بیولوژیکی و تراکم کنه تارتن دونقطه ای (Tetranychus urticae) روی پنج رقم لوبیا است. روش تحقیق مطالعات آزمایشگاهی است که در قالب طرح فاکتوریل (فاکتور اول رقم لوبیا و فاکتور دوم نوع سیلیکون مصرف چکیده کاملهدف از انجام این تحقیق بررسی اثر سیلیکون و فرمولاسیون های آن بر روی پارامترهای بیولوژیکی و تراکم کنه تارتن دونقطه ای (Tetranychus urticae) روی پنج رقم لوبیا است. روش تحقیق مطالعات آزمایشگاهی است که در قالب طرح فاکتوریل (فاکتور اول رقم لوبیا و فاکتور دوم نوع سیلیکون مصرفی) اجرا می گردد. ارقام لوبیا مورد آزمایش شامل 5 رقم لوبیا قرمز، چشم بلبلی، سفید، چیتی و سیاه می باشند. جهت انجام آزمایش برای هر رقم لوبی 20گلدان در نظر گرفته شده است (جمعاً 100 گلدان). ترکیبات سیلیکونی مورد استفاده در آزمایشات شامل کود مایع بر پایه سیلیکون، سیلیکات پتاسیم مایع، سیلیکات کلسیم پودری است. از هر 20 گلدان مربوط به یک رقم لوبیا 5 گلدان به عنوان شاهد در نظر گرفته شده و روی 5 گلدان سیلیکات پتاسیم مایع، روی 5 گلدان دیگر سیلیکات کلسیم پودری و در نهایت روی 5 گلدان آخر کود مایع بر پایه سیلیکون استفاده گردید. سپس از هر گلدان 10 برگ در یک پتری دیش قرار گرفته و روی برگ ها به تعداد مساوی 50 کنه های بالغ نر و ماده قرار داده شده است و پتری ها در دستگاه انکوباتور با دمای 5±25 درجه سلسیوس و رطوبت نسبی 10±60 درصد قرار داده شدند. سپس طی 18 روز، تعداد کنه بـالغ در رو و پشت کلیه ی برگ های هر پتری و تعداد تخم در رو و پشت آن ها با کمـک میکروسـکوپ تشریحی شمارش گردیدند و پارامترهای بیولوژیکی و درصد زنده مانی هر یک از مراحل رشدی کنه های موجود در هر رقم لوبیا تحت ترکیب سیلیکونی خاص تا مرگ آخرین کنه مورد مطالعه قرار گرفتند. به منظور تجزیه و تحلیل اطلاعات از نرم افزار23 SPSS و برای رسم نمودارهای جداول با استفاده از نرم افزار Excel استفاده گردید. نتایج پژوهش بیانگر آن است که به ترتیب بیشترین تأثیر استفاده از سیلیکون و فرمولاسیون های آن در پرورش لوبیا شامل کود مایع بر پایه سیلیکون، سیلیکات پتاسیم مایع، سیلیکات کلسیم پودری است که باعث کاهش نسبت بقاء یا زنده مانی و امید به زندگی و کاهش تبدیل تخم به لارو، و تبدیل لارو به پوره و تبدیل پوره به کنه شده است. پرونده مقاله -
دسترسی آزاد مقاله
153 - Geometric and kinematic analysis of Dorbadam anticline, North of Quchan, Iran
Hamidreza Afkhami Ardakani Farzin Ghaemi Behnam RahimiThe geometric and kinematic analyzing of the anticlines and their relation with the large-scale structures are used to determine the structural evolution of the area. The Dorbadam anticline is located in the Kopet-Dagh structural zone, 45 km due north of Quchan and on t چکیده کاملThe geometric and kinematic analyzing of the anticlines and their relation with the large-scale structures are used to determine the structural evolution of the area. The Dorbadam anticline is located in the Kopet-Dagh structural zone, 45 km due north of Quchan and on the Razavi and North Khorasan provinces border. The field study and geometric analysis indicate that the Dorbadam anticline has two culminations with an en-echelon arrangement and different structural evolution. The NW culmination (DA.1) is analyzed as a fault propagation fold geometry, while the SE culmination is known as a simple folding. The axial trend of the Dorbadam anticline has been changed and shows harmonic and Horizontal inclined, 1C subclass of Ramsay's classification, close, asymmetrical over fold in DA.1 part; upright and horizontal, open and symmetrical upright fold in DA.2 part. Aspect ratio on the Dorbadam anticline is 0.64 and has a parabolic appearance. The joint study revealed the existence of five major joints in this area which are bedding and strike joints (tension and compression joints parallel to the axial fold) or dipping joints (tension joints). The systematic joints analyzing of Tirgan Formation with T-Tecto software determined that the trend of maximum stress in the Cretaceous was S07W. The paleo-stress direction determined S25W with axial plane analysis. The Analysis of large-scale faults indicated a change in the stress direction during the time and specified they are post-tectonic and the activity of faults occurred in some various stress systems. پرونده مقاله -
دسترسی آزاد مقاله
154 - The study of post depositional history in the Chehel Kaman formation, in the eastern regions of Kopet-Dagh, North-East Iran
Somayeh Erfani Mohammad Javanbakht Mehdireza PoursoltaniThe Chehel Kaman Formation of the upper Paleocene age formed from carbonate and siliciclastic sediments is located, in the Kapeh Dagh Sedimentary Basin. Two sections where considered for the purpose of research into the effective diagenetic processes of this formation. چکیده کاملThe Chehel Kaman Formation of the upper Paleocene age formed from carbonate and siliciclastic sediments is located, in the Kapeh Dagh Sedimentary Basin. Two sections where considered for the purpose of research into the effective diagenetic processes of this formation. The Cheshmeh Qorban section with a thickness of 270.8m located 140km down the Mashhad – Sarakhs Highway while the Shourlog Section with a thickness of 288.3m is situated 130km down the Mashhad – Mozduran – Sarakhs Highway. 120 samples were taken from these sections and 100 thin cross sections produced from these samples. The carbonate rocks of this formation have been affected by diagenetic processes such as cementation, micritization, neomorphism, dissolution stress and porosity. These processes have taken place at the four marine diagenetic stages of the underground and surface sweet water. All cross sections were investigated using a gypsum bladein order to identify any extant porosity. All changes including type and percentage were plotted for each section. The results of the investigations indicated that in the Cheshmeh Qorban section of the Chehel Kaman Formation the lowest porosity content with a 3% rate of recurrence was related to microporosities while the greatest accumulation of porosity with a 7% recurrence rate in porosity was due to fracture porosity. In the Shourlog section meanwhile the lowest porosity content with a 2% recurrence rate was related to microporosities and the greatest accumulation with a recurrence rate of 6% was due to vuggy porosity. پرونده مقاله -
دسترسی آزاد مقاله
155 - Lithostratigraphy ,biostratigraphy of Paleocene-lower Eocene squences in Dezful embeyment, South West Iran
Fatemeh Moradian Darioush BaghbaniPaleocene and Lower Eocene deposits in SW Iran are known as Pabdeh formation.Pabdeh formation is one of the most important lithostratigraphy unit as source rock has been deposited in Zagros basin over an extremely long period in time. The area under research is the Ghac چکیده کاملPaleocene and Lower Eocene deposits in SW Iran are known as Pabdeh formation.Pabdeh formation is one of the most important lithostratigraphy unit as source rock has been deposited in Zagros basin over an extremely long period in time. The area under research is the Ghachsaran 55 subsurface Section located from the Ghachsaran oil field in Dezful embeyment in zagros fold zone. The Lower boundry of this formation around Ghachsaran basin is identified by Gurpi formation. Study on lithostratigraphy of Paleocene and lower Eocene deposits have been led to the separation following units: clay limestone section in gray colour,11m in thickness, clay limestone section 18m in thickness containing chert inter layers, silt clay limestone section 3m in thickness, The clay limestone section 3m in thickness containing chert interlayers, clay limestone section 4m in thickness . biostratigraphy investigation of Pabdeh formation have been led to the identification of 39 species and 9 genera of foraminifers.In addition , basis of Paleocene- Early Eocene planktonicforamimnifers bioevent in Wade biozonation such as Morozovella velascoensis, Globanomalina pseudomenardii, Psudohastigerina wilcoxensis, Acarinina soldadoensis , Morozovella subbotinae , Morozovella formosa , 9 biozones and 4 subzones are recogenized and these correlated with oldest biozones of (Wynd 1965) Beside,the bio-boundary of Paleocene and early Eocene is identified based on (Wade et al. 2011). پرونده مقاله -
دسترسی آزاد مقاله
156 - Microfacies, Sequence stratigraphy, Facies analysis and Sedimentary environment of Neocomian in Kuh-e-Siah section (Arsenjan area, SW of Iran)
Masoud Abedpour Massih Afghah Vahid Ahmadi Mohammad Sadegh DehghanianIn the present research Kuh-e Siah Section in the Northeast of Shiraz in the Interior Fars, was investigated to study microfacies, sequence stratigraphy, facies analysis and sedimentary environment of Fahliyan Formation. Generally, 345 meters of these sediments were stu چکیده کاملIn the present research Kuh-e Siah Section in the Northeast of Shiraz in the Interior Fars, was investigated to study microfacies, sequence stratigraphy, facies analysis and sedimentary environment of Fahliyan Formation. Generally, 345 meters of these sediments were studied by investigating 240 thin sections. In this study, the indicator microfacies were accurately identified which include Mudstone, Wackestone, Packstone and Grainstone. Besides, skeletal and non-skeletal grains of these microfacies are Intraclast, Bioclast, Exteraclast and Peloid. According to lithostratigraphic study, underneath limit of Fahliyan Formation with the Surmeh Formation and its upper contact with Gadvan Formation were in the gradual form (SB2) and included (TST-LST-Early HST-Late HST) system tracts. In general, there were two second-degree sequences in this section., According to the analysis of the sedimentary environment, the The lowermost of the Fahliyan Formaion is comprised of the Inner shelf deposit Which changes to Open marine sediments (with homoclinal type) And eventually terminates to outer shelf deposit. Based on the received micropaleontologic data, the age determination of the Fahliyan Formation Is assigned to Neocomian. پرونده مقاله -
دسترسی آزاد مقاله
157 - Microbiostratigraphy and Sequencestratigraphy of the Gurpi Formation in central part of Lorestan zone, SW Iran
Ghamarnaz Darabi Iraj Maghfouri Moghaddam Abbas Sadeghi Bijan YusefiGurpi Formations is well distributed along Zagros Foreland Basin particularly in the north west of the Zagros (Lurestan Province). For Microbiostratigraphy and Paleobathymetric studies of the Gurpi Formation in the central part of Lurestan two stratigraphic sections inc چکیده کاملGurpi Formations is well distributed along Zagros Foreland Basin particularly in the north west of the Zagros (Lurestan Province). For Microbiostratigraphy and Paleobathymetric studies of the Gurpi Formation in the central part of Lurestan two stratigraphic sections including Soltan and Amiran sections were selected. In this study, 48 foraminiferal species belonging to 25 genera were identified, and 7 biozones were recognized; Globotruncanita elevata Taxon Range Zone, Globotruncana ventricosa Interval Zone, Radotruncana calcarata Taxon Range Zone, Globotruncanella havanensis Partial Range Zone, Globotruncana aegyptiaca Interval Zone, Gansserina gansseri Interval Zone, Contusotruncana contusa Interval Zone. Planktonic foraminiferal morphology was studied in order to assign paleobathymetry and the sequences stratigraphic course of the Gurpi Formation. Three third-order sequences were identified, on the basis of deepening and shallowing patterns in the morphological changes and the distribution of the Gurpi Formation planktonic foraminifers and planktic/benthic (P/B).Key words:Biostratigraphy, Planktic foraminifera, Gurpi Formation, Lorestan, Paleobathymetry پرونده مقاله -
دسترسی آزاد مقاله
158 - Age, microfacies and sedimentary environments of the Sirenia-bearing deposits of the Qom Formation in Central Iran
Fatemeh Morovati Majid Mirzaie Ataabadi Mehran Arian Afshin Zohdi Mohsen Al-e AliSea cows are exceptional fossil vertebrates recently discovered in the deposits of the Qom Formation. Yet, the Sirenia-bearing limestones are still poorly understood in terms of detail paleoenvironmental and micropaleontological investigations. In order to distinguish t چکیده کاملSea cows are exceptional fossil vertebrates recently discovered in the deposits of the Qom Formation. Yet, the Sirenia-bearing limestones are still poorly understood in terms of detail paleoenvironmental and micropaleontological investigations. In order to distinguish the temporal and paleoenvironmental context of the Sirenia (sea cow) bearing deposits of the Qom Formation in central Iran, three stratigraphic sections were studied in Hamedan (Ivak and Shirinsu) and Isfahan (Chahriseh) provinces. A total number of 47 thin sections were studied for micropaleontology, biozonation and carbonate microfacies analysis, as well as sedimentary environment recounstruction. Biostratigraphical investigations suggest that the Sirenia-bearing deposits are Aquitanian/Burdigalian in age, which implies restriction of sea cows remains to the Lower Miocene. We recognized nine microfacies (n=8 correspond to carbonate; n=1 correspond to siliciclastic) in the study areas. They are systematically grouped into two microfacies settings, representing inner and middle ramp environments. This is based on the facies associations and the distribution of skeletal components and rock textures. The Sirenia-bearing limestone consists of peloid/algae bearing wackstone/packstone/floatstone. A carbonate (inner) ramp system under shallow water conditions is interpreted as the habitats of the Sirenian mammals during the Aquitanian/Burdigalian in Central Iran. This paleoenvironmental setting could be utilized for further exploration of Qom Formation deposits for discovering sea cows. پرونده مقاله -
دسترسی آزاد مقاله
159 - Porosity evolution and diagenetic history of the upper Jurassic Mozduran Formation, eastern Kopet-Dagh Basin, NE Iran
Mehdi Reza Poursoltani Mahin Hrati SabzvarThe Upper Jurassic carbonates of the eastern part of the Kopet-Dagh Basin, with thickness of 470 m, are the major gas-bearing reservoir in NE Iran. The objectives of this study are recognition of diagenetic history and estimation of porosity related to dolomitization. B چکیده کاملThe Upper Jurassic carbonates of the eastern part of the Kopet-Dagh Basin, with thickness of 470 m, are the major gas-bearing reservoir in NE Iran. The objectives of this study are recognition of diagenetic history and estimation of porosity related to dolomitization. Based on field and laboratory study, four carbonate facies associations have been identified at the Mazdavand outcrop. Most of the carbonate rocks were deposited in an open marine, tidal channel and barrier, lagoon and tidal flat setting. Using petrographic and CL analyses, the main diagenetic processes that affected these rocks are micritization, cementation, compaction, fracturing, dissolution, neomorphism, silicification, and dolomitization. Dissolution of grains and calcite cement generated secondary porosity, whereas compaction and cementation are the primary cause of porosity reduction. The average porosity of core plugs is 15.78% and match well with two-dimensional estimates from thin sections. The more porous samples are either highly fractured or contain interparticle and intercrystalline porosity, within the lower strata that contain more dolostone. پرونده مقاله -
دسترسی آزاد مقاله
160 - Neocomian Fahliyan formation carbonates in the oil well X2 (Dorood oil field, Persian Gulf): Biostratigraphic data from benthic foraminifera and algae
لیلا رستمی سیدحمید وزیری داود جهانی علی سلگی مرتضی طاهرپور خلیل آباد ایوانا زورن گراویک احمد یحیاییThe Fahliyan Formation of the Khami Group is the most important oil and gas reservoir in southwestern Iran. The formation attains a thickness of 435.5 m in the oil well X2 in Dorood oil field, Persian Gulf. It is represented mainly by thin-bedded limestones. This format چکیده کاملThe Fahliyan Formation of the Khami Group is the most important oil and gas reservoir in southwestern Iran. The formation attains a thickness of 435.5 m in the oil well X2 in Dorood oil field, Persian Gulf. It is represented mainly by thin-bedded limestones. This formation unconformably overlies the evaporate late Jurassic Hith Formation and conformably underlies the Gadvan Formation. Integrated palaeontological and sedimentological studies supported by an analysis of 150 thin-sections led to the identification of 21 benthic foraminiferal genera dominated by agglutinated forms with an additional 8 algal genera. Two foraminiferal biozones of Berriasian through Hauterivian age include the Pseudochrysalidina (Dokhania) arabica acme zone and Pseudocyclammina lituus- Coscinoconus assemblage zone, and an algal zone includes the Salpingoporella annulata range zone have been recognized. The correlation of the lower Cretaceous petroleum source rock in the Persian Gulf with regions from Tethyan Realm is limited by the lack of the analog formation that can be used for comparison. In this way, the foraminiferal zones are correlated with coeval zones in south and southwest of Iran. پرونده مقاله -
دسترسی آزاد مقاله
161 - Seismic and sequence stratigraphy of the Oligocene-Miocene Asmari reservoir in the Marun oilfield, SW Iran
Jalil Jafari Asadollah Mahboubi Reza Moussavi-HaramiThe Oligocene-Lower Miocene Asmari Formation shows considerable reservoir heterogeneity because of variations in the lithology, depositional facies and diagenesis. This paper aim to investigate reservoir heterogeneities using seismic, core and well logs data. Twelve car چکیده کاملThe Oligocene-Lower Miocene Asmari Formation shows considerable reservoir heterogeneity because of variations in the lithology, depositional facies and diagenesis. This paper aim to investigate reservoir heterogeneities using seismic, core and well logs data. Twelve carbonate microfacies and three siliciclastic petrofacies are identified in the Asmari Formation based on well log and core data from 7 wells in the Marun field, which generally indicate a shallowing-up profile. Microfacies changes suggest that the Asmari Formation was deposited in a restricted lagoonal and carbonate ramp setting with periodic clastic sediment supply due to relative sea level fall. Six third-order sequences are recognized in the Asmari Formation from studies of core and well log data, while interpretation of 3D seismic data shows that the formation consists of two second-order seismic sequences. The lowest sequence boundary between the Pabdeh and Asmari Formations (SBI) is a type-2 boundary, and the six others are type-1 sequence boundaries. Six distinct packages of reflectors are interpreted on seismic data through the Cenozoic. The Pabdeh and Asmari Formations can be divided into three packages. Package 1 corresponds to transgressive and highstand systems tract deposits, which mainly consist of shales, marls, and carbonates with interbedded sandstones. This package is overlain by mounded and lenticular seismic facies (package 2) and high-amplitude and continuous seismic reflectors (package 3). Package 2 is predominantly sandstone with interbedded shale, and package3 mainly consists of carbonates. Inversion of seismic data shows that high-porosity zones are present in the western and southern Marun field. A lower high-porosity zone corresponds to lowstand fluvial-deltaic sediments and the upper zone to the beach and shallow marine sandstones. پرونده مقاله -
دسترسی آزاد مقاله
162 - Depositional environment and microfacies analysis: An example of the Asmari Formation in West Zagros Basin, Lorestan province (Iran)
Mohammad Rajabi Saeedeh Senemari Mahnaz Parvaneh Nejad Shirazi Maryamnaz Bahrammanesh TehraniThe carbonate sequence of the Asmari Formation is the most important oil reservoir formed in the Zagros Basin, southwestern Iran. In order to interpret the sedimentary environment, the Makhmal-Kuh and Kaka-Reza sections in the Lorestan province were investigated. These چکیده کاملThe carbonate sequence of the Asmari Formation is the most important oil reservoir formed in the Zagros Basin, southwestern Iran. In order to interpret the sedimentary environment, the Makhmal-Kuh and Kaka-Reza sections in the Lorestan province were investigated. These sections were compared with some other outcrops in the Zagros Basin. Twenty one genera and species were identified in the Makhmal-Kuh section, and 20 genera and species in the Kaka-Reza section. Among foraminifera, Miogypsina sp ., Amphistegina sp., Elphidium sp., Operculina sp., Nephrolepidina sp., Eulepidina sp., Heterostegina sp., Nummulites fichtelli, Nummulites vascus and Nummulites intermedius are the most important species. Based on the identification of co-occurrence taxa, two assemblage zones are introduced in the Makhmal-Kuh section, and one faunal assemblage zone in the Kaka-Reza section. Petrographic analysis also led to the recognition of twelve microfacies types in the Makhmal-Kuh section and five microfacial types in the Kaka-Reza section. Based on these microfacial types, three sub-environments were determined in the Makhmal-Kuh section and two settings in the Kaka-Reza section: Outer ramp, in the aphotic zone, dominated by planktic foraminifera, bryozoan, and echinoids; the mid ramp, in the oligophotic zone, characterized with benthic foraminifera and planktic foraminifera; the shallower waters of the mesophotic-euphotic zone dominated by benthic foraminifera and coralline red algae in the inner ramp. Therefore, the depositional sub-environments along with biotic assemblages represent warm waters of tropical regions under photic variable conditions in a homoclinal ramp. Based on the distribution of co-occurrence fossils, the Asmari Formation is dated as Rupelian to the Aquitanian. پرونده مقاله -
دسترسی آزاد مقاله
163 - Biostratigraphy and depositional architecture of the Kazhdumi formation (Aptian-Albian) in the Izeh zone, Zagros mountains, SW Iran
Asiyeh Arampour Massih Afghah Mahnaz Parvaneh ShiraziIn the easternmost part of the Izeh Zone of the Zagros Mountains, the Kazhdumi Formation of upper Aptian-middle Albian interval is superbly exposed in three-main exposures as argillaceous carbonate facies. The main bioclastic components of the Kazhdumi Formation are Orb چکیده کاملIn the easternmost part of the Izeh Zone of the Zagros Mountains, the Kazhdumi Formation of upper Aptian-middle Albian interval is superbly exposed in three-main exposures as argillaceous carbonate facies. The main bioclastic components of the Kazhdumi Formation are Orbitolinid and other larger benthic foraminifers, planktonic foraminifera and calcareous algae. The depositional system in the study area during the upper Aptian-middle Albian corresponds to a shaly carbonate ramp. Two depositional sequences are determined, as prograding system from west to east. Comparison of the proposed depositional sequences with those reported in the Arabian Plate and adjacent areas suggests a correlation with the global sea-level curve. The Lower Cretaceous, Aptian carbonates of Kazhdumi Formation contain nine microfacies, which were deposited on a ramp system deepened in both directions (west and east). Stratigraphic sequence led to recognize two third-order sequences. On the other hand, rudstone and boundstone lithofacies of the studied formation have higher reservoir potential and were deposited during Apt 3 and Apt 5 sequences of the Arabian Plate. The Kazhdumi Formation in the study area was deposited in an intrashelf basin that should be classified as an independent basin in the future paleogeographic maps of the southwest Iran. We interpret the Kazerun Fault, as a crustal warping of basement faults of the Arabian Plate boundary, which were responsible for the creation of the intrashelf basin in the study area. پرونده مقاله -
دسترسی آزاد مقاله
164 - Facies analysis, depositional environment and sequence stratigraphy of the Permian Ruteh Formation in north of Mahabad (NW Iran)
Youssef Mohammadi Moghaddas Rahim Mahari Rahim Shabanian Adel NajafzadehThe Permian Ruteh Formation is known as one of the most significant successions in northwestern Iran. In the studied area it exposed a thick succession (201 m) of medium to thick-bedded carbonate sedimentary rocks in the west of Kuseh-Kahrizeh village in the north of Ma چکیده کاملThe Permian Ruteh Formation is known as one of the most significant successions in northwestern Iran. In the studied area it exposed a thick succession (201 m) of medium to thick-bedded carbonate sedimentary rocks in the west of Kuseh-Kahrizeh village in the north of Mahabad city. This formation unconformably overlain the Cambrian Mila Formation and it is unconformably underlain by the Oligo-Miocene Qom Formation The laboratory studies on the thin sections led to the identification of 15 microfacies that are arranged in three facies associations: inner ramp, mid-ramp and outer ramp. The petrographic results and facies analysis demonstrate that the depositional environment of Ruteh Formation in the studied area exhibits the characteristics of a homoclinal carbonate ramp platform of a gentle slope. This platform is mainly composed of supratidal, intertidal, lagoon, shoal, open marine, mid-ramp, and outer ramp environments. According to facies frequency analysis, the lagoon environment accounts for the highest abundance of facies (33%), whearas the outer ramp environment shows the least abundance (2%).Vertical distribution analysis of sedimentary facies led to the identification of transgressive and regressive depositional patterns. Accordingly, a total of 4 depositional sequences of third-order, 5 sequence boundaries and 4 maximum flooding surfaces were identified. The boundaries between all sequences are identified as SB1. پرونده مقاله -
دسترسی آزاد مقاله
165 - Biostratigraphy, Paleoecology, Microfacies and Depositional environment of the Asmari formation (Oligocene-Early Miocene) in Karanj oil field, SW Iran
Behzad Saeedi RazaviCore data analysis of one well from the Karanj oil field, southwestern Iran, allowed us to precise the biostratigraphy, microfacies and paleoecology of the Asmari Formation. Analysis of thin section from this cored well permitted identification of 28 genera and 20 speci چکیده کاملCore data analysis of one well from the Karanj oil field, southwestern Iran, allowed us to precise the biostratigraphy, microfacies and paleoecology of the Asmari Formation. Analysis of thin section from this cored well permitted identification of 28 genera and 20 species of benthic and planktic foraminifera respectively. Subsequently four benthic foraminiferal assemblage biozones were identified, as follows: (1) Lepidocyclina-Operculina-Ditrupa Assemblage zone, (2) Archaias asmaricus-Archaias hensoni-Miogypsinoides complanatus Assemblage zone, (3) Miogypsina-Peneroplis farsensis–Elphidium sp. 14 Assemblage zone and (4) Borelis melo curdica-Borelis melo melo Assemblage zone; indicating an Oligocene (Rupelian-Chattian) to early Miocene (Aquitanian to Early Burdigalian) age for the Asmari Formation. Microfacial study of depositional textures led to characterizing 12 microfacies types, indicating environments in five different settings: restricted lagoon, open lagoon, shoal, slope, and basin mostly in the upper Asmari Formation. These sediments had been deposited under 3 different salinity levels (from 34 to more than 50 psu) in an environment ranging from aphotic to oligophotic and to euphotic zones, and under oligotrophic to eutrophic conditions from the Chattian to the Burdigalian on a carbonate platform (homoclinal ramp). In the studied well, the Asmari Formation had been deposited in a marine environment with normal salinity during the Rupelian-Chattian interval and in a marine environment with high salinity during the Aquitanian to the Burdigalian times. پرونده مقاله -
دسترسی آزاد مقاله
166 - Sedimentological and provenance analysis of the Cretaceous Moro formation Rakhi Gorge, Eastern Sulaiman Range, Pakistan
Muhammad Khan Shahid Ghazi Mubashir Mehmood Abdollah Yazdi Abbas Ali Naseem Umair Serwar Arsalan Zaheer Hadayat UllahThe Cretaceous Moro Formation from the Rakhi Nala section Dera Ghazi Khan has been studied in detail to investigate the Sedimentology and provenance. This paper describes the litho-facies changes, depositional environment, and provenance analysis of the Cretaceous Moro چکیده کاملThe Cretaceous Moro Formation from the Rakhi Nala section Dera Ghazi Khan has been studied in detail to investigate the Sedimentology and provenance. This paper describes the litho-facies changes, depositional environment, and provenance analysis of the Cretaceous Moro Formation from the Rakhi Nala section, eastern Sulaiman Range. The studied Formation is 110-140 meters thick and consists mainly of fine to coarse-grained sandstone, with minor-siltstone, mudstone (claystone, shale), and limestone. The uppermost beds of the Moro Formation are consist of sandstone with iron types of cement. Twelve lithofacies have been identified based on a petrographic investigation related to the depositional environment of the Moro Formation ranging from deltaic to marine setting (Delta Plain-Delta front). Petrographic analysis of sandstone reveals the presence of quartz both, mono-crystalline and poly-crystalline, less feldspar; heavy minerals like hematite and magnetite, and glauconite were found in negligible amounts. Detrital mineral composition shows that in Moro Formation, the sandstone shows a litharenite. Modal composition of the sandstone from the QFL diagram was Q 66% F 0.3% L 33.7% and that of the QmFLt diagram was QM, 57% F 0.23% L 43.77%. The overall average composition is Q 61.5% F 0.27% L 38.7%. A total of 37 thin-sections are studied for provenance analysis, out of which twenty-seven samples are considered as Litharenite (this shows recycled, or craton interior origin), eight Quartz arenite categories are identified and two samples are fall in the sublitharenites category (Quarts recycled source area). پرونده مقاله -
دسترسی آزاد مقاله
167 - Geochemistry and diagenetic evidence of middle-late Permian deposits, Northern Iran
Alireza Chegini Iraj Maghfouri Moghaddam Mohamahosein Adabi Masoud LotfpourThis study provides a evaluation of the initial carbonate mineralogy, and diagenetic condition of the Ruteh Formation, a middle-late Permian carbonate sequence, in the Emarat section in Central Alborz, northern Iran. 200 samples were examined for petrographical contents چکیده کاملThis study provides a evaluation of the initial carbonate mineralogy, and diagenetic condition of the Ruteh Formation, a middle-late Permian carbonate sequence, in the Emarat section in Central Alborz, northern Iran. 200 samples were examined for petrographical contents and thirty-four samples were collected for geochemical analysis. The high Sr and Na contents, Sr/Na>1, and the presence of dolomites and dissolution fractures are indicative aragonite early mineralogy. The diagenetic process in the Ruteh Fm. are an indication of the marine, meteoric and burial diagenetic environments. The original carbonate texture in the Ruteh Fm. are Severely affected by diagenetic process. The data obtained from the values of the Major (Ca and Mg), minor (Sr, Na, Fe, and Mn), oxygen and carbone isotopes show the initial aragonite composition of the Ruteh Fm. deposited in a subtropical shallow water. An open diagenetic system was indicated by changes in the values of Sr / Ca and δ18O vs. Mn. The shallow burial diagenetic temperature of the Ruteh carbonate was approximate 28.6°C with the maximum diagenetic temperature of 53.4°C. پرونده مقاله -
دسترسی آزاد مقاله
168 - Paleontology and taphonomy of Kuphus polythalamius (Linnaeus 1767), Navab anticline, Central Iran
Keyvan Khaksar Iraj Maghfouri MoghaddamThe Burdigalian carbonate of the Central Iran contains very well-preserved specimens of Kuphus polythalamius. The tube of Kuphus polythalamius is a calcareous secretion that enables Pelecypoda to live in the mud of shallow seas. This research focusses on the Paleontolog چکیده کاملThe Burdigalian carbonate of the Central Iran contains very well-preserved specimens of Kuphus polythalamius. The tube of Kuphus polythalamius is a calcareous secretion that enables Pelecypoda to live in the mud of shallow seas. This research focusses on the Paleontology and taphonomy of the Kuphus polythalamius of the Member F (Qom Formation) in the southeast of Kashan located in the Central Iran. The Member F is 60 meters thick and composed of medium bedded limestone. The scattering of the larger benthic foraminifera in the study area indicates the existence of the Borelis melo curdica-Borelis melo melo assemblage zone of Burdigalian age. The presence of Kuphus polythalamius among the porcelaneous foraminiferal and green algal assemblage demonstrate that carbonate generation happened in warm tropical to subtropical marine. The surface of some samples contains distinct horizons of beekite, indicating a break in sedimentation, which is expanded as a silica crust on carbonate tubes. پرونده مقاله -
دسترسی آزاد مقاله
169 - Biostratigraphy, microfacies and sedimentary environment of the Jahrum Formation in Chaharmahal Bakhtiari province, West of Iran
Bahman Javadian Seyed Ahmad Babazadeh Ali Solgi Burzu Asghari PirbalutiIn this research, the biostratigraphy, microfacies, and depositional environment of carbonate sediments of the Jahrum Formation will be investigated based on microscopic textures and the distribution of benthic foraminifera. The Jahrum Formation was measured from Kuh-e- چکیده کاملIn this research, the biostratigraphy, microfacies, and depositional environment of carbonate sediments of the Jahrum Formation will be investigated based on microscopic textures and the distribution of benthic foraminifera. The Jahrum Formation was measured from Kuh-e-Hamze Ali in the Chaharmahal Bakhtiari province (Zagros Basin, Iran). The biostratigraphic analysis of this formation has led to the detection of three biozones in this area. These biozones consist of Somalina subzone, Nummulites–Alveolina assemblage subzone, and Nummulites fabianii- Nummulites striatus assemblage subzone which assigned to Middle and Late Eocene. The Nummulites fabianii- Nummulites striatus assemblage subzone is represented for the first time in the studied area. Nine microfacies are identified based on their fossil content (mainly foraminifera) and sedimentary textures. They consist of Dolostone, Mudstone with quartz, Bioclast- miliolids wackestone/packstone, Praerhapydionina -miliolid wackestone, Alveolina -Nummulites-Orbitolites wackestone/packstone, Bioclast–miliolid-Rotalia wackestone/packstone, Bioclast-lump packstone/grainstone, Interaclast-bioclast-Alveolina wackestone/grainstone, and Bioclast-Nummulites wackestone/packstone. These facies were deposited in four major depositional environments from a tidal flat, lagoon, shoal, and open marine environmental settings. The depositional environment of the Jahrum Formation is interpreted as a carbonate ramp. پرونده مقاله -
دسترسی آزاد مقاله
170 - Facies analysis, sedimentation conditions and geochemistry of clastic deposits of Ashin formation (Late Ladinian-Early Carnian), Northeast of Nain, East of Central Iran
Payman Rezaee Mohammad Khanehbad Moasoumeh Ezatifar Seyedeh Akram Jooybari Kiamars HosseiniThe present study aims to investigate the petrographic, geochemical features, and depositional facies of the Late Triassic Ashin Formation (Nakhlak Group, central Iran). For this purpose, 100 thin sections, and 13 samples of fine-grained sedimentary rocks were analyzed چکیده کاملThe present study aims to investigate the petrographic, geochemical features, and depositional facies of the Late Triassic Ashin Formation (Nakhlak Group, central Iran). For this purpose, 100 thin sections, and 13 samples of fine-grained sedimentary rocks were analyzed for their petrographic and geochemical characteristics, taken from a 330-m thick section of this formation. The petrographic types identified in this formation include sandstone, siltstone and limestone. This study suggests limestone facies are deposited in upper parts of the distal submarine fan towards the shore, sandstone facies are deposited in the middle part of the distal submarine fan, and the shale facies are deposited in lower parts of the distal submarine fan towards the abyssal plain by turbidity currents. The plotting of petrographic data on ternary diagrams for compositional classification illustrate their composition as litharenites, sub-litharenites, and a few litharenite-feldspathic and shales. Discrete diagrams refer to a tectonic setting of a continental arc complex and the active continental margin. The results of the modal analysis and geochemical data indicate the orogenic re-cycling for these deposits. CIA and CIW indexes indicate moderate weathering of the source area under semi-arid to semi-humid climates. پرونده مقاله -
دسترسی آزاد مقاله
171 - Biostratigraphy and microfacies analysis of Gadvan Formation (late Barremian-early Aptian) in Coastal Fars zone, (Zagros, SW Iran)
Alireza Abtahian Massih Afghah Vahid AhamadiThe investigation of lithostratigraphy, biostratigraphy and the microfacies analysis of the Gadvan Formation as an oil reservoir of Lower Cretaceous in the Zagros Basin is crucial. In this study Naser Abad section (Coastal Fars region, SW of Iran), consists of 170 meter چکیده کاملThe investigation of lithostratigraphy, biostratigraphy and the microfacies analysis of the Gadvan Formation as an oil reservoir of Lower Cretaceous in the Zagros Basin is crucial. In this study Naser Abad section (Coastal Fars region, SW of Iran), consists of 170 meters thin to medium-bedded limestone with interbeds shale and marly limestone. According to stratigraphic distribution of identified foraminifers, two biozones are established which are: Paleorbitolina lenticularis zone and Hedbergella infracretacea Zone. Based on the investigated faunal assemblage, the age of Gadvan Formation is assigned to late Barremian-early Aptian. Microfacies studies led to the identification of five microfacies types which include: Algal-intraclast- bioclast wackestone, Intraclast- bioclast wackestone, Planktonic- bioclast wackestone, Radiolarian packstone and Orbitolina- bioclast wackestone. These microfacies show that the Gadvan Formation was deposited in both shallow water ramp and hemipelagic paleoenvironments. According to microfacies, carbonate platform of Gadvan Formation in the studied area corresponds to a moclinal platform which was affected by basement of Kazerun Fault zone. پرونده مقاله -
دسترسی آزاد مقاله
172 - Carbonate Sequence stratigraphy of Turonian Wadi Es Sir Formation in Irbid, north Jordan
Amer Al-jibouri Muthana Al-tharb Basim Al-kubaisiThis study investigates the Sequence stratigraphy and depositional environment of Wadi Es Sir Formation (Turonian) in Irbid City. The Wadi Es Sir Formation consists of thick bedded to massive limestone, dolomitic limestone and dolomite. Based on Petrographic study Eight چکیده کاملThis study investigates the Sequence stratigraphy and depositional environment of Wadi Es Sir Formation (Turonian) in Irbid City. The Wadi Es Sir Formation consists of thick bedded to massive limestone, dolomitic limestone and dolomite. Based on Petrographic study Eight facies wreeidentified in the studied sections These are mudstone, gastropoda peloidal packstone, algal-lithoclast wackestone to packstone, peloidal foraminifera wackestone to packstone, bioclastic wackestone to packstone foraminifera wackestone, rudist framestone and pelletal grainstone. These facies weredeposited on the followingenvironments: restricted marine, shallow open marine and shoal environments.Sequence stratigraphystudy in Wadi Es Sir Formation identified forth-order cycles which are asymmetrical and consist of transgressive systems tract (TST) represented by shallow open marine and sometime shoal facies, followed by highstand systems tract (HST) represented by restricted marine facies. They are bounded below by a transgressive surface (Ts) and above by marine flooding surface (mfs). They represent successive episodes of relative sea level rise and stillstands. The nature of these cycles (composition and symmetry) reflects the combined effect of local tectonics and eustasy. پرونده مقاله -
دسترسی آزاد مقاله
173 - The evaluation of Khyber limestone in Pakistan for using as road aggregate based on geotechnical properties
Naveed Rehman Syed Haroon Ali Zahid Ullah Muhammad Kashif Muhammad Arslan Abid Atif Saleem Amjad Ali Muhammad YaseenKhyber Formation of Paleozoic age, has been studied here to access its physiochemical and mechanical characteristics. There has been several studies on the sedimentology of the Khyber limestone, however, much more detailed study is required to understand it aggregate po چکیده کاملKhyber Formation of Paleozoic age, has been studied here to access its physiochemical and mechanical characteristics. There has been several studies on the sedimentology of the Khyber limestone, however, much more detailed study is required to understand it aggregate potential in desired resolution and precision. It is achieved by understanding the rock types, microscopic textures and physical/ mechanical properties. The Khyber Formation is widely exposed in eastern and central parts of district Khyber, Khyber Pakhtunkhwa (KP) Province, Pakistan. It is a thick bedded hard limestone unit. The carbonates in the Khyber Formation are dominated by calcite, with dolomite, and other accessory minerals as minor component. The mechanical and physical properties of aggregates like specific gravity (2.69), water absorption (0.80%), soundness (2.34%), Los Angeles abrasion value (23.60%), aggregate crushing value (12.18%), aggregate impact value (12.76%) flaky index (10.15%), elongation index (13.02%), California bearing ratio (90.35%), coating and stripping values (96.32%), Schmidt rebound attains (34.23) and compressive strength (38.58Mpa) are according to the available standards. The petrographic analyses of samples of Khyber Formation and energy dispersive X-Rays analysis (EDX) illustrate that it dominantly consists of calcite (88-92%) with small to trace assemblage of dolomite (2-8%), ungraded quartz (1-3%) and ores (1-2%). The chemical and petrographic examinations show that the limestone units of the Khyber Formation are inoffensive in terms of Alkali Silica Reaction (ASR) and Alkali Carbonate Reaction (ACR). These characteristics of the limestone units demonstrating that these deposits are potential aggregate for large-scale projects in the KP Province (Pakistan) and region. پرونده مقاله -
دسترسی آزاد مقاله
174 - Evaluation of slope disaster susceptibility based on GIS and three-level fuzzy evaluation method
Ming YangIn the past, the fuzzy evaluation model of slope stability is mainly two-level model, and the classification level is relatively single, which cannot map the influencing factors of slope disaster comprehensively and objectively. In order to improve the accuracy of evalu چکیده کاملIn the past, the fuzzy evaluation model of slope stability is mainly two-level model, and the classification level is relatively single, which cannot map the influencing factors of slope disaster comprehensively and objectively. In order to improve the accuracy of evaluation results, a three-level fuzzy hierarchy evaluation model for slope hazard is proposed. A total of 22 factors affecting slope stability in 4 categories and 9 sub-categories were selected to constitute the basic evaluation system. Taking the highway slope of the multi-line connecting line as an example, the weight was determined by AHP method, and the weight was adjusted by the back analysis of the typical highway slope. Finally, the stability of other highway slopes in the study area is evaluated on the spot, and use the information concentration formula to check, then the susceptibility level prediction of slope disasters in the whole section is realized based on GIS platform. The analysis results show that among the 77 highway slopes studied, unstable slopes account for 7.8% of the total slopes, less stable slopes account for 22.1%, quasi steady slopes account for 42.8% and steady slopes account for 27.3%. Therefore, the disaster prone zoning of highway slopes along the connecting line of Chengdu Mianyang double track line is obtained. In fuzzy comprehensive evaluation, information set formula can be used to modify the evaluation results to a more extent. In this study,compared with the second-level model, the accuracy of the three-level model improved by about 16.7%. پرونده مقاله -
دسترسی آزاد مقاله
175 - First report of the SardinellaSardinites (Heckel, 1850) in the Kond formation in the Saran area, Central Alborz in Iran
Saeedeh Senemari Leila Fazli Alireza CheginiInvestigating the fossil-bearing horizons of the Kond Formation in the Saran area resulted in the identification of Sardinellasardinites (Heckel 1850) belonging to the family of Clupeidae Bonaparte (1831) for the first time the east of Tehran province. Furthermore, bios چکیده کاملInvestigating the fossil-bearing horizons of the Kond Formation in the Saran area resulted in the identification of Sardinellasardinites (Heckel 1850) belonging to the family of Clupeidae Bonaparte (1831) for the first time the east of Tehran province. Furthermore, biostratigraphic analyses based on the presence of benthic and planktonic foraminifera in this area demonstrate that the sedimentary sequence including strata of conglomerate, tuff, shale, gypsum, limestone, and marl with a thickness of 376 m in the Saran area belongs to the Priabonian, which is discontinuously located on Middle Eocene green tuffaceousshales. In the present study, 18 species belonging to 9 genera from the benthic foraminifera were identified. In the late Middle Eocene, the performance of the orogenic Pyrenean phase led to the rising of the sedimentary strata and subsequent retreat of the sea and then the sea re-advanced during the Priabonian stage. The presence of a conglomerate at the base of the formation reveals the next activity of the tectonic phase. In this study, the rock unit of the Lower Red Formation belonging to the Oligo-Miocene is located on the deposits of the Kond Formation. پرونده مقاله -
دسترسی آزاد مقاله
176 - Sea-level change and deep sea sequence stratigraphy: A Middle Jurassic siliciclastic strata (Kashafrud Formation), NE Iran
Mehdi Reza PoursoltaniThe Upper Bajocian- Lower Bathonian succession in the Kopet-Dagh Basin of NE Iran represents fluvio-deltaic to turbidite deposits. The Kashafrud Formation provides an excellent opportunity to study the interplay between deep-water sedimentation and syndepositional tecto چکیده کاملThe Upper Bajocian- Lower Bathonian succession in the Kopet-Dagh Basin of NE Iran represents fluvio-deltaic to turbidite deposits. The Kashafrud Formation provides an excellent opportunity to study the interplay between deep-water sedimentation and syndepositional tectonic subsidence (or uplift) in the region. The effects of these processes caused sea-level changes, variation in depositional sequences, and formation of different types of sequence boundaries. The Kashafrud Formation is recognized as a super-sequence and is overlain and underlain by type 1 sequence boundaries. Based on sedimentological analysis, twelve lithofacies and three facies associations have been identified in the Kashafrud Formation. The succession is represented by parasequences formed as part of a second order super-sequence, and a fourth order regression. The thickness variations indicate a strong influence of basin-floor topography on the location of depositional successions. High rates of sea-level fall led to the development of a limited number of major incised channels; in contrast the major thick-bedded mudstone indicates high rates of sea-level rise for prolonged periods. The interpreted sea-level curve during deposition of the Kashafrud Formation can be correlated with the world sea-level curve for the Middle Jurassic, with differences mainly related to local structural events in the basin. Tectonism, compaction and rate of deposition were the main factors that controlled the vertical facies transitions in these parasequences. پرونده مقاله -
دسترسی آزاد مقاله
177 - Organic Geochemical Evaluation of Madbi Source Rock, Al-Jawf Basin, NE Central Yemen
Abdulwahab S. Alaug Khaled A. Al-WosabiOrganic geochemical evaluation of the Madbi Formation as the main source rock of the Al-Jawf Basin, NE Central Yemen was the main objective of this study. The organic geochemical methods used in the study include: rock-eval pyrolysis, total organic carbon, and optical m چکیده کاملOrganic geochemical evaluation of the Madbi Formation as the main source rock of the Al-Jawf Basin, NE Central Yemen was the main objective of this study. The organic geochemical methods used in the study include: rock-eval pyrolysis, total organic carbon, and optical measurements as the vitrinite reflectance and thermal alteration index. In this study, 67 well core and side-well core samples of the H-1 and K-1 exploratory wells of the Al-Jawf Basin were analyzed to calculate the several organic geochemical and optical parameters. The obtained results show the presence of strong source rock probabilities within the Madbi Formation in this basin. The results are classified into three categories: poor, fair, and good source rocks, with a mixed marine Kerogen type II/III and continental Kerogen type III. The maturation of source rocks was affected by heating and re-cycling of heat events during the Cretaceous and Tertiary periods. This interpretation is strongly related to the breakup of the southern Gondwanaland and the opening of the Red Sea and Gulf of Aden. Based on the evaluation of the source rocks, the shale, calcareous shale, and claystones of the Madbi Formation are considered the main source rocks in this basin. According to the present study, the hydrocarbon potential ity is good to fair grade in the Al-Jawf Basin. پرونده مقاله -
دسترسی آزاد مقاله
178 - Microbiostratigraphy of the Qom Formation in south and west of Tafresh, Central Iran
I. Maghfouri Moghadam S. Borji E. Amini S. Azadbakht M. Taherpour Khalil AbadThe Qom Formation, a series of shales, sandstones and carbonate deposits, is the last transgression of the sea in Central Iran sedimentary basin. Foraminifera are one of the most important and numerous fossil groups present in the Qom Formation. In this study, the micro چکیده کاملThe Qom Formation, a series of shales, sandstones and carbonate deposits, is the last transgression of the sea in Central Iran sedimentary basin. Foraminifera are one of the most important and numerous fossil groups present in the Qom Formation. In this study, the micropaleontology of the Qom Formation in three measured stratigraphic sections in south and west of Tafresh (Rakin, Band-e-Ali Naghi Beig and Hezar Abad) are discussed. Except of the Rakin stratigraphic section, the lower and upper boundaries of the Qom Formation with Lower and Upper Red formations are conformable from the stratigraphy point of view. But, there is no outcrop in the upper boundary of the Rakin stratigraphic section. The study of 78 samples which were taken from the studied sections led to the identification of 34 genera and 39 species of benthonic foraminifera, 2 genera and 2 species of planktonic foraminifera, 4 genera of red algae and 3 genera of bryozoan. Based on the recognized foraminifera such as Lepidocyclina (Nephrolepidina), Miogypsioides sp., Meandropsina anahensis, Ammonia beccarii the age of the Qom Formation in the Rakin stratigraphic section is determined as Chatian-Aquitanian and in the Band-e-Ali Naghi Beig stratigraphic section as well as the Hezar Abad stratigraphic section is determined as Aquitanian. پرونده مقاله -
دسترسی آزاد مقاله
179 - Oligocene-Miocene Microfacies Study of Asmari Formation(NW - SE of Shiraz, Iran)
Mohammad Sadegh Dehghanian Borzu Asgari Pirbalouti Hamidreza MasoumiIn this research, totally 610.4 meters of the Asmari Formation are studied in two stratigraphic sections on Bavan Mountain an Sarvestan section in Fars province, Iran. The indexed microfacies are carefully determined through studying of 230 thin sections.This research s چکیده کاملIn this research, totally 610.4 meters of the Asmari Formation are studied in two stratigraphic sections on Bavan Mountain an Sarvestan section in Fars province, Iran. The indexed microfacies are carefully determined through studying of 230 thin sections.This research shows that the indexed microfacies are mudstone, wackestone, packstone, prainstone and the amount of microfacies elements such as bioclasts, pellets, extraclasts and intraclasts. They are varied in different parts of the studied sections and the total amount of bioclasts in the section is more than other elements. The abundance of benthic bioclasts represents the regression of the basin from the open sea into the sub tidal and intertidal zone. پرونده مقاله -
دسترسی آزاد مقاله
180 - Sedimentary structures and depositional environment of the Ashin Formation in Nakhlak area, Central Iran
S. H. VaziriMiddle to Upper Triassic (Upper Ladinian to Lower Carnian) deep-sea sedimentary rocks crop out across a large area west of Nakhlak village, Central Iran and have been named Ashin Formation. The up to 304m thick, turbiditic, siliciclastic Ashin Formation consists of alte چکیده کاملMiddle to Upper Triassic (Upper Ladinian to Lower Carnian) deep-sea sedimentary rocks crop out across a large area west of Nakhlak village, Central Iran and have been named Ashin Formation. The up to 304m thick, turbiditic, siliciclastic Ashin Formation consists of alternating turbiditic, thin- and medium-bedded calcareous sandstones, purple, fine-grained volcaniclastic sandstones, and mostly green and violet, very thin-bedded volcaniclastic shales that can be subdivided into three members. Ammonoids collected from members 1 and 3 of the Ashin Formation indicate a Late Ladinian to Early Carnian age for the formation. These alternations fine upwards and exhibit sedimentary structures such as graded bedding, parallel lamination (with parting lineation) convolute bedding, small-scale cross-bedding, load casts, groove casts, prod casts, flute casts, bounce casts, chevron casts, brush casts and chips and protraction traces indicating A to E parts of the Bouma cycle. Septarian nodules occur repeatedly. The lower surfaces of sandstones contain abundant trace fossils belong to the deep-sea Nereites ichnofacies. Numerous signs of strong current activity such as groove casts, flute casts and prod marks associated with trace fossils such as Paleodictyon, Protopaleodictyon, Megagrapton and Lorenzinia indicate that the Ashin Formation represents a deep marine environment. The field and petrographic studies show that the Ashin Formation was deposited in distal parts of submarine fans, on the abyssal plain. پرونده مقاله -
دسترسی آزاد مقاله
181 - Biostratigraphic Correlation of Elikah Formation in Zal Section (Northwestern Iran) with Ruteh and Type Sections in Alborz Mountains Based on Conodonts
Nazanin BadriKolalo Bahaeddin Hamidi Seyed Hamid Vaziri Seyed Ali AghanabatiConodonts are the most important fossil remains from the largest Phanerozoic extinction as well as the mass extinction of the late Paleozoic and could be used for exact dating during this period. Triassic deposits located in the Elikah Formation contain exposures in mos چکیده کاملConodonts are the most important fossil remains from the largest Phanerozoic extinction as well as the mass extinction of the late Paleozoic and could be used for exact dating during this period. Triassic deposits located in the Elikah Formation contain exposures in most of the Alborz sections as well as the Zal section in northwestern Iran. In this study, the Elikah Formation was investigated from a biostratigraphy point of view in the type section and Ruteh section of the Alborz Mountains and Zal section in the Jolfa region based on the existing conodonts. Biostratigraphy study of more than 300 samples taken from these three sections, resulted in the identification and introduction of the following conodont biozones: Taxone Range Zone Hindeodus parvus and Pachycladina symmetrica – Pachycladina Oblique Assemblage Zone in the type section, Hindeodus parvus Taxon Range Zone, Hadrodontina –Pachycladina Assemblage Zone and Parachirognathus – Furnishius Assemblage Zone in the Ruteh section and finally Hindeodus parvus Taxon Range Zone, Isracicella staeschei Taxon Range Zone and Arachirognathus – Furnishius Assemblage Zone in the Zal section. These biozones indicate that the Elikah Formation, in the three previously defined sections, is Early Triassic (Griesbachian). Additionally, comparison of the biozones in these sections illustrates a biostratigraphic correlation of Early Triassic deposits in the Zal, Ruteh and type sections. پرونده مقاله -
دسترسی آزاد مقاله
182 - Relations between Deep and Shallow Stratigraphic Units of Northern Iraq during Cretaceous
Kamal H Karim Rabea K Al-Hamadani Sirwan H. AhmadThe studied area includes Sulaimani, Erbil and Dohuk Governorates where Cretaceous rocks are well exposed in the High Folded Zone of North and Northeastern Iraq. This area is part of the northwestern boundary of Arabian platform near to Iranian border. In these governor چکیده کاملThe studied area includes Sulaimani, Erbil and Dohuk Governorates where Cretaceous rocks are well exposed in the High Folded Zone of North and Northeastern Iraq. This area is part of the northwestern boundary of Arabian platform near to Iranian border. In these governorates, the study tries to clarify the relations between deep and shallow stratigraphic units (formation or facies) during Cretaceous. The result of the present study is mainly depended on the field lateral tracing of the lithologic changes and paleontological evidences for indicating the new age termination of the units. The result showed as a generalized and simple model of temporal and special relations between Cretaceous deep and shallow water formations. The Balambo (Kazhdumi in Iran), Kometan (Ilam), Shiranish-Tanjero (Gurpi) Formations (as deep facies) are indicated as lateral equivalent of shallow facies of Qamchuqa (Sarvak and Dariyian), Bekhme (has not equivalent in Iran yet) and Aqra Formation (Seymare or Tarbur) respectively. On the model, the transition zone is indicated where the deep facies, from the east, change to shallow ones at the west. The shallow facies consist of coarse grain limestone with fossils skeletons, bioclasts and intraclasts. The deep facieses are fine grain pelagic limestone with microfossils (panktonic forams and nanofossils) whiles the transitional facies (zones) generally consist mixture of the two as interfigering relation between the deep and shallow facies. As the changes of the lithology of transitional zones are relatively sudden, therefore, they are not designated as formation and not defined previously. پرونده مقاله -
دسترسی آزاد مقاله
183 - Ichnotaxonomic analysis and depositional controls on the carbonate ramp ichnological characteristics of the Deh-Sufiyan Formation (Middle Cambrian), Central Alborz, Iran
