Numerical simulation of realistic Implants and implant prosthesis of molar teeth model by 3D Finite Element Analysis method during chewing cycle

Subject Areas :

Shahin Heidari ¹ , Neda Nasr ²

1 -
2 -

Received: 2024-03-02 Accepted : 2024-05-08 Published : 2024-09-19

Keywords: Implants, Implant Prosthesis, Molar Teeth, Finite Element Analysis (FEM), Von Mises analysis, Dental Stress Analysis,

Abstract :

In recent years, dental materials and implantology advancements have significantly improved the field. Precisely, focus has been placed on optimizing implant design, surface characteristics, and the implant-abutment connection. These enhancements aim to achieve better biocompatibility, improved biomechanics, increased bone-implant contact surface area, and enhanced immunological response. This study aimed to investigate the influence of crown dimensions on stress distribution in the abutment screw during loading, utilizing finite element analysis (FEA). A comparative analysis of different dental implants from the same manufacturer was conducted to evaluate their biomechanical properties. The Von Mises analysis provided insights into the biomechanical behavior of these implants. The results indicate that an increase in both horizontal and vertical cantilever lengths can potentially elevate the risk of screw loosening and fatigue fracture. This can be attributed to the heightened stress values observed in the screw or other components, such as the abutment and fixture, respectively. These findings emphasize the importance of considering crown dimensions and their impact on stress distribution during implant design and placement to ensure optimal clinical outcomes and long-term stability.

References:

