The evaluation of Khyber limestone in Pakistan for using as road aggregate based on geotechnical properties

محورهای موضوعی : Economic Geology

Naveed Rehman ¹ , Syed Haroon Ali ² , Zahid Ullah ³ , Muhammad Kashif ⁴ , Muhammad Arslan Abid ⁵ , Atif Saleem ⁶ , Amjad Ali ⁷ , Muhammad Yaseen ⁸

1 - Department of Earth Sciences, University of Sargodha, Sargodha, Punjab, Pakistan
2 - Department of Earth Sciences, University of Sargodha, Sargodha, Punjab, Pakistan
3 - Department of Earth Sciences, University of Sargodha, Sargodha, Punjab, Pakistan
4 - Department of Earth Sciences, University of Sargodha, Sargodha, Punjab, Pakistan
5 - Department of Earth Sciences, University of Sargodha, Sargodha, Punjab, Pakistan
6 - Department of Earth Sciences, University of Sargodha, Sargodha, Punjab, Pakistan
7 - School of Earth Sciences, Zhejiang University Hangzhou City, China
8 - Department of Geology, Abdul Wali Khan University Mardan, Khyber Pakhtunkhwa, Pakistan

تاریخ دریافت : 1400/06/17 تاریخ پذیرش : 1400/09/22 تاریخ انتشار : 1400/09/22

کلید واژه: road aggregates, Khyber Formation, Limestone, Schmidt hammer rebound,

چکیده مقاله :

Khyber Formation of Paleozoic age, has been studied here to access its physiochemical and mechanical characteristics. There has been several studies on the sedimentology of the Khyber limestone, however, much more detailed study is required to understand it aggregate potential in desired resolution and precision. It is achieved by understanding the rock types, microscopic textures and physical/ mechanical properties. The Khyber Formation is widely exposed in eastern and central parts of district Khyber, Khyber Pakhtunkhwa (KP) Province, Pakistan. It is a thick bedded hard limestone unit. The carbonates in the Khyber Formation are dominated by calcite, with dolomite, and other accessory minerals as minor component. The mechanical and physical properties of aggregates like specific gravity (2.69), water absorption (0.80%), soundness (2.34%), Los Angeles abrasion value (23.60%), aggregate crushing value (12.18%), aggregate impact value (12.76%) flaky index (10.15%), elongation index (13.02%), California bearing ratio (90.35%), coating and stripping values (96.32%), Schmidt rebound attains (34.23) and compressive strength (38.58Mpa) are according to the available standards. The petrographic analyses of samples of Khyber Formation and energy dispersive X-Rays analysis (EDX) illustrate that it dominantly consists of calcite (88-92%) with small to trace assemblage of dolomite (2-8%), ungraded quartz (1-3%) and ores (1-2%). The chemical and petrographic examinations show that the limestone units of the Khyber Formation are inoffensive in terms of Alkali Silica Reaction (ASR) and Alkali Carbonate Reaction (ACR). These characteristics of the limestone units demonstrating that these deposits are potential aggregate for large-scale projects in the KP Province (Pakistan) and region.

منابع و مأخذ:

1. AASHTO (American Association of State Highway and Transportation Officials) (2009) Specific gravity and absorption of coarse aggregate. AASHTO T85-D11.


2. AASHTO (American Association of State Highway and Transportation Officials) (2009) Soundness test. AASHTO T-104.


3. AASHTO (American Association of State Highway and Transportation Officials) (2009) Coating and stripping of bitumen-aggregate mixture. AASHTO-T-182.


4. AASHTO (American Association of State Highway and Transportation Officials) (2009) California bearing ratio. AASHTO-T-193.


5. AASHTO (American Association of State Highway and Transportation Officials) (2009) Los Angeles abrasion test. AASHTO T-96.


6. Abbas S, Munir MJ, Kazmi SM, Khitab A, Ashiq SZ, Arshad MT (2017) Engineering characteristics of widely used coarse aggregates in Pakistan: a comparative study. Pakistan Journal of Engineering and Applied Sciences 20:85-93.


7. Abioui M, Ali SH, Kostyuchenko Y, Benssaou M (2020) Petar Milanović, Nikolay Maksimovich, and Olga Meshcheriakova: dams and reservoirs in evaporites. Carbonates and Evaporites 35(4):1-2.


