A New Eight Nodes Brick Finite Element Based on the Strain Approach

Subject Areas : Engineering

Kh Guerraiche ¹ (Department of Mechanical Engineering, Djelfa University, Batna, Algeria)
L Belounar ² (NMISSI Laboratory, Biskra University, Biskra, Algeria)
L Bouzidi ³ (NMISSI Laboratory, Biskra University, Biskra, Algeria)

Received: 2017-12-09 Accepted : 2018-02-08 Published : 2018-03-01

Keywords:

References:

[1] Ait-Ali L., 1984, Développement d’ Eléments Finis de Coque Pour le Calcul des Ouvrages d’Art, Thèse de Doctorat, Ecole Nationale Des Ponts Chaussées Paris Tech.

[2] Ashwell D.G., Sabir A.B., Roberts T.M., 1971, Further studies in the application of curved finite elements to circular arches, International Journal of Mechanical Sciences 13(6): 507-517.

[3] Ayad R., Batoz J.L., Dhatt G., 1995, Un élément quadrilatéral de plaque basé sur une formulation mixte-hybride avec projection en cisaillement, Revue Européenne des Eléments Finis 4(4): 415-440.

[4] Bassayya K., Shrinivasa U., 2000, A 14-node brick element, PN5X1, for plates and shells, Computers & Structures 74(2): 176 -178.

[5] Bassayya k., Bahattacharya K., Shrinivasa U., 2000, Eight –Node brick, PN340, represents constant stress fields exactly, Computers & Structures 74(4): 441-460.

[6] Bathe K.J., Dvorkin E.N., 1985, A four‐node plate bending element based on Mindlin/Reissner plate theory and a mixed interpolation‏, International Journal for Numerical Methods in Engineering 21(2): 367-383.

[7] Belarbi M.T., Charif A., 1998, Nouvel élément secteur basé sur le modèle de déformation avec rotation Dans le plan, Revue Européenne des Eléments Finis 7(4): 439-458.

[8] Belarbi M.T., Charif A., 1999, Développement d'un nouvel élément hexaédrique simple basé sur le modèle en déformation pour l'étude des plaques minces et épaisses, Revue Européenne des Eléments Finis 8(2): 135-157.

[9] Belarbi M.T., Maalem T., 2005, On improved rectangular finite element for plane linear elasticity analysis, Revue Européenne des Elements Finis 14(8): 985-997.

[10] Belarbi M.T., Bourezane M., 2005, On improved Sabir triangular element with drilling rotation, Revue Européenne de Génie Civil 9(9-10): 1151-117.

[11] Belounar L., Guenfoud M., 2005, A new rectangular finite element based on the strain approach for plate bending, Thin-Walled Structures 43(1): 47-63.

[12] Belounar L., Guerraiche K., 2014, Anew strain based brick element for plate bending, Alexandria Engineering Journal 53(1): 95-105.

[13] Bull J.W., 1984, The Strain approach to the development of thin cylindrical shell finite element, Thin-Walled Structures 2(3): 195-205.

[14] Charhabi A., 1990, Calcul des Plaques Minces et Epaisses à L'aide des Eléments Finis Tridimensionnels, Annales de l'ITBTP.

[15] Chen Y.I., Wu G.Y., 2004, A mixed 8-node hexahedral element based on the Hu-Washizu principle and the field extrapolation technique, Structural Engineering and Mechanics 17(1): 113-140.

[16] Djoudi M.S., Bahai H., 2003, A shallow shell finite element for the linear and non-linear analysis of cylindrical shells, Engineering Structures 25(6): 769-778.

[17] De Rosa M.A., Franciosi C., 1990, Plate bending analysis by the cell method: numerical comparisons with finite element methods, Computers & Structures 37(5): 731-735.

[18] Djoudi M. S., Bahai H., 2004, Strain based finite element for the vibration of cylindrical panels with opening, Thin-Walled Structures 42(4): 575-588.

[19] Fredriksson M., Ottosen N.S., 2007, Accurate eight-node hexahedral element, International Journal for Numerical Methods and Engineering 72(6): 631-657.

[20] Gallagher R.H., 1976, Introduction aux Eléments Finis, Edition Pluralise.

[21] Himeur M., Guenfoud M., 2011, Bending triangular finite element with a fictitious fourth node based on the strain approach, European Journal of Computational Mechanics 20(7-8): 455-485.

[22] Himeur M., Benmarce A., Guenfoud M., 2014, A new finite element based on the strain approach with transverse shear effect, Structural Engineering and Mechanics 49(6): 793-810.