Aram Bayet-Goll Reza Moussavi-Harami Asadollah MahboubiThe trace fossil assemblages from the Unit 2 of Deh-Sufiyan Formation are described for the first time from The Central Alborz Range of northern Iran, improving the record of the assemblages in the Cambrian of the Middle East. Twenty-one ichnogenera have been identified چکیده کاملThe trace fossil assemblages from the Unit 2 of Deh-Sufiyan Formation are described for the first time from The Central Alborz Range of northern Iran, improving the record of the assemblages in the Cambrian of the Middle East. Twenty-one ichnogenera have been identified in the Deh-Sufiyan Formation, namely Arenicolites, Bergaueria, Chondrites, Circulichnus, Cruziana, Diplichnites, Didymaulichnus, Diplocraterion, Halopoa, Helminthopsis, Gordia, Gyrophyllites, Lockeia, Monomorphichnus, Palaeophycus, Phycosiphon, Planolites, Rosselia, Rusophycus, Skolithos, and Treptichnus. Characteristics of the facies, lateral and vertical relations between these facies, associational types of the facies and the depositional profile of the shelf transect examined show deposition on a wave-dominated carbonate ramp. Integration of ichnologic data with sedimentologic information supports a firm interpretation of the depositional systems and their evolution. Ethological grouping of the trace fossils resulted from the physico-chemical depositional constraints which defines the proximal-distal ichnofacies gradient pattern of the wave-dominated successions of the Deh-Sufiyan ramp. Considering the obvious deepening of the shallow marine depositional systems of wave-dominated parts of the carbonate ramp, the succession of archetypal ichnofacies can display a bathymetric trend from deeper to shallower parts, and from lower-to-higher hydrodynamic conditions, from the bottom to the top of the Unit 2 of the Deh-Sufiyan Formation. The identification and interpretation of the archetypal ichnofacies are employed to further refine the sedimentary interpretations of parameters such as wave energy, substrate properties, nature of available food supply, salinity, dissolved oxygen content, and variability in sedimentation rates. پرونده مقاله -
دسترسی آزاد مقاله
184 - Evaluation of the Paleocene-Eocene deposits, Jahrum Formation, base on 2-D seismic data, Central Persian Gulf
Naser Abdi Hossain Rahimpour-Bonab Sayyed Reza Moussavi-Harami Iraj Abdollahi Fard Davood Jahani Ali ChehraziThe Persian Gulf is part of an asymmetric foreland basin related to the Zagros Orogen. It has been episodically flooded for much of its history which are reflected in sedimentary successions. The evaluation of this succession from depositional trend view, in central Per چکیده کاملThe Persian Gulf is part of an asymmetric foreland basin related to the Zagros Orogen. It has been episodically flooded for much of its history which are reflected in sedimentary successions. The evaluation of this succession from depositional trend view, in central Persian Gulf during Paleocene-Eocene, is the aim of this article. The sedimentary rocks physical characteristics effects on seismic data, gives an appearance to the data, which can be a key factor for their evaluation. The reflectors geometry and terminations have been used for their interpretation. The current study the uses seismic data beside drilling wells data, including cutting description and logs. The study result shows progradation toward northeast, the direction in which the accommodation space is increasing. The sedimentary environments changes to lagoon, platform and basin which affect the deposits. These environments demonstrate suitable condition for carbonates and evaporites precipitation, in Jahrum Formation, which are approved by cutting ription. The sediments extension and its trend show high thickness of Paleocene-Eocene deposits in north west of the study area, where the basin is deeper. In some intervals the thickness of sediments is decreased in deep basin, due to sediment starvation. پرونده مقاله -
دسترسی آزاد مقاله
185 - Depositional History and Sequence Stratigraphy of the Tirgan Formation (Barremian – Aptian) in the Zavin section, NE Iran
M. Javanbakht R. Moussavi Harami A. MahboubiThe Tirgan Formation (Barremian – Aptian) is exposed in the Kopet Dagh in northeast Iran. One stratigraphic section in Zavin was measured with a thickness of 110 meters. This Formation in section consists of three parts (including lower carbonate, limy shale &ndas چکیده کاملThe Tirgan Formation (Barremian – Aptian) is exposed in the Kopet Dagh in northeast Iran. One stratigraphic section in Zavin was measured with a thickness of 110 meters. This Formation in section consists of three parts (including lower carbonate, limy shale – marl and upper carbonate rocks). Based on the study of 94 thin sections, 10 carbonate and 2 siliciclastic lithofacies have been identified. Carbonate lithofacies were deposited in a ramp platform in fore-shoal, shoal, lagoon and tidal flat environments. Sea level changes during the early Cretaceous time led to the formation of different large scale depositional sequences Zavin (two). The present data can help in the reconstruction of the tectonic history of the area during early Cretaceous time. پرونده مقاله -
دسترسی آزاد مقاله
186 - Microbiostratigraphy of the Oligo-Miocene Asmari Formation, Kuh Siah Anticline (Izeh Basin), SW Iran
Iraj Maghfouri Moghaddam Zahra KhanjaiThis research focusses on the biostratigraphy and paleoecological implications of the carbonatesof the Asmari Formation. The Asmari Formation is located in the Siah Kuhanticline of Izeh, Zagros Basin, SW Iran. It is of Late Oligocene (Chattian) - Early Miocene (Burdigal چکیده کاملThis research focusses on the biostratigraphy and paleoecological implications of the carbonatesof the Asmari Formation. The Asmari Formation is located in the Siah Kuhanticline of Izeh, Zagros Basin, SW Iran. It is of Late Oligocene (Chattian) - Early Miocene (Burdigalian) age. In this stratigraphic section, the Asmari Formation overlies the Pabdeh Formation and underlies the Gachsaran Formation. It consists of cream-colored limestone intercalated with marl. 182 thin sections were prepared and the benthic foraminifera distribution analyzed. Examination of large benthic foraminifera from the 228 m-thick Asmari Formation led to the identification of 3 biozones: the Lepidocyclina- Operculina- Ditrupa Assemblage Zone, Miogypsina-Elphidium sp. Assemblage Zone and the Borelis melocurdica- Meandropsina iranica Assemblage Zone. پرونده مقاله -
دسترسی آزاد مقاله
187 - Source Rock evaluation, Modelling, Maturation, and Reservoir characterization of the Block 18 oilfields, Sab’atayn Basin, Yemen
A.S. Alaug D. Leythaeuser B. Bruns A.F. AhmedA total of 183 core and cutting samples from seven exploratory wells were selected to be analyzed by Rock-Eval pyrolysis. These cores have been drilled through the Lam and Meem Members of the Madbi Formation and contain the major source rocks of Yemen´s sedimentar چکیده کاملA total of 183 core and cutting samples from seven exploratory wells were selected to be analyzed by Rock-Eval pyrolysis. These cores have been drilled through the Lam and Meem Members of the Madbi Formation and contain the major source rocks of Yemen´s sedimentary basins. Contents of total organic carbon were measured and Rock-Eval pyrolysis was performed to evaluate the hydrocarbon potential of Block 18 oilfields in central Yemen. Most of the studied samples have fair to excellent petroleum generation potential as shown by the results of PP, PI, HI and TOC. They have also sufficient TOC values with an average value of 1.48 wt% and a maximum value of 12.34 wt% with a good petroleum potential averaging 4.54 kg HC/ton of rock and a maximum value of 44.78kg HC/ton of rock. HI values of the Madbi Formation in its full thickness range from 16 mg to 1114 mg HC/g TOC with an average value of 273 mg HC/g TOC. Kerogen types II and III, and a small amount of type I can be observed. These kerogens are thermally mature and mostly within the hydrocarbon generation zone. In a numerical simulation approach the thermal and burial history of the Alif-1 well, which is representative for this area was modelled. Using vitrinite reflectance data, as means of calibration, the modelling results were subjected to a sensitivity analysis concerning paleo-heat flow, radiogenic heat production, basement thickness and eroded overburden or maximum burial, respectively. The calculated temperature during deepest burial of the source rock layers of the Madbi Formation reached 158 °C for the Lam Member and 182 °C for the Meem Member. Compliance with the measured R0 values, used as calibration parameter, could be achieved by assuming an erosion of 1100 m of the Upper Tawilah Group. The heat flow is maximized at the onset of basin rifting in Late Jurassic to 90 mW/m2 having a base level of 60 mW/m2. Thus, the Lam Member has reached the main oil to wet gas window at its deepest burial whereas the Meem Member has undergone the wet gas window in its full thickness. The isopach map of the Alif Member, as the main reservoir in the studied area, indicates thickening of the sandstone unit towards the eastern and western parts of Block 18 around the Dostour Al-Wahdah gasfield in the east and at the Alif oilfields in the west. پرونده مقاله -
دسترسی آزاد مقاله
188 - Upper Cretaceous Petroleum System of Northwestern Persian Gulf
Ali Amirkhani Marziyeh Mirzakhanian Susan Sepahvand Sadoni SadoniThree well - known source rocks of the Zagros basin and the Persian Gulf are Mesozoic in age.The Jurassic Sargelu, Albian Kazhdumi and Neocomian-Coniacian Garau formations have charged the Cretaceous reservoirs of this area. The northwest part of the Persian Gulf is str چکیده کاملThree well - known source rocks of the Zagros basin and the Persian Gulf are Mesozoic in age.The Jurassic Sargelu, Albian Kazhdumi and Neocomian-Coniacian Garau formations have charged the Cretaceous reservoirs of this area. The northwest part of the Persian Gulf is strongly influenced by two major N-S trending paleohighs (Hendijan- Bahregansar-Regesafid-Izeh and Kharge- Mish) and surrounding plaeotroughs that play the most important role in the reservoir and source rock development. The most important reservoirs are the Cenomanian- Turonian Sarvak and Santonian Ilam formations which locally separated by a thin shaly unit of the Coniacion Laffan Formation. The reservoir facies are dominated by benthic and rudist debris on the paleohighs which laterally grading down to the basinal Cenomanian Ahmadi and Santonian Gurpi pelagic marls. In order to study the petroleum system of the northwest Persian Gulf, several 2D seismic lines and six wells were interpreted. Based on the interpreted seismic profiles the best locations for the reservoir facies could be within the pinch-out geometries around the plaeohighs which occasionally sealed by the baisn-type Campanian- Maastrichtian Gurpi marls at the top, Laffan shale at the middle and Albian Kazhdumi shale at the base as stratigraphic traps. A large hiatus exists between the top of the Cenomanian Sarvak Formation and Eocene Pabdeh Formation in the Tangue and Rage- Safid paleohighs, where these facies change could form stratigraphic traps. Toward the Nowrooz, Bahregansar Hendijan, structures, this hiatus is much shorter where Campanian- Maastrichtian Gurpi Formation directly has coverd the Sarvak Formation. پرونده مقاله -
دسترسی آزاد مقاله
189 - Paragenesis and geochornological studies of Asnawa Iron Ore by the isotope and mineral chemistry in Penjween Area, Zagros Suture Zone Kurdistan Region, NE Iraq
Kamal H. Karim Nabaz R.H. Aziz Al-Bidary Mayssa A.A.AThe Asinawa iron ore is located about 3km to the southeast of Penjween town, Sulaimaniya Governorate, Kurdistan Region, Northeastern Iraq near the Iraq-Iran border. The exposed iron ore deposit is about 60 and 400m wide and long respectively. The present study is the re چکیده کاملThe Asinawa iron ore is located about 3km to the southeast of Penjween town, Sulaimaniya Governorate, Kurdistan Region, Northeastern Iraq near the Iraq-Iran border. The exposed iron ore deposit is about 60 and 400m wide and long respectively. The present study is the re-study of the geology and geochemistry of the Asnawan Iron ore deposit and concluded that the country rocks are consist of hornfels in which the original lamination or banding of the parent rocks (calc-silicate low grade metamorphic rocks) are preserved and inherited from its laminated sedimentary precursors. Moreover, the facies that is associated with host rocks is hornblende-hornfels facies with temperature range of 550-650 oC. This range is confirmed through thermo barometry. There are evidences of localized pyroxene-hornfels and sanidine hornfels facies too. Additionally, the detail of the different stages of the iron ore paragenesis is shown by discussion with the aid of suitable graphical drawing and geochemical variation diagrams. By these methods, the sedimentary stratigraphic unit of the parent rock (protolith) was found for the first time which consists of Qulqula Radiolarian Formation (Kermanshah Radiolarites in Iran). The bedded chert, limestone and calcareous shale is the main lithology of the latter formation and after burial and deformation, it is regionally metamorphosed to banded and lamiated calc-silicate rocks of green facies rocks. At a later stage, these rocks, remetamorphosed (polymetamorphism pattern) again to hornfels with concurrent changing to iron ore by basic iron rich hydrothermal solutions during Eocene (37-40Ma). This age is calculated using Ar39/Ar40 method of dating. پرونده مقاله -
دسترسی آزاد مقاله
190 - Designing the Evaluation Model of Proportionalization Policies Administrative System Formations in Iranian National Oil Company
Iraj Akbarifar Foad Makvandi Mohammad Hemati Ghanbar AmirnejadThe purpose of this research is to design a model for evaluating the policies of proportionalization of administrative system formations in Iranian National Oil Company. In this regard, the research method was a combination of qualitative and quantitative methods and to چکیده کاملThe purpose of this research is to design a model for evaluating the policies of proportionalization of administrative system formations in Iranian National Oil Company. In this regard, the research method was a combination of qualitative and quantitative methods and tools with an applied orientation along with survey strategy and inductive approach. The qualitative part of the research included a review of the records and background of the research and conducting library studies based on the content analysis and meta-composition methods and the Delphi technique, and in the quantitative part, several techniques and tools were used, including interpretive structural modeling and structural equations, factor analysis, pairwise comparison matrix, and questionnaire tools. By carrying out the qualitative stage and refining and screening and verifying the achievements in the quantitative stage, finally 89 indicators in the form of 11 dimensions and 35 components, under the four main concepts of "policy evaluation", "proportionalization", "administrative system formations" and "macro environment" were counted and classified. In the next step, by identifying the relationship and mutual effect of the identified factors, the evaluation model of the design policy and finally the validity and reliability of the model was put into the test and approved. The issue of the optimal size of the government and the public policies related to it has been discussed and debated among political and economic experts for about three decades in the documents of the government and the ruling space of the country with different expressions such as "downsizing", "privatization" and "rationalization". Following the studies conducted in this research, with the premise that on one hand, the correct and scientific evaluation of public policies has an undeniable role in the successful implementation of policies, and on the other hand, in our country, the issue of evaluating public policies has always been like a missing link in the space that governs this territory and better management of resources in Iranian National Oil Company. پرونده مقاله -
دسترسی آزاد مقاله
191 - A Heuristic Algorithm for Solving Single Machine Scheduling Problem with Periodic Maintenance
Amir Ebrahimi Zade Mohammad Bagher Fakhrzad Mohsen HasaninezhadAbstract. In this paper, the scheduling problem with nonresumable jobs and maintenance process is considered in order to minimize the makespan under two alternative strategies. The first strategy is to implement the maintenance process on the machine after a predetermin چکیده کاملAbstract. In this paper, the scheduling problem with nonresumable jobs and maintenance process is considered in order to minimize the makespan under two alternative strategies. The first strategy is to implement the maintenance process on the machine after a predetermined time period and the second one is to consider the maximum number of jobs that can be done with an especial tool. We propose a new mathematical formulation for the aforementioned problem and regarding the problem is included in the NP-Hard class of problems, in the second part of the paper, we propose a heuristic algorithm in order to solve the problem in a reasonable time. Also we compare the performance of the proposed algorithm with existing methods in the literature. Computational results showed that the proposed algorithm is able to attain optimum solutions in most cases and also corroborate its better performance than the existing heuristic methods in the literature. پرونده مقاله -
دسترسی آزاد مقاله
192 - Identifying the Dimensions and Components of the Health-oriented Urban Form with An Emphasis on the Epidemic Disease: A systematic scoping review
Helia Sareminia Fatemeh Mohammadniay Gharaei sanaz saeidi mofrad Sulmaz GhahramaniA review of human history, activity and technology shows that, the changes in the environment and the health of citizens have gone together as an inseparable factor. Cities are complex systems that Recent developments in the lifestyle of people have caused the emergence چکیده کاملA review of human history, activity and technology shows that, the changes in the environment and the health of citizens have gone together as an inseparable factor. Cities are complex systems that Recent developments in the lifestyle of people have caused the emergence of non-communicable diseases among the residents of cities. Furthermore, in recent decades, the world has witnessed a variety of emerging infectious diseases, some of which developed to pandemic world threatening outbreaks. This paper, as far as we know of, is the comprehensive and first review to evaluate relationship between the characteristics of urban form and urban health with an emphasis on epidemic diseases. Through a systematic review, the first step, compiled urban form characteristics that affect urban health, and then identified potential synergies and trade-offs between these dimensions. Research sources were examined based on the world's most authoritative scientific database. In the second step, resource retrieval was performed based on keywords, title and abstract, and finally, in the third step, analysis and conceptual model were developed. A framework based on the Health-oriented Urban Form (HUF) is proposed, synthesizing the inter linkages between urban form and urban health; providing a new holistic perspective on the topic. Looking at the communicable and non-communicable disease -physical and non-physical-urban form characteristics - technology and nature relationships simultaneously may contribute to practical guidance opportunity to build better and more sustainable societies and cities. پرونده مقاله -
دسترسی آزاد مقاله
193 - Identifying the physical form of Mashhad based on the analysis of economic trends During 1986-2021
farid bashian Hadi Sarvari Toktam Hanaee Ali Akbar SarvariIn recent years, the physical form of Mashhad, as the second metropolis of the country, has been affected by macro economic indicators. In order to resist the impulses and pressure of the upcoming economic trends, it is necessary to measure the dimensions and the effect چکیده کاملIn recent years, the physical form of Mashhad, as the second metropolis of the country, has been affected by macro economic indicators. In order to resist the impulses and pressure of the upcoming economic trends, it is necessary to measure the dimensions and the effect of the mentioned economic forces on the physical form of Mashhad in the past. Therefore The question of the current research is "What is the role of economic trends in the formation of the physical form of Mashhad ?".The approach of the current research is quantitative and a longitudinal survey research method has been used. In order to analyze the trend of economic indicators, the vector auto regression model has been used to measure the effects of variables on each other.Also Landsat satellite images have also been used to analyze the changes in the physical form of Mashhad city.The results of the research show that in recent years, the country's economic developments have led to an increase in the price of currency. This, along with other economic indicators, has caused inflation in the price of land, housing, and rent, and has prompted the city managers to reduce the inflation in land and housing by allowing the growth of Mashhad. The directions of development in the early years were generally in the north and east of the city, but in recent years, the city has expanded to the west and south. The results of the research show that the variables of exchange rate, Gini coefficient and unemployment rate have more stable effects than other economic variables on the physical form of Mashhad city in such a way that whenever one of these three variables is associated with a strong fluctuation, the physical form of Mashhad city is also affected. پرونده مقاله -
دسترسی آزاد مقاله
194 - The Environmental and Social Manifestation of Islamic-Iranian Urban and Architectural Configuration
Seyed Majid Mofidi ShemiraniThe recent increase in Islamic awakening in many Muslim societies have created a momentum to the rise of contextual necessity for Islamic culture. Islam framed in cities as a religion and lifestyle. City morphology based on Islamic ideology has brought interest to the d چکیده کاملThe recent increase in Islamic awakening in many Muslim societies have created a momentum to the rise of contextual necessity for Islamic culture. Islam framed in cities as a religion and lifestyle. City morphology based on Islamic ideology has brought interest to the discussion among the specialists and professionals in Muslim world for many decades particularly in Iran. This goal can be achieved by experts and intellectuals and its particularity should be defined and illustrated. The present paper attempts to synopsize and express some visions of contemporary and future urban form and architecture for Muslim cultures and societies particularly Iran. This research attempts to pursue the main frameworks for the study of cultural fabrics reflecting on urban configuration, and also delineates the qualities of spatial aspects, and make some recommendations at the end. This effort is a tentative rebirth which, it is hoped, will stimulate further discussion and research on the merits of the Islamicity. پرونده مقاله -
دسترسی آزاد مقاله
195 - Cultural – Communicative Phenomenology of Iranian Tekyeh from a Physical – Special Value perspective
Elahe Zoghi Hoseini Mohsen Tabasi Mahsa HashemiReligious buildings are the outstanding visualized symbols of devotion in the religious realm of belief and values which they are derived from. Hence, planners and artists have devoted the extent of their creativity - fearless and bountiful - to the enrichment of these چکیده کاملReligious buildings are the outstanding visualized symbols of devotion in the religious realm of belief and values which they are derived from. Hence, planners and artists have devoted the extent of their creativity - fearless and bountiful - to the enrichment of these monuments. These buildings as well as their architectural, artistic, structural and historical function also have communicative functions. Extent of message, variety of targets and types of arts has increased the importance of this function. Takaya were mostly used for religious ceremonies and religious-dramatic rites. This art is recently declining due to the lack of a permanent place for performance. Accordingly, this study addresses the morphological recognition of Takaya as a vital continuum through architectural and urban aspects and explores the necessity of its resurrection regarding the cultural requirements. This research has a qualitative nature and its type, concerning the conclusion, is applied; the method of data collection is documental- field and its reasoning method is cross sectional (analytical) descriptive. The findings show that Takaya, regarding their existence in context of a belief destiny of a city, have always has been a symbol of efficiency from the architectural potentials for strengthening the religious values system. Takaya because of their special structural functional semantic system, beside other places of same function in other countries, are considered a distinguished identity. Meanwhile as the only open spaces with the function of strengthening and consolidation of rituals in Muslim’s architecture and urban culture, own high credibility. پرونده مقاله -
دسترسی آزاد مقاله
196 - نقش زنان در شکل گیری فضاهای شهری
محمد مهدی مولایی آرزو لطفیهدف از انجام پژوهش حاضر تعیین ضوابط و چهارچوب طراحی یا مدول از فضاهای شهری جهت زنان بود. جامعه مورد بررسی زنان است که نیازهای شهری معضلات و کمبودهای فضا در اجتماع آنان در گذر تاریخ مورد توجه قرار نگرفته بود. طرح پژوهشی کاربردی است. ابزار گردآوری با استفاده از داده های ک چکیده کاملهدف از انجام پژوهش حاضر تعیین ضوابط و چهارچوب طراحی یا مدول از فضاهای شهری جهت زنان بود. جامعه مورد بررسی زنان است که نیازهای شهری معضلات و کمبودهای فضا در اجتماع آنان در گذر تاریخ مورد توجه قرار نگرفته بود. طرح پژوهشی کاربردی است. ابزار گردآوری با استفاده از داده های کتابخانه ای و پایگاه های پژوهشی مرتبط به حوزه معماری و شهرسازی زنان بود. مبانی نظری جمع آوری شده با استفاده از روش توصیفی - تحلیلی مورد بررسی قرار گرفت. نتایج نشان داد که درگذشته جایگاه و فعالیت زنان در عرصه های شهری بیشتر بوده وتعریف مشخص تری داشته است و زنان در آسایش و امنیت به فعالیت های روزمره خود رسیدگی می کردند. برخلاف گذشته در جوامع امروزی عدم توجه به بافت فضای عمومی و اختصاص دادن مکانی اجتماعی مناسب بانوان، فقدان امنیت را به ارمغان آورده است. در دنیای مدرن حاکم بر جامعه نیاز های زنان از برنامه های شهرسازی و معماری کامل حذف شده و محیط به فضای کاملاً مردانه ای تبدیل شده است. مؤلفه های نیاز روحی، جسمی، امنیت و تفاوت های فیزیولوژیکی بین زنان و مردان از عوامل اصلی و بسیار تأثیرگذار در کیفیت فضاهای شهری مناسب بانوان محسوب می شوند. ارتباط این مؤلفه ها با ضوابط طراحی شهری می تواند کمک شایانی به ساخت شهر همسو با بانوان و محرک حضور بیشتر آنها در جامعه باشد. پرونده مقاله -
دسترسی آزاد مقاله
197 - A Study of the Water Leakage in the Irrigation Channels of Kazeroun Plain through ponding Method and Compare with Empirical Formulas
محسن مؤمن زاده محمد علی شاهرخ نیاIn the past centuries, water was considered as one of the most important factors to appear the social groups and develop communities. Today, it is emphasized as a necessity to supply the economic and political balance. Regarding to limited water resources and underused چکیده کاملIn the past centuries, water was considered as one of the most important factors to appear the social groups and develop communities. Today, it is emphasized as a necessity to supply the economic and political balance. Regarding to limited water resources and underused plains in the world, to provide the humans needs and prevent to appear the consequences of water shortage, the best strategy is the optimum use of water and soil resources. Also growing population and limited food and water resources is caused to some scholars tries to use the limited water optimally. One strategy is to investigate the effect of conceal in irrigation channels to reduce leakage. The results showed that there was no significant difference of water leakage in ponding method and empirical formulas of MolesWorth-Yeni Doumia, Ingham, Davis and Wilson in Arab Canal. Moreover, the empirical methods of Mortiz and Indian Panjub were significant on the level of 5% and there was significant difference in empirical formulas of Moles Worths-Yeni Doumia, Davis- Wilson, Mortiz and Ingham, also it was significant in the level of 1% through Indian Pan Jub. In addition, the result of comparison between the empirical formulas demonstrated that the maximum and minimum leakage were seen in the Davis and Wilson in the Khajeh Bagheri canal and Indian PanJub in Arab canal, respectively. پرونده مقاله -
دسترسی آزاد مقاله
198 - Numerical study of flow of labyrinth weir with triangular and curved plan form using Fluent software
سمیه امامی هادی ارونقی جواد پارساLabyrinth weirs have not a straight crest in the perpendicular direction to the flow. The plan view of the weir consists of multiple and broken linear crests that cause the increase of its effective length. The advantages of this type of weirs are higher discharge capac چکیده کاملLabyrinth weirs have not a straight crest in the perpendicular direction to the flow. The plan view of the weir consists of multiple and broken linear crests that cause the increase of its effective length. The advantages of this type of weirs are higher discharge capacity, easy aeration as well as low fluctuations of water surface at the weir upstream. This paper deals with the simulation of the flow over labyrinth weirs with triangle plan to obtain its discharge coefficients. In order to simulate the flow over the weir, Fluent software was used as a virtual laboratory. The turbulence and the free surface of the flow were modeled by k-ε RNG and volume of fluid (VOF) algorithms, respectively. The results were compared with the experimental results of Kumar et al. (2012) for curved plan crest labyrinth weir. The comparison of the results indicated that the curved plan form weirs have the higher discharge coefficients than the ones in triangular plan form and discharge of curved plan form weirs compared with triangular plan form an increase of 25 percent. پرونده مقاله -
دسترسی آزاد مقاله
199 - بررسی فرم مهندسی سازه ی زبانی و ادبی تصدیر در غزلیّات کلیم کاشانی
فضل الله رضایی اردانی(نویسنده مسئول) غلامرضا هاتفی اردکانیتصدیر سبب خلق موسیقی و هنجارافزایـی است و در حوزه های موسیقی و بلاغت، اهمّیّت دارد. در این جستار ادبی، فرم این هنرسازه، در غـزلیّات کلیـم کاشانـی، شاعر مشهور قرن یازدهم هجری قمری، بررسی شدهاست. کاربـرد تصدیـر، غزلیّات کلیم را، سـرشار از مـوسیقی درونـی، کـرده و ایـن چکیده کاملتصدیر سبب خلق موسیقی و هنجارافزایـی است و در حوزه های موسیقی و بلاغت، اهمّیّت دارد. در این جستار ادبی، فرم این هنرسازه، در غـزلیّات کلیـم کاشانـی، شاعر مشهور قرن یازدهم هجری قمری، بررسی شدهاست. کاربـرد تصدیـر، غزلیّات کلیم را، سـرشار از مـوسیقی درونـی، کـرده و ایـن هنرسازه در خدمت انتقال معنی، و احساس به مخاطب، است. تکرار از اساسیترین عوامل ایجاد موسیقی است. جلوههایی از این پدیدهی زبانی، در طبیعت، از جمله روز و شب، بهار و تابستان و ... میبینیم. تکـرار از نـوع تصـدیـر از خصـایص غزلیّات کلیـم در محور همنشینی و امتداد طولی سرودههای او، بشمارمیآید. این مقاله، به بررسی فرم مهندسی آن، در غـزلیّات 590 گانـهی این شاعر و همچنین بررسی دیگر سازههای ادبی ابیات مورد نظر، میپردازد. این ویژگی، از نظر دیداری و شنوایی، در زنجیرهی کلام، نظم، ارتباط و زیبایی، ایجاد میکند و مخاطب را، به التذاذ ادبی سوق مـیدهد. این پژوهش با هدف شناسایی بسامد تکرار از نوع تصدیر و همچنین بومیکردن نقد صورتگرایانه انجام شدهاست. روش تحقیق در این مقاله، براساس تحلیل و توصیف یافتههای پژوهش با در نظر گرفتن اصول نقد صورتگرایانه است. با این پژوهش پی برده شد که کلیم با کاربرد تصدیر، برای تکاپوی ذهن مخاطب و القای محتوا، از مراعاتالنظیر، نغمهی حروف و دیگر هنرسازههای ادبی، بهره بردهاست. همچنین، کاربرد تصدیر در غزلیّات این شاعر، سبب ایجاد موسیقی لفظی و کناری شدهاست. پرونده مقاله -
دسترسی آزاد مقاله
200 - بررسی شاخصهای ادب غنایی در اشعار آیینی ملکالشعرا بهار
شبنم کریم شاهی ملایری رضا صادقی شهپر حجت اله غ منیریشعر آیینی به دلیل غلبۀ احساسات شاعر، یکی از مهمترین گونههای ادب غنایی است و بالتبع اکثر شاخصهای صوری و محتوایی ادبیّات غنایی در زیربنای آن بهکار رفتهاست. این پژوهش، با هدف بررسی و تبیین بازتاب شاخصهای ادب غنایی در اشعار آیینی ادبیّات مشروطه فارسی -مطالعه موردی اشع چکیده کاملشعر آیینی به دلیل غلبۀ احساسات شاعر، یکی از مهمترین گونههای ادب غنایی است و بالتبع اکثر شاخصهای صوری و محتوایی ادبیّات غنایی در زیربنای آن بهکار رفتهاست. این پژوهش، با هدف بررسی و تبیین بازتاب شاخصهای ادب غنایی در اشعار آیینی ادبیّات مشروطه فارسی -مطالعه موردی اشعار آیینی ملکالشعرا بهار- انجام شدهاست. ملکالشعرا بهار از شاعران برجستۀ دورۀ مشروطه و ملکالشعرای آستان قدس رضوی در سرایش اشعار آیینی بهویژه در رثای پیامبر و امامان معصوم ید طولایی داشت. او حقیقت سیمای معصومین علیهالسلام را با تخیّلی سرشار از عاطفه و احساس سروده و آنان را در آیینۀ شعرش در قالب زبانی غنایی توصیف کردهاست. پژوهش حاضر با رویکردی تحلیلی_توصیفی و بر پایۀ مطالعات کتابخانهای انجام شده و در پی پاسخ به چندی و چونی شاخصهای ادب غنایی در اشعار آیینی ملکالشعرا بهار است تا بسامد و برجستگی آنها را نشان دهد. دستاورد پژوهش نشان میدهد، شاخصهای محتواهایی چون وصف، دید منفی نسبت به روزگار، اشاره به اعیاد مذهبی و ولادت معصومین و ... در شعر بهار برخاسته از عاطفۀ شاعر (غم و شادی) است که در ساختارهای بلاغی (شاخصهای صوری)، تشبیه، استعاره و نیز زبانی غنایی با واجآرایی و موسیقی غنایی نمود یافته است. پرونده مقاله -
دسترسی آزاد مقاله
201 - باز اندیشی نسبیت زبانی با رویکرد شناختی و استناد بر داده های زبان فارسی
ابراهیم بدخشان حسن آزمودهIn this article, we investigate the relation between language and culture, linguistically and psycholinguistically, excellently dealt with in Sapir-Whorf hypothesis. After portraying the subject, we attempt to elucidate it with the analysis of pros and cons of the view چکیده کاملIn this article, we investigate the relation between language and culture, linguistically and psycholinguistically, excellently dealt with in Sapir-Whorf hypothesis. After portraying the subject, we attempt to elucidate it with the analysis of pros and cons of the views on this area. It will then be claimed that the system of linguistic forms has a strong effect on the world-view of speakers and also acquiring and perceiving of many concepts, relying on rational and empirical evidences extracted from known languages such as English, Persian, Arabic and also distant languages such as Hopi, Maya, etc. Based on cognitive approach, we will also try to prove that single concepts and compound concepts, contrary to the assumption, function divergently in thinking process. پرونده مقاله -
دسترسی آزاد مقاله
202 - برون رفت هایی برای چاش های فراروی خط فارسی
مالک شعاعیPassing time entails change and transformation, therefore, every Phenomenon, to be alive, should be associated with time. With regard to this, Persian language is not an exception, that is, it should be directed in a way that not only releases it from stiffeners but al چکیده کاملPassing time entails change and transformation, therefore, every Phenomenon, to be alive, should be associated with time. With regard to this, Persian language is not an exception, that is, it should be directed in a way that not only releases it from stiffeners but also leads it to eternity. These changes are acceptable if they originate from within the language itself. In this article two rules have been suggested in order to reach this end: A) Writing rules, that is, to continue the ancient rule of writing in eliminating the characters of “ ث و ح و ص و ض و ط و ظ و ع و ق” With the observation of this ancient rule we can gradually change these characters in to other ones, as it has been done with “ط” which has changed into “ت”. In continuation, it is possible to leave out some signs as in “Tashdid & Tanwin, Writing the words as they are spoken and leaving spaces between the words and characters. This section includes eight suggestion solutions. B) Conceptual rules, There are some different opinions as to writing words either separated or connected. With approving some general rules, it is possible to solve some of the problems of Persian writing instruction. In this article, I have tried to present to suggest some rules to facilitate learning Persian writing for both Persian and non- Persian speaking learners. پرونده مقاله -
دسترسی آزاد مقاله
203 - بررسی پالئواکولوژی و شرایط اقیانوسی دیرینه سازند خانگیران بر اساس عدم حضور ، ) Morozovellaفرامینیفر شاخص ائوسن
میر امیر صلاحی محمد وحیدی نیاحوضه رسوبی کپه داغ در شمال و شمال شرقی ایران قرار گرفته و سازند خانگیران یکی از مهمترین سازندهای متعلق به دورهپالئوژن این حوضه می باشد. برای مطالعه این سازند برش ناودیس چهل کمان واقع در جنوب غرب شهر سرخس، شرق حوضهرسوبی کپه داغ انتخاب گردید. این برش به ضخامت 136متر و لیت چکیده کاملحوضه رسوبی کپه داغ در شمال و شمال شرقی ایران قرار گرفته و سازند خانگیران یکی از مهمترین سازندهای متعلق به دورهپالئوژن این حوضه می باشد. برای مطالعه این سازند برش ناودیس چهل کمان واقع در جنوب غرب شهر سرخس، شرق حوضهرسوبی کپه داغ انتخاب گردید. این برش به ضخامت 136متر و لیتولوژی آن شامل تناوبی از مارن به رنگ سبز زیتونی و مارنآهکی به رنگ زرد کرمی می باشد. در این تحقیق فونای فرامینیفری سازند خانگیران مورد مطالعه قرار گرفت. این برش به سنائوسن پیشین - میانی از نظر فونای فرامینیفرهای پلانکتونیک نشان دهنده ناهنجاری هایی می باشد که بر این اساس عدم حضور، Morozovellaبه عنوان جنس شاخص ائوسن را می توان ذکر کرد. این امر با توجه به مطالعه فونای فرامینیفرهای پلانکتونیکو بنتونیک این سازند ناشی از شرایط یوتروفیک می باشد. این شرایط در نتیجه تغییرات رخ داده در شرایط اقیانوسی دیرینه، نظیروضعیت لایه بندی ستون آب و تغییرات مواد مغذی حاصل شده است. با توجه به اینکه Morozovellidها قادر نیستند خود را باشرایط یوتروفیک وفق دهند باعث عدم حضور گونه های این جنس در سازند خانگیران شده است. شرایط حاکم بر سازند خانگیرانقابل مقایسه با شرایط حاکم بر حوضه های واقع در منطقه قفقاز بوده و این امر می تواند نشان دهنده شرایط یکسان حوضه هایکپه داغ و منطقه قفقاز حداقل در طول ائوسن باشد پرونده مقاله -
دسترسی آزاد مقاله
204 - پتروگرافی رخساه های بخش های زیرین سازند لالون وتعیین محیط رسوبی آن در برش الگو،شمال شرق تهران
میرحسن موسوی نادر کهنسال امیدرضا باقرزادهخش زیرین سازند لالون در برش الگو عمدتاً ماسه سنگی میباشد. بر اساس مطالعات آزمایشگاهی و مشاهدات صحرایی بخشزیرین سازند لالون از چهار گروه رخسارهای ساب آرکوز، ساب سدآرنایت، فلدسپاتیک سدآرنایت و سدآرنایت تشیکل یافته است.دانههای اصلی تشکیل دهنده رخسارههای فوق کوارتز، خرده سن چکیده کاملخش زیرین سازند لالون در برش الگو عمدتاً ماسه سنگی میباشد. بر اساس مطالعات آزمایشگاهی و مشاهدات صحرایی بخشزیرین سازند لالون از چهار گروه رخسارهای ساب آرکوز، ساب سدآرنایت، فلدسپاتیک سدآرنایت و سدآرنایت تشیکل یافته است.دانههای اصلی تشکیل دهنده رخسارههای فوق کوارتز، خرده سنگ و فلدسپات میباشد. محیط رسوبی بخش زیرین سازند لالون دربرش الگو رودخانة مئاندری میباشد. نهشتههای بخش مذکور دارای سیکل رسوبی ریز شونده به سمت بالا است. لایه بندیهایمتقاطع و لامیناسیون ها و قالب رسوبات تبخیری از جمله ساختمان های رسوبی موجود در این سازند میباشد پرونده مقاله -
دسترسی آزاد مقاله
205 - مطالعه زیست چینهای و سنگ چینهای رسوبات ائوسن چاه هالگان در زاگرس چینخورده
فرشته قاسمی نیا بهاءالدین حمدیبه منظور مطالعه و بررسی زیست چینهای و سنگ چینهای رسوبات ائوسن چاه هالگان در زاگرس چینخورده تعداد 100مقطع نازکمیکروسکوپی مربوط به نمونههای این چاه مورد مطالعه قرار گرفته است. مطالعات مذکور منجر به شناسایی 12جنس و 25گونه از روزنبرانپلانکتونیک گردید. براساس انتشار چینهای ر چکیده کاملبه منظور مطالعه و بررسی زیست چینهای و سنگ چینهای رسوبات ائوسن چاه هالگان در زاگرس چینخورده تعداد 100مقطع نازکمیکروسکوپی مربوط به نمونههای این چاه مورد مطالعه قرار گرفته است. مطالعات مذکور منجر به شناسایی 12جنس و 25گونه از روزنبرانپلانکتونیک گردید. براساس انتشار چینهای روزنبران پلانکتون تعداد 3بیوزون ) ( P16/17 ، P13 ، P6که توسط & D.Verga) [2] R.Rettori (2003برای رسوبات ائوسن معرفی شده در این چاه تفکیک شده است. برش چینهای تحتالارضی نیز با بیوزونهایوایند ) [4] (wynd , 1965مقایسه شده است. بیوزونهای شناسایی و تفکیک شده بر اساس بیوزوناسیون وایند شامل بیوزونهای،47 ،4552میباشد. در این مقاله سازند پابده در چاه هالگان هم براساس بیوزون ) [2] D.Verga & R.Rettori (2003و هم بر اساسبیوزون وایند ) [4] ( wynd , 1965معرفی شده و با هم مقایسه شدهاند، که نتیجه این مقایسه نشان می دهد که بهترین بیوزونبندی برایسازند پابده در چاه هالگان بیوزون ) [2] D.Verga & R.Rettori (2003میباشد. سازند پابده در چاه هالگان شامل تناوبی ازلایههای شیل، مارن، آهک رسی غالباً به رنگ خاکستری و کرم میباشد. سازند پابده مختص نواحی عمیق دریا بوده و شاهدی برای عمیقبودن حوضه در این ناحیه در زمان ائوسن میباشد. طبق این مطالعات به نظر میرسد در زمان ائوسن ناحیه چاه هالگان کاملاً پوشیده از آببوده و بیشترین پیشروی دریا در آن زمان بوده است پرونده مقاله -
دسترسی آزاد مقاله
206 - بررسی رخساره ها، محیط های رسوبی و چینه نگاری سکانسی رسوبات سازند ساچون در برش زرقان (منطقه زاگرس چین خورده)
سولماز ارزاقی خسرو خسرو تهرانی مسیح افقهسازند تبخیرى ساچون از واحدهاى سنگ چینه نگاری رسمى جنوب غرب ایـران اسـت . ایـن سـازند در بـرش زرقـان بـا سـتبرای/ 259 6متر شامل لایه های متناوب از رسوبات شیل/مارن های رنگین ، تبخیری و کربنات است و در بین رسوبات سازند های تاربوردر بالا ورسوبات سازند جهرم در پایین قرار دار چکیده کاملسازند تبخیرى ساچون از واحدهاى سنگ چینه نگاری رسمى جنوب غرب ایـران اسـت . ایـن سـازند در بـرش زرقـان بـا سـتبرای/ 259 6متر شامل لایه های متناوب از رسوبات شیل/مارن های رنگین ، تبخیری و کربنات است و در بین رسوبات سازند های تاربوردر بالا ورسوبات سازند جهرم در پایین قرار دارد. در برش زرقان، سازند ساچون دارای مرزپایینی از نوع ناپیوسته بـا سـازند تـاربورو مرز بالایی پیوسته و هم شیب با سازند جهرم می باشد. رخساره های کربناته، تبخیری و آواری در مطالعه رسوبات سـازند سـاچوندر برش زرقان )زون زاگرس چین خورده(، شناسایی گردیده است که در دو کمربند رخساره ای پهنه جزر و مـدی و لاگـون تقسـیمبندی می شوند. مجموعا 11رخساره و زیر رخساره شناسایی گردیده است .5رخساره در کمربنـد رخسـاره ای پهنـه جـزر و مـدی4رخساره و زیر رخساره در کمربند رخساره ای لاگون قرار می گیرند و 2رخساره آواری نیز شناسایی گردیده است. ضخامت زیـادرخساره های محیط کم عمق و نبودن رخساره هایی که در محیط های عمیق ایجاد می شوند، نشان می دهـد کـه حوضـه رسـوبگذاریسازند ساچون یک پلاتفرم رمپ بوده است.در چینه نگاری سکانسی برش زرقان سازند ساچون، یک سکانس رسوبی شناسائی شـدهاست. یک مرز نوع 1در پائین با سازند تاربور آن را محدود می کنند پرونده مقاله -
دسترسی آزاد مقاله
207 - مطالعه رخساره ها و تاریخچه رسوبگذاری سازند مزدوران، در رخنمون صالح آباد، شمال شرق ایران
سید حمید رضا اعظمی مهدی رضاپورسلطانی محسن علامهسازند مزدوران با ضخامت 165متر، بعنوان یک توالی کربناته و آواری در برش صالح آباد شامل سنگ های کربناته، آهـک ماسـه ایو سیلیسی آواری است. سازند مزدوران با سن )آکسفوردین- کیمبریجین(، به طور همشـیب بـر روی سـازند کشـف رود و در زیـرسازند شوریجه قرار گرفته است. اهداف مورد مطال چکیده کاملسازند مزدوران با ضخامت 165متر، بعنوان یک توالی کربناته و آواری در برش صالح آباد شامل سنگ های کربناته، آهـک ماسـه ایو سیلیسی آواری است. سازند مزدوران با سن )آکسفوردین- کیمبریجین(، به طور همشـیب بـر روی سـازند کشـف رود و در زیـرسازند شوریجه قرار گرفته است. اهداف مورد مطالعه شامل شناسایی و تفکیـک رخسـاره هـای سـنگی سـازند مـزدوران و بررسـیتغییرات عمودی و جانبی واحدهای سنگ چینه ای، شناسایی، تفکیک و نامگذاری رخساره های میکروسکوپی بر اساس مقاطع نازکسنگی، شناسایی و تفسیر رخدادهای دیاژنتیکی بر اساس شواهد پتروگرافی، تفسیر تاریخچه رسوبگذاری بـا اسـتفاده از خصوصـیاترخساره های سنگی و ارائه مدل رسوبگذاری می باشد. بر اساس مطالعات سنگ شناسی حدود 50مقطع میکروسکوپی، 2مجموعـهرخساره شناسایی گردیده است. مجموعه رخساره آهکی شامل گرینستون بایو کلستی دارای میلیولید )رخساره ،Aمربوط بـه محـیطلاگونی(، گرینستون اائیدی ماسه ای و گرینستون اائیدی و گرینستون اائیدی بایو کلست دار )رخساره ،Bمربـوط بـه محـیط سـدی(و مجموعه رخساره سیلیسی آواری که به طور عمده از چرت آرنایت و ساب لیتارنایت )رخساره ،Cمربوط به محیط جـزر و مـدی(می باشد. بنابر رخساره های سنگی، محیط رسوبی سازند مزدوران یک پلت فرم کربناته تفسیر می گردد پرونده مقاله -
دسترسی آزاد مقاله
208 - میکروبیواستراتیگرافی نهشته های سازند آسماری در برش کوه دراک دشت شیراز
خسرو خسرو تهرانی فریده کشانی مسیح افقه معصومه احمدینهشته های سازند آسماری در برش کوه دراک دارای ضخامت 333/5متر می باشد.این سازند در بـرش مـورد مطالعـه بـا نـا پیوسـتگیفرسایشی روی سازند جهرم قرار گرفته است و با ناپیوستگی تدریجی در زیر مارن های رنگین سازند رازک قـرار مـی گیـرد. از لحـاظلیتولوژیکی این سازند بطور عمده از سن چکیده کاملنهشته های سازند آسماری در برش کوه دراک دارای ضخامت 333/5متر می باشد.این سازند در بـرش مـورد مطالعـه بـا نـا پیوسـتگیفرسایشی روی سازند جهرم قرار گرفته است و با ناپیوستگی تدریجی در زیر مارن های رنگین سازند رازک قـرار مـی گیـرد. از لحـاظلیتولوژیکی این سازند بطور عمده از سنگ های آهکی تشکیل شده است. بر اساس مطالعات انجام شده سازند آسماری در بـرش مـوردمطالعه قابل تفکیک به سه واحد سنگ چینه ای می باشد.واحد اول متعلق به الیگوسن)روپلین- شاتین( و واحـد دوم و سـوم متعلـق بـهمیوسن)اکیتانین( مـی باشـد. بـه دلیـل حضـور گسـترده فرامنیفرهـای بنتیـک، مطالعـات بیواسـتراتیگرافی بـا توجـه بـه پراکنـدگی ایـنمیکروفسیل ها انجام شده است. بررسی 121مقطع نازک در برش کـوه دراک منجـر بـه شناسـایی تعـداد 31جـنس و تعـداد 38گونـهفرامنیفرهای بنتیـک گردیـد.از نظـر سـن نسـبی، سـازند آسـماری در بـرش مـورد مطالعـه متعلـق بـه الیگوسـن)روپلـین- شـاتین( تـامیوسن)اکیتانین( می باشد. با توجه به نتایج حاصل از مطالعات زیست چینه ای، این سازند در برش مورد مطالعه با بیوزون هـای شـماره3و 2آدامز و بورژوآ ] [5و بیوزون های شماره 58،57و 59وایند ] [16قابل انطباق می باشد پرونده مقاله -
دسترسی آزاد مقاله
209 - میکروفاسیس و محیط رسوبی سازند قم در منطقه خورآباد -ورجون
کیوان خاکسار معصومه سهرابی ملا یوسفی سعید رحمانیانسازند قم در برش منطقه خورآباد -ورجون با ضخامت 852 متر متشکل از سنگ آهکی نازک تا ضخیم لایه ،مارن،مارن گچ دار،ماسه سنگ و ماسه سنگ آهکی می باشد.مرز زیرین آن (بخشa) با سازند قرمز زیرین به صورت ناگهانی و با دگر شیبی خفیف است،ولی مرز بالایی آن (بخشf) با سازند قرمز بالایی به ش چکیده کاملسازند قم در برش منطقه خورآباد -ورجون با ضخامت 852 متر متشکل از سنگ آهکی نازک تا ضخیم لایه ،مارن،مارن گچ دار،ماسه سنگ و ماسه سنگ آهکی می باشد.مرز زیرین آن (بخشa) با سازند قرمز زیرین به صورت ناگهانی و با دگر شیبی خفیف است،ولی مرز بالایی آن (بخشf) با سازند قرمز بالایی به شکل تدریجی و هم شیب است. همزمان با نمونه برداری،تغییرات لیتولوژی،چینه شناسی و ژئومورفولوژی واحدهای سنگی نیز مورد بررسی قرار گرفتند که نتایج آن منجر به ترسیم ستون چینه شناسی سازند قم در محدوده مورد مطالعه گردید،نتایج حاصل از برسی های پتروگرافی و میکروفاسیس در کنار نتایج حاصل از بررسی های صحرایی منجر به تفکیک و تشخیص 8 میکروفاسیس کربناته در بخش های مختلف سازند قم گردید،این میکروفاسیس ها در محیط های جزر و مدی،سد،لاگون و دریای باز واقع شده است.بررسی رخساره ها و ترتیب توالی آنها در منطقه مورد نظر و مقایسه آنها با محیط های رسوبی امروزی و قدیمی نشان می دهد که رسوب گذاری این سازند در یک محیط دریایی گرم صورت پذیرفته است.همچنین رخساره های سازند قم در مقطع مورد مطالعه،در یک رمپ کربناته نهشته شده اند. پرونده مقاله -
دسترسی آزاد مقاله
210 - زیست چینه شناسی و میکروفاسیس سازند سروک در چاه X-01 میدان نفتی بهرگانسر،خلیج فارس
کیانا کیا رستمی سید حمید وزیری معصومه سهرابی ملایوسفی بیژن نوریمیدان نفتی بهرگانسر یکی از میادین نفتی واقع در دامنه جنوبی فروافتادگی دزفول و در شمال غرب خلیج فارس واقع شده است.جهت مطالعات زیست چینه ای سنگهای آهکی میدان نفتی مذکور تعداد 56 مقطع نازک مربوط به سازند سروک مورد مطالعه قرار گرفته است.در سازند مذکور 11 گونه از 17 جنس فس چکیده کاملمیدان نفتی بهرگانسر یکی از میادین نفتی واقع در دامنه جنوبی فروافتادگی دزفول و در شمال غرب خلیج فارس واقع شده است.جهت مطالعات زیست چینه ای سنگهای آهکی میدان نفتی مذکور تعداد 56 مقطع نازک مربوط به سازند سروک مورد مطالعه قرار گرفته است.در سازند مذکور 11 گونه از 17 جنس فسیلی شناسایی شدند که بر اساس انها،می توان سه زون زیستی را که با زیست زونهای معرفی شده توسط وایند(1965)مطابقت دارند معرفی نمود. I-Nezzazata– Alveolinids Assemblage Zone# 25 , II-Rudist debris# 24, III- "Oligostegina"facies# 26 بر اساس زون های زیستی معرفی شده سن سازند سروک سنومانین تعیین شد که از رخساره های پلاژیک و نریتیک تشکیل شده است.در مطالعه حاضر مرز تحتانی سازند سروک با سازند کژدمی از نوع پیوسته و مرز فوقانی آن با سازند ایلام از نوع ناپیوستگی فرسایشی می باشد.5 میکروفاسیس در سازند مذکور شناسایی شدند که نشانگر ته نشست سازند سروک در محیط های دریای باز،سد و مرداب است.با توجه به تفسیر رخساره ها بایوفاسیس ها و نهایتا معرفی مدل رسوبی سازند سروک در چاه مورد مطالعه محیط رسوبی سازند سروک یک پلت فرم کربناته از نوع رمپ می باشد پرونده مقاله -
دسترسی آزاد مقاله
211 - میکروفاسیس ها و محیط رسوبی بخش کربناته سازند قلعه دختر واقع در کوه بیرگ(جنوب شهرستان سرایان-خراسان جنوبی)
عایشه سلمانی غلامرضا میراب شبستری محمد حسین ادابی سید علی آقانباتیهدف از انجام این تحقیق ،تعیین میکروفاسیس ها و محیط رسوبی بخش کربناته سازند قلعه دختر (ژوراسیک میانی تا بالایی)بر اساس مشاهدات صحرایی و مطالعات آزمایشگاهی می باشد.منطقه مورد مطالعه در کوه بیرگ واقع در جنوب شهر سرایان (استان خراسان جنوبی) قرار دارد.ضخامت توالی مذکور در بر چکیده کاملهدف از انجام این تحقیق ،تعیین میکروفاسیس ها و محیط رسوبی بخش کربناته سازند قلعه دختر (ژوراسیک میانی تا بالایی)بر اساس مشاهدات صحرایی و مطالعات آزمایشگاهی می باشد.منطقه مورد مطالعه در کوه بیرگ واقع در جنوب شهر سرایان (استان خراسان جنوبی) قرار دارد.ضخامت توالی مذکور در برش مورد مطالعه 188 متر است که بیشتر شامل آهک هایی از نوع وکستون بایوکلستی حاوی سوزن اسفنج ،وکستون اینتر اکلستی وولیتی،پکستون پلوئیدی،پکستون اینتر اکلستی،وکستون اینتر اکلستی/بایوکلستی و وکستون جلبکی می باشد.بر اساس مطالعات پترو گرافی قطعات اسکلتی سازند قلعه دختر در برش مورد مطالعه از قطعات خار پوست،باکیوپود،سوزن اسفنج،جلبکها،مرجان ها و فرامینیفرها و همچنین پلوئید ها،اینتراکلست ها و آنکوئیدها به عنوان ذرات غیر اسکلتی تشکیل شده است.به طور کلی هفت میکروفاسیس مربوط به محیط های دریای باز ،سد و لاگون شناسایی گردیده است.ب اساس اطلاعات به دست آمده می توان نتیجه گرفت که در منطقه مورد مطالعه بخش کربناته سازند قلعه دختر در یک پلاتفرم کربناته دریایی از نوع فلات حاشیه دار نهشته شده است. پرونده مقاله -
دسترسی آزاد مقاله
212 - پالینوفاسیس و محیط دیرینه سازند گورپی در برش خرامه
نرگس خوش خبر ابراهیم قاسمی نژاد معصومه سهرابی ملایوسفیبه دلیل عدم حفظ شدگی مناسب پالینومرف ها ، سازند گورپی در برش خرامه در 84کیلومتری شرق شیراز با استفاده از فرامینیفرهابه 5زون تفکیک گردید. بر مبنای حضور جنس Globotruncana elevataدر قاعده، سن سازند گورپی از کامپانین پیشین شروعمی گردد . مرز بالایی این سازند با لایه های سازن چکیده کاملبه دلیل عدم حفظ شدگی مناسب پالینومرف ها ، سازند گورپی در برش خرامه در 84کیلومتری شرق شیراز با استفاده از فرامینیفرهابه 5زون تفکیک گردید. بر مبنای حضور جنس Globotruncana elevataدر قاعده، سن سازند گورپی از کامپانین پیشین شروعمی گردد . مرز بالایی این سازند با لایه های سازند تاربور براساس وجود Gansserina gansseriتعیین گردید که بـه سـن مـائستریشتین پیشین می رسد. در بررسی تفسیر محیط رسوبی دیرینه ) (Paleoecologyبا بهره گیری از عوامـل حفاظـت از مـواد آلـی،محیط بی هوازی تا نیمه هوازی و در انتها ی آن دارای اکسیژن تعیین گردید. جهت بررسی پالینوفاسیس سـازند گـورپی از دیـاگراممثلثی Tyson 1993استفاده شد که بر مینای درصد عناصر ) AOMمواد آلی بدون ساختمان (، ) Phytoclastشامل اسپور ، پـولنوخرده های چوب( و ) Palynomrphsشامل پالینومرف های دریایی به همراه آستر داخلی فرامینیفرها( می باشد. با توجه به درصداین سه عامل برای این سازند سه رخساره پالینولوژیکی شامل فاسیس های II, III, IXتعیین گردید. محیط دیرینـه در نظـر گرفتـهشده با توجه به فاسیس های تعیین شده حاشیه حوضه تا حوضه عمیق کم اکسیژن – فاقد اکسیژن می باشد پرونده مقاله -
دسترسی آزاد مقاله
213 - میکروبیواستراتیگرافی سازند تاربور در نواحی جنوب شرق شیراز
معصومه عزیزی مسیح افقهدر این تحقیق، دو مقطع چینه شناسی از سازند تاربور شامل مقاطع چینه شناسی داراب و شش ده مورد بررسی قرار گرفته است. در مجموعبا برداشت 333متر از رسوبات این سازند فرامینی فرهای موجود در 328مقطع نازک میکروسکپی به دقت شناسایی شد. بررسی های انجامشده نشان میدهند که سازند تاربور ا چکیده کاملدر این تحقیق، دو مقطع چینه شناسی از سازند تاربور شامل مقاطع چینه شناسی داراب و شش ده مورد بررسی قرار گرفته است. در مجموعبا برداشت 333متر از رسوبات این سازند فرامینی فرهای موجود در 328مقطع نازک میکروسکپی به دقت شناسایی شد. بررسی های انجامشده نشان میدهند که سازند تاربور از نظر سنگ چینه ای در برش چینه شناسی داراب شامل دو بخش آهکهای نازک لایه و ضخیم لایه ودر برش چینهشناسی شش ده شامل سه بخش آهکهای نازک لایه، متوسط لایه و ضخیم لایه میباشد. فرامینی فرهای شاخص شناخته شدهدر این مقاطع چینهشناسی شامل گونههای زیر است:Orbitoides media, Omphalocyclus macroporus, Dicyclina schulumbergri, Dicyclina sp., Dictyoconellasp., Dicytoconella compalanta, Minoxia sp., Nezzazatinella sp., Rotalia sp., Rotalia skouransis, Antaliyakorayi, Antalya sp., Broekinella sp., Lepidorbitoedes sp, Siderolites sp. , Loftusia minor , Salpingoporellaturgida, Salpingoporella dinarica, Vania anatolicaبرای سازندOrbitoides media & Omphalocyclus macroporus Assemblage Zon با توجه به فرامینی فرهای فوق، زونآهکی تاربور معرفی شد. از شواهد فوق می توان نتیجه گرفت که سن سازند تاربور در برش چینه شناسی داراب ماستریشتین – پالئوسن ودربرش چینه شناسی شش ده ماستریشتین می باشد پرونده مقاله -
دسترسی آزاد مقاله
214 - محیط رسوبی و چینه نگاری سکانسی سازند کنگان در میدان کیش
مریم پیروی محمدرضا کمالی حسین رحیم پور بنابسازند کنگان به سن تریاس زیرین، مهمترین سنگ مخزن هیدروکربنی در جنوب باختری ایران و خلـیج فـارس بـوده کـه در گـروهدهرم جای دارد. مطالعات پتروگرافی مغزه و خرده های حاصل از حفاری این سازند در میدان کیش واقع در خلیج فـارس حـاکی ازآن است که سازند کنگان از چهارده رخساره میکروس چکیده کاملسازند کنگان به سن تریاس زیرین، مهمترین سنگ مخزن هیدروکربنی در جنوب باختری ایران و خلـیج فـارس بـوده کـه در گـروهدهرم جای دارد. مطالعات پتروگرافی مغزه و خرده های حاصل از حفاری این سازند در میدان کیش واقع در خلیج فـارس حـاکی ازآن است که سازند کنگان از چهارده رخساره میکروسکوپی تشکیل شده که در کمربندهای رخسارهای پهنه کشندی، تالاب پشت سدو سد االیتی نهشته شده اند. مجموعه رخسارهها و کمربندهای رخسارهای نشاندهنـده رسـوبگذاری در بخـش داخلـی یـک پلاتفـرمکربناته از نوع رمپ هوموکلینال است. تغییرات عمودی رخساره ها و بررسی لاگ های ژئوفیزیکی به ویژه لاگ گاما نشان دهنده سـهسکانس رسوبی رده سوم است. مرز بین سکانس ها ناپیوستگی نوع دو است. هر سـکانس از دسـته رخسـارهای) TSTدر برگیرنـدهرخسارههای تالاب پشت سد و پهنه کشندی( و ) HSTدربردارنده رخسارههای سدی( ساخته شده است پرونده مقاله -
دسترسی آزاد مقاله
215 - میکروفاسیس ها،محیط رسوبی و چینه نگاری سکانسی سازند داریان درشمال شیراز
داود جهانی مازیار نظریان داریوش باغبانیسازند داریان یکی از مخازن مهم نفتی در جنوب غرب ایران است. در این مطالعه، میکروفاسیسها، محیط رسوبی و چینهنگاریسکانسی سازند داریان در تاقدیسهای سیوند و دشتک در شمال شیراز )زاگرس مرتفع( بررسی شده است. ستبرای این سازند دربرش سیوند 330متر و در برش دشتک 263متر بوده و به طور ع چکیده کاملسازند داریان یکی از مخازن مهم نفتی در جنوب غرب ایران است. در این مطالعه، میکروفاسیسها، محیط رسوبی و چینهنگاریسکانسی سازند داریان در تاقدیسهای سیوند و دشتک در شمال شیراز )زاگرس مرتفع( بررسی شده است. ستبرای این سازند دربرش سیوند 330متر و در برش دشتک 263متر بوده و به طور عمده در برگیرنده سنگ آهک با میان لایههای شیل است. سازندداریان در نواحی مورد مطالعه با همبری پیوسته بر روی سازند گدوان و با همبری ناپیوسته در زیر سازند کژدمی جای دارد.بررسیهای صحرایی و آزمایشگاهی سازند داریان منجر به شناسایی سه دسته رخسارهای و 11میکروفاسیس وابسته به محیطهایدریای باز، سد و تالاب شده است. این رخساره ها در یک پلاتفرم کربناته نوع شلف حاشیه دار پدید آمده اند. بررسی تغییراتعمودی رخساره های سازند داریان نشان دهنده ی وجود یک سکانس رسوبی )چرخه دسته سوم( است، به طوری که بخش پایینیدسته رخساره ای پیشرونده ) (TSTاین سکانس در سازند گدوان بوده و دسته رخسارهای پسرونده ) (HSTآن با ناپیوستگی نوعSB1از سازند کژدمی جدا میشود پرونده مقاله -
دسترسی آزاد مقاله
216 - ارزیابی پتروفیزیکی سازند آسماری در میدان نفتی قلعه نار واقع در فروافتادگی دزفول
اکرم عیوضی نژاد مهدی زارعمیدان نفتی قلعه نار در 40 کیلومتری شمال شهرستان اندیمشک واقع شده و دارای دو مخزن به نامهای سازند آسماری و گروه بنگستان است.سازند آسماری با ترکیب سنگ شناسی ماسه سنگ آهکی،آهک ماسه ای با میان لایه های شیل یکی از مهمترین مخازن فروافتادگی دزفول به شمار می رود.به همین منظور د چکیده کاملمیدان نفتی قلعه نار در 40 کیلومتری شمال شهرستان اندیمشک واقع شده و دارای دو مخزن به نامهای سازند آسماری و گروه بنگستان است.سازند آسماری با ترکیب سنگ شناسی ماسه سنگ آهکی،آهک ماسه ای با میان لایه های شیل یکی از مهمترین مخازن فروافتادگی دزفول به شمار می رود.به همین منظور در این مقاله به ارزیابی پتروفیزیکی سازند آسماری با استفاده از نرم افزارGeolog پرداخته می شود که شامل تعیین ترکیب سنگ شناسی،حجم شیل ،تخلخل و اشباع آب است.بر همین اساس مناطقی که از لحاظ اقتصادی مناسب بهره برداری هستند،شناسایی شده است که شاما منطقه A1 دارای میانگین تخلخل 2%،میانگین اشباع آب 55%و میانگین حجم شیل 7.5% است.منطقه A2 دارای میانگین تخلخل 12%،میانگین اشباع آب 45% و میانگین حجم شیل 37.5%،منطقه A3 دارای میانگین تخلخل 5% ،میانگین اشباع آب 40% و میانگین حجم شیل 35% است.در مقایسه با میدانهای نفتی کخزن آسماری در فرو افتادگی دزفول مناطق A1 وA2 میدان نفتی قلعه نار از لحاظ تخلخل و اشباع آب شرایط مشابهی از نظر کیفیت مخزنی با چاهBH-51 میدان نفتی بی بی حکیمه دارند.اما به علت وسعت کم میدان نفتی قلعه نار استراج از میدان نفتی بی بی حکیمه اقتصادی تر به نظر می رشد.میدان نفتی قلعه نار تخلخل کمتری را نسبت به نتایج آنالیز مغزه در میدان نفتی اهواز نشان می دهد،لذا توان اقتصادی میدان نفتی قلعه نار به مراتب کمتر از میدان اهواز است. پرونده مقاله -
دسترسی آزاد مقاله
217 - بررسی شیمی کانیها و مروری بر پترولوژی توده نفوذی منطقه مبارکآباد
علی اصغر پرچگانی محمد علی آرین محمد فودازیدر 75 کیلومتری شمال شرق تهران و در منطقه مبارکآباد، یک دایک بزرگ با ابعاد 6 کیلومتر در 500 متر با راستای غرب - شمال غربی، شرق - جنوب شرقی به داخل یکی از انشعابات گسل مشا - فشم تزریق شده است.این توده به درون سازند کرج (ائوسن میانی) تزریق شده لذا سنی جوان تر از ائوسن میا چکیده کاملدر 75 کیلومتری شمال شرق تهران و در منطقه مبارکآباد، یک دایک بزرگ با ابعاد 6 کیلومتر در 500 متر با راستای غرب - شمال غربی، شرق - جنوب شرقی به داخل یکی از انشعابات گسل مشا - فشم تزریق شده است.این توده به درون سازند کرج (ائوسن میانی) تزریق شده لذا سنی جوان تر از ائوسن میانی را دارد و از نظر سنگ شناسی شامل الیوین گابرو، گابرو، دیوریت و سینودیوریت میباشد. الیوین گابروها ملانوکرات است و کانیهای تشکیل دهندهی آنها شامل اوژیت، بیتوونیت(An76)، لابرادوریت(An50)، هیالوسیدریت(الیوین) و بیوتیت و کانیهای فرعی اورالیت و اوپک میباشد. در ملاگابرو به ندرت آثار تجزیه شدگی دیده میشود و کانیهای ثانویه در این سنگ کلریت، سرپانتین و سوسوریت است. گابروها لوکوکرات هستند و آثار تجزیه شدگی شدید در آنها به چشم میخورد، اوژیت و لابرادوریت بخش اعظم این سنگها را تشکیل میدهد. دیوریتها در این منطقه پلاژیوکلاز از نوع آندزین، هورنبلند و اوژیت به عنوان کانیهای اصلی و فلدسپار آلکالن و مگنتیت به عنوان کانیهای فرعی تشکیل شدهاند. ماگماتیسم این منطقه از نوع کالکوآلکالن سدیک بوده، که دارای ماهیتی متاآلومین تا پرآلومین می باشد. تغییر و تحولات عناصر اصلی نشان دهندهی وجود یک ارتباط زایشی و ژنیتیکی بین انواع مختلف ترمهای سنگ های نفوذی در منطقه است. پرونده مقاله -
دسترسی آزاد مقاله
218 - ارزیابی خواص مخزنی سازندهای کنگان ودالان در میدان گازی پارس جنوبی از نگارهای چاه پیمایی
میترا نوذری بهرام موحد سیدحمید وزیریمیدان گاز پارس جنوبی یکی از میادین جنوب غربی ایران در حوضه ی رسوبی زاگرس بوده و شامل دو مخزن کنگان و دالان است .سازندهای کنگان و دالان به گروه دهرم تعلق دارند و از مهمترین مخازن گازی در ناحیه خلیج فارس محسوب می شوند ارزیابی خواص پترویزیکی در چاه مورد مطالعه با استفاده ا چکیده کاملمیدان گاز پارس جنوبی یکی از میادین جنوب غربی ایران در حوضه ی رسوبی زاگرس بوده و شامل دو مخزن کنگان و دالان است .سازندهای کنگان و دالان به گروه دهرم تعلق دارند و از مهمترین مخازن گازی در ناحیه خلیج فارس محسوب می شوند ارزیابی خواص پترویزیکی در چاه مورد مطالعه با استفاده از اطلاعات نمودارهای چاه پیمایی و بهره گیری از نرم افزار تخصصی geolog6.6 و روش ارزیابی پتروفیزیک احتمالی (probabilistic) انجام گرفت .برای اندازه گیری دقیق تصحیحات لازم بر روی نمودارها با در نظر گرفتن محل های ریختگی ،اثرات محیطی،اثرات گازو شیل انجام شد.بعد از انجام تصحیحات لیتولوژی سازندهای کنگان و دالان با استفاده از کراس پلات نوترون-چگالی تعیین شد.آنالیز فوق نشان می دهد که این سازندها اساسا آهکی و در بعضی فواصل دولومیتی است با توجه به لیتولوژی،حجم شیل،حضور نهشته های تبخیری و تخلخل سازند کنگان به دو بخش K1وK2 و همچنین سازند دالان به دو بخش K3 وK4 تفکیک می شود .نتایج به دست آمده نشان می دهد که بخش K2 سازند کنگان و بخش K4 سازند دالان از نظر مقدار اشباع شدگی،تخلخل و لیتولوژی شرایط یک مخزن مناسب را دارد میانگین تخلخل موثر و اشباع آب موثر برای سازند کنگان به ترتیب 9.7% و9.45% و برای سازند دالان 8.2% و 8.65% به دست آمده است. پرونده مقاله -
دسترسی آزاد مقاله
219 - تطابق چینه شناسی و تغییرات محیطی نهشته ای سازند روته در البرز
معصومه الیاسی راد جعفر قمی اویلیبرای بررسی تطابق چینه شناسی و تغییرات محیطی نهشته های سازند در حوضه البرز چهار برش چینه شناسی در ناحیه البرز مرکزی (جنوب نوشهر،چالوس و آمل) و البرز شرقی (غزنوی)مورد مطالعه قرار گرفته است.لیتولوژی سازند روته در حوضه البرز اغلب از سنگ آهک صخره ساز بوده و نهشته های این ساز چکیده کاملبرای بررسی تطابق چینه شناسی و تغییرات محیطی نهشته های سازند در حوضه البرز چهار برش چینه شناسی در ناحیه البرز مرکزی (جنوب نوشهر،چالوس و آمل) و البرز شرقی (غزنوی)مورد مطالعه قرار گرفته است.لیتولوژی سازند روته در حوضه البرز اغلب از سنگ آهک صخره ساز بوده و نهشته های این سازند با رخساره های آواری و رخساره های کربناته(سنگ آهک و دولومیت) مشخص می شوند.این نهشته ها ضخامت زیادی داشته که در برشهای مختلف این ضخامت متغیر بوده است،به گونه ای که ضخامت سازند روته در مقطع منجیر(جنوب نوشهر)493 متر،در برش شمال غربی هریجان(چالوس)200 متر،در مقطع آمل 480 متر و در برش غزنوی(البرز شرقی)این ضخامت به 115 متر می رسد.سن سازند روته با توجه به فسیل های به دست آمده در این برشها آرتینسکین-مرغابین تعیین شده است.براساس مطالعات صحرایی و مقاطع نازک 4 مجموعه رخساره ای که عبارتند از:پهنه جزر و مد(Tidal Flat)،سدی (Barrier)،لاگون(Lagoon)و دریای باز (Open Marine) مورد شناسایی قرار گرفتند. پرونده مقاله -
