List of Articles Alloy

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Effect of different sizes of balls on crystalline size, strain, and atomic diffusion on Cu-Fe nanocrystals produced by mechanical alloying
  Mohammad Reza Vaezi Seyed Hesam Mir Shah Ghassemi Ali Shokuhfar
  10.1186/2251-7235-6-29
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Synthesis of titanium-silver bimetallic nanoparticles by thermal plasma method
  Sahar Sheini Shahrooz Saviz Amir Hossein Sari
  10.30495/jtap.162210
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Calculation of energy lost by radiation and convection during laser welding of TA6V titanium alloy
  Soumaya Lemkeddem Fethi Khelfaoui Oumelkheir Babahani
  10.1007/s40094-018-0288-x
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Calculating formation range of binary amorphous alloys fabricated by electroless plating
  Bangwei Zhang Shuzhi Liao Xiaolin Shu Haowen Xie
  10.1007/s40094-016-0210-3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Micromagnetic analysis of Heusler alloy-based perpendicular double barrier synthetic antiferromagnetic free layer MTJs
  Bahniman Ghosh Kshitij Dwivedi
  10.1007/s40094-015-0181-9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - تأثیر پارامترهای فرآیند لیزر بر ویژگی‌های هندسی سوپرآلیاژ آلومینیومی Inconel738 با روکش لیزری
  bita mottaghi golshan mohammad mehdi Hadavi monireh ganjali
  10.30495/jptc.2021.20404
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Electrocatalytic properties of platinum and it's binary alloy with vanadium in oxygen reduction reaction(ORR)
  Mohammad Yari Sajjad Sedaghat Sherehjini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Synthesis of carbon nano structures on Fe/Cu/AI and Al/Steel by thermal chemical vapour deposition method
  F. Bisepar Z. Haghparast S. A. Khorrami S. Moradi R. Cheraghali H. Aghaie
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Modeling Movable Shading Device in Shiraz Climate for Energy Consumption (Inspired by The Sunflower Movement Algorithm)
  Zahra Yarmahmoodi Hamed Moztarzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Effect of Ta Addition on Microstructure and Hot Oxidation Resistance of AlCrCoNiY-xTa High-Entropy Alloy Consolidated by Spark Plasma Sintering
  Babaei Rouchi A Salemi Golezani A Hadavi S. M. M
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Investigation on Hot Tearing Susceptibility of A201 Aluminum Alloy in Different Ingate Velocities and Molds
  M. H Ayandeh A. A Kashi M. Ghambarian H. Karimi A. Mootabha A. Khoyini E.M. Boushehri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - The Influence of Oxidized Interlayer on the Adhesion of Bioactive Cao-P2o5-Tio2-Na2o Glass Ceramic Coating to the Titanium Substrate
  Sh. Honarvar B. Eftekhari Yekta
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - The Comparison of Martensitic Transformation Sequences Between Aged Ti-50.6 and Ti-51.0 at.% Ni Alloys by in-situ SEM Observations
  B. Karbakhsh Ravari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Investigation on the Simultaneous Effects of Zn Additions and Critical Ingate Velocity on the Hot Tearing Susceptibility of A356 and A206 Aluminum Alloys
  M. Ghambarian S.M.A. Boutorabi F. Shahri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - The Effect of Cooling Rate on the Solutionizing of IN718 Superalloy Produced via Selective Laser Melting (SLM) Method
  H. H. Dastgerdi M. O. Shabani Y. Shajari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - The Effect of the Amount of Ferrous Sulfate in the Electrolyte on the Hardness of the Ni-Fe Alloy Coating Generated by Electrical Deposition Method
  A Aghajafari M Noghani M Saghafi B Bostani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - An Investigation of the Fatigue Corrosion Behavior of Al 6063-T6 Alloy under Seawater Influence
  R. Abdollahi M. Hajisafari A. Zare Bidaki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - The Effect of Heat Treatment on the Microstructural and Superelastic Behavior of NiTi Alloy with 58.5 wt. % Ni
  M. Paryab
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Comparison of the Annealing Heat-Treated Microstructure and Hardness of the AA2024-T4 and AA6061-T6 Alloys
  A Anbarzadeh H Sabet A Granmayeh Urmia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Improving the Tribological Behavior of Commercially Pure Titanium Using TIG Surface Alloying
  A. Vahedi Nemani M. Ghaffari N. Rasekh Saleh H. Tazikeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Thermal Analysis and Microstructural Evaluation of Inconel 738LC Superalloy Gas Turbine Blade
  Rayatpour M Lalegani Z
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Studies on the Microstructure Modification and Tribological Characteristics of Cast Al-Si Eutectic Alloys
  V Abouei Mehrizi O Bayati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Prediction Micro-Hardness of Al-based Composites by Using Artificial Neural Network in Mechanical Alloying
  R, M Babaheydari S, O Mirabootalebi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Evaluation Microstructure and Hardness of the Fe-Cr-C Hardfacing Alloy with Cr/C=6 Ratio
  H Sabet
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Investigating the Porous Coating Produced on 6061 Aluminum Alloy in Sulfuric Acid Electrolyte at Different Temperatures
  M Razazi Boroujeni H. F. M Alyazee
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - A Brief Study of Magnesium-Zinc Alloy Scaffolds Performance
  Z. S Seyedraoufi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Physical and Numerical Investigations of Gas Turbine Blades Failure
  H.R. Faridi A. Momeni M. Mohammadpour V. Sarfarazi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - A Comprehensive Review of Thermal Barrier Coatings Microstructure with Different Platinum-Modified Aluminide Bond Coats
  A Rabieifar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Review of Smart Metallic Materials Classification
  H Sabet B Karbakhsh Ravari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Optimizing Friction Stir Welding Process for Enhancing Strength and Hardness using Taguchi Multi-Objective Function Method
  Sajjad Khaki Ali Heidari Amin Kolahdooz
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - Optimization of AZ61 Mg Alloy Resistance Spot Welding using Response Surface Method
  Afshin Lotfi Davood Afshari Zuheir Barsoum
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - Preform and Process Design of Ti-6Al-4V Compressor Blade using Equipotential Lines and 3D FE Simulation
  M. Soleimanzadeh M.M. Fallah
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Investigating the Effects of Expansion Equal Channel Angular Extrusion (Exp-ECAE) on Dynamic Behavior of AA7075 Aluminum Alloy
  J. Shahbazi Karami S. Sepahi-Boroujeni Mohsen Khodsetan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - Effect of Welding Parameters on Microstructure and Mechanical Properties of Friction Stir Spot Welded of Titanium Alloy TiAl6V4
  Saeid Nader Masoud Kasiri- Asgarani kamran amini Morteza Shamanian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Application of the Relevance Vector Machine for Modeling Surface Roughness in WEDM Process for Ti-6Al-4V Titanium Alloy
  Abolfazl Foorginejad Nader Mollayi Morteza Taheri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Investigation of The Effect of Notch Tip Radius on Fracture Energy of Charpy in 7075 Aluminium Alloy
  Ali Hossein zadeh Mohammad Reza Maraki Mohsen Sadidi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - Implementation of the Quasi-Brittle Damage Model for 2024 Aluminum Alloy under Periodic Loading
  Sadegh Ghorbanhosseini saeed yaghoubi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Microstructure Investigation and Mechanical Properties of Resistance Upset Butt Welded Ti-6Al-4V Alloy
  Mahmood Sharifitabar
  10.30495/admt.2020.1891939.1170
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - The Effect of Sintering and Compaction Conditions on the Microstructure and Properties of AZ31 Magnesium Alloy
  amin saghafi Seyed Ehsan Eftekhari Shahri Hossein Jamshidi Mohammad Kazem Salari Razieh Khoshhal
  10.30486/admt.2022.1942847.1328
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Behavior of Lightweight Smart Sandwich Panels Subjected to Tensile and Bending Loads- An Experimental Study
  sameera Khalili s. Mohammad Khalili Reza Eslami Farsani Puneet Mahajan
  10.30486/admt.2022.1937484.1302
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - Leaching of Metals from Dental Silver Alloy Wastes
  Razieh Khoshhal Hojjat Mirzaei-Ghasabeh Mohammad Asadrokht Ali Hosseinzadeh
  10.30486/admt.2022.1934796.1297
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - Feed Stock Fabrication of AISI 4605 Steel for Fused Deposition Modeling and Sintering and Designing of Its Extruder Mechanism
  Amir Rahimi Jamal Zamani
  10.30486/admt.2023.1961907.1358
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - Nd:YAG laser processing of thick NiTi wires to locally alter ‎transformation properties towards achieving multiple memory ‎shape memory alloys
  Amin  Alipour Mahmoud Kadkhodaei Ehsan  Foroozmehr
  10.30486/ADMT.1403.873806
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - Influence of Notch Depth-to-Width Ratios on J-Integral and Critical Failure Load of Single-Edge Notched Tensile Aluminium 8011 Alloy Specimens
  C.S Sumesh P.J Arun Narayanan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - Application of the GTN Model in Ductile Fracture Prediction of 7075-T651 Aluminum Alloy
  S.F Hosseini S Hadidi-Moud
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Shape- Dependent Term Investigation of Khan- Liu Yield/ Fracture Criterion as a Function of Plastic Strain for Anisotropic Metals
  F Farhadzadeh M Tajdari M Salmani Tehrani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - Investigation of corrosion behaviour of X70 microaloy steel in acidic environment in one molar sulfuric acid solution in the presence of benzomidazole and methyl benzomidazole
  مهدی بروجردنیا Mohammad Yazdizadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - Behavior and mechanical properties of shape memory alloys in smart materials and its application in various industries
  Mahdi Rezvani Tavakol
• Open Access Article
  • Abstract Page
  • Full-Text
  