[1] Arunyanak, S. P., Harris, B. T., Grant, G. T., Morton, D. and Lin, W. S. 2016. Digital approach to planning computer-guided surgery and immediate provisionalization in a partially edentulous patient. Journal of prosthetic dentistry. 116(1):8-14. doi: 10.1016/j.prosdent.2015.11.023.
[2] Dubova, L. V., Shlyk, A. D., Romankova, N. V., Sokolova, M. S. and Maximov, G. V. 2022. Analysis of the condition of the fixing screw for different types of implant and abutment connections. Actual problems in dentistry. 17(4):13-17. doi: 10.18481/2077-7566-21-17-4-13-17.
[3] MousaviJazi, M., Naderan, A., Ebrahimpoor, M. and Sadeghipoor, M. 2013. Association between psychological stress and stimulation of inflammatory responses in periodontal disease. Journal of dentistry. 10(1):103-111.
[4] Patil, P. G. 2011. A Technique for Repairing a Loosening Abutment Screw for a Cement-Retained Implant Prosthesis. Journal of Prosthodontics. 20(8): 652-655. doi: 10.1111/j.1532-849X.2011.00748.
[5] Goodacre, B. J., Goodacre, S. E. and Goodacre, C. J. 2018. Prosthetic complications with implant prostheses. European Journal of Oral Implantology. 11(1): 27-36.
[6] Siamos, G., Winkler, S. and Boberick, K. G. 2002. The relationship between implant preload and screw loosening on implant-supported prostheses. Journal of Oral Implantology. 28(2): 67-73. doi: 10.1563/1548-1336(2002)028<0067:TRBIPA>2.3.CO;2.
[7] Volkmann, H., Rauch, A., Koenig, A. and Schierz, O. 2022. Pull-off Force of Four Different Implant Cements Between Zirconia Crowns and Titanium Implant Abutments in Two Different Abutment Heights. International Journal of Periodontics & Restorative Dentistry, 42(3):67-74. doi: 10.11607/prd.4926.
[8] Calado, G. 2020. Development of methodologies for raman spectral analysis of human saliva for detection of oral cancer. doi: 10.21427/6hty-gf29.
[9] Tahavvor, A. R., Zarrin Chang, P., Abadi Iranagh, S. and Heidari, S. 2017. Numerical simulation of realistic human lumbar spine model under compressive force, axial rotation and lateral bending loads. Modares Mechanical Engineering. 16(11):54-60. dor: 20.1001.1.10275940.1395.16.11.27.0.
[10] Tahavvor, A. R., Zarrinchang, P. and Heidari, S. 2015. Numerical simulation of turbulent airflow in a human upper respiratory system. Modares Mechanical Engineering. 14(15):267-272.
[11] Rastitalab, A., Khajepour, S., Dehghani, J., Afsari, A. and Heidari, S. 2021. Evaluating the Stability of the Fractured Bone Implanted with Titanium Elastic Nails in C and S Configurations. Journal of Hunan University Natural Sciences. 48(9):349-358.
[12] Rastitalab, A., Khajehpour, S., Afsari, A., Heidari, S. and Dehghani, J. 2021. Mechanical stability of RCSed and ECAPed intramedullary 316L stainless steel nails in the treatment of diaphyseal bone fractures. Journal of Modern Processes in Manufacturing and Production. 10(4):37-49. dor: 20.1001.1.27170314.2021.10.4.3.8.
[13] Rastitalab, A., Khajehpour, S., Afsari, A., Heidari, S. and Dehghani, J. 2021. An investigation of using RCS-processed intramedullary stainless steel 316L nail in the treatment of diaphyseal bone fractures. Journal of Modern Processes in Manufacturing and Production. 10(3):59-75. dor: 20.1001.1.27170314.2021.10.3.8.1.
[14] Sudharshan, R. 2012. Comparative evaluation of the microgap of premachined Titanium and Zirconia abutments at the implant-abutment interface before and after cyclic loading: An in Vitro study. Doctoral dissertation. Ragas Dental College & Hospital, Chennai.
[15] Assunção, W. G., Barão, V. A. R., Gomes, É. A., Delben, J. A. and Ribeiro, R. F. 2012. FEA in Dentistry: A Useful Tool to Investigate the Biomechanical Behavior of Implant Supported Prosthesis. Finite Element Analysis: From Biomedical Applications to Industrial Developments. 3:57-80. doi:10.5772/38686.
[16] Pourabbas, B., Emad, J., Dehghani, J., Heidari, S. and Vosoughi, A. R. 2023. Mechanical evaluation of the effect of the rod to rod distance on the stiffness of uniplanar external fixator frames. Musculoskeletal surgery.107(4):1-7. doi:10.1007/s12306-023-00782-1.
[17] Fabris, D., Moura, J. P., Fredel, M. C., Souza, J. C., Silva, F. S. and Henriques, B. 2022. Biomechanical analyses of one‐piece dental implants composed of titanium, zirconia, PEEK, CFR‐PEEK, or GFR‐PEEK: Stresses, strains, and bone remodeling prediction by the finite element method. Journal of Biomedical Materials Research Part B: Applied Biomaterials. 110(1):79-88. doi:10.1002/jbm.b.34890.
[18] Alemayehu, D. B. and Jeng, Y. R. 2021. Three-dimensional finite element investigation into effects of implant thread design and loading rate on stress distribution in dental implants and anisotropic bone. Materials. 14(22):6974-6998. doi: 10.3390/ma14226974.
[19] Kligman, S., Ren, Z., Chung, C. H., Perillo, M. A., Chang, Y. C., Koo, H., Zheng, Z. and Li, C. 2021. The impact of dental implant surface modifications on osseointegration and biofilm formation. Journal of clinical medicine. 10(8):1641. doi:10.3390/jcm10081641.
[20] Tolstunov, L., Hamrick, J. F. E., Broumand, V., Shilo, D. and Rachmiel, A. 2019. Bone augmentation techniques for horizontal and vertical alveolar ridge deficiency in oral implantology. Oral and Maxillofacial Surgery Clinics. 31(2):163-191. doi:10.1016/j.coms.2019.01.005.
[21] Vinhas, A. S., Aroso, C., Salazar, F., López-Jarana, P., Ríos-Santos, J. V. and Herrero- Climent, M. 2020. Review of the mechanical behavior of different implant–abutment connections. International Journal of Environmental Research and Public Health. 17(22):8685-8705. doi: 10.3390/ijerph17228685.
[22] Oyar, P., Durkan, R. and Deste, G. 2021. The effect of the design of a mandibular implant-supported zirconia prosthesis on stress distribution. The Journal of prosthetic dentistry. 125(3): 502.e1-502.e11. doi: 10.1016/j.prosdent.2020.05.027.