Dynamic Fracture Analysis Using an Uncoupled Arbitrary Lagrangian Eulerian Finite Element Formulation
محورهای موضوعی : Engineering
1 - Department of Applied Mechanics, Faculty of Mechanical Engineering, K.N. Toosi University of Technology
2 - Department of Applied Mechanics, Faculty of Mechanical Engineering, K.N. Toosi University of Technology
کلید واژه: Three dimensional ALE finite element formulation, Mesh motion, Dynamic fracture, Crack velocity, Implicit dynamic analysis,
چکیده مقاله :
This paper deals with the implementation of an efficient Arbitrary Lagrangian Eulerian (ALE) formulation for the three dimensional finite element modeling of mode I self-similar dynamic fracture process. Contrary to the remeshing technique, the presented algorithm can continuously advance the crack with the one mesh topology. The uncoupled approach is employed to treat the equations. So, each time step is split into two phases: an updated Lagrangian phase followed by an Eulerian phase. The implicit time integration method is applied for solving the transient problem in Lagrangian phase with no convective effects. A mesh motion scheme, in which the related equations need not to be solved at every time step, is proposed in Eulerian phase. The critical dynamic stress intensity factor criterion is used to determine the crack velocity. The variation of dynamic stress intensity factor along the crack front is also studied based on the interaction integral method. The proposed algorithm is applied to investigate the dynamic crack propagation in the DCB specimen subjected to fixed displacement. The predicted results are compared with the experimental study cited in the literature and a good agreement is shown. The proposed algorithm leads to the accurate and efficient analysis of dynamic crack propagation process.
[1] Shahani A.R., Amini M.R., 2010, Analytical modeling of dynamic fracture and crack arrest in DCB specimens under fixed displacement conditions, Fatigue and Fracture of Engineering Materials and Structures 33(7): 436-451.
[2] Yagawa G., Sakai Y., Ando Y., 1977, Analysis of a rapidly propagating crack using finite elements, in: Fast Fracture and Crack Arrest, edited by G.T. Hann, M.F. Kanninen, ASTM special technical publication 627: 109-122.
[3] Keegstra P.N.R., Head J.L., Turner C.E., 1978, A two dimensional dynamic linear elastic finite element program for the analysis of unstable crack propagation and arrest, in: Numerical Methods in Fracture Mechanics, Proceedings of the 1st International Conference, Swansea, Wales, United Kingdom, 634-647.
[4] Caldis E.S., Owen D.R.J., Zienkiewicz O.C., 1979, Nonlinear dynamic transient methods in crack propagation studies, in: Nonlinear and Dynamic Fracture Mechanics, edited by N. Perrone, S.N. Atluri, ASME Applied Mechanics Division, New York, 35: 1–17.
[5] Kanninen M.F., 1978, A critical appraisal of solution techniques in dynamic fracture mechanics, in: Numerical Methods in Fracture Mechanics, edited by A.R. Luxmore, D.R.J. Owen, Pineridge Press, Swansea, United Kingdom, 612-633.
[6] Swenson D.V., Ingraffea A.R., 1988, Modeling mixed-mode dynamic crack propagation using finite elements, Theory and Applications, Computational Mechanics 3(6): 381-397.
[7] Wawrzynek P.A., Ingraffea A.R., 1989, An interactive approach to local remeshing around a propagating crack, Finite Elements in Analysis and Design 5(1): 87-96.
[8] Shahani A.R., Seyyedian M., 2004, Simulation of glass cutting with an impinging hot air jet, International Journal of Solids and Structures 41: 1313-1329.
[9] Rethore J., Gravouil A., Combescure A., 2004, A stable numerical scheme for the finite element simulation of dynamic crack propagation with remeshing, Computer Methods in Applied Mechanics and Engineering 193(44): 4493-4510.
[10] Shahani A.R., Amini M.R., 2009, Finite element analysis of dynamic crack propagation using remeshing technique, Journal of Materials and Design 30(4): 1032-1041.
