List of Articles a

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Fatigue Analysis and Optimization of Crankshaft of V8 Diesel Engine
  علی عبداللهی فر محمدامید خشوعی سید مسعود هاشمی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Evaluation of two lattice Boltzmann methods for fluid flow simulation in a stirred tank
  SeyedMehdi Naghavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Experimental measurement of dynamic viscosity of CeO2-EG at different concentrations and temperatures and proposing a new correlation
  محمد اکبری امیرحسین سعیدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Optimization of electronic boards equipped with the BGA package to improve the response in random vibration
  میلاد شهسواری مسعود عسگری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Numerical study on the effect of input variations on bulge height in hot tube metal gas forming process
  مهدی چوگان محسن لوح موسوی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Effect of heat treatment on microstructural properties of three-layer sheet aluminum magnesium - aluminum - stainless steel
  داوود میراحمدی ابوالفضل غلام زاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Modeling of the beam discontinuity with two analyses in strong and weak forms using a torsional spring model
  مصطفی مستان آبادی علی علی جانی ابوالفضل درویزه فاطمه متقیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Analysis of Stresses in Helicopter Composite blade in Hovering Maneuver
  علی اصغر نادری محسن نظری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Deflection and Free Vibration of Sandwich Panel with Honeycomb Core on Winkler Elastic Foundation
  یونس یوسفی حسین وحدانی فر رضا شیرانی محمد دهقانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Investigation of the effect of buckling initiator on energy absorption of thin-walled circular tubes by using of numerical simulation
  فائزه عبدالهی محمد جواد رضوانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Evaluating the impact of length and thread pitch on the stress distribution in dental implants and surrounding bone using finite element method
  مسیح فیروزبخت حامد عجبی نائینی مصطفی پیرمرادیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Numerical simulation of mixed convection heat transfer of nanofluid in an inclined enclosure by applying LBM
  ارش کریم پور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Implementing a Practical Light Transmission System in order to Lighting an Office with Zero Energy Consumption
  جواد اشکبوس اصفهانی شاهرخ شجاعیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Investigation of nanoparticles diameter on free convection of Aluminum Oxide-Water nanofluid by single phase and two phase models
  میثم اسفندیاری بابک مهماندوست آرش کریمی پور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Time Dependent Analysis of Micro-tubes Conveying Nanofluids Under Time-Varying Heat Flux
  محمد حسینی میثم خالویی عباس زندی باغچه مریم
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Experimental investigation of the effect of suspended nanoparticles into conventional fluid on the heat transfer improvement
  ارش کریم پور داود طغرایی امید علی اکبری مجید زرین قلم غلامرضا احمدی شیخ شبانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Producing the titanium nano composite statically compacted with the different pressure and investigation of the mechanical properties
  سید مهران زحلی فرزاد فریبا
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - A model for enhanced heat transfer in an enclosure using Nano-aerosols
  نوید قاجاری داود طغرایی احمدرضا عظیمیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Analytical and numerical modeling of erosive projectiles into steel fiber reinforced concrete target
  مهدی هدایتیان خداداد وواحدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Manufacturing a trough parabolic solar collector and predicting its theoretical performance
  محمود تاجی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Providing a thermodynamic model to simulate the spark ignition engine fueled with natural gas and ethanol mixture
  حسن زمانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Assessment of a Column Type Six-Component Force/Torque Sensor by Theoretical, Simulation and Experimental Approaches
  سیدرضا حمزه لو محمدمراد شیخی حسین اکبری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Study of the Notching HSS Rolls by CBN Tool using RSM Method
  محسن جعفری دینانی امین کلاه دوز سید علی افتخاری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Nanofluid forced convection through a microtube with constant heat flux and slip boundary
  سعید جاوید آرش کریمی پور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Flow simulation of gallium in a cylindrical annulus in the presence of a magnetic field for improving the casting process
  مسعود افرند مسعود کثیری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - Energy Harvesting Electrical from Nano Beam with Layer Piezoelectric under Random Vibration
  حسین وحدانی فر رضا شیرانی محمد دهقانی یونس یوسفی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Vibration Analysis of FG Micro-Beam Based on the Third Order Shear Deformation and Modified Couple Stress Theories
  Mehdi Alimoradzadeh Mehdi Salehi Sattar Mohammadi Esfarjani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Asymmetric buckling analysis of the circular FGM plates with temperature-dependent properties under elastic medium
  علیرضا نداف اسکویی هادی محمدی هویه وحید علایی خداداد واحدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Optimization of the Pulsed Gas Tungsten Arc Welding in Dissimilar Joining Austenitic Stainless Steel AISI 316L to Nickel-Base Super Alloy of Monel 400
  علی خلیلی مسعود کثیری عسگرانی مرتضی شمعانیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Free vibration analysis of circular sandwich plates with clamped FG face sheets
  یونس محمدی کیوان حسینی صفری محسن رحمانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - The mixed mode fracture mechanics in a hole plate bonded with two dissimilar plane
  محمد رحیم ترشیزیان حسین اندرزجو
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - Design and optimization of poly lactic acid/bioglass composite screw for orthopedic applications
  عماد حسینی انوشه زرگر خرازی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Ti-6Al-4V Synthesized by Mechanical Alloy Method and Mechanical and Bioactivity Properties of Ti-6Al-4V/HA-Clay Nano composite
  محمدعلی مطلبی ابراهیم کرمیان مجید کریمیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - Numerical investigation of heat transfer and laminar Water-Al2O3 ‎nanofluid flow in a rectangular Rib-Microchannel
  داود طغرایی آرش کریمی پور امید علی اکبری مجید زرین قلم حبیب اله عالی‌پور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Experimental investigation of relative thermal conductivity of MWCNTs-CuO/Water nanofluids
  مسعود زاده‌خواست داود طغرایی آرش کریمی‌پور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Experimental, numerical and analytical investigation of the new metal/composite Comeld Joint
  محمد معین سیف خداداد واحدی عرفان قیاسی روح اله حسینی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - An experimental investigation on effect of hybrid solid MWCNTs and MgO on thermal conductivity of ethylene glycol
  مسعود وفایی مسعود افرند
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Determination The Stress Intensity Factor in The Un-Central Edge Cracks With The concentrated Load
  فرزاد فریبا سید مهران زحلی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - A new plan to connect aluminum tubes of subsurface structures
  غلامرضا مزروعی علی حیدری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Flexural monitoring of carbon fiber/epoxy composite by acoustic emission
  نیما بهشتی زاده امیر مصطفی پور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - Friction Stir Welding؛ Material Flow؛ Heat Generation؛ Thermal Simulation؛ Poly methyl methacrylate (PMMA)
  حامد آقاجانی درازکلا
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - Experimental Investigation of Nano-structured Aluminum Production Using Accumulative channel-die compression bonding (ACCB)
  محسن مطهری نژاد سعید شهرکی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - Simulation microcapsules reinforced by carbon nanotubes contained in a capsule-based self-healing materials
  جعفر اسکندری‌جم فاطمه خانی محمود فرهادی‌نیا
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - A Pitch-Catch Based Online Structural Health Monitoring of Pressure Vessels, Considering Corrosion Formation
  سیدحمیدرضا هاشمی حمیدرضا هوشیارمنش مجتبی قدسی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - Failure Mechanisms Investigation in Thermal Barrier Coatings under Isothermal and Non-sothermal Fatigue Loadings using Design of Experiments
  محمد آزادی غلامحسین فرهی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Free vibration Study of simply supported cylindrical laminateds panels with piezoelectric layer
  مصطفی معطری فرزان براتی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - AZ31/HA-Zeolite Nano Crystalline Biocomposite Fabricated by Mechanical Alloying and Powder Metallurgy: Mechanical Properties
  حسن قیصری ابراهیم کرمیان محمد براتی سده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - Optimization of the parameters of low-carbon steel (EN10130) welding using friction stir welding method
  اکبر علیمحمدی مسعود کثیری مسعود افرند حسین نوروزی فروشانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  49 - Numerical study on the effect of hammering pressure on thickness reduction in hot tube metal gas forming process
  علی طالبی انارکی محسن لوح موسوی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  50 - Dynamic modeling and nonlinear vibration simulation of piezoelectric micro-beam in self sensing mode of atomic force microscope
  احمد حقانی رضا قادری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  51 - Investigation into Aging Effect on Wear Behavior of Titanium Alloy
  امیر قیصریان محمود عباسی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  52 - Investigation the Milling Strategies Effects on Machining of Convex Surfaces made of Glass/Epoxy Composite
  هادی محمدی هادی اسکندری ایمان دانایی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  53 - Dynamic Instability Analysis of Embedded Multi-walled Carbon Nanotubes under Combined Static and Periodic Axial Loads using Floquet–Lyapunov Theory
  Habib Ramezannejad Hemad Keshavarzpour Reza Ansari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  54 - On the dynamic stability of a flying vehicle under the follower and transversal forces
  Omid Kavianipour Majid Sohrabian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  55 - Modal Analysis Turboshaft Test Stand Motor Designed by Using ANSYS
  مجتبی حسنلو سید غلامرضا میرحسینی محمود صادق زاده احمد باقری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  56 - New laboratory scale Grinding method to predict energy and the feed grindability of mill of Sarcheshmeh Copper Complex
  محمد رزانی ابوالفضل معصومی مسعود رضایی زاده محمد نوع پرست
• Open Access Article
  • Abstract Page
  • Full-Text
  
