Study of the Notching HSS Rolls by CBN Tool using RSM Method
Subject Areas : Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering
محسن
جعفری دینانی
1
(دانشجوی کارشناس ارشد، گروه مهندسی مکانیک، واحد خمینی شهر، دانشگاه آزاد اسلامی، خمینی شهر، ایران.)
امین
کلاه دوز
2
(استادیار، دانشکده مهندسی مکانیک، دانشگاه آزاد اسلامی، واحد خمینی شهر)
سید علی
افتخاری
3
(استادیار- معاونت پژوهش و فناوری اطلاعات- دانشگاه آزاد اسلامی واحد خمینی شهر)
Keywords: Hot rolling, RSM, HSS roler, Bar, Notching,
Abstract :
One of the biggest problems of artisans , is notching the high speed steel roller is due to the inability to do this work, become high speed steel roller bearings are disposable. One of the biggest problems of artisans , is notching the high speed steel roller is due to the inability to do this work, become high speed steel roller bearings are disposable.When the roller is placed on the production line, because of the retained austenite make it very hard. High speed roller used in this study is barely above 70 Shc. Our goal is to obtain the optimum machining parameters that it requires a high number of tests that are practically impossible. So in order to achieve optimal machining parameters with the lowest test, RSM method in Minitab software was used. CBN tools performed well in all tests and succeeded with the best cutting speed 25 m/min, 0.05 mm feed and 0.05 mm depth of cut at the time of 1080 seconds, in notching one caliber.