[11] Nishioka T., Tokudome H., Kinoshita M., 2001, Dynamic fracture-path prediction in impact fracture phenomena using moving finite element based on Delaunay automatic mesh generation, International Journal of Solids and Structures 38(30-31): 5273-5301.
[12] Hughes T.J.R., Liu W.K., Zimmermann T.K., 1981, Lagrangian Eulerian finite element formulation for incompressible viscous flows, Computer Methods in Applied Mechanics and Engineering 29(3): 329-349.
[13] Kennedy J.M., Belytschko T., 1981, Theory and application of a finite element method for arbitrary Lagrangian-Eulerian fluids and structures, Nuclear Engineering and Design 68(2): 129-146.
[14] Liu W.K., Belytschko T., Chang H., 1986, An arbitrary Lagrangian Eulerian finite element method for path dependent materials, Computer Methods in Applied Mechanics and Engineering 58(2): 227-245.
[15] Liu W.K., Chang H., Chen J.S., Belytschko T., Zhang Y.F., 1988, Arbitrary Lagrangian–Eulerian Petrov-Galerkin finite elements for nonlinear continua, Computer Methods in Applied Mechanics and Engineering 68(3): 259-310.
[16] Huerta A., Casadei F., 1994, New ALE application in non-linear fast-transient solid dynamics, Engineering Computations 11(4): 317-345.
[17] Wang J., Gadala M.S., 1997, Formulation and survey of ALE method in nonlinear solid mechanics, Finite Elements in Analysis and Design 24(4): 253-269.
[18] Gadala M.S., Wang J., 1998, ALE formulation and its application in solid mechanics, Computer Methods in Applied Mechanics and Engineering 167(1-2): 33-55.
[19] Gadala M.S., Wang J., 1999, Simulation of metal forming processes with finite element method, International Journal of Numerical Methods in Engineering 44(10): 1397-1428.
[20] Rodriguez-Ferran A.R., Casadei F., Huerta A., 1998, ALE stress update for transient and quasi-static processes, International Journal of Numerical Methods in Engineering 43: 241-262.
[21] Aymone J.L.F., Bittencourt E., Creus G.J., 2001, Simulation of 3D metal forming using an arbitrary Lagrangian Eulerian finite element method, Journal of Materials Processing Technology 110(2): 218-232.
[22] Rodriguez-Ferran A.R., Perez-Foguet A., Huerta A., 2002, Arbitrary Lagrangian–Eulerian (ALE) formulation for hyperelastoplasticity, International Journal of Numerical Methods in Engineering 53(8): 1831-1851.
[23] Bayoumi H.N., Gadala M.S., 2004, A complete finite element treatment for the fully coupled implicit ALE formulation, Computational Mechanics 33(6): 435-452.
[24] Khoei A.R., Anahid M., Shahim K., DorMohammadi H., 2008, Arbitrary Lagrangian–Eulerian method in plasticity of pressure-sensitive material: application to powder forming processes, Computational Mechanics 42(1): 13-38.
[25] Movahhedy M.R., 2000, ALE Simulation of chip formation in orthogonal metal cutting process, PhD dissertation, The University of British Columbia, Canada.
[26] Gadala M.S., Movahhedy M.R., Wang J., 2002, On the mesh motion for ALE modeling of metal forming processes, Finite Elements in Analysis and Design 38(1): 435-459.
[27] Ponthot J.P., Belytschko T., 1998 , Arbitrary Lagrangian–Eulerian formulation for element-free Galerkin method, Computer Methods in Applied Mechanics and Engineering 152(1-2): 19-46.
[28] Gadala M.S., 2004, Recent trends in ALE formulation and its applications in solid mechanics, Computer Methods in Applied Mechanics and Engineering 193: 4247-4275.
[29] ANSYS Inc., 2009, ANSYS Release 12.1 User's Manual, Mechanical APDL, Swanson Analysis System.
