A Comprehensive Review of Thermal Barrier Coatings Microstructure with Different Platinum-Modified Aluminide Bond Coats
Subject Areas : Journal of Environmental Friendly Materials
1 - Advanced Materials Engineering Research Center, Karaj Branch, Islamic Azad University, Karaj, Iran
Keywords: thermal barrier coating, Air Plasma Spray, Pt-Aluminide Bond Coat, Diffusion Coating, Ni-Based Superalloy,
Abstract :
[1] R. C. Reed: The Superalloys-Fundamentals and Applications, Cambridge University Press, New York, (2006), 261
[2] P. Lindloff: Space Engineering: Structural Materials Handbook- Part 5: New Advanced Materials, Advanced Metallic Materials, General Design Aspects and Load Transfer and Design of Joints, ESA Requirements & Standards Division, ESTEC, Noordwijk, (2011), 58.
[3] D. Francois, A. Pineau and A. Zaoui: Mechanical Behaviour of Materials-Solid Mechanics and Its Application.Chapter 8: Creep-Fatigue-Oxidation Interaction, Springer, Dordrecht, (2013), 407.
[4] D. J. Leo, M. J. Walsh, D. Mclashlan, and A. M. Kursunsky, Int. J. Fatigue, 31(2009), 1966.
[5] T. K. Kim, J. Yu and J. Y. Jeon, Metall. Mater. Trans. A, 23A(1992), 2581.
[6] R. W. Fawley: The Superalloys, Wiley, New York, (1972), 312.
[7] I. Gurrappa, I. V. S. Yashwanth and I. Mounika: Gas Turbines - Materials, Modeling and Performance, Chapter 3: The Importance of Hot, Corrosion and its Effective Prevention for Enhanced Efficiency of Gas Turbines, INTECH Publication, New York, (2015), 55.
[8] D. Driver, D. W. Hall, and G. W. Meetham: The Gas Turbine Engine, the Development of Gas Turbine Materials, Springer, London, (1981), 175.
[9] U. Schulz, K. Fritscher, C. Leyens, M. Peters and W. A. Kaysser, JOM, 49(1997), 370.
[10] M. Góral, P. Sosnowy, J. Achiev. Mater. Manuf. Eng., 55(2012), 912.
[11] K.A. Marino, E.A. Carter, Acta Mater. , 58(2010), 2726.
[12] M. Góral, M. Pytel, W. Cmela and M. Drajewicz, Solid State Phenom. , 227(2015), 321.
[13] D. R. Clarke, M. Oechsner and N.P. Padture, MRS Bull., 37(2012), 891.
[14] A. Afrasiabi, M. Saremi and A. Kobayashi, Mater. Sci. Eng. A, 478(2008), 264.
[15] X. Chen, Y. Zhao, L. Gu, B. Zou, Y. Wang and X. Cao, Corros. Sci., 53(2011), 2335.
[16] X. Chen, Y. Zhao, X. Fan, Y. Liu, B. Zou, Y. Wang, H. Ma and X. Cao, Surf. Coat. Technol., 205(2011), 3293.
[17] Y. Wang and G. Sayre, Surf. Coat. Technol., 203(2009), 2186.
[18] D. R. Clarke, Surf. Coat. Technol., 163 (2003), 67.
[19] Y. He, K. N. Lee, S. Tewari and R. A Miller, J. Therm. Spray Technol., 9(2000), 59.
[20] D. Zhou, O. Guillon and R. Vaßen, Coatings, 7(2017), 1.
[21] V. Postolenko, Failure mechanisms of thermal barrier coatings for high temperature gas turbine components under cyclic thermal loading, Ph.D Thesis, Kiev University, Kiev, Ukraine (2008).
[22] H. Zhao, Low conductivity thermal barrier coatings, Ph.D Thesis, the School of Engineering and Applied Science, University of Virginia, Virginia, USA (2009).
[23] T. M. Pollock, D. M. Lipkin and K. J. Hemker, MRS Bull., 37(2012), 923.
