WiFi Based Massager Device with NodeMCU Through Arduino Interpreter

Subject Areas : Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering

Ata Jahangir Moshayedi ¹ ( School of Information Engineering, Jiangxi University of Science and Technology,No 86, Hongqi Ave, Ganzhou, Jiangxi,341000, China )
Mohadeseا Sadat Hosseini ² ( Department of Medical Engineering, Ragheb Esfahani Higher Education Institute, Isfahan, Iran )
Farzaneh Rezaee ³ ( Department of Medical Engineering, Ragheb Esfahani Higher Education Institute, Isfahan, Iran )

Received: 2018-11-08 Accepted : 2019-12-08 Published : 2019-12-14

Keywords: Ip, massager device, Arduino, slimming belt, NODEMCU,

Abstract :

According to the claim of electrical and shocker makers, creating artificial spasms have a duty of such sport activates for a person and leads to burn calories, weight loss and size. Of course, this function hasn’t been proven yet. Slimming belt and massage devices are using 2 mechanism containing vibration and shaking the area and creating heat, which causes temporary relocation and tiny of subcutaneous fat and slimming belt leads to decrease size. Vibration devices can be categorized in to 2 groups: First: topical belts and massagers, and second: vibration plates or whole body vibrator. In this project which has done with the aim of massager devices, one simple with the small dimensions and in order to controlling through wifi, has designed and evaluated, which result of this study, is demonstrating the successful design and making mentioned device has capability to use in therapeutic halls. Moreover, with attention to the similar structure to the slimming belts, it can be used in large dimension for slimming belts.

References:

[1] J.A. Anderson, E.O. Otun, and B.J. Sweetman, “Occupational hazards and low back pain,” Rev Env. Heal., vol. 7, No. 1–2, pp. 121–160, 1987.

[2] M.J. Griffin, Handbook of human vibration. Academic press, 2012.

[3] R. Recker, C. Rubin, D. Cullen, D. Belongia, J. Ryaby, and K. McLeod, “Non-invasive biomechanical intervention for the prevention of post-menopausal osteopenia.,” in journal of bone and mineral research, 1997, vol. 12, pp. T561–T561.

[4] "Vibration Plate Machines May Aid Weight Loss and Trim Abdominal Fat", ScienceDaily, 2017. [Online].

Available:https://www.sciencedaily.com/releases/2009/05/090508045323.htm.

[Accessed: 2- MAY- 2018].            

[5] S. Spiliopoulou, I. Amiridis, G. Tsigganos, D. Economides and E. Kellis, "Vibration Effects on Static Balance and Strength", 2017.

[6] M. Cardinale and J. Wakeling, “Whole body vibration exercise: are vibrations good for you?”, Br. J. Sports Med., Vol. 39, No. 9, pp. 585–589, 2005.

[7]"NodeMCU,https://hackaday.io/projects?page=2&tag=NodeMCU, [Online]. Available:  [Accessed: 2- MAY- 2018].  

[8] " A. J. Moshayedi and D. C. Gharpure, “Evaluation of bio inspired Mokhtar: Odor localization system,” in 2017 18th International Carpathian Control Conference, ICCC 2017, 2017.

[9] O. T. Esfahani and A. J. Moshayedi, “Accuracy of the Positioning Systems for the Tracking of Alzheimer’s Patients-A Review,” Int. J. Appl. Electron. Phys. Robot., vol. 2, no. 2, pp. 10–16, 2014.

 [10] A. Kolahdooz, S. Nourouzi, M. Bakhshi and S.J. Hosseinipour S.J. Hosseinipour, (2016) “Experimental investigation of the effect of temperature in semisolid casting using cooling slope method”, Process of International Mechanical Engineering; Part E, Journal of Process Mechanical Engineering, Vol. 230, No. 4, pp. 316-325.

[11] A. Kolahdooz and M. Shakeri, (2010) “A New BLDC Motor for Propulsion Application”, International Review of Electric Engineering, Vol. 5, No. 5, pp. 1872-1878.

[12] A.J. Moshayedi and D. Gharpure, “Implementing Breath to Improve Response of Gas Sensors for Leak Detection in Plume Tracker Robots,” In Proceedings of the Third International Conference on Soft Computing for Problem Solving, 2014, pp. 337–348.

[13] A.J. Moshayedi and D.C. Gharpure, “Priority based algorithm for Plume tracking Robot,” In nternational symposium on physics and technology of sensors, 42AD, pp. 40.

[14]      A.J. Moshayedi, S.S. Fard, L. Liao, and S.A. Eftekhari, “Design and Development of Pipe Inspection Robot Meant for Resizable Pipe Lines,” Int. J. Robot. Control, vol. 2, no. 1, p. 25, 2019.

[15] Gong, C., Qi, L., Heming, L., Karimian, H., & Yuqin, M. (2017). Spatio-temporal simulation and analysis of regional ecological security based on LSTM. ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 4, 153

[16] Karimian, H., Li, Q., Li, C., Fan, J., Jin, L., Gong, C., Mo, Y., Hou, J., & Ahmad, A. (2017). Daily estimation of fine particulate matter mass concentration through satellite based aerosol optical depth. ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 4, 175

[17] Rahimi, Hamed, Reza Mozafarinia, Reza Shoja Razavi, Ebrahim Paimozd, and Akbar Hojjati Najafabadi. "Processing and Properties of GPTMS-TEOS Hybrid Coatings on 5083 Aluminium Alloy." Advanced Materials Research, Vol. 239, (2011), pp. 736-742.

[18] Hojjati Najafabadi, Akbar, Reza Shoja Razavi, Reza Mozaffarinia, and Hamed Rahimi. "A new approach of improving rain erosion resistance of nanocomposite sol-gel coatings by optimization process factors." Metallurgical and Materials Transactions A 45, no. 5 (2014) 2522-2531.