  49 - Numerical and Experimental Analysis of Coil’s Number of Rounds and Voltage in Electromagnetic Sheet Forming of Aluminum Alloy 1050
  Sajjad Nadian Bersiani Ahmad Keshavarzi امین کلاهدوز
• Open Access Article
  • Abstract Page
  • Full-Text
  
  50 - Investigating the effect of flash gutter geometry on material flow and defect formation in cold forging of AA 3003 Aluminum alloy
  milad Bandad Mehrdad Ozve Aminian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  51 - Investigation on effect of die geometric parameters on equal channel angular extrusion of bulk nanostructured magnesium alloy AZ31
  Mohammad Farzanfar Ali Heidari Mohsen Loh-mousavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  52 - Investigation on the effect of the honeycomb core orientation to lateral plates on the energy absorption capacity of the sandwich panel used in the elevator hole
  amir ghiasvand hossein ahmadi rashid soran hasanifard
• Open Access Article
  • Abstract Page
  • Full-Text
  
  53 - Experimental investigation of microstructure of aluminum alloy in ECAP process with comparison of two round and square cross sections
  Mehdi Rafiei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  54 - The effect of rounds of the Friction Stir Welding tool (FSW) in determining of fatigue life of T6-7075 aluminum alloy
  Mohamad Jafar Ostad Ahmad Ghorabi Reza Samieifard
• Open Access Article
  • Abstract Page
  • Full-Text
  
  55 - Multi-objective Optimization of Turning of Titanium Alloy Under Minimum Quantity Lubrication
  Satish Chinchanikar Jitendra Katiyar Omkar Manav
  10.22094/joie.2021.1937743.1886
• Open Access Article
  • Abstract Page
  • Full-Text
  
  56 - Crystallization Kinetics Study in Al87Ni10La3 Amorphous Alloy
  Amir Rofigar Haghighi Akbar Heidarpour Mohsen Eshaghpour Soorani Mehdi Mansouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  57 - Using design of experiments approach and simulated annealing algorithm for modeling and Optimization of EDM process parameters
  Masoud Azadi Moghaddam Farhad Kolahan Meysam Beytolamani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  58 - FSP pass number and cooling effects on the microstructure and properties of AZ31
  Akbar Heidarpour Saeed Ahmadifard Nadia Rohania
• Open Access Article
  • Abstract Page
  • Full-Text
  
  59 - An investigation on Al6061/TiB2 nano composites production through Mechanical Alloying route and their corrosion behavior
  Iman ebrahimzadeh Farhad Gharavi G.H. Borhain
• Open Access Article
  • Abstract Page
  • Full-Text
  
  60 - Investigation of mechanical properties and fracture surfaces of 5086 Al-based alloy processed by equal channel angular pressing in different routes
  Seyed Elias Mousavi Mohammad Hossein Khaleghifar Farshid Ahmadi Mahmood Meratian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  61 - Fatigue and corrosion fatigue properties of Ti-6Al-4V implant grade titanium alloy in Ringer solution
  Mahmoud Hajisafari Arman Zare Bidaki Saeid Yazdani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  62 - Thermodynamic analysis of nanocrystalline solid solution formation in the W-Co-Si ternary system by mechanical alloying
  Majid zarezadeh Reza Beygi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  63 - Determination of solution temperature in an ex-service Ni-based turbine blade
  Mohammad Shademani Mohamadreza Rahimipour Ali Sedaghat Mohammad Farvizi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  64 - Prediction of forging force and barreling behavior in isothermal hot forging of AlCuMgPb aluminum alloy using artificial neural network
  hamidreza Rezaei Ashtiani p shahsavari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  65 - Estimation of the mean grain size of mechanically induced Hydroxyapatite based bioceramics via artificial neural network
  Mohammad Fahami Majid Abdellahi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  66 - Production and Characterization of Nano Crystalline Fe85Si10Ni5 Soft Magnetic Alloys by Mechanical Alloying
  Arash Dezhsetan Ali Saidi Reza Ebrahimi-Kahrizsangi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  67 - The Study of High Temperature Oxidation behavior of Different Microstructures of HVOF Thermally Sprayed Coatings
  Behnaz Saeedi Alireza Rouhaghdam
• Open Access Article
  • Abstract Page
  • Full-Text
  
  68 - A study on the sub-structure and mechanical properties of friction stir processed AA 6061-T6 joints with ultra-fine grained structure
  Ali Salemi Golezani M. Esmaily N. Mortazavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  69 - The Weldability Evaluation of Dissimilar Welds of AISI 347 Stainless Steel to ASTM A335 Low Alloy Steel by Gastungesten Arc Welding
  Iman Hajiannia Morteza Shamanian Masoud Kasiri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  70 - The Effects of Mould Materials on Microstructure and Mechanical Properties of Cast A356 Alloy
  Musa Yıldırım Dursun ÖZYÜREK
• Open Access Article
  • Abstract Page
  • Full-Text
  
  71 - Synthesis and thermal stability of nanocrystalline Mg-6Al-1Zn-1Si alloy prepared via mechanical alloying
  Roholamin Sedighi Mohammad Rajabi Seyed Mahmood Rabiee
• Open Access Article
  • Abstract Page
  • Full-Text
  
  72 - Silicothermic production and characterization of FeSiNi/SiO2 Magnetic nanocompsite via mechanical alloying
  Ghazal Sharifian asl Ali Saidi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  73 - Plastic deformation of 7075 Aluminum Alloy using Integrated Extrusion-Equal Channel Angular Pressing
  mehdi shaban sahel gozalzadeh beitallah eghbali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  74 - Modeling and optimization of precipitation hardening heat treatment factors of Al2024 alloy using a two-level full factorial design
  Maryam Moazeni Ali Ashrafi Ali Zeinal-Hamadani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  75 - Addition of Mo in the Zn based alloy coating in the citrate solution and investigation of its corrosion behavior
  Mahdi Omidi Mahdi Yeganeh Arash Etemad Mohammad Reza Rostami Mohammad esmaeil Shafie
• Open Access Article
  • Abstract Page
  • Full-Text
  
