Utilization of Microalloying with Rare Earth Elements and Hot Extrusion for Remarkable Grain Refinement and Enhancement of Mechanical Properties of as-Cast Magnesium Alloy

Subject Areas : Casting

Hooman Abedi ¹ , Massoud Emamy ² , Hamed Mirzadeh ³ , Jafar Rassizadehghani ⁴ , M. Ra'ayatpour ⁵

1 - School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, P.O. Box 11155-4563, Tehran, Iran
2 - School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, P.O. Box 11155-4563, Tehran, Iran
3 - School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, P.O. Box 11155-4563, Tehran, Iran
4 - School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, P.O. Box 11155-4563, Tehran, Iran
5 - School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, P.O. Box 11155-4563, Tehran, Iran

Received: 2020-05-14 Accepted : 2020-06-03 Published : 2020-11-01

Keywords:

References:

[1] Ö. Ayer,  Effect of die parameters on the grain size, mechanical properties and fracture mechanism of extruded AZ31 magnesium alloys, Materials Science and Engineering A 793 (2020) 139887.

[2] S. Lv, F. Meng, X. Lu, Q. Yang, X. Qiu, Q. Duan, J. Meng, Influence of Nd addition on microstructures and mechanical properties of a hot-extruded Mg− 6.0 Zn− 0.5 Zr (wt.%) alloy, Journal of Alloys and Compounds 806 (2019) 1166-1179.

[3] M.M. Hoseini-Athar, R. Mahmudi, R.P. Babu, P. Hedström, Effect of Zn content on the microstructural stability and grain growth kinetics of fine-grained extruded Mg–Gd–Zn alloys, Journal of Alloys and Compounds 831 (2020) 154766.

[4] I. Dinaharan, S. Zhang, G. Chen, Q. Shi, Development of titanium particulate reinforced AZ31 magnesium matrix composites via friction stir processing, Journal of Alloys and Compounds 820 (2020) 153071.

[5] J. Deng, Y.C. Lin, S.S. Li, J. Chen, Y. Ding, Hot tensile deformation and fracture behaviors of AZ31 magnesium alloy, Materials and Design 49 (2013) 209-219.

[6] M.A. Easton, M. Qian, A. Prasad, D.H. StJohn, Recent advances in grain refinement of light metals and alloys, Current Opinion in Solid State and Materials Science 20 (2016) 13-24.

[7] A.H. Blake, C.H. Cáceres, Solid-solution hardening and softening in Mg–Zn alloys, Materials Science and Engineering A 483 (2008) 161-163.

[8] F. Sayari, R. Mahmudi, R. Roumina, Inducing superplasticity in extruded pure Mg by Zr addition, Materials Science and Engineering A 769 (2020) 138502.

[9] A. Hadadzadeh, M.A. Wells, Analysis of the hot deformation of ZK60 magnesium alloy, Journal of Magnesium and Alloys 5 (2017) 369-387.

[10] K Guan, F Meng, P Qin, Q Yang, D Zhang, B Li, W. Sun, S. Lv, Y. Huang, N. Hort, J. Meng, Effects of samarium content on microstructure and mechanical properties of Mg–0.5Zn–0.5Zr alloy, Journal of Materials Science and Technology 35 (2019) 1368-1377.

[11] M. Yuan, Z. Zheng, Effects of Zn on the microstructures and mechanical properties of Mg–3Sm–0.5 Gd–xZn–0.5 Zr (x= 0, 0.3 and 0.6) alloy, Journal of Alloys and Compounds 590 (2014) 355-361.

[12] S. Wang, W. Zhang, H. Wang, J. Yang, W. Chen, G. Cui, G. Wang, Microstructures evolution, texture characteristics and mechanical properties of Mg-2.5 Nd-0.5 Zn-0.5 Zr alloy during the high strain rate hot-rolling, Materials Science and Engineering A (2020) 140488.

[13] M. Zhang, J. Zhao, M. Chen, Comparative study of the effects of CaO and Ce-La misch metal on the microstructure and properties of AZ91 alloy, Journal of Materials Research and Technology 9 (2020) 5194-5203.

[14] M. Golrang, M. Mobasheri, H. Mirzadeh, M. Emamy, Effect of Zn addition on the microstructure and mechanical properties of Mg-0.5Ca-0.5RE magnesium alloy, Journal of Alloys and Compounds 815 (2020) 152380.

[15] Stanford, Nicole, et al. "Effect of microalloying with rare-earth elements on the texture of extruded magnesium-based alloys." Scripta Materialia 59.7 (2008): 772-775.

[16] Huang, Yuanding, et al. "Role of multi-microalloying by rare earth elements in ductilization of magnesium alloys." Journal of magnesium and alloys 2.1 (2014): 1-7.

[17] Fang, Xiaogang, et al. "Effects of Ce/La misch metal content on microstructure evolution and mechanical properties of Mg-Zn-Y alloy." Materials Science and Engineering: A 699 (2017): 1-9.

[18] P. Cao, M. Qian, D.H. StJohn, Native grain refinement of magnesium alloys." Scripta Materialia 53 (2005) 841-844.

[19] S.M. Fatemi-Varzaneh, A. Zarei-Hanzaki, H. Beladi, Dynamic recrystallization in AZ31 magnesium alloy, Materials Science and Engineering: A 456 (2007) 52-57.

[20] S. You, Y. Huang, K.U. Kainer, N. Hort, Recent research and developments on wrought magnesium alloys, Journal of Magnesium and Alloys 5 (2017) 239-253.

[21] Z. Zeng, N. Stanford, C.H.J. Davies, J.F. Nie, Ni. Birbilis, Magnesium extrusion alloys: a review of developments and prospects, International Materials Reviews 64 (2019) 27-62.

[22] T. Al-Samman, G. Gottstein, Dynamic recrystallization during high temperature deformation of magnesium, Materials Science and Engineering A 490 (2008) 411-420.

[23] G. Dieter, Mechanical Metallurgy, 3^rd ed., McGraw-Hill, NewYork, 1986.

[24] H. Mirzadeh, High strain rate superplasticity via friction stir processing (FSP): A review, Materials Science and Engineering A 819 (2021) 141499.

[25] B.P. Zhang, L. Geng, L.J. Huang, X.X. Zhang, C.C. Dong, Enhanced mechanical properties in fine-grained Mg–1.0 Zn–0.5 Ca alloys prepared by extrusion at different temperatures, Scripta Materialia 63 (2010) 1024-1027.

[26] B. Pourbahari, H. Mirzadeh, M. Emamy, R. Roumina, Enhanced Ductility of a Fine‐Grained Mg–Gd–Al–Zn Magnesium Alloy by Hot Extrusion, Advanced Engineering Materials 20 (2018) 1701171.