دسترسی آزاد مقاله
220 - تحلیل گفتار آغازین در مکالمه داستانی: بررسی موردی "ترغیب" آستین
نعیمه نادرری دکتر علی اکبر معین دکتر سیما صیادیانمقوله ی خوانایی جملات طولانی در ترجمه ی متون علمی در دنیا بطور چشمگیری مورد توجه قرار گرفته است. این موضوع همچنین در ترجمه متون انگلیسی به فارسی در ایران نیاز به توجه بیشتری دارد تا پیچیدگی فهم متون علمی را آسان کند. مطالعه کمی حاضر در نظر دارد تا بر پایه ی مجموعه ای از چکیده کاملمقوله ی خوانایی جملات طولانی در ترجمه ی متون علمی در دنیا بطور چشمگیری مورد توجه قرار گرفته است. این موضوع همچنین در ترجمه متون انگلیسی به فارسی در ایران نیاز به توجه بیشتری دارد تا پیچیدگی فهم متون علمی را آسان کند. مطالعه کمی حاضر در نظر دارد تا بر پایه ی مجموعه ای از نوشتجات خوانایی متون علمی دارای جملات طولانی را بررسی کند. بنابراین خوانایی جملات طولانی انگلیسی یک کتاب ژنتیک درپزشکی با جملات ترجمه فارسی همان کتاب مقایسه شد. مدل مقایسه ای سبکی وینی و داربلنت (1958) بکار گرفته شد تا به راهکارهایی که برای ترجمه جملات طولانی بکار برده شده و خوانایی آنها را تحت تاثیر قرار داده، دسترسی پیدا کند. همچنین از فرمول لیکس (Lix) جهت محاسبه ی خوانایی جملات طولانی در هر دو متن انگلیسی و فارسی استفاده شد. یافته ها نشان دادند که مهمترین دلایل افزایش خوانایی این ترجمه از این قرارند: شکستن جملات طولانی، تبدیل بدل به جملات وابسته و اسم به فعل که باعث کاهش نسبت بین تعداد اسم ها و فعل ها می شود، و تبدیل کلمات دارای مفهوم انتزاعی به کلماتی با مفهوم واقعی، این راهکار مادیولیشن نام دارد، کلمات طولانی و پیچیده کمتر به کار برده شود و جملات مجهول به جملات معلوم تبدیل شود. پرونده مقاله -
دسترسی آزاد مقاله
221 - بررسی تطبیقی امشاسپندان در آیین زرتشتی و اعیان ثابته در عرفان نظری
سعید محمدی کیشاعیان ثابته در عرفان نظری، صور علمیه الهی هستند که در فیض مقدس، به کالبد عالم وارد شده اند، اعیان در علم الهی ثابت اند که تنها یک بار در ازل تحدید یافته اند و در کسوت اسماء و صفات، مظهر ذات حق تعالی گشته اند. این پژوهش مطالعه ای نظری است که به شیوه پژوهش کتابخانه ای و چکیده کاملاعیان ثابته در عرفان نظری، صور علمیه الهی هستند که در فیض مقدس، به کالبد عالم وارد شده اند، اعیان در علم الهی ثابت اند که تنها یک بار در ازل تحدید یافته اند و در کسوت اسماء و صفات، مظهر ذات حق تعالی گشته اند. این پژوهش مطالعه ای نظری است که به شیوه پژوهش کتابخانه ای و توصیف و تطبیق دادهها، تفسیر مترادف اعیان ثابته را به شیوۀ توصیفی - تطبیقی در آیین کهن زرتشتی مورد بررسی قرار می دهد. هدف از پژوهش حاضر بررسی شباهت های بنیادی این دو نگرش آیینی و عرفانی است. در اشاره به یافتههای تحقیق میتوان گفت که صور معنوی عالم در آئین زرتشتی، امشاسپندان فرَوَشی نام دارند که همانند اعیان، پیش از آفرینش هستی، خلق گردیده اند و در کالبد گیتایی قرار گرفته اند، آن ها در تجلی اسماء و صفات، مظاهر اهورامزدا در عالم گیتایی هستند. در هر دو نگرش به عهد الست و اقرار به رسالت بندگی اشاره شده است. علم الهی در آن ها ثابت است و در حقایق علمی موجودات، تعاریفی یکسان با یکدیگر دارند. پرونده مقاله -
دسترسی آزاد مقاله
222 - مطالعه پارامتر های موثر بر سرعت پرتابه ها با استفاده از نیروی الکترومغناطیس
ساسان امینیان دهکردی امین کلاهدوز محسن لوح موسوینیروی الکترومغناطیس یکی از نیرو های بنیادی و پرکاربرد در صنعت می باشد . در صورت افزایش این نیرو می تواند در صنعت های شکل دهی ، مونتاژ کاری ، جوشکاری و شتاب دهی مورد استفاده قرار گیرد . شتاب اجسام و سرعت گرفتن آنها یکی از کاربرد های دیگر نیروی الکترومغناطیس است. با قرار چکیده کاملنیروی الکترومغناطیس یکی از نیرو های بنیادی و پرکاربرد در صنعت می باشد . در صورت افزایش این نیرو می تواند در صنعت های شکل دهی ، مونتاژ کاری ، جوشکاری و شتاب دهی مورد استفاده قرار گیرد . شتاب اجسام و سرعت گرفتن آنها یکی از کاربرد های دیگر نیروی الکترومغناطیس است. با قرار گرفتن جسمی در میدان مغناطیسی شدید و لحظه ای، باعث شتاب گرفتن و افزایش سرعت آن می شود. با توجه به اینکه نیروی الکترومغناطیس نسبت به سایر نیرو های پاک تر و بدون صدا می باشد از این رو از شتاب دهی جهت پرتاب هواپیما ها جهت جایگزین نیروی فنر ، پرتاب پرتابه ها به جای استفاده از نیروی باد و یا باروت استفاده نمود . هدف اصلی در این تحقیق استفاده از نیروی الکترومغناطیس در پرتاب پرتابه ها می باشد. جهت انجام این کار ابتدا دستگاه تامین کننده انرژی الکترومغناطیس ساخته می شود. در ادامه کار با مطالعه و انتخاب پارامتر های قطر سیم سیم پیچ ، طول سیم پیچ ، تعداد لایه ، جنس لوله ، ولتاژ و وزن و طول پرتابه، تاثیر هر یک از پارامتر ها بر روی سرعت پرتابه ها بررسی می شود. پرونده مقاله -
دسترسی آزاد مقاله
223 - بررسی عددی و تجربی پارامترهای تعداد دور سیمپیچ و ولتاژ در شکلدهی الکترومغناطیس صفحات آلومینیوم آلیاژ 1050
سجاد نادیان برسیانی احمد کشاورزی امین کلاهدوزبا پیشرفت علم دانشمندان روشهای جدید را جایگزین روشهای قدیمی میکنند. امروزه خودرو سازان جهت کاهش وزن خودروها از ورقهایی با ضخامت پایین استفاده میکنند که جهت شکلدهی آنها نیاز به روشهای جدیدی میباشد. شکلدهی الکترومغناطیس یک روش شکلدهی میباشد که بوسیله آن میتوا چکیده کاملبا پیشرفت علم دانشمندان روشهای جدید را جایگزین روشهای قدیمی میکنند. امروزه خودرو سازان جهت کاهش وزن خودروها از ورقهایی با ضخامت پایین استفاده میکنند که جهت شکلدهی آنها نیاز به روشهای جدیدی میباشد. شکلدهی الکترومغناطیس یک روش شکلدهی میباشد که بوسیله آن میتوان قطعات بسیار نازک را شکلدهی نمود. در شکل دهی الکترومغناطیس با تخلیه انرژی الکتریکی در سیمپیچهای آن میدان مغناطیسی به وجود میآید که همانند سنبه ولی بدون اثر گذاری قطعه-کار را به سمت قالب هدایت میکند و باعث شکلدهی آن میشود. این عمل در مدت زمان کمتر از یک میکروثانیه انجام میشود و باعث میشود تعداد قطعات تولید شده از این روش افزایش یابند. با توجه به اینکه سیمپیچها رابط بین دستگاه و قطعهکار میباشند، در این پژوهش به بررسی عددی و تجربی تعداد دور سیمپیچ و ولتاژ در شکلدهی الکترومغناطیس پرداخته میشود. جهت انجام آزمایشهای عملی سیمپیچهای الکترومغناطیس ساخته شده و با استفاده از دستگاه الکترومغناطیس با قدرت 3 کیلوژول آزمایشها انجام میشوند. جهت انجام آزمایشهای عددی نیز از نرمافزار آباکوس و جیمگ استفاده شده است که نتایج عددی با نتایج تجربی مطابقت خوبی داشته است. پس از انجام آزمایشها، مشاهده شد که سیمپیچها باید هم مساحت با قطعهکار در نظر گرفته شوند و جهت شکلدهی مساحتهای بزرگی از ورق باید شکلدهی در چند مرحله با سیمپیچهای کوچک انجام شود. همچنین جهت افزایش استحکام سیمپیچها در زمان شکلدهی باید سیمپیچها در محلولهای اف کا 20 قرار گیرند. پرونده مقاله -
دسترسی آزاد مقاله
224 - مروری بر پارامترهای تاثیرگذار در شکل دهی نموی از 1960 تا 2019
مجتبی حسنلو سینا مکاریشکل دهی ورقهای فلزی به عنوان یکی از مهم ترین شاخههای شکل دهی فلزات، از جایگاه ویژهای در زمینههای مختلف صنعتی برخوردار میباشد. در این فرآیندها با استفاده از مجموعهای از قالب های یکپارچه صلب، تغییر شکل پلاستیک مطلوب در یک ماده خام اولیه ایجاد میشود. این قبیل قالب ه چکیده کاملشکل دهی ورقهای فلزی به عنوان یکی از مهم ترین شاخههای شکل دهی فلزات، از جایگاه ویژهای در زمینههای مختلف صنعتی برخوردار میباشد. در این فرآیندها با استفاده از مجموعهای از قالب های یکپارچه صلب، تغییر شکل پلاستیک مطلوب در یک ماده خام اولیه ایجاد میشود. این قبیل قالب ها عموماً برای یک قطعه با مشخصات هندسی خاص طراحی و ساخته میشوند، بهطوریکه برای تولید قطعات با شکلهای هندسی مختلف نیاز به استفاده از قالب های متفاوتی وجود خواهد داشت. طراحی و ساخت قالب های جدید مستلزم صرف زمان و هزینه بالایی میباشد. در نتیجه، استفاده از روشهای فوق برای تولید قطعات تکی و قطعات دستهای با تیراژ پایین غیراقتصادی خواهد بود. به منظورکاهش زمان انتظار و هزینههای طراحی و ساخت، توسعه روشهای شکلدهی انعطاف-پذیر میتواند به عنوان یک راهکار مناسب در جهت رفع محدودیتهای فوق مطرح شود. پرونده مقاله -
دسترسی آزاد مقاله
225 - بهینهسازی ضرایب منطقهای فرمول تجربی فولر با برنامه ریزی خطی و الگوریتم ژنتیک در حوزههای فاقد آمار به کمک دادههای مکانی
ابراهیم یوسفی مبرهن ابراهیم کریمی سنگچینی بهروز ارسطو سید علی اصغر هاشمیبرای محاسبه دبی اوج سیلاب در حوضههای فاقد آمار یکی از روشهای مورد استفاده، روشهای تجربی است. از روش-های تجربی که در این تحقیق استفاده شده است، روش فولر بوده که محاسن آن نسبت به سایر روشهای تجربی ارائه دورههای مختلف سیلاب میباشد. در این تحقیق، مقایسه تکنیکهای بهی چکیده کاملبرای محاسبه دبی اوج سیلاب در حوضههای فاقد آمار یکی از روشهای مورد استفاده، روشهای تجربی است. از روش-های تجربی که در این تحقیق استفاده شده است، روش فولر بوده که محاسن آن نسبت به سایر روشهای تجربی ارائه دورههای مختلف سیلاب میباشد. در این تحقیق، مقایسه تکنیکهای بهینهسازی برنامهریزی خطی و الگوریتم ژنتیک در بهینهسازی ضرایب فرمول تجربی فولر بترتیب در محیط برنامهنویسی اکسل و متلب برای حوضههای منتخب منطقه هدف قرار داده شده است. بدین منظور آمار دبی حداکثر 24 ساعته 9 ایستگاه موجود در استان آذربایجان غربی با طول دوره آماری 21 سال مورد بررسی قرار گرفت. مقایسه نتایج برتری روش الگوریتم ژنتیک و سپس برنامهریزی خطی را نشان داد. همچنین نتایج نشان میدهد که استفاده از روشهای جستجوی هوشمند عملکرد روشهای مرسوم را به میزان قابل توجهی بهبود میبخشد. پرونده مقاله -
دسترسی آزاد مقاله
226 - شواهد آئینی از برچسبها و صورتهای مفهومی عرفی تا مفهومسازیها و معناکاویهای با عیار و معیار
حکمت الله ملاصالحیمردم کوچه و بازار در بیان احساسات خود بهنگام تماس با واقعیت هاییکه به لحاظ ذوقی وزیباشناختی مورد پسند وموجب التذاذ ونشاط آنها میشود؛ ازصورت های زبانی و اصطلاحات و عباراتی استفاده می کنند که نه تعریف مشخصی از آنها دارند و نه شناخت نظری مدون و منسجم و مقبول اهل نظر درب چکیده کاملمردم کوچه و بازار در بیان احساسات خود بهنگام تماس با واقعیت هاییکه به لحاظ ذوقی وزیباشناختی مورد پسند وموجب التذاذ ونشاط آنها میشود؛ ازصورت های زبانی و اصطلاحات و عباراتی استفاده می کنند که نه تعریف مشخصی از آنها دارند و نه شناخت نظری مدون و منسجم و مقبول اهل نظر درباره مدعیات خود. صفت ها و صورت های زبانی و گزاره هایی به مانند این لباس شیک و زیباست و آن آهنگ خوش و لذت بخش و این پارچه لطیف است و آن جام ظریف و یا این بنا پرشکوه و باعظمت و جلالت است و هیبت زا و آن سخن رسا و غرا و شیوا و ده ها و ده ها صورت های زبانی و اصطلاحات و عبارات دیگر از خانواده و خویشاوند همین تجربه های ذوقی و زیباشناختی که درمیان عامه رایج است وکاربرد فراوان روزمره نیز دارد؛ وقتی آنها را از زبان اهل نظر و متخصصان رشته های هنر و تاریخ هنر وفلسفه و زیباشناختی می شنویم؛ احساس می کنیم وارد سطح و سپهر دیگری از واقعیت وفهم صورت های زبانی ومفاهیم و اصطلاحات وگزاره هایی شده ایم که ازجنس فهم و وهم عرفی و عامیانه و متعارف نبوده و از ساختار نظری و منطقی منسجم و مدون ومنطقی تعریف شده و مشخصی برخودارند که برای عامه شناخته شده نیست.درسپهردین وتجربه های دینی واعمال وافعال آیینی مردمان نیز با سیلابی از برچسب ها و صورت ها و ترکیبات زبانی مواجه می شویم که گروه های اجتماعی با آنها زندگی می کنند بی آنکه وصف وتعریف مشخص ومنسجم وصورتبندی شده به مفهوم علمی آن درباره آنها داشته باشند.کفه بار احساسی و عاطفی انضمامی وعملی این برچسب ها وصورتهای زبانی درنگاه و وهم و فهم و فکر عامه علی القاعده و علی الاغلب بر کفه بار عقلانی و انتزاعی و نظری و علمی متفکران وعالمان و پژوهشگران و متخصصان سنگین تر است. از این منظر باستان شناسی آیین ها وسنت های دینی ونظام های اعتقادی مفقود گذشته تا رسیدن به برچسب ها وصورت ها وصورتبندی های زبانی درست ودقیق تعریف شده ورهایی از سیلاب الفاظ واصطلاعات وترکیبات خام وعرفی و عامیانه همچنان راه پرپیچ وطولانی پیش رو دارد که می باید طی شود.دستگاه گوارش دانش باستان شناسی بطورکلی وباستان شناسی آیینها و سنت های دینی مفقود گذشته بطور اخص ازصورت های زبانی و مفهومی هضم وجذب ناشده ریزودرشت بسیار به مانند آیین و دین و ایمان و عقیده و الوهیت و امر مقدس و مینوی و ماورایی و متعال و مطلق و سرمدی و یا مفاهیمی از جنس جهان دیگر و رازورزانه و و رازآمیز و روح ونفس و جان و سحر و سحرآمیز وموارد مشابه دیگرهمچنان سنگین ودستخوش اختلال است. استفاده های عرفی وعامیانه وآزاد و بیعیار ومعیار از صورت های زبانی ومفاهیم کلیدی و سؤال خیز از این جنس، همواره مانع بزرگی بر سر راه مطالعات باقاعده و ضابطه باستان شناسی بویژه باستان شناسی آیین ها ونظام های اعتقادی مفقود گذشته بوده است. پرونده مقاله -
دسترسی آزاد مقاله
227 - دوره مسسنگی جدید در تپه سگزآباد
محمد حسین عزیزی خرانقی کمالالدین نیکنامیسگزآباد یکی از شاخصترین تپههای پیش از تاریخی دشت قزوین است که بر اساس کاوشهای طولانی مدت دانشگاه تهران، آنرا یکی از بهترین نمونههای محوطههای اعصار آهن و مفرغ جدید میشناسند. به تازگی آثاری از اواخر هزاره چهارم ق.م که در فلات مرکزی ایران با نام دوره مسسنگی جدید (س چکیده کاملسگزآباد یکی از شاخصترین تپههای پیش از تاریخی دشت قزوین است که بر اساس کاوشهای طولانی مدت دانشگاه تهران، آنرا یکی از بهترین نمونههای محوطههای اعصار آهن و مفرغ جدید میشناسند. به تازگی آثاری از اواخر هزاره چهارم ق.م که در فلات مرکزی ایران با نام دوره مسسنگی جدید (سیلک III6-7) شناخته میشود، در این محوطه شناسایی شده است.کاوشهای آموزشی- پژوهشی گروه باستانشناسی دانشگاه تهران، پاییز ۱۳۸۸ در تپه سگزآباد با هدف مطالعه دقیقتر و وسیعتر لایههای مسسنگی جدیدی که برای اولین بار در کاوشهای سال ۱۳۷۸ شناسایی شده بود، صورت پذیرفت. در این فصل سه ترانشه ۶، ۷ و ۸ مورد کاوش قرار گرفت. پس از اتمام کاوشها، تنها در ترانشه ۶ آثار دوره مسسنگی جدید یافت شد. متأسفانه به دلیل حفاری های غیرمجاز گسترده صورت گرفته در این محوطه، تیم کاوش موفق به شناسایی معماری کاملی از این دوره نگردید، ولی سفالهای شاخص و ظریف این دوره به تعداد قابل توجه بدست آمد. این نوشتار فقط بر گونهشناسی، طبقهبندی و معرفی انواع مختلف سفالهای دوره مسسنگیجدید تمرکز خواهد داشت. پرونده مقاله -
دسترسی آزاد مقاله
228 - اثر سوندگذاری بر شیوع عفونت های ادراری
فاطمه محمدزاده حامد زارعی سحر هنرمند جهرمیعفونت مجاری ادراری از مهمترین عفونت های بیمارستانی است که غالبا ناشی از سوندگذاری است. باکتریهای یوروپاتوژن با تشکیل بیوفیلم در سوند ها می توانند عامل بالقوه عفونت مجاری ادراری باشند. هدف از مطالعه حاضر بررسی تشکیل بیوفیلم کلبسیلا پنومونیه جدا شده از عفونت مجاری ادراری چکیده کاملعفونت مجاری ادراری از مهمترین عفونت های بیمارستانی است که غالبا ناشی از سوندگذاری است. باکتریهای یوروپاتوژن با تشکیل بیوفیلم در سوند ها می توانند عامل بالقوه عفونت مجاری ادراری باشند. هدف از مطالعه حاضر بررسی تشکیل بیوفیلم کلبسیلا پنومونیه جدا شده از عفونت مجاری ادراری مرتبط با سوند است. مطالعه بر روی 110 نمونه ادرار بیمارانی که به آزمایشگاه بالینی بیمارستان میلاد ، تهران مراجعه کرده بودند ، انجام شد. بیماران به دو گروه مبتلا به عفونت ادراری مرتبط با سوند و غیر مرتبط با سوند تقسیم شدند. جداسازی و شناسایی کلبسیلا پنومونیه با انجام تست های بیوشیمیایی و تشکیل بیوفیلم با روش میکروتیتر پلیت بررسی شد. 70 و 40 نمونه به ترتیب مربوط به عفونتهای مرتبط با سوند و غیر مرتبط با سوند بودند. 60درصد جدایه های کلبسیلا پنومونیه مرتبط با عفونت ادراری ناشی از سوند گذاری بیوفیلم قوی ، 7/26درصد بیوفیلم متوسط و3/13 درصد بیوفیلم ضعیف تشکیل دادند. 3/33 درصد جدایه های کلبسیلا پنومونیه مرتبط با عفونت ادراری بدون سوند بیوفیلم قوی،6/36 درصد بیوفیلم متوسط و3/23 درصد بیوفیلم ضعیف تشکیل داده و 2 جدایه هیچ بیوفیلمی تشکیل ندادند. استفاده از سوند در بیماران بستری در بیمارستان ها خطر ابتلا به عفونت مجاری ادراری را افزایش می دهد که به دلایل مختلفی مانند طول مدت سوند گذاری، نوع سوند و توانایی تشکیل بیوفیلم باکتری های یوروپاتوژن بستگی دارد. قدرت تشکیل بیوفیلم باکتری ها در طول سوند خطر شدت عفونت را افزایش داده و منجر به بروز مقاومت آنتی بیوتیکی جدایه ها و عدم درمان مناسب بیماران می شود. پرونده مقاله -
دسترسی آزاد مقاله
229 - The Impact of the Tourism Sector Policies in the Ninth and Tenth Boards of Government on Urban form and Structure of Mashhad Using Discourse Theory
Sara Jalali Zohreh Davoudpour Manouchehr TabibianAs the pilgrims and tourists have been always present in Mashhad, meeting their needs has been constantly prioritized in urban planning especially the renewal and reconstruction projects carried out in the holy shrine surroundings. However, recent years have seen a chan چکیده کاملAs the pilgrims and tourists have been always present in Mashhad, meeting their needs has been constantly prioritized in urban planning especially the renewal and reconstruction projects carried out in the holy shrine surroundings. However, recent years have seen a change of perspective toward pilgrims. These changes have been induced by both global and national politics. That is why great changes can be observed in the urban form and structure which are faster than ever before. The present research aims to analyze the discourse of the ninth and tenth boards of government to explore the effect of policies made in the tourism sector and see how tourist attraction has been perceived in urbanistic discussions. It eventually aims to explore the trend of changes made to the form of Mashhad city influenced by those policies the research adopted Laclauand Mouffe'sdiscoursetheory and conducted a content analysis of higher-order documents and the interviews made by the main decision-makers published about religious tourism in Mashhad. It delve in to the discourse of the ninth and tenth boards of government and how it affected the national tourism sector. It further delved into the effect of this perspective on the revolutions made to the urban form of Mashhad during the target era. The present findings show that there have been traces of changes in how pilgrims and tourists are perceived in Mashhad and how they induced changes to the urban form and structure of the city as well as the urbanism decision making. پرونده مقاله -
دسترسی آزاد مقاله
230 - Elements and Indicators of Urban Form: A Meta-Synthesis Study
zeinab kheirkhah Marjan A. Nemati MehrVarious approaches have been adopted to urban form and many elements and indicators have been proposed on spatial scales. However, a comprehensive scale-based study of urban form is lacking. This study seeks to identify the elements and indicators of urban form on diffe چکیده کاملVarious approaches have been adopted to urban form and many elements and indicators have been proposed on spatial scales. However, a comprehensive scale-based study of urban form is lacking. This study seeks to identify the elements and indicators of urban form on different spatial scales. The current study is a meta-synthesis based on a systematic review. A search for the keywords in information databases resulted in 12104 studies, which were reduced to 18 after being screened by means of elimination criteria and quality evaluation. Qualitative content analysis was used for the analysis of the results. Thus, 89 codes (indicators) were extracted and classified into 14 concepts (sub-elements) and 5 categories (main-elements) in terms of 3 scales of city and metropolitan area, neighborhoods and urban blocks. Using Shannon entropy method, the significant coefficient of the indicators was determined and the elements of urban form were ranked. Based on findings, the most important sub-elements on the macro-scale are land use mix, density distribution and type of density. In addition, land use mix, street network and type of density have the highest rank on the meso-scale and street design is placed at the first grade on the micro-scale. According to the rank of sub-elements, land use and density are the most important elements of urban form. پرونده مقاله -
دسترسی آزاد مقاله
231 - Spatial Evaluation of Energy Performance at Neighborhood Scale Case study: Sanandaj city
Farnaz Ghazi Farzin Charehjoo Mahta MirmoghtadaeeClimate change has become a challenge with adverse impacts on the Earth. Reducing the use of fossil fuel is a primary step to solve environmental problems. As the population continues to rise, to meet the growing demand for construction with a large share in energy Cons چکیده کاملClimate change has become a challenge with adverse impacts on the Earth. Reducing the use of fossil fuel is a primary step to solve environmental problems. As the population continues to rise, to meet the growing demand for construction with a large share in energy Consumption, Efforts to make the built environment more energy efficient is crucial. The main objective of this research is to evaluates the relationship between urban form and the energy performance of neighborhoods, focusing on their energy demand, through case studies of Ghatarchyan and Mobarakabad neighborhoods in Sanandaj city. The forms of these neighborhoods were measured using spatial metrics (physical and climatic criteria). For analysis and evaluation, ECOTECT, GIS software and ANP method have been used. The results of research indicate a negative correlation between spatial metrics and building energy performance. Therefore, if spatial metrics amount of each neighborhood increases, neighborhood energy demand will decrease. Moreover, the result can form a basis for urban design recommendations to achieve an energy efficient urban development through spatial design. پرونده مقاله -
دسترسی آزاد مقاله
232 - The Role of Algorithmic Applications in the Development of Architectural Forms (Case Study:Nine High-Rise Buildings)
Ahmadreza Khalili Hossein Soltanzadeh Seyed Hadi GhoddusifarThe process of developing architectural forms has greatly been changed by advances in digital technology, especially in design tools and applications. In recent years, the advent of graphical scripting languages in the design process has profoundly affected 3D modeling. چکیده کاملThe process of developing architectural forms has greatly been changed by advances in digital technology, especially in design tools and applications. In recent years, the advent of graphical scripting languages in the design process has profoundly affected 3D modeling. Scripting languages help develop algorithms and geometrical grammar of shapes based on their constituent parameters. This study aimed to discover new concepts through the use of computer tools, especially algorithmic tools, in the form design process. The statistical population included high-rise buildings constructed worldwide in the past two decades. The main research questions include: 1) What are the main features and properties of algorithmic applications in comparison with conventional drawing applications? 2) How do algorithmic applications affect the process of devising an architectural form? In this case study, the quantitative research method was employed along with computer simulation. In addition, desk studies and the Internet references were reviewed to collect data. According to the research results, the use of graphical scripting languages as form design tools can develop a smart and generative geometrical framework. Such a smart geometrical framework can relate geometrical grammar to the mathematical relations of shapes. As a result, the changed geometrical parameters of a shape can be reflected on the other variables of dependent forms to change the primary features and specifications of the form. Moreover, changing the existing parameters can result in morphogenic forms, the development of which complies with specific principles. پرونده مقاله -
دسترسی آزاد مقاله
233 - Analyzing the Impact of the Physical Form of Neighborhoods on Walkability
Maryam Mohamadi Mahsa MostafaeiPhysical health influences the wide area such as: urban design, physical activities, walking behavior) and generally needs accurate laboratory methods and tools to assess. A large number of studies considered walking behavior as one of the aspects of physic چکیده کاملPhysical health influences the wide area such as: urban design, physical activities, walking behavior) and generally needs accurate laboratory methods and tools to assess. A large number of studies considered walking behavior as one of the aspects of physical health.The present study aimed to evaluate the impact of the physical form in neighborhoods on the walkability to explain the effect of the urban element on physical activity. Haft Hoz (with grid pattern) and Bagh-e-Feyz (with organic pattern) were selected due to the different spatial configurations. The social and economic conditions were identical to avoid the impact of intervening variables. The spatial configuration and order were investigated by using the space syntax technique and Depth Map Software . The typology and field survey methods were used to evaluate the characteristics of the blocks and parcels and land use, respectively. In addition to examining the physical forms in the neighborhoods objectively, the subjective technique was used by interviewing the residents and getting to the theoretical saturation. Based on the results, spatial configuration, blocking pattern and parcel, and land use affect the walkability. پرونده مقاله -
دسترسی آزاد مقاله
234 - Geometric Analysis of the Historical Periods of Architecture in the Mausoleum of Shah Nematollah Valli in Mahan
Maryam Mehrizi Abbas Masoudi Faramarz Hassan pourThis paper analyses the mausoleum of Shah Nematollah Valli in Mahan. Its construction started in the Timurid era and gradually transformed into its current form. This complex has been built during three periods (Timurid, Safavid, Qajar) and in a variety of Iranian archi چکیده کاملThis paper analyses the mausoleum of Shah Nematollah Valli in Mahan. Its construction started in the Timurid era and gradually transformed into its current form. This complex has been built during three periods (Timurid, Safavid, Qajar) and in a variety of Iranian architectural styles. This article tries to recognize the architecture of different periods from the point of view of proportions and geometric order. The method used in the present study is analytical-descriptive in accordance with the research hypothesis. To achieve the theoretical foundations of the research, which includes information about geometry and proportions as well as similar examples, data is gathered from previous resesrch and field works then data is analyzed through the descriptive and analytical methods of building geometry. Different spaces of this complex are evaluated in terms of compatibility with golden ratios and geometric patterns using software such as phi Matrix 1.16 pro and Phi Matrix Golden Ratio. According to the obtained outputs, the initial geometry of the building in the Timurid era, in comparison with its later geometry in the Safavid and Qajar periods, has undergone ruptures and changes in pattern (paradigm shifts), although there are similarities. The results of this study show that the initial geometry of the building follows a precise geometrical regularity in terms of form in the dome part, has the form of a Chalipa enclosed in a regular octagon in the plan, and has golden rectangular proportions in the facade and section. Furthermore, the geometry of the added parts in later periods is based on square shapes and a quadruple system. پرونده مقاله -
دسترسی آزاد مقاله
235 - Evaluating the Efficiency of Different Cover Forms of the Large Spans in Flowers and Plant Exhibitions Based on the Natural Ventilation Vystem in a Moderate and Humid Climate
Alireza Soltanzadeh Katayoun Taghizadeh Jamshid EmamiDeciding the roof type with a large ventilation spans for uses in the flower and plant exhibitions that can operate beyond the exhibition space functions as it can provide a desirable climate for the growth of its plants, it can be designed and enhanced according to the چکیده کاملDeciding the roof type with a large ventilation spans for uses in the flower and plant exhibitions that can operate beyond the exhibition space functions as it can provide a desirable climate for the growth of its plants, it can be designed and enhanced according to the geographical site of it. Deciding and designing the roof form can prevent dissipations in energy and assets and develops a construction with high efficiency together with low costs of maintenance, only if it is done in an intelligent way. The independent variables in this research are the climate conditions, and form of the structure is considered as the intervening variables together with factors like the internal air current and sub climates and the levels of thermal comfort for individual occupants as the dependent variables. The aim of conducting this master thesis which is considered as an interdisciplinary research, is to reach for proper patterns in covering the ventilators in greenhouses with large spans by using the climate information of the north-Iran region. The main question of this research is the most efficient roof form in regard to natural ventilation in mild and humid climate condition? Research method the study is modeling and computer simulation in a way that they are evaluated with the prevalent forms of exhibitions and greenhouses with large vents in the terms of the external wind flow impacts and natural ventilation in their interior and analyzed by employing Computational Fluid Dynamics (CFD) and moving particle semi-implicit (MPS) simulation. Results indicate that form of a building has an obvious impact on the internal airflow and the curved forms have a better impact on the internal circulation of air. As an instance, in the convex geometries, the airflow speed rate drops in the center of the construction while in the concave geometries it is quite the opposite as the speed is reduced around the sidewalls of the construction and the thermal comfort becomes a different point along with natural ventilation. پرونده مقاله -
دسترسی آزاد مقاله
236 - The Morphology of Qom; The Study on Spatial Configuration Changes of The City (1956-2021)
Seyed Abdolhadi Daneshpour Mostafa Abbaszadegan Masoud ElahiThe present study attempts to investigate the relationship between spatial configuration changes of Qom and the central core in the last half century. The main objective of this study is to review the Spatial form of Qom, and analyze the effect of changes in Urban confi چکیده کاملThe present study attempts to investigate the relationship between spatial configuration changes of Qom and the central core in the last half century. The main objective of this study is to review the Spatial form of Qom, and analyze the effect of changes in Urban configuration on the central core of the city and the main axes of urban activities during 1946 to 2011 and ultimately, Forecast the future status of the city based on the extensive changes being conducted on the configuration of this religious metropolis in the time horizon of 2021. The findings of this study on the alignment of decisions made with regard to the Qom structure and the Holy Shrine of Fatima Masumeh (AS) as the Central core of the city in the last half century have identified two time periods. The first, Decisions adopted on developmental changes during 1946 to 2011, which weakened the Qom spatial Configuration Values. Second, Future developmental changes during 2011 to 2021 that are expected to lead to improvements in Spatial Configuration Values. Based on Qom morphological analysis in the last half century, this study concludes if the Qom roadmap foreseen for the time horizon of 2021, including construction of ceremonial axis of Prophet (PBUH) boulevard, inner ring roads and completion of urban ring roads happens, then the improvement of global integration, synergy, intelligibility and Choice values in the Central core and other parts of the city are expected. پرونده مقاله -
دسترسی آزاد مقاله
237 - A Risk-averse Inventory-based Supply Chain Protection Problem with Adapted Stochastic Measures under Intentional Facility Disruptions: Decomposition and Hybrid Algorithms
Sajjad Jalali Mehdi Seifbarghy Seyed Taghi Akhavan NiakiOwing to rising intentional events, supply chain disruptions have been considered by setting up a game between two players, namely, a designer and an interdictor contesting on minimizing and maximizing total cost, respectively. The previous studies have found the equili چکیده کاملOwing to rising intentional events, supply chain disruptions have been considered by setting up a game between two players, namely, a designer and an interdictor contesting on minimizing and maximizing total cost, respectively. The previous studies have found the equilibrium solution by taking transportation, penalty and restoration cost into account. To contribute further, we examine how incorporation of inventory cost influences the players’ strategies. Assuming risk-averse feature of the designer and fully optimizing property of the interdictor with limited budget, the conditional-value-at-risk is employed to be involved in total cost. Using special order sets of type two and duality role, the linearized tri-level problem is solved by column-and-constraint generation and benders decomposition algorithms in terms of small-sized instances. In terms of larger-sized instances, we also contribute to prior studies by hybridizing corresponding algorithms with bio-geography based optimization method. Another non-trivial extension of our work is to define adapted stochastic measures based on the proposed mean-risk tri-level formulation. Borrowing instances from prior papers, the computational results indicate the managerial insights on players’ decisions, the model’s efficiency and performance of the algorithms. پرونده مقاله -
دسترسی آزاد مقاله
238 - Designing Stochastic Cell Formation Problem Using Queuing Theory
Parviz fattahi Bahman Esmailnezhad Amir Saman KheirkhahThis paper presents a new nonlinear mathematical model to solve a cell formation problem which assumes that processing time and inter-arrival time of parts are random variables. In this research, cells are defined as a queue system which will be optimized via queuing th چکیده کاملThis paper presents a new nonlinear mathematical model to solve a cell formation problem which assumes that processing time and inter-arrival time of parts are random variables. In this research, cells are defined as a queue system which will be optimized via queuing theory. In this queue system, each machine isassumed as a server and each part asa customer. The grouping of machines and parts are optimized based on the mean waiting time. For solving exactly, the proposed model is linearized. Since the cell formation problem is NP-Hard, two algorithms based on genetic and modified particle swarm optimization (MPSO) algorithms are developed to solve the problem. For generating of initial solutions in these algorithms, a new heuristic method is developed, which always creates feasible solutions. Also, full factorial and Taguchi methods are used to set the crucial parameters in the solutions procedures. Numerical experiments are used to evaluate the performance of the proposed algorithms. The results of the study show that the proposed algorithms are capable of generating better quality solutions in much less time. Finally, a statistical method is used which confirmed that the MPSO algorithm generates higher quality solutions in comparison with the genetic algorithm (GA). پرونده مقاله -
دسترسی آزاد مقاله
239 - Assessment of the Effects of Geological Formation on the Water Resources Quality in Arid and Semiarid Watersheds
Naser Shamskia H. R. PayrovanOne of the most important subjects in relation of water resources quality in the many of river is the chemical composition of waters and conservation of water quality in the watershed. Geological formations in any region of the earth are the main surface and foundation چکیده کاملOne of the most important subjects in relation of water resources quality in the many of river is the chemical composition of waters and conservation of water quality in the watershed. Geological formations in any region of the earth are the main surface and foundation that water flows on the bed and strata of formation, which in fact they affect their characteristics on water quality as positive or negative effects. The effect of various geological formations analyzed from Pre-Cambrian to recent Era in some of region in Iran. To show their effects on water quality on a few of water rivers, and therefore to classified these formations, they divide into two separate groups; desirable and undesirable formations. It is necessary to classify them depend on their resistance against weathering and erosion. Influence of these two agents on geological formations will produce the material which effects on water quality that considered in this paper, it have been assessed and explained. There are many cases of river in different regions in Iran such as lower stream Karoon, Qezel-uzan, Qom-Rud River, and etc..., in which they passed and flow in the Neogene formations, and they have changed the water quality of rivers. It is notable that this study can be useful in river engineering, dam construction, flood spreading, rain water harvesting and transmission of water for drinking or agriculture targets. پرونده مقاله -
دسترسی آزاد مقاله
240 - تحلیل رفتار فرم حیاط مرکزی در تهویه طبیعی خانههای سنتی اقلیم گرم و خشک ساحلی بهروش CFD (مطالعه موردی: عمارت دهدشتی در شهر بوشهر)
ملیحه تقی پور ندا قهرمانایزدی حمید اسکندری خسرو موحدبوشهر با رطوبت نسبی بالا نیاز به تهویه دارد، حیاطمرکزی از اجزای موثر در تهویه طبیعی است. هدف این پژوهش کشف زوایای پنهان عملکردی تهویهی طبیعی حیاطمرکزی، از منظر شکل هندسی حیاط، تناسبات و میزان توده بهینه در خانههای منطقهی گرم و خشک ساحلی بوشهر است. در این مقاله به چکیده کاملبوشهر با رطوبت نسبی بالا نیاز به تهویه دارد، حیاطمرکزی از اجزای موثر در تهویه طبیعی است. هدف این پژوهش کشف زوایای پنهان عملکردی تهویهی طبیعی حیاطمرکزی، از منظر شکل هندسی حیاط، تناسبات و میزان توده بهینه در خانههای منطقهی گرم و خشک ساحلی بوشهر است. در این مقاله بهروش تحقیق ترکیبی و با استفاده از راهبردی تجربی، ابتدا متغیرهای مستقل تاثیرگذار شناسایی، متغیرهای وابسته توسط دستگاههای دقیق دیجیتال در یک نمونه موردی (عمارت دهدشتی) اندازهگیری و دادههای آن برای اعتبارسنجی نرمافزار، استفاده شد. پس از گونهشناسی حیاط، به روشCFD و با استفاده از نرمافزارAutodesk CFD 2018 ، شبیهسازی برای ۹ گونهی مختلف ترکیب اتاق و حیاط به شکلهای مستطیل عمودی، مربع و مستطیل افقی، در ۳ تراز ارتفاعی طبقهی همکف، اول و دوم اجرا و براساس دو مولفهی سرعت جریان هوا، عمرمتوسط هوا انجام شد. فرم حیاط، فرم اتاق و نسبت توده به فضا، بهعنوان متغیرهای مستقل و کیفیت جریان هوای داخل اتاق (سرعت و عمر هوا) به عنوان متغیر وابسته درنظر گرفته شد. یافتهها نشان میدهد، فرم هندسی اتاق و حیاط بر میزان تهویه طبیعی تاثیرگذار است و فرمهای کشیده عمودی سرعت باد بیشتری را نشان میدهند. افزایش نسبت عرض به طول مستطیل از 1 به 15/1 و 1 به 3 در حالت مستطیل عمودی ابتدا سرعت جریان هوا در فضای اتاق افزایش و سپس کاهش میدهد، ولیکن در مستطیل افقی سرعت تقریبا از روند یکنواختتری پیروی میکند. نتایج بیانگر آن است که گونههای حیاط و اتاق مستطیل عمودی به ویژه گونه شماره ۲، به دلیل کشیدگی فرم، از نظر هر دو مولفهی سرعت جریان هوا، عمر هوا نتایج بهتری را نشان دادهاند. از بعد تناسبات بهینه حیاط، نسبت 1 به 3/1 هم فراوانی مطلوبی در نمونههای واقعی و هم مقدار کشیدگی لازم برای برجستهکردن تفاوت مولفههای کیفیت هوا را دارد. همچنین تغییرات ضخامت توده بر سرعت و کیفیت هوا تاثیر قابلتوجهی دارد. پرونده مقاله -
دسترسی آزاد مقاله
241 - Effect of flower pattern on the curvature of high-strength steel pipe in roll forming
M. Karimi Firouzjaei H. Moslemi Naeini B. Abbaszadeh M.M. KasaeiThe geometrical characteristic of products is one of the crucial quality indicators in the cold roll forming process. In this process, an appropriate flower pattern for rolls is vital to achieve the desired geometry and quality for high-strength steel pipes. In this pap چکیده کاملThe geometrical characteristic of products is one of the crucial quality indicators in the cold roll forming process. In this process, an appropriate flower pattern for rolls is vital to achieve the desired geometry and quality for high-strength steel pipes. In this paper, four different flower patterns, including circular, edge bending, double radius, and reverse bending are designed for the roll forming process of the high-strength steel pipe. Then, the effect of the flower pattern on the curvature distribution of the deformed strip is investigated using finite element analysis. The accuracy of the finite element model is evaluated by performing experimental tests. The results show that forming the strip with the reverse bending flower pattern leads to a more uniform curvature distribution in its cross-section, especially in the edge portion. Thus, this flower pattern design method is recommended for the roll forming process of the high-strength steel pipes. پرونده مقاله -
دسترسی آزاد مقاله
242 - شناسایی فلـور و شکل زیستی گیـاهان منطقه ی کنـدوان در استان آذربایجان شرقی
ژیلا توپچیمراتع کندوان در دامنه ی شمالی رشته کوه های سهند قرار دارد. منطقه ی مورد مطالعه در محدوده ی طول های جغرافیایی 7/45 ´10 ˚46 تا "7/53´20 ˚46 شرقی و عرض جغرافیایی "3/12´42 ˚37 تا"8/13 ´52 ˚37 شمالی قرار دارد. حداقل ارتفاع بررسی شده در این منطقه چکیده کاملمراتع کندوان در دامنه ی شمالی رشته کوه های سهند قرار دارد. منطقه ی مورد مطالعه در محدوده ی طول های جغرافیایی 7/45 ´10 ˚46 تا "7/53´20 ˚46 شرقی و عرض جغرافیایی "3/12´42 ˚37 تا"8/13 ´52 ˚37 شمالی قرار دارد. حداقل ارتفاع بررسی شده در این منطقه 1800 و حداکثر 3000 متر می باشد. در منطقه ی مورد بررسی، تعداد 400 نمونه ی گیاهی جمع آوری و خشک شده و سپس به هرباریوم منتقل و با استفاده از کلیدهای معتبر خارجی و داخلی شناسایی و تعیین نام علمی شدند. 256 گونه متعلق به 153 جنس و 37 تیره شناسایی شد. از مهم ترین تیره های گیاهی جمع آوری شده از این منطقه می توان به تیره هایAsteraceae ، Fabaceae، Lamiaceae، Brassicaceae و Apiaceae اشاره نمود. تیره ی کاسنی با 40 گونه، بقولات با 29 گونه، نعناعیان با 25 گونه، تیره ی شب بو با 22 گونه و تیره ی چتریان با 16 گونه، به ترتیب بیشترین گونه ها را به خود اختصاص دادند. شکل زیستی هریک از عناصر گیاهی منطقه، با استفاده از روش رونکیه مشخص شد. اشکال بیولوژیک منطقه شامل 1.17% فانروفیت، 4.68% ژئوفیت، 6.25% کامفیت، 30.07% تروفیت و 57.81% همی کریپتوفیت می باشند. پرونده مقاله -
دسترسی آزاد مقاله
243 - بررسی نظام انتخاباتی فرانسه (انتخابات ریاست جمهوری و پارلمان)
علیرضا صلواتی حجت الله درویشپور احمد بخشایش اردستانی مسعود مطلبیانتخابات و رای همگانی دارای جایگاه بسیار ویژهای در ساختار سیاسی فرانسه بوده و فرانسویان همواره نسبت به انتخابات با حساسیت ویژهای نگریستهاند. از این رو، پژوهش حاضر در صدد بررسی سیستم انتخاباتی جمهوری فرانسه است. سوال اصلی این پژوهش برآنست که سیستم انتخاباتی فرانسه بر چکیده کاملانتخابات و رای همگانی دارای جایگاه بسیار ویژهای در ساختار سیاسی فرانسه بوده و فرانسویان همواره نسبت به انتخابات با حساسیت ویژهای نگریستهاند. از این رو، پژوهش حاضر در صدد بررسی سیستم انتخاباتی جمهوری فرانسه است. سوال اصلی این پژوهش برآنست که سیستم انتخاباتی فرانسه بر چه مبنایی شکل گرفته است؟ فرضیه این پژوهش نیز بر آنست که سیستم انتخاباتی فرانسه یک سیستم انتخاباتی دو مرحلهای با اکثریت مطلق در دوره اول و اکثریت نسبی در دوره دوم انتخابات است. به این معنی که هم در انتخابات ریاست جمهوری و هم انتخابات مجلس ملی، نامزدهای انتخاباتی باید حداقل نیمی از آراء مأخوذه را به خود اختصاص داده، در غیر این صورت انتخابات به مرحله دوم کشیده میشود که در انتخابات ریاست جمهوری دو نفر اول و در انتخابات مجلس ملی، نامزدهایی که حداقل 5/12 درصد از آراء ماخوذه را به خود اختصاص داده باشند به مرحله دوم انتخابات راه پیدا میکنند. در مرحله دوم که مبتنی بر اکثریت ساده است، نامزدهایی که بیشترین آراء را کسب کنند، پیروز انتخابات میشوند. پیچیدگی اصلی انتخابات فرانسه در اختصاص کرسیها به احزاب پیروز در انتخابات مجلس ملی است که کرسیها بر اساس فرمول خاصی بین احزاب پیروز تقسیم میشوند و هر چه درصد آراء کسب شده توسط احزاب و ائتلافهای انتخاباتی بیشتر باشد، میزان کرسیهای اختصاص یافته به آنها به طور تصاعدی بالاتر میرود. پرونده مقاله -
دسترسی آزاد مقاله
244 - The Effect of Input-based and Output-based Focus on Form Instruction on Learning Grammar by Iranian EFL Learners
سمیرا بوستان سعدی مهناز سعیدیThis quasi-experimental study investigated the effects of input-enhancement and production of sentences, containing the target structures, on learning grammar by Iranian Intermediate EFL learners. Sixty male students in three input, output, and control groups participat چکیده کاملThis quasi-experimental study investigated the effects of input-enhancement and production of sentences, containing the target structures, on learning grammar by Iranian Intermediate EFL learners. Sixty male students in three input, output, and control groups participated in the study. After checking the homogeneity of the participants with a proficiency test, the researchers administered a pretest. Input-based group received input enhancement within reading texts in which the target structures were highlighted with different techniques such as bolding and underlying. The output-based group were required to produce some sentences including target structures based on reading texts. The control group received traditional grammar instruction. The results of ANCOVA revealed that both experimental groups learned the target structures better than the control group; however, the input-based group outperformed output-based group in learning target grammatical structures. The findings of the study suggest the widespread use of input-enhancement, as one of the techniques of focus on form, plays a significant role in enhancing grammatical accuracy. پرونده مقاله -
دسترسی آزاد مقاله
245 - The Effect of Textual Enhancement Techniques on the Acquisition of Passive Form
ایرج خوشنویس Zohreh MikaeliThis experimental study evaluated the possible effects of textual input- based enhancement on the acquisition of passive form on Iranian pre-intermediate EFL learners. Sixty Iranian EFL learners at the pre-intermediate level of proficiency were randomly assigned into th چکیده کاملThis experimental study evaluated the possible effects of textual input- based enhancement on the acquisition of passive form on Iranian pre-intermediate EFL learners. Sixty Iranian EFL learners at the pre-intermediate level of proficiency were randomly assigned into three groups; two experimental group and one comparison group. The first experimental group received passages in which the passive forms were repetitive, the second experimental group received passages in which the passive forms were underlined in different colors. The third group (comparison group) received explicit instruction of passive form with no passage. Repetition group received two texts in each session. The study followed a pre-test /treatment/ post-test design. The result indicated that both textually enhanced input, repetitive and underlined in different colors, have a statistically significant effect on the acquisition of target items than explicit instruction group. Moreover, it can be concluded that repetition can be more beneficial than underlined method of enhancement. پرونده مقاله -
دسترسی آزاد مقاله
246 - Metalinguistic Awareness and the Accuracy of Postgraduate TEFL Students’ Writing: Teacher’s Focus vs. Learners’ Focus
Zohreh SeifooriThe sway of the pendulum in language pedagogy towards conscious learning processes marks the paramount role of metalinguistic awareness. The purpose of this quasi-experimental study was to compare the impact of teacher-oriented vs. learner-generated metalinguistic aware چکیده کاملThe sway of the pendulum in language pedagogy towards conscious learning processes marks the paramount role of metalinguistic awareness. The purpose of this quasi-experimental study was to compare the impact of teacher-oriented vs. learner-generated metalinguistic awareness activities on Iranian TEFL students’ writing accuracy. Sixty participants in three intact classes were randomly assigned as one control, and two experimental groups. All the participants received the same process-oriented instruction based on identical teaching materials. In the first experimental group, the teacher-focus metalinguistic awareness (TFMA) group, however, a collection of various form-focused activities, compiled by the teacher, was assigned and reviewed in the class weekly. In the learner-focused metalinguistic awareness (LFMA) group, the same assignments were assigned as supplementary self-study activities. The control group did not receive any structural assignments. The treatment perpetuated for six sessions and the analyses of the data obtained from the writing post-test revealed that both TFMA and LFMA groups outperformed the control group by producing more accurate writing and that the TF group surpassed the LF group. The findings lend credence to the significance of language awareness in EFL contexts and offer a number of pedagogical implications. پرونده مقاله -
دسترسی آزاد مقاله
247 - Teaching English Pragmatics in an EFL Context: Effects of Obtrusive and Unobtrusive Focus on Form Instructions
Elaheh Zaferanieh عباس اسلامی راسخWith the aim of more emphasis on pragmatics and its inclusion in EFL classrooms, this study attempted to investigate the effectiveness of obtrusive and unobtrusive focus on form instructions on learners’ pragmatic performance of criticizing in English. 54 Iranian چکیده کاملWith the aim of more emphasis on pragmatics and its inclusion in EFL classrooms, this study attempted to investigate the effectiveness of obtrusive and unobtrusive focus on form instructions on learners’ pragmatic performance of criticizing in English. 54 Iranian learners, all at intermediate level, participated in this study, and they were divided into three groups: 19 participants receiving obtrusive instruction, 21 learners receiving unobtrusive instruction and 14 participants had no pragmatic instruction (control group). Techniques related to each method were operationalized in details and applied in the classrooms. The most basic techniques in obtrusive methods were consciousness raising activities, metalinguistic explanation, and explicit correction. In unobtrusive method, input enhancement activities, and recast were used. Discourse completion test and oral feedback were used as pretests and posttests in this study. After applying statistical analyses using ANOVA, it was found that learners’ pragmatic knowledge of criticizing improved significantly in both kinds of instructions. Also, results of post hoc analyses indicated that learners in obtrusive focus on form instruction outperformed those in unobtrusive focus on form instruction significantly. These results were justified through noticing hypotheses, importance of metalinguistic explanations, effects of explicit correction, and output hypothesis. These findings may have great implications for language teachers, syllabus designers, and future researchers. پرونده مقاله -
دسترسی آزاد مقاله
248 - A Study of the Challenging Sociocultural Variables Affecting EFL Learners’ Identity in an Iranian Context
هاجر مقدسی حاجی آباد شعله کلاهی بهدخت مالامیریThe present research probed the sociocultural challenging variables which may affect EFL learners’ identity formation during their language studies in an Iranian context. A thorough analysis of the literature encompassing EFL teachers’ opinions and EFL cours چکیده کاملThe present research probed the sociocultural challenging variables which may affect EFL learners’ identity formation during their language studies in an Iranian context. A thorough analysis of the literature encompassing EFL teachers’ opinions and EFL coursebook analyses was performed to develop a comprehensive view of the recognized sociocultural domains and variables. Furthermore, an open-ended questionnaire was designed and distributed among 50 adolescent male and female EFL learners at the age range of 13-21 years (M=16) as Erickson’s identity confusion stage to identify the newest sociocultural challenging variables in the present Iranian context. The result of the research led to compilation of a Sociocultural Variables Inventory presenting an extended range of variables operating in the context of Iranian EFL learners’ identity formation. The inventory could act as a basis for research in the fields of TEFL, sociolinguistics, cultural studies, and further interdisciplinary research. پرونده مقاله -
دسترسی آزاد مقاله
249 - جستجو و تعیین میزان ملامین در شیر خشک نوزادان به روش الایزا
امیر شاکریان گلی صوابی اصفهانیدر سال 1391 تعداد 36 نمونه شیر خشک نوزادان با نشان های تجاری مختلف و تاریخ های تولید متفاوت از نقاط مختلف شهر اصفهان خریداری شد و با استفاده از روش غربال گریELISAجستجو و میزان ملامین در انواع شیر خشک نوزادان تعیین شد. بر اساس نتایج آزمایش ، در هیچ کدام از نمونه های شیر چکیده کاملدر سال 1391 تعداد 36 نمونه شیر خشک نوزادان با نشان های تجاری مختلف و تاریخ های تولید متفاوت از نقاط مختلف شهر اصفهان خریداری شد و با استفاده از روش غربال گریELISAجستجو و میزان ملامین در انواع شیر خشک نوزادان تعیین شد. بر اساس نتایج آزمایش ، در هیچ کدام از نمونه های شیر خشک نوزادان مقادیر بالاتر از حد تشخیص کیت µg/L)10) مشاهده نگردید. با توجه به نتایج به دست آمده در این بررسی، مصرف شیر خشک های نوزادان موجود در بازار اصفهان در سال جاری خطری از نظر آلودگی ملامین برای سلامتی نوزادان ندارد. پرونده مقاله -
دسترسی آزاد مقاله
250 - تأثیر ساختار متن بر عملکرد خواندن و درک مطلب زبان آموزان ایرانی در آزمونهای چهار جوابی و کلوز
هدایت اسلامی مهناز سعیدی سعیده آهنگریاین تحقیق به منظور بررسی عملکرد زبان آموزان ایرانی در آزمونهای خواندن و درک مطلب دارای ساختارهای متنی و روشهای پاسخدهی متفاوت انجام گرفته است. شرکتکنندگان این تحقیق ۲۲۸ نفر از دانشجویان زبان بودند که شامل ۸ گروه و بر اساس آزمون مهارت زبانی پت انتخاب شدند. چهار نوع س چکیده کاملاین تحقیق به منظور بررسی عملکرد زبان آموزان ایرانی در آزمونهای خواندن و درک مطلب دارای ساختارهای متنی و روشهای پاسخدهی متفاوت انجام گرفته است. شرکتکنندگان این تحقیق ۲۲۸ نفر از دانشجویان زبان بودند که شامل ۸ گروه و بر اساس آزمون مهارت زبانی پت انتخاب شدند. چهار نوع ساختار متنی ترتیب زمانی،توصیفی، علیت و حل مسئله انتخاب و بر اساس این متون،دو نوع آزمون با شیوه پاسخدهی چهارجوابی و چهارجوابی کلوز تهیه و به دانشجویان داده شد. نتایج بدست آمده نشان داد که در هر دو روش پاسخدهی عملکرد دانشجویان در متون دارای انسجام متنی ساده (ترتیب زمانی و توصیفی) بهتر از عملکرد آنان در متون دارای انسجام متنی پیچیده (علیت و حل مسئله) است. علاوه بر این،عملکرد دانشجویان در روش پاسخ دهی چهارجوابی بطور معنیدار بهتر از عملکرد آنها در روش پاسخدهی چهارجوابی کلوز در تمامی چهار نوع ساختار متنی بود. در پایان چنین نتیجهگیری شد که دانشجویان در ساختارهای متنی ترتیب زمانی و توصیفی عملکرد بهتری نسبت به ساختارهای متنی علیت و حل مسئله در هر دو روش پاسخدهی دارند و همچنین در روش پاسخ دهی چهارجوابی بهتر از روش پاسخدهی چهارجوابی کلوز در هر چهار نوع ساختار متنی هستند. معلمان میتوانند با بهرهگیری از نتایج این تحقیق و از طریق انتخاب بهترین روش پاسخدهی برای متون دارای ساختار متنی متفاوت عملکرد دانشجویان خود را در خواندن و درک مطلب بهبود بخشند پرونده مقاله -
دسترسی آزاد مقاله
251 - مبانی مدیریت سیاسی در اندیشه خواجه نظام الملک طوسی
عزیز جوانپور هرویمدیریت در معنای مدرن آن رفتاری است که فرد به نسبت موقعیت و جایگاهی که در اختیار دارد برای تمشیت امور سازمان زیر نظر خود انجام می دهد. اما این رفتار همواره می باید بر پایه ای نظری استوار باشد؛ به تعبیر دیگر آنچه که نوع وسنخ رفتار یک مدیر را سامان می دهد بنیان های تئوریک چکیده کاملمدیریت در معنای مدرن آن رفتاری است که فرد به نسبت موقعیت و جایگاهی که در اختیار دارد برای تمشیت امور سازمان زیر نظر خود انجام می دهد. اما این رفتار همواره می باید بر پایه ای نظری استوار باشد؛ به تعبیر دیگر آنچه که نوع وسنخ رفتار یک مدیر را سامان می دهد بنیان های تئوریک و ارزش هایی است که وی بدان باور دارد و از آن تبعیت می کند. این مبانی ممکن است بر اساس نوعی فلسفه ی عمل گرایانه یا کارکرد گرایانه و .. شکل گرفته باشد اما آنچه مسلم است این که لزوماً هر مدیریتی باید استراتژی مشخصی داشته باشد که ترسیم این استراتژی بر عهده نوعی تفکر متافیزیکی است که مدیر یا سیستم مدیریتی از آن تبعیت می کند.در این مقاله تلاش شده است که در یک مورد مطالعاتی تاثیر مبانی فکری و فلسفی بر روش مدیریتی یک مدیر بررسی و کاویده شود. بدین منظور خواجه نظام الملک طوسی، انتخاب گردیده است چراکه چندین ویژگی در وجود این شخص جمع شده است. اول این که از مدیران موفق و نوآور تمام ادوار تاریخ ایران می باشد و دوم این که به جهت آگاهی عمیقش از مبانی فلسفه سیاسی مسلمین مدیریت خود را بر اساس استراتژی و اندیشه خاصی سامان بخشیده است. پرونده مقاله -
دسترسی آزاد مقاله
252 - Effect of Protein Corona Formation on Photonic Response of Upconverting Nanoparticles
Nahid Ghazyani Mohammad Hossien Majles AraNaYF4:Yb,Er is one of the efficient and well-known upconverting materials which emit photoluminescence light at 545 nm and 660 nm under an excitation of 980 nm. In this study, up-conversion nanoparticles using thermal decomposition method have been synthesized and chara چکیده کاملNaYF4:Yb,Er is one of the efficient and well-known upconverting materials which emit photoluminescence light at 545 nm and 660 nm under an excitation of 980 nm. In this study, up-conversion nanoparticles using thermal decomposition method have been synthesized and characterized and phase transition from organic to aquas by synthesis a SiO2 shell have done successfully. The results show that the nonlinearity response of NaYF4: Yb, Er@SiO2 is same as NaYF4: Yb, Er and SiO2 has no effect on emission peaks it means that these nanoparticles are suitable for biomedical applications. Since it is necessary to know the photoluminescent behavior of UCNPs@SiO2 particles, thereby the fluorescence properties of up-conversion nanoparticles with SiO2 shell have been investigated in PBS, normal and cancerous human blood plasma. The results indicate that UCNP@SiO2 can be applicable in biological medias for therapy and diagnostic. پرونده مقاله -
دسترسی آزاد مقاله
253 - Sociological Analysis of Social Modernization and Its Impact on Forming a Family of Educated Youth )Case Study of Students of Golestan Province)
Mostafa KhosraviThis article seeks to analyze the sociological dimension of social modernization and its effect on family formation among university students in Golestan province. This article is based on data gathered by a survey on 400 young educated students, 18 to 50 years old, fro چکیده کاملThis article seeks to analyze the sociological dimension of social modernization and its effect on family formation among university students in Golestan province. This article is based on data gathered by a survey on 400 young educated students, 18 to 50 years old, from all levels of university education in Golestan province. The stratified random sampling method based on a given volume was used. Required information was collected by a valid and reliable questionnaire. Research findings show that there is a relationship between modernization and family formation. The indices of fit of goodness indicate that the overall effect of modernization of society on the family is approved. This means that people in the life of the factors modernization of society to further the work of slaves have, factors a family in it, and the more you than the other people have been . In other words, marriage and attitudes toward marriage modern than it had been . Although the arrival of some dimensions modernization of social change in a number of areas in the style of life of the people has changed, yet the population under study, compared to the resources of this change and its consequences ( at the level of the individual and society ) are open sighted knowledge and Of particular sensitivity . پرونده مقاله -
دسترسی آزاد مقاله
254 - تاثیر مولفه های فرم کالبدی شهری بر آسایش حرارتی فضاهای باز شهری (نمونه موردی: اراضی پشت سیلو شهر یزد)
مرجان منتظری لعلا جهانشاهلو حمید ماجدیبا مطرح شدن نظریههای شهر پایدار، شهر اکولوژیکی، بوم شهر، شهر هوشمند و شهر سبز در دهههای اخیر، توجه ویژه به طراحی سازگار با طبیعت، پایداری اکولوژیکی و مسائل اقلیمی مد نظر طراحان و برنامهریزان شهری قرار گرفته است؛ تحقیق حاضر با هدف تبیین معیارهای کالبدی موثر بر آسایش ح چکیده کاملبا مطرح شدن نظریههای شهر پایدار، شهر اکولوژیکی، بوم شهر، شهر هوشمند و شهر سبز در دهههای اخیر، توجه ویژه به طراحی سازگار با طبیعت، پایداری اکولوژیکی و مسائل اقلیمی مد نظر طراحان و برنامهریزان شهری قرار گرفته است؛ تحقیق حاضر با هدف تبیین معیارهای کالبدی موثر بر آسایش حرارتی فضاهای باز شهری و خرد اقلیم تدوین گردیده و بر آن است تا با استفاده از روش توصیفی-تحلیلی، به استخراج مولفههای فرم شهری تاثیرگذار بر آسایش حرارتی فضاهای باز شهری در سلسله مراتبی از بنا تا بافت، بپردازد. این تحقیق در بخشی از اراضی 17.5 هکتاری سیلو شهر یزد انجام گرفته است. در مرحله اول با روش شبیهسازی با استفاده از نرم افزار انویمت میزان دمای متوسط تابشی در نقاط منتخب سایت محاسبه گردیده و سپس آسایش حرارتی بر اساس شاخص PMV برای گروه مشخص در گرمترین روز سال 2015 برآورد شده است. در قسمت دوم با مقایسه آسایش حرارتی و عوامل فیزیکی محیط شامل ارتفاع، محصوریت، پوشش گیاهی و .... معیارهای فرم کالبدی موثر در تحقق آسایش حرارتی شناسایی گردیده اند. نتایج نشان میدهد ابعاد فضایی، کالبدی و محیطی عناصر تشکیل دهنده فرم شهری چون محصوریت (نسبت ارتفاع به عرضH/W)، ضریب دید به آسمان و الگوی شبکه معابر، مصالح (جنس، رنگ) بام، بدنه و کف، پوشش گیاهی (گونه و تراکم آن)، کاربری و ... از جمله عوامل موثر بر آسایش حرارتی فضاهای باز شهری هستند که توجه به آنها در فرایند برنامهریزی و طراحی شهری، میتواند سبب خلق فضاهایی شود که آسایش حرارتی را برای کاربران فراهم کند. پرونده مقاله -
دسترسی آزاد مقاله
255 - ارزیابی نقش فرم شهری در مصرف انرژی تودههای ساختمانی و آسایش حرارتی فضاهای باز شهری در اقلیم گرم و خشک