  57 - Thermo-elastic Analysis of Functionally Graded Thick- Walled Cylinder with Novel Temperature – Dependent Material Properties using Perturbation Technique
  Alireza Nadafoskoue hadi mohammadi hooyeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  58 - WiFi Based Massager Device with NodeMCU Through Arduino Interpreter
  Ata Jahangir Moshayedi Mohadeseا Sadat Hosseini Farzaneh Rezaee
• Open Access Article
  • Abstract Page
  • Full-Text
  
  59 - Stress intensity factor at the hole-edge cracks tips in a finite plate
  Mohammad Rahim Torshizian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  60 - Thermo-mechanical analysis of a coated cylinder head
  Hojjat Ashouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  61 - Experimental Investigation and Numerical Prediction of Fatigue Life in Force Fitted Fastener Holes
  Hadi Taghizadeh Tagbakhsh Chakherlou
• Open Access Article
  • Abstract Page
  • Full-Text
  
  62 - Computational fluid dynamics analysis and geometric optimization of solar chimney power plants by using of genetic algorithm
  Amir Karami Davood Toghraie
• Open Access Article
  • Abstract Page
  • Full-Text
  
  63 - The Effect of Heat Treatment on Springing of AISI301
  Majid Karimian Ehsan Nourouzi Esfahani Mohammad Bagherboom
• Open Access Article
  • Abstract Page
  • Full-Text
  
  64 - Structural Analysis of Unsymmetric Laminated Composite Timoshenko Beam Subjected to Moving Load
  Mohammad Javad Rezvani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  65 - PID Tuning Method on AGV (automated guided vehicle) Industrial Robot
  Ata Jahangir Moshayedi Atanu Roy Liefa Liao
• Open Access Article
  • Abstract Page
  • Full-Text
  
  66 - Trajectory Tracking of Two-Wheeled Mobile Robots, Using LQR Optimal Control Method, Based On Computational Model of KHEPERA IV
  Amin Abbasi Ata Jahangir Moshayedi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  67 - Design of a fuzzy adaptive controller for a ducted fan (UAV)
  Meysam Rahimi
  20.1001.1.27834441.2021.13.1.2.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  68 - Experimental investigation of the effects of temperature and nanoparticles volume fraction on the viscosity of Newtonian hybrid nanofluid
  Ashkan Afshari Mohammad Eftekhari Yazdi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  69 - Micromachining the Aluminium Tubes Using Abrasive Finishing in Alternating Magnetic Field
  Reza Abedinzadeh Rasoul Gorji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  70 - Optimizing the Torque of Knee Movements of a Rehabilitation Robot
  محمدحسین زین الدینی مصطفی پیرمرادیان Farhad Azimifar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  71 - Free Vibration Analysis of Sandwich Micro Beam with Piezoelectric Based on Modified Couple Stress Theory and Surface Effects
  Mohammad khajekhabaz Ali Eftekhari Mohammad Hashemian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  72 - Experimental Study of the Effect of Laser-Cutting Process Parameters on Heat Distribution and Cutting Edge Quality of Steel Sheets
  Mahsa Mokhtarian Azam Gasemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  73 - Conceptual Design of Single-Acting Oleo-Pneumatic Shock Absorber in Landing Gear with Combined Method
  Nima Ghiasi Tabari Saeed Mahdiyeh Borojeni
• Open Access Article
  • Abstract Page
  • Full-Text
  
  74 - A new method for determination of natural frequency in bending vibration mode of single-walled carbon nanotubes
  علیرضا فتاحی واجاری
  20.1001.1.27834441.2021.13.1.1.4
• Open Access Article
  • Abstract Page
  • Full-Text
  
  75 - Dynamic Modeling, Assembly and implementing Quadrotor UAV Using PID Controller
  Mahyar Geibollahi Ata Jahangir Moshayedi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  76 - Thermo-mechanical fatigue simulation of exhaust manifolds
  Hojat Ashori
• Open Access Article
  • Abstract Page
  • Full-Text
  
  77 - A brief review on titanium alloy for dental, biotechnology and biomedical applications
  Sharif Heydari Maryam Sadat Mirinejad Mohammd Hossein Malekipour Esfahani Fatemeh Karimian Ali Attaeyan Mehran Latifi
  20.1001.1.27834441.2021.13.2.5.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  78 - Evaluation of Thermal Barrier Coating in Low Cycle Fatigue Life for Exhaust Manifold
  Hojjat Ashouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  79 - Assessing the vulnerability of Shiekh Bahaei’s bath under the blast wave
  Melika Honary Abdollah Vaez Shoushtari Erfan Jaberzadeh
  20.1001.1.27834441.2021.13.2.4.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  80 - The dynamic response of aircraft landing gear at the moment of landing with regard to smart fluid dampers content MR
  Nima Tabari Saeed Mahdiyeh Borojeni
  20.1001.1.27834441.2021.13.1.4.7
• Open Access Article
  • Abstract Page
  • Full-Text
  
  81 - A new approach using Machine Learning and Deep Learning for the prediction of cancer tumor
  Fatemeh Asgari Arian Minooei Somayeh Abdolahi Reza Shokrani Foroushani Atefeh Ghorbani
  20.1001.1.27834441.2021.13.4.4.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  82 - The effect of physical and mechanical properties on the abrasion resistance of artificial stones produced with granite waste
  Seyyed Mohammad Javad Mousavi Reza Abedinzadeh Mohammad Reisi
  10.71939/jsme.2023.1091984
• Open Access Article
  • Abstract Page
  • Full-Text
  
  83 - Fracture analysis of multiple axisymmetric interfacial cracks in an FGM Coated orthotropic layer
  Behrooz Momeni
  20.1001.1.27834441.2021.13.1.6.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  84 - Using finite element model in calculation of stress concentration factor around an elliptical hole in composite hybrid lamina
  Pedram Lorzadeh
  20.1001.1.27834441.2021.13.1.3.6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  85 - Investigating the effect of solid solution treatment on the corrosion properties of biodegradable Mg-Zn-RE-xCa (x = 0, 2.5) alloy
  Saeed Alibabaei Masoud Kasiri-Asgarani HamidReza Bakhsheshi-Rad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  86 - Investigation of modern ceramics in bioelectrical engineering with proper thermal and mechanical properties
  Sharif Heydari Ali Attaeyan Pegah Bitaraf Amir Mohammad Gholami Bahareh Kamyab Moghadas
  20.1001.1.27834441.2021.13.3.5.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  87 - Experimental Study for Addition Rough Surfaces on a Vehicle Floor Body and Comparison of Aerodynamics Coefficient
  کوروش رایزن احمد کشاورزی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  88 - Design and construction of a unicycle robot controlled by its center of gravity
  Masoumeh Zeini Mostafa Pirmoradian
  20.1001.1.27834441.2021.13.2.6.1
• Open Access Article
  • Abstract Page
  • Full-Text
  
  89 - CFD simulation of hydrothermal of a nanofluid in a microchannel subjected to a magnetic field
  Mohammad Reza Assari Arman Mohammadian Alireza Jafar Gholibeik
  20.1001.1.27834441.2021.13.3.2.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  90 - Convergence of Legendre and Chebyshev multiwavelets in Petrov-Galerkin method for solving Fredholm integro-differential equations of high orders
  Saeed Akhavan
  20.1001.1.27834441.2021.13.3.4.1
• Open Access Article
  • Abstract Page
  • Full-Text
  
  91 - Investigation of additive manufacturing of porous Ti-6Al-4V alloy: Geometry analysis for dental applications
  Mohammad Hossein Malekipour Esfahani Fatemeh Safdarian Sharif Heydari
  20.1001.1.27834441.2022.14.4.1.7
• Open Access Article
  • Abstract Page
  • Full-Text
  
  92 - An experimental model for predicting normal solar performance chimneys concerning the percentage of openings
  Sajede Nazari Malihe Taghipour Aliakbar Heidari
  20.1001.1.27834441.2021.13.3.3.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  93 - Dynamic stability analysis of functionally graded Euler-Bernoulli nanobeams under a sequence of moving nanoparticle based on nonlocal elasticity theory
  Rahman Khanahmadi Mohammad Hashemian Mostafa Pirmoradian
  20.1001.1.27834441.2021.13.2.3.8
• Open Access Article
  • Abstract Page
  • Full-Text
  
  94 - An Agglomerate Model for Evaluating the Electrochemical and Hydrodynamic Characteristics of a Proton Exchange Membrane Fuel Cell
  Pouya Barnoon Davood Toghraie Babak Mehmandosut Mohammad Ali Fazilati S. Ali Eftekhari
  20.1001.1.27834441.2021.13.3.1.8
• Open Access Article
  • Abstract Page
  • Full-Text
  