  76 - Friction Stir Welding of Al 2024 with Al 7075 Alloys and evaluate its structural and mechanical properties
  Sayedeh Zahra Anvari Saeed Rohani Mojarad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  77 - The study of the elements migration from the matrix phases to the grain boundary effects on the creep rupture of G-NiCrTi28W alloy at elevated temperature
  Mehrdad Rafiei Ehsan Saebnoori
• Open Access Article
  • Abstract Page
  • Full-Text
  
  78 - Fabrication of anodic aluminium oxide template and the generation of magnetic Co nanowires within it
  masoud soltani Reihane Aliramezani saeid akhavan Zeinab Erfani Gahrouei mohammad noormohammadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  79 - Study the effect of the friction stir process on the microstructure and mechanical behavior of the AZ31 as-cast alloy joint
  Amir Rezaee Iman Ebrahimzadeh Farhad Gharavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  80 - The Effect of Magnesium on the Microstructure and Stress Rupture Properties of Hastelloy X Supealloy
  Masumeh seifollahi Afagh panahi moghaddam seysd Mahdi Abbasi seyed Mahdi ghazi mir saeed
• Open Access Article
  • Abstract Page
  • Full-Text
  
  81 - Tribological Properties of Al2024-2wt.%TiO2 Nanocomposite Produced by Mechanical Alloying and Hot-Pressing
  Hamid Ashrafi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  82 - Evaluation of Microstructure and Tensile Behavior of Fine-Grained AZ61 Alloy Tube Processed by Severe Plastic Deformation
  Milad AAli Ghader Faraji Mohammad Reza Sadrkhah Ali Fata Mohammad Jafar Hadad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  83 - Age-Hardening Behavior and the Related Changes in a Silver-Copper-Palladium Alloy
  Morteza Hadi Iman Ebrahimzadeh Omid Bayat
• Open Access Article
  • Abstract Page
  • Full-Text
  
  84 - Optimization of Advanced Square Wave AC-GTAW Parameters to Improve Localized Corrosion Resistance of AA6082-T651 Aluminum Welds
  mohammad Tabeahmadi Reza Dehmolaei Sayed Reza Alavi Zaree
• Open Access Article
  • Abstract Page
  • Full-Text
  
  85 - Utilization of Microalloying with Rare Earth Elements and Hot Extrusion for Remarkable Grain Refinement and Enhancement of Mechanical Properties of as-Cast Magnesium Alloy
  Hooman Abedi Massoud Emamy Hamed Mirzadeh Jafar Rassizadehghani M. Ra'ayatpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  86 - Fabrication of Al7075-MWCNT Composite Powder by Recycling Aluminum Alloy Chips Via High Energy Milling and Alloying
  Parisa Fekri Dolatabad Vahid Pouyafar Ramin Meshkabadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  87 - The Effect of Annealing Temperature on the High Temperature Deformation Behavior of Ti-5Al-4.2V-0.8 Mo-2Fe α/β Titanium Alloy
  Maryam Morakabati Peyman Ahmadian Parnia Parvizian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  88 - Effects of Equal Channel Angular Pressing (ECAP) Process with an Additional Expansion-Extrusion Stage on Microstructure and Mechanical Properties of Mg–9Al–1Zn
  Mahnoush Rassa Geonik Azadkoli Mohammad Eftekhari Ali Fata Ghader Faraji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  89 - Investigating the Effects of Boron and Zirconium on the High-Temperature Fatigue Behavior of Nimonic 105 Super Alloy
  Zahra Asghary Masumeh Seifollahi Maryam Morakabati Seyed Mahdi Abbasi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  90 - Mechanical Alloying and Spark Plasma Sintering of Equiatomic AlCoCrFeMnNi High Entropy Alloy
  Farhad Abdi Hossein Aghajani Shahin Khameneh Asl
• Open Access Article
  • Abstract Page
  • Full-Text
  
  91 - Effect of Fluoride Coating on the Degradation of Mg-Based Alloy Containing Calcium for Biomedical Applications
  Abouzar Rezaei-Baravati Masoud Kasiri-Asgarani Hamid Reza Bakhsheshi-Rad Mahdi Omidi Ebrahim Karamian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  92 - Evaluation of GMAW Welded Joints in A36 Low-Alloy Marine Steel Sheets: Tensile Test, Hardness, and Fatigue Properties
  Mohammad reza Maraki Masoud Mahmoodi Milad Khodaei Hadi Tagimalek
• Open Access Article
  • Abstract Page
  • Full-Text
  
  93 - Influence of Withdrawal Rate on As-Cast Microstructure and Stress-Rupture Life of Directionally Solidified Rene80 Superalloy
  sobhan Rajabi nejad Masumeh seifollahi seyed mahdi Abbasi Seyed Mahdi Ghazi mirsaeed
• Open Access Article
  • Abstract Page
  • Full-Text
  
  94 - Effects of Fe and Si Additions on Erosion-Oxidation Behavior of Nickel Alloys in Chlorine-Containing Oxidative Atmospheres
  Mohammad Emami Shigenari Hayashi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  95 - Evaluation of Flow Behavior of Novel Titanium Ti-3873 Alloy Via Compressive Deformation in Two Phase α/β and Single Phase β Regions
  Mahnaz Dabbaghi Maryam Morakabati
  10.71670/jmatpro.2024.981662
• Open Access Article
  • Abstract Page
  • Full-Text
  
  96 - Fine Grain Formation in as Cold Worked SP700 Titanium Alloy and Its Effect on Mechanical and Superplastic Properties
  Marjan Daryaban Maryam Morakabati Noshin  Meraji
  10.71670/jmatpro.2024.981663
• Open Access Article
  • Abstract Page
  • Full-Text
  
  97 - Simulation of Plastic Deformation Behavior of Ti-6Al-4V Alloy by Finite Element Method
  E Amini F Madadi Sh Katani M Atapoor
• Open Access Article
  • Abstract Page
  • Full-Text
  
  98 - Production of Fe-TiN and Fe-Ti(N,C) composite powders by mechanical alloying
  S Nazari A Saidi A Shafyei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  99 - Optimization and utilization of semisolid casting process for semisolid welding of Al-6061 alloy
  M Hajihashemi M Shamanian B Niroumand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  100 - Effect of Deposition Regime on Tribological Behavior of VK8Coating on 1.2344 Tool Steel Obtained by Electro Spark Method
  M Aghakhani A Shafyeib H Monajatizadea M. A Aghakhani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  101 - An investigation on metallurgical and mechanical properties of vacuum brazed Ti-6Al-4V to 316L stainless steel using Zr-based filler metal
  M.E Bajgholi R Soltani Tashi A.A Akbari Mousavi E Heshmat Dehkordi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  102 - Vacuum Brazing of Zirconium-Based Alloy and 321 Stainless Steel Using Titanium Based Filler Metal
  M.E Bajgholi E Heshmat Dehkordi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  103 - Fabrication of TiC particulate reinforced Ni-50Fe super alloy matrix composite powder by mechanical alloying
  M.H Shirani A Saidi A.R Shirani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  104 - Fabrication of Soft Magnetic Fe-based Nanoalloy
  Qi Wong Yong Li
  10.22034/jna.2016.01.003
• Open Access Article
  • Abstract Page
  • Full-Text
  
  105 - Ab initio (first principle) material modeling study on Lio adsorbed by palladium-cobalt (PdCo) nanoparticles
  Mikail Aslan
  10.22034/jna.2019.669850
• Open Access Article
  • Abstract Page
  • Full-Text
  