[24] A. Rabieifar, S. Nategh, M.R. Afshar and H. Najafi, Mater. Res. Express, 7(2020), 1.
[25] Q. Hongyu, Y. Xiaoguang and W. Yamei, Int J Fract. , 157(2009), 71.
[26] J. R. Nicholls, N. J. Simms, W. Chan and H. E. Evans, Surf. Coat. Technol., 149(2002), 236.
[27] Z. G. Liu, J. H. Ouyang, Y. Zhou and X. L. Xia, J. Eur. Ceram. Soc., 29(2009), 2423.
[28] Y. Liu, T. Nakamura, V. Srinivasan, A. Vaidya, A. Gouldstone and S. Sampath, Acta Mater., 55(2007), 4667.
[29] S. Sampath, U. Schulz, M. O. Jarligo and S. Kurod, MRS Bull., 37(2012), 903.
[30] S. Kurod and T.W. Clyne, Thin Solid Films, 200(1991), 49.
[31] D. D. Hass, Thermal Barrier Coatings, Directed Vapor Deposition of Thermal Barrier Coatings, Ph.D Thesis, the School of Engineering and Applied Science, University of Virginia, Virginia, USA (2000).
[32] A. Kawasaki and R. Watanabe, Mater. Sci. Forum, 308-311(1999), 402.
[33] A. Feuerstein, J. Knapp, T. Taylor, A. Ashary, A. Bolcavage and N. Hitchman, J. Therm. Spray Technol., 17(2008), 199.
[34] S. Bose: High Temperature Coatings, Elsevier, Amsterdam, (2007), 145.
[35] U. Leushake, T. Krell, U. Schulz, M. Peters, W. A. Kaysser and B. H. Rabin, Surf. Coat. Technol., 94(1997), 131.
[36]. A. Keyvani, M. Saremi and M.H. Sohi, J. Alloys Compd., 506(2010), 103.
[37] Z. Chen, N. Q. Wu, J. Singh and S. X. Mao, Thin Solid Films, 443(2003), 46.
[38] H. Singh, S. S. Chatha, H. S. Sidhu and K. Sharma, Int. J. Adv. Robot. Syst., 3(2011), 85.
[39] Z. Zhan, Z. Liu, J. Liu, L. Li, Z. Li and P. Liao, Appl. Surf. Sci., 256(2010), 3874.
[40] J. Liu, H. J. Choi and Y. H. Sohn, 47th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, American Institute of Aeronautics and Astronautics, Florida, (2009), 94.
[41] K. Shirvani, M. Saremi, M. A. Nishikata and T. Tsuru, Mater. Trans., 43(2002), 2622.
[42] J. W. Lee and Y. C. Kuo, Surf. Coat. Technol., 201(2006), 3867.
[43] R. Swadzba, M. Hetmańczyk, J. Wiedermann, L. Swadzba, G. Moskal, B. Witala and K. Radwański, Surf. Coat. Technol., 215(2013), 16.
[44] N. Vialas and D. Monceau, Surf. Coat. Technol., 201(2006), 3846.
[45] R. E. Malush, P. Deaband and D.H. Boone, Surf. Coat. Technol., 36(1988), 13.
[46] B. A. Pint, J. A. Haynes and Y. Zhang, Surf. Coat. Technol., 205(2010), 1236.
[47] K. Shirvani, S. Firouzi and A. Rashidghamat, Corros. Sci., 55(2012), 378.
[48] R. Swadźba, J. Wiedermann, M. Hetmańczyk, L. Swadźba, B. Mendala, B. Witala and Ł. Komendera, Surf. Coat. Technol., 237(2013), 16.
[49] Y. Q. Wang and G. Sayre, Surf. Coat. Technol., 203(2008), 256.
[50] G. P. Cammarota, A. Casagrande and G. Sambogna, Surf. Coat. Technol., 201(2006), 230.
[51] C. T. Liu, J. Ma, X. F. Sun and P. C. Zhao, Surf. Coat. Technol., 204(2010), 3641.
