Mechanical Alloying and Spark Plasma Sintering of Equiatomic AlCoCrFeMnNi High Entropy Alloy
Subject Areas :
Materials synthesis and charachterization
Farhad Abdi
1
(
Department of Materials Engineering, University of Tabriz, Tabriz, Iran
)
Hossein Aghajani
2
(
Department of Materials Engineering, University of Tabriz, Tabriz, Iran; School of Metallurgy and Materials Engineering, Iran University of Science and Technology, Tehran, Iran
)
Shahin Khameneh Asl
3
(
Department of Materials Engineering, University of Tabriz, Tabriz, Iran
)
Received: 2021-09-11
Accepted : 2021-12-22
Published : 2022-01-01
Keywords:
References:
K. Tang, The Process Fundamentals and Parameters of Electro-Spark Deposition, Waterloo, Ontario, Canada, 2009.
Environmental Security Technology Certification Program (ESTCP), Electrospark Deposition for Depot- and Field-Level Component Repair and Replacement of Hard Chromium Plating, U.S. Department of defense, Project WP-0202, 2006.
sharghivand. H. Aghajani, M. Roostaei: FeNiCrAlCoMn High Entropy Alloy Coating Prepared on Ti6Al4V by ESD, Imat 2018, Tehran, Iran, 2018.
Liu, W. Gao, Z. Li, H. Zhang and Z. Hu, Electro-spark deposition of Fe-based amorphous alloy coatings, Materials Letters 61 (2007) 165–167.
Praveen, H.S. Kim, High- Entropy Alloys: Potential candidates for High-Temperature Applications-An Overview, Adv. Eng.Mater. 20 (2018) 1700645.
Li, P. L., Peter K. Liaw, Microstructure and properties of high-entropy alloy films and coatings: a review, Mater. Res. Lett, 6 (2018) 199-229.
Stepanoy, M. Tikhonovsky, N. Yurchenko, D. Zyubkin, M. Klimova, S. Zherebstove, A. Efenov, G. Salishchev, “Effect of cryo-deformation on structure and properties of CoCrFeMnNi high-entropy alloy, Intermetallics, 2015, 59, 8-17.
Sckuh, F. Mendez-Martin, B. Volker, E.P. George, H. Clements, R. Pipan, A. Hohenwarter, Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after sever plastic deformation, Acta Mater. 96 (2015) 258-268.
M-R. Chen, S-J. Lin, J-W. Yeh, M-H. Chung, S-K. Chen, Y-S. Huang, Effect of vanadium addition on the microstructure, hardness, and wear resistance of Al0.5CoCrFeMnNi high-entropy alloy, Metal. Mater. Trans. A 37 (5) (2006), 1363-1369.
Y. He. W. H. Liu, H. Wang, Y. Wu. X.J. Liu, T. G. Nieh, Z.P. Lu, Effects of Al addition on structural evolution and tensile properties of the CoCrFeMnNi high-entropy alloy system,Acta Mater. 62 (2014) 105-113.
Borkar. B. Gwalani, D. Chudhuri, C. V. Mikler, C.J. Yannerta, Xianodong Chen, ghavan Ramanujan, M. J. Styles, M. A. Gibson, R. Banerjee, A combinatorial assessment of AlXCrCuFeNi2 (0˂ X ˂ 1.5) complex concentrated alloys: microstructure, microhardness, and magnetic properties, Acta Mater. 116 (2016) 63-76.
Gwalani, V. Soni, D. Choudhuri, M. Lee, J. Y. Hwang, S. J. Nam, H. Ryu, S. H. Hong, R. Banerjee, Stability of ordered L12 and B2 precipitates in face centered cubic based hugh entropy alloys-Al0.3CoFeCrNi and Al0.3CuFeCrNi2.5Cr. Mater. 123 (2016) 130-134.