  106 - An Investigation on the Application of CNT-Aluminum Nanocomposite in Mechanical Alloying
  Pavel Kirshkov Jasmin Liakov Raha Vasegh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  107 - Dissimilar Friction Stir Welding between Magnesium and Aluminum Alloys
  Mahdi Salari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  108 - Evaluation of Optimal Conditions, Microstructure, and Mechanical Properties of Aluminum to Copper Joints Welded by FSW
  Ahmad Afsari Shahin Heidari Jaleel Jafari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  109 - Study of Mechanical Properties of 7075 Aluminum Alloy Due to Particle Size Reduction due to Constrained Groove Pressing CGP Process
  Shahin Heidari Ahmad Afsari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  110 - Investigation of the Effect of Different Forming Pressure Curves on Formability of AA1050 Tubes in Warm Hydroforming Process
  Seyed Jalal Hashemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  111 - Effects of Shot Peening Angle and Time on Microstructure and Wear Behavior of AZ31 Alloy
  Seyyed Nabi Al-din Sharifi-Shirmardi Reza Abedinzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  112 - Experimental Investigation of One-pass and Two-pass Friction Stir Welding Process of Aluminum Alloy 6061 with and without Copper Foil
  Qadarat Mohammad Jassim Al-Issawii Maziar Mahdipour Jalilian Mahdi Karami Khorramabadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  113 - Improving the Hardness and Microstructural Properties of Piston Alloy Using the FSP Method
  Mostafa Akbari Parviz Asadi Hossein Rahimi Asiabaraki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  114 - Prediction of Heusler Alloys with Giant Magnetocaloric Effect using Machine-Learning
  Tasnim Gharaibeh Pnina Ari-Gur Elise de Doncker
• Open Access Article
  • Abstract Page
  • Full-Text
  
  115 - Failure Evaluation of Cupronickel Alloy Used in the Condenser of the Desalination Unit
  Javad Hashemi Amin Rabiezadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  116 - Investigation of Effective Parameters on the Surface Temperature Gradient under Equal Channel Angular Pressing Process of AA2017
  Farshid Ahmadi Hadi Mansouri Elyas Sarami Foroushani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  117 - Evaluation of the Cryogenic Effect on Friction Stir Processed AA7075/Si Matrix Nanocomposites
  Navid Molla Ramezani Behnam Davoodi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  118 - Survey and Study of Machinability for Titanium Alloy Ti-6Al-4V through Chip Formation in Milling Process
  Hassan Gheisari Ebrahim Karamian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  119 - Survey of AZ31/HA-Zeolite Nano Crystalline Biocomposite with Powder Metallurgy (PM)
  Mehrdad Soltani Ebrahim Karamian Majid Karimian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  120 - Machinability evaluation of Titanium alloy in Laser Assisted Turning
  Kamran Puladsaz Razavi Shojae Rezavi Mehdi Tajaddara
• Open Access Article
  • Abstract Page
  • Full-Text
  
  121 - Characterization and Investigation of Grain Selection in Spiral Grain Selectors during Casting Single-Crystal Turbine Blades
  Hassan Gheisari Ebrahim Karamian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  122 - An Investigation on Formability and Crystallographic Texture in Novel Magnesium Alloys
  Pnina Ari-Gur Andreas Quojo Quainoo Shubram Subramanyam Ashkan Razania Sven C. Vogel Wei Gao
• Open Access Article
  • Abstract Page
  • Full-Text
  
  123 - Effect of Overage Hardening Heat Treatment on the Micro Structure and Hardness of Nickel-based Super Alloy Rene-80
  Mahmoud Moradi Mohammad Meghdad Fallah Fallah Mahdi Kazazi Mahdi Vahdati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  124 - Experimental Investigation of Thermal Conductivity of Aluminum Alloy 3003 Produced by Equal Channel Angular Rolling Process
  Mohammad Honarpisheh Mohammad Reza Aghili Mahdi Kotobi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  125 - The Effect of the Third Element on Corrosion Behavior and Phase Structure of Fe35Mn Alloy Fabricated by Spark Plasma Sintering (SPS)
  Nahid Hasanzadeh Nemati Mahdis Parsafar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  126 - The Effect of Artificial Aging Treatment and Lubrication Modes on the Cutting Force and the Chip Surface Morphology when Drilling Al-Si-Mg (A356) Cast Alloys
  Seyed Ali Niknam Keyhan Jabbari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  127 - The Effect of Chemical Composition on Wear and Microstructural Properties of Babbitt Coatings
  Zahra Moghadami Ali Mehdi Pour Omrani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  128 - Simulation of Tool Rotation and Travelling Speed Effects on Friction Stir Welding of Ti-6Al-4V
  Hamed Aghajani Derazkola
• Open Access Article
  • Abstract Page
  • Full-Text
  
  129 - Production of Dispersed Ceramic Nano-Particles in Al Alloy Using Friction Stir Processing
  Amin Rabiezadeh Ahmad Afsari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  130 - Evolution of Texture and Grain Size during Equal Channel Angular Extrusion of Pure Copper and 6012 Aluminum
  Mohammad Hossein Shahsavari Farshid Ahmadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  131 - Effect of Electrical Current on Nitinol Medical Staples Shape Memory
  Nahid Hasanzadeh Nematy Fatemeh Farhadi Sahar Shapurgan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  132 - Fabrication of Porous Segments Using Ti-6Al-4V Chips for Orthopaedic Applications
  Nahid Hassanzadeh Nemati Shiva Yasini Maryam Aryana
• Open Access Article
  • Abstract Page
  • Full-Text
  
  133 - Comparison of Hardness Values of Various specimens with different geometries and material properties after ECAP
  Mohammad Hossein Shahsavari Farshid Ahmadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  134 - Experimental Investigation and Analysis of Manufacturing Wind Turbine Blades Produced by Hydroforming of Aluminum Alloy AA5754
  Javad Shahbazi Karami Hamed Bakhtiarizade Mohsen Shahmoradi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  135 - Fabrication of Various Dimple Shapes and Arrays on a Hypereutectic Al-Si Alloy Using a Turning Process
  Jaharah A. Ghani Faarih Farhan Mohd Nasir Mohd Nasir Mohd Nor Azam bin Mohd Dali Wan Fathul Hakim W. Zamri Mohd Shahir Kasim Che Hassan Che Haron
• Open Access Article
  • Abstract Page
  • Full-Text
  
  136 - Improving the seismic performance of the butterfly slit damper using a nitinol shape memory alloy in the diagonal CBF brace
  farzad vafadar Vahid Broujerdian ali ghamari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  137 - Improving the Seismic Performance of the Butterfly Slit Damper Using a Nitinol Shape Memory Alloy in the Diagonal CBF Brace
  farzad vafadar Vahid Broujerdian Ali Ghamiri
  10.30495/civil.2024.709661
• Open Access Article
  • Abstract Page
  • Full-Text
  
  138 - The Effect of SMA Damper on Energy Dissipation and Eduction of Vibration Amplitude of Multi-Story Steel Frames
  Ali Seyedkazemi milad esmaeili saman eftekhar ardabili morteza hoseinali beygi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  139 - Evaluating the seismic performance of steel-sma hybrid Bracing structures
  mohammad hooshmand behzad rafezi jafar khalileAlafi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  140 - Comparison of Progressive Collapse in Moment Connections with Low-strength Steel
  ahmad karimian arastoo armaghani Alaeddin Behravesh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  141 - Efficient synthesis of xanthene derivatives in aqueous media in the presence of Cu-anchored furfural imine-functionalized halloysite
  Samahe Sadjadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  142 - Process capability improvement through DMAIC for aluminum alloy wheel machining
  G. V. S . S. Sharma P. Srinivasa Rao B. Surendra Babu
• Open Access Article
  • Abstract Page
  • Full-Text
  
  143 - Finite Element Analysis of the Pseudo-elastic Behavior of Shape Memory Alloy Truss and Beam
  Kamal M. Bajoria Surajit Das
• Open Access Article
  • Abstract Page
  • Full-Text
  
  144 - جوشکاری سوپر آلیاژ پایه نیکل روسوب سخت شونده
  محمد رضا محقق نیا
• Open Access Article
  • Abstract Page
  • Full-Text
  
  145 - Experimental Investigation of the Effect of Using Tools with Tapered Pins in Friction Stir Welding (FSW) of AA6061-T6 Aluminum Alloy
  Saleh Al Khatour Maziar Mahdipour Jalilian Mahdi Karami Khorramabadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  146 - Electrochemical Evaluation of Hydroxyapatite/ZrN Coated Magnesium Biodegradable Alloy in Ringer Solution as a Simulated Body Fluid
  Seyed Rahim Kiahosseini Abdollah Afshar Majid Mojtahedzadeh Larijani Mardali Yousefpour
  10.22034/jchr.2018.544092
• Open Access Article
  • Abstract Page
  • Full-Text
  
