List of Articles Finite Element

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Optical imaging and magnetic field simulation of a DC circular planar magnetron sputtering discharge
  Ahmad Rastkar Ali Reza Niknam Mostafa Salahshoor
  10.57647/J.JTAP.2023.1704.38
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Finite element formulation for the free vibration analysis of embedded double-walled carbon nanotubes based on nonlocal Timoshenko beam theory
  Milad Hemmatnezhad Reza Ansari
  10.1186/2251-7235-7-6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Study of photocatalytic decomposition of reactive colorants from textile wastewaters: finite elements numerical modeling and experimental results
  Khashayar Badii Faramarz Doulati Ardejani Seyed Zia-e-din Shafaei Tonekaboni Niaz Mohammad Mahmoodi Farrokh Legha Amini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Analysis of the Free Edge Effect of a Composite Laminate under Axial Tensile Load According to the Environmental Properties of the Composite Materials
  S Ebadi E Anbarzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Simulation of Ultrasonic Welding of Al-Cu Dissimilar Metals for Battery Joining
  Reza Abdi Behnagh Peyman Esmaeilzadeh Mohsen Agha Mohammad Pour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Evaluating the Effect of Operating Conditions on Temperature Variation Rate of Inner Walls and Inside Inflated Air of Pneumatic Tires
  Moslem Namjoo Hossein Golbakhshi Farhad Khoshnam Ahmad Soleimani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Modelling of Non-Uniform Piezoelectric Micro-Cantilever in Different Environments
  Mitra Taghizade A. H. Korayem M. H. Korayem
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Stress and Displacement Analysis of First Molar Hollow Tooth during Dental Filling Operation using Three-Dimensional Finite Element Method
  M. R. Karamooz-Ravari B. Shahriari E. Seyfali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Optimization of the Forging Process of a Gas Turbine Blade using the Finite Element Analysis and Response Surface Method
  V. Alimirzaloo F. R. Biglari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Numerical Simulation of Fluid-Structure Interaction and its Application in Impact of Low-Velocity Projectiles with Water Surface
  N. Khazraiyan N. Dashtian Gerami M. Damircheli
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Experimental and Numerical Analysis of Titanium/HA FGM for Dental Implantation
  Sina Sazesh Aazam Ghassemi Reza Ebrahimi Mohammad Khodaei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Behavior Analysis of Cold Expanded-Bolt Clamped AL2024-T3 Plate
  M. Sayah Badkhor A. R. Naddaf Oskouei* H. Mohammadi Hooyeh F. Shirbakht
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Process Parameters Optimization in Gas Blow Forming of Pin-type Metal Bipolar Plates using Taguchi and Finite Element Methods
  M. Moradian A. Doniavi V. Modanloo V. Alimirzaloo
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Multi layered finite element analysis of graded coatings in frictional rolling contact
  R. Jahedi S. Adibnazari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - A study on the numerical simulation of thermo-mechanical behavior of the novel functionally graded thermal barrier coating under thermal shock
  N. Nayebpashaee H. Vafaeenezhad S. M. M. Hadavi S. H. Seyedein M. R. Aboutalebi H. Sarpoolaky
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Developing a control strategy for AFM nano- micro manipulation
  H. RaeisiFard A. K. Hoshiar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Characterization of Stress Concentration in Thin Cylindrical Shells with Rectangular Cutout Under Axial Pressure
  O. Sam Daliri M. Farahani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Investigation on Stress Distribution of Functionally Graded Nanocomposite Cylinders Reinforced by Carbon Nanotubes in Thermal Environment
  Mohammad morad Sheikhi Hamidreza Shamsolhoseinian Rasool Moradi dastjerdi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Numerical Analysis of Circular Pre-notched U-Channel Section Distortions in Cold Roll-Forming Process
  S. Sattar S. Mazdak E. Sharifi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Experimental and Numerical Investigation of the Arms Displacement in a New Electrothermal MEMS Actuator
  M. Kolahdoozan A. Rouhani Esfahani M. Hassani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Experimental Study and Finite Element Simulation of Residual Stress in Welded Sections of Steel P91 Pipes with Multi-pass Welding
  Davood Azadi Nosratollah Solhjoei SayedAli Mousavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Application of Topology Optimization in Design of Stem Profile in Hip Implants Using Finite Element Method
  Mohammad Reza Niroomand Farzad Boroomand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Steady State Creep Characteristics of a Ferritic Steel at Elevated Temperature: An Experimental and Numerical Study
  Roozbeh Alipour Ali Farokhi Nejad Hamid Nilsaz Dezfouli
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Multi-Objective Optimization of Loading Paths for Double-Layered Tube Hydroforming using Finite Element Analysis
  Hamed Ebrahimi Keshmarzi Ramin Hashemi Reza Madoliat
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Numerical simulation of multilayer cellular scaffolds with 3D and 1D elements
  Hamid Reza khanaki Sadegh Rahmati Mohammad Nikkhoo Mohammad Haghpanahi Javad Akbari
  10.30495/admt.2020.1905314.1207
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - Numerical Simulation of Ultrasonic Assisted Indentation Tube Forming
  Saeid Dashti Masih Paknejad Amir Abdullah Abbas Pak
  10.30495/admt.2020.1869462.1124
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - The Numerical Modeling to Study the Multi-Pass Friction Stir Processing on Magnesium Casting Alloy AZ91
  hoda agha amini fashami Mohammad Hoseinpour Gollo Nasrollah Bani Mostafa Arab Bahram Nami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Micro-Finite Element Model to Investigate the Mechanical Stimuli in Scaffolds Fabricated via Space Holder Technique for Cancellous Bone
  Sayed Alireza Hashemi Saeid Esmaeili Mazyar Ghadirinejad Saeed Saber-Samandari Erfan Sheikhbahaei Alireza Kordjamshidi Amirsalar Khandan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Influences of Blank Holder Force in The Multi-Step Deep Drawing Process of Aluminum Sheets
  Sajad Bakhtiari Seyed Jalal Hashemi Amir Hossein Roohi
  10.30495/admt.2020.1880364.1147
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Investigation on Failure Loads and Failure Modes for Two Parallel Pin-Loaded Holes Made from Unidirectional Glass-Epoxy Nanoclay Laminates
  sajjad dehghanpour keivan hosseini safari Farzan Barati Mohammadmahdi Attar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - Dynamic Analysis of Carbon Nanotube-Reinforced Multilayer Composite Plates
  Jamshid Ebrahimi Jafar Eskandari Jam Reza Azarafza Mohsen Heydari Beni Majid Eskandari Shahraki
  10.30495/admt.2021.1905074.1206
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - Analytical and Numerical Study of Pre-Stress Effect in Piezoelectric Sandwich Type Ultrasonic Transducer
  Hamidreza Nadri Mahdi Shaban Abbas Pak
  10.30495/admt.2021.1904847.1204
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Weld Distortion and Residual Stresses in Aluminum Hollow Section T-Joint
  Asghar Mahdian Arash Babamiri Behrooz Shahriari
  10.30486/admt.2022.1934601.1296
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - Numerical and Experimental Static Bending Analysis of Composite Sandwich Panels with Grid-Stiffened Cores Before and After Transverse Impact Loading
  Ali Asghar Davoodabadi Ali Davar Mohsen Heydari Beni Jafar Eskandari Jam
  10.30486/admt.2021.1904974.1208
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Investigation of In-Situ Compressive Strength of Fiber-Reinforced Mortar and the Effect of Fibers on the Adhesion of Mortar/Steel
  Ali Saberi Varzaneh Mahmood Naderi
  10.30495/admt.2021.1909271.1218
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - The Effect of Boundary Conditions and Concentrated Mass on The Performance and Vibration Results of Piezoelectric Bimorph Beam by Parallel and Series Layers
  majid jabbari Sofia  Jabbari
  10.30486/ADMT.2024.873703
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - Simulation and Dynamic-Thermal Analysis of Ceramic Disc and Brake Pad for Optimization by Finite Element Method
  Navvab Gholami Ahmad Afsari Seyed Mohammad Reza Nazemosadat Mohammad Javad Afsari
  10.30486/ADMT.2024.1980467.1402
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Different Geometry Design Structures of Tissue Scaffolds for Additive Manufacturing
  amirhossein Ehsani sadegh rahmati Mohammad Nikkhoo Shahram Etemadi Haghighi Mohammad Haghpanahi
  10.30495/admt.2021.1936526.1298
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - Numerical Simulation of Hot Forging Process of KIA Car Brake’s Output Shaft
  saeid Hashemian Peyman Mashhadi Keshtiban Abuzar Es'haghi Oskui
  10.30486/admt.2022.1933346.1290
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Evaluation of Critical Buckling Load in FG Plate using Analytical and Finite Elements Methods
  Hossein Ahmadi Rashid AMIR GHIASVAND Maziar Mahdipour Jalilian Mahdi Kazemi
  10.30486/admt.2022.1904716.1203
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - Numerical and Experimental Investigation of Natural Frequency and Damping Coefficient of Flexible Cellular Lattice Structures
  Amir Hosein Samimi M. R. Karamooz-Ravari Reza Dehghani
  10.30486/ADMT.1403.873757
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - Finite Element Analysis of the Impact Behavior of Sandwich Panels with Nanocomposite Face sheet (Epoxy/ Fiberglass/Nanosilica)
  Arash Azadi Mahdi Karami Khorramabadi Maziar Mahdipour Jalilian
  10.30486/admt.2023.1957517.1349
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - The Investigating and Simulating the Corona Phenomenon in The Power Transmission Lines of Power Networks Using the Finite Element Method
  noushin dadashzadeh Elnaz poorreza Vahide Mohadesi
  10.30486/mjtd.2023.1981758.1030
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - Determination of thermal distribution in compact substations
  meisam baharvand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - Numerical and Experimental Investigation on the Effect of Geometric Discontinuity on Frequency Response of Composite Lattice Conical Structures
  M. R Zamani M Zaretabar
  10.22034/jsm.2021.1927323.1689
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Investigating the Effect of Joint Geometry of the Gas Tungsten Arc Welding Process on the Residual Stress and Distortion using the Finite Element Method
  A Shiri A Heidari
  10.22034/jsm.2019.668764
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - Stress Concentration Factor of Single-Layered Graphene Sheets Containing Elliptical Vacancies
  S.K Jalali M.J Beigrezaee
  10.22034/jsm.2019.667250
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - Studying the Mechanical and Thermal Properties of Polymer Nanocomposites Reinforced with Montmorillonite Nanoparticles Using Micromechanics Method
  M.H Yas H Shahrani Korani F Zare Jouneghani
  10.22034/jsm.2019.584854.1394
• Open Access Article
  • Abstract Page
  • Full-Text
  