H. Liu, Y. Wu. J. Y. He, T. G. Nieh, Z. P Lu, Grain growth and Hall-Petch relationship in a high-entropy FeCrMnNiCoMn alloy, Scr. Mater. 68 (7) (2013) 526-529.
W. Yeh, S. K. Chen, S. J. Lin, J. Y. Gan, T. S. Chin, T. T. Shun, C. H. Tsau, S. Y. Chang, Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcome, Adv. Eng. Mater. 6 (2004) 299-303.
Cantor, I.T.H. Chang, P. Knight, A. J. B. Vincent, Microstructural development in equiatomic multicomponent alloys, Mater . Sci. Eng. A. 375-377 (2004) 213-218.
J. Tong, M. R. Chen, S. K. Chen, J. W. Yeh, T. T. Shun, S.J. Lin, S. Y. Chang, Mechanical perform of The AlXCrCoCuFeNi High- Entropy Alloy System with Multiprincipal Elements, Metall. Mater. Tran. A. 36 (2005) 1263-1271.
K. Huang, J. W. Yeh, T. T. Shun, S. K. Chen, Multi-Principal Element Alloy
With Improved Oxidation and Wear resistance for thermal Spray Coating, Adv. Eng. Mater. 6 (2004) 74-78.
Y. Hsu, J. W. Yeh, S. K. Chen,T.T. Shun, Wear resistance and high-temperature compression strength of FCC CuCoNiCrAl0.5 alloy with boron addition, Metal, Mater. Trans. A. 35 (2004) 1465-1469.
B. Zhang, Z. Y. Fu, J. Y. Zhang, W. M. Wang, S. W. Lee, K. Niihara, Characterization of nanocrystalline CoCrFeNiTiAl high-entropy solid solution processed by mechanical alloying, J. Alloys Compond. 495(2010) 33-38.
Singh,N. Wanderka, B. S. Murty, U.Glatzel, J. Banhart, Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy, Acta Mater. 59 (2011) 182-190.
Praveen, A. Anupam, T. Sirasani, B. S. Murty, R. S. Kottada, Characterization of oxide dispersed AlCoCrFe high entropy alloy synthesized by mechanical alloying spark plasma sintering, Trans. Indian Inst. Met. 66 (2013) 369-373.
Zhang, T. T. Zuo, Z. Tange, M. C. Gao, K. A. Dahmen, P. K. Liaw, Z. P. Lu, Microstructure and properties of high-entropy alloys, Prog. Mater. Sci. 61 (2014) 1-93.
Otto, A. Dlouhy, C. Somsen, H. Bei, G. Eggeler, E. P. George, The influences of temperature and microstructure, on the tensile properties CoCrFeMnNi high-entropy alloy, Acta Mater. 61(15) (2013) 5743-5755.
Roostaei, H. Aghajani, M. Abbasi and B. Abasht, Formation of Al2O3/MoS2 nanocomposite coatings by the use of electro spark deposition and oxidation, Ceramics International, 47 (2021) 11644-53.
R. Tan, G. P. Zhang, Q. Zhi, and Z.X. Liu, Effects of milling on the microstructure and hardness of Al2NbTi3Zr high-entropy alloy. Mater. Des. 109 (2016) 27-36.
Vaidya, A. Marshal, K. G. Ppradeep, and B. S. Murty: Phase evolution and stability of nanocrystalline CoCrFeNi and CoCrFeMnNi high entropy alloys. J. Alloys Compd. 770, (2019) 1004-15.
Ji, W. Wang, H. Wang, J. Zhang, Y.Wang, F. Zhang, and Z. Fu, Alloying behavior and novel properties of CoCrFeMnNi high-entropy alloy fabricated by mechanical alloying and spark plasma sintering. Intermetallics 56 (2014) 24-7.
Y. He,W. H. Liu, H. Wang, Y. Wu, X. J. Lui,T. G.Nieh, Z. P. Lu, Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system, Acta Mater. 62 (2014) 105-113.