  147 - Study the phase transformation of Ti-6242 alloy and Determination the beta-transus temperature
  علیرضا حجاری مریم مرکباتی رامین حسینی یاور منصوری مهدی عباسی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  148 - Effects of alumina nanoparticles, number of stirring pass and rotational speed on the mechanical behavior of friction stir welded (FSW) magnesium alloy (AM60)
  Arash Behzadineghad Abbas mohassel Hamid Omidvar Nader Setoudeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  149 - Investigation the effects of SiC reinforcement incorporation on mechanical properties of friction stir welded AZ31 magnesium alloy
  AMIN ABDOLLAHZADEH Ali shokouhfar حمید امیدوار محمد علی صفرخانیان محمدرضا نادری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  150 - Similar and dissimilar 5754 and 6063 aluminum alloy joints by friction stir welding
  امین ربیعی زاده احمد افسری فرهاد ارغوانی فرناز احمدی کیسمی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  151 - Evaluation of Microstructure and Mechanical Properties of Friction Stir Lap Welded 6061 Aluminium Alloy at various welding speeds
  فرهاد غروی ایمان ابراهیم زاده علی سهیلی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  152 - Influence of Cold Rolling and Annealing on Microstructure and Tensile Properties of Hastelloy X Superalloy
  حمید فیض آبادی سید مهدی عباسی مریم مرکباتی رشید مهدوی محمدرضا توکلی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  153 - A Study on Effect of Processing Parameters on Electrical Conduction and Micro-hardness of Nano-crystalline Cu-5%at Ta Alloy.
  Roohollah Rahmanifard mohsen asadi asadabad سید میثم جاویدان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  154 - Investigation of hydrogen desorption temperature of MgH2-10wt% (Ti, Mn, V and Fe) nanocomposite produced by mechanical alloying
  حسین محمدی سید جمال حسینی پور محمد رجبی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  155 - Investigation of effect of tool geometry on formation of common defects, and mechanical properties of 5456 Aluminum alloy, in Friction Stir Lap Welded process
  MOHAMMADREZA NADERI محمد علی صفرخانیان امیر حسین کوکبی امین عبداله زاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  156 - Effect of TiO2 Content of the Slag of Electro Slag Remelting Process on Chemical Composition, Microstructure and Mechanical properties of Recycled IN713LC
  مرتضی زمانی معصومه سیف اللهی سید مهدی عباسی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  157 - Investigating X-ray diffraction and microstructure analysis of new high entropy alloys TiZrNbXX made by powder metallurgy method
  Masoud Yousefi Masoud Rajabi Ali Reyhani Khosrow Rahmani Nayereh Asgari
  10.71753/ma.2024.1089251
• Open Access Article
  • Abstract Page
  • Full-Text
  
  158 - The effect of heat treatment and copper on the tensile properties and quality index of Al-7Si-0.35Mg-xFe alloys
  رضا تقی آبادی محمد تلافی نوغانی یلدا کریمی مهسا ایرانشاهی مریم نظری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  159 - The effect of thermomechanical parameters on texture behavior of AZ63 magnesium alloy
  غلامرضا ابراهیمی مهدی کاویانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  160 - Modelling and prediction of the yield strength of 6061 aluminum alloy processed by accumulative roll bonding (ARB)
  Mohammad Reza Rezaei Mohammad Reza Toroghinejad Fakhreddin Ashrafizadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  161 - Modelling of austenite formation in weld heat affected zone of API-X65 and X70 pipeline steels
  Jaafar Ahmadi rad Gholamreza Khalaj
• Open Access Article
  • Abstract Page
  • Full-Text
  
  162 - Effect of Powder Morphology on Thermal properties and strentgh of High Heat Flux Porous Coatings Synthesized by Powder Metallurgy
  علی کفلو مونا معیری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  163 - Investigation on effect of Hafnium addition on electrical and isothermal oxidation resistance of Ni-super alloy using for metallic interconnect of SOFC
  dannial azimi- yancheshmeh Mohammad Esmailian Kourosh Shirvani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  164 - Effect of Shoulder Surface Angle of Tool on Joint Properties in Friction Stir Welding of 5052 Aluminium Alloy
  فرهاد غروی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  165 - Effect of Tool Rotation Speed on the Mechanical Properties and Corrosion Behavior of Dissimilar Friction Stir Welded of 5083 Aluminium Alloy and Commercially Pure Titanium
  Masoud Shabani بهروز شایق بروجنی رضا ابراهیمی کهریزسنگی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  166 - The effect of calcium on corrosion behavior of biodegradable Mg-5Zn-1Y Alloy
  Fereshteh Dostmohamadi Hasan Jafari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  167 - Fabrication and characterization of ribbon and powder of amorphous alloy MBF-100 used in super alloy FSX- 414 TLP bonding
  Mohamad Rajabi رضا بختیاری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  168 - Effect of cooling rate on microstructure and corrosion behavior of biodegradable Mg-5Zn-1Y-0.1Ca alloy in simulated body fluid
  Hasan Jafari Saeideh Naghdali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  169 - ارزیابی خواص مکانیکی جوش های غیر مشابه فولاد زنگ نزن AISI 347 به فولاد کم آلیاژ ASTM A335
  iman HAJIANNIA
• Open Access Article
  • Abstract Page
  • Full-Text
  
  170 - Study and investigation on the formation of NbAl3-based nanocomposite reinforced by Al2O3 particles: microstructural and thermal analysis investigation
  Hossein Mostaan Mahdi Rafiei Mohammad Hasan Abbasi Fathollah Karimzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  171 - Investigation of Microstructure, Hardness and Intermetallic Compound in Friction stir Welding of AA6065 Aluminum Alloy to Copper
  مجید الیاسی Rahim Narimani Mortza Hosseinzadeh Hamed Aghajani Derazkola
• Open Access Article
  • Abstract Page
  • Full-Text
  
  172 - Efect of temperature on microstructure and intermetallic compound formation of Diffusion Bonded Mg/Al joints
  Mohammad Ammar Mofid Mostafa Hajian Heidary Ehsan Loryaei Hatef Shakeri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  173 - Investigation of 6061 aluminum alloy pulsed laser welding based on the physical models for prediction of hot cracks
  hossain ebrahimzadeh hassan farhangi seyed ali asghar akbari mousavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  174 - Investigation of reducing agent type on the synthesis behavior and microstructure of Ni-Cr-Mo alloy synthesized by microwave-assisted combustion synthesize
  Mostafa Tahari Jalil Vahdati khaki Mostafa Mirjalili
• Open Access Article
  • Abstract Page
  • Full-Text
  
  175 - Pulsed laser surface melting of AISI H13 steel and investigating the effect of TiC powder particle size and concentration on the morphology of MC carbides in the composite coating
  محمدعلی بوترابی Ali Dadoo Shahram Kheirandish
• Open Access Article
  • Abstract Page
  • Full-Text
  
  176 - Investigating the sensing properties of SnO2-PdPt nanohybrid toward methane gas and effect of adding reduced graphene oxide on improving its sensing performance
  Shiva Navazani Ali Shokuhfar Mostafa Hassanisadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  177 - Effect of hot rolling and heat treatment on anisotropy properties of Mg alloy LZ71
  Mostafa Pahlavani Javad Marzbanrad Abbas Bayati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  178 - Investigation of Dynamic and Static Restoration in Hot Deformation of SP-700 Titanium Alloy
  Amir hosein Sheikhali Maryam Morakkabti seyed mahdi abbasi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  179 - The effect of Pt on type II hot corrosion behavior of Si-aluminide coatings with lower silicon than the critical amount
  Seyed Amir Azarmehr kourosh shirvani Jozdani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  180 - Synthesis of nanostructured bornite by mechanical alloying and investigate the effect of co-doping Zn and Co on its thermoelectric properties
  Ahmad Ostovari Moghaddam Ali Shokuhfar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  181 - Aluminum alloy (АМГ6М) joining by two processes of friction-stir and non-consumable Tungsten electrode welding and comparison of their mechanical and microstructure properties
  Aliasghar Torabi Tahmineh Ahmadi Afshin Shirali Mohammadreza Khanzadeh ghareshiran Majid Taghian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  182 - Modification of Microstructure and Enhancing Mechanical Properties of as-cast AZ91 Magnesium alloy via Friction Stir Processing
  Hassan Jiryaei Sharahi Majid Pouranvari Mojtaba Movahedi
  10.30495/apme.2021.681639
• Open Access Article
  • Abstract Page
  • Full-Text
  