  49 - Influence of Addendum Modification Factor on Root Stresses in Normal Contact Ratio Asymmetric Spur Gears
  R Prabhu Sekar R Ravivarman
  10.22034/jsm.2019.664230
• Open Access Article
  • Abstract Page
  • Full-Text
  
  50 - The Effects of Forming Parameters on the Single Point Incremental Forming of 1050 Aluminum Alloy Sheet
  R Safdarian
  10.22034/jsm.2019.668616
• Open Access Article
  • Abstract Page
  • Full-Text
  
  51 - Noise Effects on Modal Parameters Extraction of Horizontal Tailplane by Singular Value Decomposition Method Based on Output Only Modal Analysis
  P Jalali S Varahram R Hassannejad M.H Sadeghi
  10.22034/jsm.2019.666809
• Open Access Article
  • Abstract Page
  • Full-Text
  
  52 - An Efficient Finite Element Formulation Based on Deformation Approach for Bending of Functionally Graded Beams
  H Ziou M Himeur H Guenfoud M Guenfoud
  10.22034/jsm.2019.1867884.1437
• Open Access Article
  • Abstract Page
  • Full-Text
  
  53 - Fatigue Crack Growth in Plastically Compressible Solids: Role of Negative Stress Ratio, Plastic Compressibility and Strain Softening
  Y Mittal D Khan S Pandey G.Chand Gupta
  10.22034/jsm.2020.1899251.1587
• Open Access Article
  • Abstract Page
  • Full-Text
  
  54 - A New Numerical Study Method of Thermal Stress Distribution and Tortuosity Effectiveness in an Anode Porous Electrode for a Planar Solid Oxide Fuel Cell
  I.E Fahs M Ghasemi
  10.22034/jsm.2019.1870627.1455
• Open Access Article
  • Abstract Page
  • Full-Text
  
  55 - Vibration of Timoshenko Beam-Soil Foundation Interaction by Using the Spectral Element Method
  S Hamioud S Khalfallah S Boudaa
  10.22034/jsm.2020.1879476.1503
• Open Access Article
  • Abstract Page
  • Full-Text
  
  56 - On Validity of Analytical Method in Cracked Column Post-Buckling Analysis Using Empirical and Numerical Investigations
  K Salmalian A Alijani H Ramezannejad Azarboni
  10.22034/jsm.2020.1904760.1623
• Open Access Article
  • Abstract Page
  • Full-Text
  
  57 - Static Analysis and Fatigue of DHS Implants to Treatment Femoral and Intertrochanteric Neck Fractures Using Ti6Al4V and SS316 Alloys, A Finite Element Analysis
  A Shokrgozar Navi S Etemadi Haghighi M Haghpanahi A Momeni
  10.22034/jsm.2021.1921808.1675
• Open Access Article
  • Abstract Page
  • Full-Text
  
  58 - Fatigue Life Assessment for an Aluminum Alloy Piston Using Stress Gradient Approach Described in the FKM Method
  H Ashouri
  10.22034/jsm.2021.1898031.1582
• Open Access Article
  • Abstract Page
  • Full-Text
  
  59 - Fatigue Life Analysis of the Propeller Shafting System of a VLCC Ship Powertrain System Using Finite Element or Distributed-Lumped Methods
  A Gholami S. A Jazayeri Q Esmaili
  10.22034/jsm.2021.1924081.1683
• Open Access Article
  • Abstract Page
  • Full-Text
  
  60 - New Two 20-Node High-Order Finite Elements Based on the SFR Concept for Analyzing 3D Elasticity Problems
  H Djahara K Meftah L Sedira A Ayadi
  10.22034/jsm.2021.1942740.1718
• Open Access Article
  • Abstract Page
  • Full-Text
  
  61 - Mixed-Mode Stress Intensity Factors for Surface Cracks in Functionally Graded Materials Using Enriched Finite Elements
  J Sheikhi M Poorjamshidian S Peyman
• Open Access Article
  • Abstract Page
  • Full-Text
  
  62 - Multiscale Analysis of Transverse Cracking in Cross-Ply Laminated Beams Using the Layerwise Theory
  W Jin Na J.N Reddy
• Open Access Article
  • Abstract Page
  • Full-Text
  
  63 - Thermal Vibration of Composites and Sandwich Laminates Using Refined Higher Order Zigzag Theory
  A Chakrabarti S.K Singh A.H Sheikh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  64 - Buckling Analysis of Rectangular Functionally Graded Plates with an Elliptic Hole Under Thermal Loads
  R Rezae A.R Shaterzadeh S Abolghasemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  65 - Creep Life Forecasting of Weldment
  J Jelwan M Chowdhry G Pearce
• Open Access Article
  • Abstract Page
  • Full-Text
  
  66 - Analytical and Numerical Investigation of FGM Pressure Vessel Reinforced by Laminated Composite Materials
  A.R Ghasemi A Kazemian M Moradi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  67 - Hygrothermal Analysis of Laminated Composite Plates by Using Efficient Higher Order Shear Deformation Theory
  S.K Singh A Chakrabarti
• Open Access Article
  • Abstract Page
  • Full-Text
  
  68 - Nonlinear Finite Element Analysis of Bending of Straight Beams Using hp-Spectral Approximations
  R Ranjan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  69 - A Comparative Study of Least-Squares and the Weak-Form Galerkin Finite Element Models for the Nonlinear Analysis of Timoshenko Beams
  W Kim J.N Reddy
• Open Access Article
  • Abstract Page
  • Full-Text
  
  70 - An Experimental and Numerical Study of Forming Limit Diagram of Low Carbon Steel Sheets
  M Kadkhodayan H Aleyasin
• Open Access Article
  • Abstract Page
  • Full-Text
  
  71 - Nonlinear Finite Element Eccentric Low-Velocity Impact Analysis of Rectangular Laminated Composite Plates Subjected to In-phase/Anti-phase Biaxial Preloads
  M Shariyat M Moradi S Samaee
• Open Access Article
  • Abstract Page
  • Full-Text
  
  72 - A New Eight Nodes Brick Finite Element Based on the Strain Approach
  Kh Guerraiche L Belounar L Bouzidi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  73 - Dynamic Fracture Analysis Using an Uncoupled Arbitrary Lagrangian Eulerian Finite Element Formulation
  A.R Shahani M.R Amini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  74 - Finite Element Modeling of Crack Initiation Angle Under Mixed Mode (I/II) Fracture
  S.S Bhadauria K.K Pathak M.S Hora
• Open Access Article
  • Abstract Page
  • Full-Text
  