[52] R. Streiff and D. H. Boone, J. Mater. Eng., 10(1988), 15.
[53] W. Goward and D. H. Boone, Oxid. Met., 3(1971), 475.
[54] G. Lehnert and H. Meinhardt, Surf. Coat. Technol., 1(1972), 71.
[55] G. C. Fryburg, F. J. Kohl and C. A. Stearns, J. Electrochem. Soc., 131(1984), 2958.
[56] M. R. Jackson and J. R. Rairden, Metall Trans. A, 8A(1977), 1697.
[57] J. A. Conner, Int. Gas Turbines and Aeroengines Congress and Exposition, ASME, Cologne, (1992), 1.
[58] R. L. Penven, W. Levason and D. Pletcher, J. Appl. Electrochem., 22(1992), 415.
[59] S. J. Hemsley and W. Zhou, Trans. Inst. Met. Finish. , 88(2010), 11.
[60] D. K. Das, Prog. Mater. Sci., 58(2013), 151.
[61] G. W. Goward, Surf. Coat. Technol., 108-109(1998), 73.
[62] D. K. Das, V. Singh and S. V. Joshi, Metall Mater. Trans. A, 31A(2000), 2037.
[63] J. Benoist, K. F. Badawi, A. Malie and C. Ramade, Surf. Coat. Technol., 194(2005), 48.
[64] F. Pedraza, A. Kennedy, J. Kopecek and P. Moretto, Surf. Coat. Technol., 200(2006), 4032.
[65] Y. Q. Wang and G. Sayre, Surf. Coat. Technol., 203(2009), 1264.
[66] D. K. Das, V. Singh and S. V. Joshi, Oxid. Met. , 57(2002), 245.
[67] H. M. Tawancy and M. Al-Hadhrami, J. Eng. Gas Turbine Power, 134(2012), 012101.
[68] J. Angenete and K. Stiller, Surf. Coat. Technol. , 150(2002), 107.
[69] G. R. Krishna, D. K. Das, V. Singh and S. V. Joshi, Mater Sci. Eng A, 251(1998), 40.
[70] D. K. Das and J. Annapurna, Development of Pt-aluminide coatings on CM-247 Ni-base superalloy: A preliminary study on mechanism of coating formation, Defence metallurgical research center, Hyderabad, (1996), 187.
[71] Y. Li, S. Li, C. Zhang, N. Xu and Z. Bao, Crystals, 11(2021), 972.
[72] D. K. Das, B. Gleeson, K. S. Murphy, S. Ma and T. M. Pollok, Mater. Sci. Technol., 25(2009), 300.
[73] P. Audigie, S. Selezneff, A. V. Put, C. Estourne, S. Hamadi and D. Monceau, Oxid. Met. , 81(2014), 33.
[74] T. A. Kircher, B. G. Mc Mordieand and A. McCarter, Surf. Coat. Technol., 68-69(1994), 32.
[75] G. J. Tatlock, T. J. Hurd and J. S. Punni, Platin Met. Rev., 31(1987), 26.
[76] J. G. Fountain, F. A. Golightly, F. H. Scott and G. C. Wood, Oxid Met., 10(1976), 341.
[77] D. J. Young: High Temperature Oxidation and Corrosion of Metal, Elsevier, Amsterdam, (2008), 214.
[78] J. H. W. De Wit and P. A. Van Manen, Mater. Sci. Forum., 154(1994), 109.
[79] G. R. Johnston, J. L. Cocking and W. C. Johnson, Oxid Met., 23(1985), 237.
[80] S. B. Newcomb, W. M. Stobbs, Proc. Conf. on elevated temperature coatings: science and technology II, Metals Mater. Soc. Anaheim, California, (1996), 265.
[81] K. L. Luthra and H. S. Spacil, J. Electrochem. Soc., 129(1982), 649.
[82] I. M. Allam, H. C. Akuezue and D. P. Whittle, Oxid Met., 14(1980), 517.