  183 - Effect of Filler Metal on the Oxidation Resistance of 35Cr-45Ni Alloy Weld Metal
  Esmaeel Ahmadizadeh Reza Derakhshandeh Haghighi Amin Rabiezadeh Shiva Mansourzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  184 - Effect of Rotational Speed on Microstructure and Mechanical Properties of AA5456 Alloy Welded by FSW-Lap Joint
  mohamad ali safarkhanian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  185 - Effect of bonding time on microstructure and completion of isotherm solidification during TLP bonding of dissimilar nickel base superalloys IN738LC and Nimonic 75
  Meysam Khakian Ghomi Mohammad Saeid Shahriari Saeid Nategh
  10.30495/apme.2021.510140.1047
• Open Access Article
  • Abstract Page
  • Full-Text
  
  186 - Improving the Biocompatibility Performance of Ti-6Al-4V Alloy with Bi Phasic Calcium Phosphate Gradient Coating By Plasma Spray Method
  fahimeh saji iman mobasherpour liela nikzad
  10.30495/apme.2021.1925953.2035
• Open Access Article
  • Abstract Page
  • Full-Text
  
  187 - Effect of Protective Behaviour of Biofilm Formed By the Anaerobic Sulfate-Reducing Bacteria on the Corrosion Resistance of the API X42 Microalloyed Steel
  mojtaba Baghalzadeh Khalilollah Gheisari Hossien Motamedi
  10.30495/apme.2021.1927007.2045
• Open Access Article
  • Abstract Page
  • Full-Text
  
  188 - The Investigation of the Corrosion Resistance of Al/Alumina Composites Fabricated Via ARB Process
  Ali Jahangiri Sadri Mohammad Heydari Vini Saeed Daneshmand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  189 - Mechanical alloying and fabrication of Zn-4Mn fragments produced by SPS method for using in short-term implants
  Nahid Hassanzadeh Nemati mohammad babaiee erfan chizari davood malekpajouh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  190 - Thermal shock behavior of thermal barrier coatings YSZ, YSZ/mullite and gradient coating YSZ/mullite on nickel base superalloy prepared by plasma spray (APS) method
  Nader Soltani iman mobasherpour Esmail Salahi Ali Sedaghat Ahangary
• Open Access Article
  • Abstract Page
  • Full-Text
  
  191 - Investigation on corrosion and tribological behaviour of plasma electrolytic oxidation coating formed on aluminium hydraulic tappet
  Saeed Safari Esmaeil Ahmadi Hossein Safari
  10.71753/ma.2024.1089985
• Open Access Article
  • Abstract Page
  • Full-Text
  
  192 - The effect of addition of aluminum and titanium alloy Tghyyrshklgrm behavior Aynvar
  Amir Pahlavani Seyed Mehdi Abbasi Maryam Morakabati Rashid Mahdavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  193 - Influence of mechanical alloying and preheating on fabrication of NiTi alloy by combustion synthesis
  Ali Reza Sadegi Aval Shahr Hassan Mostajab o daveh Abolfazl Babakhani Mojtaba Zebarjad Akram Salehi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  194 - The Influence Of additive Erbium on Thermodynamic Behaviors of Aluminum - Zinc Alloys
  Reza Amini Najafabadi Mohammad Razazi Boroujeni Izatulla Ganiev Ziadulla Obidov
• Open Access Article
  • Abstract Page
  • Full-Text
  
  195 - بهینه سازی پارامترهای جوشکاری قوس تنگستن گاز پالسی در اتصال غیرمشابه مونل۴۰۰ و فولاد زنگ نزن آستنیتیL۳۱۶
  علی خلیلی مسعود کثیری عسگرانی مرتضی شمعانیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  196 - سنتز آلیاژ تیتانیوم (Ti-6Al-4V)به روش آلیاژسازی مکانیکی و بررسی رفتار مکانیکی و زیست فعالی نانوکامپوزیت (Ti-6Al-4V/HA-Clay)
  محمدعلی مطلبی ابراهیم کرمیان مجید کریمیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  197 - بررسی مکانیزم های خرابی در پوشش های حائل حرارتی تحت بارگذاری خستگی هم دما و غیرهم دما با طراحی آزمایش ها
  محمد آزادی غلامحسین فرهی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  198 - ساخت و مشخصه یابی ایمپلنت های نانوکامپوزیتی منیزیمی AZ31/HA-Zeolite به روش آلیاژ سازی مکانیکی و متالورژی پودر
  حسن قیصری ابراهیم کرمیان محمد براتی سده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  199 - A brief review on titanium alloy for dental, biotechnology and biomedical applications
  Sharif Heydari Maryam Sadat Mirinejad Mohammd Hossein Malekipour Esfahani Fatemeh Karimian Ali Attaeyan Mehran Latifi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  200 - تحلیل غیرخطی رفتار ترمومکانیکی مواد مرکب فعال شده بوسیله الیاف آلیاژ حافظه دار
  سیامک مقبلی محمدجواد محمودی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  201 - تحلیل ارتعاشات غیرخطی ورق کامپوزیتی با الیاف حافظه دار با در نظر گرفتن تغییرات لحظه ای کسر حجمی فاز مارتنزیت
  محمد شرعیات سارا سمایی مجتبی مرادی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  202 - ارائه یک مدل جدید پیش بینی عمر خستگی کم چرخه آلیاژ منیزیم براساس روش انرژی کرنش پلاستیک تصحیح شده
  محمد آزادی غلامحسین فرهی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  203 - ارزیابی عملکرد ابزار با پوشش های چند لایه نانوکریستال در ماشین کاری سوپر آلیاژ اینکونل 718
  رسول مختاری همامی بهروز موحدی ایرج لیرابی مهدی بازرگان حقیقی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  204 - بررسی نیروهای ماشینکاری سوپر آلیاژ اینکونل 718
  سید مسعود بدخشیان مجید کریمیان سید علی افتخاری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  205 - بررسی پارامترهای حاکم و بهینه‌سازی سختی مذاب در حال انجماد آلیاژ آلومینیوم A380 تولید شده به روش ارتعاش مکانیکی
  سعید احترامیان حقیقی امین کلاه دوز مجید کریمیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  206 - Investigating the Effect of T6 Heat Treatment on Mechanical Properties of 7075 Al Alloy
  Mohsen Emami Vahid Hasan Nasab
• Open Access Article
  • Abstract Page
  • Full-Text
  
  207 - Effect of Aging on Microstructure and Tensile Properties of ASTM F75 Co-based Alloy Containing Different Carbon Contents
  shahin Torkamani Masumeh  Seifollahi Maryam Morakabati Adli Akhondzadeh
  10.71670/jmatpro.2024.1106376
• Open Access Article
  • Abstract Page
  • Full-Text
  
  208 - Effect of Laser Parameters on Geometry of Cladded Stellite 6 on 35CrMo Steel Substrate and its Characterization
  Bahman  Mansouri Mahdi Rafiei Iman Ebrahimzadeh Farid  Naeimi Masoud  Barekat
  10.71670/jmatpro.2024.1115395
• Open Access Article
  • Abstract Page
  • Full-Text
  