  75 - hp-Spectral Finite Element Analysis of Shear Deformable Beams and Plates
  R Ranjan J.N Reddy
• Open Access Article
  • Abstract Page
  • Full-Text
  
  76 - Dynamics Analysis of the Steady and Transient States of a Nonlinear Piezoelectric Beam by a Finite Element Method
  M Jabbari M Ghayour H.R Mirdamadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  77 - Investigation of Vacancy Defects on the Young’s Modulus of Carbon Nanotube Reinforced Composites in Axial Direction via a Multiscale Modeling Approach
  M.R Davoudabadi S.D Farahani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  78 - Prediction of Crack Initiation Direction for Inclined Crack Under Biaxial Loading by Finite Element Method
  P.C Gope S.P Sharma A.K Srivastava
• Open Access Article
  • Abstract Page
  • Full-Text
  
  79 - A New Finite Element Formulation for Buckling and Free Vibration Analysis of Timoshenko Beams on Variable Elastic Foundation
  A Mirzabeigy M Haghpanahi R Madoliat
• Open Access Article
  • Abstract Page
  • Full-Text
  
  80 - Bending Analysis of Composite Sandwich Plates with Laminated Face Sheets: New Finite Element Formulation
  M.O Belarbi A Tati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  81 - A Rapidly Convergent Nonlinear Transfinite Element Procedure for Transient Thermoelastic Analysis of Temperature-Dependent Functionally Graded Cylinders
  M Shariyat
• Open Access Article
  • Abstract Page
  • Full-Text
  
  82 - On the Analysis of FGM Beams: FEM with Innovative Element
  M Zakeri A Modarakar Haghighi R Attarnejad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  83 - Finite Element Instability Analysis of the Steel Joist of Continuous Composite Beams with Flexible Shear Connectors
  H Bakhshi H.R Ronagh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  84 - Analysis of Laminated Soft Core Sandwich Plate Having Interfacial Imperfections by an Efficient C0 FE Model
  R.P Khandelwal A Chakrabarti P Bhargava
• Open Access Article
  • Abstract Page
  • Full-Text
  
  85 - A Cohesive Zone Model for Crack Growth Simulation in AISI 304 Steel
  F Javidrad M Mashayekhy
• Open Access Article
  • Abstract Page
  • Full-Text
  
  86 - Wave Propagation in Sandwich Panel with Auxetic Core
  D Qing-Tian Y Zhi-Chun
• Open Access Article
  • Abstract Page
  • Full-Text
  
  87 - The Prediction of Forming Limit Diagram of Low Carbon Steel Sheets Using Adaptive Fuzzy Inference System Identifier
  H Aleyasin
• Open Access Article
  • Abstract Page
  • Full-Text
  
  88 - Mechanical Buckling Analysis of Composite Annular Sector Plate with Bean-Shaped Cut-Out using Three Dimensional Finite Element Method
  H Behzad A.R Shaterzadeh M Shariyat
• Open Access Article
  • Abstract Page
  • Full-Text
  
  89 - Spectral Finite Element Method for Free Vibration of Axially Moving Plates Based on First-Order Shear Deformation Theory
  M.R Bahrami S Hatami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  90 - An Investigation into Resonant Frequency of Triangular V-Shaped Cantilever Piezoelectric Vibration Energy Harvester
  R Hosseini M Hamedi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  91 - Predicting Depth and Path of Subsurface Crack Propagation at Gear Tooth Flank under Cyclic Contact Loading
  H Heirani Kh Farhangdoost
• Open Access Article
  • Abstract Page
  • Full-Text
  
  92 - Analytical and Numerical Modelling of the Axisymmetric Bending of Circular Sandwich Plates with the Nonlinear Elastic Core Material
  A Kudin S Choporov Yu Tamurov M.A.V Al Omari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  93 - A New Approach to Buckling Analysis of Lattice Composite Structures
  S.A Galehdari A.H Hashemian J.E Jam A Atrian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  94 - Modal Testing and Finite Element Analysis of Crack Effects on Turbine Blades
  K.R.P Babu B.R Kumar K.M Rao
• Open Access Article
  • Abstract Page
  • Full-Text
  
  95 - An Efficient Strain Based Cylindrical Shell Finite Element
  M Bourezane
• Open Access Article
  • Abstract Page
  • Full-Text
  
  96 - Free Vibration of Functionally Graded Cylindrical Shell Panel With and Without a Cutout
  k.S Sai Ram K Pratyusha P Kiranmayi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  97 - Ductile Failure and Safety Optimization of Gas Pipeline
  P Zamani A Jaamialahmadi M Shariati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  98 - Three-Dimensional Finite Element Analysis of Stress Intensity Factors in a Spherical Pressure Vessel with Functionally Graded Coating
  H Eskandari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  99 - Analyzing Frequency of Conical (∆ shaped) Tanks
  F Saljughi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  100 - Dynamic Simulation and Mechanical Properties of Microtubules
  M Motamedi M Mosavi Mashhadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  101 - Free and Forced Transverse Vibration Analysis of Moderately Thick Orthotropic Plates Using Spectral Finite Element Method
  M.R Bahrami S Hatami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  102 - Extended Finite Element Method for Statics and Vibration Analyses on Cracked Bars and Beams
  F Mottaghian A Darvizeh A Alijani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  103 - Finite Element Modeling of the Vibrational Behavior of Single-Walled Silicon Carbide Nanotube/Polymer Nanocomposites
  S Rouhi R Ansari A Nikkar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  104 - تحلیل پایداری سد خاکی مارون توسط نرم افزار ANSYS و Geo Studio
  علی دلوری نژاد هوشنگ حسونی زاده امیرعباس کمان بدست
• Open Access Article
  • Abstract Page
  • Full-Text
  
  105 - مطالعه شکست سد خاکی با استفاده از مدل GeoStudio (مطالعه مورد: سد خاکی صفارود، کرمان)
  حسن زمانپور مهدی فولادی پناه
• Open Access Article
  • Abstract Page
  • Full-Text
  
  106 - The Effect of Ferrule on Stress distribution in a Two-Rooted Maxillary First Premolar with Cast post and core; A Finite Element Study
  محمد شیشه ساز Reza Amirimoghadam Asadollah Ahmadzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  107 - Analysis and simulation of temperature distribution on the roller body during the hot rolling process
  Amirheshmat Khedmati Bazkiaei Ali Sozangar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  108 - Effect of oil gallery on the piston thermo-mechanical stresses
  Hojjat Ashouri Afshin Afshari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  109 - Simulation of thermal stress in the hot rolling process and its effect on roller failure
  Amirheshmat Khedmati Bazkiaei Ali Sozangar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  110 - Multiaxial fatigue analysis of exhaust manifold with considering viscosity stress
  Hojjat Ashouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  111 - Numerical modeling of soil bearing capacity coefficients under earthquake load
  Pezhman Fazeli سهیل GHoreh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  112 - Investigation of immediate roof’s GSI variations effects on periodic roof weighting interval of underground coal mines By Numerical method
  اصغر Nourozi کاظم Ouroei مهرداد Javadi کامران Goshtasbi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  113 - Investigating the potential of convergence and rock explosion and comparing via the Finite Element numerical Method
  Aref Jaberi Fooad Zamani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  114 - RSM in Analysis of Energy Absorption of thin-walled conical groove tubes filled with polyurethane foam
  بتول سرکبیری علی جهان محمد جواد رضوانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  115 - Review of stress distribution situation and fracture mechanism in flexible pavements using Finite Element Method
  علی بابائی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  116 - Simulation of a sheet hydroforming process for Titanium cup shape products and validation
  فریبرز فروهنده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  117 - Numerical and Experimental Analysis of Coil’s Number of Rounds and Voltage in Electromagnetic Sheet Forming of Aluminum Alloy 1050
  Sajjad Nadian Bersiani Ahmad Keshavarzi امین کلاهدوز
• Open Access Article
  • Abstract Page
  • Full-Text
  
  118 - Numerical Investigation and Optimization of Die Parameters in Parallel Tubular Channel Angular Pressing Process
  Amin Armanian Hassan khademi zadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  119 - Vibration analysis of heavy machine gearbox housing using Finite Element Method
  Hessam Torabzadeh Kashi Mohsen Mardani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  120 - Investigating the effect of flash gutter geometry on material flow and defect formation in cold forging of AA 3003 Aluminum alloy
  milad Bandad Mehrdad Ozve Aminian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  121 - Simulation of the Time and Temperature Effects On Spring Back in Tube Bending Process
  Mohammad Hossein Tehrany Mehrdad Ozve Aminian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  122 - Design and Modeling of Ultrasonic Phased Array Testing and Ultrasonic waves propagation Simulation in Metal Plate by Finite Element Software (ABAQUS)
  shahram yareiee
• Open Access Article
  • Abstract Page
  • Full-Text
  
