On Validity of Analytical Method in Cracked Column Post-Buckling Analysis Using Empirical and Numerical Investigations

Subject Areas : Computational Mechanics

K  Salmalian ¹ (Department of Mechanical Engineering, Bandar Anzali Branch, Islamic Azad University, Bandar Anzali, Iran)
A  Alijani ² (Department of Mechanical Engineering, Bandar Anzali Branch, Islamic Azad University, Bandar Anzali, Iran)
H  Ramezannejad Azarboni ³ (Department of Mechanical Engineering, Ramsar Branch, Islamic Azad University, Ramsar, Iran)

Received: 2022-01-18 Accepted : 2022-03-23 Published : 2022-06-01

Keywords:

References:

1.  Irwin G.R., 1957, Analysis of stresses and strains near the end of a crack traversing a plate, Journal of Applied Mechanics 24: 361-364.


2.  Alijani A., Abadi M.M., Darvizeh A., Abadi M.K., 2018, Theoretical approaches for bending analysis of founded Euler–Bernoulli cracked beams, Archive of Applied Mechanics88(6): 875-895.


3.  Ricci P., Viola E., 2006, Stress intensity factors for cracked T-sections and dynamic behaviour of T-beams, Engineering Fracture Mechanics73(1): 91-111.


4.  Yokoyama T., Chen M.C., 1998, Vibration analysis of edge-cracked beams using a line-spring model, Engineering Fracture Mechanics59(3): 403-409.


5.  Okamura H., Liu H.W., Chu C.S., Liebowitz H., 1969, A cracked column under compression, Engineering Fracture Mechanics1(3): 547-564.


6.  Skrinar M., 2019, On the application of the simplified crack model in the bending, free vibration and buckling analysis of beams with linear variation of widths, Periodica Polytechnica Civil Engineering63(2): 423-431.


7.  Biondi B., Caddemi S., 2005, Closed form solutions of Euler–Bernoulli beams with singularities, International Journal of Solids and Structures42(9-10): 3027-3044.


8.  Biondi B., Caddemi S., 2007, Euler–Bernoulli beams with multiple singularities in the flexural stiffness, European Journal of Mechanics-A/Solids26(5): 789-809.


9. Al-Shayea N.AR., Baluch M.H., Azad A.K., 1987, Influence of non-propagating cracks on conservative buckling of columns, Transactions of the Canadian Society for Mechanical Engineering 11(4): 215-220.


10.  Alijani A., Abadi M.K., Razzaghi J., Jamali A., 2019, Numerical analysis of natural frequency and stress intensity factor in Euler–Bernoulli cracked beam, Acta Mechanica230(12): 4391-4415.


11.  Mottaghian F., Darvizeh A., Alijani A., 2018, Extended finite element method for statics and vibration analyses on cracked bars and beams, Journal of Solid Mechanics10(4): 902-928.


12.  Khoei A.R., 2014, Extended Finite Element Method: Theory and Applications, John Wiley & Sons.


13.  Rabczuk T., Bordas S.P.A., Askes H., 2010, Meshfree Discretization Methods for Solid Mechanics, in Encyclopedia of Aerospace Engineering, Chichester, UK, John Wiley & Sons.


14.  Shirazizadeh M.R., Shahverdi H., 2015, An extended finite element model for structural analysis of cracked beam-columns with arbitrary cross-section, International Journal of Mechanical Sciences99: 1-9.


15.  Jia L.J., Ge H., 2019, Ultra-low-Cycle Fatigue Failure of Metal Structures Under Strong Earthquakes, Springer Nature Singapore Pte Ltd.


16.  Turvey G.J., Zhang Y., 2006, A computational and experimental analysis of the buckling, postbuckling and initial failure of pultruded GRP columns, Computers & Structures84(22-23): 1527-1537.


17.  Debski H., Teter A., Kubiak T., Samborski S., 2016, Local buckling, post-buckling and collapse of thin-walled channel section composite columns subjected to quasi-static compression, Composite Structures136: 593-601.


18.  Mazaheri H., Rahami H., Kheyroddin A., 2018, Static and dynamic analysis of cracked concrete beams using experimental study and finite element analysis, Periodica Polytechnica Civil Engineering62(2): 337-345.


19.  Anifantis N., Dimarogonas A., 1984, Post buckling behavior of transverse cracked columns, Computers & Structures18(2): 351-356.