  95 - The analysis of failure for a stud bolt with reduced shank under dynamic loading
  Mahdi Ghayuri Mohammad Rahim Torshizian
  20.1001.1.27834441.2021.13.2.1.6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  96 - Effect of wind speed on the drag force and wall shear stress of domes in historical mosques of Iran: a case study
  Iman Pishkar Mehdi Jahangiri Rouhollah Yadollahi Farsani Ayoub Khosravi Farsani
  20.1001.1.27834441.2023.15.2.6.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  97 - The effect of Al2O3 Micro Powder added in Dielectric on Electro Discharge Machining Performance of Ti6Al4V
  Mojtaba Esmailian
  20.1001.1.27834441.2022.14.2.4.6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  98 - Thermodynamic analysis of two-shaft radial gas turbine data using artificial neural network method
  Hamidreza Mektaazadeh بابک مهماندوست Mojtaba Haratian
  20.1001.1.27834441.2021.13.2.2.7
• Open Access Article
  • Abstract Page
  • Full-Text
  
  99 - Effect of residual stress in low cycle fatigue for coated exhaust manifold
  Hojjat ashouri
  20.1001.1.27834441.2022.14.2.1.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  100 - Analysis of airflow on an airfoil using electro-hydrodynamic actuators
  Mohammad Bigdeli Alireza Ansari Gholamreza Tathiri Vahid Monfared
  20.1001.1.27834441.2021.13.1.5.8
• Open Access Article
  • Abstract Page
  • Full-Text
  
  101 - Smart car system: automobile driver's stress recognition with artificial neural networks
  Mahtab Vaezi Mehdi Nasri Farhad Azimifar
  20.1001.1.27834441.2023.15.2.3.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  102 - Feasibility study of mechanical properties of alginates for neuroscience application using finite element method
  Maryam Karimianmanesh Elham Azizifard Naghmeh Javidanbashiz Mehran Latifi Atefeh Ghorbani Sheyda Shahriari
  20.1001.1.27834441.2021.13.3.6.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  103 - Analysis of Stress Intensity Factors in Hollow Cylinders Reinforced by an Effective Coating Containing Multiple Cracks
  Mostafa Karimi Alireza Hassani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  104 - AGV (automated guided vehicle) robot: Mission and obstacles in design and performance
  Ata Jahangir Moshayedi Li Jinsong Liefa Liao
• Open Access Article
  • Abstract Page
  • Full-Text
  
  105 - Evaluation of mechanical properties of bioglass materials for dentistry application
  Mohammad Hossein Malekipour Esfahani Negar Sharifinezhad Mehran Hemati Amir Mohammad Gholami
  20.1001.1.27834441.2021.13.4.2.1
• Open Access Article
  • Abstract Page
  • Full-Text
  
  106 - Investigating the performance of hydroponic green fodder and simplified heat transfer model of nanofarm for agricultural engineering application
  Amirreza Esmaeili Hamidreza Bahrami Rozita Hajian Mohsen Karimian Ehsan Shokrani
  20.1001.1.27834441.2022.14.3.3.7
• Open Access Article
  • Abstract Page
  • Full-Text
  
  107 - Frequency responses analysis of clamped-free sandwich beams with porous FG face sheets
  Mohsen Rahmani
  20.1001.1.27834441.2022.14.1.1.1
• Open Access Article
  • Abstract Page
  • Full-Text
  
  108 - The influence of various boundary conditions on dynamic stability of a beam-moving mass system
  Ramin Motiei Mostafa Pirmoradian Hossein Karimpour
  20.1001.1.27834441.2022.14.4.2.8
• Open Access Article
  • Abstract Page
  • Full-Text
  
  109 - Dynamic optimization of load step transient response of a turbocharged spark ignition engine focusing on valves timing
  Mehdi Keshavarz Ahmad Keshavarzi
  20.1001.1.27834441.2021.13.4.5.4
• Open Access Article
  • Abstract Page
  • Full-Text
  
  110 - Investigating on process variables effect of AISI 304 stainless steel machining using minimum quantity lubricant on cutting force
  Mohammad Ali Safataj Sayed Ehsan Mirmohammadsadeghi Reza Abedinzadeh
  20.1001.1.27834441.2022.14.4.5.1
• Open Access Article
  • Abstract Page
  • Full-Text
  
  111 - Comparison between continuous sensitivity analysis and Taguchi method in optimization of electromechanical devices
  Mohammadali Tavakkoli
  20.1001.1.27834441.2022.14.1.3.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  112 - Investigation and optimization of the effect of input parameters on output parameters of electrical discharge machining of A356 nano-composite reinforced by SiC
  Amir Rahmani Ali Mokhtarian Mojtaba Rahimi
  20.1001.1.27834441.2021.13.4.1.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  113 - Evaluation of the use of robotic surgery with remote simulation for use in the field of Medical Tourism and Pro-Tourism development
  Esmaeil Khaksarshahmirzadi Tulen Saner Ali Attaeyan Somayeh Abdollahi Molood Mohammadi Sharif Heydari
  20.1001.1.27834441.2022.14.1.5.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  114 - Indirect prediction of flank wear using ANNs in turning of CK45
  Hossein Sepehri
  20.1001.1.27834441.2022.14.2.5.7
• Open Access Article
  • Abstract Page
  • Full-Text
  
  115 - Self-tuning consensus on directed graph in the case of time-varying nonhomogeneous input gains
  Mozhgan Bagherboum
  20.1001.1.27834441.2022.14.1.4.4
• Open Access Article
  • Abstract Page
  • Full-Text
  
  116 - A quick method for electrical energy system load shedding based on equivalent areas
  Shahrokh Shojaeian Hamed Soltani
  20.1001.1.27834441.2022.14.3.2.6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  117 - Molecular simulation for prediction of mechanical properties of polylactic acid polymer for biotechnology applications
  Amin Mansouri Ali Heidari Fatemeh Karimian Amir Mohammad Gholami Mehran Latifi Sheyda Shahriari
  20.1001.1.27834441.2021.13.4.3.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  118 - Secondary frequency control for improved dynamic performance in interconnected power system
  Farhad Mesrinejad Somaye Yaghoubi Bahador Fani
  20.1001.1.27834441.2022.14.3.5.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  119 - Investigation of cell biomechanics and the effect of biomechanical stimuli on cancer and their characteristics
  Atefeh Ghorbani Sheyda Shahriari Amir Mohammad Gholami
  20.1001.1.27834441.2021.13.4.6.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  120 - Stabilized crack-opening stresses as a function of R-ratios and stress levels
  Rahi Chermahini Majid Jabbari
  20.1001.1.27834441.2022.14.1.6.6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  121 - The relationship between body mass index (BMI) and dental caries (dmft) and simulation of mechanical properties of lithium disilicate restoration
  Behnoush Selahbarzin Yaser Mokhaieri Kowsar Mollai
  20.1001.1.27834441.2022.14.2.2.4
• Open Access Article
  • Abstract Page
  • Full-Text
  
  122 - The feasibility of using solar heating in the Yazd hospital: A case study
  Mahshid Babaei Mehdi Jahangiri Farhad Raeiszadeh Gholam Reza Aboutalebi Abbas Jafari Arya Nariman
  20.1001.1.27834441.2023.15.2.2.1
• Open Access Article
  • Abstract Page
  • Full-Text
  
  123 - Specifying the allowed remained bottom thickness after milling in CNG steel cylinders by FEM analysis and experimentation
  Mojtaba Esmailian Mohsen Shahmoradi Kamran Karimzadeh
  20.1001.1.27834441.2022.14.1.7.7
• Open Access Article
  • Abstract Page
  • Full-Text
  
  124 - The effect of the anodization voltage changes on the electric resistance of porous anodic alumina barrier layer and its thickness used in strain sensing devices
  Abolfazl Salehi Amnieh Khuzani
  20.1001.1.27834441.2022.14.2.3.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  125 - A review on evaluation of natural polymers with the approach of drug delivery system using herbal plant microcapsules
  Amirreza Esmaeili Romina Hemami Yashar Ghaffari Somayeh Abdollahi
  20.1001.1.27834441.2022.14.2.6.8
• Open Access Article
  • Abstract Page
  • Full-Text
  
  126 - Static analysis of guyed tower regarding cable sagging by using finite difference model
  Kaveh Kumarci Alireza Baharizadeh
  20.1001.1.27834441.2022.14.3.6.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  127 - Road detection by image processing, using neural network
  Ahmad Keshavarzi Mehdi Keshavarz Alireza Moradi
  20.1001.1.27834441.2022.14.3.4.8
• Open Access Article
  • Abstract Page
  • Full-Text
  
  128 - The mechanical performance of silk and collagen nanoparticles for dental applications
  Mohammad Hossein Malekipour Esfahani Behnoush Selahbarzin
  20.1001.1.27834441.2023.15.1.5.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  129 - Dynamic model of static synchronous compensator in Single-Machine Infinite-Bus power system
  S. Zanjani
  20.1001.1.27834441.2023.15.1.1.8
• Open Access Article
  • Abstract Page
  • Full-Text
  
