Numerical Simulation of Ultrasonic Assisted Indentation Tube Forming

Subject Areas : traditional and nontraditional manufacturing

Saeid Dashti ¹ , Masih Paknejad ² , Amir Abdullah ³ , Abbas Pak ⁴

1 - Department of Mechanical Engineering, Amirkabir University of Technology, Tehran, Iran
2 - Department of Mechanical Engineering, Amirkabir University of Technology, Tehran, Iran
3 - Department of Mechanical Engineering, Amirkabir University of Technology, Tehran, Iran
4 - Department of Mechanical Engineering, Bu-Ali Sina University, Hamedan, Iran

Received: 2019-05-30 Accepted : 2020-10-04 Published : 2020-09-01

Keywords:

References:

[1]     Garskii, F. K., Efromov, V. I., Effect of Ultrasound on the Decomposition of Solid Solutions, Izv. Akad. Nauk, Beloroussk SSR, Vol. 3, 1953.

[2]     Blaha, F., Langenecker, B., Dehnung Von Zink-Kristallen Unter Ultraschalleinwirkung, Naturwissenschaften, Vol. 42, 1955, pp. 556.

[3]     Siddiq, A., El Sayed, T., Ultrasonic-Assisted Manufacturing Processes: Variational Model and Numerical Simulations, Ultrasonics, Vol. 52, No. 4, 2012, pp. 521-9. DOI: 10.1016/j.ultras.2011.11.004.

[4]     Murakawa, M., Jin, M., The Utility of Radially and Ultrasonically Vibrated Dies in the Wire Drawing Process, Journal of Materials Processing Technology, Vol. ‎‎113, No. 1-3, 2001, pp. 81-86. DOI: 10.1016/S0924-0136(01)00635-5.

[5]     Murakawa, M., Jin, M., and Hayashi, M., Study on Semi Dry Wire Drawing Using Dlc Coated Dies, Surface and Coatings Technology, Vol. 177 –178, 2004, pp. 631–37. DOI: 10.1016/j.surfcoat.2003.08.057.

[6]     Huang, Z., Lucas, M., and Adams, M. J., Influence of Ultrasonics on Upsetting of a Model Paste, Ultrasonics, Vol. 40, No. 1-4,  2002, pp. 43–48. DOI: 10.1016/S0041-624X(02)00245-7.

[7]     Hayashi, M., Jin, M., and Thipprakmas, S., et al., Simulation of Ultrasonic-Vibration Drawing Using the Finite Element Method (Fem), Journal of Materials Processing Technology, Vol. 140, No. 1-3, 2003, pp. 30-35. DOI: 10.1016/s0924-0136(03)00699-x.

[8]     Mousavi, S., Akbari, A. A., Feizi, H., and Madoliat, R., Investigations on the Effects of Ultrasonic Vibrations in the Extrusion Process, Journal of Materials Processing Technology, Vol. 187-188, 2007, pp. 657-61. DOI: 10.1016/j.jmatprotec.2006.11.168.

[9]     Hung, J. C., Chiang, M. C., The Influence of Ultrasonic-Vibration on Double Backward-Extrusion of Aluminum Alloy, Proceedings of the World Congress on Engineering; WCE, London, U.K. 2009.

[10]  Pazand, K., Feizi, H., Using Artificial Neural Networks in Investigations on the Effects of Ultrasonic Vibrations on the Extrusion Process, Applied Mechanics and Materials, Vol. 52-54, 2011, pp. 103-08. DOI: 10.4028/www.scientific.net/AMM.52-54.103.

[11]  Abdullah, A., Paknejad, M., Dashti, S., Pak, A., and Beigi, A. M., Theoretical and Experimental Analyses of Ultrasonic-Assisted Indentation Forming of Tube, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 228, 2013, pp. 388-98. DOI: 10.1177/0954405413501502.

[12]  Simulia, D. S., Abaqus 6.13 User’s Manual, Dassault Systems, Providence, 2013.

[13]  Hensel, A., Poluchin, P. I., Poluchin, and W. P., Technologie Der Metallformung: Wiley, 1991.

[14]  Bruni, C., Forcellese, A., Gabrielli, F., Simoncini, M., and Montelatici, L., Evaluation of Friction Coefficient in Tube Drawing Processes, American Institute of Physics, Vol. 907, 2007, pp. 552-57. DOI: 10.1063/1.2729571.

[15]  Siegert, K., Ulmer, J., Superimposing Ultrasonic Waves on the Dies in Tube and Wire Drawing, Journal of Engineering Materials and Technology, Vol. 123, No. 4, 2001, pp. 517. DOI: 10.1115/1.1397779.

[16]  Paknejad, M., Abdullah, A., and Azarhoushang, B., Effects of High Power Ultrasonic Vibration on Temperature Distribution of Workpiece in Dry Creep Feed up Grinding, Ultrasonics Sonochemistry, Vol. 39, 2017, pp. 392-402. DOI: https://doi.org/10.1016/j.ultsonch.2017.04.029.