مریم فرخی شهاب کریمی نیادر گذشته شهرها از نظر توجه به محدودیتهای اکولوژیک نمونههای خوبی از طراحی شهری انرژی کارا بودهاند. با نگاهی به شهرهای سنتی و مقایسه آنها با شهرسازی مدرن امروزی، شاهد پیامدهای نامطلوب زیست محیطی در مقیاس طراحی واحدهای ساختمانی و نیز ساختار فضایی شهرها میباشیم. لذا به چکیده کاملدر گذشته شهرها از نظر توجه به محدودیتهای اکولوژیک نمونههای خوبی از طراحی شهری انرژی کارا بودهاند. با نگاهی به شهرهای سنتی و مقایسه آنها با شهرسازی مدرن امروزی، شاهد پیامدهای نامطلوب زیست محیطی در مقیاس طراحی واحدهای ساختمانی و نیز ساختار فضایی شهرها میباشیم. لذا به نظر میرسد ضروریست ضمن شناسایی عوامل موثر در در طراحی شهرهای پایدار سنتی، با بهرهگیری از نرم افزارهای شبیهسازی بتوان پیش از اجرای طرح و یا در مرحله ارائه گزینههای پیشنهادی، به فرمهای بهینه در اجزا (ساختمانهای منفرد) و ترکیبهای شهری (بافتهای شهری) دست یافت. پژوهش پیش رو با ترکیب روشهای توصیفی – تحلیلی، مطالعات گونهشناختی، ترسیم و شبیهسازی مدلها، به دنبال تحلیل مصرف انرژی و آسایش حرارتی در گونههای مختلف فرم ساختمانی، بلوکهای شهری و ساختار فضایی شهر اصفهان در 4 دوره تاریخی میباشد. لذا با بهرهگیری از نرمافزارهای شبیهسازی انرژی (دیزاین بیلدر) و آسایش حرارتی(انوی- مت) و تحلیل چیدمان فضاییارتباط مابین متغیرهای مستقل (مشخصههای کالبدی و فضایی بافت شهری) و متغیرهای وابسته، میزان مصرف انرژی (جهت تامین گرمایش، سرمایش و روشنایی) و آسایش حرارتی، در هر یک از سناریوهای پیشنهادی، مورد بررسی قرار گرفته است. بر اساس نتایج، میتوان دستورالعمل طراحی اقلیمی بافتهای شهری را در قالب سه مولفه؛ نظام و الگوی قطعهبندی و تفکیک زمین شهری، شکل و مشخصات توده/فضا در بافتهای شهری و الگوی شبکه معابر بافت، تنظیم و عملیاتی ساخت. فرمهای غالب دوره قاجار به لحاظ عملکرد انرژی و نیز همسازی با اقلیم، فرمهای پایدارتری نسبت به سایر دورههای تاریخی میباشند. همچنین ساختارهای فضایی با بیشترین میزان همپیوندی و اتصال فضایی میتوانند درصد بالاتری از شرایط آسایش حرارتی را در فضاهای باز شهری ایجاد نمایند. پرونده مقاله -
دسترسی آزاد مقاله
256 - Forming limit curves of AA3105 on multiple temperature conditions: numerical investigation and experimental verification
Behzad Hadiyan Ramin Hashemi Habibollah AkbariIn this paper, Forming Limit curves (FLCs) of AA3105 aluminum alloy sheet were obtained at four different temperatures using the Nakazima test. A novel approach based on the Nakazima test was applied to fabricate the experimental setup for determining forming limit diag چکیده کاملIn this paper, Forming Limit curves (FLCs) of AA3105 aluminum alloy sheet were obtained at four different temperatures using the Nakazima test. A novel approach based on the Nakazima test was applied to fabricate the experimental setup for determining forming limit diagrams (FLDs) at elevated temperatures. First, the Nakazima-die-set was manufactured, and a thermal system was prepared for increasing sheet and die’s temperature; then AA3105 samples were tested at four different temperatures experimentally. Moreover, the ABAQUS finite element software was employed. Three different criterions including the 2nd order of derivatives for major strain, equivalent plastic strain, and thickness strain were applied to estimate the onset of localized necking. The numerical results were verified by experiment. Both the experimental and finite element method results illustrated that the level of the forming limit diagram for the aluminum sheets improved by increasing its temperature. The forming limit improvement was not equal in every strain paths. پرونده مقاله -
دسترسی آزاد مقاله
257 - Optimization of the strain distribution in the roll forming process using the desirability function and finite element methods
Siroos Ahmadi Vali Alimirzaloo Meysam Abdollahzade GavganiDefects of the roll forming process are affected by amount and situation of the strains distribution. The effect of the process parameters on the strain distribution in the round cross section roll forming process has been studied. Finite element and response surface me چکیده کاملDefects of the roll forming process are affected by amount and situation of the strains distribution. The effect of the process parameters on the strain distribution in the round cross section roll forming process has been studied. Finite element and response surface method have been used for process modelling. Then desirability functions approach and overlaid counter plots have been employed for optimization of the process. Three factors included roll diameter, distance between the stations and linear speed of the sheet are considered as input parameters. Sum of longitudinal maximum strain and transverse strain distribution uniformity were taken as response functions. Response function model for each function was obtained using the RSM. Finally, optimization of the process has been done using the desirability function approach and overlaid contour plots .Results show that both of the response surface models have good model adequacy. Optimization by desirability functions approach was presented as points which according to the type of the process and production requirements can only be used to start and preliminary design. But the overlaid contour plots have flexibility in output for manufacturing processes. Output overlaid contour plots provide optimum area that there is wide range of values for choices in different condition. پرونده مقاله -
دسترسی آزاد مقاله
258 - Statistical Analysis and Optimization of Factors Affecting the Surface Roughness in UVaSPIF Process Using Response Surface Methodology
Mehdi Vahdati Ramezanali Mahdavinejad Saeid Amini Mahmoud MoradiUltrasonic vibration assisted single point incremental forming (UVaSPIF) is based on localized plastic deformation in a sheet metal blank. It consists to deform gradually and locally the sheet metal using vibrating hemispherical-head tool controlled by a CNC milling mac چکیده کاملUltrasonic vibration assisted single point incremental forming (UVaSPIF) is based on localized plastic deformation in a sheet metal blank. It consists to deform gradually and locally the sheet metal using vibrating hemispherical-head tool controlled by a CNC milling machine. The ultrasonic excitation of forming tool reduces the vertical component of forming force. In addition, application of ultrasonic vibration reduces the surface roughness of the specimen. Surface roughness is one of the quantitative and qualitative parameters, which is used to assess the quality of the final product. In the present paper, a statistical analysis and optimization of effective factors on this parameter is performed in the UVaSPIF. For this purpose, response surface methodology (RSM) is selected as the experiment design technique. The controllable factors such as vertical step size, sheet thickness, tool diameter, wall inclination angle, and feed rate is specified as input variables of the process. The obtained results from analysis of variance (ANOVA) and regression analysis of experimental data confirm the accuracy of mathematical model. Furthermore, it is shown that the linear, quadratic, and interactional terms of the variables are effective on the surface roughness parameter. To optimize the surface roughness parameter, the finest conditions of the experiment are determined using desirability method, and statistical optimization is subsequently verified by conducting the confirmation test. پرونده مقاله -
دسترسی آزاد مقاله
259 - Characterization of Microstructure and Bending Response of Sheet Material: Influence of Thickness
Mustafa Özdemir Hakan Gökmese H Dilipak V YilmazBending process is one of the most significant fields of application of sheet metal die. In bending process, it is quite vital that the product should have the desired angle. Furthermore, in order to obtain the desired angle in the bent parts, spring-go and spring-back چکیده کاملBending process is one of the most significant fields of application of sheet metal die. In bending process, it is quite vital that the product should have the desired angle. Furthermore, in order to obtain the desired angle in the bent parts, spring-go and spring-back amounts must be known. In this study, 30o, 60o and 90o bending processes were applied to S235JR (1.0038) sheet metal having 3, 4, 5 and 6 mm thickness. These materials were bent in three forms as heat-untreated, normalized and tempered. In addition to this, the bending process was carried out by making the punch waited on the material for 30 seconds (30 s-punch-wait bending) and by removing the punch without waiting (direct bending). As a result of the experiments it was determined that while the amount of spring-go increased in 30o bending process depending on the thickness of the material, it decreased in 60o and 90o applications. It was also determined that the amount of spring-go in 30 s punch-wait bending process was less than that of the direct bending process. Finally, the effects on the bending process and deformation of heat treatment were revealed by micro-structural characterization. پرونده مقاله -
دسترسی آزاد مقاله
260 - Optimization of laser forming parameters using genetic algorithms
Rasoul Tarkesh Esfahani Sa&#039;id Golabi zahra zojajiThe use of lasers is being considered as a modern method for forming process in recent years. This method has been used in various industries, such as aerospace, marine and oil industry. Extensive research has been done in the field of modeling and optimization of direc چکیده کاملThe use of lasers is being considered as a modern method for forming process in recent years. This method has been used in various industries, such as aerospace, marine and oil industry. Extensive research has been done in the field of modeling and optimization of direct paths parameters with process of laser forming. Although forming in circular paths can be used for producing complex parts, due to some technical reasons, it is considered less. The main purpose of this paper is to detect the proper estimation model and obtain optimal variables conditions for complete circular paths in perforated circular parts by means of genetic algorithms. In this process the outer edges are fixed and the inner edges are being formed by laser. At first, the finite element simulation model is studied then the estimation model has been discussed, after that multi-objective functions have been examined with the least error and energy. Furthermore, the optimization results of the internal hole diameters are reported and analyzed in terms of Pareto charts. In conclusion, optimum forming conditions have been reported in terms of accuracy and energy for different diameters of holes. This study shows with acceptable increasing in the error rate, the required energy could be reduced. Also, increasing in the diameter of inside hole cause to increase energy and decrease of accuracy. پرونده مقاله -
دسترسی آزاد مقاله
261 - Effect of Tool Pin Shape on Defect-Free FSP and Particles Distribution in SiC/Al6061 Composites
Morteza Ezzati Parviz Asadi Mostafa AkbariIn this research, Al-SiC composites were produced using FSP tools with different pin shapes to investigate the distribution of reinforcing particles in the base metal. First, to obtain the optimal rotational and traverse speed and tilt angle, several tests were performe چکیده کاملIn this research, Al-SiC composites were produced using FSP tools with different pin shapes to investigate the distribution of reinforcing particles in the base metal. First, to obtain the optimal rotational and traverse speed and tilt angle, several tests were performed on different parameters. The results showed that the rotational speed of 1250 rpm and the traverse speed of 100 mm/min in all tools produced flawless samples. Then, tools with different tool pin profiles of triflate, cylindrical, threaded, triangular, square, and hexagonal were utilized in this study. The distribution of reinforcing particles in the base metal was studied using a light microscope. The results showed that the cylindrical tool was not able to distribute particles in the base metal even after four passes of the process and was not a suitable tool for composite production. Tools with flat surfaces, such as square and triangular tools, have performed better in distributing reinforcing particles in the base metal. The results showed that the presence of a kind of eccentricity and pulse production in these tools had improved the distribution of particles. Threaded and hexagonal tools have the best performance in the distribution of reinforcing particles in the base metal and can be introduced as a suitable tool for composite products in the FSP process. The results of this study also showed that the change in the direction of tool rotation improved the distribution of reinforcing particles in all tools. پرونده مقاله -
دسترسی آزاد مقاله
262 - واکاوی شرایط همدید رخداد تند باد و توفان گرد و غبار شیراز اسفند 1399
اشرف اسدیبا نزدیک شدن به فصول گذار در انتهای فصل زمستان ، تغییر در شرایط الگوهای حرکت و تندی باد در عرض های میانه پدیده ای اجتناب ناپذیر است که گاهاً می تواند مدیریت بحران و رفت و آمد در معابر شهری را با مشکل مواجه کند . هدف این پژوهش بررسی شرایط همدید شکل گیری تند باد و توفان گ چکیده کاملبا نزدیک شدن به فصول گذار در انتهای فصل زمستان ، تغییر در شرایط الگوهای حرکت و تندی باد در عرض های میانه پدیده ای اجتناب ناپذیر است که گاهاً می تواند مدیریت بحران و رفت و آمد در معابر شهری را با مشکل مواجه کند . هدف این پژوهش بررسی شرایط همدید شکل گیری تند باد و توفان گرد و غبار در شهر شیراز در روز در 22 اسفند 1399 می باشد. برای رسیدن به این هدف با رویکرد محیطی به گردشی از داده های روزانه بارش ، سرعت باد و گرد و غبارِ سازمان هواشناسی و داده های دمای هوا، ارتفاع ژئوپتانسیل ، فشار تراز دریا ، باد مداری، باد نصف النهاری، رطوبت ویژه و اُمگا از پایگاه داده NCEP/NCAR جهت بررسی تراز فوقانی جو استفاده شده است. نتایج نشان داد که قرار گیری منطقه مورد مطالعه در زیر ناحیه فرارفت تاوایی مثبت در شرق ناوه بادهای غربی که منجر به واگرایی بالایی و همگرایی پایینی می گردد ، برقراری شیو دما و جبهه زایی و به ویژه فرود رودباد جبهه قطبی تا ترازهای پایین جو ، شرایط همدید برای رخداد صعود شدید هوا و شکل گیری تندباد های شدید ناشی از آن را در روز مورد مطالعه فراهم کرده است. این پژوهش می تواند با شناسایی عوامل تاثیر گذار بر رخداد تند بادها مبنای علمی مطلوبی، برای حفاظت و بهبود شرایط سکونت گاه های انسانی باشد. پرونده مقاله -
دسترسی آزاد مقاله
263 - ارتباط بین سازندهای زمینشناسی و فرم منحنی میزان نقشههای توپوگرافی در بخشی از البرز شمالی و جنوبی
عیسی جوکار سرهنگی منصور بخشیتهیه نقشههای ژئومورفولوژی مستلزم صرف وقت و هزینههای زیاد برای جمع آوری اطلاعات در زمینههای مواد مادری و لند فرمهاست. ثبت ویژگیهای مواد مادری در نقشههای ژئومورفولوژی معمولاً بر اساس نقشههای زمینشناسی، عملیات صحرایی و تفسیر عکسهای هوایی صورت میگیرد؛ اما با توجه چکیده کاملتهیه نقشههای ژئومورفولوژی مستلزم صرف وقت و هزینههای زیاد برای جمع آوری اطلاعات در زمینههای مواد مادری و لند فرمهاست. ثبت ویژگیهای مواد مادری در نقشههای ژئومورفولوژی معمولاً بر اساس نقشههای زمینشناسی، عملیات صحرایی و تفسیر عکسهای هوایی صورت میگیرد؛ اما با توجه به اینکه مقاومت سنگها در برابر فرسایش متفاوت است، شناسایی و تفکیک آنها به کمک نقشههای توپوگرافی 1:25000 و با مطالعه فرم منحنی میزان امکانپذیر میباشد. هدف از این پژوهش شناسایی فرمهای منحنی میزان نقشههای توپوگرافی به کمک تفسیر بصری و یافتن ارتباط آن با سازندهای زمینشناسی منطقه در بخشی از البرز شمالی و جنوبی است. برای این منظور، فرمهای منحنی میزان موجود شامل منحنی صاف، سینوسی ساده، سینوسی بلند و کشیده، سینوسی متراکم و پنجهای و همچنین منحنی پالسی در نقشههای توپوگرافی منطقه تفکیک و طبقهبندی شده و با نقشه سازندهای منطقه که به کمک نقشههای زمینشناسی 1:100000 سازمان زمینشناسی کشور تهیه شد، همپوشانی شد. برای تحلیل ارتباط بین آنها از آزمونهای آماری کای دو () استفاده شده است. نتایج نشان داد که فرمهای منحنی میزان سازندهای زمینشناسی منطقه در سطح 01/0 تفاوت معنیداری با یکدیگر دارند. فرمهای منحنی میزان صاف و ساده در سنگهای سخت و مقاوم و فرمهای سینوسی متراکم در سازندهای سست غلبه داشته و از مقدار مورد انتظار بیشتر هستند؛ بنابراین جنس سنگ در ایجاد فرمهای خاص منحنی میزان نقشههای توپوگرافی منطقه مؤثر است و از آنجا که تشخیص این فرمها در این نقشهها بهراحتی امکانپذیر است، میتوان از نقشههای توپوگرافی برای تهیه اطلاعات مواد مادری نقشههای ژئومورفولوژی بهره گرفت. پرونده مقاله -
دسترسی آزاد مقاله
264 - مطالعه فلورستیک تالابهایآلاگل، آلماگل و آجیگل و مناطق پیرامونی آنها در استان گلستان
جمیله پناهی میرزاحسنلو نورمحمد شیرمحمدلی عیسی جرجانی نورمحمد نظریتعیین فلور مناطق‎طبیعی، پایه و اساس برنامهریزیهای زیست‎محیطی برای هر منطقه و شناخت وضع پوشش‎گیاهی آن است. هدف از مطالعه حاضر، بررسی فلور و پراکنش جغرافیایی گیاهان در تالابهای آلاگل، آلماگل و آجیگل در استان گلستان میباشد. به منظور مطالعۀ فلور منطقه، گیاه چکیده کاملتعیین فلور مناطق‎طبیعی، پایه و اساس برنامهریزیهای زیست‎محیطی برای هر منطقه و شناخت وضع پوشش‎گیاهی آن است. هدف از مطالعه حاضر، بررسی فلور و پراکنش جغرافیایی گیاهان در تالابهای آلاگل، آلماگل و آجیگل در استان گلستان میباشد. به منظور مطالعۀ فلور منطقه، گیاهان طی فصول رویشی سال‎های 1394 تا 1395جمع آوری شده و شناسایی شدند. در این مطالعه بطور کلی تعداد 105گونه متعلق به 84 جنس و 39 تیره شناسایی شد که بزرگترین تیرهها از نظر تعداد گونه شامل تیره Asteraceae با 18 گونه، Chenopodiaceae با 18 گونه و Poaceae با 14 گونه میباشند. از نظر شکل‎زیستی، تروفیتها با 3/48% و همیکریپتوفیتها با 9/21% فراوان ترین شکل‎های زیستی در منطقه مورد مطالعه بودند. بیشترین پراکنش جغرافیایی را عناصر چندناحیهای (PL) با 20% و عناصر ایرانی- تورانی (IT) با 19/16% به خود اختصاص داده بودند. در بررسی مقایسهای سه تالاب مشخص شد که به لحاظ شکل‎زیستی، تروفیتها در هر سه تالاب غالبترین شکل زیستی را دارند پس از تروفیتها، همیکریپتوفیتها در ردۀ بعدی قرار می گیرند. به لحاظ پراکنش جغرافیایی نیز عناصر دو یا چند ناحیه ای در هر سه تالاب بیشترین درصد فلور را تشکیل میدهند. پرونده مقاله -
دسترسی آزاد مقاله
265 - ارزیابی ارتباط برخی خصوصیات خاک با فاکتورهای خاکسازی (مطالعه موردی: چهار حوزه آبخیز در استان قزوین)
علیرضا پژوهنده علی محمدی ترکاشوند ابوالفضل معینی ابراهیم پذیراعوامل موثر در تشکیل خاک شامل مواد مادری، اقلیم، توپوگرافی، زمان و موجودات زنده می باشند. تغییرات این فاکتورهای خاکسازی باعث به وجود آمدن خصوصیات فیزیکی و شیمیایی متفاوت در خاک میشود. هدف از این تحقیق بررسی رابطه فاکتورهای خاکساز با خصوصیات فیزیکو شیمیایی خاک بود. بدین چکیده کاملعوامل موثر در تشکیل خاک شامل مواد مادری، اقلیم، توپوگرافی، زمان و موجودات زنده می باشند. تغییرات این فاکتورهای خاکسازی باعث به وجود آمدن خصوصیات فیزیکی و شیمیایی متفاوت در خاک میشود. هدف از این تحقیق بررسی رابطه فاکتورهای خاکساز با خصوصیات فیزیکو شیمیایی خاک بود. بدین منظور در چهار حوزه آبخیز از استان قزوین، به نام های جوینک، مدان، نیارک و پلنگه ابتدا نقشه واحدهای کاری با بازدیدهای صحرایی به کمک سامانه اطلاعات جغرافیایی در مقیاس 1:25000 تهیه شد. تعداد 101 نمونه خاک برداشت و مقدارEC ،pH ، درصد مواد آلی، درصد شن، درصد سیلت و درصد رس اندازهگیری شد. از رگرسیون چند متغیره خطی به سه روش Enter، Forward و Stepwise برای بررسی ارتباط فاکتورهای خاکسازی و خصوصیات خاک استفاده شد. به طوری که فاکتورهای خاکساز متغیرهای مستقل و خصوصیات خاکها متغیر وابسته بودند. برای بررسی مواد مادری از عامل حساسیت به فرسایش سنگ ها، برای موجودات زنده، درصد مواد آلی از طریق آنالیز آزمایشگاه، برای توپوگرافی از دو عامل شیب و ارتفاع و از دوران زمین شناسی برای بررسی زمان و برای عامل آب و هوا از دو عامل باران و دما استفاده گردید. برای صحت سنجی این مدلها از دو آماره ضریب تبیین و میانگین مربعات خطا استفاده شد. نتایج نشان داد بهترین مدل در ارتباطpH با فاکتورهای خاکسازی (در رگرسیون به روش Enter) با R2 = 78/0 و 56/0RMSE= بدست آمد. مقادیر R2 برای ارتباط سیلت، رس و هدایت الکتریکی در ارتباط با فاکتورهای خاکسازی کمتر از 50 درصد بود. باتوجه به مدلهای بدست آمده در این پژوهش، مشخص شد میتوان با استفاده از مدلسازیهای گستردهتر اقدام به تهیه نقشههای خصوصیات فیزیکو شیمیایی خاک با کمک نقشههای فاکتورهای خاکسازی در مناطق مختلف کرد. پرونده مقاله -
دسترسی آزاد مقاله
266 - معرفی فلور، شکل زیستی و پراکنش جغرافیایی گیاهان منطقه هرارون استان کرمان
سید محمد علی وکیلی شهربابکیمنطقه هرارون با وسعت حدود 13000هکتار و ارتفاع متوسط 2044 متر از سطح دریا، در جنوب شهرستان بافت استان کرمان قرار دارد. هدف از این تحقیق، شناسایی و معرفی فلور منطقه بوده است. این ناحیه شامل 112 گونه گیاهی (3بازدانه، 7تک لپه و102دولپه) می باشد که متعلق به 33 تیره و 89 جنس چکیده کاملمنطقه هرارون با وسعت حدود 13000هکتار و ارتفاع متوسط 2044 متر از سطح دریا، در جنوب شهرستان بافت استان کرمان قرار دارد. هدف از این تحقیق، شناسایی و معرفی فلور منطقه بوده است. این ناحیه شامل 112 گونه گیاهی (3بازدانه، 7تک لپه و102دولپه) می باشد که متعلق به 33 تیره و 89 جنس است. مهمترین تیره های گیاهی به ترتیب تعداد شامل: Asteracea با 15 گونه، Lamiaceae با 15 گونه، Papilonaceae با 13گونه، Rosaceae با 8گونه و Geramineaeبا 6گونه می باشند. شکل زیستی عمده منطقه، به صورت همی کریپتوفیت با%47/29، تروفیت با%67/27، کامفیت با %64/11، فانروفیت با %6/11، ژئوفیت با %6/11 وکریپتوفیت با %14/7 می باشد. از لحاظ عناصر رویشی منطقه% 17/65 ایرانی- تورانی، % 5/12 ایرانی تورانی صحرا سندی، % 05/8 صحرای سندی، % 25/6 مدیترانه ای، % 57/3 جهان وطنی و %46/4 مربوط به منطقه هیرکانی می باشد. پرونده مقاله -
دسترسی آزاد مقاله
267 - بررسی کارکردهای ساختار گیاهی درمراتع ییلاقی آذربایجان غربی با استفاده از LFA
آزاده عالم زاده گرجی غلامعلی حشمتیاکوسیستم مرتعی از قطعات متنوعی تشکیل شده است که میزان عملکرد هر یک از آنها به یکدیگر تفاوت می کند. شناخت کارکرد یک اکوسیستم طبیعی نیاز به آگاهی از مشخصه ها و معرف های خاکی و گیاهی دارد که بتوان به توانمندی و پتانسیل آن اکوسیستم پی برد. بررسی روابط بین پوشش گیاهی و خاک چکیده کاملاکوسیستم مرتعی از قطعات متنوعی تشکیل شده است که میزان عملکرد هر یک از آنها به یکدیگر تفاوت می کند. شناخت کارکرد یک اکوسیستم طبیعی نیاز به آگاهی از مشخصه ها و معرف های خاکی و گیاهی دارد که بتوان به توانمندی و پتانسیل آن اکوسیستم پی برد. بررسی روابط بین پوشش گیاهی و خاک کمک شایانی به شناخت پتانسیل ها و عملکرد مراتع خواهد داشت. این بررسی، با استفاده از روش تجزیه و تحلیل کارکرد اکوسیستم طبیعی (LFA) پتانسیل و توانمندی بالقوه اراضی مرتعی چشم اندازهای شمالی و جنوبی که معرف مراتع ییلاقی آذربایجان غربی میباشد را مورد مطالعه قرار داد. در این راستا طول و عرض قطعات اکولوژیک شامل فرمهای رویشی بوته، بوته-گراس، بوته-فورب و درختچه، تعداد آن و پارامترهای 11 گانه سطح خاک بر روی سه ترانسکت 50 متری در امتداد شیب دو دامنه شمالی و جنوبی ثبت شد. تجزیه تحلیل دادهها با استفاده از نرم افزار spss و آزمون t مستقل انجام میشود. نتایج آزمون t مستقل نشان داد، دامنه شمالی از لحاظ پارامترهای مورد مطالعه به طور معنی داری از دامنه جنوبی بیشتر بود. فرم رویشی بوته به عنوان معرف اکولوژیک هر دو دامنه در منطقه قلمداد میشود. این فرم رویشی در ترکیب با فورب و گندمیها گونههایی مناسب در جهت عملیات اصلاحی در این مراتع میباشند. از سوی دیگر لزوم گسترش درختچه scoparia Amigdalus به دلیل تاثیر غیر قابل انکاری که علارغم تراکم پایین در منطقه، بر روی فاکتورهای نفوذ پذیری، پایداری خاک و چرخه مواد غذایی داشته است، از لحاظ مدیریتی توصیه میشود. شاخص نظام یافتگی چشم انداز در دامنه شمالی بیشتر از دامنه جنوبی می باشد. پرونده مقاله -
دسترسی آزاد مقاله
268 - مطالعه فلوریستیک منطقه وارک خرمآباد (استان لرستان)
فاطمه پورفلاحی غلامحسن ویسکرمیچکیده منطقه وارک با مساحت 2000 هکتار در جنوبغربی خرمآباد واقع شده است. حداقل ارتفاع 1190 متر و حداکثر ارتفاع 1990 متر از سطح دریا می باشد. مطالعات انجام شده نشان داد که در منطقه مورد مطالعه 49 خانواده، 156 سرده و 254 گونه گیاهی وجود دارد. از مهم ترین خانواده های منطق چکیده کاملچکیده منطقه وارک با مساحت 2000 هکتار در جنوبغربی خرمآباد واقع شده است. حداقل ارتفاع 1190 متر و حداکثر ارتفاع 1990 متر از سطح دریا می باشد. مطالعات انجام شده نشان داد که در منطقه مورد مطالعه 49 خانواده، 156 سرده و 254 گونه گیاهی وجود دارد. از مهم ترین خانواده های منطقه می توان خانوادهFabaceae(33 گونه) و Lamiaceae(27 گونه) را نام برد. تروفیت ها (47 درصد)، ژئوفیت ها (26 درصد)، کاموفیت ها (12 درصد)، همیکریپتوفیت ها (10 درصد) و فانروفیت ها (5 درصد) مهمترین گروههای ساختاری طیف زیستی منطقه به روش رانکایر بودند. از نظر عناصر رویشی منطقه، 43 درصد ایرانی – تورانی ، 23 درصد مدیترانهای و ایرانی– تورانی و 17 درصد چند منطقهای (ایرانی - تورانی، مدیترانهای و اروپا – سیبری) و 5 درصد عنصر جهانی می باشند. هدف از این تحقیق، شناسایی گونههای گیاهی منطقه وارک در شهرستان خرمآباد بوده است پرونده مقاله -
دسترسی آزاد مقاله
269 - معرفی فلور منطقه کهمان الشتر، استان لرستان
عارفه حسنوند یونس عصری حسین لاری یزدی و محمد مهرنیاذخیرهگاه کهمان به وسعت 400 کیلومتر مربع واقع در شمال شرقی الشتر، زیستگاههای متنوعی از صخرهها و برونزدگیهای سنگی، دشتهای دامنهای، دشتهای آبرفتی، درهها و چشمهها را دارا میباشد. محدوده ارتفاعی منطقه از 1600 تا3600 متر بالای سطح دریا متغیر است. میانگین بارندگی سالانه چکیده کاملذخیرهگاه کهمان به وسعت 400 کیلومتر مربع واقع در شمال شرقی الشتر، زیستگاههای متنوعی از صخرهها و برونزدگیهای سنگی، دشتهای دامنهای، دشتهای آبرفتی، درهها و چشمهها را دارا میباشد. محدوده ارتفاعی منطقه از 1600 تا3600 متر بالای سطح دریا متغیر است. میانگین بارندگی سالانه 554 میلیمتر و متوسط دمای سالانه آن 2/15 درجه سانتیگراد است. در این بررسی تعداد 224 گونه و تقسیمات تحتگونهای متعلق به 47 تیره و 153 جنس از سطح منطقه جمعآوری و شناسایی گردید. به ترتیب تیرههای Asteraceae با 34 گونه، Lamiaceae با 25 گونه، Fabaceae و Poaceae هر یک با 21 گونه مهمترین تیرههای گیاهی منطقه هستند. بررسی شکل زیستی گیاهان به روش رونکیه نشان داد که گیاهان تروفیت با 1/45 درصد (101 گونه) و همیکریپتوفیت با 9/33 درصد (76 گونه) فراوانترین شکلهای زیستی منطقه میباشند. بررسی پراکنش جغرافیایی گیاهان نیز نشان داد که 1/49 درصد گونهها (110 گونه) به ناحیه رویشی ایران – تورانی تعلق دارند که از این تعداد 25 گونه انحصاری ایران میباشند. پرونده مقاله -
دسترسی آزاد مقاله
270 - معرفی فلور، شکل زیستی و پراکنش جغرافیایی گیاهان منطقه ورسان در شهرستان آشتیان (استان مرکزی) ایران
معصومه خسروی رینه یونس عصری عظیم ابوطالبیمنطقه ورسان، با مساحت حدود 990 هکتار در شمال شهرستان آشتیان واقع شده است. ارتفاع منطقه از سطح دریا بین 2042 تا 2314 متر میباشد. مقدار بارندگی سالانه منطقه، 11/333 میلیمتر و متوسط دمای سالانه آن، 5/11 درجه سانتیگراد است. هدف اصلی این پژوهش شناسایی گونههای گیاهی و معرف چکیده کاملمنطقه ورسان، با مساحت حدود 990 هکتار در شمال شهرستان آشتیان واقع شده است. ارتفاع منطقه از سطح دریا بین 2042 تا 2314 متر میباشد. مقدار بارندگی سالانه منطقه، 11/333 میلیمتر و متوسط دمای سالانه آن، 5/11 درجه سانتیگراد است. هدف اصلی این پژوهش شناسایی گونههای گیاهی و معرفی فلور منطقه، تعیین شکلهای زیستی گیاهان و پراکنش جغرافیایی آنها میباشد. به این منظور نمونههای گیاهی منطقه، در سال 1387 جمعآوری و با استفاده از فلورهای معتبر شناسایی، شکلهای زیستی گونهها تعیین و طیف زیستی منطقه ترسیم گردید. بر اساس اطلاعات بدست آمده از پراکنش جغرافیایی گونههای گیاهی و منابع موجود، جایگاه منطقه از نظر جغرافیای گیاهی ایران مورد بررسی قرار گرفت. تعداد 270 گونه در منطقه شناسایی شد که به 37 تیره و 139 جنس تعلق دارند. بیشترین غنای گونهای در تیرههای Asteraceae (45 گونه)، Papilionaceae (36 گونه)، Poaceae (22 گونه) و Apiaceae (19 گونه) دیده میشود. در بین گیاهان منطقه، همیکریپتوفیتها با 127 گونه (47 درصد) فراوانترین شکل زیستی منطقه بوده و پراکنش 201 گونه (44/74 درصد) به ناحیه ایران - تورانی منحصر میگردد. پرونده مقاله -
دسترسی آزاد مقاله
271 - مطالعه رستنیهای ( فلورستیکی) منطقه عین الکش کرمانشاه
مهتاب شهرکی منیژه پاکروان یونس عصریمنطقه عین الکش با مساحت حدود 2500 هکتار در جنوب غربی کرمانشاه واقع شده است. حداقل ارتفاع منطقه 1550 متر و حداکثر ارتفاع 1850متر از سطح دریا میباشد. میانگین بارندگی سالانه منطقه 7/430 میلیمتر و متوسط دمای سالانه آن 1/15 درجه سانتیگراد است. هدف اصلی این پژوهش شناسایی گون چکیده کاملمنطقه عین الکش با مساحت حدود 2500 هکتار در جنوب غربی کرمانشاه واقع شده است. حداقل ارتفاع منطقه 1550 متر و حداکثر ارتفاع 1850متر از سطح دریا میباشد. میانگین بارندگی سالانه منطقه 7/430 میلیمتر و متوسط دمای سالانه آن 1/15 درجه سانتیگراد است. هدف اصلی این پژوهش شناسایی گونههای گیاهی و معرفی فلور منطقه، تعیین شکلهای زیستی گیاهان و پراکنش جغرافیایی آنها می باشد. به این منظور نمونههای گیاهی از زیستگاههای مختلف منطقه طی دوره رویشی سال 1385 جمع آوری و با استفاده از فلورهای مختلف شناسایی شدند. شکلهای زیستی گونههای شناسایی شده تعیین گردید و طیف زیستی منطقه ترسیم شد. بر اساس اطلاعات به دست آمده از پراکنش جغرافیایی گونه ها و منابع موجود، جایگاه منطقه از نظر جغرافیای گیاهی ایران مورد بررسی قرار گرفت. تعداد 156 گونه و تقسیمات تحت گونه ای شناسایی شده از منطقه به 27 تیره و 118 جنس تعلق دارند. بیشترین غنای گونهای در تیرههای Asteraceae (32 گونه)، Fabaceae (27 گونه) و Poaceae (14 گونه) دیده میشود. در بین گیاهان منطقه تروفیتها با 91 گونه (3/58 درصد) فراوان ترین شکل زیستی منطقه هستند. پراکنش 86 گونه (1/55 درصد) به ناحیه ایران ـ تورانی منحصر میگردد که از این تعداد 12 گونه اندمیک ایران هستند. پرونده مقاله -
دسترسی آزاد مقاله
272 - معرفی فلور، شکل زیستی و پراکنش جغرافیایی گیاهان منطقه ندوشن (استان یزد)
علی میرحسینی عباس زارع زاده ناصر باغستانی میبد مهدی سلطانی گرد فرامرزیمنطقه ندوشن بخشی از شهرستان صدوق به وسعت 109400هکتاراست که در فاصله80 کیلومتری غرب شهر یزد قرار دارد. از نظر موقعیت جغرافیایی در محدوده 46 و 31 تا 15و32 عرض شمالی و 24 و 52 تا 47 و 53 طول شرقی قراردارد. حداقل و حداکثر ارتفاع منطقه از سطح دریا 1529 و3260 متر میباشد. میز چکیده کاملمنطقه ندوشن بخشی از شهرستان صدوق به وسعت 109400هکتاراست که در فاصله80 کیلومتری غرب شهر یزد قرار دارد. از نظر موقعیت جغرافیایی در محدوده 46 و 31 تا 15و32 عرض شمالی و 24 و 52 تا 47 و 53 طول شرقی قراردارد. حداقل و حداکثر ارتفاع منطقه از سطح دریا 1529 و3260 متر میباشد. میزان متوسط بارندگی سالیانه منطقه بین 109 تا 220 میلیمتراست که درارتفاعات بیشتر به صورت برف میباشد. بررسی به عمل آمده (1385-1375) نشان داد که در منطقه مورد مطالعه 282 گونه گیاهی متعلق به 204 جنس و 48 تیره وجود دارد. بیشترین تعداد گونهها، به ترتیب مربوط به تیرههای Asteraceae با 44 گونه (6/15 درصد)، Papilionaceae با 27 گونه (57/9 درصد)، Brassicaceae با 25 گونه (86/8 درصد) و Lamiaceae با 24 گونه (51/8 درصد) است. بررسی اشکال زیستی گیاهان به روش رونکیه نشان داد که همی کریپتوفیتها با 94/37 درصد (107 گونه) فراوانترین شکل زیستی هستند. شکلهای زیستی تروفیت با 72/28 درصد (81 گونه) و کامفیت با 31/16 درصد (46 گونه) در درجه بعدی قرار دارند. پراکنش جغرافیایی گیاهان منطقه نشان میدهد که 47/74 درصد گونهها (210 گونه) به ناحیه ایرانی ـ تورانی تعلق دارند. سایرگونهها علاوه بر ناحیه ایرانی ـ تورانی در نواحی رویشی دیگر نیز پراکنش دارند. از 282 گونه فلور منطقه 55 گونه (5/19 درصد) گیاه دارویی، 32 گونه (35/11 درصد) انحصاری ایران و 3 گونه انحصاری یزد هستند. پرونده مقاله -
دسترسی آزاد مقاله
273 - بررسی فلور اشکال زیستی و کوروتیپهای گیاهان منطقه خضرآباد (ارزانک)، استان یزد
غلامرضا بخشی خانیکی رزا قوچانیمنطقه خضرآباد با مساحت حدود 1146 کیلومتر مربع در قسمت غرب دشت یزد اردکان واقع شده است. این منطقه دارای تعدادی حوزه آبخیز میباشد که ارزانک یکی ازحوزههای بزرگ آن است. هدف اصلی این پژوهش، شناسایی گونههای گیاهی و معرفی فلور یکی از واحدهای هیدرولوژیکی حوزه آبخیز ارزانک اس چکیده کاملمنطقه خضرآباد با مساحت حدود 1146 کیلومتر مربع در قسمت غرب دشت یزد اردکان واقع شده است. این منطقه دارای تعدادی حوزه آبخیز میباشد که ارزانک یکی ازحوزههای بزرگ آن است. هدف اصلی این پژوهش، شناسایی گونههای گیاهی و معرفی فلور یکی از واحدهای هیدرولوژیکی حوزه آبخیز ارزانک است. به این منظور نمونههای گیاهی از زیستگاههای مختلف منطقه در طی سه فصل رویشی بهار، تابستان و پاییز سال 1383 جمعآوری و سپس با استفاده از فلورهای مختلف شناسایی شدند. شکلهای زیستی گونههای شناسایی شده از این منطقه تعیین و طیف زیستی منطقه ترسیم شد. براساس دادههای بدست آمده از پراکنش جغرافیایی گونهها و منابع موجود، جایگاه منطقه از نظر جغرافیای گیاهی مورد بررسی قرار گرفت. از مجموع 103 گونه گیاهی که متعلق به 86 جنس و 30 تیره میباشد، یک گونه متعلق به بازدانه، 86 گونه نهاندانه دو لپهای و 16 گونه نهاندانه تک لپهای هستند. بیشترین غنای گونهای در تیرههای Asteraceae (4/20 درصد)، Poaceae (6/12 درصد)، Lamiaceae (7/9 درصد)، (7/8 درصد) و Rosaceae (8/7 درصد) دیده میشود. در بین گیاهان منطقه، همیکریپتوفیتها با 40 گونه (8/38 درصد) و تروفیتها با 23 گونه (3/22 درصد) از فراوانترین اشکال زیستی منطقه هستند. پراکنش 71 گونه (9/68 درصد) به ناحیه ایران ـ تورانی منحصر میگردد که از این تعداد 22 گونه (1/28 درصد) اندمیک ایران هستند. در میان گونههای انحصاری ایران، دو گونه Nepeta gloeocephala و Helichrysum davisianumانحصاری یزد میباشند. پرونده مقاله -
دسترسی آزاد مقاله
274 - بررسی فلورستیک، شکل زیستی و ناحیه رویشی گیاهان دارویی منطقه درکش در استان خراسان شمالی
مرجانه آیدانی فرخ قهرمانینژاد رمضانعلی خاورینژاد محمدرضا جوهرچیمنطقه قرق درکش در مختصات جغرافیایی '49 - ْْ56 و '41 - ْ56 طول شرقی و '27- ْآْ37 و '24- ْ37 عرض شمالی واقع شده است و از نظر موقعیت مکانی در شمال شرق ایران و در غرب بجنورد، به فاصله 75 کیلومتری از آن قرار دارد. مساحت این ناحیه کوهستانی که بخشی از ارتفاعات آلاداغ میباشد چکیده کاملمنطقه قرق درکش در مختصات جغرافیایی '49 - ْْ56 و '41 - ْ56 طول شرقی و '27- ْآْ37 و '24- ْ37 عرض شمالی واقع شده است و از نظر موقعیت مکانی در شمال شرق ایران و در غرب بجنورد، به فاصله 75 کیلومتری از آن قرار دارد. مساحت این ناحیه کوهستانی که بخشی از ارتفاعات آلاداغ میباشد، 4000 هکتار است حداقل ارتفاع از سطح دریا 1000 متر و حداکثر ارتفاع آن 2455 متر است. در این تحقیق فلور منطقه برای اولین بار مورد بررسی قرار گرفت و در مجموع تعداد 506 گونه متعلق به 310 جنس و 76 تیره گیاهی شناسایی شد که از بین آنها بیش از 140 گونه با ارزش دارویی تشخیص داده شد که به 116 جنس و 39 تیره گیاهی تعلق دارند. در بین تیرههای شناسایی شده، تیره نعناعیان (Lamiaceae) با 26 گونه، کاسنی (Asteraceae) با 21 گونه و تیره گل سرخ (Rosaceae) با 13 گونه به ترتیب دارای بیشترین تعداد گونه دارویی هستند. مطالعه طیف شکل زیستی گیاهان دارویی منطقه نشان میدهد که همی کریپتوفیتها، تروفیتها و ژئوفیتها به ترتیب با 40، 4/18 و 25/14 درصد بیشترین شکل زیستی را دارا هستند. از نظر فیتوجغرافیایی نیز گونههای دارویی متعلق به نواحی رویشی ایران ـ تورانی، اروپا ـ سیبری (هیرکانی و اکسینوهیرکانی) و مدیترانهای هستند. پرونده مقاله -
دسترسی آزاد مقاله
275 - معرفی فلور و شکل زیستی و پراکنش جغرافیایی گیاهان معدن آهن ده زمان در شهرستان بردسکن (استان خراسان رضوی)
محمدرضا جوهرچی مه لقا قربانلی فاطمه اسداللهیدر این تحقیق فلور منطقه معدن آهن ده زمان در شهرستان بردسکن مورد بررسی قرار گرفته است. روش جمع آوری گیاهان منطقه مذکور روش مرسوم مطالعات تاکسونومیک بوده است. نمونه های جمع آوری شده براساس روشهای مرسوم تاکسونومی گیاهی و به کارگیری منابع لازم شناسایی شدو خانواد ه،جنس و گو چکیده کاملدر این تحقیق فلور منطقه معدن آهن ده زمان در شهرستان بردسکن مورد بررسی قرار گرفته است. روش جمع آوری گیاهان منطقه مذکور روش مرسوم مطالعات تاکسونومیک بوده است. نمونه های جمع آوری شده براساس روشهای مرسوم تاکسونومی گیاهی و به کارگیری منابع لازم شناسایی شدو خانواد ه،جنس و گونه هریک از آنها تعیین گردید. اسامی تاکسونهای منطقه به صورت فهرست الفبایی و به ترتیب خانواده و نام علمی تنظیم شد. نمونه های جمع آوری شده در این بررسی به هرباریوم پژوهشکده علوم گیاهی دانشگاه فردوسی مشهد منتقل و در آنجا با استفاده از فلورهای معتبر شناسایی شد.شکل زیستی هریک ازعناصرگیاهی منطقه بااستفاده ازروش رانکیر (Raunkiaer) مشخص شد. این بررسی نشان داد که در منطقه معدن آهن 29 خانواده و75 جنس و 95 گونه گیاهی وجود دارد که بیشترین گونهها در تیره Asteraceae (12گونه) میباشد. همچنین اشکال زیستی گیاهان منطقه معدن آهن شامل 68.42% تروفیت،12.63% همیکریپتوفیت، 8.42%، ژئوفیت، 5.26% کامفیت و 5.26% فانروفیت میباشد. پرونده مقاله -
دسترسی آزاد مقاله
276 - بررسی کالوسزایی و اندامزایی گیاه اسطوخودوس ((Lavandula vera DC.
مریم پیوندی لیلا کاظمی احمد مجداسطوخودوس گیاهی زینتی و داروئی است. یکی از روشهای کارامد در ریز ازدیادی آن اندامزائی از کالوس میباشد. در این پژوهش تاثیر سیتوکینینهای مختلف بر کالوسزائی و اندامزائی گیاه اسطوخودوس مطالعه شد. جداکشتهای گره، در محیط کشت MS دارای غلظتهای مختلف هورمونهای BAP (بنزیل آم چکیده کاملاسطوخودوس گیاهی زینتی و داروئی است. یکی از روشهای کارامد در ریز ازدیادی آن اندامزائی از کالوس میباشد. در این پژوهش تاثیر سیتوکینینهای مختلف بر کالوسزائی و اندامزائی گیاه اسطوخودوس مطالعه شد. جداکشتهای گره، در محیط کشت MS دارای غلظتهای مختلف هورمونهای BAP (بنزیل آمینو پورین)، Kin (کینتین) و 2iP (2- ایزوپنتیل آدنین) با غلظتهای 1 تا 2 میلیگرم بر لیتر، به تنهائی و یا در ترکیب با یکدیگر کشت شدند. نتایج نشان داد ده روز پس از کشت نمونه ها،کالوس زائی آغاز میشود. در هفته سوم روی برخی از کالوسهای سبز رنگ گرانولهائی ایجاد شده که با گذشت زمان به جوانه و برگ یا ریشه تبدیل شدند. جوانهزنی از کالوسها در محیطهای کشت دارای BAP یا 2ip مشاهده شد. بیشترین جوانهزنی در محیط دارای BAP (2 میلیگرم بر لیتر) به دست آمد. در تیمارهای BAP (1 تا 2 میلیگرم بر لیتر) و 2ip (1 میلی گرم بر لیتر) همزمان با جوانهزنی، ریشه زایی نیز صورت پذیرفت، به طوریکه حداکثر تعداد ریشه در محیط کشت دارای BAP (1 میلیگرم بر لیتر) مشاهده شد. در مرحله بعد، کالوسهای 45 روزه در همان محیط کشت اولیه واکشت شدند. نتایج این مرحله نشان داد نمونهها علاوه بر محیطهای واکشت دارای BAP یا 2iP، در محیط کشت دارای دو هورمون Kin و BAP(1 میلیگرم بر لیتر) نیز ساقه و برگ تولید مینمایند. اما در هیچکدام از محیطهای واکشت ریشه زائی دیده نشد. پرونده مقاله -
دسترسی آزاد مقاله
277 - Utility of Gold Nanoparticles for Spectrofluorimetric and Spectrophotometric Determination of Ceftobiprole in Dosage form and Biological Fluids
Hesham Salem Mahmoud Omar Dina Zein Deena MokhaterTwo simple, fast and novel delicate fluorimetric and spectrophotometric strategies were examined for the measure of ceftobiprole (CEF) utilizing gold nanoparticles (Au NPs). On spectrofluorimetric strategy, gold nanoparticles were utilized as a fluorescence test. The ex چکیده کاملTwo simple, fast and novel delicate fluorimetric and spectrophotometric strategies were examined for the measure of ceftobiprole (CEF) utilizing gold nanoparticles (Au NPs). On spectrofluorimetric strategy, gold nanoparticles were utilized as a fluorescence test. The expansion of CEF to Au-NPs arrangement caused significant quenching of the outflow band of Au-NPs, which was likely due to the complexation of the medicate to gold NPs. Beneath the ideal conditions, the extinguished fluorescence (FL) escalated was straight with the examined concentration. The extinguishing instrument of CEF on the outflow band of Au-NPs was clarified by Stern-Volmer law. The moment spectrophotometric strategy was based on conglomeration of synthesized gold nanoparticles. Gold nanoparticles appeared retention at 522 nm. Upon interaction with the CEF, the band at 522 nm vanished with arrangement of a unused ruddy moved band at 673. Distinctive exploratory variables were optimized for higher affectability. The calibration bands were straight with concentration extend of 0.1-12 µg/mL for the examined medicate. The methods were connected effectively to decide the studiedddrug in minor concentrations in immaculate frame, pharmaceutical measurement shapes and organic liquids (human serum and urine samples). پرونده مقاله -
دسترسی آزاد مقاله
278 - The Effect of Hedged-form Feedback vs. Uncoded Feedback on Grammatical Accuracy of Iranian Intermediate EFL Learners
Mahvan Ebrahimzade Mohammad Reza KhodarezaAbstract The extent to which teachers’ written corrective feedback (WCF) is conducive to ESL learners’ improvement has been discussed since Truscott’s claim in 1996. The mentioned debate continues because there has been lots of contrastive research stu چکیده کاملAbstract The extent to which teachers’ written corrective feedback (WCF) is conducive to ESL learners’ improvement has been discussed since Truscott’s claim in 1996. The mentioned debate continues because there has been lots of contrastive research studies with different results. This paper presents the results of a 2-month study of the effectiveness of WCF to 65 low intermediate Iranian learners. In the first phase, the students were divided into two groups of hedged group and control group, which received uncoded feedback. The learners produced 8 pieces of writing (Nelson Test was given to students to homogenize the groups). The first piece of writing was considered as the pretest and the 8th piece of their writing was considered as their posttest. Independent and paired sample t test were used to analyse the data statistically. The result of comparing the mean performance of the two groups in posttest indicated that the probability value was less than .05 (p = .000 < .05) which means that the mean performance of the two sets of scores in post test is significantly different and the hedged form feedback group has outperformed the one who received uncoded feedback. پرونده مقاله -
دسترسی آزاد مقاله
279 - The Effect of Explicit Instruction of Formulaic Sequences on Oral Proficiency Improvement of Young Iranian EFL Students
Yousef Bakhshizadeh Masoud Rahimi Domakani Maryam RajaeiAbstract This study aimed to shed light on young Iranian EFL students’ oral proficiency improvement through explicit instruction of formulaic sequences (FSs). This pretest-posttest quasi experimental study was conducted in a bilingual school in Shahrekord, Iran. A چکیده کاملAbstract This study aimed to shed light on young Iranian EFL students’ oral proficiency improvement through explicit instruction of formulaic sequences (FSs). This pretest-posttest quasi experimental study was conducted in a bilingual school in Shahrekord, Iran. Accordingly, based on ACTFL OPI test, two groups of low intermediate students with age range of 11 to 12 were chosen to be assigned as control and experimental groups. The control group with 20 participants continued its regular instruction focusing on analytic grammar rules and discrete vocabulary, while the experimental group with 40 participants received explicit FSs-based instruction through readings, by adopting a teaching procedure inspired by Lewis’ prescribed strategies for lexicon instruction. After 24 sessions of instruction, the participants were interviewed again, and their oral performance was recorded and transcribed to be scored by two experienced judges. Subsequently, ANOVA results revealed the significant oral proficiency improvement of experimental group in comparison to the control group, pointing to the effectiveness of FSs instruction. پرونده مقاله -
دسترسی آزاد مقاله
280 - Effects of Textually-Enhanced Reading Tasks and Strategic Pre-Task Planning on Learning English Passive Voice
Ali ShafaeiIn the realm of second language acquisition (SLA), task-based language teaching (TBLT) and input enhancement (IE) have been the focus of a great number of studies. However, the idea of investigating the effects of focus on form instruction through input-enhanced tasks a چکیده کاملIn the realm of second language acquisition (SLA), task-based language teaching (TBLT) and input enhancement (IE) have been the focus of a great number of studies. However, the idea of investigating the effects of focus on form instruction through input-enhanced tasks along with pre-task planning time as one of the features of task-based language teaching has been rarely explored in the field of SLA. Therefore, the current research set out to examine the impacts of focus on form instruction via textually-enhanced reading tasks along with strategic pre-task planning on L2 learners’ grammatical development in terms of learning English passive voice. For the purpose of the study, 60 intermediate learners of English were selected and divided into two groups of thirty namely as enhanced and unenhanced. Then, each group was divided into two sub-groups of fifteen as +planning and -planning. The participants were provided with a pretest prior to the treatment, then, they were instructed via the materials chosen for the purpose of the study for ten sessions and at the end they were provided with the posttest of the study. Their performance on the pretest and posttest were analyzed to find out the possible effects of the instruction provided throughout the treatment phase. The results revealed that learners who were exposed to enhanced reading tasks along with strategic pre-task planning time outperformed the other learners. The findings of the present study can be of use for language teachers, syllabus designers, and task designers. پرونده مقاله -
دسترسی آزاد مقاله
281 - Effect of Interventionist Computerized Dynamic Assessment on Learners’ Grammatical English Tenses: Analysis of Cake and Sandwich Formats
Alireza Mohammad beigi Seyed Reza Basirloo* akbar molaei saeed yazdaniThe present mixed-method study sought to investigate the efficacy of using an interventionist dynamic assessment and specifically its formats namely the cake and the sandwich ones on learners’ grammatical English Tenses. In doing so, 45 advanced learners of Englis چکیده کاملThe present mixed-method study sought to investigate the efficacy of using an interventionist dynamic assessment and specifically its formats namely the cake and the sandwich ones on learners’ grammatical English Tenses. In doing so, 45 advanced learners of English language at Iran Language Institute (ILI) in Shiraz, Iran were selected. They were randomly assigned to 3 groups, each including 15 participants. Two experimental groups namely the cake and the sandwich ones received the interventionist dynamic assessment test while the third group received a non-dynamic grammar test which was functioning as a control group. As the study utilized a sequential exploratory design (QUAN → qual) of mixed method approach (MMR), the quantitative part was carried out via a well-established grammar test and in the qualitative component, six informants (3 from the cake group and 3 from the sandwich group) were selected to be interviewed and their quotations were descriptively analyzed through a sociocultural perspective. The quantitative component of the study revealed the outperformance of the two experimental group over the control group. However, the two modes of delivering mediation in experimental groups had no statistically significant difference on the degree of the acquisition of grammatical English tenses by learners. The interview analysis of the negotiations also demonstrated positive viewpoints of learners about the two experimental groups. Merging the quantitative and qualitative analyses, the study found that interventionist dynamic assessment, in both modes, could have positive effects on learners’ ability to improve their acquisition of English tenses. پرونده مقاله -
دسترسی آزاد مقاله
282 - Collaborative Planned Form-focused Activities Vs Collaborative Incidental Form-focused Activities: Elementary EFL learners' grammar learning in focus
Mehrdad Eskandari Sedigheh AbbasnasabAbstract This study was an attempt to investigate the effect of collaborative form-focused activities on grammar learning of elementary EFL learners. To this end, 58 adult male Iranian EFL learners at elementary level of proficiency in three classes of language institut چکیده کاملAbstract This study was an attempt to investigate the effect of collaborative form-focused activities on grammar learning of elementary EFL learners. To this end, 58 adult male Iranian EFL learners at elementary level of proficiency in three classes of language institutes were chosen. They formed the three groups of the study. The grammar section of Cambridge Michigan Placement test was used to ensure the homogeneity of the groups. Then, a grammar pre-test was administered to all groups to ensure that the participants were unfamiliar with the target grammatical items (irregular past tense of the verbs). At this stage, the treatment started and while one experimental group received collaborative planned form-focused activities, the other experimental group received collaborative incidental form-focused activities. The control group underwent regular classroom patterns and methods. After the treatment sessions, all the groups took a grammar post-test and their knowledge of the target irregular past tense was checked. Finally, SPSS software was used to run t-test. The results revealed that there was a significant difference between the three groups regarding grammar learning, and that the group who experienced collaborative planned form-focused activities outperformed the other two groups. پرونده مقاله -
دسترسی آزاد مقاله
283 - Effects of Form-focused, Meaning-focused, and Forms-focused Instruction on Iranian Intermediate EFL Learners' Development of Collocations
Nasrin Dehghan Sayyed Omid TabatabaeiThe current study was an attempt to investigate the effect of performing Focus on Form (FoF), Focus on Meaning (FoM), and Focus on Forms (FoFs) instructions on the development of collocational knowledge among Iranian intermediate EFL learners, and to explore any signifi چکیده کاملThe current study was an attempt to investigate the effect of performing Focus on Form (FoF), Focus on Meaning (FoM), and Focus on Forms (FoFs) instructions on the development of collocational knowledge among Iranian intermediate EFL learners, and to explore any significant difference on the achievement of the participants' collocational knowledge among three groups. In so doing, 107 female intermediate EFL learners were selected for this research. They all took the Nelson proficiency test and 90 students who had gotten the higher scores were randomly divided into three groups of FoF, FoM, and FoFs. Before the treatment they were pretested and the results of the three groups did not have any significant difference, thus all of the learners were at the same level of knowledge. After the treatment, they were posttested and their scores in FoM group were considerably higher than the learner' scores in FoF and FoFs groups but the learners' scores in FoF and FoFs groups did not have any significant difference with each other. The findings of this study offer beneficial implications for EFL teachers, learners, and materials developers which are finally discussed. پرونده مقاله -
دسترسی آزاد مقاله
284 - Effects of Line Defect on Electronic Transport of Double Gate Armchair Graphene Nanoribbon Field Effect Transistors: a Simulation Study
Mohammad Bagher Nasrollahnejad Parviz Keshavarzi‎Defect engineering in nonmaterials could be used to modify the properties of materials for various practical applications. In this paper, the impact of linear arrangement of ISTW (LA-ISTW) defect and its position on the transport properties of grapheme nanoribbon transi چکیده کاملDefect engineering in nonmaterials could be used to modify the properties of materials for various practical applications. In this paper, the impact of linear arrangement of ISTW (LA-ISTW) defect and its position on the transport properties of grapheme nanoribbon transistors is investigated. The analysis show that creating the LA-ISTW defect with a certain density in the proper position of the channel length leads to increase the bandgap, suppress ambipolar conduction and provides the higher on-off current ratio and therefore the structure with LA-ISTW defect in the proper defect position and the specified defect density has better performance than conventional structure. The results have also demonstrated the defect engineering potential on modifying the electronic transport properties of GNR FETs. Simulations has been done based on self-consistent solution of full 3D Poisson and Schrodinger equations within the non-equilibrium Green’s function formalism. Graphene nanoribbons with non-passivated edges are used in the transistor channel. پرونده مقاله -
دسترسی آزاد مقاله
285 - مدل ادوار تجاری حقیقی با شکلگیری عادات: راه حلی برای معمای صرف سهام
سید فخرالدین فخر حسینیدر ادبیات اقتصادی، شکلگیری عادات در بازتولید برخی از اطلاعات مالی تاریخی موفق بوده است و میتواند مشکلات مربوط به شبیهسازی متغیرهای بازارهای مالی و ادوار تجاری را آسانتر کند. هدف این مقاله بررسی عملکرد شکلگیری عادات با جداییناپذیری بین مصرف و فراغت میباشد. دادهها چکیده کاملدر ادبیات اقتصادی، شکلگیری عادات در بازتولید برخی از اطلاعات مالی تاریخی موفق بوده است و میتواند مشکلات مربوط به شبیهسازی متغیرهای بازارهای مالی و ادوار تجاری را آسانتر کند. هدف این مقاله بررسی عملکرد شکلگیری عادات با جداییناپذیری بین مصرف و فراغت میباشد. دادههای مورد استفاده در این مقاله مربوط به قیمتهای ثابت 1383 بوده و به طور سالانه برای دوره زمانی 1345-93 میباشند. بر این اساس، پس از لگاریتمگیری از متغیرها با استفاده از فیلتر هدریک- پرسکات، متغیرها روندزدایی شدند. معادلات نهایی الگو، پیرامون وضعیت باثبات خطی شده و با استفاده از رهیافت اُهلیگ (1999) معادلات تصادفی خطی شده، به صورت یک الگوی فضا- حالت در محیط برنامهنویسی Matlab تصریح شد. نتایج نشان میدهد افزودن پارامتر شکلگیری عادات میتواند نسبت شارپ یا نوسانات دارایی بدون ریسک را افزایش دهد و جداناپذیری بین مصرف و فراغت، میتواند معمای صرف سهام را تبیین نماید. پرونده مقاله -
دسترسی آزاد مقاله
286 - مقایسۀ وجه فعل در گویشهای «کُردی فیلی» و «کُردی کَلهُری» از گویشهای کردی جنوبی
سکینه آزادیزبان کردی، زبان میلیونها نفر از ساکنان زمین است. کرمانجی، سورانی (کرمانجی جنوبی)، اَورامی- گورانی و کردی جنوبی، گویشهای اصلی زبان کردی هستند که زیرگویشها و لهجههای متعددی دارند. کردی جنوبی، گویش مناطق کرمانشاه و ایلام است که در بخش کرمانشاهی، گویشهایی همچون کلهری، چکیده کاملزبان کردی، زبان میلیونها نفر از ساکنان زمین است. کرمانجی، سورانی (کرمانجی جنوبی)، اَورامی- گورانی و کردی جنوبی، گویشهای اصلی زبان کردی هستند که زیرگویشها و لهجههای متعددی دارند. کردی جنوبی، گویش مناطق کرمانشاه و ایلام است که در بخش کرمانشاهی، گویشهایی همچون کلهری، جافی، اورامی و غیره دارد و کردی ایلامی (کردی فیلی)، زبان رایج ساکنان استان ایلام و مناطقی از کشور عراق مانند مَندَلی و خانقین است. کَلهُری، خِزِلی، اَرکَوازی، مَلِکشاهی و غیره، سایر گویشهای ساکنان استان ایلام را شکل میدهد. در پژوهش حاضر با هدف کشف و شناسایی گوشهای از قواعد دستوری گویشهای کردی جنوبی، وجه فعل در دو گویش کلهری و فیلی (ایلامی) به شیوۀ توصیفی _ تحلیلی، بررسی و مقایسه شده است. حاصل این پژوهش نشان میدهد که در قواعد دستوری این گویشها به علّت خویشاوندی، شباهتهای بسیار و در عین حال، تمایزهایی وجود دارد و عمدۀ این تمایزها در شناسهها و هنگام صرف افعال، در صیغههای دوم شخص مفرد و سوم شخص مفرد خود را نشان میدهد. پرونده مقاله -
دسترسی آزاد مقاله
287 - بررسی و توصیف زبان شناختی 105 صورت زبانی گویش لری در بخش مرکزی شهرستان رستم
محمد هادی فلاحی یزدان دشتیانشهرستان رستم یکی از شهرستان های استان فارس است. به استثنای دو روستای این شهرستان، گویش بقیۀ مردم شهرستان، لری است. تعداد روستاهای مورد تحقیق، ۵۹ روستا است. روش تحقیق در این پژوهش، ترکیبی از روش های میدانی و توصیفی بوده است و مواد زبانی با روش گردآوری هدایت شده، جمع آو چکیده کاملشهرستان رستم یکی از شهرستان های استان فارس است. به استثنای دو روستای این شهرستان، گویش بقیۀ مردم شهرستان، لری است. تعداد روستاهای مورد تحقیق، ۵۹ روستا است. روش تحقیق در این پژوهش، ترکیبی از روش های میدانی و توصیفی بوده است و مواد زبانی با روش گردآوری هدایت شده، جمع آوری شده اند. پرسش نامۀ این پژوهش بر اساس طرح ملی اطلس زبانی بوده است که شامل ۱۰۵ واژه و عبارت و ۳۶ جمله است. داده ها، پس از انجام مصاحبه با استفاده از الفبای آوانگار بین المللی، آوانگاری شدند. برخی از واژه های این گویش به طور کامل با فارسی معیار متفاوت هستند، برخی تنها تفاوت تلفظی دارند و برخی نیز کاملاً یکسان هستند. در این گویش، پنج نوع هجا وجود دارد که عبارتند از: cv، cvc، cvcc، ccv، ccvc. همچنین، در این گویش، کشش واکه ای در مواردی باعث تمایز معنایی می شود. ترتیب صفت و موصوف و مضاف و مضافٌ الیه، همانند فارسی معیار است، با این تفاوت که در مواردی، [e] اضافه حذف می شود. نشانۀ جمع در این گویش، [-æl] است که به پایان اسامی افزوده می شود. نشانۀ معرفه نیز /-æku/ و /-ku/ است که به آخر اسم معرفه اضافه می شود. پرونده مقاله -
دسترسی آزاد مقاله
288 - مهمترین ویژگیهای تصریفی اسم و فعل در لهجه بواناتی (بخش مرکزی)
جلال رحیمیان فاطمه کامگارهدف از نگارش این مقاله توصیف ویژگیهای تصریفی اسم و فعل در گویش بواناتی (بخش مرکزی شهرستان بوانات) است. پژوهش حاضر که نخستین بررسی نظاممند درباه گویش بواناتی است با روش توصیفی (میدانی) و کتابخانهای انجام شده است. ما در این پژوهش، مقولههای مورد نظر را از دو جنبه ساختا چکیده کاملهدف از نگارش این مقاله توصیف ویژگیهای تصریفی اسم و فعل در گویش بواناتی (بخش مرکزی شهرستان بوانات) است. پژوهش حاضر که نخستین بررسی نظاممند درباه گویش بواناتی است با روش توصیفی (میدانی) و کتابخانهای انجام شده است. ما در این پژوهش، مقولههای مورد نظر را از دو جنبه ساختار و معنا مورد بررسی و تحلیل قرار دادهایم. از جمله یافتههای پژوهش میتوان به نشانه جمع /ǎ/ در این گویش اشاره کرد که بنا به ماهیت در جایگاههای مشخصی، گاهی گویشوران را ناچار به استفاده از واجهای میانجی میسازد تا از التقای واکهها پرهیز شود. یک به عنوان نشانه اسم نکره در فارسی معیار، به شکل jej در این گویش ظاهر میشود. در قریب به اتفاق موارد کسره اضافه در این گویش حذف میشود که جزئیات آن در متن تحقیق بیان شده است. ضمایر ملکی در این گویش نیز از نظر ساختاری شکلی منحصر به فرد دارند که مشابه آن در فارسی معیار دیده نمیشوند. در بخش افعال، برخی از افزونههای شخص و عدد از قبیل شناسه دوم شخص جمع بنام /-ik/ مختص این گویش است و در فارسی معیار به کار نمیرود. در صورتهای فعلی منفی، پیشوند می به م کاهش مییابد و صورتی چون نمیروم به نمرم /næ-m-r-æm/ تبدیل میشود. طی این پژوهش به یافتههای دیگری نیز رسیدیم که شرح آن ها در متن تحقیق آمده است. پرونده مقاله -
دسترسی آزاد مقاله
289 - Numerical Study of Effective Parameters in the Deep Drawing Process of a Cylindrical Cup and Comparison with Experimental Results
Hamidreza Gharehchahi Mohammad Javad Kazemzadeh-Parsi Ahmad Afsari Mehrdad MohammadiToday, metal forming is considered one of the essential methods of manufacturing and producing parts. Therefore, the more accurate knowledge of it leads the industrialists to produce higher quality parts. Deep drawing is one of the most important methods in metal formin چکیده کاملToday, metal forming is considered one of the essential methods of manufacturing and producing parts. Therefore, the more accurate knowledge of it leads the industrialists to produce higher quality parts. Deep drawing is one of the most important methods in metal forming processes used to produce cup-shaped products. In this paper, numerical simulation of the deep drawing process based on the finite element method is performed using Abaqus software for a cylindrical cup. Then, the results obtained from numerical simulation are compared with the experimental results in the sources, and the validation of the simulation is performed. In the deep drawing process, effective parameters such as circumferential strain distribution, thickness strain distribution, and radial force distribution are extracted from numerical simulations and compared with experimental results in the sources. The effect of friction coefficient, blank holder force, and punch radius on the deep drawing process has also been investigated. Because experimental methods based on trial and error are time-consuming and costly to achieve the shape of the primary blank, researchers use numerical methods to simulate and design metal sheet forming processes such as deep drawing. It is necessary to compare the results with experimental works to validate the simulations performed by numerical methods. پرونده مقاله -
دسترسی آزاد مقاله
290 - Investigation of Mass Magnetic Abrasive Finishing Process on Compressor Blades
Seyed Alireza Rasouli Davood NoriAttempts at research across various industries to achieve high-quality surfaces have led to the development of new finishing processes. Magnetic Abrasive Finishing is a novel technique where a magnetic field is employed to control an abrasive tool. Gas turbine compresso چکیده کاملAttempts at research across various industries to achieve high-quality surfaces have led to the development of new finishing processes. Magnetic Abrasive Finishing is a novel technique where a magnetic field is employed to control an abrasive tool. Gas turbine compressor blades are among the industrial components requiring high surface quality due to their exposed surfaces. The reduction in surface roughness on these components has a significant impact on the efficiency of motor turbines. This paper focuses on studying the Magnetic Abrasive Finishing process parameters for the free surfaces of Titanium blades. Using a mass Magnetic Abrasive Finishing machine, the influence of powder weight, type of abrasive particles, and gap on the variation of surface roughness is investigated through statistical methods such as the response surface. The fabrication of the machine and determination of magnet polarity are carried out using Maxwell simulation software. The Factorial method is employed for experiment configuration. Mechanically alloyed powders produced by ball mills are used in this study. Results demonstrate that employing the magnetic abrasive method can reduce the surface roughness of the blade by up to 33%. The empirical model derived from regression analysis is utilized to predict the variation in surface roughness. Variance analysis of the experimental results indicates the significance of all studied parameters. Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) are employed for a qualitative evaluation of the results. پرونده مقاله -
دسترسی آزاد مقاله
291 - Survey and Study of Machinability for Titanium Alloy Ti-6Al-4V through Chip Formation in Milling Process
Hassan Gheisari Ebrahim KaramianMost of the materials used in the industry of aero-engine components generally consist of titanium alloys. Advanced materials, because of their excellent combination of high specific strength, light weight and general corrosion resistance. In fact, chemical wear resista چکیده کاملMost of the materials used in the industry of aero-engine components generally consist of titanium alloys. Advanced materials, because of their excellent combination of high specific strength, light weight and general corrosion resistance. In fact, chemical wear resistance of aero-engine alloy provides a serious challenge for cutting tool material during the machining process. The reduction in cutting temperature distributions leads to an increase in tool life and a decrease in wear rate. Hence, the chip morphology and segmentation play a predominant role in determining machinability and tool wear during the machining process. The result of low thermal conductivity and diffusivity of this alloy is in the concentration of high temperatures at the tool-work-piece and tool-chip interface. Consequently, the chip morphology is very important in the study of machinability of metals as well as the study of cutting tool wear. Otherwise, the result will be accelerating tool wear, increasing manufacturing cost and time consuming. پرونده مقاله -