8. Afroughsabet V, Biolzi L, Ozbakkaloglu T (2017) Influence of double hooked-end steel fibers and slag on mechanical and durability properties of high performance recycled aggregate concrete. Composite Structures 181:273-84.


9. Ahmad F, Quasim MA, Ahmad AH (2021) Microfacies and diagenetic overprints in the limestones of Middle Jurassic Fort Member (Jaisalmer Formation), Western Rajasthan, India: Implications for the depositional environment, cyclicity, and reservoir quality. Geological Journal 56(1):130-51.


10. Ahsan N, Chaudhry MN, Gondal MM, Khan ZK (2009) Allai aggregate for rehibilitation and reconstruction of October 8, 2005 earthquake affected allai-banan area, NWFP, Pakistan. Geol. Bull. Punjab Univ: 44.


11. Ali A, Khan N, Ahmad S, Ahmad R (2019) Pressure solution–dissolution imparted strike–slip movement: a case study from the Khyber Limestone, Pakistan. Arabian Journal of Geosciences 12(10):1-0.


12. Ali SH, Abdullatif OM, Abioui M, Bashir Y, Wahid A, Yasin Q (2021) Dolomitization and paleoenvironment of deposition of the Lower and Middle Rus Formation (Early Eocene, Dammam Dome, Eastern Saudi Arabia). Journal of Sedimentary Environments 6(2):267-85.


13. Anjum MN, Ali N, Rehman ZU, Ghayas M, Ahmad W (2018) Rock Aggregate Potential of the Limestone Units in the Khyber Formation, Khyber Ranges, Pakistan. International Journal of Economic and Environmental Geology 9(4).


14. Anjum MN, Ali N, Rehman ZU, Ghayas M, Ahmad W (2018) Rock Aggregate Potential of Limestone Units in the Khyber Formation, Pakistan. International Journal of Economic and Environmental Geology 30 9(4):26-33.


15. Anjum MN, Ashfaq M, Ullah S, Yaseen M, Ali L, Prsek J, Rehman G (2021) Economic geology of the carbonate rocks from Mesozoic Alpurai group, Peshawar basin, Pakistan. Iranian Journal of Earth Sciences 13(4).


16. ASTM (American Society for Testing and Materials) (1990) Standard Guide for Petrographic Examination of Aggregates for Concrete, C 295.


17. ASTM (American Society for Testing and Materials) C-131 (2003) Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angles Machine, American Society for Testing and Materials, Philadelphia, Pa. USA, 1-3.


18. ASTM (American Society for Testing and Materials) D-2938 (2000) Standard Test Method for Unconfined Compressive Strength of Intact Rock Core Specimens, American Society for Testing and Materials, Philadelphia, Pa. USA, 1-3.


19. Baby S (2021) Coastal Environmental Challenges in Kuwait. InThe Arabian Seas: Biodiversity, Environmental Challenges and Conservation Measures:1143-1166. Springer, Cham.


20. Bilal M, Khan A (2019) Geotechnical Evaluation of Limestones from Cape Monze and Adjoining Areas, Karachi, Pakistan for Their Utilization as Road Aggregate. International Journal of Economic and Environmental Geology 10(2):1-8.


21. Broekmans MA (2018) Deleterious Reactions of Aggregate with Alkalis in Concrete. Applied Mineralogy of Cement & Concrete: 279-366.


22. BS (British Standards) (1990) Methods for determination of particle shape. Flakiness index and Methods for determination of particle shape. Elongation index of coarse aggregate, BS 812 Part 105.


23. Chen P, Feng B, Lin Y, Lin C (2019) Solidification and stabilization of sewage sludge and MSWI bottom ash for beneficial use as construction materials. Journal of Materials in Civil Engineering 31(1):04018351.


24. Deere DU, Miller RP (1966) Engineering classification and index properties for intact rock. Illinois Univ At Urbana Dept Of Civil Engineering.


25. Fares AI, Sohel KM, Al-Jabri K, Al-Mamun A (2021) Characteristics of ferrochrome slag aggregate and its uses as a green material in concrete–A review. Construction and Building Materials 294:123552.