[83] B. A. Pint, I. G. Wright, W. Y. Lee, Y. Zhang, K. Prubner and K. B. Alexander, Mater. Sci. Eng. A, 245(1998), 201.
[84] H. Svensson, M. Christensen, P. Knutsson, G. Wahnström and K. Stiller, Corros. Sci., 51(2009), 539.
[85] N. Birks, G. H. Meier and F. S. Petit: Introduction to the High Temperature Oxidation of Metals, Cambridge University Press, New York, (2006), 275.
[86] K. M. Carling, E. A. Carter, Acta. Mater., 55(2007), 2791.
[87] A. H. Heuer and D. B. Hovis, J. Am. Ceram. Soc., 94(2011), 146.
[88] B. A. Pint, Oxid Met., 45(1996), 1.
[89] X. Tan, X. Peng and F. Wang, Corros. Sci., 85(2014), 280.
[90] K. A. Marino and E. A. Carter, Acta Mater., 56(2008), 3502.
[91] P. Kiruthika and A. Paul, Philos. Mag. Lett., 95(2015), 138.
[92] B. Hinnemann and E. A. Carter, J. Phys. Chem., 111(2007), 7105.
[93] H. Svensson, J. Angenete and K. Stiller, Surf. Coat. Technol., 177-178(2004), 152.
[94] R. Prescott and M. J. Graham, Oxid Met., 38(1992), 233.
[95] C. Leyens, B. A. Pint and I. G. Wright, Surf. Coat. Technol., 133(2000), 15.
[96] D. Liu, P. E. Flewitt and M. Pavier, Procedia Manuf., 3(2014), 1729.
[97] B. A. Pint, Surf. Coat. Technol., 188-189(2004), 71.
[98] J. A. Haynes, K. L. More, B. A. Pint, I. G. Wright, K. Cooley and Y. Zhang, Mater. Sci. Forum, 369-372(2001), 679.
[99] P. Y. Hou and V. K. Tolpygo, Surf. Coat. Technol., 202(2007), 623.
[100] B. A. Pint and K. L. More, J. Mater. Sci., 44(2009), 1676.
[101] K. A. Unocic, C. M. Parish and B. A. Pint, Surf. Coat. Technol., 206(2011), 1522.
[102] Y. Zhang, W. Y. Lee, J. A. Haynes, I. G. Wright, B. A. Pint, K. M. Cooley and P. K. Liaw, Metall. Mater. Trans. A, 30A(1999), 2679.
[103] Y. Zhang, J.A. Haynes, W.Y. Lee, I.G. Wright, B.A. Pint, K.M. Cooley and P.K. Liaw, Metall. Mater. Trans. A, 32A(2001), 1727.
[104] N. Otsuka and R.A. Rapp, J. Electrochem. Soc., 137(1990), 46.
[105] B. Baufeld and U. Schulz, Surf. Coat. Technol. , 201(2006), 2667.
[106] Y. Tamarin: Protective Coatings for Turbine Blades, ASM Int., Ohio, (2002), 55.
[107] S. Chen, F. Ke, M. Zhou and Y. Bai, Acta Mater., 55(2007), 3169.
[108] S. J. Hong, G. H. Hwang, W. K. Han and S. G. Kang, Surf. Coat. Technol., 203(2009), 3066.
[109] M. Yavorska and J. Sieniawski, Arch. Mater. Sci. Eng., 45(2010), 56.
[110] J. Benoist, K. F. Badawi, A. Malie and C. Ramade, Surf. Coat. Technol., 182(2004), 14.
[111] K. G. S. Thomas and M. Hertter, Surf. Coat. Technol., 120-121(1999), 84.
[112] A. C. Karaoglanli, K. M. Doleker, B. Demirel, A. Turk and R. Varol, Appl. Surf. Sci., 354(2015), 314.
[113] J. H. Lee, P. C. Tsai and J. W. Lee, Thin Solid Films, 517(2009), 5253.