  130 - Low cycle fatigue prediction for cylinder head considering notch stress-strain correction proposed by Neuber
  Hojjat Ashouri
  20.1001.1.27834441.2022.14.3.1.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  131 - Numerical simulation of piston with different materials for justification of its strength
  Bharosh Kumar Yadav Babin Dangal Shiva Shanker Pandey Mehdi Jahangiri
  20.1001.1.27834441.2022.14.4.6.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  132 - Improving surface roughness in barrel finishing process using supervised machine learning
  Mohammad Sajjad Mahdieh Mehdi Bakhshi Zadeh Amirhossein Zare Reisabadi
  20.1001.1.27834441.2023.15.2.1.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  133 - The effect of explosive welding variables on corrosion behavior of 304 stainless steel–copper joint in 3.5% NaCl solution concentration environment
  MohammadReza Khanzadeh Reza Peykari Hamid Bakhtiari
  20.1001.1.27834441.2022.14.4.3.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  134 - Dynamic analysis of guyed towers using direct time integration method by Newmark-β model
  Kaveh Kumarci AliReza Baharizadeh
  20.1001.1.27834441.2022.14.4.4.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  135 - Designing LQG controller based on neural network estimator for boiler system
  Hamed Khodadadi HAMID Ghadiri
  20.1001.1.27834441.2023.15.2.5.4
• Open Access Article
  • Abstract Page
  • Full-Text
  
  136 - Convergence of collocation Bernoulli wavelet method in solving nonlinear Fredholm integro-differential equations of fractional order
  Abdolali Rooholahi Saeed Akhavan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  137 - Investigating on surface roughness of nanohybrid and micro-hybrid composite resins following the use of a simplified polishing system
  Seyedeh Parvin Hosseini Fadabobeh Mehrdad Kazemian M. R Malekipour Esfahani
  10.71939/jsme.2023.1092062
• Open Access Article
  • Abstract Page
  • Full-Text
  
  138 - Lattice Boltzmann method for natural convection of nanofluid flow in a trapezoidal-shaped sinusoidal cavity by considering Brownian motion
  Nemat Ebrahimi Hossein Ahmadi Danesh Ashtiani Davood Toghraie
  20.1001.1.27834441.2023.15.1.6.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  139 - Estimation and mapping of the global component of solar radiation and wind power density over Chad
  Marcel Hamda Soulouknga Iman Pishkar Dieudonné Kaoga Kidmo Mehdi Jahangiri
  20.1001.1.27834441.2023.15.1.4.1
• Open Access Article
  • Abstract Page
  • Full-Text
  
  140 - Feedback linearization controller design for a geared transmission system considering asymmetric backlash and friction
  Shima Mirshahzadeh Hamed Khodadadi
  20.1001.1.27834441.2023.15.1.2.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  141 - Effect of friction stir welding parameters of aluminum alloy tubes on succeeding rotary draw bending
  Alireza Soleymanipoor Hamid Montazerolghaem Mohsen Loh-mousavi
  20.1001.1.27834441.2023.15.1.3.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  142 - Experimental study of turbulent wind flow over arc roofs: an ancient simple way to low energy buildings
  Farhad Raeiszadeh Mehdi Jahangiri
  10.71939/jsme.2024.1092068
• Open Access Article
  • Abstract Page
  • Full-Text
  
  143 - Design of forks and lifting system of a 10-ton forklift truck by FEM simulation
  Mohammad Sajjad Mahdieh Farshad Nazari Fadhil Abbas  Ghlaim
  10.71939/jsme.2024.1092071
• Open Access Article
  • Abstract Page
  • Full-Text
  
  144 - Stress analysis of non-linearly variable thickness rotating disk in gas turbine engine using hyper-geometric method
  Behrooz Shahriari Nedasadat Seddighi
  20.1001.1.27834441.2023.15.2.4.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  145 - A numerical simulation of accumulative press bonding process of laminated MMCs
  Vahid Nayeri Saeed Daneshmand Mohammad Heydari Vini Mohammad Yazdaniyan
  10.71939/jsme.2023.1092075
• Open Access Article
  • Abstract Page
  • Full-Text
  
  146 - Tolerance analysis (static and dynamic) of the gearbox assembly to achieve correct manufacturing tolerances
  Ehsan Mehrabi Gohari Iman Pishkar Mohammad  Alipour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  147 - Numerical solution of hovering propeller performance at various blade pitch angles and revolutions with different turbulence models
  Behrooz Shahriari Mohammad Reza Hashemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  148 - Optimization of drilling penetration rate through the optimal design of drilling leg and mechanical and hydraulic parameters of drilling using energy characteristic method (case study: South Pars gas field)
  MohammadReza Nouri Mojtaba Rahimi Ali Mokhtarian
  10.71939/jsme.2024.1092079
• Open Access Article
  • Abstract Page
  • Full-Text
  
  149 - Analysis and simulation of island mode operation in inverter-based microgrids with voltage droop controllers
  Babak Keyvani Bahador Fani Ghazanfar Shahgholian Mahnaz Hashemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  150 - Designing a robot to follow a command from the analysis of the image received from the operator
  Majid Amiri Shayan Farokhi Aleh Kouhi Ahmad Keshavarzi
  10.71939/jsme.2023.1092083
• Open Access Article
  • Abstract Page
  • Full-Text
  
  151 - Simulation of chromium, nickel and lead removal from aqueous environment using polypyrrol and its composites
  Arash Shabani Majid Riahi Samani Davood Toghraie
  10.71939/jsme.2024.1092084
• Open Access Article
  • Abstract Page
  • Full-Text
  
  152 - A geometric approach for automatic guidance of marine loading arms
  Omid Kavianipour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  153 - A study on stamping of airliner’s tail connector part through FEM simulation
  Mohammad Sajjad Mahdieh Farshad Nazari Taif Ahmed Mussa Hossein Torfy Salehi
  10.71939/jsme.2023.1092088
• Open Access Article
  • Abstract Page
  • Full-Text
  
  154 - Techno-enviro assessment and dynamic energy balance simulation of the domestic-scale solar heating system in Lebanon
  Mehdi Jahangiri Hasan Ali  Lotfi Nagafabadi Esmaeil  Moradi Seyed Mohammad  Noorbakhsh Hamed  Saghaei Hussein A.  Kazem Miqdam Tariq  Chaichan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  155 - Advancing biomedical, food, and industrial applications through carbon nanomaterials: current status and future perspectives
  A. Abdollahpour Ayda Ranjbar Azadeh Asefnejad Bahareh Kamyab Moghadas Yashar Ghaffari David Otasowie Ogbemudia Mehid Taheri
  10.71939/jsme.2023.1092090
• Open Access Article
  • Abstract Page
  • Full-Text
  
  156 - Conceptual design of the inlet flow preheat system to the nozzle test equipment of a turbine engine
  Behrooz Shahriari Hamid Farrokhfal Mohammad Reza Nazari
  10.71939/jsme.2024.1092091
• Open Access Article
  • Abstract Page
  • Full-Text
  
  157 - Investigation of forming process of the floor of Volvo truck’s body via FEM simulation
  Mohammad Sajjad Mahdieh Farshad Nazari Hussam Yuness  Mane’
  10.71939/jsme.2024.1092092
• Open Access Article
  • Abstract Page
  • Full-Text
  
  158 - Estimation of fatigue lifetime of a cervical disc prosthesis using finite element and experimental investigation of the amount of wear
  Sana Ghafarmoghadam Alireza Seifzadeh Ali Mokhtarian Reza Abedinzadeh
  10.71939/jsme.2024.1092093
• Open Access Article
  • Abstract Page
  • Full-Text
  
  159 - a
  مهدی صفایی محمد جواد محمودی محمودی پدرام صفرپور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  160 - Mathematical Analysis of Shearing Viscoelastic Beam Subjected to Continuous Moving Load
  محمد طهرانی حمیدرضا ایپک‌چی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  161 - Vibration Analysis of Timoshenko Beam reinforced with Boron-Nitride Nanotube on Elastic Bed
  ایلدا عبداللهی محمدحسین یاس
• Open Access Article
  • Abstract Page
  • Full-Text
  
  162 - Analysis of chaotic vibration in a hexagonal centrifugal governor system
  مصطفی غیور سعید ضیایی راد حبیب رمضان نژاد آزاربنی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  163 - Modified Fixed Grid Finite Element Method to Solve 3D Elasticity Problems of Functionally Graded Materials
  محمد جواد کاظم زاده پارسی فرهنگ دانشمند
• Open Access Article
  • Abstract Page
  • Full-Text
  
  164 - Numerical and Experimental Study of Effect of Scan Velocity in Laser Forming by Temperature Gradient Mechanism
  حسن مسلمی نائینی ولی اله پناهی زاده محمد حسین پور گللو سیامک مزدک
• Open Access Article
  • Abstract Page
  • Full-Text
  
  165 - Experimental and Numerical Analysis of the Critical Buckling Load of Cracked Sheets
  دانیال شیخی محمدمهدی نجفی زاده علیرضا نظام آبادی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  166 - The Effect of Inclined U-Notch Geometry on Mode Ratio (KII/KI) under Mixed Mode (I + II) Loading
  احسان براتی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  167 - An Initiative Plan of the Equivalent Model for Simulation of theWelding Process
  علی حیدری محمدرضا فروزان جعفر گلستانه
• Open Access Article
  • Abstract Page
  • Full-Text
  