20.  Anifantis N., Dimarogonas A., 1983, Imperfection post-buckling analysis of cracked columns, Engineering Fracture Mechanics 18(3): 693-702.


21.  Ke L.L., Yang J., Kitipornchai S., Xiang Y., 2009, Flexural vibration and elastic buckling of a cracked Timoshenko beam made of functionally graded materials, Mechanics of Advanced Materials and Structures16(6): 488-502.


22.  Bouboulas A., Anifantis N., 2016, Three-dimensional finite element modeling for post-buckling analysis of cracked columns, International Journal of Structural Integrity 7(3): 397-411.


23.  Akbaş Ş.D., 2016, Post-buckling analysis of edge cracked columns under axial compression loads, International Journal of Applied Mechanics8(08): 1650086.


24. Akbaş Ş.D., 2019, Post-buckling analysis of a fiber reinforced composite beam with crack, Engineering Fracture Mechanics212: 70-80.


25.  Akbaş Ş.D., 2015, Post-buckling analysis of axially functionally graded three-dimensional beams, International Journal of Applied Mechanics7(03): 1550047.


26.  Yang G., Bradford M.A., 2015, Thermoelastic buckling and post-buckling of weakened columns, Structures 1: 12-19.


27.  Kamocka M., Mania R.J., 2019, Post-buckling response of FML column with delamination, Composite Structures230: 111511.


28.  Ke L.L., Yang J., Kitipornchai S., 2009, Postbuckling analysis of edge cracked functionally graded Timoshenko beams under end shortening, Composite Structures90(2): 152-160.


29.  Shariati M., Majd Sabeti A.M., Gharooni H., 2014, A numerical and experimental study on buckling and post-buckling of cracked plates under axial compression load, Journal of Computational & Applied Research in Mechanical Engineering4(1): 43-54.


30.  Yang J., Chen Y., 2008, Free vibration and buckling analyses of functionally graded beams with edge cracks, Composite Structures83(1): 48-60.


31.  Nayfeh A.H., Emam S.A., 2008, Exact solution and stability of postbuckling configurations of beams, Nonlinear Dynamics54(4): 395-408.


32.  Ma L.S., Lee D.W., 2012, Exact solutions for nonlinear static responses of a shear deformable FGM beam under an in-plane thermal loading, European Journal of Mechanics-A/Solids31(1): 13-20.


33.  Emam S.A., Nayfeh A.H., 2009, Postbuckling and free vibrations of composite beams, Composite Structures88(4): 636-642.


34.  Yaghoobi H., Torabi M., 2013, An analytical approach to large amplitude vibration and post-buckling of functionally graded beams rest on non-linear elastic foundation, Journal of Theoretical and Applied Mechanics51(1): 39-52.


35.  Nasirzadeh R., Behjat B., Kharazi M., 2018, Finite element study on thermal buckling of functionally graded piezoelectric beams considering inverse effects, Journal of Theoretical and Applied Mechanics56(4): 1097-1108.


36.  Santos H.A.F.A., Gao D.Y., 2012, Canonical dual finite element method for solving post-buckling problems of a large deformation elastic beam, International Journal of Non-Linear Mechanics47(2): 240-247.


37.  Cai K., Gao D.Y., Qin Q.H., 2014, Postbuckling analysis of a nonlinear beam with axial functionally graded material, Journal of Engineering Mathematics88(1): 121-136.


38.  Amara K., Bouazza M., Fouad B., 2016, Postbuckling analysis of functionally graded beams using nonlinear model, Periodica Polytechnica Mechanical Engineering60(2): 121-128.


39.  Correia J.R., Branco F.A., Silva N.M.F., Camotim D., Silvestre N., 2011, First-order, buckling and post-buckling behaviour of GFRP pultruded beams, Part 1: Experimental study, Computers & Structures89(21-22): 2052-2064.


40.  Ghavanloo E., 2020, Semi-analytical solution for post-buckling analysis of simply-supported multi-stepped columns, Structures 27: 1086-1092.


41.  Gürel M.A., Kisa M., 2005, Buckling of slender prismatic columns with a single edge crack under concentric vertical loads, Turkish Journal of Engineering and Environmental Sciences29(3): 185-193.


42. Wood R.D., Schrefler B., 1978, Geometrically non‐linear analysis—A correlation of finite element notations,International Journal for Numerical Methods in Engineering 12(4): 635-642.