Numerical simulation of multilayer cellular scaffolds with 3D and 1D elements

Subject Areas : additive manufacturing

Hamid Reza khanaki ¹ , Sadegh Rahmati ² , Mohammad Nikkhoo ³ , Mohammad Haghpanahi ⁴ , Javad Akbari ⁵

1 - Department of Mechanical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
2 - Department of Mechanical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
3 - Department of Biomedical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
4 - Biomechanics Group, Department of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran
5 - Department of Mechanical Engineering, Sharif University of Technology, Tehran, Iran

Received: 2020-07-07 Accepted : 2020-12-01 Published : 2020-12-01

Keywords:

References:

[1] Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M. and Xie, Y. M., Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: a review, Biomaterials, Vol. 83, No. 5, 2016, pp. 127-141.

[2] Surmeneva, M., Surmenev, R., Chudinova, E., Koptioug, A., Tkachev, M., Gorodzha, S. and Rannar, L. E., Fabrication of multiple-layered gradient cellular metal scaffold via electron beam melting for segmental bone reconstruction, Materials & Design, Vol. 133, No. 5, 2017, pp. 195–204.

[3] Laurencin, C. T., Khan, Y., Ma, P. X. and Elisseeff, J., Polymer/Calcium Phosphate Scaffolds for Bone Tissue Engineering, In: Ma, P. X., Elisseeff, J. (eds) Scaffolding in tissue engineering, 2005, pp. 253–265.

[4] Vaezi, M., Seitz, H., and Yang, S., A review on 3D micro-additive manufacturing technologies, The International Journal of Advanced Manufacturing Technology, Vol. 67, No. 5-8, 2013, pp. 1721–1754.

[5] Ahn, S., Chun, D., and Kim, C., Nanoscale hybrid manufacturing process by nano particle deposition system (NPDS) and focused ion beam (FIB), CIRP Annals-Manufacturing Technology, Vol. 60, No. 1, 2011, pp. 583–586.

[6] Petrochenko, P. E., Torgersen, J., Gruber, P., Hicks, L. A., Zheng, J., Kumar, G., Narayan, RJ., Goering, PL., Liska, R., and Stampfl, J., Laser 3D Printing with Sub-Microscale Resolution of Porous Elastomeric Scaffolds for Supporting Human Bone Stem Cells, Advanced healthcare materials, Vol. 4, No. 5, 2014, pp. 739–747.

[7] Deshpande, V. S., and Fleck, N. A., Collapse of truss core sandwich beams in 3-point bending, International Journal of Solids and Structures, Vol. 38, No. 36-37, 2001, pp. 6275–6305.

[8] Wang, J., Evans, A. G., Dharmasena, K., et al., On the performance of truss panels with Kagome cores, International Journal of Solids and Structures, Vol. 40, No. 25, 2003, pp. 6981–6988.

[9] Kooistra, G. W., Deshpande, V. S., and Wadley, H. N. G., Compressive behavior of age hardenable tetrahedral lattice truss structures made from aluminium, Acta Materialia, Vol. 52, No. 14, 2004, pp. 4229–4237.

[10] Rathbun, H. J., Wei, Z., He, M. Y., et al., Measurement and simulation of the performance of a lightweight metallic sandwich structure with a tetrahedral truss core, Journal Applied Mechanics, Vol. 71, No. 3, 2004, pp. 368–374.

[11] Queheillalt, D. T., and Wadley, H. N. G., Cellular meterial lattices with hollow trusses, Acta Materialia, Vol. 53, No. 2, 2005, pp. 303–313.

[12] Queheillalt, D. T., and Wadley, H. N. G., Pyramidal lattice truss structures with hollow trusses, Materials Science Engineering: A, Vol. 397, No. 1-2, 2005, pp. 132–137.

[13] Gibson, L. J., and Ashby, M. F., Cellular solids: structure and properties. Cambridge university press, 1997.