  168 - Optimal Trajectory Planning of a Mobile Robot with Spatial Manipulator For Spatial Obstacle Avoidance
  مصطفی غیور مصطفی شریعتی‌نیا
• Open Access Article
  • Abstract Page
  • Full-Text
  
  169 - Free Vibration of Annular Plate Reinforced with Multi-walled Carbon Nanotubes Resting on an Elastic Foundation Using Refined Theory
  مسعود رضایی حمید محسنی منفرد سید علیرضا مهاجرانی
  298
• Open Access Article
  • Abstract Page
  • Full-Text
  
  170 - Effect of Particle Volume Fraction on the Tensile Properties of Composite Al6061/SiC Materials by Hot Extrusion
  محمد رضا ستاری محمد رنجبران
• Open Access Article
  • Abstract Page
  • Full-Text
  
  171 - Solution of Nonlinear Hardening and Softening type Oscillators by Adomian’s Decomposition Method
  بهرام گل محمدی قاسم اسعدی کردشولی علیرضا وحیدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  172 - Prediction of Fatigue Life in Notched Specimens Using Multiaxial Fatigue Criteria
  فیروز اسماعیلی گلدرق سجاد برزگر محمدی علیرضا بابائی امیر افکار
• Open Access Article
  • Abstract Page
  • Full-Text
  
  173 - Tolerance Analysis of the Trigger Mechanism Assembly Using Direct Linearization Method
  مرتضی غلامی محمد رضا موحدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  174 - Analysis of Roll Wear in Reshaping Using Finite Element Simulation
  مهدی سلمانی تهرانی رضا خدابنده شهرکی حسام ولیدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  175 - Study of the Effects of Various Boundary Conditions on the Acoustical Treatments of Double-Panel Structures Lined with Poroelatic Materials
  محمدحسن شجاعی فرد روح ا... طالبی رضا احمدی مائده امیرپور ملا
• Open Access Article
  • Abstract Page
  • Full-Text
  
  176 - Introduse and Need Assessment of Regional Aircrafts by Software and Modeling
  H. Sadat Nazeri M. Ali Shahi Ashtian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  177 - Nonlinear Vibration Analysis of Multi-Walled Carbon Nanotubes in Thermal Environment using the Nonlocal Timoshenko Beam Model
  ابوالحسن نظری نژاد گیاشی رضا انصاری حبیب رمضان نژاد آزاربنی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  178 - Dynamic Stability of Single Walled Carbon Nanotube Based on Nonlocal Strain Gradient Theory
  فرشید آقاداودی محمد هاشمیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  179 - Experimental and Numerical Study of Preform Design in Multi Stage Deep Drawing of High Strength Thin Steel Sheet
  اکبر زمانی علیشاه مهدی تاجداری جعفر اسکندری جم جمال صیدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  180 - Investigation of Shape Functions Role on the Mesh-free Method Application in Soft Tissue Elastography
  Hamed Ajabi Naeeni Mohammad Haghpanahi Hamid Behnam Hadi Pirali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  181 - Resolution composite shell with a layer of piezoelectric vibration analysis
  اکبر علی بیگلو عبدالمجید کنی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  182 - Vibration Suppression of Smart FGM Cylindrical Shells Using Magnetostrictive Layers
  منصور درویزه رضا انصاری ابوالفضل درویزه رضا رجبیه فرد
• Open Access Article
  • Abstract Page
  • Full-Text
  
  183 - Applying Differential Transform Method on the Effect of the Elastic Foundation on the out - Plane Displacement of the Functionally Graded Circular Plates
  سمیه عباسی فاطمه فرهت نیا سعید رسولی جزی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  184 - Enhancement Performance New Generation of CPU Cooling System Using Water-AL2O3 Nanofluid
  M. Aliabadi A.R. Shateri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  185 - Tolerance Analysis of the Trigger Mechanism Assembly Using Direct Linearization Method
  عبدالعلی مراثی محمد سالم
• Open Access Article
  • Abstract Page
  • Full-Text
  
  186 - Thermal Effect on the Torsional Buckling of Double Walled Carbon Nanotube Embedded in Pasternak Foundation
  علی قربانپور آرانی محمد شریف زارعی مهدی محمدی‌مهر
• Open Access Article
  • Abstract Page
  • Full-Text
  
  187 - a
  حسن قیصری ابراهیم کرمیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  188 - Nonlinear Vibration Analysis of Embedded Multiwalled Carbon Nanotubes in Thermal Environment
  رضا انصاری حبیب رمضان نژاد آزاربنی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  189 - Analysis of PVC Frames Cutting by Guillotine and Presenting Solution on Preventing Imperfection
  سعید شیری پایین دروازه مهران مرادی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  190 - Optimizing the actuation of musculoskeletal model by genetic algorithm to simulate the vertical jump
  سروش باقری کودکانی شهرام لنجان نژادیان مهرداد پورسینا
• Open Access Article
  • Abstract Page
  • Full-Text
  
  191 - Numerical Investigations on the Effect of Pulsating Pressure on Improvement of Formability in Hydroforming of Bent Tube by FEM
  امیر خورسندی محسن لوح موسوی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  192 - A Survey on Buckling and Vibrations of a Viscoelastic Beam under Distributed Lateral and Axial Loads
  حمید رضا ایپک چی حمیده صدیقی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  193 - Non-linear Static Modeling of Moderately Thick Functionally Graded Plate Using Dynamic Relaxation Method
  محمدجواد محمودی وحید محلوجی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  194 - Investigation on Process Parameters of Ball Screw Finishing Using Magnetic Abrasive Field
  آرش محمدی عبدالحمید عزیزی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  195 - Investigation of Linear and Nonlinear Buckling of Orthotropic Graphene Sheets with Nonlocal Elasticity Theories
  مصطفی صادقیان مهرداد جبارزاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  196 - Study on of Foil Rolling With Lubrication Effects
  مینا عرب اف محمود سلیمی محسن اصفهانیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  197 - Experimental study of piston scuffing effect on engine performance parameters
  سید اشکان موسویان غلامحسن نجفی برات قبادیان سید مصطفی آقا میرسلیم سید محمد جعفری مجتبی محرابی وقار
• Open Access Article
  • Abstract Page
  • Full-Text
  
  198 - Investigation of Dynamical Behavior (Transverse Vibration) and Instability Analysis of Carbon Nanotubes Conveying Nanofluid
  سهیل اویسی حسن نحوی داود طغرایی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  199 - Modeling and Sensitivity Analysis of Full Toroidal Continuously Variable Transmission
  مجتبی دلخوش محمود سعادت فومنی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  200 - A New Strain Based Model for Predicting Multiaxial Fatigue Life of Metals
  رحمت‌ا... قاجار صفا پیمان جواد علیزاده کاکلر
• Open Access Article
  • Abstract Page
  • Full-Text
  
  201 - Static Deflection of Hinged-Hinged piezoelectric Multilayer Beam Under Different Loading Conditions
  افشین منوچهری‌فر علیرضا جلیلی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  202 - Investigation of the Effectiveness of Using a CVT in Samand Automobile
  محسن اصفهانیان محسن نیک‌بین
• Open Access Article
  • Abstract Page
  • Full-Text
  
  203 - Numerical and Experimental Evaluation of Residual Stress and Fatigue Strength of Steel CK35 in Shot Peening Process
  مهدی تاجداری حمیدرضا بهاروندی علیرضا مرادخانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  204 - Thermal Buckling Analysis of Circular FGM Plate with Actuator/Actuator Piezoelectric Layer Based on Neutral Plane
  محمد مهدی نجفی زاده محسن مالمراد آرش شریفی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  205 - Free Vibration Analysis of FGM Cylindrical Shell with Supported Ring Based on Reddy Model under Clamped Boundary Condition
  محمد رضا عیسوند زیبائی مهدی سلمان زاده رسول موسوی‌فر
• Open Access Article
  • Abstract Page
  • Full-Text
  
  206 - Analysis of Linear Two-Dimensional Equations by Hermitian Meshfree Collocation Method
  محمدامین بهرامی مهرداد فروتن
• Open Access Article
  • Abstract Page
  • Full-Text
  
  207 - Inverse Identification of Circular Cavity in a 2D Object via Boundary Temperature Measurements Using Artificial Neural Network
  محمد امین احمدفرد محمد جواد کاظم زاده پارسی علیرضا تهور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  208 - Numerical and Experimental Investigations on Springback of U-bending of DP600 Steel Alloy Sheet
  محمد شفیعی علویجه حسین ترابیان حسین امیرآبادی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  209 - Using the Ultrasonic Nondestructive Methods for Prediction of Mechanical Properties of AISI 4140 Alloy Steel
  محمد حمیدنیا فرهنگ هنرور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  210 - Free and Forced Vibration Analysis of Composite Laminated Conical Shells under Different Boundary Conditions Via Galerkin Method
  آیدین نصیری راد رضا انصاری حسام روحی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  211 - Effect of Bed and Crack on the Natural Frequency for the Timoshenko Beam Using Finite Element Method
  افشین منوچهری فر فرید ابطحی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  212 - Buckling Analysis of Orthotropic and Anisotropic Rectangular Plates by GDQ Method
  محسن فتاحی فاطمه فرهت نیا منصور درویزه
• Open Access Article
  • Abstract Page
  • Full-Text
  
