Numerical Simulation of Fluid-Structure Interaction and its Application in Impact of Low-Velocity Projectiles with Water Surface
محورهای موضوعی : Mechanical EngineeringN. Khazraiyan 1 , N. Dashtian Gerami 2 , M. Damircheli 3
1 - Department of Mechanical Engineering,
Islamic Azad University, Islamshahr Branch, Tehran, Iran
2 - Department of Mechanical Engineering,
University of Tarbiat Modares, Tehran, Iran
3 - Department of Mechanical Engineering,
Islamic Azad University, Shahr-e-Qods Branch, Tehran, Iran
کلید واژه: Fluid-Structure Interaction, Finite Element Method, ALE Formulation,
چکیده مقاله :
In this article, finite element method and ALE formulation were used to numerically simulate impact of low-velocity specific projectiles with water surface. For the simulation, Ls-Dyna finite element code was used. Material models which were used to express behavior of air and water included Null material model. For the projectile, plastic-kinematics material model was applied. Mie-Gruneisen equation of state was also attributed to air and water. First, the results were validated by analyzing the impact of metallic cylinder with water surface and then impact of a mine as a low-velocity projectile was simulated. Among major outputs were force and pressure applied to the projectile, velocity and acceleration variations upon entering water, stress-strain variations and variations of water surface in various steps of analysis. The results showed that impact of structure with fluid can be modeled using finite element model with high accuracy in terms of quality and quantity.
[1] Anghileri, M., Spizzica, A., “Experimental validation of finite element models for water impacts”, Proceedings of the second international crash users seminar, Cranfield, UK, June. 1995.
[2] Korobkin, A. A., Ohkusu, M., “Impact of two circular plates one of which is floating on a thin layer of liquid”, Journal of Engineering Mathematics, Vol. 50, 2004, pp. 343–358.
[3] Battistin, D., Iafrati, A., “Hydrodynamic loads during water entry of two-dimensional and axisymmetric bodies”, Journal of Fluids and Structures, Vol. 17, 2003, pp. 643–664.
[4] Park, M., Jung, Y., Park, W., “Numerical study of the impact force and ricochet behaviour of high speed water entry bodies”, Comput Fluids, Vol. 51, 2003, pp. 932-939.
[5] Roe, S. M., “Numerical and experimental analysis of initial water impact of an air dropped REMUS AUV”, A thesis submitted for the degree of Master of Science, MIT, 2005.
[6] Kleefsman, T., “Water Impact Loading on Offshore Structures”, A Numerical Study, EU Project No.: GRD1-2000-25656, 2005.
[7] Fairlie-Clarke, A. C., Tveitnes, T., “Momentum and gravity effects during the constant velocity water entry of wedge-shaped sections”, Ocean Engineering, Vol. 37, No. 5, 2008, pp. 706-716.
[8] Wu, G., “Numerical simulation for water entry of a wedge at varying speed by a high order boundary element method”, Journal of Marine Science and Application, Vol. 11, 2012, pp. 143-149.
[9] LS-DYNA Theory Manual, Ver 7, Livermore Software Thechnology Corp, 2007.
[10] Olovsson, L., Souli, M., and Ian, D., “Fluid-Structure Interaction Modeling,” Livermore Software Technology Corporation. January 07, 2003.
[11] Halliquist, J. O., “Simplified Arbitrary Lagrangian-Eulerian”, LS-DYNA Theoretical Manual, May 1998.
[12] Seif, M., Mousaviraad, S., and Saddathosseini, S., “Numerical Modeling of 2-d Water Impact in One Degree of Freedom”, Sintesis Tecnologica, Vol. 2, 2005, pp. 79-83.
[13] Campbell, I. M., Weynberg, P. A., “Measurement of parameters affecting slamming”, Report No 440, Wolfson Unit of Marine Technology, Tech. Rep. Centre No. OT-R-8042, Southampton, UK, 1980.
[14] Greenhow, M., Lin, W, M., “Non linear free surface effects: experiments and theory”, Report No. 83-19, Department of Ocean Engineering, MIT, Cambridge, MA, 1983.