  209 - Investigation the weld quality characterizations and temperature field in laser welding of dissimilar Nickle-base alloy Inconel 600 and duplex stainless steel
  Ahmad Soleimani Mohammad Akbari Arash Karimipour Amir Homayoun Meghdadi Reza Nosouhi
  10.71939/jsme.2024.1119530
• Open Access Article
  • Abstract Page
  • Full-Text
  
  210 - Investigating the Effect of Changing Plasma Electrolytic Oxidation on the Scratch Degradation of Ti-6Al-4V
  M.R. Tavighi A. Rabieifar O. Ashkani A. Asaadi Zahraei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  211 - An Investigation on the Metal Injection through the Producing of MIM-ed Low-Alloy Steel
  S. Rezaei A. Askari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  212 - Shape Memory Alloy (SMA) as Smart Materials Application in Structural Engineering in the Last Decade
  R. Jamalpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  213 - Investigating of Manufacturing of Titanium Hip Prosthesis by Cold Forging Process via FEM Analysis
  Mohammad Mahdieh Farshad Nazari Khalid  Shleej Zayed Fatemeh Aghoun
  10.71762/z6e6-aw80
• Open Access Article
  • Abstract Page
  • Full-Text
  
  214 - Comparison of the Microstructure and Mechanical Behavior of the Welding Zone of Aluminum Alloy 5754 by FSW and TIG Methods
  Esmaeil  Zarei Ahmad Afsari Eshagh  Saharkhiz Seyed Kambiz  Ghaemi Osgouie
  10.71762/7mt5-v498
• Open Access Article
  • Abstract Page
  • Full-Text
  
  215 - Numerical Implementation of A Nonlocal Damage Model For A Stress Regime-Dependent Creep Constitutive Model
  Behzad Dastgerdi Mostafa Baghani
  https://doi.org/10.60664/jsm.2024.1129238
• Open Access Article
  • Abstract Page
  • Full-Text
  
  216 - The Effect of Environmental Parameters on the Corrosion Behavior of Simple Shear Extruded AZ91 Magnesium Alloys
  Ramineh Medhat Mahmoud Pakshir Khashayar Morshed Behbahani Pooria Najafisayar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  217 - Investigation on the effect of Al addition on synthesis of Ti3SiC2 nanostructure by Mechanical alloying – heat treatment method
  نوید Atazadeh مینا Saeedi Heydari H.R Baharvandi ناصر Ehsani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  218 - Effect of Heat Treatment and Hot Working on Vibrational and Mechanical Properties of Magnesium Alloy AZ91
  رضا Azarafza A.H Rezaei M.R Montajabiha
• Open Access Article
  • Abstract Page
  • Full-Text
  
  219 - Effect of milling time and investigation of thermodynamic analysis on amorphous phase formation in Fe-C-Ta alloy prepared by mechanical alloying
  احسان Bahadori yekta A.H Taghvaei Sshahriyar Sharafi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  220 - Flow behavior and microstructural investigation of GTD 111 cast nickel base superalloy during hot pressure test
  مهسا Mohammadpour امیر Momeni
• Open Access Article
  • Abstract Page
  • Full-Text
  
  221 - Effect of PCA addition on microstructural and magnetic Properties a new Fe-based amorphous alloy prepared by Mechanical Alloying
  ehsan bahadori yekta Amir Hossein Taghvaei shahriyar sharafi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  222 - Influence of Process Parameters on Hot Backward Extrusion of Al 6061 alloy
  عصمت Behtari Poor M.M Moshksar رامین Ebrahimi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  223 - Study of PEO on the fatigue behavior of titanium alloy Ti-6Al-4V
  صفا Falahati aghda محمود Hajisafi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  224 - Modelling of austenite decomposition transformation of heat affected zone in API-X65 and X70 pipeline steels
  Gholamreza Khalaj
• Open Access Article
  • Abstract Page
  • Full-Text
  
  225 - Investigation of creep behavior of ME21 and MX21 magnesium alloys
  Zahra Dashti Abdolreza Geranmayeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  226 - Investigation Corrosion Fatigue Behaviours of 7075-T6 Aluminum Alloy in Sea Waterr
  ابوالفضل Khezri محمود Hajisafari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  227 - Effect of heat input on microstructure, mechanical properties and corrosion behavior of 5083-H321 aluminum alloy welded joint using P-MIG process
  میثم Ahmadi علی Farzadi A. R Yazdipour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  228 - Achieving optimal conditions for manufacturing of A356 aluminum alloy/ BN(h) composite using stir casting
  مسعود Moshrefifar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  229 - Effects of severe plastic deformation on mechanical properties, electrical conductivity and microstructure of Al-7075 alloy
  علیرضا Dashti M.H Shaeri رضا Taghiabadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  230 - Influence of filler metal on the microstructure of dissimilar welds between UNS S32205 duplex stainless steel and ASTM A517 Quench and tempered steel
  A.R Forough مرتضی Shamanian مسعود Kasiri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  231 - protrusion friction stir spot welding: the microstructure and mechanical properties of Al 6061 alloy
  omid zarei mostafa mosavizade fateme zarghani hamed zarei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  232 - Effect of Pb on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy
  Mohammad Reza Askaran Masoud Emamy Mehdi Malekan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  233 - Investigation of wear properties of Al6061 alloy and composite containing CNT produced by mechanical alloying and hot pressing process
  mahdi omidi saeid nategh Arash Etemad mohammad reza rostami mohammad esmaeil shafiei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  234 - Indentation creep behavior of AZ61-0.7Si-xCa magnesium alloys
  Nikoo Berenji Tehrahi Reza Mahmudi Abdolreza Geranmayeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  235 - Effect of cold rolling process on recovery strain and recovery ratio of Ni50Ti40Hf10 shape memory alloy
  majid belbasi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  236 - Influence of Friction Stir Welding Parameters on Mechanical and Metallurgical Properties in Lap Joints of 5456Aluminum Alloy
  منصور مردعلی زاده محمد علی صفرخانیان محمد رضا سلیمانی یزدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  237 - An Investigation of different parameters on the penetration depth and welding width of Ti-6Al-4V alloy by plasma arc welding
  Yaser Vahidshad Amir Hossein Khodabakhshi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  238 - Effect of bonding time and temperature on microstructure of GTD-111/ BNi-3 /GTD-111 system during the Transient Liquid Phase (TLP)
  Seyed Abdolkarim Sajjadi Javad Asadi Hamid Omidvar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  239 - synthesis and characterization of Al-Al3Ti in-situ composite produced by fsp using reactive mechanically alloyed powder
  Behnam Lotfi pooriya poorchini Zohreh Sadeghian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  240 - Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions
  Abbas Yazdizade Khalili sadegh ghasemi banadkouki Hamid Reza Karimi Zarchi masoud mosallaee pour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  241 - Study on hot deformation behaviuor of Mg-7.1Gd-2.8Y-1.3Nd-0.4Zn magnesium alloy using hyperbolic sine equation and processing maps
  Gholam reza Ebrahimi Ehsan Rezaeii Kheybari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  242 - Superior improvement of tensile properties in a low alloy medium silicon DIN 1.5025 steel under single step quenching and partitioning heat treatment compared to fully martensitic conditions
  Shima Pashangeh sadegh ghasemi banadkouki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  243 - A comparative study on the effect of electrodeposition current density on the grain size of Ni and Ni-W nanocrystalline coatings
  Bahar Bahrami-fard Ali Mohammad Rashidi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  244 - Investigation of effective parameters on dissimilar infrared brazing for Ti-6Al-4Vv and SS316 L by Ag Base filler metal
  Esmaeil Ganjeh Mohammad Ghasemzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  245 - Tensile behavior of AZ91 alloy containing silver and under different casting conditions
  Pouria Kamaei Mehdi Khorasanian Seyed Reza Alavi Zaree Mostafa Eskandari
  10.30495/jnm.2023.32303.2009
• Open Access Article
  • Abstract Page
  • Full-Text
  
  246 - Effect of MCrAlY coating on crack formation during thermal fatigue testing of a directionally solidified Nickle based superalloy
  Alimohammad Fazeli Tehrani Hasan Farhangi
  10.30495/jnm.2023.31984.2008
• Open Access Article
  • Abstract Page
  • Full-Text
  