  213 - Nonlocal Mechanical Buckling Analysis of Nano Single Layer Sheets Using Differential Quadrature method
  M. Sadeghian M. Jabbarzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  214 - Influence of Elastic Support on the Energy Absorption in Front Crash Ductile Failure Criterion
  حسین خانجانی احمد کشاورزی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  215 - a
  محمدامیر آقانجفی بابک مهماندوست
• Open Access Article
  • Abstract Page
  • Full-Text
  
  216 - Bending Analysis of Rectangular FGM Plates based on the Extended Kantorovich Method
  محمد مهدی نجفی زاده مجید علوی فؤاد سلماسی شیما آذری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  217 - Bending Analysis of Carbon Nanotubes with Small Initial Curvature Embedded on an Elastic Medium Based on Nonlocal Elasticity and Galerkin Method
  اعظم عارفی محمود سلیمی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  218 - Study of Aspect Ratio Effect on Mechanical Properties Polymer/NanoComposite
  محمد هاشمی گهروئی حسین گلستانیان مهدی سلمانی تهرانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  219 - Low-speed impact behavior of two-layer similar and dissimilar metal laminate structures
  هادی خرّمی شاد محمد باقری توفیقی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  220 - Numerical Analysis of Melting Process of Compounds Containing Nanoparticles for the Development of Phase Change Process
  نادر پورمحمود ناصر مصطفوی نیا امیر حسن زاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  221 - Study Effect of Deformation Nanochannel Wall Roughness on The Water-Copper Nano-Fluids Poiseuille Flow Behavior
  محمد میثم امراللهی پورشیرازی داود طغرایی احمدرضا عظیمیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  222 - Investigation of Friction Coefficient Effects on Fishtail Defect in Hot Ring Rolling Process
  امیر حسین قیصری محمدرضا فروزان عبدالعلی مراثی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  223 - Optimum Die Design in Drawing of Square Section Rod from Round Bar
  حشمت‌اله حقیقت سید بابک الهویسی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  224 - Axial Crushing Analysis of Sandwich Thin-walled Tubes using Experimental and Finite Element Simulation
  سجاد آذرخش عباس رهی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  225 - Investigation on Buckling of Orthotropic Circular and Annular Plates of Continuously Variable Thickness by Optimized Ritz Method
  فاطمه فرهت نیا آرش گل شاه
• Open Access Article
  • Abstract Page
  • Full-Text
  
  226 - Influence of EDM Characteristic Parameters on the Surface Microstructure in CK45 Alloy Steel
  سینا عابدپور اسماعیل جعفری احمد افسری سعید حدیدی مود
• Open Access Article
  • Abstract Page
  • Full-Text
  
  227 - An Experimental Study on Effects of Hot Plate Welding Parameters on Toughness Energy and Tensile Strength in Weld Line of Thermoplastic Parts
  امیر هوشمندپور عبدالمحمد رضاوند مهدی نظری مرویان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  228 - Experimental Analysis of Crashworthiness Behavior of Energy Absorber Tubes Under 3D Oblique Load
  ابوالفضل خلخالی علیرضا سالور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  229 - Investigation of Axial to Lateral Load ratio on the Buckling of Thin Orthotropic Cylindrical Shells
  مسیب اسماعیل دخت رضا اکبری آلاشتی محمدحسن قاسمی مرتضی دردل
• Open Access Article
  • Abstract Page
  • Full-Text
  
  230 - Buckling Analysis of Orthotropic and Anisotropic Rectangular Plates by GDQ Method
  حسن مسلمی نائینی مهدی تاجداری سیامک مزدک ولی اله پناهی زاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  231 - Elastic Buckling Analysis of Composite Shells with Elliptical Cross-section under Axial Compression
  منصور درویزه ابوالفضل درویزه رضا انصاری الهام کاظمی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  232 - Investigation of Important Parameters in Residual Stress Determination in Isotropic Plates and Laminated Composites by Slitting Method
  محمود مهرداد شکریه سعید اکبری رکن‌آبادی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  233 - Disk Vibration Analysis of Functionally Graded Materials
  محبوبه روائی حسن نحوی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  234 - Study on the Effect of Process and Materials on Tensile Strength of the WGRT and Polypropylene Injection Molded Parts
  مهدی بزرگی طاهر ازدست عبدالمحمد رضاوند
• Open Access Article
  • Abstract Page
  • Full-Text
  
  235 - Review of Micro-Particles of Hydroxyapatite Nanoparticles by Ball Milling
  F. Fardi Pour M. Najafi Anaraki M. Karmian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  236 - Numerical Determination of Delamination Onset in Laminated Symmetric DCB Specimen
  محمود مهرداد شکریه محمد حیدری رارانی سجاد رحیمی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  237 - Study of the Effects of Lacing Rods Location on Natural Frequencies in Last Stage Blades of a Steam Turbine
  مهدی نوذرپور عباس رهی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  238 - An Upper Bound Solution for Analysis of Twist Extrusion Process with Elliptical Die Cross-section
  یاسر میرباقری حامد معصومی مجید سیدصالحی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  239 - Surface Effect on Nonlinear Free Vibration Analysis of Nanotubes
  جعفر اسکندری جم یاسر میرزایی بهنام قشلاقی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  240 - Finite Element Analysis of Safety Mechanism in a Mechanical Controller
  مهدی مساح کورش حسن‌پور مهرداد پورسینا مهدی سلمانی تهرانی مسیح سنبلستان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  241 - Design and Production of a Pneumatic Moving Exciter for Determination of Vibration Behavior of Structures in Variable Frequencies
  فیروز بختیاری‌نژاد میثم میرزایی مهدی وهابی امیر ابوالفضل صورتگر
• Open Access Article
  • Abstract Page
  • Full-Text
  
  242 - A Roll Wear Prediction Model in Hot Plate Rolling
  امیر نورانی محمود سلیمی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  243 - Dynamic Stability Analysis of a Beam Excited by a Sequence of Moving Mass Particles
  مصطفی پیرمرادیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  244 - Investigation of Manufacturing Processes of the MetallicCNG Pressure Vessels
  مهدی ظهور محسن رحیمیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  245 - Study the Effects of Nano Fluid as a Coolant in Milling Process for Improving Machining Parameters
  احمد افسری امیرحسین زارعی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  246 - Check Tic-coated Tungsten Carbide Tool Wear in Machining Steel
  M. Karimian , E. Mir Mohammad Sadeghi M. Mokhles Pour Esfahani M. badakhshian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  247 - Design Servo System Type and Positioning of Pole Observer Full Rank a Piezoelectric Servo Valve without Integrator
  مهدیه حامدی هادی همایی خیام صفری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  248 - Parameter Analysis and optimization of equal channel angular pressing extrusion for titanium alloy using Taguchi design of experiments method
  حسن خادمی زاده علی افتخاری حسام الدین ابطحی فروشانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  249 - a
  امین کلاه دوز ساسان امینیان دهکردی محمد فاضلی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  250 - Experimental and Numerical Investigation of Thickness on the Shrinkage and out of Roundness in Cylindrical Parts in Injection Molding Process
  ناتان جعفریان جم پیام سرائیان آیت اله عرب امین ابادی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  251 - Prediction of Mode II of Fracture Toughness in Laminate Composites
  افشین زین‌الدینی منصور علیزاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  252 - Study of the Frictional Surface Damage Using Acoustic Emission Method
  مهدی احمدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  253 - Analysis of Free Vibration Sector Plate Based on Elastic Medium by using New Version of Differential Quadrature Method
  مسلم محمدی مصطفی غیور علی فرج پور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  254 - Presenting a New Algorithm for Determining Optimal Replaceable Capacity of Conventional Power Plants by Renewable Power Plants Based on Monte Carlo Method
  هادی اکرمی شاهرخ شجاعیان مهری لطفی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  255 - Analytical and Numerical Investigation of Four-roll Bending
  محسن اشرفی وحید پورغریب شاهی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  256 - Bending analysis of composite sandwich plates using generalized differential quadrature method based on FSDT
  مصطفی یزدانی اعظم قاسمی محمد هدایتی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  257 - Experimental Study and FEM Simulation of the Effect of Significant Parameters in the Thixoforging of the Gearbox Cap
  امین کلاه دوز سلمان نوروزی محمد بخشی جویباری سید جمال حسینی پور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  258 - Fluid-structure Interaction Vibration Analysis of Vertical Cylindrical Containers with Elastic Bottom Plate Made of Functionally Graded Materials
  علی اکبر شفیعی مجتبی محزون احسان عسکری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  259 - Modeling and Crack-growth and Calculate First Intensity Factor with Ansys Software
  S.M. Hossein Mirgilani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  260 - Research in Sensibility of Locating Damage Methods Based on Mode Shape to Damage Intensity
  علی حسن زاده جعفر اسکندری جم سعید شکرالهی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  261 - Nonlinear Thermo-Mechanical Behaviour Analysis of Activated Composites With Shape Memory Alloy Fibres
  سیامک مقبلی محمدجواد محمودی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  262 - Propagation of Crack in Linear Elastic Materials with Considering Crack Path Correction Factor
  مهران مرادی مهدی پورمحمود
• Open Access Article
  • Abstract Page
  • Full-Text
  