دسترسی آزاد مقاله
292 - Investigation of Springback Angle in Single Point Incremental Forming Process on Explosive Welded Cu/St/Cu Multilaye
Mohammad Honarpisheh Mohammad Reza Ebrahimi Hadi MansouriNowadays, the role of light weight materials has grown up in important industries such as aerospace and biomechanics, but before the appliance, their strength should be increased. A modern way to increase this factor along with the lightweight factoris using bimetal she چکیده کاملNowadays, the role of light weight materials has grown up in important industries such as aerospace and biomechanics, but before the appliance, their strength should be increased. A modern way to increase this factor along with the lightweight factoris using bimetal sheets, hence, the design of multilayer sheets has been very much considered recently. In this study, explosive welded Cu/St/Cu multilayer sheets were used in the incremental forming process to determine the springback phenomenon on different layers. The results indicated that rotational speed, feeding rate, and vertical step parameters can affect spring back in single point incremental forming process (SPIF).Three levels of vertical step size, tool rotational speed, and feed rate have been considered as the input process parameters and spring back as the output.In order to design a better experiment and analyze the data, the Taguchi method was selected on the basis of DOEin Mini-Tab software andthe results have been analyzed by two states. In the first state,the value which was closest to the nominal value is considered to be the optimal result which obtained for spring back angles with parameters of 0.75 mm for the vertical step down, 200 rpm for the rotational speed and 500 and 1000 mm/min for the feeding rate. In the second state, the least amount is considered as the optimal result in which the values of 0.5 and 1 mm of the vertical step down, 150 and 100 rpm of the rotational speed, and 1500 and 500 mm/min of the feeding rate formed the optimal outcome. پرونده مقاله -
دسترسی آزاد مقاله
293 - Analytical and Numerical Investigation of Significant Parameters on Strength of Electromagnetically Assembled Products Joints
Mehdi Zohour Bahman GhorbaniElectromagnetic forming is a high energy rate forming process. In this process, an electromagnetic Lorentz body force is used for deformation of products. In this article, Electromagnetic forming process was simulated for assembly of parts as an innovative method. In th چکیده کاملElectromagnetic forming is a high energy rate forming process. In this process, an electromagnetic Lorentz body force is used for deformation of products. In this article, Electromagnetic forming process was simulated for assembly of parts as an innovative method. In this research work, the effect of important parameters of process such as discharge energy, radius and width of rectangular groove on the strength of assembled products were studied by using finite element technique and design of experiment. After introducing the governing equations, the output of these equations were applied in simulation as a pressure on work-piece. In this simulation, an axisymmetric model was used in analysis and Johnson-Cook theory was applied due to high strain rate to show the plastic behavior of materials. Finally, the numerical results were compared with the experimental results reported by other researchers and found a good correlation between them. As a result, the bead depth increases with the increase of the discharge energy and more filling groove, increasing strength of joint. In addition, Strength of joint increases, due to create partial shearing of the tube at the groove edge and interference stresses at the tube and mandrel interface. پرونده مقاله -
دسترسی آزاد مقاله
294 - Analytical and Numerical Investigation of Significant Parameters on Strength of Electromagnetically Assembled Aluminum Tube Joints
Mehdi Zohoor Bahman GhorbaniElectromagnetic forming is a high energy rate forming process in which an electromagnetic Lorentz body force is used for deformation of products. In this article, electromagnetic forming process was simulated for the assembly of parts as an innovative method. The effect چکیده کاملElectromagnetic forming is a high energy rate forming process in which an electromagnetic Lorentz body force is used for deformation of products. In this article, electromagnetic forming process was simulated for the assembly of parts as an innovative method. The effect of important process parameters such as discharge energy, radius and width of rectangular groove on the strength of the assembled products were studied by using finite element technique and design of experiment. After introducing the governing equations, the output of these equations were applied in simulation as a pressure on work-piece. In this simulation, an ax symmetric model was used in analysis and Johnson-Cook theory was applied due to high strain rate to show the plastic behavior of the materials. Finally, the numerical results were compared with the experimental ones reported by other researchers and a good correlation was found between them. Results revealed that the bead depth increases with the increase of the discharge energy and more filling groove, increasing strength of joint. Also Strength of joint increases due to the creation of partial shearing of the tube at the groove edge and interference stresses at the tube and mandrel interface. پرونده مقاله -
دسترسی آزاد مقاله
295 - A Study on the Forming of Sheet Metal Parts Using Multi-Point Forming Technology
Vahid Rikhtehgar Nezami Behrooz Zareh Abbas Vafaee SefatIn recent years, in order to reducing die design and manufacturing costs, Multi point forming technique has gained an increasing interest because of its high flexibility. In this process, the conventional fixed shape solid die sets are replaced with a pair of opposite m چکیده کاملIn recent years, in order to reducing die design and manufacturing costs, Multi point forming technique has gained an increasing interest because of its high flexibility. In this process, the conventional fixed shape solid die sets are replaced with a pair of opposite matrices of controllable elements. In this paper, the fundamental principles of multi-point forming was described and the possibility of forming the one sheet metal part by this technique was investigated experimentally and analyzed using finite element simulation. Wrinkles and dimples are the most typical defects in multi-point forming of sheet metal. By the proper selection of process parameters the sound cup with good surface quality and uniform thickness distribution can be formed. The results obtained demonstrated that multi-point forming technology can be used as an effective and economic tool to the forming of single parts with different shapes and is cost-effective. پرونده مقاله -
دسترسی آزاد مقاله
296 - Scheduling Problem of Virtual Cellular Manufacturing Systems (VCMS); Using Simulated Annealing and Genetic Algorithm based Heuristics
Saeed Taouji Hassanpour Reza Bashirzadeh Abolfazl Adressi Behnam BahmankhahIn this paper, we present a simulated annealing (SA) and a genetic algorithm (GA) based on heuristics for scheduling problem of jobs in virtual cellular manufacturing systems. A virtual manufacturing cell (VMC) is a group of resources that is dedicated to the manufactur چکیده کاملIn this paper, we present a simulated annealing (SA) and a genetic algorithm (GA) based on heuristics for scheduling problem of jobs in virtual cellular manufacturing systems. A virtual manufacturing cell (VMC) is a group of resources that is dedicated to the manufacturing of a part family. Although this grouping is not reflected in the physical structure of the manufacturing system, but machines are spread on the shop floor physically. In this paper, there are multiple jobs with different manufacturing processing routes. First, we develop the mathematical model for the problem, and then we present the suggested algorithms. The scheduling objective is weighed tardiness and total travelling distance minimization. The problem is divided into two branches: small scale and large scale. For small scale, the results of GA and SA are compared to GAMS. For large scale problems, due to the time limitation of 3600 seconds, the results of GA and SA are compared to each other. Computational results show that both SA ad GA algorithms perform properly but SA is likely to turn out well in finding better solutions in shorter times especially in large scale problems. پرونده مقاله -
دسترسی آزاد مقاله
297 - بررسی تاثیر قالب های نمایش اطلاعات، توهم بصری و احساسات در تصمیم گیری
منصور گرکز محمدرضا تات محمدرضا عبدلیتصمیمگیری بخش مهم و حیاتی سیستمهای حسابداری و حسابرسی است. توجه قابل ملاحظهای نسبت به متغیرهای مؤثر بر تصمیمات افراد جلب شده است. این متغیرها در طیفی از متغیرهای فیزیولوژیکی تا متغیرهای روان شناختی قرار دارند. از اینرو در این تحقیق، تاثیر قالب نمایش اطلاعات و توهم ب چکیده کاملتصمیمگیری بخش مهم و حیاتی سیستمهای حسابداری و حسابرسی است. توجه قابل ملاحظهای نسبت به متغیرهای مؤثر بر تصمیمات افراد جلب شده است. این متغیرها در طیفی از متغیرهای فیزیولوژیکی تا متغیرهای روان شناختی قرار دارند. از اینرو در این تحقیق، تاثیر قالب نمایش اطلاعات و توهم بصری همچنین تاثیر احساسات مختلف در رفتار تصمیمگیری افراد بررسی شد. این پژوهش، کاربردی از نوع توصیفی و نیمه تجربی میباشد. روش تجزیه و تحلیل اطلاعات تحلیل واریانس و جامعه آماری آن دانشجویان تحصیلات تکمیلی رشته حسابداری میباشند. نتایج این مطالعه نشان میدهد که قالبهای مختلف نمایش اطلاعات در رفتارهای تصمیمگیری افراد تاثیرگذار میباشند، اطلاعات ارائه شده در قالب جدول، با کنار گذاشتن وجود یا عدم وجود مشکلات مکانی که متعلق به خوانندگان اطلاعات مالی هستند، منجر به تصمیمگیری دقیقتری میشوند. همچنین اطلاعات مالی نمایش داده شده در قالب گرافیکهای سه بعدی، بدون خطوط شبکه ایجاد توهم بصری مینمایند و منجر به سوگیری در تصمیم خوانندگان اطلاعات مالی میگردد. همچنین یافتههای این تحقیق نشان میدهد تصمیمگیری دانشجویانی که احساسات معمولی داشتهاند نسبت به دانشجویانی که احساسات غیر معمول (خوشحال/ ناراحت) داشتهاند، کمترتر فرصتطلبانه بوده است. پرونده مقاله -
دسترسی آزاد مقاله
298 - معادله ماتریسی ریکاتی و کاربرد آن در مکانیک سازهها
مهدی نوریدر این مقاله، معادله ی ماتریسی ریکاتی برای حل مسئله ی مقدار ویژه برای ماتریس های متقارن نسبت به هر دو قطر بکار رفته است. برای نیل به این منظور، از تبدیلات متشابه بر روی ماتریس هایی با خواص فوق و همچنین از معادله ی ماتریسی ریکاتی استفاده شده است. روند کار تجزیه ماتریس ها چکیده کاملدر این مقاله، معادله ی ماتریسی ریکاتی برای حل مسئله ی مقدار ویژه برای ماتریس های متقارن نسبت به هر دو قطر بکار رفته است. برای نیل به این منظور، از تبدیلات متشابه بر روی ماتریس هایی با خواص فوق و همچنین از معادله ی ماتریسی ریکاتی استفاده شده است. روند کار تجزیه ماتریس ها به ماتریس هایی با ابعاد کوچک برای محاسبه مقادیر و بردارهای ویژه متناظر می باشد. برای مطالعه کارایی این روش، مثال هایی عددی و سازه ای ارائه شده است. پرونده مقاله -
دسترسی آزاد مقاله
299 - Optimum Selection of Drill Bits for Drilling Operations in Sarvak and Asmari Formations Using a Fuzzy Multiple Criteria Decision-Making Approach
آرش ابراهیم آبادی سیاوش مرادیProper decision making in drilling bit selection issue may contribute to drilling efficiency and considerable cost reduction. Since the bit selection is a Multiple Criteria Decision-Making (MCDM) problem, MCDM techniques are the most powerful approaches to be applied in چکیده کاملProper decision making in drilling bit selection issue may contribute to drilling efficiency and considerable cost reduction. Since the bit selection is a Multiple Criteria Decision-Making (MCDM) problem, MCDM techniques are the most powerful approaches to be applied in such cases. In this study, among MCDM approaches and with respect to great accuracy and validity of results, fuzzy TOPSIS method is utilized for optimum bit selection for drilling operations in Sarvak and Asmari formations in an Iranian oil field. With this regard, three types of bits (i.e. 517, 527 and 537) candidate in Asmari & Sarvak formations are analysed using fuzzy TOPSIS method to rank and prioritize the alternatives, leading to choose the best option. Considering bits operating in Asmari formation, similarity factors for bit types of 517, 527 and 537 bits found to be 0.479, 0.438 and 0.382, respectively indicating bit type 517 can be considered a proper option compared to other ones. Similarly, achieved results from application of fuzzy TOPSIS approach in Sarvak formation shows 0.5405, 0.5019 and 0.5622 values for 517, 527 and 537 bit types respectively, demonstrating the bit type 537 is the most appropriate alternative in Sarvak formation. پرونده مقاله -
دسترسی آزاد مقاله
300 - بررسی الگوی مقاومت آنتیبیوتیکی کرونوباکتر ساکازاکی جدا شده از انواع شیر خشک و غذای کودک
سمیرا عباسی بافطرت محمد گلی حسن ممتازکرونوباکتر ساکازاکی از اصلیترین پاتوژنهای منتقله از شیر خشک و غذای کودک آلوده، به نوزاد است و از عوامل اصلی مرگ و میر، بیماری گوارشی و مننژیت در نوزادان است. بررسی حاضر به تشخیص میکروبیولوژیکی و مولکولی کرونوباکتر ساکازاکی در نمونههای غذای کودک و شیر خشک نوزاد و بررس چکیده کاملکرونوباکتر ساکازاکی از اصلیترین پاتوژنهای منتقله از شیر خشک و غذای کودک آلوده، به نوزاد است و از عوامل اصلی مرگ و میر، بیماری گوارشی و مننژیت در نوزادان است. بررسی حاضر به تشخیص میکروبیولوژیکی و مولکولی کرونوباکتر ساکازاکی در نمونههای غذای کودک و شیر خشک نوزاد و بررسی الگوی مقاومت آنتیبیوتیکی جدایههای باکتریایی پرداخته است. 200 نمونه غذای کودک و شیر خشک از برندهای مختلف جمع آوری و پس از کشت میکروبی، جدایههای باکتری با آزمون PCR مورد تشخیص قرار گرفت. سپس الگوی مقاومت آنتیبیوتیکی ایزولهها با استفاده از روش انتشار دیسک مورد ارزیابی قرار گرفت. 3 نمونه از کل 100 غذای کودک (3 درصد) و 5 نمونه از کل 100 شیر خشک نوزاد (5 درصد) آلوده به کرونوباکتر ساکازاکی بود. برندهای A، B و C از شیر خشک نوزاد و برندهای A و D از غذای کودک آلوده به کرونوباکتر ساکازاکی بودند. برندهای B و C از شیر خشک نوزاد (هر کدام 10 درصد) و برند A از غذای کودک (8 درصد) آلوده به کرونوباکتر ساکازاکی بود. ایزولههای کرونوباکتر ساکازاکی بیشترین حساسیت را به آنتیبیوتیک سیپروفلوکسازین (38/20)، مروپنم (83/19) و ایمیپنم (63/19) و بیشترین مقاومت را به آنتیبیوتیکهای آموکسی سیلین، آمپی سیلین، تیجسیکلین، تیکارسیلین، آزترونام و سفتازیدیم نشان داد. بازرسی دقیق بر کیفیت مواد اولیه شیر خشک و غذای کودک و نظارت دقیق بر روند تولید و رعایت اصول بهداشتی و استفاده از ضد میکروبهای طبیعی از میزان شیوع آلودگی به این باکتری میکاهد. پرونده مقاله -
دسترسی آزاد مقاله
301 - مطالعه آلودگی باکتریهای کلی فرم یخ های تولیدی کارخانجات شهرستان ارومیه
ناهید نویدجوی آناهیتا دهقانی فرشاد بهرامی اصل جعفر قاسمی سیما کریم زداه صادقاهمیت انتقال عوامل بیماریزا ازطریق مصرف یخ کمتر از اهمیت انتقال آن ازطریق آب نمیباشد. آلودگی یخ در اثر استفاده ازآب آلوده، حمل ونقل، توزیع غیربهداشتی ونحوه نامناسب نگهداری آن ایجاد میشود .در این مطالعه توصیفی- مقطعی جهت بررسی وضعیت بهداشتی یخهای کارخانههای ارومیه چکیده کاملاهمیت انتقال عوامل بیماریزا ازطریق مصرف یخ کمتر از اهمیت انتقال آن ازطریق آب نمیباشد. آلودگی یخ در اثر استفاده ازآب آلوده، حمل ونقل، توزیع غیربهداشتی ونحوه نامناسب نگهداری آن ایجاد میشود .در این مطالعه توصیفی- مقطعی جهت بررسی وضعیت بهداشتی یخهای کارخانههای ارومیه و آلودگی باکتریایی آنها، در مجموع 36 نمونه از چهار کارخانه یخسازی در سه نقطهی آب ورودی، فرایند تولید و یخ خروجی به صورت تصادفی در فصل تابستان برداشت گردید. نمونهها از نظر باکتریهای کلیفرمکل و مدفوعی بررسی شدند. وضعیت بهداشتی کارخانجات و نحوه کلرزنی منابع آب از طریق چک لیست ارزیابی گردید. نتایج نشان داد که 50 درصد نمونههای آب خام ورودی به کارخانجات یخسازی و فرایند تولید یخ حاوی کلیفرمکل بیش از حد استاندارد و 67/16 درصد از آنها آلوده به کلیفرم مدفوعی بودندو در یخ خروجی این آلودگی به ترتیب33/58 و 33/8 درصد بود. بررسی وضعیت بهداشتی کارخانجات نشان دادکه 75 درصد کارخانجات از نظر وضعیت ساختمانی و بهداشت فردی،2/56 و 25 درصد به ترتیب از لحاظ ابزارکار و کلرزنی در شرایط مطلوب قرار داشته اما نحوهی نگهداری و انبار تمامی کارخانجات از نظر بهداشتی نامطلوب بودند. نتایج نشان دادند که عدم کلرزنی آب ورودی به کارخانجات یخسازی عامل اصلی آلودگی باکتریایی یخهای تولیدی بوده است. از این رو شرایط بهداشتی یخ شامل بررسی میکروبیولوژیک و نظارت بر چگونگی تولید، توزیع وحمل ونقل آن میبایست توجه دستاندرکاران امور بهداشتی را به خود معطوف سازد. پرونده مقاله -
دسترسی آزاد مقاله
302 - بررسی میزان شیوع و الگوی مقاومت آنتی بیوتیکی باکتری باسیلوس سرئوس در شیرخشک نوزاد و موادغذایی حاوی شیرخشک
بیگم امیدی شیلا صفائیان ناهید رحیمی فرد رضوان رضوان موسوی ندوشن بابک پوراکبریمطالعه حاضر با هدف ارزیابی شیوع و الگوی مقاومت آنتیبیوتیکی باسیلوس سرئوس در بستنی، کیک، پنیر و شیرخشک نوزاد انجام گرفت. بدینمنظور 600 نمونه از مراکز فروش مواد غذایی در شهر تهران تهیه و به آزمایشگاه کنترل کیفی دانشکده دامپزشکی دانشگاه علوم پزشکی تهران منتقل شد و بر روی چکیده کاملمطالعه حاضر با هدف ارزیابی شیوع و الگوی مقاومت آنتیبیوتیکی باسیلوس سرئوس در بستنی، کیک، پنیر و شیرخشک نوزاد انجام گرفت. بدینمنظور 600 نمونه از مراکز فروش مواد غذایی در شهر تهران تهیه و به آزمایشگاه کنترل کیفی دانشکده دامپزشکی دانشگاه علوم پزشکی تهران منتقل شد و بر روی محیط کشت اختصاصی باسیلوس سرئوس، MYP که حاوی مکمل پلیمیکسینبی و زرده تخممرغ بود، کشت داده شد. سپس از کلونیهای صورتیرنگ تشکیل شده، رنگآمیزی گرم و تست کاتالاز انجام شد و حساسیت باکتریهای جدا شده نسبت به آنتیبیوتیکهای آمپی سیلین، پنی سیلین، وانکومایسین، سفازولین، متی سیلین، سفکسیم، سولفامتوکسازول تری متوپریم، کلرامفنیکل، سفپیم و تتراسایکلین براساس روش انتشار دیسک ارزیابی شدند. در هیچ یک از نمونههای کیک، پنیر و بستنی آلودگی به باسیلوس سرئوس مشاهده نشد. اما از 150 نمونه شیرخشک نوزاد، 30 نمونه آلوده به باسیلوس سرئوس (18 نمونه دارای کمتر از CFU/g 10 ، 7 نمونه CFU/g 102-10 و 5 نمونه بیشتر از CFU/g 102) بودند. نتایج آنتیبیوگرام نشان داد که باسیلوس سرئوسهای جدا شده نسبت به آنتیبیوتیکهای وانکومایسین (76/7 درصد)، تتراسایکلین (70 درصد) و کلرامفنیکل (3/63 درصد) بیشترین حساسیت و به آنتیبیوتیک پنی سیلین (100 درصد)، سفکسیم (100 درصد) و آمپی سیلین (7/96 درصد) بیشترین مقاومت را داشتند. نتایج کلی حاکی از شیوع قابل توجه باسیلوس سرئوس در شیر خشک های مورد آزمایش بود، که با توجه به روند رو به رشد استفاده از شیر خشک و اهمیت بیشتر به کیفیت و ارزیابی سلامت در شیر خشک های مصرفی، باید بررسی آلودگی و رویکردهای پیشگیرانه بیشتر مورد توجه قرار گیرد. پرونده مقاله -
دسترسی آزاد مقاله
303 - The study of flora Ghaysari region in Chaharmahal va Bakhtiari province with 179 species of medicinal plants
حمزه علی شیرمردی اصغر شاهرخی حسین محمدی نجف آبادی محمود طالبیBackground & Aim: The present study was to identify the medicinal plant species and introduced as one of the key priority areas for conservation and determination of endangered species were done.Experimental: The method of plant collection in this region was classic چکیده کاملBackground & Aim: The present study was to identify the medicinal plant species and introduced as one of the key priority areas for conservation and determination of endangered species were done.Experimental: The method of plant collection in this region was classical method of regional plant taxonomic studies. Collected plants were recognized and determined families, genera and species of them by using of indispensable references. The life form of plant species was determined by using of Raunkier’s method.Results & Discussion: The results of this study show that, 487 plant species belonging to 65 families and 301 genera exist in this area. Among the 487 species listed in this area, about 179 species (36.76% of the species) are medicinal. Furthermore, threatened species have been analyzed according to the IUCN criteria and Red Data Book of Iran. On the basis of this study, four categories of rare species so called endangered, vulnerable, lower risk and data deficient are determined. Accordingly, 86 threatened species were identified in this area that they all belong to the region, Iran – Tourna and 33 species that have some medicinal properties. Of these 86 species, two species in endangered class, three species in vulnerable class, 67 species in lower risk class and 14 species in data deficient class. Due to use nomads and villagers in the area of medicinal plants, some species such as, Ferula assa-foetida, Ferula gumosa, Allium ampeloprasum, Allium jesdianum, Allium hirtifolium and Zaravschanica membranacea are subject to destruction. پرونده مقاله -
دسترسی آزاد مقاله
304 - Steam reforming of propane over Ni-K/CeO2-Al2O3 catalyst in fluidized- and fixed-bed reactors under low steam to propane ratio
Mir Mohammad Motiee Golshan Mazloom Seyed Mehdi AlaviFluidized bed was employed to investigate propane steam reforming over Ni-K/CeO2-Al2O3 catalyst. The catalyst was characterized by XRD, SEM, TG/DTA, and N2 adsorption-desorption tests. Effects of promoters, space velocity, temperature, and steam/propane (S/C) ratio on p چکیده کاملFluidized bed was employed to investigate propane steam reforming over Ni-K/CeO2-Al2O3 catalyst. The catalyst was characterized by XRD, SEM, TG/DTA, and N2 adsorption-desorption tests. Effects of promoters, space velocity, temperature, and steam/propane (S/C) ratio on propane conversion, H2 yield, H2/CO ratio, and stability were studied and discussed. The experiments were carried out under conditions which favored coke formation. The reaction in the fluidized bed was compared with the reaction in a conventional fixed bed reactor. Obtained results indicated that fluidization and continuous circulation of catalyst induced back-mixing phenomena, increasing contact rate between catalysts and feed, uniform distribution of temperature, and steam concentration. As a result, higher conversion, H2 yield, and significant suppression of coke deposition were observed in the fluidized bed at all of the experimental conditions. The fluidized bed catalyst also exhibited good regenerability by restoring its initial catalytic activity after one h of regeneration in air. It was shown that fluidization could compensate for the lack of water and enhance coke gasification. At S/C=3, the catalytic performance in both reactors was almost stable. With decreasing S/C to 2.5, the activity in the fixed bed decreased rapidly. While the stability was more pronounced in the fluidized bed. At S/C=1.5, the catalyst at both reactors deactivated fast due to the lower H/C ratio, massive coke formation, and poor fluidization. پرونده مقاله -
دسترسی آزاد مقاله
305 - Nano-Fe3O4 as a heterogeneous recyclable magnetically separable catalyst for synthesis of nitrogen fused imidazoheterocycles via double C-N bond formation
Bhikan Khairnar Dhananjay Mane Murlidhar Shingare Bhata ChaudhariAn efficient and convenient approach towards the synthesis of nitrogen fused imidazoheterocycles through double C-N bond formation in a single step has been achieved with a good range of substituted phenacyl bromides in the presence of magnetically recoverable Fe3O4 as چکیده کاملAn efficient and convenient approach towards the synthesis of nitrogen fused imidazoheterocycles through double C-N bond formation in a single step has been achieved with a good range of substituted phenacyl bromides in the presence of magnetically recoverable Fe3O4 as a green heterogeneous nanocatalyst. The present approach was found to be environmentally benign and economically feasible in view of its ease of application, low cost and easy separation. Developed methodology has several advantages such as wide scope of substrates, easily available catalyst, operationally simple and high yield. Moreover, the magnetically separable catalyst was easily separated from the reaction mixture using an external magnet and recycled up to four times without much lost in its catalytic activity. پرونده مقاله -
دسترسی آزاد مقاله
306 - Solution of optimal control problems using shifted chebyshev polynomial
هاجر علیمرادThis paper suggests a new and efficient method for solving linear quadratic optimal control problems. A shifted chebyshev matrix approach is implemented for solving this problem. In this method, the problem of optimal control changes into a problem of non-linear program چکیده کاملThis paper suggests a new and efficient method for solving linear quadratic optimal control problems. A shifted chebyshev matrix approach is implemented for solving this problem. In this method, the problem of optimal control changes into a problem of non-linear programming which can be solved easily. The corresponding nonlinear programming problem will be solved using Matlab software to find the unknown coefficients which are related to the approximate solution. Numerical examples are also given in order to compare this new method with another one. پرونده مقاله -
دسترسی آزاد مقاله
307 - A BACKWARD DIFFERENTIATION FORMULA FOR THIRD-ORDER INITIAL OR BOUNDARY VALUES PROBLEMS USING COLLOCATION METHOD
GAFAR TIAMIYU Abosede COLE KHADEEJAH AUDUWe propose a new self-starting sixth-order hybrid block linear multistep method using backward differentiation formula for direct solution of third-order differential equations with either initial conditions or boundary conditions. The method used collocation and interp چکیده کاملWe propose a new self-starting sixth-order hybrid block linear multistep method using backward differentiation formula for direct solution of third-order differential equations with either initial conditions or boundary conditions. The method used collocation and interpolation techniques with three off-step points and five-step points, choosing power series as the basis function. The convergence of the method is established, and three numerical experiments of initial and boundary value problems are used to demonstrate the efficiency of the proposed method. The numerical results in Tables and Figures show the efficiency of the method. Furthermore, the numerical method outperformed the results from existing literature in terms of accuracy as evident in the results of absolute errors produced. پرونده مقاله -
دسترسی آزاد مقاله
308 - Physical Form of Calf Starter: Applied Metabolic and Performance Insights
A. Nikkhah M. AlimirzaeiThe objective of this review article was to evaluate and elaborate on dairy calves’ metabolic and growth responses to different physical forms of dry starter feed in relation to forage in the pre-weaning period. In addition, practical guidelines were discussed for چکیده کاملThe objective of this review article was to evaluate and elaborate on dairy calves’ metabolic and growth responses to different physical forms of dry starter feed in relation to forage in the pre-weaning period. In addition, practical guidelines were discussed for on-farm uses. Apart from chemical composition, physical structure of solid feeds can influence nutrient intake and growth of young calves. Starter feed intake is essential for the timely development of a functional rumen and successful weaning transition with minimized weaning distresses. The calf starters produced commercially include pelleted, mashed, and texturized forms. Numerous studies have investigated the effects of physical form of starter and feed particle size on dairy calf performance. However, the results have been inconsistent. In addition, forage particle size in dairy calf diets has not been precisely determined and more investigations seem to be required. It is believed that alterations in the physicochemical properties of feed ingredients during processing influences rumen digestion that can partially explain the inconsistencies in research outcomes. Calf starter comprises large amounts of grains with different starch content and varying degradation dynamics, thereby differently affecting the rumen environment and calf growth. Grain type and processing method may interact with other starter ingredients such as forage and high-protein meals, making it difficult to decide which processing method or physical form would be optimal or preferred. Moreover, the first three weeks of calf life is thought to be more critical than the rest of the pre-weaning period, which requires distinct nutritional and management considerations. Encouraging calves to consume solid feed intake in the early ages may be a multi-advantage practice to ensure that calves eat more starter during the rest of the pre-weaning period. Accordingly, physical form of starter diet might affect solid feed intake differently during these two distinct pre-weaning periods. In conclusion, understanding the effects of feed processing on calf rumen physiology and metabolism may provide practical outlooks for optimal preparation of starter diets for calves at different stages of growth. پرونده مقاله -
دسترسی آزاد مقاله
309 - Physical Form of Concentrate for Lactating Murciano-Granadina Dairy Goats: Feed Intake and Sorting, Milk Production, and Blood Metabolites
M.H. Khabbazan H. Amanlou D. Zahmatkesh E. Mahjoubi A. NikkhahGlobal demand for goat milk and its products is increasing. Goat producers are urged to improve feed efficiency and farm economics. Physical form of concentrate was hypothesized to affect lactating dairy goats’ responses in feed intake and sorting, milk production چکیده کاملGlobal demand for goat milk and its products is increasing. Goat producers are urged to improve feed efficiency and farm economics. Physical form of concentrate was hypothesized to affect lactating dairy goats’ responses in feed intake and sorting, milk production, and blood metabolites. The objective of this study was to determine effects of different physical forms of concentrate [mashed (M), pelleted (P), or textured (T)] on feed intake and sorting, milk production, and selected blood metabolites of lactating Murciano-Granadina dairy goats. Thirty Murciano-Granadina dairy goats in mid-lactation (87±6 days in milk; 2±0.04 kg/d milk yield) were used in a completely randomized design study and assigned to the three forms of concentrate (10 goats per treatment). Goats were fed the experimental diets as totally mixed rations (TMR). The data were analyzed using mixed models of SAS program. The dry matter intake (DMI) and yields of raw milk; fat-corrected milk; milk fat, protein, lactose, and solids not fat (SNF); and cheese as well as feed efficiency were improved (P<0.01) by feeding T instead of M and P. Feeding P vs. M improved milk production and feed efficiency (P<0.05). The milk percentages of fat, protein, lactose and blood concentrations of glucose, albumin, and non-esterified fatty acid (NEFA) were unaffected by treatments. Feed sorting occurred less for T than for the other physical forms of concentrate. Therefore, under the conditions of this experiment, feeding lactating Murciano-Granadina dairy goats TMR with textured concentrate compared to mashed and pelleted concentrates increased milk production and cheese yield estimates, and improved feed efficiency. پرونده مقاله -
دسترسی آزاد مقاله
310 - اثر بارشهای اسیدی بر میزان نفوذپذیری خاکهای تشکیل شده در سازند گچساران
حمزه سعیدیانهر توده خاک از دانههای جامد با اندازههای مختلف و فضاهای خالی بهم پیوسته تشکیل شده است که فضاهای خالی بهم پیوسته به آب این اجازه را میدهند که از یک نقطه با انرژی بالا به سمت نقطهای دیگر با انرژی پایین حرکت کند که نفوذپذیری خاک را بوجود میآورد. در این پژوهش به منظور چکیده کاملهر توده خاک از دانههای جامد با اندازههای مختلف و فضاهای خالی بهم پیوسته تشکیل شده است که فضاهای خالی بهم پیوسته به آب این اجازه را میدهند که از یک نقطه با انرژی بالا به سمت نقطهای دیگر با انرژی پایین حرکت کند که نفوذپذیری خاک را بوجود میآورد. در این پژوهش به منظور تعیین مهمترین عوامل موثر بر میزان نفوذپذیری خاک نسبت به بارشهای اسیدی در جهتهای اصلی دامنه در نهشتههای سازند گچساران، بخشی از حوزه آبخیز کوه گچ شهرستان ایذه با مساحت 1202 هکتار انتخاب گردید. این پژوهش به منظور تعیین رابطه بین میزان نفوذپذیری با برخی ویژگیهای فیزیکی و شیمیایی خاک مانند درصد شن، رس، سیلت، ماسه، اسیدیته، قابلیت هدایت الکتریکی، رطوبت، کربنات کلسیم و ماده آلی و سدیم در جهتهای مختلف دامنه در سازند گچساران بوسیله بارانساز انجام گرفت. به منظور بررسی عوامل موثر بر میزان نفوذ، نمونه برداری از خاک در لایه 20-0 سانتیمتری انجام شد. مدلهای رگرسیونی به دست آمده نشان دادند که بهطور کلی در همه جهتهای اصلی دامنه در سازند گچساران در بارش با آب مقطر خصوصیات شیمیایی خاک بیتشرین نقش را در افزایش و کاهش میزان نفوذپذیری خاک دارند و در بارش با اسیدیته پنج نیز خصوصیات شیمیایی خاک بیشترین نقش را در افزایش و کاهش میزان نفوذ پذیری خاک بازی میکنند ولی با افزایش اسیدیته به چهار، خصوصیات فیزیکی و شیمیایی خاک دارای نقش مساوی در افزایش و کاهش میزان نفوذپذیری خاک می-باشند. پرونده مقاله -
دسترسی آزاد مقاله
311 - طراحی برج مسکونی با رویکرد انرژی خورشیدی در منطقه ۲۲ تهران
افشین قربانی پارام علیرضا جزء پیری محمدرضا قربانی پارامامروزه با گسترش شهرها و مهاجرت به کلانشهرها، نیازها و مشکلات شهرنشینی روزبهروز در حال تغییروتحول است. با افزایش جمعیت و نیازهای آنها، و تبدیل خانههای ویلایی به برجها و آسمانخراشهای سر به فلک کشیده و به علت تعدد واحدها و طبقات، تعاملات اجتماعی در آنها مخدوش و استفا چکیده کاملامروزه با گسترش شهرها و مهاجرت به کلانشهرها، نیازها و مشکلات شهرنشینی روزبهروز در حال تغییروتحول است. با افزایش جمعیت و نیازهای آنها، و تبدیل خانههای ویلایی به برجها و آسمانخراشهای سر به فلک کشیده و به علت تعدد واحدها و طبقات، تعاملات اجتماعی در آنها مخدوش و استفاده از برق و سوخت فسیلی افزایشیافته از طرفی در تمام جهان، به دلیل وجود مشکلات اساسی چون مصرف بیرویه انرژی و هزینههای اقتصادی بالای آن، بهرهگیری از انرژی تجدیدپذیر خورشید در جهت کاهش مصرف انرژی، اهمیت زیادی پیدا کرده است. پژوهش حاضر باهدف طراحی برج مسکونی با رویکرد انرژی خورشیدی در منطقه 22 تهران انجام شد. به لحاظ هدف کاربردی است به لحاظ ماهیت توصیفی تحلیلی و به لحاظ دادهها کمی و کیفی است و از مدلسازی انرژی (سیمولیشن) استفاده شده است. گردآوری اطلاعات از دو روش کتابخانهای و میدانی صورت پذیرفت. نتایج پژوهش حاضر باتوجهبه جهتگیری ساختمان، حجم و فرم کلی ساختمان، جانمایی فضاهای داخلی، جدارهای تور گذر، سایهبان، استفاده از پوسته دوم و انجام محاسبات انرژی نشان از صرفهجویی انرژی دارد. پرونده مقاله -
دسترسی آزاد مقاله
312 - Effects of Multi-Wall Carbon Nano Tube (MWCNT) on Nepeta cataria and Salvia sclarea In Vitro culture
Hekmat A likhani Mehrjardi Parissa Jonoubi Ahmad Majd Reza Haji HosseiniNepeta cataria L. and Salvia sclarea L. are two species of Lamiacea family and endangered species in Yazd province of Iran. For this the reason we studied callus induction and shoot regeneration of these species and MWCNTs effects on them to improve the proliferation ra چکیده کاملNepeta cataria L. and Salvia sclarea L. are two species of Lamiacea family and endangered species in Yazd province of Iran. For this the reason we studied callus induction and shoot regeneration of these species and MWCNTs effects on them to improve the proliferation rate. In order to callus formation MS medium supplemented with 0.1mg l-1 Kin and 1 mg l-1 NAA were used. For shoot regeneration, MS containing 0.1 mg l-1 IAA and 1 mg l-1 BA were applied. Concentrations of carbon nanotubes at 0, 20, 60, 80 and 200 µg ml-1 MWCNTs in regeneration and callus induction media were used in both species. The results showed significant differences between using MWCNTs and control in callus induction and shoot regeneration rate. The most callus mass of N. cataria with 20 µg ml-1 was 304 mm3 whereas controls was 117.75 mm3. The highest callus mass of S. sclarea with 80 µg ml-1 MWCNTs was 414 mm3, but in controls was 182.15 mm3. Using of 20 µg ml-1 MWCNTs with 6.17 shoots per explants was the best shoot regeneration in N. catari and treatment by 80 µg ml-1 MWCNTs had the lowest regeneration rate. Using concentration of 80µg ml-1 MWCNTs with 4.2 shoots per explants led to maximum proliferation and the least regeneration was 1.85 shoots in 200 µg ml-1 MWCNTs treatment of S. sclarea. It seems that the effect of MWCNTs on propagation may be dose dependent, high concentrations of nanotubes reduce callus formation and shoot regeneration in these plants. پرونده مقاله -
دسترسی آزاد مقاله
313 - سطحبندی محلات شهری در برخورداری از شاخص قابلیت پیادهروی (نمونه مطالعاتی: محلات منطقه یک کلانشهر رشت)
مهین نسترن شادیه محمدییکی از چالشهایی که در سالهای اخیر مورد توجه برنامهریزان و طراحان شهری و محققان علوم پزشکی بوده است، سلامت عمومی جامعه میباشد. تشدید روزافزون اهمیت معضل سلامتی در جامعه شهری، موجب گردید تا در محافل علمی، بر نقش طراحی جنبههای کالبدی محیط، بر میزان قابلیت پیادهروی مح چکیده کاملیکی از چالشهایی که در سالهای اخیر مورد توجه برنامهریزان و طراحان شهری و محققان علوم پزشکی بوده است، سلامت عمومی جامعه میباشد. تشدید روزافزون اهمیت معضل سلامتی در جامعه شهری، موجب گردید تا در محافل علمی، بر نقش طراحی جنبههای کالبدی محیط، بر میزان قابلیت پیادهروی محیط و فعالیت بدنی شهروندان تأکید گردد. در این ارتباط، توافق محققان علوم شهری بر این است که ساختار کالبدی توسعه پراکنده، با تشویق بیشتر به استفاده از اتومبیل، مانع پیادهروی و دیگر فعالیتهای بدنی می شود. پژوهش حاضر از نظر هدف کاربردی و از نظر روش، توصیفی-تحلیلی بوده و در آن گردآوری دادهها در رویکرد عینی با استفاده نرمافزارهای GIS، Auto cadوDepth map صورت گرفتهاست. در این راستا با مروری بر پژوهشهای صورتگرفته در زمینه ارتباط فرم شهر و تحرکپذیری، به شناخت شاخصهای تاثیرگذار فرم شهر در ارتقا قابلیت پیادهروی محیط محلهای، پرداخته شد و هفت شاخص تراکم مسکونی، تنوع، اتصال، مجاورت، متوسط سطح بلوک، برخورداری خیابانها از پیادهرو و تراکم تجاری (سطح اشغال خردهفروشیها) ؛ به عنوان شاخصهای کالبدی- محیطی موثر در ارتقا قابلیت پیادهروی مورد سنجش قرار گرفت. نتایج تحلیل عینی شاخصهای اولیه قابلیت پیادهروی، هدف اصلی پژوهش یعنی سطح بندی محلات منطقه یک شهر رشت را از نظر برخورداری از این شاخص کلی بدست داد. مطابق نتایج با فاصله از مرکز شهر به سمت نواحی مرزی، قابلیت پیادهروی محلات کاهش مییابد و این شاخص در محلات روستا-شهری حومهای شهر، در پایین ترین سطح قرار دارد. همچنین با توجه به فرم شهری، محلات دارای طراحی اولیه و بافت منظم، نسبت به محلات با بافت ارگانیک سنتی و ارگانیک روستایی در سطوح بالاتر این شاخص قرار دارند. پرونده مقاله -
دسترسی آزاد مقاله
314 - بررسی امکان استفاده از نقشه واحدهای اراضی به عنوان نقشه واحدهای کاری در تهیه نقشه فرسایشهای سطحی، شیاری و خندقی به کمک سامانه اطلاعات جغرافیای (GIS)
علی محمدی ترکاشوندامکان استفاده از نقشه واحدهای اراضی به عنوان نقشه واحدهای کاری در تهیه نقشه های چهره های مختلف فرسایش آبی در حوزه پایین دست سد لتیان بررسی شد. نقشه های واقعیت زمینی هر یک از فرسایش های سطحی، شیاری، خندقی و اشکال فرسایش تهیه شد و لایه رقومی هر یک از آنها با لایه واحدهای چکیده کاملامکان استفاده از نقشه واحدهای اراضی به عنوان نقشه واحدهای کاری در تهیه نقشه های چهره های مختلف فرسایش آبی در حوزه پایین دست سد لتیان بررسی شد. نقشه های واقعیت زمینی هر یک از فرسایش های سطحی، شیاری، خندقی و اشکال فرسایش تهیه شد و لایه رقومی هر یک از آنها با لایه واحدهای اراضی قطع داده شد و صحت، خطا و دقت این لایه به عنوان یک مدل در برآورد چهره های فرسایش محاسبه گردید. نتایج نشان داد که صحت نقشه واحدهای اراضی در تهیه نقشه فرسایش های سطحی، شیاری، خندقی و اشکال فرسایش به ترتیب 1/66، 6/66، 0/82 و 0/53 درصد است. این نقشه در تهیه نقشه اشکال فرسایش دارای صحت پایینی است، لذا نمی تواند به عنوان نقشه واحدهای کاری در تهیه نقشه اشکال فرسایش استفاده شود پرونده مقاله -
دسترسی آزاد مقاله
315 - Development of Graft Union Formation and Histological Observations in Cactus Influenced by Benzyladenine, Grafting Method and Rootstock
Najme Kamalzade Seied Mehdi Miri Noushin GhazijahaniAttractive and colorful cultivars of cactus have been developed that are mainly propagated by grafting. The aim of this study was to determine histological events during graft union formation in Gymnocalycium cactus influenced by BA (Benzyladenine) application, grafting چکیده کاملAttractive and colorful cultivars of cactus have been developed that are mainly propagated by grafting. The aim of this study was to determine histological events during graft union formation in Gymnocalycium cactus influenced by BA (Benzyladenine) application, grafting method and rootstock. The basal end of the scions and the top end of the rootstocks were first dipped into BA solution at concentrations of 0, 100 and 500 mg L-1 for 10 s, before being grafted on Lemaireocereus marginatus and Myrtillocactus geometrizans rootstocks using horizontal or wedge techniques. Longitudinal sections of the graft union were taken weekly to observe the developmental process of graft formation. The rootstocks did not have a significant effect on grafting success and scion growth, while horizontally grafted Gymnocalycium showed better grafting success rate. The grafting rate and scion growth were enhanced by application of BA compared with the control. The best results were obtained from treating the graft cut-surfaces of both scions and rootstocks with 100 mg L-1 BA. Histological observations showed that the graft union process involved development of a thin necrotic layer, callus formation at the graft interface, cambium differentiation and initiation of new vascular elements, developing the new vascular tissue, and connection of scion and rootstock vascular bundles. BA stimulated rapid proliferation of callus between the scion and rootstock as well as differentiation of vascular elements. We suggest the horizontal graft and application of BA (100 mg L-1) on the cut surfaces of both scion and rootstock as an easy and reliable method for successful graft union in Gymnocalycium cactus, which may have potential use in the commercial production of other cactus species as well. پرونده مقاله -
دسترسی آزاد مقاله
316 - Measuring Socioeconomic Status of Rural Households in Edo State, Nigeria: An Asset-Based Approach
Eddy Onemolease A.O AkioyaAvailable data on farmers’ socioeconomic or poverty status have focused on the use of money-metric measure of income and/or expenditure, an approach that has been criticized. An alternative, proposed to assessing households’ welfare has been to use asset ind چکیده کاملAvailable data on farmers’ socioeconomic or poverty status have focused on the use of money-metric measure of income and/or expenditure, an approach that has been criticized. An alternative, proposed to assessing households’ welfare has been to use asset indices; unfortunately, there is dearth of such study in Edo state. This study therefore assessed the socioeconomic status (SES) of farming households in Edo state, Nigeriabased on asset formation. Data were collected by means of questionnaire from 394 respondents, randomly selected from the (3) agricultural zones in the state. The data were analyzed using asset index. Using asset indices as a proxy for poverty, the study established that 36.64% of the households had high socioeconomic status (i.e. non-poor), 49.87% were moderately poor while 13.49% were very poor. However, the level of households’ asset formation was constrained by several factors. The study therefore recommended expanding credit allocation to farmers, improving road networks, establishing more agricultural extension contacts with farmers and encouraging the latter to adopt improved farm practices. پرونده مقاله -
دسترسی آزاد مقاله
317 - بررسی تطبیقی نگرش دو نسل نسبت به تشکیل خانواده ( مطالعه موردی پسران 20 تا 30 ساله شهر شوشتر و پدرانشان)
یوسف امینی محمد امینی مصطفی محمودیموضوع این تحقیق، برسی تطبیقی طرز تلقی پدران و پسرانشان از تشکیل خانواده (ازدواج و فرزندآوری) است. این تحقیق از روش پیمایش بهره گرفته و از نوع مقایسه گروهها میباشد. جمعیت آماری پسران 20 تا 30 ساله شهر شوشتر و پدرانشان هستند. حجم نمونه معادل 280 نفر (140 نفر پسر و 140 ن چکیده کاملموضوع این تحقیق، برسی تطبیقی طرز تلقی پدران و پسرانشان از تشکیل خانواده (ازدواج و فرزندآوری) است. این تحقیق از روش پیمایش بهره گرفته و از نوع مقایسه گروهها میباشد. جمعیت آماری پسران 20 تا 30 ساله شهر شوشتر و پدرانشان هستند. حجم نمونه معادل 280 نفر (140 نفر پسر و 140 نفر پدرانشان) محاسبه گردید. روش نمونهگیری تصادفی ساده است و تکنیک گردآوری اطلاعات، پرسشنامه همراه با مصاحبه میباشد. پس از مرور ادبیات تحقیق بر پایه نظریههای ازدواج، دیدگاههای شکاف نسلی و نگرشها و به کمک یافتههای تحقیقات پیشین، سؤالات تحقیق در قالب فرضیه قرار گرفت. دادهها حکایت از بالا رفتن سن ازدواج دو جنس دارند. در همه سطوح، میان نظر پدران و پسران در مورد سن ازدواج تفاوت معناداری وجود داشت. بین نظر پسران در مورد سن مناسب ازدواج با قومیت و میزان گرایش دینی، اختلاف معنیداری وجود داشت. این تفاوت در گروه پدران نیز مشاهده گردید. میانگین فرزند مطلوب هم از نظر پدران و هم از نظر پسران تقریباً دو فرزند بود در حالیکه میانگین تعداد فرزند پدران حدود 4 فرزند است. هر دو گروه بر عدم ادامه باروری در صورت دختر بودن فرزند اول به یک اندازه توافق نظر دارند ولی در میان کسانی که با ادامه باروری موافقند، پدران با تعداد بالاتری موافقت نشان دادهاند. هم پدران و هم پسران درخصوص ترکیب جنسی فرزندان در تعداد بیش از دو فرزند بر ترکیب غالب پسر تأکید دارند. در خصوص همسان همسری در زمینه مذهبی و قومی، پدران علاقه بیشتری نشان دادهاند. پرونده مقاله -
دسترسی آزاد مقاله
318 - بررسی عوامل اجتماعی مؤثر بر دینداری، مطالعه موردی جوانان شهر تهران
عبدالرضا ادهمی سعید کشانیبر پایه نظریههای کنش متقابل نمادین و نقش پذیری میان متغیرهای تحقیق ارتباط نظری برقرار شده و فرضیات تحقیق مطرح گردید. برای سنجش دینداری با تکیه بر چارچوب نظری و تحقیقات پیشین از مقیاس معتبری استفاده شد که پیش از این بارها در تحقیقات خارج و داخل کشور مورد آزمون قرار گ چکیده کاملبر پایه نظریههای کنش متقابل نمادین و نقش پذیری میان متغیرهای تحقیق ارتباط نظری برقرار شده و فرضیات تحقیق مطرح گردید. برای سنجش دینداری با تکیه بر چارچوب نظری و تحقیقات پیشین از مقیاس معتبری استفاده شد که پیش از این بارها در تحقیقات خارج و داخل کشور مورد آزمون قرار گرفته است. در سنجش این مفهوم از مقیاس گلاک و استارک در چهار بعد (اعتقادی، عاطفی، پیامدی و مناسکی) استفاده شد. متغیرهای مستقل تحقیق نیز پس از مرور تحقیقات مرتبط با تکیه بر جوانب نظری بحث تعریف و شاخص سازی شدند و با استفاده از آزمونهای اعتبار و پایایی مورد سنجش و استانداردسازی قرار گرفتند. همه فرضیات تحقیق که بیان گر رابطه میان دینداری و عوامل مؤثر بر آن (آموزش رسمی مذهبی، آموزش غیر رسمی مذهبی، خانواده، دوستان، سرمایه اجتماعی، رسانه، سن، جنسیت، تحصیلات به جزءتأهل) تایید شدند. همچنین یافتهها نشان می دهند ابعاد مناسکی، اعتقادی، عاطفی و پیامدی به ترتیب بیشترین روابط همبستگی را با متغیرهای مستقل تحقیق داشتهاند. از سوی دیگر آموزش رسمی، دوستان مذهبی، خانواده مذهبی، آموزش غیر رسمی، رسانه، سن و سرمایه اجتماعی به ترتیب بیشترین همبستگی را با ابعاد مختلف دینداری داشتهاند. نوع روابط میان این متغیرها با دینداری عموماً مثبت و در سطح متوسط تا قوی است. پرونده مقاله -
دسترسی آزاد مقاله
319 - Identification of Strategies for Sustainable Development of Rice Production in Guilan Province Using SWOT Analysis
محسن شفیعیان اصطهباناتی مهدی همایونفر مهدی فداییSustainable development is one of the most important issues that can be considered from different aspects and in different contexts including sustainable agriculture. This study aimed to investigate the main strategies related to sustainable development of rice producti چکیده کاملSustainable development is one of the most important issues that can be considered from different aspects and in different contexts including sustainable agriculture. This study aimed to investigate the main strategies related to sustainable development of rice production as an important agricultural product in Guilan Province using a SWOT analysis. To this end, different internal (strengths and weaknesses) and external (opportunities and threats) factors affecting rice production development were reviewed in the literature. Next, a questionnaire was designed based on the potential opportunities, threats, strengths and weaknesses in the literature and the initial interview of the experts; then, the experts were asked to determine the importance of factors on a five-point Likert type scale. The results showed that the rice production received the total scores of 2.14 and 2.24 for the External Factor Evaluation (EFE) matrix and the Internal Factor Evaluation (IFE) matrix, respectively, indicating the ineffectiveness of the industry’s strategies. These scores mapped the position of rice production in Guilan Province. Finally, a number of strategies for sustainable development of rice crop were outlined in order to reduce the weaknesses, avoid the threats, improve the strengths, and grasp the opportunities for the rice production of Guilan Province. پرونده مقاله -
دسترسی آزاد مقاله
320 - Microfacies and Sedimentary Environment of The Tarbur Formation In Kherameh Area (Southeast Of Shiraz)
Masih Afghah Elham YousefzadehTarbur Fonnations in southeast of kherameh with 700 m thickness are dominantly formed from carbonate rocks. The lower boundary with gurpi formation is conformable and the upper boundary with Sachun Formation is marked by an erosional surface. According to the lithologic چکیده کاملTarbur Fonnations in southeast of kherameh with 700 m thickness are dominantly formed from carbonate rocks. The lower boundary with gurpi formation is conformable and the upper boundary with Sachun Formation is marked by an erosional surface. According to the lithological characteristics of the Tarbur Formation six lithological units in Kherameh area were recognaized.The study of pertrography indicates that carbonate sediments of the Tarbur Formation can be divided into 8 groups of carbonte microfacies, including: 01,02 (Open marine), B (Barrier) and Ll to L5 (Lagoon). Vertical changes in microfacies and diagram of the sea level show that sedimentation of the Tarbur Formation took place in a shallow environment. Tarbur Formation in the study area is formed in a carbonate platform (epicontinental sea), in a homoclinal ramp. پرونده مقاله -
دسترسی آزاد مقاله
321 - Qualitative and quantitative study of the microfacies of the Sarvak Formation Kuh-e Khane-Kat and Kuh-e Shah-Neshin Sections in Fars province
Masih Afghah Mohammadsadeg DehghanianThis study is about two stratigraphic sections of the Sarvak Formation, namely Kuh-e Khane-Kat and Kuh-e Shah-Neshin sections. Over 250 meters of the Sarvak Formation and 200 thin sections have been studied. Index microfacies and foraminifers have been identified. Index چکیده کاملThis study is about two stratigraphic sections of the Sarvak Formation, namely Kuh-e Khane-Kat and Kuh-e Shah-Neshin sections. Over 250 meters of the Sarvak Formation and 200 thin sections have been studied. Index microfacies and foraminifers have been identified. Index microfacies include: mudstone, wackestone, packstone and grainstone. The amount of bioclasts have been determined as larger than of the other microfacies elements. Based on micropaleontological data, the age of the Sarvak Formation is Cenomanian. پرونده مقاله -
دسترسی آزاد مقاله
322 - Study of microfacies of the Kazhdomi Formation in northeast of Shiraz (Ab Chego mountain)
Masih Afghah Roya Fanati RashidiThis research studies one stratigraphic section of the Kazhdomi Formation with 172 m thickness, 75 km to the northeast of shiraz . This study shows that lithology of this section is interbedding of medium-bedded limestone and marly limestone. Index macrofacies include: چکیده کاملThis research studies one stratigraphic section of the Kazhdomi Formation with 172 m thickness, 75 km to the northeast of shiraz . This study shows that lithology of this section is interbedding of medium-bedded limestone and marly limestone. Index macrofacies include: wackstones and packestones. The major elements of microfacies are bioclast, extraclast and some peloids. Although the amount of these elements changes in different places of the section, bioclasts exist more than the other elements. This section is full of different types of macrofossils such as: Corals, Crinoids, Brachiopoda, Lamellibranchia, Gastropoda and Ammonite. The age of the Kazhdomi Formation in this stratigraphic section is according to its Foraminifers such as Mesorbitolina texana, Mesorbitolina cf. subconcava, Conicorbitolina cf. conica, Orbitolina duranddelgai, Palorbitolina lenticularis, Simpleorbitolina cf. manasi, Hedbergella cf. washitensis, Hedbergella sp., Rotalipora sp., Pseudolituonella sp., Numuculina sp, Praechysalidina sp. end of the Late Aptian to the Early Cenomanian. پرونده مقاله -
دسترسی آزاد مقاله
323 - Petro physical evaluation of in the one ofoil wells Abadan plain hydrocarbon basin
Naser Ebadati Mohammad ZarbalizadehAbadan plain is considered as the one of the hydrocarbon sub basins in south of Zagros in Iran which from the tectonic viewpoint is known as the Arabian plate north platform terminal. Existence of basic differences in Abadan plain sediments due to the structural geologi چکیده کاملAbadan plain is considered as the one of the hydrocarbon sub basins in south of Zagros in Iran which from the tectonic viewpoint is known as the Arabian plate north platform terminal. Existence of basic differences in Abadan plain sediments due to the structural geological viewpoint with Zagros sediments area and Dezful embayment shows the petro physical studies necessary. So for determination of porosity, shale volume and water formation saturation from important rank factors after the determination by the probes and data sending and their processing as the full set logs, related data was prepared as the diagrams and then determination and evaluation was performed by two certain and probable methods. As it is observed in Sarvak Formation interval, the results showed that major lithology was carbonate and also observed with Dolomite rocks in the depth of 3250-3575 and 3450-3475 m. From the oil reservoir viewpoint, 3125-3265 m is the best hydrocarbon depth in wells, though beside oil zone, free water zone is present but due to the 30% water saturate sub limit can almost have more oil reservoir. But due to the very low quality, next predicts for depth less than 3125 and 3240 m till the Sarvak interval ending has no certainty. پرونده مقاله -
دسترسی آزاد مقاله
324 - The study of microfacies and sedimentary environments of the Kazhdumi Formation northeast of Shiraz
Masih Afghah Ahmad Motamed Sara Shokrollahi AllafThe Kazhdumi Formation northeast of Shiraz (Gadvan Mount) is composed of 247.7 meters of carbonate rocks. Its lower contact is disconformable with the Dariyan Formation, which is marked by iron oxide. Its upper contact with the Sarvak Formation is gradual. After samplin چکیده کاملThe Kazhdumi Formation northeast of Shiraz (Gadvan Mount) is composed of 247.7 meters of carbonate rocks. Its lower contact is disconformable with the Dariyan Formation, which is marked by iron oxide. Its upper contact with the Sarvak Formation is gradual. After sampling, 80 thin sections have been provided. Based on index microfossils, Albian-Early Cenomanian age has been determined for Kazhdumi Formation and 12 carbonate microfacies have been recognized, each of which has been deposited in different parts of lagoon and open marine sedimentary environments. Facies analysis of the Kazhdumi Formation in the study area and comparison with modern sedimentary environments indicate that these facies have been deposited in a ramp type of carbonate platform. The vertical changes of microfacies suggest 6 sedimentary cycles on the scale of several ten meters. However, each of these cycles contains several smaller cycles, each of several-meter scale. پرونده مقاله -
دسترسی آزاد مقاله
325 - Study of reservoir potential limiting factors of the Mishan Formation in the west of Fars
Alireza Rastegar LariThe Mishan Formation (Middle Miocene) is the middle part of the Fars Group. To determine the limiting factors of reservoir potential in the Mishan Formation in Fars Province, three geological cross sections in western Fars and a comparative one southwest of Boushehr hav چکیده کاملThe Mishan Formation (Middle Miocene) is the middle part of the Fars Group. To determine the limiting factors of reservoir potential in the Mishan Formation in Fars Province, three geological cross sections in western Fars and a comparative one southwest of Boushehr have been studied. In these sections the Mishan Formation consists of shale, marl and sandstone and limestone facies. Poorly developed primary and secondary porosity features on the one hand, and occurrence of porosity decreasing diagenetic processes such as cementation, compaction, calcite and silica fillings and also bioturbation on the other hand lead to absence of sufficient porosity in these deposits. پرونده مقاله -
دسترسی آزاد مقاله
326 - Engineering geology and engineering classification of rock masses in the site of Gharehpiri dam, NW of Shiraz
Godratolah Farhoudi Jafar Rahnamarad Ali Rahimi Babak Samani Afshin KarimiThe site of the Gharehpiri dam is located in the Simply Folded Zone of the Zagros Mountain Ranges. The abutments of the dam are located on the solid limestone of the Tertiary Asmari-Jahrom Formation. From the structural point of view the morphological and geotechnical c چکیده کاملThe site of the Gharehpiri dam is located in the Simply Folded Zone of the Zagros Mountain Ranges. The abutments of the dam are located on the solid limestone of the Tertiary Asmari-Jahrom Formation. From the structural point of view the morphological and geotechnical characteristics of the dam have been affected by some joint systems and minor faults. Detailed investigations related to engineering geology, structural geology of the dam site and its geotechnical characteristics show a good result considering joint analysis, layering and quality of rock masses, evaluated by two methods, namely Barton and RMR methods. پرونده مقاله -
دسترسی آزاد مقاله
327 - Calculating the drilling mud weight window and geomechanical properties of Darian limestone formation in Reshadat oil field
Naser Ebadati Mohammad NajariIn the oil province of southern Iran like other hydrocarbon zones, thorough understanding and risk management resulting from the rock mass deformation, can be of great help in executing operational processes such as the stabilization of the borehole wall, controlling th چکیده کاملIn the oil province of southern Iran like other hydrocarbon zones, thorough understanding and risk management resulting from the rock mass deformation, can be of great help in executing operational processes such as the stabilization of the borehole wall, controlling the sand production in the borehole and hydraulic fracture. In oil well excavation operations, determining maximum and minimum horizontal stresses helps in designing the excavation route in the minimum stress direction so that collapsing of the borehole wall and drilling tube blockage against the rocks is avoided. The aim of this study was removing the main excavation problems especially of the diversion wells through exact geomechanical calculations in the Darian lime formation depth range in the understudy field. In order to develop the geomechanical model, first the bulk, the shear and the Young's modules, the Poisson coefficient and Vp/Vs ratio were calculated using the visual log data integrated with the geomechanical parameters, and the strength parameters like uniaxial compressive strength, internal friction coefficient and tensile strengths and static modulus of elasticity were determined and then the determination of direction and min/max horizontal stresses alongside the formation thickness were studied. In the end by the assessment of the geomechanical model and calculating the mud weight during drilling of the understudy well, and using the STAB View software output, the mud weight window of 80-120 PCF and the drilling Azimuth range of 30°- 45° was recommended for the prevention of borehole wall collapse for Darian formation. پرونده مقاله -
دسترسی آزاد مقاله
328 - Application of Artificial Neural Networks (ANN) to Predict Geomechanical Properties of Asmari Limestones
