A Cohesive Zone Model for Crack Growth Simulation in AISI 304 Steel

Subject Areas : Engineering

F  Javidrad ¹ (Center for Postgraduate Studies, Aeronautical University of Science and Technology, Tehran)
M  Mashayekhy ² (Center for Postgraduate Studies, Aeronautical University of Science and Technology, Tehran)

Received: 2014-07-15 Accepted : 2014-09-20 Published : 2014-12-30

Keywords:

References:

[1] Kim J., Gao X., Srivatsan T.S., 2003, Modeling of crack growth in ductile solids: a three-dimensional analysis, International Journal of Solids and Structures 40(26): 7357-7374.
[2] Wei Z., Deng X., Sutton M.A., Yang J., Cheng C. S., Zavattieri P., 2011, Modeling of mixed-mode crack growth in ductile thin sheets under combined in-plane and out-of-plane loading, Engineering Fracture Mechanics 78(17): 3082-3101.
[3] Zhu X.K., Joyce J.A., 2012, Review of fracture toughness (G, K, J, CTOD, CTOA) testing and standardization, Engineering Fracture Mechanics 85(1): 1-46.
[4] Pirondi A., Fersini D., 2009, Simulation of ductile crack growth in thin panels using the crack tip opening angle, Engineering Fracture Mechanics 76(1): 88-100.
[5] Li H., Fu M.W., Lu J., Yang H., 2011, Ductile fracture: experiments and computations, International Journal of Plasticity 27( 2): 147-180.
[6] Jackiewicz J., Kuna M., 2003, Non-local reqularization for FE simulation of damage in ductile materials, Computational Materials Science 28(3-4): 784-695.
[7] Barenblatt G.I., 1959, Equilibrium cracks formed during brittle fracture, Journal of Applied Mathematics and Mechanics 23: 1273-1282.
[8] Dugdale D.S., 1960, Yielding of steel sheets containing slits, Journal of the Mechanics and Physics of Solids 8: 100-104.
[9] Rahulkumar P., Jagota A., Bennison S.J., Saigal S., 2000, Cohesive element modeling of viscoelastic fracture: application to peel testing of polymers, International Journal of Solids and Structures 37: 1873-1897.
[10] Siegmund T., Brocks W., 2000, A numerical study on the correlation between the work of separation and the dissipation rate in ductile fracture, Engineering Fracture Mechanics 67: 139-154.
[11] Camacho G.T., Ortiz, M., 1996, Computational modeling of impact damage in brittle materials, International Journal of Solids and Structures 33: 2899-2938.
[12] Mohammed I., Liechti K.M., 2000, Cohesive zone modeling of crack nucleation at bimaterial corners, Journal of the Mechanics and Physics of Solids 48: 735-764.
[13] Roesler J., Paulino G.H., Park K., Gaedicke C., 2007, Concrete fracture prediction using bilinear softening, Cement and Concrete Composites 29: 300-312.
[14] Shim D. J., Paulino G.H., Dodds Jr. R.H., 2006, J resistance behavior in functionally graded materials using cohesive zone and modified boundary layer models, International Journal of Fracture 13: 91-117.
[15] Aronsson C.G., Backlund J., 1986, Tensile fracture of laminates with cracks, Journal of Composite Materials 20: 287-307.
[16] Espinosa H.D., Dwivedi S., Lu H.C., 2000, Modeling impact induced delamination of woven fiber reinforced composites with contact/cohesive laws, Computer Methods in Applied Mechanics and Engineering 183: 259-290.
[17] Song S.J., Wass A.M., 1995, Energy-based mechanical model for mixed-mode failure of laminated composites, AIAA Journal 33: 739-745.
[18] Kubair D.V., Geubelle P.H., Huang Y.Y., 2003, Analysis of rate –dependent cohesive model for dynamic crack propagation, Engineering Fracture Mechanics 70: 685-704.
[19] Liong R. T., 2011, Application of the Cohesive Zone Model to the Analysis of Rotors with a Transverse Crack, Karlsruher Institut Fur Technologie, KIT Scientific Publishing, Karlsruhe, Germany.
[20] Wang J.T., 2010, Relating Cohesive Zone Models to Linear Elastic Fracture Mechanics, NASA/TM-2010-216692, National Aeronautics and Space Administration, USA.
[21] Scheider I., Brocks W., 2003, Simulation of cup-cone fracture using the cohesive model, Engineering Fracture Mechanics 70: 1943-1961.
[22] Cornec A., Schonfeld W., Schwalbe K. H., Scheider I., 2009, Application of the cohesive model for predicting the residual strength of a large scale fuselage structure with a two-bay crack, Engineering Failure Analysis 16: 2541-2558.
[23] Li W., Siegmund T., 2002, An analysis of crack growth in thin-sheet metal via a cohesive zone model, Engineering Fracture Mechanics 69: 2073-2093.
[24] Chen J., Fox D., 2012, Numerical investigation into multi-delamination failure of composite t-piece specimens under mixed-mode loading using a modified cohesive zone model, Composite Structures 94(6): 2010-2016.
[25] Tvergaard V., Needleman A., 1984, Analysis of the cup-cone fracture in a round tensile bar, Acta Metallurgica 32: 157-169.
[26] Needleman A., Tvergaard V., 1984, An analysis of ductile rupture in notched bars, Journal of the Mechanics and Physics of Solids 32: 461-490.
[27] Li H., Chandra N., 2003, Analysis of crack growth and crack-tip plasticity in ductile materials using cohesive zone models, International Journal of Plasticity 19: 849-882.
[28] Tvergaard V., 2001, Crack growth predictions by cohesive zone model for ductile fracture, Journal of the Mechanics and Physics of Solids 49: 2191-2207.
[29] Geubelle P.H., Baylor J., 1998, Impact-induced delamination of laminated composites: a 2D simulation, Composites 29: 589-602.
[30] Fernandes R.M.R.P., Chousal J.A.G., De Moura M.F.S.F., Xavier J., 2013, Determination of the cohesive laws of composite bonded joints under mode-II loading, Composites Part B: Engineering 52: 269-274.
[31] Dourado N., Pereira F.A.M., De Moura M.F.S.F., Morais J.J.L., Dias M.I.R., 2013, Bone fracture characterization using the end notched flexure tests, Materials Science and Engineerin C 33(1): 405-410.
[32] Zou Z., Reid S.R., Li S., 2003, A continuum damage model for delamination in laminated composites, Journal of the Mechanics and Physics of Solids 51(2): 333-356.
[33] Xu X. P., Needleman A., 1993, Void nucleation by inclusion debonding in a crystal matrix, Modeing and Simulation in Materials Science and Engineering 1: 111-132.
[34] Hsu C. L., Lo J., Yu J., Lee X. G., Tan P., 2003, Residual strength analysis using CTOA criteria for fuselage structures containing multiple site damage, Engineering Fracture Mechanics 70: 525-545.
[35] James M.A., Newman Jr. J.C., 2003, The effect of crack tunneling on crack growth: experiments and CTOA analysis, Engineering Fracture Mechanics 70: 457-468.
[36] Anandarajah A., 2010, Computational Methods in Elasticity and Plasticity: Solids and Porous Media, Springer Science International.