  123 - use natural frequency to diagnose ankylosed teeth
  zavosh Amini ehsan jamshidi Faezeh Eslamipour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  124 - Experimental and Numerical Investigation of Explosive Wave blasting on the Aluminum Plate
  shahram yareiee majid Ganji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  125 - Investigation on the effect of the honeycomb core orientation to lateral plates on the energy absorption capacity of the sandwich panel used in the elevator hole
  amir ghiasvand hossein ahmadi rashid soran hasanifard
• Open Access Article
  • Abstract Page
  • Full-Text
  
  126 - Investigating the effect of shape and defects of honeycomb structure on its energy absorption capability by finite element method
  Ramin Meshkabadi benyamin tahmaspour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  127 - Developing the Aeroelastic model of a Composite Wind Turbine Blade and Analyzing the Effects of Rotation and Length Increase on Natural Frequencies
  Reza Esbati Lavasani shahrokh shams
• Open Access Article
  • Abstract Page
  • Full-Text
  
  128 - Vibrations and Damping Analysis of Composite Sandwich Panels with Reinforced Kevlar Fibers
  Abdolhossein Fereidoon Ali Hazrati Niyari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  129 - Automotive cylinder block casting defects influence the modal parameters
  Amir Hosein Amoozade Morteza Mohammadzaheri Ehsan Jamshidi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  130 - Modeling of mechanical behavior of a rotating magnetorheological damper
  Iman Bagherzadeh Ali Moazemi Goudarzi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  131 - Fault Detection of Cylinder- head automotive Using Mechanical Waves and Intelligent Techniques
  Mojtaba Doustmohammadi Morteza Mohammadzaheri Ehsan Jamshidi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  132 - Finite Element Model Updating Using Response Function Method
  Mohamad Reza Ashory Hamid Daiyan Ehsan Jamshidi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  133 - Design and optimization of dc brushless permanent magnet motor
  Hassan hatamlu Zahra hatamlu ramin borjali navesi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  134 - New Design of Mems piezoresistive pressure sensor
  Hamsa Kamali Asghar charmin
• Open Access Article
  • Abstract Page
  • Full-Text
  
  135 - Design and simulation of a fast SAW waveguide with Comsol software
  Hadi Amos Majid Ghandchi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  136 - Modeling of Iranian crust deformation in 2007 using satellite geodetic observations
  Tohid malekzadeh Dilmaghani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  137 - Reliability Analysis of a Mounted Moldboard Plow Bottom Standard using the FORM Method
  Seyed Mohammad Reza Nazemosadat Mojtaba Naderi-Boldaji Davoud Ghanbarian Mohammad Amin Nematollahi
  10.22094/joie.2022.1932748.1868
• Open Access Article
  • Abstract Page
  • Full-Text
  
  138 - Dynamic Load Carrying Capacity of Flexible Manipulators Using Finite Element Method and Pontryagin’s Minimum Principle
  Moharam Korayem Mostafa Nazemizadeh Hamed Rahimi nahooji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  139 - Comparison Study on Neural Networks in Damage Detection of Steel Truss Bridge
  Hassan Aghabarati Mohsen Tabrizizadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  140 - The Effect of Soccer Ball Impulse on Lower Limbs of the Human Body
  Leila Shahryari Behtash JavidSharifi JavidSharifi Mohammad Ali Samianifar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  141 - Quasi-static Axial Compression of thin-walled Circular Composite Tubes
  Mohammad Mahdi Kheirikhah Sajjad Dehghanpour Mohsen Rahmani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  142 - Post-Tensioned Steel Connections Self-Centering Behavior Using the Finite Element Method
  Mahmoudreza Shiravand Ahmadreza Torabipour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  143 - The effect of discrete lateral and torsional bracings stiffness on the elastic lateral-torsional buckling of mono-symmetric I beam, under the concentrated moment
  E. Mohammadi J. Asgari Marnani S. Tavousi M.S. Rohanimanesh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  144 - Finite Element Method for Static Cyclic Behavior of Steel Shear Wall with Corrugated Plates
  Mohammad Reza Farhadi Hassan Aghabarati Hadi Niromand Jazi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  145 - Pillow-Shape Base Isolation System and Its Seismic Behavior
  Ali Tayaran Mahmood Hosseini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  146 - Bending Fatigue Tests and Finite Element Models of Steel Rectangular Hollow Sections [SRHS]
  islam Ezz El-Arab W Gray
• Open Access Article
  • Abstract Page
  • Full-Text
  
  147 - Free vibration analysisof soft-core composite-faced sandwich plates using three-dimensional finite element method
  Mohammad Mahdi Kheirikhah Hasan Aghabarati Pooneh Khosravi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  148 - The Effect of Lower Detachment Zone on Buckle Folds Geometry
  O Barani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  149 - A Case Study of Performance Improvement of Femur Prosthesis
  Leila Shahryari Behtash JavidSharifi Mehdi Dabaghmanesh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  150 - Analysis of Masonry Infill Panels Retrofitted with FRP Sheets in R/C Frames
  Hosein Parastesh Murat Saatcioglu
• Open Access Article
  • Abstract Page
  • Full-Text
  
  151 - Finite element modeling of a pavement piezoelectric energy harvester
  Ehsan Latifi Pakdehi Ali Akbar Pasha Zanoosi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  152 - Effect of flower pattern on the curvature of high-strength steel pipe in roll forming
  M. Karimi Firouzjaei H. Moslemi Naeini B. Abbaszadeh M.M. Kasaei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  153 - Fracture analysis of conical shells containing an internal semi-elliptical crack
  C. Burvill M.M. Kheirikhah S. Omidi S. Gohari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  154 - Forming limit curves of AA3105 on multiple temperature conditions: numerical investigation and experimental verification
  Behzad Hadiyan Ramin Hashemi Habibollah Akbari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  155 - Finite element simulation of pyroplastic deformation, anisotropic shrinkage and heterogeneous densification for ceramic materials during liquid phase sintering process
  Hamed Yaghoubi Esmail Salahi Fateme Taati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  156 - Prediction of forging force and barreling behavior in isothermal hot forging of AlCuMgPb aluminum alloy using artificial neural network
  hamidreza Rezaei Ashtiani p shahsavari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  157 - Optimization of the strain distribution in the roll forming process using the desirability function and finite element methods
  Siroos Ahmadi Vali Alimirzaloo Meysam Abdollahzade Gavgani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  158 - Upper bound and numerical analysis of cyclic expansion extrusion (CEE) process
  M. M. Samandari S.H.R. Torabi Ghader Faraji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  159 - Simulation of Heat Transfer and Recrystallization in Aluminum Alloy AA 6070 by TIG Welding Method
  Mir Javad Mir Najd Gerami Eslam Ranjbarnodeh Mehdi Farajpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  160 - Plastic deformation analysis in parallel tubular channel angular pressing (PTCAP)
  Ghader Faraji Mahmoud Mousavi Mashhadia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  161 - Nonlinear bucking analysis of Polystyrene, Polyvinyl chloride, and Polypropylene cylindrical nano-composite shells reinforced by carbon nanotubes based on micro-mechanics and finite element methods
  Reza Hosseini-Ara Mohsen Akbari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  162 - A new approach for achieving excellent strain homogeneity in tubular channel angular pressing (TCAP) process
  Ghader Faraji F. Reshadi M. Baniasadia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  163 - 3D finite element study of temperature variations during equal channel angular pressing
  Mehdi Shaban Ghazani A. vajd B. Mosadeg
• Open Access Article
  • Abstract Page
  • Full-Text
  
  164 - Effect of Material Gradient on Stresses of Thick FGM Spherical Pressure Vessels with Exponentially-Varying Properties
  Mohammad Nejad Mahboobeh Gharibi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  165 - Plastic deformation of 7075 Aluminum Alloy using Integrated Extrusion-Equal Channel Angular Pressing
  mehdi shaban sahel gozalzadeh beitallah eghbali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  166 - Finite Element Modeling of Strain Rate and Grain Size Dependency in Nanocrystalline Materials
  Minoo Tabanfard
• Open Access Article
  • Abstract Page
  • Full-Text
  