Mahdi Razifard Mashallah Khamechiyan Mohammad Reza Amin‐NaseriA number of common laboratory rock mechanics tests are carried out in all geotechnical projects such as dams, to determine parameters such as porosity, density, water absorption, sonic velocity, Brazilian tensile strength, uniaxial compressive strength, and triaxial com چکیده کاملA number of common laboratory rock mechanics tests are carried out in all geotechnical projects such as dams, to determine parameters such as porosity, density, water absorption, sonic velocity, Brazilian tensile strength, uniaxial compressive strength, and triaxial compressive strength. In this paper, data obtained from two dams in Asmari Formation including Khersan 1 and Karun 4 - both located in Chahar-Mahal Va Bakhtiari Province, Iran - have been subjected to a series of statistical analyses. Then, using Multivariate Linear Regression (MLR) and Artificial Neural Networks values of UCS, E, C, and φ were predicted using the input parameters including depth, compression ultrasonic velocity, porosity, density, and Brazilian tensile strength. The designed ANN in this research was a feedforward backpropagation network which is powerful tool to solve prediction problems. Designed network had two hidden layer (hidden layer 1: 18 neurons and hidden layer 2: 20 neurons). Via comparing designed MLR and ANN models, it was revealed that ANNs (R2 UCS= 0.91, R2 = 0.87, R2 =0.78, R2 EC phi = 0.61) are more efficient than MLR models (R2 UCS= 0.69, R = 0.69, R = 0.66, and R2 22 EC phi = 0.50) in predicting strength and shear parameters of the intact rock. Also, to enhance the credibility of this study, some extra tests were carried out to evaluate the efficiency of network designed for prediction of strength parameters. The results obtained from this network were as: R2 UCS= 0.85, R2E = 0.81. پرونده مقاله -
دسترسی آزاد مقاله
329 - Stratigraphy of lower part of Amiran Formation in N.W and S.E of Khorramabad
Khosro Khosrotehrani Ahmad Abyat Masih AfghahIn order to study of stratigraphy of Lower part of Amiran formation In Northwest and Southeast of Khorramabad, tow stratigraphic sections were chooses consist of Cham sangar section at Southeast and Tang-e shabikhon section at Northwest of Khorram Abad. In microbiostrat چکیده کاملIn order to study of stratigraphy of Lower part of Amiran formation In Northwest and Southeast of Khorramabad, tow stratigraphic sections were chooses consist of Cham sangar section at Southeast and Tang-e shabikhon section at Northwest of Khorram Abad. In microbiostratigraphy investigations were identified 23 genuses and 35 various species of benthic foraminifera in these sections which are identified include:Loftusia minor, L. harisoni, L. coxi, L. elongata, L. morgani, L. sp., Dicyclina shlumbergeri, D. sp., Minouxia lobata, M. sp., Cuneolina sp., Antalyna korayi, Psuedolithounella sp., Broekinella sp., Omphalocyclus macroporus, Orbitoides media, O. cancavatus, O. tissoti, O. apiculata, Siderolites calcitrapoides, S. sp., Rotalia trochidiformis, R. sp., Nezzazatinella sp., Vania anatolica, Valvulammina sp., Murciella sp., Trochospirsa sp., Idalina antiqe, Dictyoconella complanata, Cyclammina sp., Dictyoconus sp., Gavelinella sp., Goupillaudina sp., Miliolids.According to the micropaleontology data, the age of Lower part of Amiran Formation at Northwest and Southeast of Khorramabad is middle to upper Maestrichtian. Micropaleontological data indicate that large quantity and size of agglutinate foraminifers in Lorestan area that seem Amiran formations flysh were effected to the agglutinate shell growing. پرونده مقاله -
دسترسی آزاد مقاله
330 - Silurian undersea basalts in VMS mineralization in the North-East of Shahrood
Abodelreza JafarianThe Soltan-Meydan basaltic suite contains a range of undersea mafic volcanic rocks whose stratigraphy position indicates lower Paleozoic (Silurian). In geology of Iran it has been named Soltan-Meydan Formation. However, Tectono-magmatic aspects of this suite and their r چکیده کاملThe Soltan-Meydan basaltic suite contains a range of undersea mafic volcanic rocks whose stratigraphy position indicates lower Paleozoic (Silurian). In geology of Iran it has been named Soltan-Meydan Formation. However, Tectono-magmatic aspects of this suite and their relationship with copper mineralization have not been studied yet. The aim of this study is to clarify these relationships. Out of three traverses of this suite more than 150 rock samples were collected and their thin sections were studied. 14 relatively fresh samples were selected for the purpose of geochemical analysis of major and trace plus REE elements. Thin section studies indicate a wide range of hydrothermal alterations, in which Chloritization is the most altered mineral. The Soltan-Meydan volcanic suite represents within-plate magmatism which seems to have erupted in the extensional regime. Some samples with more than 1% copper concentration contain copper sulfide mineralization. In addition, samples with high concentration of Zn and Pb are common figures in most whole rock analyses. Copper sulfides, hydrated copper carbonates, iron oxides and jasper are accompanied by two types of associations of hydrothermal alteration: a) high temperature associations and b) low temperature associations. Consequently, they may have generated volcanic massive sulfide (VMS) deposits in the mentioned suite. پرونده مقاله -
دسترسی آزاد مقاله
331 - Investigation of microfacies and sedimentary environments of Qom Formation in the south of Saveh
Somayeh Zare Mir reza Mosavi Mohssen Al-AliQom Formation with Oligo-Miocene age is the most important known hydrocarbon formation in Central Iran. The deposits of this formation in Band-Amir section in the northwest of Saveh have been studied in order to study stratigraphy, facies analysis and interpretation of چکیده کاملQom Formation with Oligo-Miocene age is the most important known hydrocarbon formation in Central Iran. The deposits of this formation in Band-Amir section in the northwest of Saveh have been studied in order to study stratigraphy, facies analysis and interpretation of sedimentary environments. The study area is located in the structural-sedimentary zone of Central Iran. The facies changes of the Qom Formation are so great that gypsum and gypsum-bearing marls are deposited when the sea level goes down and limestone and marl are left when the sea level rises. Thus, in many areas, the Qom Formation can be considered as a periodicity of marl and limestone along with gypsum and gypsum marl layers. This formation is located with a discontinuity on the lower red formation and also in a slope below the upper red formation. Due to the sedimentary environment of Qom Formation, the sequences of sediments in this formation have a significant diversity in terms of lithology and are of great importance in terms of reservoir rock, source rock and rock cover. The section of Qom Formation in the northwest of Saveh has a thickness of 198 meters. Extensive and detailed microscopic studies in Band-Amir section have led to the identification of various facies in the form of three facies groups related to the marine environments of the lagoon, dam and open sea. Wetland facies are made of rocks with Paxtonian and Waxtonian texture. Reef facies are of the coral bandstone type and have formed dam deposits. Offshore facies have the characteristics of turbidite facies and basin deposits. Absence of tidal facies and abundance of facies due to reef debris and turbidite deposits are the characteristics of Qom Formation in the study area. Investigation of lateral and vertical changes of facies shows that the deposits of Qom Formation in the studied section are deposited in a carbonate platform of marginal shelf type. پرونده مقاله -
دسترسی آزاد مقاله
332 - Palynology and paleoenvironmental study of the Kalat Formation in the east of the Kopet – Dagh sedimentary basin
Mohsen Allameh Ebrahim Ghasemi-Nejad Abdollah SaeidiThe Kopet–Dagh sedimentary basin stretches in northeastern Iran as narrow and long ranges and contains sediments of the Jurassic to recent ages. One of the lithostratigraphic units in this basin is the Kalat Formation with an age of the latest Cretaceous. The Form چکیده کاملThe Kopet–Dagh sedimentary basin stretches in northeastern Iran as narrow and long ranges and contains sediments of the Jurassic to recent ages. One of the lithostratigraphic units in this basin is the Kalat Formation with an age of the latest Cretaceous. The Formation is made up of sandy limestones and shales. In order to study the palynology, palynofacies and paleoenvironment of these Formations three sections, Chahchahe, Tange–Neyzar and Padly, were sampled palynologically and the samples were prepared and studied. Some of the samples proved to be rich in dinoflagellates and some 40 species belonging to 29 genera were recorded. Palynofacies studies show that the Formation was deposited in a shallow- open marine environment with moderate to high energy conditions. پرونده مقاله -
دسترسی آزاد مقاله
333 - Engineering geological assessment of the Shahid dam site (Semirom, Iran)
Mojtaba Rahimi Shahid Fariba Kargaran bafghi Seyed Mehdi Moosavi Nima RahimiThis paper discusses the results of the site investigations and rock mechanics studies carried out at the proposed Shahid dam site. Engineering geological properties of rock masses, such as permeability along the dam axis, discontinuities, strength, and stability of abu چکیده کاملThis paper discusses the results of the site investigations and rock mechanics studies carried out at the proposed Shahid dam site. Engineering geological properties of rock masses, such as permeability along the dam axis, discontinuities, strength, and stability of abutments, were investigated in order to determine probable problems prior to constructions. Shahid Dam is an earth fill dam with the clay core. The dam on the Marbor river, is located about 110 km of south of Semirom city in the Isfahan Province, Iran. The dam and its associated earth structures are mainly founded on alluvium and limestone in the High Zagros zone. Quaternary alluvium at the dam site has a thickness of about 20 m and overlies the Surmeh, Gadvan and breccia formations, comprises the Jurassic, Cretaceous and Post-Cretaceous rocks of the Zagros Mountains. Studies were carried out both at the field and the laboratory. Field studies include engineering geological mapping, intensive discontinuity surveying, kinematical analyses, drilling, Lugeon and Lofran permeability tests, and sampling for laboratory testing. Rock mass classifications, strength characteristics, and constants of rock masses were expressed by using Hoek-Brown empirical failure criteria, RMR, GSI, and Q values. The results of the investigations indicate that the foundation rocks are suitable for designing the proposed Shahid dam, and the rocks exposed in the right bank are of higher quality rock masses when compared to those in the left bank. پرونده مقاله -
دسترسی آزاد مقاله
334 - Microfacies and Sedimentary Environment of Tarbur Formation in Dorahan area, (east Lordegan)
Mir Hassan Moosavi Borzo Asgari PirbalotiTarbur Formation in the east of Lordegan includes mainly limestone, 182m thickness. Tarbur Formation lower contact with Gurpi Formation is disconformity and Upper contact with Pabdeh Formation, graded. Age of Tarbur Formation based on index fossil is Middle to Upper Mas چکیده کاملTarbur Formation in the east of Lordegan includes mainly limestone, 182m thickness. Tarbur Formation lower contact with Gurpi Formation is disconformity and Upper contact with Pabdeh Formation, graded. Age of Tarbur Formation based on index fossil is Middle to Upper Mastrichtian (Upper Cretaceous). Microfacies include grainstone, wackestone to packstone and wackestone that shows open marine, bar (reef) and lagoon environment in the study area. Tarbur Formation in the study area deposited in Epicontinental platform. پرونده مقاله -
دسترسی آزاد مقاله
335 - Environmental interpretation and sequence stratigraphy of the Nazarkardeh Formation (Anisian) in Aghdarband area, NE Iran
Mohammad Javanbakht Reza Moussavi Harami Asadollah Mahboubi Ehsan SharifiThe Nazarkardeh Formation with of early Anisian age crops out in the Aghdarband erosional window in NE the northwestern part of Iran and is the second unit of the Aghdarband Group. The lower contact with the Sefidkuh Formation is gradational, while the upper contact wit چکیده کاملThe Nazarkardeh Formation with of early Anisian age crops out in the Aghdarband erosional window in NE the northwestern part of Iran and is the second unit of the Aghdarband Group. The lower contact with the Sefidkuh Formation is gradational, while the upper contact with the Sina Formation is erosional. Three stratigraphic sections were measured with the following thicknesses: at Nazarkardeh (type locality 46.5 m), Kalbast 1 (23.5 m) and Kalbast 2 (28 m) and 80 samples were collected. Petrography studies led to the identification of 8 carbon ates and 2 pyroclastic lithofacies. Based on lithofacies analysis, this formation may have been deposited in a homocline carbonate ramp within a fore arc basin. Sequence stratigraphy analysis led to the recognition of a third order depositional sequence in all measured sections bounded by sequence boundaries type II at the base and type I at the top. The interpreted sea level curve in the study area can be correlated with the worldwide sea level curve, and regional subsidence led to the deposition of several small scale cycles. We hope this information can be used in the reconstruction of Triassic paleogeography of Iran and other parts of the world. پرونده مقاله -
دسترسی آزاد مقاله
336 - Variscite occurrence in Kushk deposit, Bafg (Yazd Province)
Shahrzad Sherafat Esmat Mohammady Nasab Mohammadali Mackizadeh Mahnaz KhodamiKushk Deposit is located in the Central Iran tectonic zone and is a part of the Bafg block (Bafg-Saghand Belt). öDezu Formation in the Kushk area are widespread occurrence The Dezu Formation in the Kushk area is of widespread occurrence and includes terrigenous, ca چکیده کاملKushk Deposit is located in the Central Iran tectonic zone and is a part of the Bafg block (Bafg-Saghand Belt). öDezu Formation in the Kushk area are widespread occurrence The Dezu Formation in the Kushk area is of widespread occurrence and includes terrigenous, carbonate and volcanic rocks. The black shale, which belongs to the Dezu Formation hosts Pb-Zn mineralization (Galena, Pyrite, Sphalerite). Variscite is formed generally as nodules, open space filling and veinlets in ore bearing parts of deposit. In supergene environment, oxidation of sulphide minerals releases H2SO4 bearing fluids. The leaching of Al(OH)3 and phosphates from the host rock in acidic environment and reactions between them produce Variscite. پرونده مقاله -
دسترسی آزاد مقاله
337 - Biostratigraphy of the sediments of Talezang Formation in southwestern Lorestan
Mehdi SafdariThe Talezang Formation is especially extensively outcropped in southwestern Lorestan. It is lying conformably on the Amiran Clastic Formation and its upper boundary contacts the Kashkan Red Siltstone Formation. In the type section it is dated at Upper Paleocene to Middl چکیده کاملThe Talezang Formation is especially extensively outcropped in southwestern Lorestan. It is lying conformably on the Amiran Clastic Formation and its upper boundary contacts the Kashkan Red Siltstone Formation. In the type section it is dated at Upper Paleocene to Middle Eocene and is composed of limestone ranging from moderate beddings to massive form. Limestones of the selected sections are mostly sandy with sandstone and shale interbeds. Miscellanea Miscella, Miscellanea Minauta, Kathina sp., Lockhartia sp., Gavelinella sp. are the typical fossils which are defined in the selected sections of this Formation. The proposed age for the formation is dated at the Upper Paleocene – Iberian. پرونده مقاله -
دسترسی آزاد مقاله
338 - Microbiostratigraphy of the Taleh-Zang Formation, Lorestan Basin
Iraj Maghfouri MoghadamThe Taleh-Zang Formation is a predominantly carbonate lithostratigraphic unit that crops out in Lorestan sedimentary basin, southwestern Iran . Lorestan sedimentary basin, formed as a foreland basin in Central Zagros, is characterized by a relatively continuous Cretaceo چکیده کاملThe Taleh-Zang Formation is a predominantly carbonate lithostratigraphic unit that crops out in Lorestan sedimentary basin, southwestern Iran . Lorestan sedimentary basin, formed as a foreland basin in Central Zagros, is characterized by a relatively continuous Cretaceous to Miocene time. In this paper, the microbiostratigraphy of the Taleh- Zang Formation in seven measured stratigraphic sections (Taleh- Zang type section, Kialou, Veisian, Chenar, Ghalebi, Darabi and Chahr Zebr) are is discussed. In all sections, the lower and upper boundaries of the Taleh- Zang Formation with Amiran and Kashkan Formations are conformable. Microbiostratigraphic data mainly based on foraminifera indicate the Middle Paleocene to Late Paleocene for the Taleh- Zang Formation for Veisian and the Early to Late Paleocene at Ghalebi, Darabi and Chenar, the Middle Paleocene for For Chahr Z¹ebr, the Late Paleocene to the Middle Eocence at the type section and the Late Paleocene to Early Eocene at the Kialou section. پرونده مقاله -
دسترسی آزاد مقاله
339 - Depositional environment and sequence stratigraphy of the Fahliyan Formation: surface sections of Bidkhon and Khartang and subsurface sections of Nar-2 and west Aghar
Sara Maleki Khosro Khosrowtehrani Hossein Asilian Yagob LasemiThe Fahliyan Formation of the upper Khami Group(Lower Cretaceous) is composed of carbonate rocks. In order to study facies, depositional environment and sequence stratigraphy of the Fahliyan Formation in the southwest of Fars Basin, surface sections (Bidkhon in Assaluye چکیده کاملThe Fahliyan Formation of the upper Khami Group(Lower Cretaceous) is composed of carbonate rocks. In order to study facies, depositional environment and sequence stratigraphy of the Fahliyan Formation in the southwest of Fars Basin, surface sections (Bidkhon in Assaluyeh and Khartang anticlines) and subsurface sections (Nar-2 and West Aghar) have been studied. Field observations and petrographic studies indicate that the Fahliyan Formation deposited in four facies belts: tidal flat (A), lagoon (B), barrier(C) and open marine (D). Study of facies, their vertical and lateral changes and comparison with modern and ancient environments indicate that the Fahliyan Formation deposited in a Shelf carbonate platform with shallow environments. Sequence stratigraphy of the Fahliyan Formation in the area indicates on the existence of two depositional sequences (3rd-order cycles). In the studied sections, the lower and upper boundary of the first sequences and the top boundary of the second sequence are type 1 unconformity (SB1). پرونده مقاله -
دسترسی آزاد مقاله
340 - Microbiostratigraphy study of Kazhdumi and Sarvak Formations in north and north- east Shiraz
Vahid Ahmadi Khosro Khosrowtehrani Masih AfghahIn this research two stratigraphic sections entitled as Kuh-e Gadvan and Kuh-e Rahmat sections related to Kazhdumi and Sarvak Formations have been selected. The thickness of the sediments in these sections is 1000 m and they have been studied in 600 thin-sections. Consi چکیده کاملIn this research two stratigraphic sections entitled as Kuh-e Gadvan and Kuh-e Rahmat sections related to Kazhdumi and Sarvak Formations have been selected. The thickness of the sediments in these sections is 1000 m and they have been studied in 600 thin-sections. Considering the identified index Foraminifers in the studied sections such as the following taxons:Orbitolina sp. O. concave , Simplorbitolina cf. conolus, Mesorbitolina cf. texana, Hemicyclammina sigali, Ticinella madecassiana, Calcisphaerula innominata, Stomiosphaera sphaerica, Favusella washitensis, Rotalipora cf. balernaensis, Ticinella cf. raynaudi, Rotalipora cushmani, Rotalipora cf. greenhorensis, Nezzazata simplex, Nezzazata conica, Dicyclina cf. schlumbrgeri, Ticinella cf. primula, Ovalveolina cf. ovum, Praealveolina simplex, Cuneolina cf. pavonia, Heterohelix reussi, Pithonella perlonga, Dictyoconus arabicus. The age of studied sediments is lower Albian -upper Cenomanian. Also considering microbiostratigraphic studies, four biozones and one sub-zone have been recognized for identified Foraminifers in the studied sections. پرونده مقاله -
دسترسی آزاد مقاله
341 - Nannostratigraphy of Gurpi Formation in Dare- Shahr Section (SE Ilam)
فاطمه هادوی Mohammad mehdi Rasa EzadiNannofossils are good for biostratigraphy, since they are abundant, planktonic, rapidly evolving and largely cosmopolitan, especially in the Late Cretaceous. For these reasons and due to the lack of any precise paleontological study, the nannofossils of the Gurpi Format چکیده کاملNannofossils are good for biostratigraphy, since they are abundant, planktonic, rapidly evolving and largely cosmopolitan, especially in the Late Cretaceous. For these reasons and due to the lack of any precise paleontological study, the nannofossils of the Gurpi Formation were investigated in Dare-Shahr. This formation consists of marl and shale and two members (Lopha and Emam Hassan limestones). In this study, for the first time, 24 genera and 48 species of nannofossils were identified. According to the stratigraphic distribution of calcareous nannoplanktons, the study section is of Late Santonian to Early Danian age, corresponding to CC16-CC26 (Sissingh 1977) and NP1-NP2 (Martini 1971). The presence of Biantolithus sparsus, Cruciplacolithus primus, Micula prinsii, indicates that the K/T boundary continues and within the Gurpi Formation in the Dare-Shahr section. پرونده مقاله -
دسترسی آزاد مقاله
342 - Mahalanobis-Taguchi System-based criteria selection for strategy formulation: a case in a training institution
Seyed Ali Hadighi Navid Sahebjamnia Iraj Mahdavi Hadi Asadollahpour Hosna ShafieianThe increasing complexity of decision making in a severely dynamic competitive environment of the universe has urged the wise managers to have relevant strategic plans for their firms. Strategy is not formulated from one criterion but from multiple criteria in environ چکیده کاملThe increasing complexity of decision making in a severely dynamic competitive environment of the universe has urged the wise managers to have relevant strategic plans for their firms. Strategy is not formulated from one criterion but from multiple criteria in environmental scanning, and often, considering all of them is not possible. A list of criteria utilizing Delphi was selected by consultation with company experts. By reviewing the literature and strategy experts’ proposals, the list is then classified into five categories, namely, human resource, equipment, market, supply chain, and rules. Since all the criteria may not be necessary for the decision process, as they are eliminated in the early stage traditionally, it is important to identify the prime set of criteria, which is a subset of the original criteria and affects decision making. Utilizing these criteria, a Mahalanobis-Taguchi System-based tool was developed to facilitate the selection of a prime set of criteria, which is a subset of the original criteria for ensuring that only ineffective subcriteria are eliminated and the conditions are prepared for relevant strategy formulation. Mahalanobis distance was used for making a measurement scale to distinguish ineffective subcriteria from significant criteria in the environmental scanning stage. The principles of the Taguchi method were used for screening the important criteria in the system and generate the prime set of criteria for each category. One can use these criteria within each category instead of all criteria for the identification of a suitable institution in training. To validate the proposed approach, a case study has been conducted for 38 educational institutions in Iran. The results demonstrated the usefulness of the proposed approach. پرونده مقاله -
دسترسی آزاد مقاله
343 - Robust optimization of a mathematical model to design a dynamic cell formation problem considering labor utilization
Moghadaseh Vafaeinezhad Reza Kia Parisa Shahnazari-ShahrezaeiCell formation (CF) problem is one of the most important decision problems in designing a cellular manufacturing system includes grouping machines into machine cells and parts into part families. Several factors should be considered in a cell formation problem. In this چکیده کاملCell formation (CF) problem is one of the most important decision problems in designing a cellular manufacturing system includes grouping machines into machine cells and parts into part families. Several factors should be considered in a cell formation problem. In this work, robust optimization of a mathematical model of a dynamic cell formation problem integrating CF, production planning and worker assignment is implemented with uncertain scenario-based data. The robust approach is used to reduce the effects of fluctuations of the uncertain parameters with regards to all possible future scenarios. In this research, miscellaneous cost parameters of the cell formation and demand fluctuations are subject to uncertainty and a mixed-integer nonlinear programming model is developed to formulate the related robust dynamic cell formation problem. The objective function seeks to minimize total costs including machine constant, machine procurement, machine relocation, machine operation, inter-cell and intra-cell movement, overtime, shifting labors between cells and inventory holding. Finally, a case study is carried out to display the robustness and effectiveness of the proposed model. The tradeoff between solution robustness and model robustness is also analyzed in the obtained results. پرونده مقاله -
دسترسی آزاد مقاله
344 - Development of a cell formation heuristic by considering realistic data using principal component analysis and Taguchi’s method
Shailendra Kumar Rajiv Kumar SharmaOver the last four decades of research, numerous cell formation algorithms have been developed and tested, still this research remains of interest to this day. Appropriate manufacturing cells formation is the first step in designing a cellular manufacturing system. چکیده کاملOver the last four decades of research, numerous cell formation algorithms have been developed and tested, still this research remains of interest to this day. Appropriate manufacturing cells formation is the first step in designing a cellular manufacturing system. In cellular manufacturing, consideration to manufacturing flexibility and productionrelated data is vital for cell formation. The consideration to this realistic data makes cell formation problemvery complex and tedious. It leads to the invention and implementation of highly advanced and complex cell formation methods. In this paper an effort has been made to develop a simple and easy to understand/implement manufacturing cell formation heuristic procedure with considerations to the number of production and manufacturing flexibility-related parameters. The heuristic minimizes inter-cellular movement cost/time. Further, the proposed heuristic is modified for the application of principal component analysis and Taguchi’s method. Numerical example is explained to illustrate the approach. A refinement in the results is observed with adoption of principal component analysis and Taguchi’s method. پرونده مقاله -
دسترسی آزاد مقاله
345 - Developing a cellular manufacturing model considering the alternative routes, tool assignment, and machine reliability
Sayyed Mahdi Sadat Khorasgani Mahdi GhaffariThe cell formation (CF) is one of the most important steps in the design of a cellular manufacturing system (CMS), which it includes machines’ grouping in cells and part grouping as separate families, so that the costs are minimized. The various aspects of the problem s چکیده کاملThe cell formation (CF) is one of the most important steps in the design of a cellular manufacturing system (CMS), which it includes machines’ grouping in cells and part grouping as separate families, so that the costs are minimized. The various aspects of the problem should be considered in a CF. The machine reliability and the tool assigned to them are the most important problems which have to be modeled correctly. Another important aspect in CMS is material handling costs that they consist of inter-cell and intra-cell movement costs. Moreover, setup and tool replacement costs can be effective in CF decision making. It is obvious that CF cannot be completed without considering the number of demand. With considering of all of the above aspects, an extended linear integer programming is represented for solving the cell formation problem (CFP) in this study. The objective is to minimize the sum of inter-cell movement, intra-cell movement, tool replacement, machine breakdown, and setup costs. In the other terms, for states that cost of movement is higher than tool-changing cost, although a part can have the inter- and/or intra-cell movements, the model tries to find a solution which part is allocated to one cell and with changing the tools, processes of that part is completed. In addition, to validate the model and show its efficiency and performance, several examples are solved by branch and bound (B&B) method. پرونده مقاله -
دسترسی آزاد مقاله
346 - Constrained consumable resource allocation in alternative stochastic networks via multi-objective decision making
Seyed Saeid Hashemin Seyed Mohammad Taghi Fatemi GhomiMany real projects complete through the realization of one and only one path of various possible network paths. Here, these networks are called alternative stochastic networks (ASNs). It is supposed that the nodes of considered network are probabilistic with exclusive-o چکیده کاملMany real projects complete through the realization of one and only one path of various possible network paths. Here, these networks are called alternative stochastic networks (ASNs). It is supposed that the nodes of considered network are probabilistic with exclusive-or receiver and exclusive-or emitter. First, an analytical approach is proposed to simplify the structure of the network. This approach transforms the network into a simpler equivalent one. This paper discusses the constrained consumable resource allocation problem in an ASN. Many recent researchers apply heuristic and simulation methods to solve the constrained resource allocation in these problems. In this paper, we propose an analytical approach based on multi-objective modeling. The objective functions of this model are the cumulative distribution function of the completion time of ASN paths. These functions must be maximized within the desired network completion time. Lexicographic method is used to solve the proposed multi-objective model. The proposed method is illustrated by an example. پرونده مقاله -
دسترسی آزاد مقاله
347 - A multi-objective model for designing a group layout of a dynamic cellular manufacturing system
Reza Kia Hossein Shirazi Nikbakhsh Javadian Reza Tavakkoli-MoghaddamThis paper presents a multi-objective mixed-integer nonlinear programming model to design a group layout of a cellular manufacturing system in a dynamic environment, in which the number of cells to be formed is variable. Cell formation (CF) and group layout (GL) are c چکیده کاملThis paper presents a multi-objective mixed-integer nonlinear programming model to design a group layout of a cellular manufacturing system in a dynamic environment, in which the number of cells to be formed is variable. Cell formation (CF) and group layout (GL) are concurrently made in a dynamic environment by the integrated model, which incorporates with an extensive coverage of important manufacturing features used in the design of CMSs. Additionally, there are some features that make the presented model different from the previous studies. These features include the following: (1) the variable number of cells, (2) the integrated CF and GL decisions in a dynamic environment by a multi-objective mathematical model, and (3) two conflicting objectives that minimize the total costs (i.e., costs of intra and inter-cell material handling, machine relocation, purchasing new machines, machine overhead, machine processing, and forming cells) and minimize the imbalance of workload among cells. Furthermore, the presented model considers some limitations, such as machine capability, machine capacity, part demands satisfaction, cell size, material flow conservation, and location assignment. Four numerical examples are solved by the GAMS software to illustrate the promising results obtained by the incorporated features. پرونده مقاله -
دسترسی آزاد مقاله
348 - A genetic algorithm for a bi-objective mathematical model for dynamic virtual cell formation problem
Mostafa Moradgholi Mohammad Mahdi Paydar Iraj Mahdavi Javid JouzdaniNowadays, with the increasing pressure of the competitive business environment and demand for diverse products, manufacturers are force to seek for solutions that reduce production costs and rise product quality. Cellular manufacturing system (CMS), as a means to this e چکیده کاملNowadays, with the increasing pressure of the competitive business environment and demand for diverse products, manufacturers are force to seek for solutions that reduce production costs and rise product quality. Cellular manufacturing system (CMS), as a means to this end, has been a point of attraction to both researchers and practitioners. Limitations of cell formation problem (CFP), as one of important topics in CMS, have led to the introduction of virtual CMS (VCMS). This research addresses a bi-objective dynamic virtual cell formation problem (DVCFP) with the objective of finding the optimal formation of cells, considering the material handling costs, fixed machine installation costs and variable production costs of machines and workforce. Furthermore, we consider different skills on different machines in workforce assignment in a multi-period planning horizon. The bi-objective model is transformed to a single-objective fuzzy goal programming model and to show its performance; numerical examples are solved using the LINGO software. In addition, genetic algorithm (GA) is customized to tackle large-scale instances of the problems to show the performance of the solution method. پرونده مقاله -
دسترسی آزاد مقاله
349 - A stochastic model for the cell formation problem considering machine reliability
Bahman Esmailnezhad Parviz Fattahi Amir Saman KheirkhahThis paper presents a new mathematical model to solve cell formation problem in cellular manufacturing systems, where inter-arrival time, processing time, and machine breakdown time are probabilistic. The objective function maximizes the number of operations of each par چکیده کاملThis paper presents a new mathematical model to solve cell formation problem in cellular manufacturing systems, where inter-arrival time, processing time, and machine breakdown time are probabilistic. The objective function maximizes the number of operations of each part with more arrival rate within one cell. Because a queue behind each machine; queuing theory is used to formulate the model. To solve the model, two metaheurstic algorithms such as modified particle swarm optimization and genetic algorithm are proposed. For the generation of initial solutions in these algorithms, a new heuristic method is developed, which always creates feasible solutions. Both metaheurstic algorithms are compared against global solutions obtained from Lingo software’s branch and bound (B&B). Also, a statistical method will be used for comparison of solutions of two metaheurstic algorithms. The results of numerical examples indicate that considering the machine breakdown has significant effect on block structures of machine-part matrixes. پرونده مقاله -
دسترسی آزاد مقاله
350 - A hybrid method to find cumulative distribution function of completion time of GERT networks
S.S Hashemin S.M.T Fatemi GhomiThis paper proposes a hybrid method to find cumulative distribution function (CDF) of completion time of GERT-type networks (GTN) which have no loop and have only exclusive-or nodes. Proposed method is cre-ated by combining an analytical transformation with Gaussian qua چکیده کاملThis paper proposes a hybrid method to find cumulative distribution function (CDF) of completion time of GERT-type networks (GTN) which have no loop and have only exclusive-or nodes. Proposed method is cre-ated by combining an analytical transformation with Gaussian quadrature formula. Also the combined crude Monte Carlo simulation and combined conditional Monte Carlo simulation are developed as alternative methods of solution procedure. Then, through a comparative study made for different solution procedures, the superiority of hybrid method is indicated. Computing time and accuracy are considered as fundamental factors for comparison purposes. پرونده مقاله -
دسترسی آزاد مقاله
351 - A generalized implicit enumeration algorithm for a class of integer nonlinear programming problems
M.S Sabbagh M RoshanjooyPresented here is a generalization of the implicit enumeration algorithm that can be applied when the objec-tive function is being maximized and can be rewritten as the difference of two non-decreasing functions. Also developed is a computational algorithm, named linear چکیده کاملPresented here is a generalization of the implicit enumeration algorithm that can be applied when the objec-tive function is being maximized and can be rewritten as the difference of two non-decreasing functions. Also developed is a computational algorithm, named linear speedup, to use whatever explicit linear constraints are present to speedup the search for a solution. The method is easy to understand and implement, yet very effec-tive in dealing with many integer programming problems, including knapsack problems, reliability optimiza-tion, and spare allocation problems. To see some application of the generalized algorithm, we notice that the branch-and-bound is the popular method to solve integer linear programming problems. But branch-and-bound cannot efficiently solve all integer linear programming problems. For example, De Loera et al. in their 2005 paper discuss some knapsack problems that CPLEX cannot solve in hours. We use our generalized algo-rithm to find a global or near global optimal solutions for those problems, in less than 100 seconds. The algo-rithm is based on function values only; it does not require continuity or differentiability of the problem func-tions. This allows its use on problems whose functions cannot be expressed in closed algebraic form. The re-liability and efficiency of the proposed algorithm has been demonstrated on some integer optimization prob-lems taken from the literature. پرونده مقاله -
دسترسی آزاد مقاله
352 - Comparison of the performances of neural networks specification, the Translog and the Fourier flexible forms when different production technologies are used
R FekiThis paper investigates the performances of artificial neural networks approximation, the Translog and the Fourier flexible functional forms for the cost function, when different production technologies are used. Using simulated data bases, the author provides a compari چکیده کاملThis paper investigates the performances of artificial neural networks approximation, the Translog and the Fourier flexible functional forms for the cost function, when different production technologies are used. Using simulated data bases, the author provides a comparison in terms of capability to reproduce input demands and in terms of the corresponding input elasticities of substitution estimates. The results suggest that ANN provide a better approximation than other traditional functional forms only when a single technology is used. However, when elasticities of substitution are calculated, the Translog approximate batters the true technology in both single and mixed technology. پرونده مقاله -
دسترسی آزاد مقاله
353 - A multi agent method for cell formation with uncertain situation, based on information theory
N Javid A MakuiThis paper assumes the cell formation problem as a distributed decision network. It proposes an approach based on application and extension of information theory concepts, in order to analyze informational complexity in an agent- based system, due to interdependence bet چکیده کاملThis paper assumes the cell formation problem as a distributed decision network. It proposes an approach based on application and extension of information theory concepts, in order to analyze informational complexity in an agent- based system, due to interdependence between agents. Based on this approach, new quantitative concepts and definitions are proposed in order to measure the amount of the information in an agent, based on Shannon entropy and its complement in possibility theory, U uncertainty. The paper presents an agent-based model of production system as a graph composed of decision centers. The application of the proposed approach is in analyzing and assessing a measure to the production system structure efficiency, based on informational communication view. Information flow in cells and grouping algorithm are investigated in this paper. پرونده مقاله -
دسترسی آزاد مقاله
354 - An improved particle swarm optimization with a new swap operator for team formation problem
Walaa H. El-Ashmawi Ahmed F . Ali Mohamed A. TawhidFormation of effective teams of experts has played a crucial role in successful projects especially in social networks. In this paper, a new particle swarm optimization (PSO) algorithm is proposed for solving a team formation optimization problem by minimizing the commu چکیده کاملFormation of effective teams of experts has played a crucial role in successful projects especially in social networks. In this paper, a new particle swarm optimization (PSO) algorithm is proposed for solving a team formation optimization problem by minimizing the communication cost among experts. The proposed algorithm is called by improved particle optimization with new swap operator (IPSONSO). In IPSONSO, a new swap operator is applied within particle swarm optimization to ensure the consistency of the capabilities and the skills to perform the required project. Also, the proposed algorithm is investigated by applying it on ten different experiments with different numbers of experts and skills; then, IPSONSO is applied on DBLP dataset, which is an example for benchmark real-life database. Moreover, the proposed algorithm is compared with the standard PSO to verify its efficiency and the effectiveness and practicality of the proposed algorithm are shown in our results. پرونده مقاله -
دسترسی آزاد مقاله
355 - Stability Analysis Of 3-d Conventional Pallet Rack Structures With Semi-rigid Connections
Kamal M. Bajoria Keshav K. Sangle Rajshekar S. TalicottiThis paper describe the three dimensional finite element modeling and buckling analysis ofconventional pallet racking system with semi rigid connection. In this study threedimensional models of conventional pallet racking system were prepared using the finiteelement pro چکیده کاملThis paper describe the three dimensional finite element modeling and buckling analysis ofconventional pallet racking system with semi rigid connection. In this study threedimensional models of conventional pallet racking system were prepared using the finiteelement program ANSYS and finite element analysis carried out on conventional pallet rackswith the 18 types of column sections developed along with semi-rigid connections. Aparametric study was carried out to compare the effective length approach and the finiteelement method for accuracy and appropriateness for cold-formed steel frame design.Numerous frame elastic buckling analyses were carried out to evaluate the alignment chartand the AISI torsional-flexural buckling provisions. The parameters that influence the valueof Kx for column flexural buckling were examined in this study. The alignment chart and theAISI torsional-flexural buckling provisions, used to obtain the effective lengths and elasticbuckling load of members were also evaluated. Results showed that the elastic buckling loadobtained from the AISI torsional-flexural buckling provisions is generally conservativecompared to the results obtained from performing frame elastic buckling analysis. Resultsalso showed that, the effective length approach is more conservative than the finite elementapproach. پرونده مقاله -
دسترسی آزاد مقاله
356 - Identity and Foreign Policy
Ebrahim Anoosheh -
دسترسی آزاد مقاله
357 - اندازه گیری مقادیر ناچیز آترازین در نمونه های آبی با روش ریزاستخراج تشکیل حلال درجا به کمک حلال های سبز (مایعهای یونی) و سوانگاری مایعی با کارایی بالا
مهدی حسینی مهدیه چگنی وحید عزیزخانییک روش سریع، دقیق و حساس برگرفته از روش ریزاستخراج مایع-مایع همگن به نام ریزاستخراج تشکیل حلال درجا به کمک مایع های یونی به عنوان حلال و فاز استخراج کننده برای تجزیه مقادیر ناچیز آترازین در نمونه های آبی حقیقی به کارگرفته شد. فاز استخراج کننده، حلالی از خانواده مایع چکیده کاملیک روش سریع، دقیق و حساس برگرفته از روش ریزاستخراج مایع-مایع همگن به نام ریزاستخراج تشکیل حلال درجا به کمک مایع های یونی به عنوان حلال و فاز استخراج کننده برای تجزیه مقادیر ناچیز آترازین در نمونه های آبی حقیقی به کارگرفته شد. فاز استخراج کننده، حلالی از خانواده مایع های یونی به نام 1-اتیل-3-متیل ایمیدازولیم کلرید [Emim][Cl] بود که در آب امتزاج پذیر است و پس از برهم کنش با آنالیت و افزودن یون مخالف هگزافلوئوروفسفات [-PF6]، به مایع یونی امتزاج ناپذیر یعنی 1-اتیل-3-متیل ایمیدازولیم هگزافلوئوروفسفات [Emim][PF6] تبدیل می شود. در ابتدا و حین فرایند استخراج آنالیت از فاز آبی، به دلیل عدم وجود مرز مشترک بین فاز آبی و آلی، کارایی استخراج بیشینه مقدار است. پس از انجام فرایند استخراج، به منظور جداسازی دو فاز از هم و سنجش مقدار آنالیت استخراج شده، به دلیل تشکیل مایع یونی غیرقابل امتزاج در آب، جداسازی فازها از هم امکان پذیرمی شود. تاثیر عامل های متفاوت تجزیه ایی بر مقدار کارایی استخراج مانند pH محلول نمونه حاوی آنالیت، مقدار مایع یونی، مدت استخراج و مقدار یون مخالف بررسی و مقدارهای بهینه تعیین شدند. ویژگی های روش مانند حد تشخیص (LOD)، حد کمی (LOQ)، انحراف استاندارد نسبی (RSD) و گسترده دینامیکی خطی (LDR) به ترتیب 12/3ppt, 6/1µgl-1,1/78µgl-1و 5 تا µgl-11500 به دست آمدند. روش به طور موفقیت آمیز برای استخراج و تعیین مقدار مقادیر ناچیز آترازین در چندین نمونه آبی حقیقی به کاربرده شد. اندازه گیری آترازین با روش حساس سوانگاری مایعی با کارایی بالا انجام شد. پرونده مقاله -
دسترسی آزاد مقاله
358 - تعیین شرایط تعادل ترمودینامیکی تشکیل هیدرات گازی اتان و هیدرات گازی پروپان با روش سریع و مستقیم
اکبر ایراندوخت حسین بریجانیاندر این پژوهش، یک روش سریع و مستقیم برای تعیین شرایط تعادلی هیدرات گازی ارایه شده است. آزمایش ها با گاز اتان و پروپان و آب مقطر در یک سامانه واکنشگاهی فشار بالا PARR انجام شد. فشار تعادلی تشکیل هیدرات گازی اتان در دما های 2، 4، 6، 8، 10، 12 و C° 14 و برای فشار تعادلی چکیده کاملدر این پژوهش، یک روش سریع و مستقیم برای تعیین شرایط تعادلی هیدرات گازی ارایه شده است. آزمایش ها با گاز اتان و پروپان و آب مقطر در یک سامانه واکنشگاهی فشار بالا PARR انجام شد. فشار تعادلی تشکیل هیدرات گازی اتان در دما های 2، 4، 6، 8، 10، 12 و C° 14 و برای فشار تعادلی هیدرات گازی پروپان در 2، 4 و C° 5 به صورت تجربی به دست آمد. مقدار عددی درصد انحراف مطلق نتیجه های به دست آمده از این روش با نتیجه های تجربی Deaton-Frostو سایر پژوهشگران و نیز با نتیجه های به دست آمده از پیش بینی نرم افزار AQUAlibrium برای هیدرات گازی اتان به ترتیب معادل 56/4، 79/4 و 27/3 است. همچنین، مقدار عددی درصد انحراف مطلق نتیجه های به دست آمده از این روش با نتیجه های Deaton-Frost و نتیجه های پیش بینی نرم افزار HWU برای هیدرات گازی پروپان به ترتیب 17/10 و 31/13 به دست آمد. پرونده مقاله -
دسترسی آزاد مقاله
359 - تشکیل پیوند آمیدی با اعمال شوک گرمایی و شناسایی سریع فراورده با طیفسنجی تحرک یونی
فرشاد میرزایی ولدی حامد بهرامی منیژه توضیحیپیوند آمیدی ستون فقرات پپتیدهای زیستی مهم و همچنین، پروتئین ها را تشکیل می دهد. گروه آمیدی در بسیاری از ترکیب های دارویی موجود است. بنابراین، توسعه کارآمد روش های تشکیل پیوند آمیدی همچنان از نظر علمی موردتوجه است. در این پژوهش روشی ساده برای تهیه مستقیم و بدون حلال آمید چکیده کاملپیوند آمیدی ستون فقرات پپتیدهای زیستی مهم و همچنین، پروتئین ها را تشکیل می دهد. گروه آمیدی در بسیاری از ترکیب های دارویی موجود است. بنابراین، توسعه کارآمد روش های تشکیل پیوند آمیدی همچنان از نظر علمی موردتوجه است. در این پژوهش روشی ساده برای تهیه مستقیم و بدون حلال آمیدها و شناسایی بلادرنگ فراورده معرفی شده است. ابتدا طیف تحرک یونی نمک پریندوپریل ترشیو‎بوتیل‎آمین به دست آمد و گونه های یونی به‎دست آمده از تبخیر و یونش این نمک در تخلیه کرونا شناسایی شد. در ادامه با اعمال شوک گرمایی در دمای C° 400 به نمک پریندوپریل ترشیو‎بوتیل‎آمین و ثبت بی‎درنگ طیف تحرک یونی، تشکیل فراورده ای با جرم بیشتر از پریندوپریل پروتونه‎شده به اثبات رسید. با بررسی تغییر شدت پیک‎ها در طیف های تحرک یونی با گذشت زمان و همچنین، پیش بینی جرم گونه های یونی در طیف تحرک یونی، ماهیت فراورده جدید به‎عنوان یک ترکیب آمیدی مشخص شد. کارایی روش دو مرجعی برای به‎کارگیری معادله ارتباط جرم و تحرک یونی برای پیش‎بینی جرم گونه های یونی در طیف‎سنجی تحرک یونی به اثبات رسید. از نتیجه های این پژوهش مشخص شد که اعمال شوک گرمایی به نمک پریندوپریل اربومین افزون بر تخریب نمونه، می تواند موجب ایجاد فراورده های جدید از راه تشکیل پیوند آمیدی شود. پرونده مقاله -
دسترسی آزاد مقاله
360 - Survey of Integrated and Non-Integrated Formulae on Suspended Sediment Load; Case Study: Soolegan River, North Karoon Basin, Iran
N Sedaei A KavianPredictions of suspended sediment load for Soolegan River, Iran using selected empirical equ-ations were made based on 355 data sets. Data include flow discharges from 3.11 m3/s to 43.81 m3/s, flow velocities from 0.22 m/s to 1.03 m/s, and flow depths from 0.5 to 1.03 m چکیده کاملPredictions of suspended sediment load for Soolegan River, Iran using selected empirical equ-ations were made based on 355 data sets. Data include flow discharges from 3.11 m3/s to 43.81 m3/s, flow velocities from 0.22 m/s to 1.03 m/s, and flow depths from 0.5 to 1.03 m. Equations of Einstein (1950), Bagnold (1966), Toufalleti (1968), Brooks (1963), Chang-Simons-Richardson(1965),Lane-Kalinske (1941) are used in the evaluations. Selection was made based on the purpose of this paper, illustrating the performance of six suspended sedi-ment formulas in Soolegan River; the integrated formulae were also evaluated. Graphical comparisons of the calculated and measured transport rates are shown. The accuracy and re-liability of these formulas are verified. Results of the evaluations showed that Brooks had the best estimations while the same results for integrated formulae showed that Lane –kalinske and Bagnold estimated the suspended sediment discharges better than integrated and non-integrated ones. پرونده مقاله -
دسترسی آزاد مقاله
361 - Summative and Formative Feedback and Gender: A Study of EFL Learners’ Speaking Performance
Khodaverdi Alizadeh Nasser Ghafoori Touran AhourThere has been a long literature on the linguistic differences found in the language men and women speak, but there have not been enough discussions about the reasons why such differences exist. To recognize some major differences a study of feedback could be suggested. چکیده کاملThere has been a long literature on the linguistic differences found in the language men and women speak, but there have not been enough discussions about the reasons why such differences exist. To recognize some major differences a study of feedback could be suggested. In EFL classes feedback is very important specially to enhance speaking proficiency of the learners, but it seems that this has not been investigated properly in foreign language teaching context in Iran. The aim of this study was to investigate the differences between the Iranian EFL learners’ quality of performance across genders. This study examined the use of formative and summative feedback among 80 female and male EFL learners in a language institute in Tabriz, Iran in 2019 employing a quasi-experimental method. Because a pre-test and post-test method were applied to two groups of students to investigate the results of the feedbacks, an independent t-test and a double test method were used to analyze the amount of effectiveness of each of the feedback methods under investigations among genders and also a one-way variance analysis has been administered using SPSS22 software. Results of this study showed that both genders have had a fairly close results regarding the performance quality of speaking among EFL students in Iran. Considering the results, it can be suggested that both male and female students can have equal achievements in learning English considering their performances in speaking. پرونده مقاله -
دسترسی آزاد مقاله
362 - No Negotiation, Limited Negotiation, and Extended Negotiation in Proactive Focus on Form in Vocabulary Acquisition
Parviz Maftoon Bahram BagheriNegotiation, as an interactional strategy and proactive focus on form (FoF) have received increased attention in second language research. The combination of negotiation and proactive FoF, however, has not been examined in relation to L2 vocabulary learning. To address چکیده کاملNegotiation, as an interactional strategy and proactive focus on form (FoF) have received increased attention in second language research. The combination of negotiation and proactive FoF, however, has not been examined in relation to L2 vocabulary learning. To address this gap, the present study investigated how the amount of negotiation and proactive FoF impacted learners’ vocabulary knowledge development. The participants were 100 adult learners of English, assigned to three experimental groups and one control group. The three experimental groups investigated three categories of no negotiation, limited negotiation, and extended negotiation in proactive FoF. A pretest-posttest design was employed in order to detect any improvement in participants’ vocabulary knowledge components, consisting of collocations, synonyms, derivation, and hyponymy. The results revealed that (a) participants’ vocabulary knowledge significantly improved in all the experimental groups, (b) extended negotiation was significantly superior to limited negotiation, and limited negotiation was significantly superior to no negotiation in proactive FoF, and (c) derivation was the least affected vocabulary component by the treatment. پرونده مقاله -
دسترسی آزاد مقاله
363 - A Comparative Study of Transposition in English Translations of Gulistan of Saadi: A Case Study of Thackston’s and Rehatsek’s Translation
Niloofar Nakisaei Azadeh Nemati Samad Mirza SuzaniThis study aimed at investigating transposition in English translations of Gulistan of Saadi. To this aim, a mixed methods design was utilized. The corpus of this study consisted of 20 poems and 20 proses along with their English translations by Thackston (2008) and Reh چکیده کاملThis study aimed at investigating transposition in English translations of Gulistan of Saadi. To this aim, a mixed methods design was utilized. The corpus of this study consisted of 20 poems and 20 proses along with their English translations by Thackston (2008) and Rehatsek (2010). To collect the data, first, the researcher and an experienced translator explored the translations carefully to identify the cases of trans- position. Then, the identified cases of transposition were categorized based on Whittlesey’s (2012) framework. Next, the frequency and percentage of different types of transposition were calculated. Final- ly, chi-square test was run to investigate the difference between the two translations in terms of transpos- ing form and content. The results of data analysis showed 10 and 14 cases of transposing the form in the translations by Rehatsek and Thackston, respectively. The content has been modified in 30 cases of translation by Rehatsek and in 26 cases of translation by Thackston. Thackston revealed more transpositions of form while Rehatsek revealed more transpositions of content in English translations of Gulistan of Saadi. There was no significant difference between the two translations in terms of transposing form and content. پرونده مقاله -
دسترسی آزاد مقاله
364 - مقایسه حقوق زنان در اسلام و کنوانسیون رفع هر گونه تبعیض علیه زنان
معصومه اخلاق پسند مریم ابن تراب سید حسین سجادیتدوین کنوانسیون رفع تبعیض علیه زنان یکی از نتایج مطالعات دنیای غرب پیرامون مسالهی زنان است. عمدهترین ابزار تدوینکنندگان کنوانسیون، رفع تبعیض در جهت محو کلیشه های جنسیتی سنتی موجود و انکار تفاوتهای میان زن و مرد و در نتیجه ایجاد حقوق یک سان است. در این صورت مفاد این چکیده کاملتدوین کنوانسیون رفع تبعیض علیه زنان یکی از نتایج مطالعات دنیای غرب پیرامون مسالهی زنان است. عمدهترین ابزار تدوینکنندگان کنوانسیون، رفع تبعیض در جهت محو کلیشه های جنسیتی سنتی موجود و انکار تفاوتهای میان زن و مرد و در نتیجه ایجاد حقوق یک سان است. در این صورت مفاد این کنوانسیون با حقوق اسلامی انطباق کامل ندارد و این خود موجب چالش هایی در زمینه های مختلف اجتماعی حقوقی و فرهنگی شده است. این پژوهش به هدف مقایسه حقوقی میان حقوق برخاسته از مواد کنوانسیون و حقوق اسلامی صورت گرفته است، تا پاسخی درخور برای رفع چالش های موجود در این زمینه باشد. بر اساس بررسی های به عمل آمده به روش تحلیلی توصیفی این نتیجه به دست آمد که در کنار اشتراک ماهوی انسانی زن و مرد، این دو به صورت ذاتی و تکوینی تفاوتهای متعددی با هم دارند، از این رو طبیعی است از نظر اجتماعی و در حوزهی تنظیم قواعد حقوقی نیز نباید توقع همانندی آنها را داشت.حقوق اسلام در بسیاری از قواعد و قوانین خود، با بندهای کنوانسیون مطروحه همخوانی دارد. حق حیات، حق آزادی، کرامت انسانی، حق اشتغال و حقوق سیاسی نظیر حق شرکت در انتخابات ، حقوق اجتماعی، حق بر آموزش و سلامت از مواردی هستند که از دیر باز در دین مبین اسلام مورد توجه بوده است. اما در برخی موارد بر اساس ویژگی های آفرینش زنان و مردان و مسئولیت های مبتنی بر آن، حقوق و قواعد ایشان، متفاوت است. بنابراین تساوی در کنوانسیون رفع تبعیض علیه زنان بر خلاف حقوق اسلام ، بر مبنای عدالت و فطرت پایه گذاری نشده است و این خود به نوعی تبعیض است . پرونده مقاله -
دسترسی آزاد مقاله
365 - بازخوانی نظریۀ تشکیل دولت ابنخلدون بهمثابۀ نظریۀ اصلاح دینی در خوانش سید فرید العطاس (مطالعۀ موردی مراکش)
فاطمه امین رعیا جزه علی مرادخانی سید حسین سجادی سید جواد میر مینقدغدغۀ اصلی ابنخلدون هم در مقدمه و هم در العبر شرح چگونگی تشکیل و زوال دولت در شرق و غرب جهان اسلام بوده که تلاش کرده است آن را براساس نبرد دوری میان دو جامعۀ بدوی و حضری تبیین کند. فرید العطاس به منظور بسط نظریۀ ابنخلدون، آن را بهمثابۀ نظریۀ اصلاح دینی مسلمانان معرفی چکیده کاملدغدغۀ اصلی ابنخلدون هم در مقدمه و هم در العبر شرح چگونگی تشکیل و زوال دولت در شرق و غرب جهان اسلام بوده که تلاش کرده است آن را براساس نبرد دوری میان دو جامعۀ بدوی و حضری تبیین کند. فرید العطاس به منظور بسط نظریۀ ابنخلدون، آن را بهمثابۀ نظریۀ اصلاح دینی مسلمانان معرفی کرده است. از نظر او مراکش، یک مورد تاریخی است که اصلاح دینی را تجربه کرده است. نظریۀ ابنخلدون فاقد نظام اقتصادی است؛ از اینرو، فرید العطاس تلاش کرده شیوههای تولید را از کارل مارکس اخذ و در نظریۀ ابنخلدون ادغام کند. هدف این پژوهش، تبیین نظریۀ تشکیل دولت ابنخلدون بهمثابۀ نظریۀ اصلاح دینی مسلمانان در خوانش فرید العطاس است که به همین منظور به مطالعۀ سه سلسلۀ متوالی مراکش _ مرابطون، موحدون و مرینیان _ پرداخته است. بنابر یافتههای پژوهش که به شیوۀ توصیفی _ تحلیلی بهدست آمده، فرید العطاس بهجای تکرار محض اطلاعاتی که از مقدمه بهدست میآید، کاربردی نظری از دیدگاه ابنخلدون ارائه داده است. پرونده مقاله -
دسترسی آزاد مقاله
366 - بیان ناپذیری تجربه عرفانی با نظر به آرای مولانا در باب «صورت» و «معنا»
منظر سلطانی سعید پورعظیمیبیان ناپذیری تجربه عرفانی امری است که صوفیان با استعانت از رمزها و تمثیل های متعدد و یا بهصراحت از آن سخن گفته‎اند. به عقیده آنها، عظمت و کمال معنی به اندازه ای است که صورت ظاهر به هیچرو نمی تواند آن را بیان کند. زبان عرفانی در بطن خود تناقض صورت و معنی را بازتا چکیده کاملبیان ناپذیری تجربه عرفانی امری است که صوفیان با استعانت از رمزها و تمثیل های متعدد و یا بهصراحت از آن سخن گفته‎اند. به عقیده آنها، عظمت و کمال معنی به اندازه ای است که صورت ظاهر به هیچرو نمی تواند آن را بیان کند. زبان عرفانی در بطن خود تناقض صورت و معنی را بازتاب می دهد؛ تناقضی که از ادراک صوفیان نسبت به راز سرچشمه می گیرد. رازی در عمق معنی نهفته است که زبان نمی تواند آن را بیان کند و به مخاطب انتقال دهد. صوفی نیز می کوشد این راز را پنهان نگاه دارد. وسوسه بیان معنی از یک سو، و اصرار بر ناتوانی زبان در بیان معنی از سوی دیگر، بنیان بخش عمده ای از میراث سخن صوفیه است. بحث صورت و معنی در آثار مولانا نیز به شکلی گسترده مطرح شده است. تأکید مولانا بر محال بودن بیان تجربه عرفانی، سرانجام او را به ساحت خاموشی کشانده است. مقاله حاضر به این موضوع اختصاص دارد. پرونده مقاله -