26. Fladvad M, Aurstad J, Wigum BJ (2017) Comparison of practice for aggregate use in road construction—results from an international survey. Bearing capacity of roads, railways and airfields 28:563-70.


27. Gondal MM, Ahsan NA, Javaid AZ (2009) Engineering properties of potential aggregate resources from eastern and central Salt Range, Pakistan. Geological Bulletin of Punjab University 44:97-103.


28. Griesbach CL (1892) The geology of the Safed Koh. Records of the Geological Survey of India. 25(Pt 2).


29. Gudissa L, Raghuvanshi TK, Meten M, Chemeda YC, Schmerold R (2021) Suitability Assessment of Mesozoic Limestone Aggregates as Pavement Material in Harar-Dire Dawa Area, Eastern Ethiopia. Research Square.


30. Gudissa L, Raghuvanshi TK, Meten M, Chemeda YC, Schmerold R (2021). The Suitability of Mesozoic Limestone Aggregate for Possible use as Pavement Material in Harer-Dire Dawa Area. Research Square.


31. Guo Y, Markine V, Song J, Jing G (2018) Ballast degradation: Effect of particle size and shape using Los Angeles Abrasion test and image analysis. Construction and Building Materials 169:414-24.


32. Hamedi GH (2018) Effects of polymeric coating the aggregate surface on reducing moisture sensitivity of asphalt mixtures. International Journal of Civil Engineering 16(9):1097-107.


33. Harrison DJ, Inglethorpe SD, Mitchell CJ, Kemp SJ, Chaodumrong P, Charusibandhu M (1988) Procedures for the rapid assessment of limestone resources.


34. Hartley A (1974) A review of the geological factors influencing the mechanical properties of road surface aggregates. Quarterly Journal of Engineering Geology 7(1): 69-100.


35. Hayden HH (1898) On the geology of Tirah and the Bazar Valley. Mem Geol Sur India 28: 96–117.


36. Hillel D (2003) Introduction to environmental soil physics. Elsevier.


37. Hudson B (1999) Modification to the fine aggregate angularity test. In Proceedings, seventh annual international center for aggregates research symposium, Austin, TX.


38. Iqbal MA, Salim AM, Siddiqui NA, Baioumy H, Ali SH (2017) Petrographic investigations and reservoir potential of shallow marine sandstone: a case study from Nyalau formation, Sarawak Basin, Malaysia. Journal of Engineering and Applied Sciences 12(22):6255-64.


39. Jamieson IL, Moulthrop JS, Jones DR (1995) SHRP results on binder-aggregate adhesion and resistance to stripping. The Asphalt Yearbook 1995.


40. Javed A, Wahid A, Mughal MS, Khan MS, Qammar RS, Ali SH, Siddiqui NA, Iqbal MA (2021) Geological and petrographic investigations of the Miocene Molasse deposits in Sub-Himalayas, District Sudhnati, Pakistan. Arabian Journal of Geosciences 14(15):1-24.


41. Kadhim A, Sadique M, Al-Mufti R, Hashim K (2021) Developing one-part alkali-activated metakaolin/natural pozzolan binders using lime waste. Advances in Cement Research 33(8):342-56.


42. Kandhal PS, Parker F (1998) Aggregate tests related to asphalt concrete performance in pavements. Transportation Research Board.


43. Khan AB, Shah ZH, Naeem SM (1970) Geology of the Ghundai Sar and vicinity, Jamrud, Khyber Agency. Geol. Bull. Univ. Peshawar 6; 5:115.


44. Liu B, Yang Y, Li J, Chi Y, Li J, Fu X (2020) Stress sensitivity of tight reservoirs and its effect on oil saturation: A case study of Lower Cretaceous tight clastic reservoirs in the Hailar Basin, Northeast China. Journal of Petroleum Science and Engineering 184:106484.


45. Lu G, Renken L, Li T, Wang D, Li H, Oeser M (2019) Experimental study on the polyurethane-bound pervious mixtures in the application of permeable pavements. Construction and Building Materials 202:838-50.


46. Malkani MS, Mahmood Z, Somro N, Alyani MI (2017) Cement Resources, Agrominerals, Marble, Construction, Dimension and Decor Stone Resources of Pakistan. Geological Survey of Pakistan.