  263 - Bending Sector Graphene Sheet Based on the Elastic Winkler-Pstrnak with the Help of Nonlocal Elasticity Theory Using Developed Kantorovich Method
  شهریار دستجردی مهرداد جبارزاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  264 - Stress Analysis of Magneto Thermoelastic and Induction Magnetic Filed in FGM Hallow Sphere
  حسن خادمی زاده علی قربان پور آرانی محمد سالاری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  265 - Nonlinear Finite Element Analysis of Thermoelastic Stresses of FGM Rotating Disk Considering Temperature-Dependency of Material Properties
  مهرنوش دمیرچلی محمد آزادی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  266 - Application of T-shape Friction T test for Ti-6Al-4V Alloy at Elevated Temperatures
  فرزان براتی یاسر نعمتی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  267 - Severe Impact on the Behavior of Energy Absorbing Cylindrical Base in Frontal Impact
  عبدالمجید کنی اکبر علی بیگلو
• Open Access Article
  • Abstract Page
  • Full-Text
  
  268 - A Comparative Study Between Analytical, Finite Element Method andthe Experimental Results in Wire Drawing of Copper
  محمد احمدپور حسن خادمی‌زاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  269 - Analysis of Bending and Buckling of Circular Porous Plate Using First-Order Shear Deformation Theory
  A.R. Yadegari Naeini Yadegari Naeini A. Ghasemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  270 - Buckling of Rectangular Functionally Graded Material Plates under Various Edge Conditions
  متین لطیفی فاطمه فرهت نیا محمود کدخدائی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  271 - Investigation of Porous Material Effects on Automotive Intake System Using Statistical Energy Analysis
  محمدحسن شجاعی فرد روح ا... طالبی مائده امیرپور ملا رضا احمدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  272 - Optimization of Reduction Settings and Inter-stand Tensions for Tandem Cold Mills using Genetic Algorithm
  فرشید آقاداوودی حسین گلستانیان نوید نگهبانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  273 - Fluidity Onset Analysis in FG Thick-Walled Spherical Tanks under Concurrent Pressure Loading and Heat Gradient
  منصور عسگری علی پرویزی شهریار علی کرمی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  274 - Prediction of Surface in Machining by Flat and Spherical Surface Tools
  محمد رضا موحدی امیر جدیری فیضی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  275 - Nonlinear Vibration Analysis of Composite Plates with SMA Wires, Considering Instantaneous Variations of the Martensite Volume Fraction
  محمد شرعیات سارا سمایی مجتبی مرادی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  276 - Multiple-objective Optimization of Serpentine Locomotion with Snake Robot by Using the NSGA
  هادی کلانی علیرضا اکبرزاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  277 - Numerical and Experimental Analysis of Forming Rectangular Copper Pipes by Successive Rolling of Round Pipe Filled With Bismuth
  علی بصیرت نیا محسن لوح موسوی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  278 - Analysis and Simulation of the Effect of Turbine Inlet Temperature on Thermodynamic Performance of the Water – Ammonia Combined Cycle
  سهیل محترم علی آقا میرجلیلی احمدرضا فقیه خراسانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  279 - Optimization of Microstructure and Mechanical Properties of Al-A360 Produced by Semi-Solid Casting
  امین کلاه دوز محسن لوح موسوی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  280 - Analyzing Effect of Friction on Spread and Budge in Flat Rolling by FEM Method
  محمود سلیمی امین فضیله
• Open Access Article
  • Abstract Page
  • Full-Text
  
  281 - Vibration Analysis of Thick Functionally Graded Beam under Axial Load Based on Two-Dimensional Elasticity Theory and Generalized Differential Quadrature
  حسین فراهانی فرزان براتی محمد نجاتی حمید باتمانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  282 - Optimization of Axisymmetric Extrusion Die Profiles
  حسن نحوی مهدی حسن زاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  283 - Differential Quadrature Method for the Analysis of Hydrodynamic Thrust Bearings
  مهدی زارع مهرجردی اصغر دشتی رحمت آبادی محمدرضا فاضل
• Open Access Article
  • Abstract Page
  • Full-Text
  
  284 - Nonlinear Vibration Analysis of an Euler-Bernoulli Beam Resting on a Nonlinear Elastic Foundation under Compressive Axial Force
  احمد مامندی محمدحسین کارگرنوین
• Open Access Article
  • Abstract Page
  • Full-Text
  
  285 - Nonlinear Vibration Analysis of a Cylindrical FGM Shell on a Viscoelastic Foundation under the Action of Lateral and Compressive Axial Loads
  احمد مامندی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  286 - A new low cycle fatigue lifetime prediction model for magnesium alloy based on modified plastic strain energy approach
  محمد آزادی غلامحسین فرهی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  287 - Static Analysis of Orthotropic Functionally Graded Material Cylinders with Finite Length by a Mesh-Free Method
  رسول مرادی دستجردی مهرداد فروتن سمیه عبداللهی بکتاش
• Open Access Article
  • Abstract Page
  • Full-Text
  
  288 - Improving of Microstructure and Mechanical Properties of Al-A356 Alloy with Compo-Casting Method
  اسماعیل دماوندی سلمان نوروزی سید محمود ربیعی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  289 - Identification of Crack Location and Depth in a Structure by GMDH- type Neural Networks and ANFIS
  منصور درویزه نادر نریمانزاده علی ملیحی دیزگاه مهدی جوادزاده رضا انصاری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  290 - Static and Dynamic Analysis of Bus Structure and Chassis of O-457
  ابوالفضل محبوبی شاد محسن اصفهانیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  291 - Experimental study of fracture mechanics in the aluminum matrix composites containing Fifteen percent silicon carbide particles
  محمد رنجبران محمد تقی نجفی مهدی اعطائی رسول امینی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  292 - Free and Forced Vibration Analysis of Functionally Graded Material Cylinders by a Mesh-Free Method
  رسول مرادی دستجردی مهرداد فروتن امین‌الله پوراصغر
• Open Access Article
  • Abstract Page
  • Full-Text
  
  293 - Fatigue Failure and Damage Analysis of an Anti-roll Bar Subjectedto Fatigue Experiments
  محمد شرعیات امیر گنجی‌دوست
• Open Access Article
  • Abstract Page
  • Full-Text
  
  294 - Evaluation of Tool Performance With Nanocrystalline Multilayer Coatings on the Machinability of Superalloy Inconel 718
  رسول مختاری همامی بهروز موحدی ایرج لیرابی مهدی بازرگان حقیقی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  295 - The new version of Differential Quadrature Buckling Analyses of FGM Rectangular Plates Under Non-Uniform Distributed In-Plane Loading
  محمد مهدی نجفی زاده رضا کاظمی مهرآبادی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  296 - The Effect of Electrical Discharge Machining Parameters on Alloy DIN 1.2080 Using the Taguchi Method and Optimal Determinant
  پویان صدر امین کلاه دوز علی افتخاری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  297 - Optimization of Flash, Billet Dimensions and Friction Factor in Closed Die Cold Forging Process
  مهدی ظهور حسین شاهوردی امین تفکری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  298 - Investigation and Simulation of Wire Non-Asymmetric Rolling Process
  علی پرویزی بهزاد پسوده کارن ابری نیا
• Open Access Article
  • Abstract Page
  • Full-Text
  
  299 - Simulation of Human Foot Mechanism with a Degree of Freedom Motion
  دامون بختیاریان هادی همایی امین ملکی زاده مراد شهبازی تک آبی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  300 - Use of Ansoft to Model a Slice Magnetic Bearing
  محمد اسماعیلی ادبی شهربانو فرخنده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  301 - Numerical Study on Effect of Bilinear Pressure Path on Corner Filling in Hydroforming of Tube in Box-Shape Die
  محسن لوح موسوی میثم شهبازی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  302 - Optimization of Material Removal Rate in Electrical Discharge Machining Alloy on DIN1.2080 with the Neural Network and Genetic Algorithm
  مسعود عظیمی امین کلاه دوز سید علی افتخاری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  303 - Path Planning of a 3 DOF Servo-Hydraulic Mechanism Using Genetic Algorithm
  فرشید آقاداوودی شهرام لنجان نژادیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  304 - Prediction of Work-Piece Constitutive Equation in Hot Rolling of Strip
  سحر سلیمی سمیرا سلیمی امیرحسین ادیبی سده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  305 - Study of Permanent Magnet Bearings and their Stiffness
  محمد اسماعیلی ادبی شهربانو فرخنده مجید رشیدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  306 - Numerical Determination of the Forming Limit Diagram for 304 Stainless Steel Based on Phase Change in Deep Drawing Process
  مسعود نصر اصفهانی مهران مرادی فرهاد حاجی ابوطالبی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  307 - Numerical and Experimental Investigation of Cold orBital Forging of a 16MnCr5 Alloy Spur Bevel Gear
  سعید بهشتیان مسگران محمد علی صادقی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  308 - Buckling Analysis of Cylindrical Grooved Shell under Axial Load Discs
  امین رحمت نژاد محمد مهدی نجفی زاده حمید محسنی منفرد
• Open Access Article
  • Abstract Page
  • Full-Text
  