  247 - Investigation of gamma precipitation process under effect of strain in Nimonic80A nickel base superalloy
  Masoud Mirzaee Alireza Khodabade Hamidreza Najafi Gholam reza Ebrahimi
  10.30495/jnm.2021.4677
• Open Access Article
  • Abstract Page
  • Full-Text
  
  248 - Modification of mechanical properties of friction stir welded AM60 magnesium alloy with changing rotational speed and addition of nano alumina particles
  Arash Behzadinezhad Abbas mohassel Hamid Omidvar Nader Setoudeh
  10.30495/jnm.2022.28682.1932
• Open Access Article
  • Abstract Page
  • Full-Text
  
  249 - Tracing the creep lifetime degradation of IN738LC superalloy based on the primary carbide decomposition reaction and composition changes in the carbide regions
  farsad forghani mohsen mehdizadeh masoume rayatpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  250 - Microstructural characterization and mechanical properties of IN617 superalloy after long-term operation
  mohsen mehdizadeh Hasan Farhangi
  10.30495/jnm.2021.29188.1940
• Open Access Article
  • Abstract Page
  • Full-Text
  
  251 - Investigating the Effect of Intercritical Annealing Heat Treatment on the Quenching and Partitioning of Ferrite-Bainite-Martensite Microphases in High-Silicon Low-Alloy DIN 1.5025 Steel
  Shima Pashangeh Soheil Afkhami Seyyed Sadegh Ghasemi Banadkouki
  10.30495/jnm.2024.33076.2033
• Open Access Article
  • Abstract Page
  • Full-Text
  
  252 - Investigation of corrosion resistance of Ti-6Al-4V alloy welding zone Welded by TIG method
  mehdi kabiri laghab majid belbasi mohamadamar mofid
  10.30495/jnm.2021.24515.1859
• Open Access Article
  • Abstract Page
  • Full-Text
  
  253 - Investigating the effect of silicon content on structure and corrosion resistance by plasma electrolytic oxidation on aluminum-silicon alloys
  Masoud Moshrefifar
  10.30495/jnm.2024.32998.2029
• Open Access Article
  • Abstract Page
  • Full-Text
  
  254 - Aluminum nanocrystalline powder production from aluminum alloy scrap by solid state recycling method
  Hadi Rezazadeh Maziyar Azadbeh
  10.30495/jnm.2023.32501.2015
• Open Access Article
  • Abstract Page
  • Full-Text
  
  255 - Microstructural Characterization and Damage Mechanism of the First Stage Blade GE MS9001 After Long-term Exposure
  Hassan Ghorbani Hassan Farhangi Mehdi Malekan
  10.30495/jnm.2023.32570.2012
• Open Access Article
  • Abstract Page
  • Full-Text
  
  256 - Investigating the effect of intelligent alloy material properties on the performance of stents used in human trachea using FEM
  Hamidreza Mortazavy Beni
  10.30495/jnm.2024.33507.2044
• Open Access Article
  • Abstract Page
  • Full-Text
  
  257 - Modeling and investigation of the effect of supersolidus liquid phase sintering variables on physical properties and Mechanics of Cu28Zn alloy
  احد محمدزاده مازیار آزادبه
• Open Access Article
  • Abstract Page
  • Full-Text
  
  258 - Microstructural Grading of Al-11 wt.%Mg2Si Hypoeutectic Alloy by Centrifugal Casting
  حجت اله امرایی احد صمدی اکبر وجد
• Open Access Article
  • Abstract Page
  • Full-Text
  
  259 - Effect of the shoulder size and dwell time on the static Strength and fracture mode of projection friction stir spot welded 2024 aluminum alloy
  F. zarghani seid m. mousavizade G.R Ebrahimi H.R. Ezatpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  260 - The Experimental and Numerical Evaluation of the Residual Stress in the Hot Forming Sheet Process for 5083 Aluminum via the Gas Blowing Process
  H. Fattahi M. Jalali Azizpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  261 - Optimizing Parameters for Chemical Synthesis of Fe-B Alloy Nanoparticles by Taguchi Method
  S. SH R. صراف ماموری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  262 - Effect of Sr on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy
  A. Afsharnaderi J. Rasizadeh M. Malekan M. Emamy
• Open Access Article
  • Abstract Page
  • Full-Text
  
  263 - Effect of mechanical alloying and heat treatment process on the phase transformation of Ni-Cr-Al powders mixture
  امیررضا شیرانی علی شکوه فر محمد حسین عنایتی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  264 - Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy
  A. Pahlavani S.M. Abbasi M. Morakabati R. Mahdavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  265 - Characterization and Dielectric Properties of Nanocrystalline NiO-based Electroceramics Prepared by Mechanical Alloying
  F. Talatori M.J Hadiyan fard R. Amini M. Alizadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  266 - The Effect of Twinning on Texture Evolution of AZ63 Magnesium Alloy During Hot Working
  M. Kavyani G. R. Ebrahimi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  267 - In-situ fabrication of titanium metal powder incorporated AA3003 /Al3Ti alloy composite by friction stir processing
  M. Zadali M. kotiani K. Ranjbar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  268 - Feasibilty Study of AZ31/Al2O3 Surface Nanocomposite Fabrication Via Friction Stir Processing
  مهدی Azizieh مهدی Boroujerdnia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  269 - Large Eenhancement in Mechanical Properties of Al 2024 Alloy After Single Rolling Pass
  M. میرزایی M. روشن S. جوادپور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  270 - A New Method to Investigate Localized Corrosion on 2024, 7075 and 6061 Aluminium Alloys in the Sea-Like Atmosphere Environments
  S. S. Azimi Abarghoui A. Saatchi R. Ebrahimi Kahrizsangi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  271 - Mechanical and Physical Properties Laser and GTA Welding of Commercial Pure Titanium
  S.GH. رضوی M. سبکتکین ریزی M. طاهری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  272 - Effect of Cooling Rate and Grain Refining Agents on Microstructure Characteristics of Al-Cu Alloys by Computer- Aided Cooling Curve Method
  M. Dehnavi M. Haddad-Sabzevar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  273 - Preparation of Super-High Strength Bimodal Aluminum Based Nanocomposite Via Mechanical Alloying and Hot Extrusion
  A. Abdollahi A. Alizadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  274 - The formation process of nanocrystalline permalloy by electroplating and optimization the surface conditions for alloy coatings
  S. Fazli M.E. Bahrololoom
• Open Access Article
  • Abstract Page
  • Full-Text
  
  275 - Investigation of microstructure and hardness of surface composite AA5086(H116)/ZrO2 and surface hybrid composite AA5086(H116)/ZrO2/Gr fabricated by friction stir processing
  H. Masroor K. Janghorban H. Danesh Manesh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  276 - Fracture Resistance Improvement of Micro Alloy Steel Weld in Four Wire Submerged Arc Welding by applying One and Two Thermal Cycles
  M.S. Moeinifar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  277 - Comparison of microstructures and mechanical properties of Al 7075 alloy obtained from conventional modified SIMA processes
  M. Karamouz M. Alizadeh A.R. Ahmadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  278 - Effect of Ablation Casting on Microstructure of a Magnesium Alloy
  M. Ghasvari S. M. Boutorabi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  279 - The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying
  M. Amini R. Amini M. Haghighi M. Alizadeh M.A. Zareh Z. Nemati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  280 - Fabrication of Ti Bulk amorphous alloys by mechanical alloying and plasma sintering methods and evaluation of structure and corrosion behavior
  Hossein  Naseri Behnam Lotfi Zohreh Sadeghian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  281 - The Evaluation of MAR-M247 Microstructural Changes after Standard Heat Treatment and Creep Test
  Arman Rabieifar Mostafa Erfan Narges Shahidi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  282 - Additive Manufacturing in the Development of Ni-Base Superalloys
  khashayar momen zahrasadat seyedraoufi Mehrdad Abbasi