47. Narzary BK, Ahamad KU (2018) Estimating elastic modulus of California bearing ratio test sample using finite element model. Construction and Building Materials 175:601-9.


48. Neumann JE, Chinowsky P, Helman J, Black M, Fant C, Strzepek K, Martinich J (2021) Climate effects on US infrastructure: the economics of adaptation for rail, roads, and coastal development. Climatic change 167(3):1-23.


49. Neville AM (1981) Properties of concrete 3rd edition. Pitman, London.


50. Neville AM (1996) Properties of concrete. 4-th edition. London: Person Education press.


51. NHA (National Highway Authority) (1998) General specifications, Ministry of Communications, Govt. of Pakistan.


52. NRMCA (National Ready Mixed Concrete Association) (1993) Guide Specifications for Concrete Subject to Alkali-Silica Reactions, Mid-Atlantic Regional Technical Committee, (Available through NRMCA, Silver Spring, Maryland).


53. Ozol MA (2006) Alkali-carbonate rock reaction. In Significance of tests and properties of concrete and concrete-making materials. ASTM International.


54. Rankey EC, Schlaich M, Mokhtar S, Ghon G, Ali SH, Poppelreiter M (2019) Seismic architecture of a Miocene isolated carbonate platform and associated off-platform strata (Central Luconia Province, offshore Malaysia). Marine and Petroleum Geology 102: 477-95.


55. Saberian M, Li J (2021) Effect of freeze–thaw cycles on the resilient moduli and unconfined compressive strength of rubberized recycled concrete aggregate as pavement base/subbase. Transportation Geotechnics 27:100477.


56. Salih SM, PSravana DR (2013) Effect of Flakiness Index on Bituminous Mixes. International Journal of Scientific Engineering and Technology Research, 2(10): 1023-1030.


57. Sanchez RC (2020) Balanced alkali limit in cement for alkali-silica reaction risk-free concrete production (Doctoral dissertation).


58. Saw BB, Schlaich M, Pöppelreiter MC, Ramkumar M, Lunt P, Vintaned JA, Ali SH (2019) Facies, depositional environments, and anatomy of the Subis build-up in Sarawak, Malaysia: implications on other Miocene isolated carbonate build-ups. Facies 65(3):1-4.


59. Shah MM, Afridi S, Khan EU, Rahim HU, Mustafa MR (2021) Diagenetic Modifications and Reservoir Heterogeneity Associated with Magmatic Intrusions in the Devonian Khyber Limestone, Peshawar Basin, NW Pakistan. Geofluids.


60. Shah SMI (1977) Precambrian and Paleozoic of Pakistan. In Shah, S.M.I, (ed.) Stratigraphy of Pakistan. Geol. Surv. Pakistan, Mem. 12: 1-5.


61. Shah SMI (2009) Stratigraphy of Pakistan. Geol. Surv. Pakistan, Mem., 22, 381.


62. Shah SMI, Siddiqi RA, Talent JA (1980) Geology of the Eastern Khyber Agency, North Western Frontier Province, Pakistan. Geological Survey of Pakistan, Rec 44:90.


63. Sims I, Poole AB, editors (2017) Alkali-Aggregate Reaction in Concrete: A World Review. CRC Press.


64. Smith MR, Collis L (1993) Aggregates. Sand, gravel and crushed rock aggregates for construction purposes. Engineering geology special publication (9): XX-339.


65. Tam VW, Soomro M, Evangelista AC (2018) A review of recycled aggregate in concrete applications (2000–2017). Construction and Building Materials 172:272-92.


66. Ullah R, Ullah S, Rehman N, Ali F, Asim M, Tahir M, Ullah S, Muhammad S (2020) Aggregate Suitability of the Late Permian Wargal Limestone at Kafar Kot Chashma Area, Khisor Range, Pakistan. International Journal of Economic and Environmental Geology 11(1):89-94.


67. Yao Y, Li J, Liang C, Hu X (2021) Effect of Coarse Recycled Aggregate on Failure Strength for Asphalt Mixture Using Experimental and DEM Method. Coatings 11(10):1234.


68. Yaragal SC, Kumar BC, Jitin C (2020) Durability studies on ferrochrome slag as coarse aggregate in sustainable alkali activated slag/fly ash based concretes. Sustainable Materials and Technologies 23:e00137.