  167 - Optimization of ECMAP parameters in production of ultra-fine grained Al1050 strips using Grey relational analysis
  Peyman Keshtiban Mohammad Zadshakouyan Ghader Faraji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  168 - Modeling and production of high strength Al strips by equal channel multi angular pressing method
  Peyman Keshtiban Mohammad Zadshakouyan Ghader Faraji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  169 - Numerical Analysis of Severe Plastic Deformation by High Pressure Torsion
  mohammadreza kaji Ghader Faraji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  170 - New Iteration based Algorithm for Shape Optimization of Internal and External Boundaries of the Initial Blank in the Deep Drawing Process
  Hamidreza Gharehchahi Mohammad Javad Kazemzadeh-Parsi Ahmad Afsari Mehrdad Mohammadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  171 - Continuous Grain Refinement of Pure Aluminum During Cyclic Contraction/Expansion Extrusion (CCEE) Analyses by Micromechanical-Based FE and Experimental Methods
  Hossein Jafarzadeh Sina Hassan Alipouri Fard Alireza Babaei
  10.71670/jmatpro.2024.981647
• Open Access Article
  • Abstract Page
  • Full-Text
  
  172 - Simulation of Plastic Deformation Behavior of Ti-6Al-4V Alloy by Finite Element Method
  E Amini F Madadi Sh Katani M Atapoor
• Open Access Article
  • Abstract Page
  • Full-Text
  
  173 - Empirical and Numerical Study of Gas Turbine Disks under Mechanical Stress and Temperature Gradient
  Rasoul Yari Yari Hamid Zarepour Aazam Ghassemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  174 - Numerical Study of Effective Parameters in the Deep Drawing Process of a Cylindrical Cup and Comparison with Experimental Results
  Hamidreza Gharehchahi Mohammad Javad Kazemzadeh-Parsi Ahmad Afsari Mehrdad Mohammadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  175 - A New Geometry Modification Algorithm for Blank Shape Optimization in the Deep Drawing Process
  Hamidreza Gharehchahi Mohammad Javad Kazemzadeh-Parsi Ahmad Afsari Mehrdad Mohammadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  176 - A Numerical Investigation the Effects of the Voltage on the Displacement and Stress of Copper-based Ionic Polymer-Metal Composites
  Hamid Soleimanimehr Amin Nasrollah
• Open Access Article
  • Abstract Page
  • Full-Text
  
  177 - Mechanical Stability of RCSed and ECAPed Intramedullary 316L Stainless Steel Nails in the Treatment of Diaphyseal Bone Fractures
  Abdolreza Rastitalab Salar Khajehpour Ahmad Afsari Shahin Heidari Javad Dehghani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  178 - An Investigation of Using RCS-processed Intramedullary Stainless Steel 316L Nail in the Treatment of Diaphyseal Bone Fractures
  Abdolreza Rastitalab Salar Khajehpour Ahmad Afsari Shahin Heidari Javad Dehghani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  179 - Thermal and Stress Analysis in Butt, T-shaped and Tubular Joints in the Welding Process of Dissimilar Parts
  Adel Tavabe Behdad Jahanbeen Seyed Mohammad Reza Nazemosadat Ahmad Afsari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  180 - Evaluation of Stability and Reliability of Motorized Unilateral External Fixator, Designed and Simulated using Finite Element Method to Treat Bone Fractures and Bone Loss
  Alireza Bahramkia Mehran Fakhraie Salar Khajehpour Seyed Mohammad Tahami Raheb Gholami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  181 - CAD Model and Finite Element Analysis of a Knee Brace for General Applications
  Shayan Babaeifard Mohammad Saadat Amirhossein Badami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  182 - Experimental and FEM Analysis of Ribs Defects on Composite Lattice Cylindrical Shells
  Amin Kolahdooz Seyyed Ali Latifi Rostami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  183 - Analytical, Experimental and Finite Element Investigation of Internal Pressure Effect in Hydroforming Process on Metallic Bellows Produced from Thin Wall Tube of Austenitic Stainless Steel Grade 316L
  Mehdi Arabbeigi Mehran Moradi Boozarjomehr Ghasemi Majid Sattar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  184 - Using Rubber Pad Forming Process for Local Compression in Assembling of Vehicle Structure Tubes
  Meysam Darvishi Mohammad Sedighi Mehrdad Khandaie
• Open Access Article
  • Abstract Page
  • Full-Text
  
  185 - The Optimization of the Effective Parameters of the Die in Parallel Tubular Channel Angular Pressing Process by Using Neural Network and Genetic Algorithm Methods
  Amin Armanian Hassan Khademi Zadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  186 - Analytical and Numerical Investigation of Significant Parameters on Strength of Electromagnetically Assembled Products Joints
  Mehdi Zohour Bahman Ghorbani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  187 - Numerical/Experimental Analysis of the Deformation of Tubes under Concentrated Load
  Javad Jafari Fesharaki Omid Rejali Seyed Ghasem Madani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  188 - Analytical and Numerical Investigation of Significant Parameters on Strength of Electromagnetically Assembled Aluminum Tube Joints
  Mehdi Zohoor Bahman Ghorbani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  189 - Deformation of Al Alloy during Integrated Extrusion and ECAP: A Simulation Research
  Ankit Sahai Shanti S. Sharma Suren N. Dwivedi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  190 - A Study on the Forming of Sheet Metal Parts Using Multi-Point Forming Technology
  Vahid Rikhtehgar Nezami Behrooz Zareh Abbas Vafaee Sefat
• Open Access Article
  • Abstract Page
  • Full-Text
  
  191 - Numerical and Experimental Study of Residual Stress Measurement and Thickness Distribution of T-shape Steel Tube Produced by Tube Hydroforming
  Javad Shahbazi Karami Gholamhasan Payganeh Mohsen Khodsetan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  192 - Numerical Analysis of the Effect of Sinusoidal Pressure Path on Thinning of Tube in Hot Metal Free Bulging Process
  Ali Talebi Anaraki Mohsen Loh-Mousavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  193 - Finite Element Modeling and Experimental Study of the Spline Tube Forming
  Masoud Feizi Reza Jafari Nedoushan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  194 - Simulation of a Microgripper with Electrothermal Actuator Using COMSOL Software Based on the Finite Element Method
  Amin Rouhani Esfahani Mojtaba Kolahdouzan Mehran Moradi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  195 - Finite Element Simulation of Hydrostatic Extrusion Process to Produce Thin Bimetallic Parts
  Hamid Montazerolghaem Ali Delfani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  196 - Experimental Investigation and Analysis of Manufacturing Wind Turbine Blades Produced by Hydroforming of Aluminum Alloy AA5754
  Javad Shahbazi Karami Hamed Bakhtiarizade Mohsen Shahmoradi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  197 - Stress Concentration Factor in a Functionally Graded Material Plate around a Hole
  Javad Jafari Fesharaki Seyed Ghasem Madani Davood Seydali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  198 - A Novel Approach for Earthing System Design Using Finite Element Method
  Sajad Samadinasab Farhad Namdari Mohammad Bakhshipoor
• Open Access Article
  • Abstract Page
  • Full-Text
  
  199 - Rotor Design and Analysis of 4/2 SRMs to Produce Continuous Torque using Finite Element Method
  Davood Karamalian Behrooz Majidi Mohammad Reza Yousefi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  200 - Electromagnetic Force Analysis of Transformer on the Ferroresonance due to Consecutive 3–Phase Short–Circuit Faults Using Finite Element Method (FEM)
  Ali Ahmadpour SeyedJalal Seyed Shenava Abdolmajid Dejamkhooy Elham Mokaramian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  201 - Optimal Design, Modeling, and Evaluation of Single-Phase Axial Flux Induction Motor with a Permanent Capacitor Using Improved Particle Swarm Optimization Algorithm (IPSO)
  Amin Aboutalebi Najafabadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  202 - Design and Torque Analysis of Double-Slot Surface and Spoke-Type BLDC Motor Using Finite Element Method
  Ali Esteki Behrooz Majidi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  203 - Design of Induction Switched Reluctance Motor for Propulsion Electric Bus
  Ali Madanimohammadi Mohammadali Abbasian Majid Delshad Hadi Saghafi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  204 - StatorCurrent Harmonics Evaluation by Flexible Neural Network Method With Reconstruction Structure During Learning Step Based On CFE/SS Algorithm for ACEC Generator of Rey Power Plant
  MR Yousefi Mohammad Teshnehlab
• Open Access Article
  • Abstract Page
  • Full-Text
  
  205 - Modeling, Design and Analysis of a Electrodynamic Levitation System by Considering the Skin Effect
  Mohammad Rajabi Sabadani Abbas Najjar Khadabakhsh Ahmad Darabi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  206 - A Novel Approach for Eccentricity Fault Detection in Squirrel Cage Induction Motors
  Mehdi Ahmadi Javad Poshtan Seyed Mehdi MirImani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  207 - Numerical analysis of the effects of a wall barrier with eco-line spheres on diverting the rupture path of a 45-degree reverse dip-slip fault
  Nima Ajeli Lahiji Behnam Adhami Gholamreza Ghodrati Amiri Elham Rajabi
  10.30495/civil.2023.1983553.1350
• Open Access Article
  • Abstract Page
  • Full-Text
  