دسترسی آزاد مقاله
367 - بررسی و تحلیل داستان دژ هوشربا براساس نظریات یونگ
سهیلا نمازعلیزادهداستان دژ هوشربا یا قلعه‎ ذاتالصور آخرین حکایت بلند و ناتمام مثنوی معنوی است. موضوع این داستان تلاش سه شاهزاده‎ جوان‎ برای وصال با شاهزادهخانم چینی است. در این مقاله برآنیم تا با روش توصیفی- تحلیلی و کتابخانه ای، برخی نمادهای کهنالگویی در این داستان را ب چکیده کاملداستان دژ هوشربا یا قلعه‎ ذاتالصور آخرین حکایت بلند و ناتمام مثنوی معنوی است. موضوع این داستان تلاش سه شاهزاده‎ جوان‎ برای وصال با شاهزادهخانم چینی است. در این مقاله برآنیم تا با روش توصیفی- تحلیلی و کتابخانه ای، برخی نمادهای کهنالگویی در این داستان را براساس اندیشه های‎ کارل گوستاو یونگ درباره کهن الگو تفسیر کنیم. این پژوهش نشان می دهد که امر مقدس وصال در این داستان تعبیری عرفانی از خویشتنیابی برای نائل آمدن به جایگاه رفیع انسان کامل است. ﻣﻌﺸﻮق ﯾﺎ زن در این داستان ﺗﺼﻮﯾﺮی از آنیما یا ﮐﻬﻦالگوی ﻣﺎدﯾﻨﻪ روان اﺳـﺖ ﮐـﻪ ﺑـﻪ ﮔﻮﻧـﻪای رؤﯾﺎﯾﯽ ظاهر میشود تا در مراحل دشوار سفر، قهرمان وجوه تاریک خویشتن را بشناسد و جسم و جان را از هرگونه تعلقات مادی و خودخواهی تطهیر نماید؛ به عبارت دیگر، شاهزاده خانم چینی جنبه ناهشیار شخصیت شاعر و سه شاهزاده جوان است که در قالب زنی باوقار و نجیب ظاهر می‎شود تا آنها را برای یکی شدن با حقیقت ازلی و ابدی راهبری کند. پرونده مقاله -
دسترسی آزاد مقاله
368 - مدیریت تقسیم - توجه و افزونگی در محیطهای یادگیری چند رسانه ای: شواهدی بر سامانه های پردازش دوگانه در حافظه کاری
حمیدرضا حسن آبادی زهره سرمد محمود قاضی طباطباییهدف مطالعه حاضر، اصلاح اثرهای تقسیم توجه و افزونگی در محیطهای یادگیری چند رسانهای از طریق ارائه متن بهصورت شنیداری یا یکپارچهـ سازی فیزیکی منابع چندگانه اطلاعات بود. بدین منظور، موضوع شکلـ گیری صاعقه از طریق یک انیمیشن به دانشآموزان دوره راهنمایی (51 = n) ارائه ش چکیده کاملهدف مطالعه حاضر، اصلاح اثرهای تقسیم توجه و افزونگی در محیطهای یادگیری چند رسانهای از طریق ارائه متن بهصورت شنیداری یا یکپارچهـ سازی فیزیکی منابع چندگانه اطلاعات بود. بدین منظور، موضوع شکلـ گیری صاعقه از طریق یک انیمیشن به دانشآموزان دوره راهنمایی (51 = n) ارائه شد. همزمان با انیمیـشن، یک گروه متنبر- صفحهای را نـزدیک انیمیشن دیدنـد (گروه موجـز متـنی)، گروه دوم گفتـاری را شنیدند (گروه موجز گفتـاری) و گـروه سوم هم متـن و هم گفتـار را دریـافت کردند (گروه افزونـه). یادگیری فرایـند شکلگیری صاعقـه از طریق آزمونهای نگهداری و انتقال اندازهگیری شد. عملکرد بهتر گروه گفتاری نسبت به گروه متنی در میزان نگهداری اطلاعات، اثر وجه حسی را آشکار کرد. اما عملکرد ضعیفتر دانشآمـوزان گروه افزونه در آزمون انتقال نسبـت به دانشآموزانی که قالبهای موجز دریافت کرده بودند، اثر افزونـگی را آشکار ساخت. نتایج بر پایه الگوی پردازش دوگانه حافظـه کاری و ظرفیت محدود مجرای دیداری تبیین شدند. استلزامهای نظری و عملی یافتهها مورد بحث قرار گرفتند. پرونده مقاله -
دسترسی آزاد مقاله
369 - نسخة فارسی مقیاسهای اعتباری فرم کوتاه MMPI
سید محمود میر زمانی رضا کرمی نیا سید حسین سلیمی محمد علی بشارتهدف پژوهش بررسی مقیاسهای اعتباری فرم کوتاه MMPI به زبان فارسی بود . 279 زن و مرد در چهار گروه در یک بیمارستان آزمون شدند: 1)120 متقاضی شغل که برای معاینه های پزشکی استخدامی مراجعه کرده بودند؛ 2)32 مرد که برای تعیین درصد جانبازی، ازکارافتادگی و مشکلات جسمانی به منظور مع چکیده کاملهدف پژوهش بررسی مقیاسهای اعتباری فرم کوتاه MMPI به زبان فارسی بود . 279 زن و مرد در چهار گروه در یک بیمارستان آزمون شدند: 1)120 متقاضی شغل که برای معاینه های پزشکی استخدامی مراجعه کرده بودند؛ 2)32 مرد که برای تعیین درصد جانبازی، ازکارافتادگی و مشکلات جسمانی به منظور معافیت پزشکی از خدمت سربازی و یا دریافت حمایتهای اقتصادی و اجتماعی ارجاع داده شده بودند؛ 3) 68 بیمار سرپایی که به دلایل مشکلات روانشناختی مراجعه کرده بودند؛ 4) 59 فرد عادی که بطور تصادفی از میان کارکنان بیمارستان و ملاقات کنندگان انتخاب شده بودند. مقایسة چهار گروه نشان داد: گروه اول به طور معناداری در مقیاسهای اعتباری ”K“ و ”L“ نمره های بالاتر و در مقیاسهای بالینی نمره های پایینتری کسب کردند و سعی داشتند خود را بهتر از آنچه بودند نشان دهند. در مقابل، گروه دوم در مقیاس اعتباری F نمره بالاتر، در مقیاسهای اعتباری”K“ و ”L“ نمره های پایینتر و در مقیاسهای بالینی نمره های بالاتری به دست آوردند . آنان سعی داشتند خود را بدتر از آنچه بودند نشان دهند. بنابراین، این امر برای متخصصین بالینی حائز اهمیت است که غیر از نمره های مقیاسهای اعتباری و بالینی نیت آزمون شوندگان را در نظر بگیرند. پرونده مقاله -
دسترسی آزاد مقاله
370 - ویژگیهای روانسنجی نسخةپیشدبستانی سیاهة درجهبندی رفتاری کنشوری اجرایی (فرم معلم)
علی مشهدی جعفر حسنی زرین برعرفان پریسا نجفیگل شراره دانشورهدف پژوهش حاضر، تعیین اعتبار، روایی و ساختار عاملی نسخه پیش¬دبستانی سیاهه درجه¬بندی رفتاری کنش¬وری اجرایی (فرم معلم) بود. سیاهه کنشهای اجرایی 390 کودک 2 تا 5 ساله مقطع پیش دبستانی شهر مشهد در سال تحصیلی 91-90 به شیوه نمونه¬برداری تصادفی چند مرحله‎ای چکیده کاملهدف پژوهش حاضر، تعیین اعتبار، روایی و ساختار عاملی نسخه پیش¬دبستانی سیاهه درجه¬بندی رفتاری کنش¬وری اجرایی (فرم معلم) بود. سیاهه کنشهای اجرایی 390 کودک 2 تا 5 ساله مقطع پیش دبستانی شهر مشهد در سال تحصیلی 91-90 به شیوه نمونه¬برداری تصادفی چند مرحله‎ای از طریق معلمان گردآوری شد. اعتبار مقیاس از طریق همسانی درونی و همبستگی¬های مجموعه مادّه مورد بررسی قرار گرفت. همچنین برای بررسی روایی مقیاس از تحلیل عاملی و روایی همزمان استفاده شد. ضرایب آلفای کرونباخ و همبستگی¬های مجموعه مادّه بیانگر اعتبار رضایت‎بخش سیاهه و زیرمقیاس¬های آن بود. تحلیل عاملی اکتشافی و تأییدی بیانگر دو الگوی پنجعاملی (بازداری، تغییر، مهار هیجانی، حافظه کاری و برنامه¬ریزی/سازمان¬دهی) و سهعاملی (خودمهارگری بازداری، انعطافپذیری و فراشناخت) بود. افزون بر این، روایی همگرای مقیاس با سیاهه فهرست رفتاری کودکان مطلوب بود. نسخه پیشدبستانی سیاهه درجه¬بندی رفتاری کنش¬وری اجرایی (فرم معلم) ابزاری مفید جهت سنجش کنش¬های اجرایی در کودکان پیش دبستانی است و می¬تواند در پژوهش‎های روان¬شناختی و موقعیت¬های بالینی در ایران به کار گرفته شود. پرونده مقاله -
دسترسی آزاد مقاله
371 - گسترش یک مقیاس راهبردهای مقابلهای در دانشجویان : دو فرم موازی
پریرخ دادستان علی عسگری مرضیه حاجی زادگانبه منظور گسترش یک ابزار اندازهگیری راهبردهای مقابلهای دانشجویان با دو فرم موازی، تعداد 230 گویه طی سه مرحله پژ‍وهشی، تجربی و نهایی، تهیه و در گروه نمونهای به تعداد 1145 دانشجو (496 دختر و 649 پسر) که با روش نمونهبرداری چند مرحلهای انتخاب شدند، اجرا شد. پس از چن چکیده کاملبه منظور گسترش یک ابزار اندازهگیری راهبردهای مقابلهای دانشجویان با دو فرم موازی، تعداد 230 گویه طی سه مرحله پژ‍وهشی، تجربی و نهایی، تهیه و در گروه نمونهای به تعداد 1145 دانشجو (496 دختر و 649 پسر) که با روش نمونهبرداری چند مرحلهای انتخاب شدند، اجرا شد. پس از چندین بار تحلیل عاملی اکتشافی با چرخش متمایل (در دو مرحله پژوهش) تعداد 100 گویه (با قدرت تشخیص بالاتر از 4/0 و بار عاملی ناب و بالاتر از 35/0) انتخاب شد که هشت راهبرد مقابلهای 1) حمایت اجتماعی، 2) حمایت معنوی (مذهبگرایی)، 3) بازسازی شناختی، 4) حل مسئله، 5) تفکر آرزومندانه، نگرانی، 6) انحراف توجه (بدنی و هیجانی)، 7) اجتناب شناختی و 8) تسلیم را متمایز میساخت و بر روی هم 33 درصد واریانس را تبیین میکرد. سپس دو فرم 50 گویهای براساس شباهت در محتوا و همسانی بار عاملی به گونهای انتخاب شدند که ضریب همبستگی هشت عامل آنها معنادار و تفاوت میانگینهای آنها غیرمعنادار بود. ضرایب اعتبار (همسانی درونی) و خطای استاندارد اندازهگیری دو فرم به ترتیب برابر با 910/0، 60/3 و 913/0، 61/3 بود. تحلیل عاملی راهبردهای مقابلهای دو فرم روی هم، وجـود عوامل هشتگانه را تأیـید کرد. مشخصههای روانسنجـی عاملهای هشتگانه دو فرم محاسبه شد و مبانی نظری عاملها مورد بحث قرار گرفت. پرونده مقاله -
دسترسی آزاد مقاله
372 - ساختار عاملی تأییدی و اعتباریابی پرسشنامه تعارض والدـنوجوان(فرم نوجوان)
ایرج مختار نیا علی زاده محمدی مجتبی حبیبیهدف از این پژوهش تعیین ساختار عاملی تأییدی و اعتباریابی مقیاس تعارض والد‎ـ‎نوجوان در نمونهای از نوجوانان 13 تا 17 سال غیربالینی بود. روش پژوهش از نوع توصیفی و مقطعی و جامعه آماری آن، دانشآموزان دوره اول و دوره دوم متوسطه شهرستان قدس استان تهران بود که با استفا چکیده کاملهدف از این پژوهش تعیین ساختار عاملی تأییدی و اعتباریابی مقیاس تعارض والد‎ـ‎نوجوان در نمونهای از نوجوانان 13 تا 17 سال غیربالینی بود. روش پژوهش از نوع توصیفی و مقطعی و جامعه آماری آن، دانشآموزان دوره اول و دوره دوم متوسطه شهرستان قدس استان تهران بود که با استفاده از روش نمونهبرداری تصادفی چندمرحلهای، 748 نفر از آنها انتخاب شدند و به پرسشنامههای تعارض والد نوجوان (فرم نوجوان) اسدی یونسی (1390)، تعارض بین والدین گریچ، سید و فینچام (1992)، گزارشدهی مشکلات رفتاری آشنباخ (1991)، مقیاس رضایت خانوادگی السون (1995) و تعامل‎های خانوادگی بارنز و السون (1985) پاسخ دادند. نتایج تحلیل عاملی تأییدی، مدل 14 عاملی نسخه اصلی پرسشنامه تعارض والد‎ـ‎نوجوان را تأییدکرد؛ در بررسی روایی واگرا و ملاک، ضریب همبستگی پیرسون پرسشنامه تعارض والد‎ـ‎نوجوان با پرسشنامههای تعارض بین والدین، پرسشنامه گزارشدهی مشکلات رفتاری آشنباخ، مقیاس رضایت خانوادگی و تعامل‎های خانوادگی بین 21/0 تا 57/0 به دست آمد. همچنین به طور کلی بخش شدت تعارض پرسشنامه تعارض والد‎ـ‎نوجوان نسبت به بخش فراوانی تعارض والد‎ـ‎نوجوان، هم در شاخصهای تحلیل عاملی تأییدی و هم در مقادیر به‎دست‎آمده از همبستگی پیرسون برای بررسی روایی واگرا و ملاک، مطلوبتر بود. در بررسی اعتبار پرسشنامه، نتایج ضریب آلفای کرونباخ در بخش فراوانی تعارض 97/0 و در بخش شدت تعارض 96/0 و ضریب بازآزمایی به ترتیب 76/0 و 75/0 و رضایتبخش بود؛ بنابراین بر اساس نتایج به‎دست‎آمده از این پژوهش، پرسشنامه تعارض والد‎ـ‎نوجوان دارای ویژگیهای روانسنجی مناسب است و میتوان از آن را برای دستیابی به اهداف پژوهشی و ارزیابی خانوادهها در مشاوره خانواده استفاده کرد. پرونده مقاله -
دسترسی آزاد مقاله
373 - ارزیابی و مقایسۀ تأثیر جیرۀ آزمایشی با غذا های وارداتی و داخلی بر پاره ای از شاخص های رشد در قزل آلای رنگین کمان Oncorhynchus mykiss
حسین عمادی نسیم بهاران علی اصغر سعیدیبه منظور تولید یک جیرۀ غذایی مناسب برای پرورش ماهی قزل آلای رنگین کمان (Oncorhynchus mykiss)، رقابت با غذا های وارداتی و بررسی امکان جایگزینی این جیره به جای آن ها، فرمولاسیون جدیدی تدوین شد و با دو غذای وارداتی، یکی از فرانسه (تیمار A) و دیگری از ایتالیا (تیمار B)، و ی چکیده کاملبه منظور تولید یک جیرۀ غذایی مناسب برای پرورش ماهی قزل آلای رنگین کمان (Oncorhynchus mykiss)، رقابت با غذا های وارداتی و بررسی امکان جایگزینی این جیره به جای آن ها، فرمولاسیون جدیدی تدوین شد و با دو غذای وارداتی، یکی از فرانسه (تیمار A) و دیگری از ایتالیا (تیمار B)، و یک غذای داخلی (تیمار C) مقایسه گردید. 600 عدد بچه ماهی قزل آلا با میانگین وزن 3±37 گرم و طول 55/0±5/13 سانتی متر، طی دورۀ 127 روزه در 12 کانال پرورشی به ابعاد 80×150×440 سانتی متر، به صورت 4 تیمار که هر یک دارای سه تکرار بودند، با استفاده از این جیره ها پرورش یافتند. در پایان دوره، میانگین وزن، طول کل و افزایش وزن بدن در تیمار فرموله با سایر تیمارها، دارای اختلاف معنی دار بود (05/0P<)، که به ترتیب تیمار فرموله با 13/12±14/133 گرم، 75/0±21 سانتی متر و 20/6±49/191 گرم، بیشترین و تیمار C با 81/11±02/108 گرم، 75/0±83/19 سانتی متر و 90/17±99/126 گرم، کمترین مقادیر را داشتند. بالاترین درصد افزایش وزن بدن 18/31±40/450 درصد و نرخ رشد ویژه 05/0±77/1 گرم در تیمار فرموله بود که با سایر تیمارها به جز تیمار A اختلاف معنی دار داشت(05/0P<) و کمترین مقادیر در تیمار C به ترتیب 01/54±51/299 درصد و 13/0±43/1 گرم بود. بیشترین ضریب سودمندی پروتئین در غذای A 007/0± 06/0 بود و با فرموله 001/0±042/0 اختلاف معنی دار داشت (05/0P<). ضریب تبدیل غذایی فرموله 12/0±92/0 با غذاهای وارداتی اختلاف معنی داری نداشت(05/0<P). تجزیۀ ترکیبات شیمیایی و فاکتور ضد تغذیه برای غذای فرموله شامل 59/55 درصد پروتئین، 64/10 درصد چربی، 13/13 درصد کربوهیدرات، 28/2 درصد فیبر، 79/9 درصد خاکستر، 55/8 درصد رطوبت و 14/3 میلی اکی والان در 1000 گرم جیره پراکسید بود. با وجود کمتر بودن میزان انرژی غذای فرموله، 4/3706 کیلوکالری در کیلوگرم جیره، نسبت به غذاهای A 1/4174 و B 1/4063، این جیره به دلیل وجود ترکیبات مناسب باعث بیشترین افزایش رشد طی دوره گردید. انرژی غذای C 8/3663، کمترین مقدار بود. از جنبۀ بررسی حسی خواص کیفی یا تست ارگانولپتیک، در کل، ماهیان تغذیه شده با غذای فرموله بهتر از سایر تیمار ها ارزیابی شدند. از نظر اقتصادی هم بدون شک تولید این فرمول غذایی در مقایسه با تیمار های دیگر به صرفه تر خواهد بود. ترکیبات کلی غذای فرموله در حال حاضر به صورت بسته می باشد. پرونده مقاله -
دسترسی آزاد مقاله
374 - Detection of Attacks and Anomalies in The Internet of Things System Using Neural Networks Based on Training with PSO and TLBO Algorithms
Mohammad Nazarpour Navid Nezafati Sajjad ShokuhyarDetecting attacks and anomalies is one of the new challenges in commercializing and advancing IOT technology. One of the most effective methods for detecting attacks is the machine learning algorithms. Until now, many ML models have been suggested to detect attacks and چکیده کاملDetecting attacks and anomalies is one of the new challenges in commercializing and advancing IOT technology. One of the most effective methods for detecting attacks is the machine learning algorithms. Until now, many ML models have been suggested to detect attacks and anomalies, all of them use experimental data to model the detection process. One of the most popular and efficient ML algorithms is the artificial neural network. Neural networks also have different classical learning methods. But all of these classic learning methods are problematic for systems that have a lot of local optimized points or have a very complex target function so that they get stuck in local optimal points and are unable to find the global optimal point. The use of evolutionary optimization algorithms for neural network training can be an effective and interesting method. These algorithms have the capability to solve very complex problems with multi-purposed functions and high constraints. Among the evolutionary algorithms, the particle swarm optimization algorithm is fast and popular. Hence, in this article, we use this algorithm to train the neural network to detect attacks and anomalies of the Internet of Things system. Although the PSO algorithm has so many merits, in some cases it may reduce population diversity, resulting in premature convergence. So, in order to solve this problem, we make use of the TLBO algorithm and also, we show that in some cases, up to 90% accuracy of attack detection can be obtained. پرونده مقاله -
دسترسی آزاد مقاله
375 - نقد و بررسی جنبه های ادبی اشعار میرزاده عشقی
احمد رنجبر ملاحت نجفی عربسید محمد رضا میرزاده عشقی (1273 - 1303 هـ. ش)، شاعر نام آشنای عهد مشروطیت، از رجال پرکار روزگار خود است. او اگر چه در حوزه ی شعر سیاسی و اجتماعی شاعری بزرگ و نامدار محسوب می شود لیکن از نظر ادبی و آشنایی به فنون و تکنیک های شعری دست توانایی ندارد و هنوز به اوج هنر شعری چکیده کاملسید محمد رضا میرزاده عشقی (1273 - 1303 هـ. ش)، شاعر نام آشنای عهد مشروطیت، از رجال پرکار روزگار خود است. او اگر چه در حوزه ی شعر سیاسی و اجتماعی شاعری بزرگ و نامدار محسوب می شود لیکن از نظر ادبی و آشنایی به فنون و تکنیک های شعری دست توانایی ندارد و هنوز به اوج هنر شعری خود نرسیده است. در این مقاله تلاش می شود با بررسی محور ادبی اشعار عشقی، میزان شناخت و تسلط او بر حوزه های مختلف این محور سبکی مشخص و نقاط قوت و ضعف او معلوم گردد. عشقی در قالب های شعر دست به نوآوری زده و یکی از کسانی است که اولین شعر نو را به او نسبت می دهند. او در دیگر قالبهای سنتی نیز دستکاری کرده چنانکه مسمّط ترجیعی را ساخته ی او می دانند. در وزن شعر اگر چه خواهان ایجاد تحول بوده لیکن به خواست مطلوب خود نرسیده است. اغلب صور خیال او کلیشه ای و قدیمی است، لیکن تشبیهات زنده و پویا که بعضاً در بافت شعر جریان پیدا می کند کم و بیش بر جاذبه ی اشعاش افزوده است. در بین آرایه های ادبی بیشترین تلاشش برای تقویت موسیقی شعر از رهگذر جناس ها و تکرارها، و ایجاد تداعی معانی از طریق تضادها، مراعات النظیرها و تلمیح هاست. در باب تلمیح نیز نشان می دهد که با وجود علاقه مندی به ایران باستان، شناخت چندانی از فرهنگ و تاریخ باستان ایران ندارد. پرونده مقاله -
دسترسی آزاد مقاله
376 - بررسی ویژگیهای سبکی اشعار باقی ماندۀ دورۀ اول ادبیات فارسی (طاهریان و صفاریان)
سیاوش مرشدی محمد نجاریاز دورۀ نخست شعر فارسی ـ که از دهۀ نخستین سدۀ سوم هجری آغاز و تا پایان این سده ادامه داشت ـ تنها 64 بیت از هشت شاعر این دوره (حنظله بادغیسی، محمد بن وصیف سگزی (سیستانی)، بَسّام کورد، محمد بن مخلّد، محمود بن ورّاق، فیروز مشرقی، ابوسلیک گرگانی و شاکر بخاری) باقی مانده است چکیده کاملاز دورۀ نخست شعر فارسی ـ که از دهۀ نخستین سدۀ سوم هجری آغاز و تا پایان این سده ادامه داشت ـ تنها 64 بیت از هشت شاعر این دوره (حنظله بادغیسی، محمد بن وصیف سگزی (سیستانی)، بَسّام کورد، محمد بن مخلّد، محمود بن ورّاق، فیروز مشرقی، ابوسلیک گرگانی و شاکر بخاری) باقی مانده است که ژیلبر لازار ـ پژوهشگر و متخصص فرانسوی زبان فارسی ـ آنها را در کتاب اشعار پراکندۀ قدیم ترین شاعران زبان فارسی گردآوری کرده است. تعاریف گوناگونی نیز برای سبک ارایه شده است که در این جستار این تعاریف به طور مختصر ارایه و در نهایت بیشتر سبک دوره واکاوی شده است؛ یعنی: به طور کلی ویژگی های مشترک و خاصی که در شعر شاعران یک دوره به صورت بسامدی[1] به کار می رود. برای این منظور، بسامد ویژگیهای سبکی از سه منظر: 1ـ شکل بیرونی[2] (وزن، قافیه، ردیف، حرف روی، آرایه های لفظی بدیع، قالبهای شعری، کلمات شعر و ویژگی های دستوری)؛ 2ـ شکل درونی[3] (صور خیال و آرایه های معنوی بدیع)؛ 3ـ پیام یا درون مایه[4] بررسی و نتایج حاصل از پژوهش، به صورت بسامدی و جداول آماری ارایه شده است. [1] frequency [2] . external form [3] internal form [4] . subjective form پرونده مقاله -
دسترسی آزاد مقاله
377 - بررسی اثر تشکیل سرمایه ثابت ناخالص و شاخص های بهبود فضای کسب و کار بر جریان سرمایهگذاری مستقیم خارجی در کشورهای منتخب
نگار جعفری فشارکی عباس معمارنژاد سید شمس الدین حسینی کامبیز هژبر کیانیچکیده سرمایهگذاری یکی از اجزای مهم تقاضای کل است که نقش بسیار تعیینکنندهای در رشد اقتصادی هر کشور ایفا میکند. لذا شناخت رفتار سرمایهگذاری مورد توجه اقتصاددانان و سیاستگذاران اقتصادی بوده است. یکی از عوامل مهمی که در تصمیم برای سرمایهگذاری چه در سرمایهگذاری داخلی چکیده کاملچکیده سرمایهگذاری یکی از اجزای مهم تقاضای کل است که نقش بسیار تعیینکنندهای در رشد اقتصادی هر کشور ایفا میکند. لذا شناخت رفتار سرمایهگذاری مورد توجه اقتصاددانان و سیاستگذاران اقتصادی بوده است. یکی از عوامل مهمی که در تصمیم برای سرمایهگذاری چه در سرمایهگذاری داخلی و چه در سرمایهگذاری خارجی موثر است، وجود فضای امن و آنچه تحت عنوان بهبود فضای کسب و کار از آن تعبیر شده، میباشد. به نحوی که ارتقای رتبه کشورها در شاخص های بهبود فضای کسب و کار یکی از پیش زمینه های جذب سرمایه داخلی و خارجی و در نتیجه سرمایه گذاری محسوب می شود. تحقیق حاضر به دنبال بررسی اثر شاخص های بهبود فضای کسب و کار و تشکیل سرمایه ثابت ناخالص بر سرمایه گذاری خارجی است. بدین منظور بر اساس تقسیم بندی بانک جهانی چهار گروه کشور بر حسب میزان درآمد آنها اعم از کشورهای با درآمد پایین، با درآمد متوسط به پایین، با درآمد متوسط به بالا و با درآمد بالا در نظر گرفته شده و اثر متغیرهای تشکیل سرمایه ثابت ناخالص و شاخص های بهبود فضای کسب و کار بر سرمایه گذاری مستقیم خارجی با استفاده از مدل داده های ترکیبی مورد ارزیابی قرار گرفته است. نتیجه برآورد نشان می دهد سطح توسعه یافتگی کشورها و درآمد آنها بر میزان و جهت اثرگذاری تشکیل سرمایه ثابت ناخالص و شاخص های بهبود فضای کسب و کار تاثیر دارد. به نحوی که در کشورهای با درآمد پایین، متوسط به پایین و بالا اثر تشکیل سرمایه ثابت ناخالص بر سرمایه گذاری خارجی، مثبت و در کشورهای متوسط به بالا، این اثر منفی است. در ضمن اثر هر یک از شاخص های بهبود کسب و کار بر سرمایه گذاری خارجی بسته به سطح درآمد کشورها متفاوت است. پرونده مقاله -
دسترسی آزاد مقاله
378 - واقعنمایی اثر هنری به مثابهی محاکات ماهوی از منظر ابنسینا
سیده حورا موسوی سید حبیب اله موسوی مجید ابوالقاسم زادهدربارهی نحوه بازنمایی و محاکات اثرهنری، اولین نظریات، نظریاتی بازنمودیاند که عمدتا با اشکالاتی درباره جامعیت نظریه برای همهی هنرها و نیز تفاوت تقلید فنمآبانه با هنر روبهرو بودند. این نوشتار با روشن کردن معنای اثر هنری اولا و نیز با تحلیل محاکات ماهوی، این نظریه را چکیده کاملدربارهی نحوه بازنمایی و محاکات اثرهنری، اولین نظریات، نظریاتی بازنمودیاند که عمدتا با اشکالاتی درباره جامعیت نظریه برای همهی هنرها و نیز تفاوت تقلید فنمآبانه با هنر روبهرو بودند. این نوشتار با روشن کردن معنای اثر هنری اولا و نیز با تحلیل محاکات ماهوی، این نظریه را تدقیق میکند. ابتدا به محاکات ارسطویی که محاکات از اشیاء، پدیدهها و کنش بود و تأکید او بر محاکات تصویری، مبتنی بر نظریه مشابهت میپردازد و سپس تعمیق این دیدگاه را در نگاه ابنسینا و دیدگاه او به حاکی و محکیِ اثر هنری و نیز سهم صورتهای ذهنیِ فاعل اثر هنری در اثر هنری دنبال خواهد کرد. حاصل این نوشتار که با روش توصیفی-تحلیلی و گردآوری اطلاعات به صورت کتابخانهای به تبیین نظریه محاکات پرداخته است، نشان داد که محکیِ اثر هنری به عنوان شیء یا کنش بیرونی ماهیت متعینی دارد و معلوم بالعرض است. حاکی در زمرهی کیفیات محسوسی است که از ابژهی بیرونی حکایتگری میکند. و نیز روشن شد که ابنسینا با طرح معنایی از صورت ذهنی که پیش از امرمعلوم در خارج، در ذهن ارتسام پیدا میکند، صورت هنری را مشمول این مورد دانسته است. پرونده مقاله -
دسترسی آزاد مقاله
379 - روش در علم منطق هگل
حسین مافی مقدم علی مرادخانیبحث روش در منطق مساله مهمی است که مضمون، هدف و ماهیت منطق را روشن می کند . منطق مانند دیگر علوم مبتنی بر روش است و باید مشخص شود در منطق چه روشی بکار گرفته می شود ؛ مثلا درمنطق ارسطوئی روش معهود روش قیاسی است یعنی استنتاج ِعقلی نتیجه از مقدمات قضایای حملی یا شرطی . منطق چکیده کاملبحث روش در منطق مساله مهمی است که مضمون، هدف و ماهیت منطق را روشن می کند . منطق مانند دیگر علوم مبتنی بر روش است و باید مشخص شود در منطق چه روشی بکار گرفته می شود ؛ مثلا درمنطق ارسطوئی روش معهود روش قیاسی است یعنی استنتاج ِعقلی نتیجه از مقدمات قضایای حملی یا شرطی . منطق تجربی بیکن مبتنی بر روش تجربی و استقرائی بود . روش منطق استعلائی کانت با روش قیاسی و تجربی کاملا متفاوت است. روش کانت تعیین شرایط ماتقدّم شناخت است . روش استعلائی کانت همانند روش ارسطوئی مضمونی ایستا و دارد و فاقد هر گونه پویائی و حرکت است . روش هگل کاملا متفاوت با روش کانت است. روش از دیدگاه هگل به مثابه فراشدی پویا و متحرک است که در آن ساختار آلی و تکوین مقولات را می توان استنتاج کرد . روش هگل نظامی جامع است که در نهایت همه کثرات مقولات در آن تبدیل به وحدت می شود یا به تعبیر دیگر روش صوری است که همه مضمون منطق را در خود جای می دهد. پرونده مقاله -
دسترسی آزاد مقاله
380 - نقش خدا در اندیشه افلاطون
محمد اکوان بهاره سادات سیاقیبی شک مقوله خدا مهمترین و سوال برانگیزترین مقوله ای است که در طول تاریخ، ذهن بشر را به خود مشغول داشته است. در این میان فلسفه نیز از این امر مستثنی نیست. در فلسفه الهی افلاطون که هدف از آن وصول به اصلی است الهی و غیرمحسوس که ذاتش حقیقی و مطلق است، مسئله خدا با تعابیری گ چکیده کاملبی شک مقوله خدا مهمترین و سوال برانگیزترین مقوله ای است که در طول تاریخ، ذهن بشر را به خود مشغول داشته است. در این میان فلسفه نیز از این امر مستثنی نیست. در فلسفه الهی افلاطون که هدف از آن وصول به اصلی است الهی و غیرمحسوس که ذاتش حقیقی و مطلق است، مسئله خدا با تعابیری گوناگون در رسالات مختلف مطرح گردیده است. در این فلسفه خدا با عناوینی چون ایده خیر یا مثال نیک که موجودی در راس عالم مثل و علت تمام موجودات و سرمنشا حقیقت و معرفت است، ایده واحد که کاملترین و برترین صورت است و ایده زیبایی که امری مطلق، جاوید و قائم به ذات است، نام برده می شود که تمامی این ایده ها یکی اند و دارای حقیقتی یکسان هستند. افلاطون به دمیورژ نیز اشاره می کند که او را صانع می داند و نه خالق. این صانع، جهان را از حالت بی نظمی (خائوس) به نظم(کاسموس) در می آورد. هدف از این تحقیق، بررسی مفهوم خدا در تفکر افلاطون است. پرونده مقاله -
دسترسی آزاد مقاله
381 - تناسخ و مسخ در حکمت متعالیه
علی ارشد ریاحی افسانه صباغاندر این مقاله سازگاری قول به استحاله تناسخ و اعتقاد به مسخ در حکمت متعالیه مورد بررسی قرار گرفته است به این منظور ضمن تعریف و ذکر اقسام تناسخ، محذوراتی که موجب شده است فلاسفه حکمت متعالیه تناسخ را محال بدانند، جمع آوری شده است و سپس با توجه به آراء این حکما در مورد حقیقت چکیده کاملدر این مقاله سازگاری قول به استحاله تناسخ و اعتقاد به مسخ در حکمت متعالیه مورد بررسی قرار گرفته است به این منظور ضمن تعریف و ذکر اقسام تناسخ، محذوراتی که موجب شده است فلاسفه حکمت متعالیه تناسخ را محال بدانند، جمع آوری شده است و سپس با توجه به آراء این حکما در مورد حقیقت و واقعیت مسخ، مشخص شده است که هیچ یک از آن محذورات در مسخ وجود ندارد و در نتیجه قول به استحاله تناسخ با اعتقاد به مسخ کاملا سازگار است. پرونده مقاله -
دسترسی آزاد مقاله
382 - Variation of Plant Functional Groups along Livestock Grazing Gradient in Semi-steppe Rangelands (Case Study: Tangsayad Rangelands of Chaharmahal Bakhtiari Province, Iran)
Elham Bani Hashemi Pejman Tahmasebi Kohyani Esmaeel AsadiAssessment and monitoring of rangeland in different grazing managements seems necessary to manage rangelands. The plant functional groups can be used as appropriate responders for rangelands condition and management. Therefore, this study was performedand aimed to deter چکیده کاملAssessment and monitoring of rangeland in different grazing managements seems necessary to manage rangelands. The plant functional groups can be used as appropriate responders for rangelands condition and management. Therefore, this study was performedand aimed to determine the most important traits that are influenced by rangeland variation and management. In order to this, three areas along a grazing gradient including national parks, protected area and free grazing were selected inTangsayad rangelands of Chaharmahal Bakhtiari Province, Iran in 2015. A 100 m transect was established randomly in each site and within it five plots of 4 m2 area at 20 m intervals along transects were determined systematically. Plant species were identified and vegetation cover was recorded in each plot. The number and size of plots and transects were determined regarding to semi-arid rangeland sampling guidelines as well as the dimension of dominant plant species in plant community. Finally, some traits as leaf dimension, plant biomass and cover of species were measured. The results showed that the traits such as leaf length, leaf width, leaf area and leaf weight, grass growth forms and life forms of Hemicryptophyes and Geophytes had significant differences at least in one of three grazing managements sites (P<0/05). Also Principal Component Analyses (PCA) showed that traits as yield, overall weight of plants and perennial plants had high correlation with the first component and the traits such as leaf length, leaf width, leaf area, Hemicryptophyes had also high correlation with the second component. In general conclusion; leaf traits as leaf length, leaf width, leaf area and leaf weight, grass growth form, Hemicryptophytes and Geophytes life forms were introduced as good indicators for assessing and monitoring of grazing management. پرونده مقاله -
دسترسی آزاد مقاله
383 - Role of Plant Species and Ecological Patches in Conserving and Fixing Natural Landsʹ Soil Using Landscape Functional Analysis (LFA) (Case Study: Dehbar Rangeland, Torghabeh, Mashhad, Iran)
Reyhaneh Azimi Gholam Ali Heshmati mohamad kia kianian samira hossein jafari Dawood ZakeriDegradation of plant patches is considered as one of the indices for rangeland degrading health condition. Investigating the accuracy of triple indices (infiltration, stability and soil nutrient cycle) presented by LFA method seems necessary to determine its efficiency چکیده کاملDegradation of plant patches is considered as one of the indices for rangeland degrading health condition. Investigating the accuracy of triple indices (infiltration, stability and soil nutrient cycle) presented by LFA method seems necessary to determine its efficiency in semi-arid areas with the least cost. This study aims to investigate the role of vegetative species and growing forms on soil surface characteristics in Dehbar semi-steppe rangelands, Iran in 2014. So, eleven soil surface characteristics in different vegetative types each of 3 replicates were measured using landscape functional analysis (LFA). Then, the measured parameters were classified based on their sustainability, permeability and food chain continuum for each plant species. According to the results obtained from various analytical investigations, the ecological patches consisting of Artemisia aucheri (46.83%) and complex of Artemisia aucheri and Agropyron intermedium (with the amount of 41.7%) were higher than other forms of vegetative growth for soil sustainability. The complex of Acantholimon sp., Artemisia aucheri and Astragalus commixtus had the lowest amount in terms of soil sustainability (38%). The comparison of soil permeability indices for different types of plant covers showed that the percentage of Artemisia aucheri (32.06%) and complex of Artemisia aucheri and Agropyron intermedium (33.5%) had the highest amount while all other patches were equal and had the lowest amount. In terms of food chain, the ecological patches such as Artemisia aucheri (25.63%) and complex of Artemisia aucheri and Agropyron intermedium (27.66%) had the highest amount. The complex of Artemisia aucheri and Astragalus commixtus (16.36%), the complex of Acantholimon sp., Artemisia aucheri and Astragalus commixtus (13.63%) and the complex of Acantholimon sp. and Agropyron intermedium (15.36%) had the lowest values (p≤0.01). Therefore, Artemisia aucheri (shrub) and a complex of Artemisia aucheri and Agropyron intermedium (grass) patches, introduced as ecological indicators for the study area, are suggested for rangelands restoration. پرونده مقاله -
دسترسی آزاد مقاله
384 - Investigating Environmental Factors Affecting Plant Distribution in QezelOzan - Kosar Rangelands (Ardabil Province), Iran
MirMilad Taheri Niari Ardavan Ghorbani Mehdi Moameri Sahar Ghafari Mahmood BidarlordThe purpose of this study was to investigate the effect of environmental factors on the plant composition and diversity in QezelOzan - Kosar rangelands of Ardabil province, Iran in 2016. Eight sites with elevation ranging from 900 to 2100 meters above sea level were sel چکیده کاملThe purpose of this study was to investigate the effect of environmental factors on the plant composition and diversity in QezelOzan - Kosar rangelands of Ardabil province, Iran in 2016. Eight sites with elevation ranging from 900 to 2100 meters above sea level were selected, and three 100-m transects with 10 plots of 1 m2 were established along each one. Species were collected from the plots and their vegetative forms were determined and the factors related to the frequency of species were recorded. Forbs frequency were determined as 2.1% to 33.3%, shrubs 0.4% to 29.2% and grasses 0.4% to 46.7%. Along each transect, a soil sample was collected from depths of 0 to 30 cm. Then, some soil properties such as pH, Electrical Conductivity, Calcium, Sodium, Potassium, Phosphorus, Nitrogen, Magnesium, Calcium Carbonate equivalent, Organic carbon and Soil texture were determined. Vegetation ordination analysis including Principal Component Analysis (PCA), Detrended Correspondence Analysis (DCA), redundancy analysis (RDA) and Canonical Correspondence Analysis (CCA) were performed in Canoco4.5 and PC-ORD5 software. Results of PCA showed organic carbon with eigenvector values of (0.42), nitrogen (0.41) and elevation (0.37) were important factors influencing the distribution of plants. CCA showed that elevation with eigenvector values of (0.37), potassium (0.35) and clay (0.44) were the most effective ones in forbs and grass distribution, potassium with eigenvector values of (0.35), pH (0.58) and organic carbon (0.42) were the most important factors. RDA in shrubs distribution also showed slope with eigenvector values of (0.44), elevation (0.37) and sand percent (0.46) were the most important factors. By doing this research, the basic knowledge of the ecological requirements in the rangelands of these areas was obtained. Thus, by the increase of technical knowledge, some activities can be done to protect, systematically exploit and restore the degraded areas. پرونده مقاله -
دسترسی آزاد مقاله
385 - Legume-Grass Ratio and some Soil Properties in Four Vegetation Types in Steppe Rangelands of Iran (Case study: Peshert Rangelands in Chahardangeh Sari, Iran)
Nahid Jabbari Ghasem Ali Dianati Tilaki Hassan GhelichniaTThe Leguminosae family plays a significant role in rangeland ecosystems with biological nitrogen fixation for soil fertility. The grasses significantly increase rangeland production and sustainability. Legume-Grass Ratio (LGR) is an indicator of soil fertility. This st چکیده کاملTThe Leguminosae family plays a significant role in rangeland ecosystems with biological nitrogen fixation for soil fertility. The grasses significantly increase rangeland production and sustainability. Legume-Grass Ratio (LGR) is an indicator of soil fertility. This study was aimed to investigate the LGR and some soil properties in four vegetation types (Stipa arabica Trin.-Medicago sativa L., Festuca ovina L.-Astragalus gossypinus Fisc., Artemisia sieber Besser-Festuca ovina and Artemisia sieberi) in the Peshert rangeland, Chahardangeh Sari, Iran in 2020. In this research, 40 plots of 1m2 were randomly established in four vegetation types. In each plot, vegetation characteristics including the number of species per unit area were recorded. Soil sampling was done at a depth of 0-20 cm for each plot. Finally, 40 soil samples were analysed in the laboratory for soil properties including: Carbon (C), Soil Organic Matter (SOM), Bulk Density (BD), Aggregate Stability (AS), Particulate Organic Matter (POM), soil texture, available potassium (K), Nitrogen (N), EC and pH, available Phosphorus (P) and carbon to nitrogen ratio. Data were analyzed using one-way ANOVA and Duncan’s test was used to compare the differences between four vegetation types for LGR, species diversity and soil properties. SPSS-v20 software was used for data analysis. The results showed that there were significant differences between four vegetation types for all the traits (P≤0.05). The highest and lowest LGR with average values of 0.86 and 0.10 were observed in S. arabica-M. sativa and Ar. sieberi-F. ovina, respectively. The lowest amounts of AS%, SOM%, N% and POM% with average values of 0.31, 0.62, 0.03, 3.53 were observed in Ar. sieberi. In all vegetation types, soil fertility decreased by decreasing the LGR. پرونده مقاله -
دسترسی آزاد مقاله
386 - A Review on the Role of Indigenous Knowledge in Rearing Livestock in Rangelands (Olad Village, Andika, Khuzestan Province, Iran)
Somaieh Dehdari Alam CheraghianCultural ecology is a knowledge that examines the cultural aspects of the relationship between human being and its surrounding. In this regard, this study with a qualitative method and a naturalistic approach using a technique that focused on groups and also a profound چکیده کاملCultural ecology is a knowledge that examines the cultural aspects of the relationship between human being and its surrounding. In this regard, this study with a qualitative method and a naturalistic approach using a technique that focused on groups and also a profound interview has investigated indigenous ecological knowledge to manage the herds in Olad village, Andika town, Khuzestan province, Iran, 2016. The findings of the study showed that the people living in this village for many years use their local knowledge in order to interact with the surrounding environment, breeding and keeping livestock in various pasture. They also divide the pastures based on recognizing the need in any physiological stage of livestock. In this regard, they acquired ecological memory in the field of livestock identification. They also have acquired indigenous knowledge in all fields, including mating and calving, time management, taking care of lambs, young goats, breastfeeding or milking, and forming the structure and composition of the herds according to the cultural and environmental conditions. They have a pity on the treatment of livestock and culture of collaboration and co-operation in using pastures. Ultimately, the present study confirmed the protective aspects, and economic, social, cultural and indigenous knowledge of villagers in order to express their potential natural resources and also upgrade their development physically and spiritually. It has been stated that indigenous ecological knowledge of herders plays an important role in the stability of land and livestock management and also all natural fields. پرونده مقاله -
دسترسی آزاد مقاله
387 - Effects of Fire on Vegetation Cover and Forage Production of Solan Rangeland in Hamadan Province, Iran
Ghasem Asadian Zahra Azimnejad Mohammad Reza BakhtiariFire causes extensive damage to rangelands’ ecosystems in arid and semi-arid regions. The purpose of this study was to investigate the effects of rangeland fire on vegetation and forage production in mountainous rangelands of the Solan area in Hamadan province, Ir چکیده کاملFire causes extensive damage to rangelands’ ecosystems in arid and semi-arid regions. The purpose of this study was to investigate the effects of rangeland fire on vegetation and forage production in mountainous rangelands of the Solan area in Hamadan province, Iran. A burnt area and a homogeneous area without fire (control) were selected for this study. In the burnt area, the fire has occurred in July 2018. In each site, data were collected in the months July to October using four linear transects with a length of 200 m using a systematic random sampling method. In each transect at a distance of 20 m, 10 plots of 1m2 were considered. Vegetation sampling was done during (July to October) three years of 2018, 2019, and 2020. Some factors such as forage production, percentage of bare soil, stones and gravels, litter, survival rate, canopy cover, and percentage of shrubs, perennial and annual forbs, perennial and annual grasses were measured. The results showed that there were significant differences between the two areas for all variables except perennial forbs cover, shrubs cover, and stone and gravels percent in the first year. Fire reduced the litter percent, forage production, canopy cover, survival, and increased bare soil, soil erosion, and sediment. The geophytes life forms of the species in the study areas had the highest coverage percentage (38.66%) in both areas. Some species such as: Astragalus verus, Astragalus gossypinus, Acantholimon bromifolium, Acantholimon olivieri, and Acanthophyllum crassifolium were sensitive to fire. On the other hand, species such as Rosa persica due to having rhizomes and extensive underground roots were resistant to fire. پرونده مقاله -
دسترسی آزاد مقاله
388 - Impact of Abiotic Environmental Factors on Pistacia vera L. Density in Woody Rangelands: A Case Study in Northeastern Iran
Alemeh Mazangi Hamid Ejtehadi Mohammad Farzam Omid Mirshamsi Soroor RahmanianKhaje Kalat woody rangelands, located in northeastern Iran, represent one of the few remaining Sicilian pistachio rangelands worldwide. Understanding the ecological processes shaping pistachio communities is crucial for effective management and restoration efforts. This چکیده کاملKhaje Kalat woody rangelands, located in northeastern Iran, represent one of the few remaining Sicilian pistachio rangelands worldwide. Understanding the ecological processes shaping pistachio communities is crucial for effective management and restoration efforts. This study aimed to investigate the impact of abiotic environmental factors on Pistacia vera L. density, a research study was conducted during 2018-2019. And 162 quadrats (25 m2 each) were established across three geological formations, two aspects (northern vs. southern), and three classes of Terrain Niche Index (TNI). The two-way analysis of variance (ANOVA) was employed to analyze the impact of geological formation, topographic attributes, and soil parameters on pistachio density. Significant findings (p<0.05) underscore the pronounced influence of geological formation, TNI, and their interactions on pistachio density. These findings showed distinct patterns across formations and elevations. Moreover, an analysis of soil parameters highlights the pivotal roles of phosphorus and geological formations in influencing pistachio density. Notable associations between phosphorus levels and density emerged, along with substantial variations in soil properties among different formations. While recognizing the significance of soil fertility, particularly in nutrient-rich lowlands, the study suggests that it may not be the primary limiting factor for mature pistachio trees. However, the presence of such nutrient-rich lowlands may potentially hinder pistachio establishment. In conclusion, these insights underscore the importance of analytical ecosystem management for preserving and restoring Pistacia vera rangelands effectively. پرونده مقاله -
دسترسی آزاد مقاله
389 - Investigation of Carbon Sequestration Potential in Four Species Including Atriplex canescens, Haloxylon persicum, Artemisia sieberi and Agropyron desertorum (Case Study: Zarandieh, Saveh, Iran)
Seyedeh Khadijeh Mahdavi Mohsen EsmailiClimate changes and global warming are considered as very important challenges of sustainable development. Carbon sequestration is the easiest and cheapest way to reduce the greenhouse gases, especially carbon which constitutes the largest portion of them. In the presen چکیده کاملClimate changes and global warming are considered as very important challenges of sustainable development. Carbon sequestration is the easiest and cheapest way to reduce the greenhouse gases, especially carbon which constitutes the largest portion of them. In the present study, the potential of carbon sequestration in four plant species of Atriplex canescens, Haloxylon persicum, Artemisia sieberi and Agropyron desertorum was studied in the rangeland of Zarandieh, Saveh, Iran. Key areas and study sites were selected and size and number of plots were determined using the minimal area method. Then, aerial and underground organs were cut and litter of species was collected from the soil surface. Also, the soil samples were taken from two depths of 0-30 and 30-70 cm in the same plots. Samples were moved to laboratory and the rates of plant organic carbon and soil organic carbon were determined using combustion and Walky-Black methods, respectively. Data were analyzed and means comparison was made using Duncan method in SPSS software. Results showed that the rates of carbon sequestration in different species, vegetation organs and soil layers were different and increased in wooding species. Also, the rate of soil carbon sequestration in the upper depth was more than the lower one; thus, carbon storage in soil near short trees (Atriplex canescens, Haloxylon persicum) was higher than that near shrubs (Artemisia sieberi) and herbaceous form (Agropyron desertorum). پرونده مقاله -
دسترسی آزاد مقاله
390 - Study of Physiognomy and Origin of Plant Species in Sarshiv Area of Marivan, Iran
Seyyed Mohsen Hassani Habib Yazdanshenas Kourosh Nazarpoor Fard Reza Bassiri Javad Pur RezaeeAbstract. Vegetation of each region is one of the most important phenomena of nature and is the best guide to judge about the ecological sciences of that region because the plants are resistant organisms that have endured the long term conditions of all kinds of environ چکیده کاملAbstract. Vegetation of each region is one of the most important phenomena of nature and is the best guide to judge about the ecological sciences of that region because the plants are resistant organisms that have endured the long term conditions of all kinds of environmental conditions for a long period of time and have adapted with environmental stresses. Therefore floristical investigation of each region is outmost importance for that region and it serves as a birth certification document. It also reviews geographical and floristical origins of each region which is the most effective method for managing and protecting the available genetic resources. The aim of this study was introducing flora, life form and plant chorotypes in Sarshiv rangelands, west of Marivan, Iran. The method of sampling was random- systematic with 76 plots. Floristical studies showed that there were 39 families, 116 genera and 139 plant species in this area. The most important families in this area were Asteraceae (20 species), Papilionaceae (Fabaceae) (16 species), Apiaceae (11 species) and Poaceae (10 species). Among all species identified in this region, one was endemic and the three other species were considered as rare. Investigation of life forms based on Raunkiaer method showed that there were various plants in different life form. Among all of them, Terophytes (35%) and Chamaephytes (3%) had the highest and the lowest plant species, respectively. The review of the geographical distribution of plants in the region showed that the species belonged to different Chorotypes and Irano-Turanian (50%) and European–Siberian (1%) had the highest and the lowest plant species of the region, respectively. پرونده مقاله -
دسترسی آزاد مقاله
391 - بررسی ارتباط بین مالیات بر ارزشافزوده با ثبات رویه، یکنواختی و رجحان محتوا بر شکل اطلاعات حسابداری
سارا یوسف زاده قدرت اله طالب نیا جلیل بیطاریچکیده هدف از این مقاله بررسی ارتباط بین مالیات بر ارزشافزوده با ثبات رویه، یکنواختی و رجحان محتوا بر شکل اطلاعات حسابداری میباشد. جامعه آماری این پژوهش شامل کارشناسان و متخصصین مالیاتی مالیات بر ارزشافزوده و صاحب نظران سازمان امور مالیاتی و مودیان شرکتها بوده که با چکیده کاملچکیده هدف از این مقاله بررسی ارتباط بین مالیات بر ارزشافزوده با ثبات رویه، یکنواختی و رجحان محتوا بر شکل اطلاعات حسابداری میباشد. جامعه آماری این پژوهش شامل کارشناسان و متخصصین مالیاتی مالیات بر ارزشافزوده و صاحب نظران سازمان امور مالیاتی و مودیان شرکتها بوده که با استفاده از 328 پرسشنامه مورد بررسی قرار گرفته و پرسشنامه های مستخرج شده به وسیله طیف لیکرت بررسی شده اند. همچنین روایی آن به وسیله آلفای کرنباخ سنجش شده و از نرمافزار آموس برای تجزیه و تحلیل دادهها استفاده گردیده است. نتایج آزمون رابطه مالیات بر ارزشافزوده با هر یک از متغیرهای مستقل به صورت جداگانه حاکی از آن است که تمامیفرضیههای مطرح شده با 95٪ اطمینان مورد تأیید قرار گرفتهاند. یافته های این پژوهش بیانگر ارتباط مستقیم مالیات بر ارزشافزوده با ثبات رویه، یکنواختی و رجحان محتوا بر شکل اطلاعات حسابداری میباشد. نتایج بیانگر این است که داشتن ثبات رویه، یکنواختی و رجحان محتوا بر شکل در اطلاعات حسابداری باعث میشود کیفیت حسابداری مالیات بر ارزشافزوده بهبود یابد. این نتایج میتواند به وسیله سازمان حسابرسی، سازمان امور مالیاتی، مدیران و رؤسای حسابداری و کارکنان مالی جهت انجام عملیات مالی مورد استفاده قرار گیرد. پرونده مقاله -
دسترسی آزاد مقاله
392 - قومیت، مذهب، صور مشارکت در بین پیروان مذاهب شیعه و سنّی کردهای کرمانشاه
فریبا موقوفه یی علیرضا محسنی تبریزیدر مقاله حاضر به بررسی قومیت، مذهب، صور مشارکت در بین مذاهب شیعه و سنّی کردهای شهر کرمانشاه در سال 1397 پرداخته شده است. از روش تحقیق پیمایشی و بر اساس قواعد آماری حجم نمونه، 384 نفر از شهروندان شیعه و سنّی شهر کرمانشاه به عنوان نمونه آماری و از روش نمونه گیری طبقه ای ن چکیده کاملدر مقاله حاضر به بررسی قومیت، مذهب، صور مشارکت در بین مذاهب شیعه و سنّی کردهای شهر کرمانشاه در سال 1397 پرداخته شده است. از روش تحقیق پیمایشی و بر اساس قواعد آماری حجم نمونه، 384 نفر از شهروندان شیعه و سنّی شهر کرمانشاه به عنوان نمونه آماری و از روش نمونه گیری طبقه ای نسبتی انتخاب شدند. جهت جمع آوری اطلاعات از پرسشنامه محقق ساخته متشکل از گویه هایی در مقیاس 5 گزینه ای طیف لیکرت با پایایی 95/0 و اعتبار محتوایی قابل قبول استفاده گردید. در تدوین چارچوب نظری متغیرهای مورد مطالعه؛ از نظریه های لرنر- آیزن و فیش باین- هومنز و محسنی تبریزی استفاده شد. نتایج تحقیق نشان داد؛ وضعیت صور مشارکت در بین کردنشینان کرمانشاه 5/62% می باشد. همچنین نتایج حاصل از آزمون تی تست مستقل نشان داد؛ پیروان مذهب شیعه دارای مشارکت روانی، مشارکت فرهنگی و مشارکت سیاسی بالاتری بودند. اما پیروان مذهب سنّی دارای مشارکت اقتصادی و اجتماعی بالاتری نسبت به پیروان مذهب شیعه بودند. پرونده مقاله -
دسترسی آزاد مقاله
393 - علل و پیامدهای روابط خارج از ازدواج (مورد مطالعه: زنان شهرستان رفسنجان)
رضا اکبری افسانه توسلی بهرام قدیمیبرقراری تعامل اجتماعی بین افراد، از جمله نیازهای ذاتی انسان است. تعامل و ارتباط با دیگران، یکی از نیازهای اساسی در زندگی انسانی به شمار می آید. آدمی به دنبال کسی که در کنار ایشان احساس خوشبختی کرده و از تعامل با آن ها لذت و منفعت بیشتری را نصیب خود نماید. نیازهای مختلف چکیده کاملبرقراری تعامل اجتماعی بین افراد، از جمله نیازهای ذاتی انسان است. تعامل و ارتباط با دیگران، یکی از نیازهای اساسی در زندگی انسانی به شمار می آید. آدمی به دنبال کسی که در کنار ایشان احساس خوشبختی کرده و از تعامل با آن ها لذت و منفعت بیشتری را نصیب خود نماید. نیازهای مختلف انسان وی را در معرض ارتباطات مختلف قرار می دهد. نیاز به ارتباط با جنس مخالف، گهگاه روابطی را باعث می شود که خارج از عرف و فرهنگ اسلامی کشور ما می باشد. این پژوهش با هدف بررسی علل و پیامدهای بوجود آورنده روابط خارج از ازدواج، در میان زنان شهرستان رفسنجان، انجام شده است. روش پژوهش نظریه داده بنیاد می باشد که داده های مورد نیاز آن از طریق مصاحبه نیمه ساختار یافته با 15 نفر از زنان انجام شده است. شیوه انتخاب مشارکت کنندگان، هدفمند و تعیین تعداد آنها با رسیدن به مرحله اشباع، مشخص گردیده است. از مجموع 1127داده ی خام، 875 مفهوم، 125خرده مقوله و 54 مقوله اصلی از داده های اولیه استخراج گردید. در نهایت مفهوم محوری رویای ازدواج، به عنوان پدیده اصلی که بقیه مقولات را پوشش می داد، انتخاب گردید. نتایج این پژوهش نشان داد که مهم ترین انگیزه زنان از گرایش به روابط خارج از ازدواج، تشکیل خانواده و ازدواج می باشد. استقلال یابی، و میل به رها شدن از قوانین و چارچوب های خانواده از جمله شرایط علّی این گرایش به حساب می آید. پرونده مقاله -
دسترسی آزاد مقاله
394 - رابطه میان ساختار توسعه اقتصادی ـ اجتماعی و تحولات ساختار جمعیتی نظام خانواده در ایران طی سه دهه اخیر (مطالعه موردی خانوادههای ساکن شهر تهران سال 95ـ94)
ناهید طاهرمحمدی سیف الله سیف اللهیپژوهش حاضر با هدف بررسی رابطه بین ساختار توسعه اقتصادی ـ اجتماعی و ساختار جمعیتی نظام خانواده در ایران طی سه دهه اخیر انجام گرفته است. چارچوب نظری پژوهش حاضر بر اساس نظریه سیفاله سیفاللهی در دو سطح کلان و خرد میباشد. این تحقیق به روش اسنادی، مطالعه میدانی و پیمایشی ب چکیده کاملپژوهش حاضر با هدف بررسی رابطه بین ساختار توسعه اقتصادی ـ اجتماعی و ساختار جمعیتی نظام خانواده در ایران طی سه دهه اخیر انجام گرفته است. چارچوب نظری پژوهش حاضر بر اساس نظریه سیفاله سیفاللهی در دو سطح کلان و خرد میباشد. این تحقیق به روش اسنادی، مطالعه میدانی و پیمایشی با تکنیک پرسشنامه که دارای اعتبار صوری و سازهای و اعتماد (آلفای کرونباخ بالای 70 درصد) بهدستآمده است. جامعه آماری بررسی حاضر خانوارهای ساکن سال 95ـ94 ساکن شهر تهران میباشد که تعدادشان بر اساس دادههای مرکز آمار ایران 1/4 میلیون نفر گزارششده است و بر اساس فرمول کوکران تعداد حجم نمونه به شیوه نمونهگیری خوشهای و سهمیهای انتخاب شد و با توجه به سطح سنجش متغیرها از آزمونهای آماری کولموگروف ـ اسمیرنوف و بررسی فرضیههای تحقیق از طریق آزمون t تک نمونهای گزارش گردید و نتایج ذیل حاصل گردید. یافتههای اسنادی نشان از رابطه ناگسستنی ساختار توسعه اقتصادی ـ اجتماعی و تحولات عناصر و مؤلفههای جمعیتی نظام خانواده میباشد. مصاحبه با متخصصان نشان از مهمترین تحولات خانواده بر اساس گسترش خانواده هستهای است و یافتههای پیمایشی نشان از نتایج آزمون t تک نمونهای حاکی از رابطه معنادار میان ساختار توسعه اقتصادی ـ اجتماعی و تحولات عناصر و مؤلفههای جمعیتی نظام خانواده در ایران طی سه دهه اخیر میباشد. پرونده مقاله -
دسترسی آزاد مقاله
395 - توسعه سیستمهای معاملاتی سبد سهام با استفاده از روشهای یادگیری ماشین
علی حیدریان محدثه مرادی مهر علی فرهادیانتئوری سبد سرمایهگذاری یکپایه مهم برای مدیریت سبد سهام است که در جامعه دانشگاهی موضوعی است که بهخوبی موردمطالعه قرارگرفته است اما بهطور کامل اشباعنشده است. ادغام پیشبینی بازده در تشکیل سبد سرمایه-گذاری میتواند عملکرد مدل بهینهسازی سبد را بهبود بخشد. ازآنجاییکه م چکیده کاملتئوری سبد سرمایهگذاری یکپایه مهم برای مدیریت سبد سهام است که در جامعه دانشگاهی موضوعی است که بهخوبی موردمطالعه قرارگرفته است اما بهطور کامل اشباعنشده است. ادغام پیشبینی بازده در تشکیل سبد سرمایه-گذاری میتواند عملکرد مدل بهینهسازی سبد را بهبود بخشد. ازآنجاییکه مدلهای یادگیری ماشین برتری قابلتوجهی نسبت به مدلهای آماری نشان دادهاند، در این پژوهش، یک رویکرد جدید تشکیل سبد سهام در دو مرحله ارائهشده است. مرحله اول با پیادهسازی شبکه عصبی پیچشی، سهام مناسب برای خرید انتخابشده و در مرحله دوم با استفاده از مدل میانگین-واریانس (MV)، وزن بهینه در سبد سرمایهگذاری برای آنها تعیین میشود. بهطور خاص، مراحل انتخاب سهام مناسب و تشکیل سبد سهام دو مرحله اصلی مدل توسعه دادهشده در این پژوهش است. مرحله اول، یک مدل شبکه عصبی پیچشی برای پیشبینی نقاط خرید و فروش سهام برای دوره بعدی پیشنهادشده است. مرحله دوم، سهامی که برچسب خرید میگیرند بهعنوان سهام با مناسب برای خرید انتخابشده و از مدل MV برای تعیین وزن بهینه آنها در سبد سهام استفاده میشود. نتایج بهدستآمده با استفاده از 5 سهم از بازار بهادار تهران بهعنوان نمونه مطالعه نشان میدهد که بازده و نسبت شارپ روش پیشنهادی از روشهای سنتی (بدون فیلتر کردن سهام مناسب) بهطور قابلتوجهی بهتر است. پرونده مقاله -
دسترسی آزاد مقاله
396 - مطالعات امکان سنجی بکارگیری فرمول حساسیت یونانی ها در بازار سرمایه ایران
سیاوش احمدی چهره برقدر این مقاله فرمول حساسیت یونانی ها در بازار سرمایه مورد بررسی قرار خواهد گرفت. هدف از این تحقیق امکان سنجی به کار گیری فرمول حساسیت یونانی ها در بورس تهران می باشد. این تحقیق از تحقیقات کاربردی و اطلاعات مالی ایران خودرو از مهر ۹۵ تا اسفند ۹۵ بررسی شده است. به منظور بر چکیده کاملدر این مقاله فرمول حساسیت یونانی ها در بازار سرمایه مورد بررسی قرار خواهد گرفت. هدف از این تحقیق امکان سنجی به کار گیری فرمول حساسیت یونانی ها در بورس تهران می باشد. این تحقیق از تحقیقات کاربردی و اطلاعات مالی ایران خودرو از مهر ۹۵ تا اسفند ۹۵ بررسی شده است. به منظور بررسی و تفسیر مفاهیم فرمول حساسیت یونانی نرم افزارهای آماری و ریاضی مانند MATLAB بهره گرفته و محاسبات با قوانین اختیار اروپای (مطابق بازار بورس تهران) انجام می شود. خروجی های به دست آمده نشان میدهد که میانگین و پراکندگی بدست آمده در نمونه انتخاب شده دارای توزیع نرمال نمیباشد وبه کمک آزمون لون ثابت میشود که میتوانیم میانگین و پراکندگی نمونه بدست آمده را با ضریب اطمینان 99درصد ،جایگزین میانگین و پراکندگی جامعه نموده و از معادله بلک- شولز برای معرفی یونانی ها بهره برده و تاثیر هر یک از متغیرها را بررسی می نماییم.خروجی های بدست آمده نشان می دهد که پارامترهای قیمت سهام، پراکندگی، زمان سررسید، ضریب بهره در قیمت اختیار خرید تاثیر داشته وبرای کاهش ریسک در بازار بورس معرفی یک مدل ریاضی و ضرایب حساسیت یونانی از قبیل دلتا، رو، وگا، تتا و گاما لازم بوده و استفاده از ضرایب حساسیت یونانی در بورس تهران و آشنا نمودن سرمایه گذاران با مفاهیم ریاضیات مالی ضروری می باشد. پرونده مقاله -
دسترسی آزاد مقاله
397 - On computing of integer positive powers for one type of tridiagonal and antitridiagonal matrices of even order
M. Beiranvand M. Ghasemi KamalvandIn this paper, firstly we derive a general expression for the $m$th power ($m\in\mathbb{N}$) for one type of tridiagonal matrices of even order. Secondly we present a method for computing integer powers of the antitridiagonal matrices that is corresponding with these ma چکیده کاملIn this paper, firstly we derive a general expression for the $m$th power ($m\in\mathbb{N}$) for one type of tridiagonal matrices of even order. Secondly we present a method for computing integer powers of the antitridiagonal matrices that is corresponding with these matrices. Then, we present some examples to illustrate our results and give Maple 18 procedure in order to verify our calculations پرونده مقاله -
دسترسی آزاد مقاله
398 - A generalization of weighted versions of the determinant, permanent and the generalized inverse of rectangular matrices
M. BayatIn this paper, we first generalized the weighted versions of determinants, permanents and the generalized inverses of rectangular matrices. We also investigate some of their algebraic properties. As a by product of the above investigation, we then present a determinanta چکیده کاملIn this paper, we first generalized the weighted versions of determinants, permanents and the generalized inverses of rectangular matrices. We also investigate some of their algebraic properties. As a by product of the above investigation, we then present a determinantal representation for the general and Moore-Penrose inverses which satisfy on certain conditions. Finally, we give a general algorithm for determining the inverse of some certain class of the rectangular matrices defined based on weighted determinants. پرونده مقاله -
دسترسی آزاد مقاله
399 - Computation of the q-th roots of circulant matrices
M. Amirfakhrian P. Mohammadi KhanghahIn this paper, we investigate the reduced form of circulant matrices and we showthat the problem of computing the q-th roots of a nonsingular circulant matrix A can bereduced to that of computing the q-th roots of two half size matrices B - C and B + C.In this paper, we investigate the reduced form of circulant matrices and we showthat the problem of computing the q-th roots of a nonsingular circulant matrix A can bereduced to that of computing the q-th roots of two half size matrices B - C and B + C. پرونده مقاله -
دسترسی آزاد مقاله
400 - Determination of a Matrix Function in the Form of f(A)=g(q(A)) Where g(x) Is a Transcendental Function and q(x) Is a Polynomial Function of Large Degree Using the Minimal Polynomial
Esmat NikbakhtMatrix functions are used in many areas of linear algebra and arise in numerical applications in science and engineering. In this paper, we introduce an effective approach for determining matrix function f(A)=g(q(A)) of a square matrix A, where q is a polynomial functio چکیده کاملMatrix functions are used in many areas of linear algebra and arise in numerical applications in science and engineering. In this paper, we introduce an effective approach for determining matrix function f(A)=g(q(A)) of a square matrix A, where q is a polynomial function from a degree of m and also function g can be a transcendental function. Computing a matrix function f(A) will be time- consuming and difficult if m is large. We propose a new technique which is based on the minimal polynomial and characteristic polynomial of the given matrix A, which causes, to reduce the degree of polynomial function significantly. The new approach has been tested on several problems to show the efficiency of the presented method. Finally, the application of this method in state space and matrix quantum mechanics is highlighted. پرونده مقاله -
دسترسی آزاد مقاله
401 - On Extension of Generalized Laguerre Polynomials of Two Variable
Ahmed Al-GonahIn this paper, we introduce a new extension of generalized Laguerre polynomials of two variable by using the extended Beta function. Some properties of these extension polynomials such as generating functions, integral representation, recurrencerelations and summation f چکیده کاملIn this paper, we introduce a new extension of generalized Laguerre polynomials of two variable by using the extended Beta function. Some properties of these extension polynomials such as generating functions, integral representation, recurrencerelations and summation formulae are obtained. پرونده مقاله -
دسترسی آزاد مقاله
402 - Theory of a Superluminous Vacuum Quanta as the Fabric of Space
Rajan IyerOur observations of magneton with Ferrolens shows evidence pointing to such magneton entity, and more evidently in recent results with the synthetic vacuum unipole experiments. Physics formalism ansatz novel model analyses demonstrate how vacuum quanta may have sufficie چکیده کاملOur observations of magneton with Ferrolens shows evidence pointing to such magneton entity, and more evidently in recent results with the synthetic vacuum unipole experiments. Physics formalism ansatz novel model analyses demonstrate how vacuum quanta may have sufficient energy for vacuum genesis, by constructing eigenspinors of zero_point microblackhole Hamiltonian quantum mechanics with Helmholtz decomposition matrix of gradient and rotational tensors, that are characteristic of translational vortex fields. With these mathematical physics processes, we obtain resulting energy fields spatial property partial differential equations characterizing eigenstate energetics of zero_point vacuum quagmire, as well as eigenstate vortex fields of microblackhole, both together making up plasmodial zones within quagmire. Specific eigenspinors Hamiltonian partial differential equations quantifying energy and fields eigenfunctions. Vacuum that is dipole vacuum may have superposition of complex input of quagmire vortex fields acting to create non-Hermitian quantum relativistic physics. پرونده مقاله -
دسترسی آزاد مقاله
403 - NON-POLYNOMIAL SPLINE SOLUTIONS FOR SPECIAL NONLINEAR FOURTH-ORDER BOUNDARY VALUE PROBLEMS
R. JalilianWe present a sixth-order non-polynomial spline method for the solutions of two-point nonlinear boundary value problem u(4)+f(x,u)=0, u(a)=α1, u''(a)= α2, u(b)= β1,u''(b)= β2, in off step points. Numerical method of sixth-order with end conditions o چکیده کاملWe present a sixth-order non-polynomial spline method for the solutions of two-point nonlinear boundary value problem u(4)+f(x,u)=0, u(a)=α1, u''(a)= α2, u(b)= β1,u''(b)= β2, in off step points. Numerical method of sixth-order with end conditions of the order 6 is derived. The convergence analysis of the method has been discussed. Numerical examples are presented to illustrate the applications of method, and to compare the computedresults with other known methods. پرونده مقاله -
دسترسی آزاد مقاله
404 - SPATIOTEMPORAL DYNAMIC OF TOXIN PRODUCING PHYTOPLANKTON (TPP)-ZOOPLANKTON INTERACTION