[14] Luxner, M. H., Woesz, A., Stampfl, J., Fratzl, P., and Pettermann, H. E., A finite element study on the effects of disorder in cellular structures, Acta biomaterialia, Vol. 5, No. 1, 2009, pp. 381–390.

[15] Parthasarathy, J., Starly, B., Raman, S., and Christensen, A., Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM), Journal of the mechanical behavior of biomedical materials, Vol. 3, No. 3, 2010, pp. 249–259.

[16] Hedayati, R., Sadighi, M., Mohammadi-Aghdam, M., and Zadpoor, A. A., Mechanical properties of regular porous biomaterials made from truncated cube repeating unit cells: analytical solutions and computational models, Materials Science and Engineering: C, Vol. 60, 2016, pp. 163–183.

[17] Campoli, G., Borleffs, M., Yavari, S. A., Wauthle, R., Weinans, H., and Zadpoor, A. A., Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing. Materials and Design, Vol. 49, 2013, pp. 957–965.

[18] Babaee, S., Jahromi, B. H., Ajdari, A., Nayeb-Hashemi, H., and Vaziri, A., Mechanical properties of open-cell rhombic dodecahedron cellular structures, Acta Materialia, Vol. 60, No. 6, 2012, pp. 2873-2885.

[19] Borleffs, M., Finite element modeling to predict bulk mechanical properties of 3D printed metal foams, TU Delft, Delft University of Technology, 2012.

[20] Shulmeister, V., Van der Burg, M., Van der Giessen, E., and Marissen, R., A numerical study of large deformations of low-density elastomeric open-cell foams, Mechanics of materials, Vol. 30, No. 2, 1998, pp. 125–140.

[21] Hedayati, R., Hosseini-Toudeshky, H., Sadighi, M., Mohammadi-Aghdam, M., Zadpoor, A. A., Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials, International Journal of Fatigue, Vol. 84, 2016, pp. 67–79.

[22] Hedayati, R., Sadighi, M., Mohammadi-Aghdam, M., and Zadpoor, A. A., Mechanical behavior of additively manufactured porous biomaterials made from truncated cuboctahedron unit cells. International Journal of Mechanical Sciences, Vol. 106, 2016, pp. 19–38.

[23] Warren, W., Kraynik, A., Linear elastic behavior of a low-density Kelvin foam with open cells, Journal of Applied Mechanics, Vol. 64, 1997, pp. 787–794.

[24] Zheng, X., Lee, H., Weisgraber, T. H., Shusteff, M., DeOtte, J., Duoss, E. B., Kuntz, J. D., Biener, M. M., Ge, Q., Jackson, J. A., Ultralight, ultrastiff mechanical metamaterials, Science, Vol. 344, 2014, pp. 1373–1377.

[25] Hedayati, R., Sadighi, M., Mohammadi-Aghdam, M., Zadpoor, A. A., Mechanics ofadditively manufactured porous biomaterials based on the rhombicuboctahedron unit cell, Journal of the Mechanical Behavior of Biomedical Materials, Vol. 53, 2016, pp. 272–294.

[26] Ptochos, E., Labeas, G., Elastic modulus and Poisson’s ratio determination of microlattice cellular structures by analytical, numerical and homogenisation methods, Journal of San- dwich Structures and Materials, Vol. 14, 2012, pp. 597–626.

[27] Ptochos, E., Labeas, G., Shear modulus determination of cuboid metallic open-lattice cellular structures by analytical, numerical and homogenisation methods, Journal of Strain, Vol. 48, 2012, pp. 415–429.

[28] Hedayati, R., Sadighi, M., Mohammadi-Aghdam, M., Zadpoor, A. A., Mechanics ofadditively manufactured porous biomaterials based on the rhombicuboctahedron unit cell, Journal of the Mechanical Behavior of Biomedical Materials, Vol. 53, 2016, pp. 272–294.