  208 - Numerical investigation of new steel connection using short stub column
  Farzad Hatami mehrdad taheripour Reza Raoufi
  10.30495/civil.2023.1974250.1310
• Open Access Article
  • Abstract Page
  • Full-Text
  
  209 - Predicting Hook -Shaped and Concrete Steel Fibers Adhesion Parameters Using Artificial Neural Networks
  amir ebrahim akbari baghal Amir ebrahim akbari bagal
• Open Access Article
  • Abstract Page
  • Full-Text
  
  210 - A discussion about the efficiency of the modified element-free Galerkin method in static problems and the improvement
  ramin vafaeipoor Ali Zareh Alireza Alizadeh Majdi Fariba Behrouz Sarand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  211 - Study on behavior of Concrete Filled Double Skin Steel Tubular Under Torsion and Cyclic Loading
  Ahmad maleki reza khalili
• Open Access Article
  • Abstract Page
  • Full-Text
  
  212 - Introducing and Numerical Modelling of a Type of Reinforced Composite Panel as a Modern Technology in the Construction Industry
  mehrdad movahednia Mohammad Reza Tabeshpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  213 - Punching Shear in Fat Slabs and Suitable Methods to Prevent Shear Failure in Slabs
  javad ezati arasto Armagani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  214 - Numerical Study of the Effect of Sacrificial RC Slab on the Performance of Underground Arc Shaped Structures under the Explosion Load
  seyyed safar saleh kutah esmaeil izadi zaman abadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  215 - Investigation of flexural strength of ultra-high performance concrete reinforced with steel fibers using multiscale finite element model
  Amir ebrahim akbari bagal Ahmad maleki ramin vafaeipoor
  10.30495/civil.2021.684368
• Open Access Article
  • Abstract Page
  • Full-Text
  
  216 - Investigation of the effective factors for eliminating the defect in the CFT columns with an asymmetric L-shaped columns by the finite element Analysis
  seyed ali mousavi davoudi morteza naghipour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  217 - Evaluating the seismic performance of steel-sma hybrid Bracing structures
  mohammad hooshmand behzad rafezi jafar khalileAlafi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  218 - The study of mechanical behavior of composite steel columns filled with concrete with cross-section (T) shape under numerical sensitivity analysis of finite element under axial load
  seyed ali mousavi davoudi morteza naghipour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  219 - Numerical and Experimental Investigation of Multi-Perforated Steel Shear Wall Under Cyclic Loading
  Ali sahebjam Hossein shokati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  220 - Investigation of the shear and torsional capacity and confinement of rectangular reinforced concrete beams with spiral stirrups
  hamed sefidian ashkan khodabandelou
• Open Access Article
  • Abstract Page
  • Full-Text
  
  221 - Offering a New Computational Relationship to Evaluate the Bearing Capacity of the Strip Footing on the Two Frictional -Cohesive Layered Ground
  Loghman Rahimi navid ganjian Mikaiel Youssefzadehfard Mehdi Derakhshandi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  222 - Numerical Study of a Reinforced Concrete Frame with Low Yield Point Infill Plates
  aman hassanzade rahimabadi yahya nasiraa ali ghamari
  10.30495/civil.2022.690629
• Open Access Article
  • Abstract Page
  • Full-Text
  
  223 - The Effect of Simultaneous and Multi-Stage Explosions on the Response of Structures Buried in Soil
  Saeid Firouzabadi Hadi Dashti Alireza Fiouz
  10.30495/civil.2022.693717
• Open Access Article
  • Abstract Page
  • Full-Text
  
  224 - Study of the Behavior of Composite Steel Columns Filled with Short (non-slender) Concrete with (L)-shaped Geometric Cross Section under Numerical Sensitivity Analysis (FEM) with Axial Compression Loading
  seyed ali mousavi davoudi morteza naghipour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  225 - Investigation of the Effect of Trigonometric Rotation of the Column on Punching Shear Capacity in Two-Way Hollow Slabs Using Finite Element Metho
  hadi azizian mohammad ali lotfollahi yaghin Alaaddin behravesh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  226 - Performance of Gaskar Historical Minaret against Natural Wind and Earthquake Hazards
  Majid Pouraminian Elahe Didevar
  10.30495/civil.2021.684449
• Open Access Article
  • Abstract Page
  • Full-Text
  
  227 - Study the Column's Behavior of Reinforced Concrete under Cycle Loadingbefore and after the Improvement with Polymer Fibers
  sina kharazmi Alireza rasekhisahneh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  228 - Numerical Study on Behavior of K-joints of Concrete-filled Steel Tubular
  mostafa attarmosavi ahmad maleki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  229 - Numerical investigation of the new steel connection using short stub column
  mehrdad taheripour Farzad Hatami Reza Raoufi
  10.30495/civil.2023.703236
• Open Access Article
  • Abstract Page
  • Full-Text
  
  230 - Numerical Analysis of the Effect of a Wall barrier with Eco-line Spheres on Diverting the Faulting Path of a 45-Degree Reverse dip-slip Fault
  Nima Ajeli Lahiji Behnam Adhami Gholamreza Ghodrati Amiri Elham Rajabi
  10.30495/civil.2023.707422
• Open Access Article
  • Abstract Page
  • Full-Text
  
  231 - Analysis of the body of the double curvature Bakhtiari concrete dam by three dimensional finite element Encoding
  Omid Bakhtiyarinejad Hooshang Hassoni Zadeh Ehsan Derikvand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  232 - Comparison of Conventional Salient-Pole Synchronous Generators and Permanent-Magnet-Assisted Salient-Pole Synchronous Generators based on Finite Element Analysis
  Reza Ilka Yousef Alinejad-Beromi Hossein Asgharpour-Alamdari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  233 - Finite element numerical modeling of geogrid-reinforced shallow foundation’s behavior on loose soils
  Morteza Alemyparvin
  10.30495/geotech.2020.679340
• Open Access Article
  • Abstract Page
  • Full-Text
  
  234 - Numerical finite element modeling for earth-dam grouting and curtains wall design by Plaxis software
  Reza Poursalim Alireza Alizade Majdi
  10.30495/geotech.2020.679345
• Open Access Article
  • Abstract Page
  • Full-Text
  
  235 - Deformations Analysis and Finite Element Numerical Modeling of Soil’s Excavations Improved by Soil Nailing
  Morteza Alemyparvin
  10.30495/geotech.2020.680482
• Open Access Article
  • Abstract Page
  • Full-Text
  
  236 - Application of micro-pile for excavated trench dynamic stabilization by using three-dimensional finite element numerical method
  Leyla Hamedi Ali Sanaeirad
  10.30495/geotech.2020.680485
• Open Access Article
  • Abstract Page
  • Full-Text
  
  237 - Three-dimensional Finite Elements Numerical Modeling for Strip Foundations on Granular Soils Reinforced with Micro-piles
  Leyla Hamedi Ali Sanaeirad
  10.30495/geotech.2021.686314
• Open Access Article
  • Abstract Page
  • Full-Text
  
  238 - Effect of Geogrid on Increasing the Bearing Capacity of Strip Foundations in Sandy Soils
  Farhad Pirmohammadi Alishah Mehdi Kanani Mehdi Mohammadrezaei Sattar Shafiei
  10.30495/geotech.2021.688913
• Open Access Article
  • Abstract Page
  • Full-Text
  
  239 - Numerical modeling and seismic behavior analysis of strip foundation on sandy soils
  Morteza Alemyparvin Mehdi Kouhdaragh
  10.30495/geotech.2022.692381
• Open Access Article
  • Abstract Page
  • Full-Text
  
  240 - The effect of different arrangements of longitudinal reinforcements on the capacity of wide concrete beams
  Javad Mahdian pari alireza faroughi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  241 - Nonlinear Analysis of Reinforced Concrete Columns with Fiber Reinforced Polymer Bars
  Ehab M Lotfy
• Open Access Article
  • Abstract Page
  • Full-Text
  
  242 - Stability Analysis Of 3-d Conventional Pallet Rack Structures With Semi-rigid Connections
  Kamal M. Bajoria Keshav K. Sangle Rajshekar S. Talicotti
• Open Access Article
  • Abstract Page
  • Full-Text
  
