Studying the Mechanical and Thermal Properties of Polymer Nanocomposites Reinforced with Montmorillonite Nanoparticles Using Micromechanics Method

Subject Areas : Engineering

M.H Yas ¹ , H Shahrani Korani ² , F Zare Jouneghani ³

1 - Department of Mechanical Engineering, Razi University, Kermanshah, Iran
2 - Department of Mechanical Engineering, Razi University, Kermanshah, Iran
3 - Young Researchers and Elite Club, Shahrekord Branch, Islamic Azad University, Shahrekord, Iran

Received: 2019-09-28 Accepted : 2019-12-14 Published : 2020-03-01

Keywords:

References:

[1] Fornes T., Paul D., 2003, Modeling properties of nylon 6/clay nanocomposites using composite theories, Polymer 44(17): 4993-5013.
[2] Karamane M., Raihane M., Tasdelen M.A., Uyar T., Lahcini M., Ilsouk M., 2017, Preparation of fluorinated methacrylate/clay nanocomposite via in‐situ polymerization: Characterization, structure, and properties, Journal of Polymer Science Part A: Polymer Chemistry 55(3): 411-418.
[3] Mahmood W.A.K., Azarian M.H., Fathilah W., Kwok E., 2017, Nanoencapsulation of montmorillonite clay within poly (ethylene glycol) nanobeads by electrospraying, Journal of Applied Polymer Science 134(28): 45048.
[4] Paliwal B., Lawrimore W.B., Chandler M.Q., Horstemeyer M.F., 2017, Nanomechanical modeling of interfaces of polyvinyl alcohol (PVA)/clay nanocomposite, Philosophical Magazine 97(15): 1179-1208.
[5] Zeng Q., Yu A., Lu G., 2008, Multiscale modeling and simulation of polymer nanocomposites, Progress in Polymer Science 33(2): 191-269.
[6] Zeng Q.H., Yu A.B., Lu G.Q., Paul D.R., 2005, Clay-based polymer nanocomposites: research and commercial development, Journal of Nanoscience and Nanotechnology 5(10): 1574-1592.
[7] Raja S.N., Olson A.C., Limaye A., Thorkelsson K., Luong A., Lin L., 2015, Influence of three-dimensional nanoparticle branching on the Young’s modulus of nanocomposites: Effect of interface orientation, Proceedings of the National Academy of Sciences 112(21): 6533-6538.
[8] Wang Z., Lv Q., Chen S., Li C., Sun S., Hu S., 2016, Effect of interfacial bonding on interphase properties in SiO2/epoxy nanocomposite: A molecular dynamics simulation study, ACS Applied Materials & Interfaces 8(11): 7499-7508.
[9] Han Y., Elliott J., 2007, Molecular dynamics simulations of the elastic properties of polymer/carbon nanotube composites, Computational Materials Science 39(2): 315-323.
[10] Yang S., Yu S., Kyoung W., Han D-S., Cho M., 2012, Multiscale modeling of size-dependent elastic properties of carbon nanotube/polymer nanocomposites with interfacial imperfections, Polymer 53(2):623-633.
[11] Zhu H.,1996, Sintering processes of two nanoparticles: a study by molecular dynamics simulations, Philosophical Magazine Letters 73(1): 27-33.
[12] Smith J.S., Bedrov D., Smith G.D., 2003, A molecular dynamics simulation study of nanoparticle interactions in a model polymer-nanoparticle composite, Composites Science and Technology 63(11): 1599-1605.
[13] Naicker P.K., Cummings P.T., Zhang H., Banfield J.F., 2005, Characterization of titanium dioxide nanoparticles using molecular dynamics simulations, The Journal of Physical Chemistry B 109(32): 15243-15249.
[14] Hooper J.B., Schweizer K.S., 2006, Theory of phase separation in polymer nanocomposites, Macromolecules 39(15): 5133-5142.
[15] Ghosh A., Mandal P., Karmakar S., Ghosh A., 2013, Analytical theory and stability analysis of an elongated nanoscale object under external torque, Physical Chemistry Chemical Physics 15(26): 10817-10823.