[29] Ptochos, E., Labeas, G., Elastic modulus and Poisson’s ratio determination of microlattice cellular structures by analytical, numerical and homogenisation methods, Journal of San- dwich Structures and Materials, Vol. 14, 2012, pp. 597–626.

[30] Ptochos, E., Labeas, G., Shear modulus determination of cuboid metallic open-lattice cellular structures by analytical, numerical and homogenisation methods, Journal of Strain, Vol. 48, 2012, pp. 415–429.

[31] Ahmadi, S., Campoli, G., Amin Yavari, S., Sajadi, B., Wauthl´e, R., Schrooten, J., Weinans, H., Zadpoor, A. A., Mechanical behavior of regular open-cell porous biomaterials made of diamond lattice unit cells, Journal of the Mechanical Behavior of Biomedical Materials, Vol. 34, 2014, pp. 106–115.

[32] Hedayati, R., Sadighi, M., Mohammadi-Aghdam, M., Zadpoor, A. A., Effect of massmultiple counting on the elastic properties of opencell regular porous biomaterials, Materials and Design, Vol. 89, 2016, pp. 9–20.

[33] Bitsche, R., Daxner, T., B¨ohm, H. J., Space-Filling Polyhedra as Mechanical Models for Solidified Dry Foams. Technische Universit¨at Wien, 2005.

[34] Buffel, B., Desplentere, F., Bracke, K., Verpoest, I., Modelling open cell-foams based on the Weaire-Phelan unit cell with a minimal surface energy approach, International Journal of Solids and Structures, Vol. 51, 2014, pp. 3461-3470.

[35] Kraynik, A. M., Reinelt, D. A., Linear elastic behavior of dry soap foams, Journal of Colloid and interface Science, Vol. 181, 1996, pp. 511-520.

[36] Feng, Y. F., Wang, L., Li, X., Ma, Z. S., Zhang, Y., Zhang, Z. Y., and Lei, W., Influence of architecture of β-tricalcium phosphate scaffolds on biological performance in repairing segmental bone defects, PLoS One, Vol. 7, No. 11, 2012, e49955.

[37] Das, A., and Botchwey, E., Evaluation of angiogenesis and osteogenesis, Tissue Engineering Part B: Reviews, Vol. 17, No. 6, 2011, pp. 403-414.

[38] Gérard, C., and Doillon, C. J., Facilitating tissue infiltration and angiogenesis in a tubular collagen scaffold, Journal of biomedical materials research Part A, Vol. 93, No. 2, 2010, pp. 615-624.

[39] Surmeneva, M., Surmenev, R., Chudinova, E., Koptioug, A., Tkachev, M., Gorodzha, S., Rannar, L. E., Fabrication of multiple-layered gradient cellular metal scaffold via electron beam melting for segmental bone reconstruction, Materials & Design, 2017; DOI: 10.1016/ j.matdes. 2017.07.059.

[40] Khanaki, H. R., Rahmati, S., Nikkhoo, M., Haghpanahi, M., and Akbari, J., Numerical and analytical simulation of multilayer cellular scaffolds, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 42, No. 268, 2020, pp. 1-13.

[41] Fundamental FEA Concepts and Applications (no data) (https://www.cae.tntech.edu/~chriswilson/FEA/ANSYS/ANSYSguide_fea-concepts.pdf)

[42] Bandyopadhyay, A., Espana, F., Balla, V. K., Bose, S., Ohgami, Y., and Davies, N. M., Influence of porosity on mechanical properties and in vivo response of Ti6Al4V implants, Acta Biomaterialia, Vol. 6, 2010, pp. 1640-1648

[43] Khanaki, H. R., Rahmati, S., Nikkhoo, M., Haghpanahi, M., and Akbari, J., Numerical Simulation of Homogeneous, Two and Three Lattice Layers Scaffolds with Constant Density, Journal of Modern Processes in Manufacturing and Production, Vol. 9, No. 2, 2020, pp. 5-22.