  309 - Experimental Measurement of Dynamic Viscosity of CeO2-EG at Different Concentrations and Temperatures and Proposing a New Correlation
  محمد اکبری امیر حسین سعیدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  310 - Virtual Reality Exposure Therapy for the Treatment of Darkness Phobia
  مجید اسلامی حمیدرضا حاجی میرزاعلیان افسانه کرباسی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  311 - Analysis of Fatigue Cracks of Diesel Engines Cylinder Heads using a Two-Layer Viscoplasticity Model and Considering Viscousity Effects
  حجت عاشوری بابک بهشتی محمد رضا ابراهیم زاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  312 - Longitudinal Wave Propagation Analysis of Stationary and Axially Moving Carbon Nanotubes Conveying Fluid
  سهیل اویسی حسن نحوی داود طغرایی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  313 - Numerical Simulation of Impact of Low Velocity Projectiles With Water Surface
  نجمه خضرائیان ناصر دشتیان گرامی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  314 - The Effect of Volume Fractions on Hole Stress Concentration in Composite Lamina Subjected to Matrix Plasticity
  پژمان تقی پور بیرگانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  315 - Passive Non-Prehensile Manipulation of a Specific Object on Predictable Helix Path Based on Mechanical Intelligence
  عبدالله باجلان عادل اکبری مجد
• Open Access Article
  • Abstract Page
  • Full-Text
  
  316 - Simulation and Control of Rotational Vibration of Sprayer Boom Using a Novel Suspension System
  رضا ابراهیمی مصطفی غیور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  317 - Experimental and Numerical Investigation of Lateral Loading of Thin –Walled Tube with Different Indenter
  سجاد دهقان پور حامد خلیلی کیوان حسینی صفری یونس محمدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  318 - Investigation of Cutting Forces Superalloy Inconel 718
  سید مسعود بدخشیان مجید کریمیان سید علی افتخاری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  319 - Numerical Computation of Rolling Resistance Based on the Result of Tire/Road Static Contact Analysis
  حسین گلبخشی مسلم نامجو
• Open Access Article
  • Abstract Page
  • Full-Text
  
  320 - Design, develop and simulation of Go-kart
  احمد کشاورزی علی اکبر صالحی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  321 - Modeling and modal analysis to oscillations of IPMC cantilever beam and simulating as an actuator
  آرش رجایی علی مختاریان مصطفی پیرمرادیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  322 - The Effect of Geometrical Parameters of Cylindrical Composite Lattice Structures on Buckling Behavior
  علی لطیفی رستمی رضا اکبری آلاشتی امین کلاه دوز
• Open Access Article
  • Abstract Page
  • Full-Text
  
  323 - Vibration and Buckling of Double-Graphene Sheet-Systems with an Attached Nanoparticle Based on Classical and Mindlin Plate Theories Considering Surface Effects
  محمد هاشمیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  324 - Sensitivity Analysis of Frequency Response of Atomic Force Microscopy in Liquid Environment on Cantilever's Geometrical Parameters
  مهرنوش دمیرچلی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  325 - Dynamic Stability of Nano FGM Beam Using Timoshenko Theory
  شهاب صفاری محمد هاشمیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  326 - Static and Dynamic Analyze of the an Aluminum Pad used as Portable Roadway
  مجتبی رضایی احمد محمودی ابوذر اسحقی اسکوئی رضا حسینی ثانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  327 - Modeling & Comparison of Mechanical Behavior of Foam Filled & Hollow Aluminum Tubes by LS-DYNA & Introducing a Neural Network Model
  میثم رستمی مجتبی حسنلو مصطفی سیاوشی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  328 - Modeling of the Beam Discontinuity with Two Analyses in Strong and Weak Forms using a Torsional Spring Model
  مصطفی مستان آبادی علی علی جانی ابوالفضل درویزه فاطمه متقیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  329 - Experimental Study of the Voltage and Number of the Coil Rounds in Electromagnetic Forming Process of the V shape Aluminum sheets
  سجاد نادیان برسیانی احمد کشاورزی امین کلاه دوز
• Open Access Article
  • Abstract Page
  • Full-Text
  
  330 - The Parameters Investigation and Hardness Optimization of A380 Aluminum Alloy produced by Mechanical Vibrator
  سعید احترامیان حقیقی امین کلاه دوز مجید کریمیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  331 - Investigating the effects of geometry and material on acoustic characteristics of hospital rooms
  Mehdi Salehi Rozita Salehi
  10.71939/jsme.2024.1103964
• Open Access Article
  • Abstract Page
  • Full-Text
  
  332 - Small signal stability analysis of dynamic behavior of gas turbine power plant with secondary control loop in electric power system
  Ghazanfar Shahgholian Majid Moazaami Mohammad Amin Honarvar
  10.71939/jsme.2024.1104918
• Open Access Article
  • Abstract Page
  • Full-Text
  
  333 - Design and structural analysis of buckling and prestressed modal of an isogrid conical shell under mechanical and thermal loads
  Behrooz Shahriari Mahdi Sharifi Hassan Izanlo
  10.71939/jsme.2024.1105736
• Open Access Article
  • Abstract Page
  • Full-Text
  
  334 - Investigation the weld quality characterizations and temperature field in laser welding of dissimilar Nickle-base alloy Inconel 600 and duplex stainless steel
  Ahmad Soleimani Mohammad Akbari Arash Karimipour Amir Homayoun Meghdadi Reza Nosouhi
  10.71939/jsme.2024.1119530
• Open Access Article
  • Abstract Page
  • Full-Text
  
  335 - Investigating the effect of post-weld heat treatment on the corrosion properties of the explosive welded three-layer joint of Cu/Al/Cu
  Heydar Ali Zamani Mohammad Reza Khanzadeh Ali  Bakhtiari Hossein Paydar
  10.71939/jsme.2024.1119738
• Open Access Article
  • Abstract Page
  • Full-Text
  
  336 - An overview of Friction stir processing of magnesium alloys reinforced by ceramic additive: Microstructure and mechanical properties
  Masoud Kasiri-Asgarani
  10.71939/jsme.2024.1120195
• Open Access Article
  • Abstract Page
  • Full-Text
  
  337 - A Review on the Classification of Operating Modes in Microgrid Systems
  Somaye Yaghoubi Majid Dehghani Majid Moazzami Mohamad Ali Zanjani Mohamadreza Moradian
  10.71939/jsme.2023.1126505
• Open Access Article
  • Abstract Page
  • Full-Text
  
  338 - Design and manufacturing of a fully automated thermoforming machine for the production of confectionary boxes
  Mahmood  Bizhani Mostafa Pirmoradian Reza Abedinzadeh
  10.71939/jsme.2024.1126825
• Open Access Article
  • Abstract Page
  • Full-Text
  
  339 - Vibration and Dynamic behavior of Multi-Layer Sandwich Composite Piezoelectric Micro Beam Using Higher-Order Elasticity Theory
  Mehrdad Soltani Javad Jafari Seyed Ali Galehdari Rasoul Tarkesh Esfahani Mohamad  Shahgholi
  10.71939/jsme.2024.1127451
• Open Access Article
  • Abstract Page
  • Full-Text
  
  340 - Creep analysis in two functionally graded rotating gears
  Milad  Kharati Asl Ali akbar lotfi Saeed Daneshmand
  10.71939/jsme.2024.1130580
• Open Access Article
  • Abstract Page
  • Full-Text
  
  341 - Optimization of Leg Mechanism and PD Control for Efficient Quadruped Robot Locomotion
  Mobin Salehi Arash Emami Mojtaba Norozi
  10.71939/jsme.2024.1186910
• Open Access Article
  • Abstract Page
  • Full-Text
  
  342 - Thermoeconomic analysis of a novel multi generation system combined with compressed air energy storage and sulfur dioxide-based ejector cooling system
  Ali Eyvazi
  10.71939/jsme.2024.1188189
• Open Access Article
  • Abstract Page
  • Full-Text
  
  343 - Nonlinear radial vibration of single-walled carbon nanotubes with using numerical methods
  Zahra Azimzadeh Alireza Fatahi-Vajari
  10.71939/jsme.2024.1190493
• Open Access Article
  • Abstract Page
  • Full-Text
  
  344 - Free axial vibration of cracked nanotubes incorporating scale effects using doublet mechanics
  Alireza Fatahi-Vajari Zahra Azimzadeh
  10.71939/jsme.2024.1193861
• Open Access Article
  • Abstract Page
  • Full-Text
  
  345 - Analysis and simulation of small signal stability of parallel connection of virtual synchronous generators in a microgrid system
  Ghazanfar Shahgholian
  10.71939/jsme.2024.1194445
• Open Access Article
  • Abstract Page
  • Full-Text
  
  346 - Crack behavior investigation and crack opening stresses for plane stress, plane strain and 3D cases
  Rahmat Ghadimi Chermahini Majid Jabbari
  10.71939/jsme.2024.1195171