  243 - Study of Dynamic Infinite Element Used for Soil Structure Interaction
  Anand M. Gharad R. S. Sonparote
• Open Access Article
  • Abstract Page
  • Full-Text
  
  244 - به هنگام سازی مدل اجزا محدود قاب با استفاده از روش مستقیم و پایه حساسیت
  مهدی تاجداری کاوه عباسی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  245 - بررسی انتشار ترک در مواد الاستیک خطی با در نظر گرفتن ضریب تصحیح مسیر ترک
  مهدی پورمحمود
• Open Access Article
  • Abstract Page
  • Full-Text
  
  246 - محاسبه غلظت تنش در اطراف یک سوراخ در یک لایه ترکیبی ترکیبی با استفاده از روش المان محدود
  پژمان تقی پور پدرام لورزاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  247 - مدلسازی شبکیه چشم انسان در بیماران دارای گلوکوم
  افسانه صافدل کامران حسنی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  248 - بررسی پارامترهای موثر بر تنش و جا به جایی در ورق های موجدار متقارن محوری
  رضا سلامی ناصریان وحید کدخدایی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  249 - تحلیل استاتیکی، دینامیکی و ارتعاش آزاد ورق متخلخل مدرج تابعی با استفاده از تئوری تغییر شکل برشی مرتبه اول ورق
  کامران عاصمی سعید خبری مسعود بابایی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  250 - Study of Reduce Harmonic and Increasing Positioning Determination in Variable Reluctance Resolver with Area Couplings
  Roya Shmsali Hamid Lesani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  251 - Characterization of Electromagnetic Force of the Transformer During the Occurrence of a Ferroresonance Phenomenon by FEM
  Iman Rostami ahmad zare alireza shams saeid saberi firoozi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  252 - A New Restructured Shaded Pole Induction Motor- 3D Finite Element Analysis and Experimental Verification
  Sadegh Shamlou Mojtaba Mirsalim
• Open Access Article
  • Abstract Page
  • Full-Text
  
  253 - Prediction of Polymeric Insulator Leakage Current under Water Droplets Using Neural Network
  Zahra Ghiasi Faramarz Faghihi A.A. Shayegani Akmal
• Open Access Article
  • Abstract Page
  • Full-Text
  
  254 - Design Optimization for Total Volume Reduction of Permanent Magnet Synchronous Generators
  Reza Ilka Yousef Alinejad-Beromi Hossein Asgharpour-Alamdari Hamid Yaghobi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  255 - PENALTY METHOD FOR UNILATERAL CONTACT PROBLEM WITH COULOMB’S FRICTION FOR LOCKING MATERIAL
  Salah Bourichi El Essoufi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  256 - The effects of plant density and nitrogen fertilizer amounts as top dressing on yield of potato at Damavand region
  A. Roozbahani M. M. Mirzaei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  257 - Allelopathical weed control in potato (Solanum tuberosum L.) The effects of water stress at silique formation and grain filling stage on yield and yield components of Rapeseed cultivars at Karaj region
  H. Nezami ranjbar A. H. Shirani Rad H. Madani K. Kalarestaghi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  258 - The effects of salinity on germination of three clover species(Trifolium spp.)
  N. Abdi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  259 - Life table and reproduction parameters of Orius albidipennis Reuter on different developmental stages of Tetranychus urticae Koch
  K. Eskandarli A.A. Talebi R. Vafaei Shoushtari A. Hosseininia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  260 - The efficiency of two methods of egg's lacewing releasing with 1:5 ratio in greenhouse
  Z. R. Kerahroodi B. Hatami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  261 - Connecting rods, fatigue analysis of universal tractor via finite element method by using ANSYS
  S. A. Mireei M. Omid A. Jafari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  262 - تحلیل عددی تاثیر پارامترهای ورودی بر ارتفاع بالج در فرآیند شکل‌دهی آزاد داغ لوله به وسیله گاز
  مهدی چوگان محسن لوح موسوی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  263 - بررسی تأثیر طول و گام رزوه بر توزیع تنش در ایمپلنت‌ دندان و استخوان اطراف به کمک روش المان محدود
  مسیح فیروزبخت حامد عجبی نائینی مصطفی پیرمرادیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  264 - ارائه یک طرح جدید جهت اتصال لوله‌های آلومینیومی در سازه‌های زیر سطحی
  غلامرضا مزروعی علی حیدری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  265 - تحلیل عددی تاثیر فشار ضربانی برکاهش ضخامت در فرآیند شکل‌دهی آزاد داغ لوله به وسیله گاز
  علی طالبی انارکی محسن لوح موسوی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  266 - Stress intensity factor at the hole-edge cracks tips in a finite plate
  Mohammad Rahim Torshizian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  267 - Thermo-mechanical analysis of a coated cylinder head
  Hojjat Ashouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  268 - Experimental Investigation and Numerical Prediction of Fatigue Life in Force Fitted Fastener Holes
  Hadi Taghizadeh Tagbakhsh Chakherlou
• Open Access Article
  • Abstract Page
  • Full-Text
  
  269 - Experimental Study of the Effect of Laser-Cutting Process Parameters on Heat Distribution and Cutting Edge Quality of Steel Sheets
  Mahsa Mokhtarian Azam Gasemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  270 - Thermo-mechanical fatigue simulation of exhaust manifolds
  Hojat Ashori
• Open Access Article
  • Abstract Page
  • Full-Text
  
  271 - Using finite element model in calculation of stress concentration factor around an elliptical hole in composite hybrid lamina
  Pedram Lorzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  272 - Effect of residual stress in low cycle fatigue for coated exhaust manifold
  Hojjat ashouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  273 - Stabilized crack-opening stresses as a function of R-ratios and stress levels
  Rahi Chermahini Majid Jabbari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  274 - Estimation of fatigue lifetime of a cervical disc prosthesis using finite element and experimental investigation of the amount of wear
  Sana Ghafarmoghadam Alireza Seifzadeh Ali Mokhtarian Reza Abedinzadeh
  10.71939/jsme.2024.1092093
• Open Access Article
  • Abstract Page
  • Full-Text
  
  275 - روش بهبود یافته المان محدود شبکه ثابت برای حل مسائل ارتجاعی سه بعدی مواد دارای خواص تابعی
  محمد جواد کاظم زاده پارسی فرهنگ دانشمند
• Open Access Article
  • Abstract Page
  • Full-Text
  
  276 - تأثیر هندسه شیار مورب U شکل بر نسبت مودها در مود ترکیبی I و II
  احسان براتی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  277 - طرح ابتکاری مدل معادل برای شبیه‌سازی فرایند جوشکاری
  علی حیدری محمدرضا فروزان جعفر گلستانه
• Open Access Article
  • Abstract Page
  • Full-Text
  
  278 - پیش بینی عمر خستگی نمونه های ناچ دار با استفاده از معیارهای خستگی چندمحوری
  فیروز اسماعیلی گلدرق سجاد برزگر محمدی علیرضا بابائی امیر افکار
• Open Access Article
  • Abstract Page
  • Full-Text
  
  279 - بررسی نرخ سایش غلتک‌ها در فرایند شکل‌دهی مجدد غلتکی سرد به‌کمک شبیه‌سازی اجزای محدود
  مهدی سلمانی تهرانی رضا خدابنده شهرکی حسام ولیدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  280 - بررسی تجربی و عددی طراحـی پیش فرم در کشش عمیق چند مرحله ای ورق های نازک فولادی استحکام بالا
  اکبر زمانی علیشاه مهدی تاجداری جعفر اسکندری جم جمال صیدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  281 - تحلیل عددی اثر فشار نوسانی بر بهبود شکل‌دهی در فرایند هیدروفرمینگ لوله های خمیده به روش اجزای محدود
  امیر خورسندی محسن لوح موسوی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  282 - Presentation and Analysis of Methods for Increasing Glue Joint Strength in the Same Length Joint
  A.H. Ehsani Ehsani M. Shirzadian Gilan A. Ghafori Sayad A. Shokrgozar Navi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  283 - تشخیص معکوس حفره دایره‌ای د‌ر جسم دو بعدی با اندازه‌گیری‌های دمایی و شبکه عصبی مصنوعی
  محمد امین احمدفرد محمد جواد کاظم زاده پارسی علیرضا تهور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  284 - بررسی اثر نسبت منظری نانولوله های کربنی روی خواص مکانیکی نانوکامپوزیت پلیمری
  محمد هاشمی گهروئی حسین گلستانیان مهدی سلمانی تهرانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  285 - بررسی رفتار سازه های فلزی دو لایه هم جنس و غیرهم جنس تحت بارگذاری ضربه سرعت پائین
  هادی خرّمی شاد محمد باقری توفیقی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  286 - تحلیل لهیدگی محوری لوله های جدارنازک ساندویچی به کمک آزمایش های تجربی و شبیه سازی اجزاء محدود
  سجاد آذرخش عباس رهی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  287 - تحلیل کمانش الاستیک پوسته‌های مرکب با سطح مقطع بیضی تحت بار فشاری محوری
  منصور درویزه ابوالفضل درویزه رضا انصاری الهام کاظمی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  288 - بررسی تاثیر مکان میله‏ های حلقوی در پره‏ های مرحله آخر توربین‏ بخار روی فرکانس‏های طبیعی آن
  مهدی نوذرپور عباس رهی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  289 - ارائه مدلی برای پیش بینی سایش غلتک‌های نورد گرم
  امیر نورانی محمود سلیمی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  290 - بررسی انتشار ترک در مواد الاستیک خطی با در نظرگرفتن ضریب تصحیح مسیر ترک
  مهران مرادی مهدی پورمحمود
• Open Access Article
  • Abstract Page
  • Full-Text
  