[23] Himeur M., Zergua A., Guenfoud M., 2015, A Finite Element Based on the Strain Approach Using Airy’s Function, Arabian Journal for Science and Engineering 40(3): 719-733.

[24] Hamadi D., Ayoub A., Toufik M., 2016, A new strain-based finite element for plane elasticity problems, Engineering Computations 33(2): 562-579.

[25] Jirousek J., Wroblewski A., Qin Q., He X., 1995, A family of quadrilateral hybrid –Trefftz p-elements for thick plate analysis, Computer Methods in Applied Mechanics Engineering 127(1-4): 315-344.

[26] Lemosse D., 2000, Eléments Finis Isoparamétriques Tridimensionnels Pour L’étude des Structures Minces, Thèse de Doctorat, Ecole Doctorale SPMI/INSA-Rouen.

[27] Li H.G., Cen S., Cen Z.Z., 2008, Hexahedral volume coordinate method (HVCM) and improvements on 3D Wilson hexahedral element, Computer Methods in Applied Mechanics and Engineering 197(51-52): 4531-4548.

[28] Lo S.H., Ling C., 2000, Improvement on the 10-node tetrahedral element for three-dimensional problems, Computer Methods in Applied Mechanics and Engineering 189(3): 961-974.

[29] MacNeal R.H., Harder R. L., 1985, A Proposed Standard Set of Problems to Test Finite Element Accuracy, Finite Element in Analysis and Design 1(1): 3-20.

[30] Mindlin R.D., 1951, Influence of rotary inertia and shear on flexural motions of isotropic elastic plates, Journal of Applied Mechanics 18: 31-38.

[31] Ooi E.T., Rajendran S., Yeo J.H., 2004, A 20-node hexahedron element with enhanced distortion tolerance, International Journal for Numerical Methods in Engineering 60(15): 2501-2530.

[32] Reissner E., 1945, The effect of transverse shear deformation on the bending of elastic plates, Journal of Applied Mechanics ASME 12: 69-77.

[33] Sabir A.B., Lock A.C.,1972, Curved Cylindrical Shell Finite element, International Journal of Mechanical Sciences 14(2): 125-135.

[34] Sabir A.B., 1983, A new class of finite elements for plane elasticity problems, CAFEM7, 7th International Conference on Structural Mechanics in Reactor Technology, Chicago.

[35] Sabir A.B., Sfendji A., 1995, Triangular and rectangular plane elasticity finite elements, Thin-Walled Structures 21(3): 225-232.

[36] Sabir A.B., Moussa A.I., 1997, Analysis of fluted conical shell roofs using the finite element method, Computers & Structures 64(1-4): 239-251.

[37] Smith I.M., Griffith D.V., 1988, Programming the Finite Element Method, John Wiley & Sons, UK.

[38] Smith I.M., Griffith D.V., 2004, Programming the Finite Element Method, John Wiley & Sons, UK.

[39] Sze K.Y., Chan W.K., 2001, A six-node pentagonal assumed natural strain solid-shell element, Finite Elements in Analysis and Design 37(8): 639-655.

[40] Timoshenko S., Woinowsky-Krieger S., 1959, Theory of Plates and Shells, London, McGraw-Hill.

[41] Timoshenko S., Goodier J. N., 1951, Theory of Elasticity, McGraw-Hill.

[42] Trinh V.D., 2009, Formulation, Développement et Validation d’Eléments Finis de Type Coques Volumiques Sous Intégrés Stabilisés Utilisables Pour des Problèmes a Cinématique et Comportement Non Linéaires, Thèse de Doctorat, Ecole Doctorale, ENSAM-Paris.

[43] Trinh V.D., Abed-Meraim F., A. Combescure, 2011, Assumed strain solid–shell formulation “SHB6” for the six-node prismatic, Journal of Mechanical Science and Technology 25(9): 2345-2364.

[44] Venkatesh D.N., Shrinivasa U., 1996, Plate bending with hexahedral with PN elements, Computers & Structures 60(4): 635-641.

[45] Yuan F., Miller R.E., 1988, A rectangular finite element for moderately thick flat plates, Computers & Structures 30(6): 1375-1387.

[46] Zienkiewicz O.C., Taylor R.L., 1977, The Finite Element Method, McGraw-Hill.

[47] Zienkiewicz O.C., Taylor R.L., 1989, The Finite Element Method, McGraw–Hill.

[48] Zienkiewicz O.C., Taylor R.L., 2000, The Finite Element Method, Butterworth-Heinemann.