[30] Belytschko T., Liu W.K., Moran B., 2000, Nonlinear Finite Elements for Continua and Structures, John Wiley & Sons, New York.
[31] Benson D.J., 1989, An efficient, accurate and simple ALE method for nonlinear finite element programs, Computer Methods in Applied Mechanics and Engineering 72(3): 305-350.
[32] Ponthot J.P., Hogge M., 1991, The use of the Eulerian Lagrangian FEM in metal forming applications including contact and adaptive mesh, in: Advances in Finite Deformation Problems in Materials Processing and Structures, ASME Applied Mechanics Division, Atlanta, 125: 44-64.
[33] Boman R., Ponthot J.P., 2004, Finite element simulation of lubricated contact in rolling using the arbitrary Lagrangian–Eulerian formulation, Computer Methods in Applied Mechanics and Engineering 193: 4323-4353.
[34] Martinet F., Chabrand P., 2000, Application of ALE finite element method to a lubricated friction model in sheet metal forming, International Journal of Solids and Structures 37(29): 4005-4031.
[35] Aymone J.L.F., 2004, Mesh motion techniques for the ALE formulation in 3D large deformation problems, International Journal of Numerical Methods in Engineering 59(14): 1879-1908.
[36] Miranda I., Ferencz R.M., Hughes T.J.R., 1989, An improved implicit-explicit time integration method for structural dynamics, Earthquake Engineering and Structural Dynamics 18: 643-655.
[37] Zienkiewicz O.C., Taylor R.L., 2000, The Finite Element Method, vol. 2: Solid Mechanics, McGraw Hill, UK., Fifth Edition.
[38] Freund L.B., 1998, Dynamic Fracture Mechanics, Cambridge University Press, Berlin.
[39] Rose L.R.F., 1975, Recent theoretical and experimental results on fast brittle fracture, International Journal of Fracture 12(6): 799-813.
[40] Rosakis A.J., Duffy J., Freund L.B., 1984, The determination of dynamic fracture toughness of AISI 4340 steel by the shadow spot method, Journal of the Mechanics and Physics of Solids 3(4): 443-460.
[41] Zehnder A.T., Rosakis A.J., 1990, Dynamic fracture initiation and propagation in 4340-steel under impact loading, International Journal of Fracture 43: 271-285.
[42] Kalthoff J.F., Beinert J., Winkler S., 1977, Measurement of dynamic stress intensity factors for fast running and arresting cracks in double cantilever beam specimens, in: Fast Fracture and Crack Arrest, edited by G.T. Hahn, M.F. Kanninen, ASTM special technical publication, 161-176.
[43] Kanninen M.F., Popelar C.H., 1985, Advanced Fracture Mechanics, Oxford University Press, New York.
[44] Yau J., Wang S., Corten H., 1980, A mixed-mode crack analysis of isotropic solids using conservation laws of elasticity, Journal of Applied Mechanics 47: 335-341.
[45] Nikishkov G.P., Atluri S.N., 1987, Calculation of fracture mechanics parameters for an arbitrary three-dimensional crack, by the ‘equivalent domain integral’ method, International Journal for Numerical Methods in Engineering 24(9): 1801-1821.
[46] Shih C., Asaro R., 1988, Elastic-plastic analysis of cracks on bimaterial interfaces: part I-small scale yielding, Journal of Applied Mechanics 55: 299-316.
[47] Zienkiewicz O.C., Philips D.V., 1971, An automatic mesh generation scheme for plane and curved surfaces by isoparametric coordinates, International Journal of Numerical Methods in Engineering 3(4): 519-528.
[48] Ravi-Chandar K., Knauss W.G., 1984, An experimental investigation into dynamic fracture. II. Micro structural aspects, International Journal of Fracture 26: 65-80.
[49] Agrawal, A.K., 2002, Free surface effect on moving crack under impact loading by BEM, Engineering Analysis with Boundary Elements 26: 253-264.