  291 - تحلیل اجزاء محدود غیرخطی تنشهای ترموالاستیک دیسک دوار FGM با در نظر گرفتن وابستگی خواص مواد به دما
  مهرنوش دمیرچلی محمد آزادی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  292 - مقایسه بین نتایج آزمایشگاهی، تئوری و اجزای محدود برای فرایند کشش سیم مسی
  محمد احمدپور حسن خادمی‌زاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  293 - تحلیل عددی و تجربی شکلدهی لوله های مسی مستطیلی بوسیله غلتک‌کاری متوالی لوله مدور پر شده با بیسموت
  علی بصیرت نیا محسن لوح موسوی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  294 - طراحی بهینه پروفیل قالب اکستروژن متقارن
  حسن نحوی مهدی حسن زاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  295 - تحلیل استاتیکی و دینامیکی شاسی و سازه اتوبوس O-457
  ابوالفضل محبوبی شاد محسن اصفهانیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  296 - بررسی عددی تاثیر مسیرهای فشار دوخطی بر پرشدن گوشه قالب در فرآیند هیدروفرمینگ لوله در قالب جعبه ای شکل
  محسن لوح موسوی میثم شهبازی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  297 - تحلیل تجربی و عددی آهنگری سرد دورانی چرخ‌دنده مخروطی با آلیاژ 16MnCr5
  سعید بهشتیان مسگران محمد علی صادقی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  298 - تحلیل ترکهای خستگی سرسیلندر موتور دیزل با استفاده از مدل ویسکوپلاستیسیته دو لایه و درنظر گرفتن اثر ویسکوزیته
  حجت عاشوری بابک بهشتی محمد رضا ابراهیم زاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  299 - شبیه سازی عددی برخورد پرتابه‌های سرعت پایین با سطح آب
  نجمه خضرائیان ناصر دشتیان گرامی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  300 - بررسی پارامتر‌های ولتاژ و تعداد دور سیم‌پیچ بر روی فرآیند شکل‌دهی الکترومغناطیس ورق های V شکل آلومینیوم
  سجاد نادیان برسیانی احمد کشاورزی امین کلاه دوز
• Open Access Article
  • Abstract Page
  • Full-Text
  
  301 - Prediction of Adhesion Parameters of Hook-shaped Steel Fibers and Concrete Using Artificial Neural Networks
  Amir ebrahim akbari bagal
• Open Access Article
  • Abstract Page
  • Full-Text
  
  302 - Numerical simulation of realistic Implants and implant prosthesis of molar teeth model by 3D Finite Element Analysis method during chewing cycle
  Shahin Heidari Neda Nasr
  10.71762/kh7j-3n24
• Open Access Article
  • Abstract Page
  • Full-Text
  
  303 - Design and structural analysis of buckling and prestressed modal of an isogrid conical shell under mechanical and thermal loads
  Behrooz Shahriari Mahdi Sharifi Hassan Izanlo
  DOI 10.71939/jsme.2024.1105736
• Open Access Article
  • Abstract Page
  • Full-Text
  
  304 - Simulating And Validating The Pressure Profile During The Filling And Packing Phases of Injection Molding
  Laura Stuart Ma'moun Abu-Ayyad
  https://doi.org/10.60664/jsm.2024.1106606
• Open Access Article
  • Abstract Page
  • Full-Text
  
  305 - Investigating and evaluating the behavior of the proposed connection in the steel bending frame
  Mehri Asgari Mohammadreza Adibramezani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  306 - Multiple Simultaneous Damage Detection in large-span bridges
  محمد وحیدی آرمین عطیمی نژاد مریم فیروزی محمد هریسچیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  307 - Numerical and Experimental Analysis of Temperature Field, Deformation, and Residual Stress in Two-Stage Single-Pulse Sub-Powder Welding Joints
  Hamid Mozafari
  10.71762/dyhz-qx27
• Open Access Article
  • Abstract Page
  • Full-Text
  
  308 - An Improved Non-Overlapping Reluctance Resolver Under Eccentricity Faults
  Davood Karamalian Behrooz Majidi Mohamadreza Moradian Khoshnam Shojaei Sayyed Mohammad Mehdi Mirtalaei
  10.30486/TEEGES.2025.1126568
• Open Access Article
  • Abstract Page
  • Full-Text
  
  309 - Numerical Implementation of A Nonlocal Damage Model For A Stress Regime-Dependent Creep Constitutive Model
  Behzad Dastgerdi Mostafa Baghani
  https://doi.org/10.60664/jsm.2024.1129238
• Open Access Article
  • Abstract Page
  • Full-Text
  
  310 - Numerical simulations of different bearings to obtain the surface tension through the finite element method
  Behrouz Bohlouli Sattar Jedari Salami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  311 - Influence of Process Parameters on Hot Backward Extrusion of Al 6061 alloy
  عصمت Behtari Poor M.M Moshksar رامین Ebrahimi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  312 - Root causes analyzed of leakage on the tank bottom using simulation cathodic protection
  Mohammad Houshmand Ali Davoodi Mehrdad Kashefi Torbati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  313 - Experimental and finite element analysis of hot backward extrusion process of vanadium microalloyed steel preform for determining optimum preheat temperature
  mohammad hoseyn Azarmi mohammad bayat majid belbasi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  314 - Application of the combination of extrusion and equal channel angular pressing for processing fine grained and nanostructured metallic materials
  مهدی شبان غازانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  315 - The finite element analysis of applying the controlling pouer on the surface transformation hardening in the vicinity of discontinuity in the workpiece depth
  A. Khajeh S. A. Jenabali Jahromi H. Danesh Manesh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  316 - The Experimental and Numerical Evaluation of the Residual Stress in the Hot Forming Sheet Process for 5083 Aluminum via the Gas Blowing Process
  H. Fattahi M. Jalali Azizpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  317 - Investigation and Simulation of Quasi-Static Perforation Test on Sandwich Panels with Al A356/SiCp Composite Foam Core
  مسعود Golestanipour ابوالفضل Babakhani S. M Zebarjad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  318 - Cation Distribution, Structural Parameters and Magnetic Moment in the Spinel Structure of Li-Zn Ferrite Prepared by Glycine-Nitrate Process
  S.A. گله داری A. وفایی‌صفت D. آرزومندی H. KH. M. SH
• Open Access Article
  • Abstract Page
  • Full-Text
  
  319 - Investigation of effective parameters in the sandwich and conventional rolling process of the thin steel sheet using the finite element method
  V. Ali mirzaloo
• Open Access Article
  • Abstract Page
  • Full-Text
  
  320 - Determination of the flow field in the phenomenon of falling of sediment particles in near-stagnant water using the two-dimensional Burger equation solution with the fully implicit finite difference method
  Iman Rezaei M. واقفی Hossein Rahideh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  321 - Optimal placement of smart sensors for RCC dams structural health monitoring using Monte- Carlo
  Ali Shamsai Mohsen Ghaemian Hamid Reza Vosoughifar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  322 - Double Round Tube-Form Yielding Damper with Similar Behaviors in Tension and Compression for CBFs Buildings’ Structures
  صاحب پیرانی Heydar Dashti Naserabadi مرتضی جمشیدی Mahmood Hooseini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  323 - Evaluation of Cyclic Behavior of 3-D Steel Frame with infill Plate and Eccentric Brace
  Reza Khalili Ahmad maleki Ramin K. Badri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  324 - Investigating the Effect of Construction Defects on the Performance of Steel Plate Shear Wall Under the Effect of Cyclic Loading
  mohammad memar eftekhari abbas akbarpour nik ghalb rashti مهرزاد تحملی رودسری