Evaluation Microstructure and Hardness of the Fe-Cr-C Hardfacing Alloy with Cr/C=6 Ratio
Subject Areas : Journal of Environmental Friendly Materials
1 - Department of Materials Engineering, Karaj Branch, Islamic Azad University, Karaj, Iran
Keywords: SEM, Microstructure, Surface modification, Alloys, Cr/C=6,
Abstract :
[1] Y. F. Liu, Z. Y. Xia, J. M. Han, G. L. Zhang and S. Z. Yang, Surf. Coat. Technol., 201, (2006) 863.
[2] J. J. Coronado, H. F. Caicedo and A. L. Gomez, Tribol. Int., 42, (2009), 745.
[3] M. Erolgu, Surf. Coat. Tech., 203, (2009), 2229.
[4] K. Y. Lee, S. H. Lee, Y. Kim, H. S. Hong, Y. M. Oh and S. J. Kim, Wear, 225, (2003), 481.
[5] S. Buytoz, M. M. Yildirim and H. Eren, Mater. Lett., 59, (2005), 607.
[6] M. Kirchgabner, E. Badisch and F. Franek, Wear, 265, (2008), 772.
[7] J. Liu, L. Wang and J. Huang, J. Univ. Sci. Technol. Beijing, 13, 6, (2006), 538.
[8] S. Atamert and H. K. D. H. Bhadeshia, Mater. Sci. Eng. A, 130, (1990), 101.
[9] E. Zumelzu, I. Goyos, C. Cabezas, O. Poitz and A. Parada, Mater. Process. Technol., 128, (2002), 250.
[10] C. M. Chang, Y. C. Chen and W. WU, Tribol. Int., 43, (2010), 929.
[11] R. Dasgupta, R. Thakur, M. S. Yadav and A. K. Jha, Wear, 236, (1999), 368.
[12] A. K. Jha, B. K. Prasad, R. Dasgupta and O. P. Modi, J. Mater. Eng. Perform., 8, 2, (1999), 190.
[13] D. K. Dwiredi, Mater. Sci. Technol., 20, (2004), 1326.
[14] Y. F. Liu, J. M. Han, R. H. Li, W. J. Li, X. Y. Xu, J. H. Wang and S. Z. Yang, Appl. Surf. Sci., 252, (2006), 7539.
[15] R. Choteborsky, P. Hrabe, M. Muller, J. Sarkoca and M. Jirka, Res. Agr. Eng., 4, 54, (2008), 192.
[16] J. B. Cheng, B. S. XU, X. B. Liang and Y. W. Wu, Mater. Sci. Eng. A, 492, (2008), 407.
[17] V. E. Buchanan, P. H. Shipwey, D. G. MC Cartney, Wear , 263, ( 2007), 99.
[18] M. F. Buchely, J. C. Gutierrez, L. M. Leon and A. Toro, Wear, 259, (2005), 52.
[19] C. M. Chang, C. M. Lin, C. C. Hsieh, J. H. Chen and W. Wu, J. Alloys Compd., 487, (2009), 83.
[20] C. M. Chang, C. M. Lin, C. C. Hsieh, J. H. Chen, C. M. Fan and W. Wu, Mater. Chem. Phys., 117, (2009), 257.
[21] M. Eroglu and N. Ozdemir, Surf. Coat. Technol., 154, (2002), 209.
[22] W. K. Collins and J. C. Watson, Mater. Charact., 24, 4, (1990), 379.
[23] S. D. Carpenter and D. Carpenter, Mater. Lett., 57, (2003), 4456.
[24]C. M. Lin, C. M. Chang, J. H. Chen, C. C. Hsieh and W. Wu, Metall. Mater. Trans. A, 40A, May, (2009), 1031.
[25] S. Buytoz, Mater. Lett., 60, (2006), 605.
[26] D. Li, L. Liu, Y. Zhang, C. Ye, X. Ren, Y. Yang and Q. Yang, Mater. Des., 30, (2009), 340.
[27] A. Bondar, V. Ivanchento, A. Kozbv and J. C. Todenac, Group IV – Springer-Verlag Berlin Heidelberg, Vol. 11, ( 2008) 1.
[28] O. N. Dogan, J. A. Hawk and G. Laird II, Metall. Mater. Trans. A, 28A, June (1997), 1315.
[29] K. Yamamoto, M. M. Liliac and K. Ogi, Int. J. Cast. Met. Res., 16, 4, (2003), 435.
[30] C. M. Chang, L. H. Chen, C. M. Lin, J. H. Chen, C. M. Fan and W. Wu, Surf. Coat. Technol., 205, (2010), 245.
[31] R. J. Chung, X. Tang, D. Y. Li, B. Hinckley and K. Dolman, Wear, 301, (2013), 695.
[32] H.Sabet, SH. Kheirandish, SH,Mirdamadi, M.Goodarzi, Tirb.lett, Vol. 44, (2011), 237
[33] J. H. Chen, C. C. Hsieh, P. S. Hua, C. M.Chang, C. M. Lin, P. Ti-Y. Wu and W. Wu, Met. Mater. Int., Vol. 19, No. 1 (2013), 93.