Wang, W. Ji, Z. Fu, Mechanical alloying and spark plasma sintering of CoCrFeNiMnAl high-entropy alloy, Adv. Powder Technol. 25 (2014) 1334-1338.
Ge, B.Wu, S. Wang, S. Xu, C. Shang, Z. Zhang, and Y. Wang, Characterization and properties of CuZrAlTiNi high entropy alloy coating obtained by mechanical alloying and vacuum hot pressing sintering. Adv. Powder Technol. 28 (2017) 2556-63.
Xie, H. Chang, Q.Tang, W. Chen, W. Chen, and P. Dai, Effects of N addition on microstructure and mechanical properties of CoCrFeNiMn high entropy alloy produced by mechanical alloying and vacuum hot pressing sintering. Intermetallics 93 (2018) 228-34.
Cheng, W. Chen, X. Liu, Q. Tang, Y. Xie, and P. Dai, Effect of Ti and C addition s on the microstructure and mechanical properties of the FeCoCrNiMn high-entropy alloy. Mater. Sci. Eng, A 719 (2018) 192-8.
Varalakshmi, M. Kmaraj, and B.s. Murty, Processing and properties of nanocrystalline CuNiCoZnAlTi high entropy alloys by mechanical alloying. Mater. Sci. Eng. A 527 (2010) 1027-30.
Fu, W. Chen, Z. Chen, H. Wen, and E. J. Lavernia, Influence of Ti addition and sintering method on microstructure and mechanical behavior of a medium-entropy Al0.6CoNiFe alloy. Mater. Sci. Eng. A 619 (2014) 137-45.
Shivam, J. Basu, Y. Shadangi, M.K. Singh, and N.K.K. Mukhopadhyay: Mechano-chemical synthesis, stability and phase evolution in AlCoCrFeNiMn high entropy alloy. J. Alloys Compd, 757 (2018) 87-97.
Varalakshimi, G. Appa Rao, M. Kamaraj, and B.S. Murty: Hot consolidation and mechanical properties of Nano crystalline equiatomic AlFeTiCrZnCu high entropy alloy after mechanical alloying. J. Mater. Sci. 45 (2010) 5158-63.
Praveen, B. S. Murty, and R. S. Kottada: Alloying behavior in multi-component AlCoCrCuFe and NiCoCrCuFe high entropy alloys. Mater. Sci. Eng, A 534 (2012) 83-9.
Vaidya, M. Murakhnshina Garlopal: High-entropy alloys by mechanical alloying: A review, Mater. Res. 34 (2019) 664-86.
Praveen, A. Anupam, T. Sirasani, B. S. Murty, and R. S. Kottada: Characterization of oxide dispersed AlCoCrFe high entropy alloy synthesized by mechanical alloying and spark plasma sintering. Trans. Indian Inst. Met. 66 (2013) 369-73.
Colombini, R. Rosa, L. Trombi, M. Zadra, A. Casagrande, and P. Veronosi, Hugh entropy alloys obtained by field assisted powder metallurgy route: SPS and microwave heating. Mater. Chem. Phys. 210 (2018) 78-86.
Wang, Wei Ji, Zhengyi Fu: Mechanical alloying and spark plasma sintering of CoCrFeMnNiAl high-entropy alloy, Advanced Powder Technology. 25 (2014) 1334-8.
Prasad, Sh, Singh, B. B. Panigrahi: Mechanical activated synthesis of Alumina dispersed FeNiCoCrAlMn high entropy alloy. J. Alloys Compd, 692 (2017) 720-6.
W. Yeh, S.J. Lin, Breakthrough applications of high-entropy materials. J. Mater. Res. 33 (2018) 3129-37.
L. QH, Y. TM, G. ZN, et al. Microstructure and corrosion properties of AlCoCrFeNi high entropy alloy coatings deposited on AISI 1045 steel by the electrospark process. Metal Mater Trans A. 44 (2012) 1767-1778.