[16] Valavala P., Odegard G., 2005, Modeling techniques for determination of mechanical properties of polymer nanocomposites, Reviews on Advanced Materials Science 9: 34-44.
[17] Yu S., Yang S., Cho M., 2009, Multi-scale modeling of cross-linked epoxy nanocomposites, Polymer 50(3): 945-952.
[18] Sheng N., Boyce M.C., Parks D.M., Rutledge G., Abes J., Cohen R., 2004, Multiscale micromechanical modeling of polymer/clay nanocomposites and the effective clay particle, Polymer 45(2): 487-506.
[19] Spanos P., Kontsos A., 2008, A multiscale Monte Carlo finite element method for determining mechanical properties of polymer nanocomposites, Probabilistic Engineering Mechanics 23(4): 456-470.
[20] Buryachenko V., Roy A., Lafdi K., Anderson K.L., Chellapilla S., 2005, Multi-scale mechanics of nanocomposites including interface: experimental and numerical investigation, Composites Science and Technology 65(15): 2435-2465.
[21] Mohammadpour E., Awang M., Kakooei S., Akil H.M., 2014, Modeling the tensile stress–strain response of carbon nanotube/polypropylene nanocomposites using nonlinear representative volume element, Materials & Design 58: 36-42.
[22] Shahzamanian M., Tadepalli T., Rajendran A., Hodo W.D., Mohan R., Valisetty R., 2014, Representative volume element based modeling of cementitious materials, Journal of Engineering Materials and Technology 136(1): 011007.
[23] Ali D., Sen S., 2016, Finite element analysis of the effect of boron nitride nanotubes in beta tricalcium phosphate and hydroxyapatite elastic modulus using the RVE model, Composites Part B: Engineering 90: 336-340.
[24] Bravo-Castillero J., Rodrigues-Ramos R., Houari M., Otero J., 2009, Homogenization and effective properties of periodic thermo magneto electro elastic composites, Journal of Materials and Structures 4(5): 819-836.
[25] Lezgy-Nazargah M., Eskandari-Nadaf H., 2018, Effective coupled thermo-electro-mechanical properties of piezoelectric structural fiber composites: A micromechanical approach, Journal of Intelligent Material Systems and Structures 29(4): 496-513.
[26] Lezgy-Nazargah M., 2015, A micromechanics model for effective coupled thermo-electro-elastic properties of Macro Fiber Composites, Journal of Mechanics 31(2):183-199.
[27] Huang J., Uhrig M., Weber U., Schmauder S., 2015, Numerical simulation of mechanical properties of nano particle modified polyamide 6 via RVE modeling, Journal of Materials Science and Chemical Engineering 3(01): 95-102.
[28] Yas M.H., Karami Khorramabadi M., 2017, Preparation with modeling and theoretical predictions of mechanical properties of functionally graded polyethylene/clay nanocomposites, Journal of Theoretical and Applied Mechanics 55(2): 583-593.
[29] Shojaie M., Golestanian H., 2011, Effects of interface characteristics on mechanical properties of carbon nanotube reinforced polymer composites, Materials Science and Technology 27(5): 916-922.
[30] Holland J.H., 1992, Adaptation in Natural and Artificial Systems: An Introductory Analysis with Applications to Biology, Control, and Artificial Intelligence, MIT Press.
[31] Bashorov M., Kozlov G., Zaikov G., Mikitaev A., 2009, Polymers as natural nanocomposites, The Comparative Analysis of Reinforcement Mechanisms 3(3): 183-185.
[32] Zare Y., Rhee K.Y., Hui D., 2017, Influences of nanoparticles aggregation/agglomeration on the interfacial/interphase and tensile properties of nanocomposites, Composites Part B: Engineering 122:41-46.
[33] Paul B., 1959, Prediction of Elastic Constants of Multi-Phase Materials, Brown University Providence.