A. K. Sharma A. Sharma K. AgnihotriThe present paper deals with a toxin producing phytoplankton (TPP)-zooplankton interaction in spatial environment in thecontext of phytoplankton bloom. In the absence of diffusion the stability of the given system in terms of co-existence and hopf bifurcation has been d چکیده کاملThe present paper deals with a toxin producing phytoplankton (TPP)-zooplankton interaction in spatial environment in thecontext of phytoplankton bloom. In the absence of diffusion the stability of the given system in terms of co-existence and hopf bifurcation has been discussed. After that TPP-zooplankton interaction is considered in spatiotemporal domain by assuming self diffusion in both population. It has been obtained that in the presence of diffusion given system becomes unstable (Turing instability) under certain conditions. Moreover, by applying the normal form theory and the center manifold reduction for partial differential equations (PDEs), the explicit algorithm determining the direction ofHopf bifurcations and the stability of bifurcating periodic solutions is derived. Finally, numericalsimulations supporting the theoretical analysis are also included. پرونده مقاله -
دسترسی آزاد مقاله
405 - SPLINE COLLOCATION FOR FREDHOLM AND VOLTERRA INTEGRO-DIFFERENTIAL EQUATIONS
Nehzat Ebrahimi Jalil RashidiniaA collocation procedure is developed for the linear and nonlinear Fredholm and Volterraintegro-differential equations, using the globally defined B-spline and auxiliary basis functions.The solutionis collocated by cubic B-spline and the integrand is approximated by the چکیده کاملA collocation procedure is developed for the linear and nonlinear Fredholm and Volterraintegro-differential equations, using the globally defined B-spline and auxiliary basis functions.The solutionis collocated by cubic B-spline and the integrand is approximated by the Newton-Cotes formula.The error analysis of proposed numerical method is studied theoretically. Numerical results are given toillustrate the efficiency of the proposed method which shows that our method can be applied for largevalues of N. The results are compared with the results obtained by other methods to illustrate the accuracyand the implementation of our method. پرونده مقاله -
دسترسی آزاد مقاله
406 - GAME OF COORDINATION FOR BACTERIAL PATTERN FORMATION: A FINITE AUTOMATA MODELLING
Sudeepto Bhattacharya Gaurav SrivastavaIn this paper, we use game theory to describe the emergence of self-organization and consequent pattern formation through communicative cooperation inBacillus subtiliscolonies. The emergence of cooperative regime is modelled as an n-player Assurance game, with the bacte چکیده کاملIn this paper, we use game theory to describe the emergence of self-organization and consequent pattern formation through communicative cooperation inBacillus subtiliscolonies. The emergence of cooperative regime is modelled as an n-player Assurance game, with the bacterial colonies as individual players. The game is played iteratively through cooperative communication, and mediated by exchange of information about the local environment between the different bacterial colonies comprising the system. The iteration causes the interactive system to grow and produce beautiful complex spatial patterns signaling the emergence of self-organization. In laboratory, we have the bacterial growth environment mimicked in Petri dish, where chemical stress is introduced in a three- fold manner: through modification of nutrition and substrate amounts and introducing an antibiotic in the system. In our model, bacteria colonies, treated asindividual players, interact within the environment and grow according to a set of rules. The rules capture the biotic processes that allow bacteria to grow in the hostile environment, and cope with the stress. We find the effects of sophisticated communications and information-sharing between bacterial colonies to be a vital determinant for bacterial growth, which is manifested in the Petri dish as complex spatial patterns, often at fractal scales. As a formal description of the above game, we model the emergence of this cooperative behaviour as finite deterministic automata, whose transition function is informed by the Assurance game pay-off. Consequently, the exercise allows us to derive a grammar that provides the rules for describing the bacterial interactions leading to the emergence of the spatial structures. پرونده مقاله -
دسترسی آزاد مقاله
407 - SPOT PATTERNS IN GRAY SCOTT MODEL WITH APPLICATION TO EPIDEMIC CONTROL
Muhammad Abdullahi Yau M. U. Adehi Muktari GarbaIn this work, we analyse a pair of two-dimensional coupled reaction-diusion equations known as the Gray-Scott model, in which spot patterns have been observed. We focus on stationary patterns, and begin by deriving the asymptotic scaling of the parameters and variables چکیده کاملIn this work, we analyse a pair of two-dimensional coupled reaction-diusion equations known as the Gray-Scott model, in which spot patterns have been observed. We focus on stationary patterns, and begin by deriving the asymptotic scaling of the parameters and variables necessary for the analysis of these patterns. A complete bifurcation study of these solutions is presented. The main mathematical techniques employed in this analysis of the stationary patterns is the Turing instability theory. This paper addresses the question of how popula-tion diusion aects the formation of the spatial patterns in the Gray-Scott model by Turing mechanisms. In particular, we present a theoretical analysis of results of the numerical simulations in two dimensions. Moreover, there is a critical value for the system within the linear regime. Below the critical value the spatial patterns are impermanent, whereas above it stationary spot patterns can exist over time. We have observed the formation of spatial patterns during the evolution, which are sparsely isolated ordered spot patterns that emerge in thespace. In this research we focuse on three areas: rst, the biology; second, the mathematics and third, the application. We use these spatial patterns to understand the nature of disease spread and that means to understand the mechanism of interaction of the populations. There remains uncertainty in the mechanisms surrounding the genesis of how epidemics spread in their spatial enveronment. The role of mathematical modelling in understanding the spreadand control of epidemics can never be over emphised. پرونده مقاله -
دسترسی آزاد مقاله
408 - Effect of Budding Method, Rootstock Age and Cut below Budding Union on Budding Success in Persian Walnut
F. Ghamari Hesabi Y. Sharafi S.J. Tabatabaei V. GrigurianBudding is a good method of propagation in the Persian walnut (Juglans regia L.)., However, success of budding is low due to higher root pressure as well as the presence of phenolic compounds in the xylem sap. This study was conducted to compare various budding methods چکیده کاملBudding is a good method of propagation in the Persian walnut (Juglans regia L.)., However, success of budding is low due to higher root pressure as well as the presence of phenolic compounds in the xylem sap. This study was conducted to compare various budding methods and cut below budding union on two and three-year-old Persian walnut under field conditions. The experiment was conducted based on a completely randomized block design with three replications. The first factor of experiment was budding methods at three levels (T-budding, invert T-budding and patch budding). The second factor was rootstock age at two levels (two-year and three-year old rootstocks).The third factor was to make cuts in the rootstock below budding union at two levels (cut below budding and no cut below budding). The results showed that budding method and rootstock age have significant effect on early percentage of budding success. The highest percentage of budding success (100%) was observed in three-year-old rootstock with T and inverted T-budding as well as in two-year-old rootstock with patch budding and the least success were gained in inverted T-budding on two-year-old rootstocks (69%). The highest callus formation was observed in patch budding on two-year-old, which is not differed by cut below budding treatment. The least callus formation was observed in T-budding without cut on two-year old rootstock (38%). Budding methods have a significant effect on secondary success (survival) at 1%. Patch budding method with 69% survival compared to other methods had most secondary success. Generally, in this study, patch budding had more callus formation, primary and secondary success compared to other budding methods. پرونده مقاله -
دسترسی آزاد مقاله
409 - The Effect of Auxin and Oat in Combination with Casing Soil on Growth and Biochemical Components of Agaricus blazei
FATEMEH KAVIANI MEHRDAD JAFARPOURThe Effect of Auxin and Oat in Combination with Casing Soil on Growth and Biochemical Components of Agaricus blazeiFatemeh Kaviani1, Mehrdad Jafarpour 2,3*1-Master of Agriculture student, Islamic Azad University of Isfahan (Khorasgan)2- Associate Professor, Department o چکیده کاملThe Effect of Auxin and Oat in Combination with Casing Soil on Growth and Biochemical Components of Agaricus blazeiFatemeh Kaviani1, Mehrdad Jafarpour 2,3*1-Master of Agriculture student, Islamic Azad University of Isfahan (Khorasgan)2- Associate Professor, Department of Horticultural Sciences, Faculty of Agriculture, Islamic Azad University, Isfahan Branch (Khorasgan)3- Associate Professor, Edible and Medicinal Research Center, Islamic Azad University, Isfahan Branch (Khorasgan)*Corresponding author`s Email: jafarpour@khuisf.ac.irReceived: 8 March 2019 Accepted: 10 Janu 2020AbstractMushroom production using lignocellulosic waste is one of the most important recycling processes of agricultural and industrial residues, which, in addition to producing protein foods, will prevent environmental pollution. The present study was conducted in 2021 at the mushroom production center of Islamic Azad University, Isfahan (Khorasgan) Branch in a completely randomized design with 18 casing soil treatments (casing soil, SMC, vermi SMC, oat, vermi oat, and IAA with different compositions) in 3 replications. The qualitative and quantitative properties of Agaricus blazei mushroom were evaluated. The results indicated that the highest number of fruiting bodies was observed in casing soil treatment + SMC (50:50%) and the highest stipe was in casing soil treatments + oat (70:30%) and casing soil 100. The maximum diameter of the mushroom cap was obtained in casing soil treatments100 and SMC 100 + IAA, and the largest diameter of the mushroom stipe was obtained in casing soil treatment 100. In addition, casing soil treatment + vermi SMC (50:50%) showed the highest amount of nitrogen, protein and the minimum time to first pin-head formation. The highest amount of iron was observed in SMC treatment 100% and the highest amount of zinc was in casing soil treatment + oat (70:30%). Among the investigated treatments, an acceptable yield can be obtained from the substrate containing casing soil + SMC (50:50%), casing soil + oat vermicompost (70:30%), and casing soil + oat (70:30%) indicated promising results in most of the studied traits. SMC has been very effective in the growth of mushroom spawn and stimulation of the mycelium phase due to its rich mineral elements and nutrients required by mushroom spawn. On the other hand, since SMC is one of the important wastes of the mushroom production industry, which is produced in a large volume annually, can be used as a casing soil composition again, which is important in this sense. پرونده مقاله -
دسترسی آزاد مقاله
410 - Extraction and Determination of Trace Copper (II) Using Octadecyl Silica Membrane Disks Modified 1-(2-Pyridyl Azo) 2-Naphtol(Pan) in Water Samples and Paraffin-Embedded Tissues from Liver Loggerhead Turtles Specimens by FAAS
A. Moghimi M. ShabanzadehA simple and reproducible method for the rapid extraction and determination of trace amounts of copper(II) ions using octadecyl-bonded silica membrane disks modified by 1-(2-Pyridyl Azo)2-Naphtol(PAN)and Atomic Absorption Spectrometry was presented. The method was based چکیده کاملA simple and reproducible method for the rapid extraction and determination of trace amounts of copper(II) ions using octadecyl-bonded silica membrane disks modified by 1-(2-Pyridyl Azo)2-Naphtol(PAN)and Atomic Absorption Spectrometry was presented. The method was based on complex formation on the surface of the ENVI-18 DISKTM disks followed by stripping of the retained species by minimum amounts of appropriate organic solvents. The elution was efficient and quantitative. The effect of potential interfering ions, pH, ligand amount, stripping solvent, and sample flow rate were also investigated. Under the optimal experimental conditions, the break-through volume was found to about 1000mL providing a preconcentration factor of 500. In the present study, we reported the application of preconcentration techniques still continues increasingly for trace metal determinations by flame atomic absorption spectrometry (FAAS) for quantification of Cu in Formalin-fixed paraffin-embedded (FFPE) tissues from Liver loggerhead turtles. The maximum capacity of the disks was found to be 389± 4 µg for Cu2+.The limit of detection of the proposed method was 5ng per 1000mL.The method was applied to the extraction and recovery of copper in different water samples. پرونده مقاله -
دسترسی آزاد مقاله
411 - Evaluation of Aflatoxin M1 and Heavy Metal in Raw Materials and Infant Formula Produced in Pegah Dairy Plants, IRAN
Bahram Karimi Dehcheshmeh Amir Shakerian Ebrahim RahimiThis study was conducted to investigate the presence of lead (Pb), cadmium (Cd) and aflatoxin M1 in raw materials and all types of infant formula produced in Pegah Dairy Plants (PDPs) in Shahrekord, Iran. To this aim, 80 samples of raw cow’s milk, whey protein, st چکیده کاملThis study was conducted to investigate the presence of lead (Pb), cadmium (Cd) and aflatoxin M1 in raw materials and all types of infant formula produced in Pegah Dairy Plants (PDPs) in Shahrekord, Iran. To this aim, 80 samples of raw cow’s milk, whey protein, starch, vitamin and all type of infant formula were collected for 6 months during 2018-2019. Cd and Pb were measured by Graphite Furnace Atomic Absorption Spectrophotometry. Aflatoxin M1 (AFM1) samples and analyzed by ELISA technique. The incidence of contamination of AFM1 in vitamins, raw cow’s milk, whey powder, and baby formula collected from Pegah dairy plants were ND, 34, 23 and 8 ppb, respectively. The result indicated that none of aflatoxin M1 in infant formula samples exceeded FDA lead consumption guidelines. In addition, maximum mean lead in maltodextrin, starch, vitamin, raw cow’s milk, whey powder, baby oil, infant formula, immediate, whole and skim was 20, 23, ND, 49, 20, 21, 17, 17, 12, and 17 ppb, respectively. Further, the maximum cadmium content was found to be 5.5, 9.5, ND, 14, ND, 6.3, 12.30, 7.6, 9.2 and 5.4 ppb, respectively, where the value of the samples was not above the maximum recommended limits by standard of Iran, European Community (EC) and Codex Alimentarius (CAC). The average of the heavy metal (Cd and Pb) and AFM1 in the maltodextrin, starch, vitamin, raw milk, whey powder and baby oil, and the types of infant formula produced by Pegah dairy Plants (PDPs) Shahrekord was below the recommended levels by Iran standard. پرونده مقاله -
دسترسی آزاد مقاله
412 - Investigation of Heavy Metals, Aflatoxin M1 and Physicochemical Properties of Milk Used in Baby Dry Milk Formula in Shahrekord City
Bahram Karimi Dehcheshmeh Amir Shakerian Ebrahim RahimiIn this study, the characteristics of milk input to Pegah Shahrekord infant milk factory and the effect of season and month of lactation on fat percentage, protein percentage, acidity and density, the amount of lead, cadmium and aflatoxin M1(AFM1) in raw milk were measu چکیده کاملIn this study, the characteristics of milk input to Pegah Shahrekord infant milk factory and the effect of season and month of lactation on fat percentage, protein percentage, acidity and density, the amount of lead, cadmium and aflatoxin M1(AFM1) in raw milk were measured. For this purpose, 690 milk samples were collected during the autumn and winter seasons (during September2018 to March2019). The level of toxic metals, aflatoxin with HPLC and acidity, fat percentage, dry matter and protein was measured according to standard. The results showed that Mean ± S.D lead in raw milk was 12.52±1.78 ppb and Mean ± S.D cadmium content was 10.8±2.83 ppb, which was lower than the allowable amount of codex for lead and cadmium in milk. AFM1 level in raw milk was 12.44±1.87ppt (Mean ± S.D). The milk input to the plant had mean ± S.D of 2.94±0.082% protein, 3.27±0.18% fat, 11.59±0.31% solids, density 1.0299±0.0008 and acidity 14.6±0.49. Lactation season significantly altered milk protein production (P <0.05). Mean ± S.D. milk production protein was 2.94±0.082%. Lactation season did not have a significant effect on milk fat percentage (P<0.05). Mean ± S.D. percentage of milk fat produced was 3.27±0.18%. Lactation season also had a significant effect on the acidity of milk produced (P<0.05). Milk produced had the average acidity 14.6 (14.6±0.49). Lactation season did not have a significant effect on the percentage of dry matter in the produced milk (P<0.05). Mean ± S.D. dry matter of milk produced was obtained 11.59±0.31. In general, the input milk to Pegah Shahrekord infant milk factory in terms of composition and quality is in line with the reports for milk compounds in Iran and the world. پرونده مقاله -
دسترسی آزاد مقاله
413 - Application of Graphene Oxide Reinforced Hollow Fibers as a Novel Electromembrane Extraction Method for Quantitative Analysis of Dicyandiamide in Infant Formula
Maryam Rezaee Shahram Shoeibi Kamal Razavi-Azarkhiavi Mahmoud EbrahimiDicyandiamide (DCD) is a nitrogenous compound which is generally used as a fertilizer, antimicrobial and nitrogen enrichment agent in soil. Grass and drinking water contamination with DCD may lead to presence of the chemical residues in milk and infant formula. The aim چکیده کاملDicyandiamide (DCD) is a nitrogenous compound which is generally used as a fertilizer, antimicrobial and nitrogen enrichment agent in soil. Grass and drinking water contamination with DCD may lead to presence of the chemical residues in milk and infant formula. The aim of this study was to investigate a rapid, simple and accurate method for quantitation of DCD in infant formula using electromemebrane extraction with reinforced hallow fiber by graphene oxide (GO-EME). The extraction method was optimized by solvent, graphene oxide concentration, voltage, stirring speed, pH and time parameters. After extraction, DCD was analyzed by HPLC coupled with UV/Vis detector. The analytical method validation parameters including accuracy, precision, LOD and LOQ were determined to ensure the method's validity.The calibration curve with a correlation ratio of 0.999 was obtained. The recoveries were from 78.0% to 80.0%. The LOD and LOQ were 0.04 mg L-1 and 0.1 mg L-1. This study indicates that the graphen oxide-electromembrane extraction is a simple, accurate and rapid method for determination of DCD in infant formula. پرونده مقاله -
دسترسی آزاد مقاله
414 - Numerical study on the effect of input variations on bulge height in hot tube metal gas forming process
مهدی چوگان محسن لوح موسوی.Hot metal gas forming of tubes can be used in various industries such as automotive and aerospace industries. In this process tube is formed at elevated temperatures, by using gas instead of fluid pressure. Lower required pressure and low power are its advantages in co چکیده کامل.Hot metal gas forming of tubes can be used in various industries such as automotive and aerospace industries. In this process tube is formed at elevated temperatures, by using gas instead of fluid pressure. Lower required pressure and low power are its advantages in comparison to hydroforming process. In this paper, a hot metal gas bulging process of an aluminum alloy tube has been investigated by finite element method. In addition, The HMGF process was simulated by ) Dynamic, Temp-Disp, Explicit( because of the temperature distribution along the tube length, whereas temperature was simplified and assumed to be uniform in analytical method. The bulge height parameter was investigated by changing the input variations such as internal pressure, outer diameter, die entry radius, initial tube length and initial tube wall thickness in numerical method. The numerical result shows that the input variations have significant effects on tube bulge height in this process. پرونده مقاله -
دسترسی آزاد مقاله
415 - Modeling of the beam discontinuity with two analyses in strong and weak forms using a torsional spring model
مصطفی مستان آبادی علی علی جانی ابوالفضل درویزه فاطمه متقیانIn this paper, a discontinuity in beams whose intensity is adjusted by the spring stiffness factor is modeled using a torsional spring. Adapting two analyses in strong and weak forms for discontinuous beams, the improved governing differential equations and the modified چکیده کاملIn this paper, a discontinuity in beams whose intensity is adjusted by the spring stiffness factor is modeled using a torsional spring. Adapting two analyses in strong and weak forms for discontinuous beams, the improved governing differential equations and the modified stiffness matrix are derived respectively. In the strong form, two different solution methods have been presented to make an analogy between the formulation of the Euler-Bernoulli and Timoshenko theories that indicates the influence of the shear deformation in discontinuous beams. The flexural stiffness of discontinuous beams is corrected by using the Dirac’s delta function. In the weak form, the reduced stiffness matrix is derived from the strain energy equation established by the continuity, kinematics and constitutive equations. The linearity assumption of the geometry and material is considered to construct the kinematics and constitutive equations respectively. The continuity conditions mathematically connect two divided parts of the Euler-Bernoulli beam for which an improved Hermitian shape function is employed to interpolate displacement field. An application shows the comparison and validation of the results of the strong and weak forms, and also the quasi-static behavior of discontinuous beams. پرونده مقاله -
دسترسی آزاد مقاله
416 - Numerical study on the effect of hammering pressure on thickness reduction in hot tube metal gas forming process
علی طالبی انارکی محسن لوح موسویNowadays, light weight and high strength metals are being used in various industries such as automotive and aerospace. Using aluminum-magnesium alloys is an efficient way to reduce the weight of a specific part. These alloys have poor formability in room temperature thu چکیده کاملNowadays, light weight and high strength metals are being used in various industries such as automotive and aerospace. Using aluminum-magnesium alloys is an efficient way to reduce the weight of a specific part. These alloys have poor formability in room temperature thus they should be formed at elevated temperature. Warm hydroforming and hot metal gas forming are conventional methods to form aforementioned alloys. It is proven that using hammering pressure is an efficient way in order to optimize hydroforming process that it improves formability and thickness distribution. In this paper, the effect of hammering pressure on hot free bulging of an Al6063 tube is investigated numerically and the results are compared with the results of constant pressure path. Results show that reduction of thickness is greater for peak constant pressure while using hammering pressure, due to gradual thickness reduction, could improve formability and thickness distribution. Results also show that axial feeding, increase the effect of formability caused by hammering pressure. پرونده مقاله -
دسترسی آزاد مقاله
417 - Experimental Study and FEM Simulation of the Effect of Significant Parameters in the Thixoforging of the Gearbox Cap
امین کلاه دوز سلمان نوروزی محمد بخشی جویباری سید جمال حسینی پورSemi-solid forming processes are now used for producing near net shape parts especially in the automotive and aircraft industries. Non Newtonian rheology of semisolid alloys and its dependence on the various parameters such as reheating cycle, method used to produce non چکیده کاملSemi-solid forming processes are now used for producing near net shape parts especially in the automotive and aircraft industries. Non Newtonian rheology of semisolid alloys and its dependence on the various parameters such as reheating cycle, method used to produce non-dendritic structure, thermo-shear history etc. have made the simulation of the flow behavior of semisolid material a difficult mater in engineering. One of the semi-solid forming processes is thixoforging process. Thixoforming takes place between liquidous and solidous temperature and liquid phase and solid one that exists at the same time. The significant parameters in this method can be strain rate, friction and temperature terms. In this research, the simulation of thixoforging process is done using Deform-3D software and parameters such as friction factor, process temperature and rams speeds are studied. In order to verify the model, thixoforging tests were conducted with various parameters and under isothermal conditions on the A356 Alloy. The comparison of numerical results at different solid fractions with experimental data is shown. These simulations can provide an accurate model of the process. Also the simulation results had shown the effects of various parameters. Results showed that increasing the mould temperature, causes more inhomogeneous microstructure and therefore the hardness and forming force decreased %12.5 and %20.6 respectively پرونده مقاله -
دسترسی آزاد مقاله
418 - Numerical and Experimental Analysis of Forming Rectangular Copper Pipes by Successive Rolling of Round Pipe Filled With Bismuth
علی بصیرت نیا محسن لوح موسویBecause of their wide application in industries requiring high pressure and temperature, manufacturing square and rectangular pipes have attracted more attention than ever before.There are various methods such as extrusion, tensile and stress for manufacturing square pi چکیده کاملBecause of their wide application in industries requiring high pressure and temperature, manufacturing square and rectangular pipes have attracted more attention than ever before.There are various methods such as extrusion, tensile and stress for manufacturing square pipes. Another method on which studies have focused in recent years is the re-forming of round pipes in order to turn them into square or rectangular ones. The methods suggested in these researches are all applicable for the manufacture of square pipes without the possibility of manufacturing rectangular pipes. The method introduced in this paper consists of filling the pipe with bismuth and rolling it in three successive stages. In this research, first, the intended process is simulated in Abaqus software, and then a real sample is manufactured by an experimental test. The manufactured sample is checked with regard to its dimensions and is compared with the results obtained from the simulation. The results of the study show that the method of filling the pipe with bismuth and moving it through three rollers is an appropriate method for the manufacture of thin-walled pipes with rectangular cross-section. پرونده مقاله -
دسترسی آزاد مقاله
419 - Numerical Simulation of Impact of Low Velocity Projectiles With Water Surface
نجمه خضرائیان ناصر دشتیان گرامیIn this article, Finite Element Method (FEM) and Eulerian-Lagrangies Algorithm (ELA) formulation were used to numerically simulate the impact of several low-velocity projectiles with water surface. Material models which were used to express behavior of air and water inc چکیده کاملIn this article, Finite Element Method (FEM) and Eulerian-Lagrangies Algorithm (ELA) formulation were used to numerically simulate the impact of several low-velocity projectiles with water surface. Material models which were used to express behavior of air and water included Null material model. For the projectiles, rigid material model were applied. Results were validated by analyzing the impact of metallic cylinder with a water surface and then the impact of a wedge, sphere and special projectile at low-velocities were simulated. Major outputs were force and pressure applied to the projectile, variations of velocity and acceleration when entering to the water, stress-strain variations and variations of water surface in various steps of the analysis. Results showed that the impact of the structure with fluid can be modeled using finite element model with high accuracy in terms of quality and quantity.Numerical results obtained for cylinder well agrees with the available experimental data. Also the results for other projectiles show a logical trend پرونده مقاله -
دسترسی آزاد مقاله
420 - Modeling of the Beam Discontinuity with Two Analyses in Strong and Weak Forms using a Torsional Spring Model
مصطفی مستان آبادی علی علی جانی ابوالفضل درویزه فاطمه متقیانIn this paper, a discontinuity in beams whose intensity is adjusted by the spring stiffness factor is modeled using a torsional spring. Adapting two analyses in strong and weak forms for discontinuous beams, the improved governing differential equations and the modified چکیده کاملIn this paper, a discontinuity in beams whose intensity is adjusted by the spring stiffness factor is modeled using a torsional spring. Adapting two analyses in strong and weak forms for discontinuous beams, the improved governing differential equations and the modified stiffness matrix are derived respectively. In the strong form, two different solution methods have been presented to make an analogy between the formulation of the Euler-Bernoulli and Timoshenko theories that indicates the influence of the shear deformation in discontinuous beams. The flexural stiffness of discontinuous beams is corrected by using the Dirac’s delta function. In the weak form, the reduced stiffness matrix is derived from the strain energy equation established by the continuity, kinematics and constitutive equations. The linearity assumption of the geometry and material is considered to construct the kinematics and constitutive equations respectively. The continuity conditions mathematically connect two divided parts of the Euler-Bernoulli beam for which an improved Hermitian shape function is employed to interpolate displacement field. An application shows the comparison and validation of the results of the strong and weak forms, and also the static behavior of discontinuous beams پرونده مقاله -
دسترسی آزاد مقاله
421 - Experimental Study of the Voltage and Number of the Coil Rounds in Electromagnetic Forming Process of the V shape Aluminum sheets
سجاد نادیان برسیانی احمد کشاورزی امین کلاه دوزElectromagnetic power, which is one of the fast ways for forming, is used for forming workpieces without having any effect on them. Using it causes the workpieces to reach the minimum back spring and tear; consequently building the equipment like pistons will cost less چکیده کاملElectromagnetic power, which is one of the fast ways for forming, is used for forming workpieces without having any effect on them. Using it causes the workpieces to reach the minimum back spring and tear; consequently building the equipment like pistons will cost less than before. Electromagnetic power is used for forming Aluminium sheets into V shapes in this study. As the coils connect the machine and the workpieces, the number of rounds and the voltage in 10 levels will be discussed in this study. Considering the results and analysis that have been reached, the best forming occurs in the voltage of 1500 and 35 rounds. Because the machine creates a high ampere and a proper amount of rounds in this voltage in order to transfer the whole power to the workpiece. As the rounds increase to 40, the forming will decrease up to 34/3 percent پرونده مقاله -
دسترسی آزاد مقاله
422 - راهبردهای شکلگیری موثر خط مشی در حیطه سلامت نظام اداری
کرم اله دانش فرد زهرا رجائیآرمانهای دموکراسی و حکمرانی خوب نمیتوانند بدون محیط امن و سالم میسر شوند. خطمشیگذاری در حوزه سلامت نظام اداری منجر به ایجاد بستر مناسبی در ایجاد محیط امن ارائه خدمات عمومی میگردد. شکل گیری مناسب خطمشی در حوزه سلامت نظام اداری، در کشورهای درحال توسعه باید از طریق ش چکیده کاملآرمانهای دموکراسی و حکمرانی خوب نمیتوانند بدون محیط امن و سالم میسر شوند. خطمشیگذاری در حوزه سلامت نظام اداری منجر به ایجاد بستر مناسبی در ایجاد محیط امن ارائه خدمات عمومی میگردد. شکل گیری مناسب خطمشی در حوزه سلامت نظام اداری، در کشورهای درحال توسعه باید از طریق شیوههای اثرگذار و مداخله جویانه انجام گیرد، از این رو هدف اصلی مقاله حاضر شناسایی راهبردهای شکلگیری موثر خط مشی عمومی در حوزه سلامت نظام اداری میباشد. رویکرد مورد استفاده در این تحقیق کیفی میباشد که راهبردهایی از طریق مصاحبه با نمایندگان مجلس جهت شکلگیری مناسب خط مشی در حوزه سلامت نظام اداری شناسایی شدند و با تحلیل تم ارزیابی گردیدند. از مصاحبه نیمه ساختاریافته جهت جمع آوری اطلاعات استفاده شد و با کمک تحلیل تم راهکارها ارزیابی گردیدند، و تم ظرفیتسازی با در نظر گرفتن تناسب روشهای سنتی و الکترونیک بهعنوان راهکار کاربردی پیشنهادی توسط نمایندگان در مرحله مصاحبه ارائه شده است. علاوه بر این راهبردها برای شکلگیری اثربخش خطمشی در حوزه سلامت نظام اداری دارای 11 تم فرعی و 44 کد اولیه بود که در 8 تم اصلی خلاصه گردید. پرونده مقاله -
دسترسی آزاد مقاله
423 - اثر مالچ پلاستیک و بستر کاشت بر عملکرد ذرت دانهای (KSC 704) در فرونشانی علفهای هرز
محسن گرشاسبی حمیدرضا رجبلاریجانی محمد نصریبه منظور مطالعه اثر مالچ و شکل بستر کاشت بر عملکرد کمی و کیفی ذرت دانه ای و توان رقابتی علف های هرز آزمایشی در سال زراعی 91-1390 در مزرعه تحقیقاتی دانشگاه آزاد اسلامی واحد ورامین- پیشوا انجام شد. این تحقیق به صورت کرت های خرد شده (اسپلیت پلات) در قالب طرح آماری بلوک های چکیده کاملبه منظور مطالعه اثر مالچ و شکل بستر کاشت بر عملکرد کمی و کیفی ذرت دانه ای و توان رقابتی علف های هرز آزمایشی در سال زراعی 91-1390 در مزرعه تحقیقاتی دانشگاه آزاد اسلامی واحد ورامین- پیشوا انجام شد. این تحقیق به صورت کرت های خرد شده (اسپلیت پلات) در قالب طرح آماری بلوک های کامل تصادفی در سه تکرار اجرا شد. بستر کاشت در سه سطح (بستر تخت، بستر برآمده و روش مرسوم) به عنوان عامل اصلی و مالچ و بدون مالچ در سه سطح (خاک پوشیده با مالچ پلاستیک سفید روی سیاه، خاک بدون مالچ و عاری از علف های هرز و خاک بدون مالچ با تداخل علف هرز) به عنوان عامل فرعی در نظر گرفته شد. نتایج نشان داد مالچ پلاستیک سفید روی سیاه در تمام اشکال بستر منجر به کنترل 99درصدی علف های هرز گردید. مالچ موجب سرعت بخشیدن به رشد گیاه ذرت در مقایسه با زمین بدون مالچ گردید. اثر متقابل مالچ × شکل بستر معنی دار بود و بیش ترین عملکرد دانه در تیمار مالچ و بستر تخت ( kg.ha-16/11031) به دست آمد. همچنین شکل بستر تاثیر معنی داری بر شاخص برداشت، عملکرد دانه، تعداد دانه در بلال، تعداد دانه در ردیف و تعداد ردیف داشت. مالچ نیز اثر معنی داری بر بیوماس کل، شاخص برداشت، عملکرد دانه، تعداد دانه در بلال، تعداد دانه در ردیف و تعداد ردیف داشت. استفاده از بستر تخت بیش ترین تعداد دانه در بلال و ردیف در بلال را داشت و بستر برآمده نیز بیش ترین وزن هزار دانه و تعداد ردیف در بلال را داشت. در حالت استفاده از مالچ تعداد دانه در بلال، دانه در ردیف و تعداد ردیف بیش تر گردید و در نهایت نشاندهنده تعداد دانه بیش تر است. پرونده مقاله -
دسترسی آزاد مقاله
424 - گزارش یک مورد ابتلاء به مارک کانونی همراه با انسداد در ژئوژنوم مرغ تخمگذار
فریبرز معـیّر پیام حقیقی خوشخوبیماری مارک از بیماری های ویروسی رایج نئوپلاستیک و لنفوپرولیفراتیو ماکیان است که ارگانهای مختلف را در بدن مبتلا می نماید. ویروس مولد این بیماریکه یک هرپس ویروس لنفوتروپیک می باشد موجب بروز ضایعات پاتولوژیک مختلف در بسیاری از گله های مرغ گوشتی و تخمگذار در نقاط مختلفجهان چکیده کاملبیماری مارک از بیماری های ویروسی رایج نئوپلاستیک و لنفوپرولیفراتیو ماکیان است که ارگانهای مختلف را در بدن مبتلا می نماید. ویروس مولد این بیماریکه یک هرپس ویروس لنفوتروپیک می باشد موجب بروز ضایعات پاتولوژیک مختلف در بسیاری از گله های مرغ گوشتی و تخمگذار در نقاط مختلفجهان گردیده است.در این گزارش فرم کانونی بیماری مارک در توده برجسته ای به طول 5سانتی متر که موجب انسداد ناحیه ژئوژنوم یک مرغ تخمگذار شده بود، تشخیص دادهشد. در بررسی میکروسکوپی نفوذ شدید سلولهای چند شکلی تک هسته ای شامل لنفوسیت های کوچک و متوسط، لنفوبلاست ها، سلولهای اختصاصی مارکو تعدادی پلاسماسل، ماکروفاژ و سلول های هتروفیل در تمامی لایه های روده از ویلی ها تا زیر مخاط و عضلات مشاهده شد که موجب آتروفی، دژنرسانسو درنهایت از بین رفتن بافت طبیعی ناحیه مبتلا شده بود. سلولهای نئوپلاستیک دارای پلئومورفیسم مشخص بوده و مراحل مختلف میتوز در آنها یافت می شد پرونده مقاله -
دسترسی آزاد مقاله
425 - آسیبشناسی نسبت میان فرهنگ سیاسی و توسعه سیاسی در ایران
محمد ابوالفتحی محمدکریم محمدیانقلاب شکوهمند اسلامی تحولی ژرف در کل تاریخ ایران به شمار میآید که دستاوردهای بزرگی که قابل قیاس با دوران گذشته نیست با خود به همراه آورده است. اما در زمینه توسعه سیاسی علیرغم بهبود نسبت به دوران گذشته با وضعیت مطلوبی که شایسته نظام اسلامی است فاصله بسیار دارد. این مق چکیده کاملانقلاب شکوهمند اسلامی تحولی ژرف در کل تاریخ ایران به شمار میآید که دستاوردهای بزرگی که قابل قیاس با دوران گذشته نیست با خود به همراه آورده است. اما در زمینه توسعه سیاسی علیرغم بهبود نسبت به دوران گذشته با وضعیت مطلوبی که شایسته نظام اسلامی است فاصله بسیار دارد. این مقاله در تلاش است با طرح این پرسش که فرهنگ سیاسی چه تاثیری در مقوله توسعه سیاسی داشته است؟ با رهیافتی فرهنگی به آسیب شناسی این مساله بپردازد. از اینرو به آزمون فرضیهای پرداخته که فرهنگ سیاسی را به مثابه عامل عمده در عدم تحقق توسعه سیاسی به شمار آورده است. در این راستا با توجه به رهیافت های مطالعاتی مختلف، مهمترین مولفههای فرهنگ سیاسی را استخراج نموده است و نشان داده که وضعیت فرهنگی از قبل موجود که همچنان تداوم دارد، با فرهنگ مدنی که مناسبترین فرهنگ برای یک نظم دموکراتیک است فاصله بسیار دارد. از اینرو فرهنگ سیاسی در ایران نه تنها بستر مناسبی برای توسعه سیاسی فراهم ننموده، بلکه خود به اصلیترین مانع این مساله تبدیل شده است. بررسی نسبت میان فرهنگ سیاسی با مقولاتی همچون الگوی اقتدار، الگوی مشارکت، تجربه تحزب در ایران ونحوه تعامل با بیگانگان، به درستی موید این مدعا است. بنابراین توسعه سیاسی در ایران قبل از هر چیز دیگر مستلزم بسترسازی فرهنگی است. پرونده مقاله -
دسترسی آزاد مقاله
426 - بررسی تأثیر وزن بر قالب و مبانی فکری با مقایسه اوزان قصاید ناصر خسرو و غزلیات سعدی
مالک شعاعی الهام جوانیوزن، برجستهترین عنصر شعر و نقطهی اشتراک شاعران است. در حقیقت وزن، طبیعت و ذات شعر است و برخی چنان شیفته وزناند که شعر را بدون آن تصور نمیکنند. به منظور بررسی تأثیر وزن بر محتوا و قالب، این پژوهش به مقایسهی اوزان قصاید ناصر خسرو و غزلیات سعدی پرداخته است. در غزلیات چکیده کاملوزن، برجستهترین عنصر شعر و نقطهی اشتراک شاعران است. در حقیقت وزن، طبیعت و ذات شعر است و برخی چنان شیفته وزناند که شعر را بدون آن تصور نمیکنند. به منظور بررسی تأثیر وزن بر محتوا و قالب، این پژوهش به مقایسهی اوزان قصاید ناصر خسرو و غزلیات سعدی پرداخته است. در غزلیات سعدی و قصاید ناصرخسرو 18 وزن مشترک دیده میشود. مجموع اوزان اختصاصی سعدی 17 و مجموع اوزان مختص ناصرخسرو 6 وزن است از آنجا که تعداد غزلیات سعدی بیش از 2.5 برابر قصاید ناصرخسرو است رعایت نسبت (2.63) غزلیات سعدی به قصاید ناصر خسرو در اوزان اختصاصی هر دو شاعر دیده میشود. چنین استنباط میگردد تأثیر وزن و قالب بر مبانی تعلیمی و فلسفی غزل و قصیده ناچیز است و حتی میتوان علیرغم ظرفیت وزن در شعر، ارتباطی بسیار ضعیف بین وزن با قالب قصیده و غزل، همچنیین وزن با محتوای غزل و قصیده یافت. بهرهگیری کمتر یا بیشتر از هر وزن را با توجه به عوامل متنوعی که ممکن است بر این رفتار مؤثر باشد، باید تحلیل کرد. پرونده مقاله -
دسترسی آزاد مقاله
427 - زیست چینه نگاری، پالئواکولوژی و محیط رسوبی سازند آسماری در ميدان نفتي پازنان
پروانه روزبهانیچکیده در این تحقیق ویژگیهای زیست چینه ای ، پالئواکولوژی و محیط رسوبی سازند آسماری در میدان نفتی پازنان در چاه شماره 121 مورد مطالعه قرار گرفته است . بر اساس این مطالعات ، سن سازند آسماری با ضخامت 334 متر ، الیگوسن پسین(شاتین) تا میوسن پیشین (بوردیگالین) تعیین شد و بر ا چکیده کاملچکیده در این تحقیق ویژگیهای زیست چینه ای ، پالئواکولوژی و محیط رسوبی سازند آسماری در میدان نفتی پازنان در چاه شماره 121 مورد مطالعه قرار گرفته است . بر اساس این مطالعات ، سن سازند آسماری با ضخامت 334 متر ، الیگوسن پسین(شاتین) تا میوسن پیشین (بوردیگالین) تعیین شد و بر اساس روزن بران کف زی شناخته شده ، سه زون زیستی تجمعی معرفی گرديد. مطالعات رسوب شناسی ، منجر به شناسايي 9 ريزرخساره گرديد و با توجه به خصوصيات ريزرخساره ها نشان داد سازند آسماری در محیط های رسوبی دریای باز ، لاگون محصور ، لاگون نیمه محصور و محیط سدی نهشته شده است .مطالعات پالئواکولوژی نیز نشان داد سازند آسماري در زمان شاتين با وفور فرامینفرا با پوسته های آهکی هیالین در محيط دریاي باز باشوری نرمال psu35-40 با زون نوری اليگوفوتيک ، افوتيک و تحت رژیم غذایی اليگوتروفی تا مزوتروفی و در زمان آکی تانين تا بوردیگالين با وفور فرامینفرا با پوسته های آهکی پرسلانوز در شرایط هایپر سالین در محيط لاگون نيمه محصور با شوريpsu45-50 و در لاگون محصور با شوري بيش ازpsu50، در زون نوری یوفوتیک تحت رژیم غذایی یوتروفی و هایپر تروفی در پلاتفرم کربناته از نوع رمپ هموکلینال در نواحی گرمسیری تا نیمه گرمسیری نهشته گردیده است. پرونده مقاله -
دسترسی آزاد مقاله
428 - آسیب شناسی خزش شهری در کلانشهر تبریز
کیومرث محمودیان اکبر عبدالله زاده طرف حسین اسمعیلی سنگری میرسعید موسویفرم خزش شهری یا پراکنده رویی به معنی رشد و گسترش ساختمانی و فیزیکی شهر بر روی بسترهای محیط طبیعی بلافصل شهر است که زمینه مصرف فزاینده زمین و تهدید منابع آب و خاک و ناپایداری توسعه شهری را به دنبال دارد. اقتصاد سیاسی شهری در بسیاری از کشورهای معروضِ اسپرال شهری، حکایت از چکیده کاملفرم خزش شهری یا پراکنده رویی به معنی رشد و گسترش ساختمانی و فیزیکی شهر بر روی بسترهای محیط طبیعی بلافصل شهر است که زمینه مصرف فزاینده زمین و تهدید منابع آب و خاک و ناپایداری توسعه شهری را به دنبال دارد. اقتصاد سیاسی شهری در بسیاری از کشورهای معروضِ اسپرال شهری، حکایت از تبدیل شدن زمین و مسکن شهری به وضعیت کالایی شدید و فقدان زیرساخت های مناسب صنعت و کار و اشتغال در بخش های دیگر است. متناسب با فرم دگرگون یافته فضا ناشی از اسپرال شهری، مدیریت و راهبری موضعات و مسایل مرتبط با فضا نیازمند الگوهای جدید و نو است. منطقه شهری تبریز از جمله محدودههایی میباشد که در دهههای اخیر به دلیل ارزانی زمین و مسکن، وجود پتانسیلهای بالقوه و موقعیت منطقهای خویش، همواره مورد توجه مهاجران قرار گرفته است و امروزه پدیده خزش شهری در آن مشکلات متعددی را در جنبههای مختلف ایجاد کرده است. از این رو پژوهش حاضر با روش توصیفی-تحلیلی، کاربردی و اکتشافی به نقش پديده خزش شهري در تحولات مکاني-فضايي سکونتگاههاي حريم کلانشهر تبریز پرداخته است. اقتصاد سیاسی شهری در بسیاری از کشورهای معروضِ خزش شهری، حکایت از تبدیل شدن زمین و مسکن شهری به وضعیت کالایی شدید و فقدان زیرساخت های مناسب صنعت و کار و اشتغال در بخش های دیگر است. کلید – واژه ها: خزش شهری، آسیب شناسی، فرم فضایی، رشد پرونده مقاله -
دسترسی آزاد مقاله
429 - شناسایی مولفه های فرهنگی و اجتماعی تحکیم خانواده در راستای پیشگیری از طلاق با تاکید بر پایگاه اجتماعی (مطالعه موردی خانواده های زیر 5 سال تشکیل شهر تهران)
حامد محمدی مهرداد نوابخشچکیدهخانواده به عنوان مهم ترین کانون بشری، عنصر اساسی در تشکیل، پیشرفت و موفقیت یک جامعه و ملت است، لذا سعادت هر جامعه ای منوط به نیک بختی خانواده های آن جامعه است. بنابراین، باید هر چه بیشتر در جهت نیل به سعادتمندی آن کوشید. که دست یابی به این مهم تنها از طریق شناسایی چکیده کاملچکیدهخانواده به عنوان مهم ترین کانون بشری، عنصر اساسی در تشکیل، پیشرفت و موفقیت یک جامعه و ملت است، لذا سعادت هر جامعه ای منوط به نیک بختی خانواده های آن جامعه است. بنابراین، باید هر چه بیشتر در جهت نیل به سعادتمندی آن کوشید. که دست یابی به این مهم تنها از طریق شناسایی کامل عوامل تحکیم بنیان خانواده امکان پذیر است. آمار رسمی طلاق مبین این مهم است که سهم قابل توجهی از طلاق ها در همان 5 سال ابتدای زندگی مشتر و به ویژه 2 سال اول رخ بی دهد. بر این اساس شناخت مولفه های تحکیم بخش خانواده در 5 سال نخست از درجه بالایی از اهمیت برخوردار است. به واقع این پژوهش مرحله دوم از یک پژوهش 3 مرحله ای قلمداد می شود و نتایج و خروجی های آن به عنوان ورودی در مراحل بعدی تحقیق مورد استفاده قرار خواهد گرفت.تحقیق حاضر با استفاده از روش اسنادی و میدانی و تکنیک پرسشنامه و برای 390 نفر از زوجین جوان که کمتر از 5 سال از تشکیل خانواده ایشان می گذرد، به اجرا در آمده است. نتایج این پژوهش نشان دهنده این است که حدود 60 درصد از نمونه آماری پژوهش حاضر اقدام به ازدواج های ناهمسان نموده اند. پر واضح است که ناهمسانی در ازدواج ناهمسانی در پایگاه اجتماعی زوجین را در بر خواهد داشت. با توجه به بخش دیگر یافته های پژوهش حاضر که مبین رابطه بین پایگاه اجتماعی و تحکیم بنیان خانواده می باشد می توان گفت افزایش ناهمسان همسری در جامعه مورد مطالعه یکی از دلایل افرایش طلاق ها در 5سال اولیه زندگی می باشد. پرونده مقاله -
دسترسی آزاد مقاله
430 - ویژگیهای روانسنجی فرم بازسازی شده پرسشنامه شخصیتی چندمحوری مینه سوتا- نوجوان (MMPI-ARF) در نوجوانان ارجاعی به مراکز مشاوره شهر تهران
ریحانه ریحانی کامبیز کامکاری فیروز کیومرثیدر این پژوهش به بررسی ویژگیهای روانسنجی فرم بازسازیشده پرسشنامه شخصیتی چندمحوری مینهسوتا-نوجوان (MMPI-ARF) در نوجوانان ارجاعی به مراکز مشاوره شهر تهران پرداخته و سوال اصلی تحقیق به این صورت مطرح است که آیا این ابزار از ویژگیهای مطلوب روانسنجی برخوردار است یا خیر؟ چکیده کاملدر این پژوهش به بررسی ویژگیهای روانسنجی فرم بازسازیشده پرسشنامه شخصیتی چندمحوری مینهسوتا-نوجوان (MMPI-ARF) در نوجوانان ارجاعی به مراکز مشاوره شهر تهران پرداخته و سوال اصلی تحقیق به این صورت مطرح است که آیا این ابزار از ویژگیهای مطلوب روانسنجی برخوردار است یا خیر؟ طرح تحقیق پژوهش حاضر توصیفی از نوع زمینهیابی است. جامعه آماری را تمامی نوجوانان 12 تا 18 ساله که در شهر تهران به مراکز مشاوره مراجعه کردهاند تشکیل دادهاند. 300 نوجوان با استفاده از روش نمونه گیری غیرتصادفی از نوع اتفاقی و در دسترس انتخاب شدند. ابزار مورد استفاده در این پژوهش، فرم بازسازیشده پرسشنامه شخصیتی چندمحوری مینهسوتا- نوجوان (MMPI-ARF) میباشد که توسط کامکاری و شکرزاده استانداردسازی شده است. به منظور تعیین ضریب اعتبار پرسشنامه از دو روش آلفای کرونباخ و روش دونیمهکردن آزمون استفاده شده است؛ همچنین به منظور بررسی روایی همزمان، از پرسشنامه بالینی میلون نوجوان-2 (MACI- II) استفاده شده است. یافتهها نشان داد که ضرایب اعتبار با دو روش آلفای کرونباخ و دونیمه کردن آزمون، در مقیاسهای نارسایی هیجانی، ضعف روحیه، هیجانات منفی مختل کننده، خودتردیدی، نگرشهای منفی به مدرسه، کمرویی، پرخاشگری درونی، روانپریشی و درونگرایی بالاتر از 70/0 بوده که نشاندهنده ضرایب اعتبار مطلوب این مقیاسها در نوجوانان ارجاعی به مراکز مشاوره شهر تهران میباشد. یافته ها همچنین نشان داد که این ابزار با پرسشنامه بالینی میلون نوجوان-2 دارای روایی همزمان است. در نهایت میتوان نتیجه گرفت که این پرسشنامه از ویژگیهای روانسنجی مطلوبی برخوردار است. پرونده مقاله -
دسترسی آزاد مقاله
431 - استانداردسازی فرم بازسازی شده پرسشنامه شخصیتی چندوجهی مینهسوتا- نوجوان (MMPI-ARF) در دانشآموزان مدارس راهنمایی شهرستان آققلا
اعظم تازکی کامبیز کامکاریاین تحقیق به استانداردسازیMMPI-ARFفرم بازسازی شده پرسشنامه شخصیتی چندمحوری مینه سوتا- نوجوان در دانش آموزان مدارس راهنمایی شهرستان آق قلا پرداخته است. سؤال اصلی تحقیق این است که آیا فرم بازسازی شده پرسشنامه شخصیتی چندوجهی مینه سوتا نوجوان (MMPI-ARF) در دانش آموزان مدارس چکیده کاملاین تحقیق به استانداردسازیMMPI-ARFفرم بازسازی شده پرسشنامه شخصیتی چندمحوری مینه سوتا- نوجوان در دانش آموزان مدارس راهنمایی شهرستان آق قلا پرداخته است. سؤال اصلی تحقیق این است که آیا فرم بازسازی شده پرسشنامه شخصیتی چندوجهی مینه سوتا نوجوان (MMPI-ARF) در دانش آموزان مدارس راهنمایی شهرستان آق قلا دارای ویژگی های روان سنجی مطلوب است؟ روش تحقیق در حیطه تحقیقات روش شناختی با تأکید بر روان سنجی قرار می گیرد. جامعةآماری تمامی دانش آموزان مدارس راهنمایی شهرستان آق قلا به تعداد 3239 نفر (1056 نفر دانش آموز دختر، 1699 نفر دانش آموز پسر و 34 نفر دانش آموز مدرسه غیرانتفاعی پسر) هستند، که تعداد 100 نفر با روش نمونه گیری در دسترس، به عنوان حجم نمونه انتخاب شدند. ابزار مورد استفاده در این پژوهش فرم بازسازی شده شخصیتی چندوجهی مینه سوتا- نوجوان (MMPI-ARF) است که دارای روایی و اعتبار مطلوبی است. به منظور تعیین ضریب اعتبار پرسشنامه با تأکید بر تجانس درونی سؤالها از دو روش آلفای کرانباخ و روش آزمون- بازآزمون در راستای بررسی ضریب ثبات استفاده شده است. برای بررسی ضرایب روایی از روایی ملاکی از نوع همزمان استفاده شده که به این منظور از پرسشنامه سنجش ابعاد آسیب شناسی شخصیت (DAPP-BQ) و همبستگی دو پرسشنامه مذکور با استفاده از ضریب همبستگی پیرسون و در نهایت، از روایی سازه از نوع سلسله مراتبی و تعیین ضریب وضوح گرایی استفاده شده است. یافته ها نشان داد که تمامی ضرایب اعتبار بالاتر از 84/0 با روش آلفای کرانباخ و ضرایب بالاتر از 89/0 با روش آزمون- باز آزمون با اصلاح اسپیرمن- براون بوده که نشان دهنده ضریب اعتبار مطلوب پرسشنامه حاضر در 28 مقیاس مورد بررسی است. همچنین، فرم بازسازی شده پرسشنامه شخصیتی چندوجهی مینه سوتا نوجوان (MMPI-ARF) با پرسشنامه سنجش ابعاد آسیب شناسی شخصیت در نوجوانان مدارس راهنمایی آق قلا دارای روایی همزمان است. در نهایت، مشخص شد که فرم بازسازی شده پرسشنامه شخصیتی چندوجهی مینه سوتا نوجوان (MMPI-ARF) دارای ساختار درونی بوده و شامل 28 مقیاس و چهار عامل است. پرونده مقاله -
دسترسی آزاد مقاله
432 - «مثنوی» و «غزل» دو عرصۀ تجلی شعر فارسی و منزلت مولانا در این دو قلمرو
منوچهر دانشپژوهمیدانیم که در شعر فارسی دری، 10 قالب شعری عرصۀ هنرنمایی سخنوران توانای پارسیگوی در بیش از هزار سال بوده است، اما هم از نظر حجم و کمیت و هم از حیث دلنشینی و کیفیت این قالبها در یک ردیف نیست و چند قالب شعری، بیش از دیگر قالبها ارزش شعر فارسی را نمایان ساخته است. از چکیده کاملمیدانیم که در شعر فارسی دری، 10 قالب شعری عرصۀ هنرنمایی سخنوران توانای پارسیگوی در بیش از هزار سال بوده است، اما هم از نظر حجم و کمیت و هم از حیث دلنشینی و کیفیت این قالبها در یک ردیف نیست و چند قالب شعری، بیش از دیگر قالبها ارزش شعر فارسی را نمایان ساخته است. از میان آن چند قالب مثنوی و غزل جایگاهی ویژه دارد. مولانا در این دو عرصه شهرتی تمام یافت و با سرودن مثنوی و غزلیات شمس بدین دو قالب شعری، اعتباری خاص بخشید. پرونده مقاله -
دسترسی آزاد مقاله
433 - محیط رسوبی، کیفیت مخزنی و زیست چینهنگاری سازند داریان در یکی از میادین جنوب شرقی خلیج فارس
مینا سادات هاشمی داود جهانی سید محسن آل علی علی کدخدایی بیتا اربابچکیده در مطالعه نهشت ههای سازند داریان )شعیبا( در یکی از میادین جنوب شرقی خلیج فارس، محیط رسوبی و زیست چینهنگاری این نهشتهها بر روی مغز ههای اخذ شده از این سازند مورد بررسی قرار گرفت. در مطالعات محیط رسوبی هفت ریزرخساره کربناته و یک ریزرخساره ترکیبی کربناته- آواری شن چکیده کاملچکیده در مطالعه نهشت ههای سازند داریان )شعیبا( در یکی از میادین جنوب شرقی خلیج فارس، محیط رسوبی و زیست چینهنگاری این نهشتهها بر روی مغز ههای اخذ شده از این سازند مورد بررسی قرار گرفت. در مطالعات محیط رسوبی هفت ریزرخساره کربناته و یک ریزرخساره ترکیبی کربناته- آواری شناسایی گردید که نمایانگر نهشته شدن سازند داریان در چهار کمربند رخسارهای رمپ داخلی، رمپ میانی، رمپ خارجی و حوضه ژر ف میباشد. همچنین تغیبرات یکنواخت رخسارهای، نبود رودیستهای تشکیلدهنده ریفهای بزرگ و جایگزینی جلبک لیتوکودیوم با آنها، نشانگر محیط رمپ کربناته هموکلینال است. همچنین مطالعه میکروسکوپی ریزرخساره نمدر مطالعات زیست چینهنگاری برمبنای روزنداران و جلبک های آهکی نیز، پنج بایوزون شامل بایوزون های تجمعی یا اسمبلیج زون، رنج زون، و فراوانی یا آکمی زون مورد شناسایی قرار گرفت که پنج بایوزون معرفی شده نمایانگر سن آپتین برای این سازند میباشد. با تلفیق مطالعات زمینشناسی ، نتایج بدست آمده از آنالیز معمولی مغزهها و ارزیابی نمودارهای پتروفیزیکی، کیفیت مخزنی این سازند نیز مورد مطالعه قرار گرفت که بیانگر کیفیت مخزنی خوب در بخشهایی از این نهشتهها و به خصوص افقهای حاوی جلبک لیتوکودیوم بود که بر مبنای آن سازند داریان در زمره سازندهای مخزنی مهم در شرق خلیج فارس میباشد. پرونده مقاله -
دسترسی آزاد مقاله
434 - بررسی ساختار عاملی، اعتبار و روایی پرسشنامه اضطراب کودکان و نوجوانان (5-YAM) مبتنی بر DSM-5
علی پیرزاد قاسم آهیدر ویرایش پنجم کتاب راهنمای تشخیصی و آماری اختلالات روانی، نسبت به ویرایشهای قبلی تغییرات عمدهای صورت گرفته است هدف این پژوهش بررسی ساختار عاملی، اعتبار و پایایی پرسشنامه اضطراب کودکان و نوجوانان (5-YAM) مبتنی بر DSM-5 بود. برای این منظور، طی یک پژوهش توصیفی با رویکرد چکیده کاملدر ویرایش پنجم کتاب راهنمای تشخیصی و آماری اختلالات روانی، نسبت به ویرایشهای قبلی تغییرات عمدهای صورت گرفته است هدف این پژوهش بررسی ساختار عاملی، اعتبار و پایایی پرسشنامه اضطراب کودکان و نوجوانان (5-YAM) مبتنی بر DSM-5 بود. برای این منظور، طی یک پژوهش توصیفی با رویکرد تحلیل عاملی، 300 نفر از دانش آموزان 12 تا 18 ساله شهر بیرجند به روش نمونهگیری خوشهای انتخاب و با پرسشنامه اضطراب کودکان و نوجوانان و فرم کوتاه مقیاس غربالگری اضطراب مرتبط با اختلالات هیجانی کودکان و نوجوانان (SCARED-71) مورد ارزیابی قرار گرفتند. نتایج پژوهش نشان داد که اعتبار درونی بخش I پرسشنامه اضطراب کودکان و نوجوانان در دامنه 71/0 تا 90/0 و برای بخش II ، 65/0 تا 91/0 بود. روایی ملاکی پرسشنامه با استفاده از مقیاس غربالگری اضطراب مرتبط با اختلالات هیجانی کودکان و نوجوانان نشان داد که بین پرسشنامه YAM-5 با مولفههای مقیاس غربالگری اضطراب کودکان و نوجوانان در دامنهای از 12/0 تا 74/0 همبستگی مثبت و معنادار وجود دارد. روایی به شیوه همسانی درونی نشان داد که همبستگی بین مولفههای پنجگانه هر بخش باهمدیگر که در دامنهای از 38/0 تا 56/0 قرار میگیرد، در مقایسه با همبستگی مولفههای پنجگانه با نمره کل که در دامنه بین 69/0 تا 83/0 هستند، پایینتر است. با توجه به نتایج پژوهش حاضر، همچنین اهمیت سنجش اختلالات اضطرابی کودکان و نوجوانان، در دسترس نبودن ابزارهای مناسب هنجاریابی شده در کشور ما و تایید اعتبار و روایی پرسشنامه اضطراب کودکان و نوجوانان (YAM-5) مبتنی بر DSM- 5 استفاده از این ابزار به متخصصان و پژوهشگران پیشنهاد میشود. پرونده مقاله -
دسترسی آزاد مقاله
435 - ساختارعاملی، روابط بینعاملی و اعتبار نسخه مقدماتی مقیاس سلامت روانشناختی نوجوان- فرم گزارش معلم
سعید اکبری زردخانه نادر منصورکیایی علی محمد زنگانه فاطمه عرفانی فر محسن جلالت دانش سیدمحمد شاهورانی سیامک طهماسبی گرمتانی سید عین الله طیموری فردنوجوانان درخطر مشکلات رفتاری و هیجانی جدی هستند.بسیاری از اختلالاتی که برای اولین بار در دوره بزرگسالی، تشخیص داده می شود، در اواخر نوجوانی ریشه دارند. هدف پژوهش حاضر ساخت نسخه مقدماتیِ مقیاسِ سلامت روانشناختی نوجوانان- گزارش معلم، بود. برای این منظور طی یک پژوهش توصیف چکیده کاملنوجوانان درخطر مشکلات رفتاری و هیجانی جدی هستند.بسیاری از اختلالاتی که برای اولین بار در دوره بزرگسالی، تشخیص داده می شود، در اواخر نوجوانی ریشه دارند. هدف پژوهش حاضر ساخت نسخه مقدماتیِ مقیاسِ سلامت روانشناختی نوجوانان- گزارش معلم، بود. برای این منظور طی یک پژوهش توصیفی، 207 معلم از استان های فارس، سیستان وبلوچستان، کرمانشاه، خراسان رضوی، آذربایجان شرقی و البرز به شیوهِی نمونه گیری دردسترس، انتخاب و به ا مقیاس سلامت روانشناختی- متوسطه دوم و نسخه گزارش معلم مقیاس مشکلات رفتاری پاسخ دادند. تحلیل عاملی اکتشافی و همبستگی میان خردهمقیاس های دو ابزار پژوهش نشان داد که الگوی 7 مولفهای، بهترین مدل براساس آسیب شناسی نظری این مطالعه است. همچنین ضرایب همبستگی خرده مقیاس های مقیاس سلامت روانشناختی با ابعاد نسخه گزارش معلم مقیاس مشکلات رفتاری آخنباخ، حاکی از روایی ملاکی مناسبِ این ابزار بود. در مجموع، یافته های این مطالعه نشان می دهد که مقیاس سلامت روانشناختی نوجوان-فرم معلم از کفایت روان سنجی لازم برای غربالگری مشکلات رفتاری دانش آموزان متوسطه دوم برخوردار است. پرونده مقاله -
دسترسی آزاد مقاله
436 - بررسی فرایند طرح مسئله به عنوان ابزار ارزشیابی
Nasim Asghary ربابه افخمی بنائم ahmadreza haghighiطرح مسئله فرصتی به دانش¬آموزان برای آنچه که باید بدانند و بتوانند دانش ریاضی خود را بسازند فراهم می¬کند و به معلمین اجازه می¬دهد تا الگوهای درک و یادگیری ریاضیات را در دانش¬آموزان با به چالش کشیدن تفکر آنها در موقعیت¬های طرح مسئله مشاهده کنند. ارزشیابی تکوینی در کلاس¬ه چکیده کاملطرح مسئله فرصتی به دانش¬آموزان برای آنچه که باید بدانند و بتوانند دانش ریاضی خود را بسازند فراهم می¬کند و به معلمین اجازه می¬دهد تا الگوهای درک و یادگیری ریاضیات را در دانش¬آموزان با به چالش کشیدن تفکر آنها در موقعیت¬های طرح مسئله مشاهده کنند. ارزشیابی تکوینی در کلاس¬های درس، به منظور آگاهی یافتن از میزان و نحوه یادگیری دانش¬آموزان برای تعیین نقاط قوت و ضعف یادگیری آنها از اهمیت بالایی برخوردار است. لذا این مطالعه، به بررسی فرایند طرح مسئله به عنوان ابزار ارزشیابی پرداخته است. جامعه آماری این پژوهش کلیه دانش آموزان پایه نهم شهر تهران می¬باشد. در این مطالعه 64 نفر دانش¬آموز دختر پایه نهم به عنوان نمونه در دسترس انتخاب شدند. این مطالعه از نظر هدف، کاربردی و از نظر اجرا آزمایشی، نیمه¬تجربی است. به این منظور، آزمون¬های محقق ساخته بر اساس چارچوب طرح مسئله استویانوا و الرتن(1996) طراحی گردید. بررسی سؤالات طبق مدل ویسترو-یو(2009)، مدل یپ بان هار و پای هات(2008) و طبق مطالعه سیلور و کای (2005) انجام شد. تجزیه و تحلیل آزمون¬ها به صورت کمی-کیفی صورت گرفت. همچنین روایی صوری و محتوایی آزمون¬ها توسط اساتید آموزش ریاضی تأیید شد و ضریب آلفای کرونباخ 74/0 بدست آمد. بر اساس نتایج به دست آمده بیش از دو سوم دانش¬آموزان قادر به ترکیب موضوعات مختلف از مفاهیم ریاضی در طرح مسئله¬ها نبودند و این نتیجه عدم درک آنها را در ارتباط دادن مفاهیم به یکدیگر را نشان داد. همچنین با توجه به ساختار و حل مسئله¬های طرح شده توسط دانش¬آموزان برخی بدفهمی¬های دانش¬آموزان از مفاهیم ریاضی استخراج گردید. همچنین طرح مسئله¬های کلامی واقعی در نیمی از دانش¬آموزان نشان داد فرصت های طرح مسئله، موجب افزایش درك آنها از مفاهیم شده است. در مسئله¬های کلامی غیر واقعی طرح شده درك دانش آموزان ازمفاهیم به کار رفته در این مسئله¬ها رویه¬ای است و نه مفهومی. پرونده مقاله -
دسترسی آزاد مقاله
437 - Investigation of Stress in the Perforated Plate with the Presence of Edge Crack
Hamed BazvandiThe phenomenon of failure in objects is one of the major issues that human beings have been facing for a long time, and because of advances in technology in the present age, this issue is more important than in the past.All engineering materials, on the other hand, have چکیده کاملThe phenomenon of failure in objects is one of the major issues that human beings have been facing for a long time, and because of advances in technology in the present age, this issue is more important than in the past.All engineering materials, on the other hand, have tiny cracks from which failure begins.Therefore, estimating the residual life of thin plates made from these materials and used in space and offshore structures requires knowledge of the stress distribution due to cracking in these components. Because of the singularity of the crack tip due to large stresses, the presence of a relatively small crack can lead to a hazardous situation. Therefore, this area should be given more attention.In this research, using the Inglis formula and considering the correction coefficient of the compensatory free surface, the value of the stress coefficient for edge crack is obtained. Then, by replacing the new stress coefficient in Westergaard formula, we calculate the stress field of Mode I (Opening mode) and Mode II (sliding mode) in the perforated plane containing the edge crack. Finally, we examine the effects of various parameters such as loading angle, crack length and hole radius on the values obtained for stress in both modes by plotting. پرونده مقاله -
دسترسی آزاد مقاله
438 - Performance Characteristics, and Behavior Indices of Broiler Chickens in Response to Color and Form of the Feed
M.A. Mesmarian M. ToghyaniThree experiments were conducted to investigate the effect of feed color or feed form on feed preference, growth performance, and behavior indices of broilers. In experiment 1, 60 one-day-old broilers were dis-tributed in 3 vast floor pens whereby broilers of each pen w چکیده کاملThree experiments were conducted to investigate the effect of feed color or feed form on feed preference, growth performance, and behavior indices of broilers. In experiment 1, 60 one-day-old broilers were dis-tributed in 3 vast floor pens whereby broilers of each pen were offered a non-colored feed as well as green, blue, and red colored diets. Broilers preferred to consume higher amounts of green or non-colored feed than those offered with blue and red diets (P<0.05) across the entire rearing period. In experiment 2, 240 one-day-old broilers were assigned to one of 4 treatments, comprising five replicates per treatment in a com-pletely randomized design. Dietary treatments included a control (non-colored diet) and diets with blue, green, or red colors. The most significant duration of tonic immobility was observed in broilers fed red feed, while the lowest duration was observed in birds fed blue diet (P<0.05). Feeding, preening, and aggres-sive behavior were higher in birds fed on green feed than those received a control diet (P<0.05). In experi-ment 3, 360 one- day-old chicks were allotted to 6 experimental treatments of a non-colored mash diet; non-colored pelleted feed; non-colored mash + non-colored pelleted diet; non-colored mash + blue color pel-leted feed; non-colored mash + green color pelleted feed; and non-colored mash + red color pelleted feed. Broilers fed non-colored pelleted feed had the lowest feed conversion ratio (FCR) during the starter, grow-ing, and entire rearing periods (P<0.05). Overall, broilers preferred to consume a colored diet. Feeding pel-leted feed improved the growth performance of broilers regardless of feed color. پرونده مقاله