Influences of Blank Holder Force in The Multi-Step Deep Drawing Process of Aluminum Sheets

Subject Areas : metal forming

Sajad Bakhtiari ¹ , Seyed Jalal Hashemi ² , Amir Hossein Roohi ³

1 - Department of Mechanical Engineering, Shahid Rajaee Teacher Training University, Tehran, Iran
2 - Department of Mechanical Engineering, Faculty of Enghelab-e Eslami, Tehran Branch, Technical and Vocational University (TVU), Tehran, Iran
3 - Department of Mechanical Engineering, Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran

Received: 2019-10-05 Accepted : 2019-12-23 Published : 2020-09-01

Keywords:

References:

[1]     Koc, M., Altan, T., An Overall Review of the Tube Hydroforming (THF) Technology, Journal of Materials Processing Technology, Vol. 108, No. 3, 2001, pp. 384-393.

[2]     Colgan, M., Monaghan, J., Deep Drawing Process: Analysis and Experiment, Journal of Materials Processing Technology, Vol 132, No. 1-3, 2003, pp. 35-41.

[3]     Vollertsen, F., Prange, T., and Sander, M., Hydroforming: Needs, Developments and Perspectives, Advanced Technology of Plasticity, Vol. 2, No. 1, 1999, pp. 1197-1209.

[4]     Hashemi, S. J., Naeini, H. M., Liaghat, G., Karami, J. S., and Roohi, A. H., Prediction of Bursting in Warm Tube Hydroforming using Modified Ductile Fracture Criteria, Modares Mechanical Engineering, Vol. 14, No. 16, 2015, pp. 201-211.

[5]     Choi, T., Choi, S., Na, K., and Bae, H., Chung W, Application of Intelligent Design Support System for Multi-Step Deep Drawing Process, Journal of Materials Processing Technology, Vol. 130, No. 1, 2002, pp. 76-88.

[6]     Sheng, Z., Taylor, R., and Strazzanti, M., FEM-Based Progressive Drawing Process Design, The International Journal of Advanced Manufacturing Technology, Vol. 36, No. 3-4, 2008, pp. 226-36.

[7]     Li, W., Meng, B., Wang, C., Wan, M., and Xu, L., Effect of Pre-Forming and Pressure Path On Deformation Behavior in Multi-Pass Hydrodynamic Deep Drawing Process, International Journal of Mechanical Sciences, Vol. 121, No. 1, 2017, pp. 171-180.

[8]     Sivasankaran, S., Narayanasamy, R., Jeyapaul, R., and Loganathan, C., Modelling of Wrinkling in Deep Drawing of Different Grades of Annealed Commercially Pure Aluminium Sheets When Drawn Through a Conical Die Using Artificial Neural Network, Materials & Design, Vol. 30, No. 8, 2009, pp. 3193-3205.

[9]     Tikhovskiy, I., Raabe, D., and Roters, F., Simulation of Earing During Deep Drawing of an Al–3% Mg Alloy (AA 5754) Using a Texture Component Crystal Plasticity FEM, Journal of Materials Processing Technology, Vol. 183, No. 2-3, 2007, pp. 169-175.

[10]  Liu, W., Chen, B. K., Sheet Metal Anisotropy and Optimal Non-Round Blank Design in High-Speed Multi-Step Forming of AA3104-H19 Aluminium Alloy Can Body, The International Journal of Advanced Manufacturing Technology, Vol. 95, No. 9-12, 2018, pp. 4265-4277.

[11]  Qayyum, F., Shah, M., Muqeet, A., and Afzal, J., The Effect of Anisotropy On the Intermediate and Final Form in Deep Drawing of Ss304l, With High Draw Ratios: Experimentation and Numerical Simulation, IOP Conference Series: Materials Science and Engineering, Vol. 146, No. 1, 2016, pp. 012031

[12]  Proubet, J., Baudelet, B., Rupture Criteria During Deep Drawing of Aluminum Alloys, Studies in Applied Mechanics, Vol. 45, No. 1, 1997, pp. 289-297.

[13]  Zhang, W., Tor, S., and Britton, G., Indexing and Retrieval in Case-Based Process Planning for Multi-Stage Non-Axisymmetric Deep Drawing, The International Journal of Advanced Manufacturing Technology, Vol. 28, No. 1-2, 2006, pp. 12-22.

[14]  Abdelmaguid, T. F., Abdel-Magied, R. K., Shazly, M., and Wifi, A. S., A Dynamic Programming Approach for Minimizing the Number of Drawing Stages and Heat Treatments in Cylindrical Shell Multistage Deep Drawing, Computers & Industrial Engineering, Vol. 66, No. 3, 2013, pp. 525-532.

[15]  Pacheco, M., Celentano, D., García-Herrera, C., Méndez, J., and Flores, F., Numerical Simulation and Experimental Validation of a Multi-Step Deep Drawing Process, International Journal of Material Forming, Vol. 10, No. 1, 2017, pp. 15-27.

[16]  Brown, W. F., Mindlin, H., and Ho, C. Y., Aerospace Structural Metals Handbook: CINDAS/USAF CRDA Handbooks Operation, Purdue University, West Lafayette, USA, Code 3206, Vol. 3, 1996.

[17]  Sheng, Z., Jirathearanat, S., and Altan, T., Adaptive FEM Simulation for Prediction of Variable Blank Holder Force in Conical Cup Drawing, International Journal of Machine Tools and Manufacture, Vol. 44, No. 5, 2004, pp. 487-494.