Effect of mechanical alloying and heat treatment process on the phase transformation of Ni-Cr-Al powders mixture

Subject Areas : journal of New Materials

امیررضا شیرانی ¹ (نویسنده)
علی شکوه فر ² (نویسنده)
محمد حسین عنایتی ³ (نویسنده)

Received: 2015-12-30 Accepted : 2015-12-30 Published : 2010-09-23

Keywords: Intermetallic Compounds, CrNiAl, Mechanical alloying (MA), nanostructure materials,

Abstract :

In this study Ni₅₀Al₅₀ and Ni₂₅Cr₂₅Al₅₀ were undergone mechanical alloying and heat treatment. The structural changes of powder particles during processes were studied by X-ray diffraction (XRD). It appeared that there are different phase transformations after both treatments: Ni₅₀Al₅₀ formed a nanocrystalline, orderly NiAl intermetallic compound; on the other hand (NiCr)Al intermetallic which itself was produced from Ni₅₀Cr₂₅Al₂₅. The morphology and cross sectional area of the powder particles were characterized by scanning electron microscopy (SEM). The conclusion was that during initial stages of milling the layers of Cr, Ni, and Al are produced which subsequently are transformed into the final product upon further treatments.

References:

). Albiter, A., Salazar, M., Bedolla, E, Drew, R.A.L. 2003. Microstructure characterization of the NiAl intermetallic compound with Fe, Ga and Mo addition obtained by mechanical alloying. journal of Material Science and enginiering. A. 347: 154-164.

 (2). Stoloff, N. S, Liu, C. T , Deevi, S. C., 2000. Emerging applications of intermetallics. Intermetallics. 8: 1313-1320.

(3). Chung-kwei  Lin, Shi-Shen Hong, Pee-Yew lee. 2000. Formation of NiAl-Al₂O₃ intermetallic-matrix composite powders by mechanical alloying technique. Intermetallics. 8: 1043-1048.

(4). Suryanarayana, C, 2001. Mechanical alloying and milling. Progress in material science. 46: 1-184.

(5). Atzmon, M, 1991. Characterization of AlNi formed by a self-sustaining reaction during mechanical alloying. journal of Material Science and enginieering, A. 134: 1326-1329.

(6). Zbiral, J., Jangg, G., Sporer, D and Korb , G. 1992. Influences of heat treatments on the constitution and the recrystallization response of the γ′ - strengthened ODS-Ni-base alloy PM 3030.  Scripta Metallurgica et Materialia. 27: 1055-1060.

(7) Mashreghi, A. Moshksar, M. M. 2009. Partial martensitic transformation of nanocrystalline NiAl intermetallic during mechanical alloying. Journal of Alloys and compounds. 482: 196-198.

(8). Enayati, M.H., Karimzadeh, F., Anvari, S.Z. 2008. Synthesis of nanocrystaline NiAl by mechanical alloying. Journal of Material processing and technology. 200: 312-315.

(9). Liu, K.W., Mucklich, F., Pitschke, W., Birringer, R., Wetzig, K. 2001. Formation of nanocrystalline B₂-Structured (Ru,Ni)Al in the ternary Ru-Al-Ni system by mechanical alloying and its thermal stability. journal of Material Science and  engineering, A, 313: 187-197.

(10). Apachitei, I., Craus, L.M ., Calugaru, GH. 1997. X-ray diffraction study on Ni-Al-Se amorphization by mechanical alloying. Journal of Alloys and compounds, 260: 135-138.

 (11). Hung-Hua Sheu, Le-Chun Hsiung, Jiun-Rung Sheu, J. 2009. Synthesis of multiphase intermetallic compounds by mechanical alloying in Ni-Al-Ti system. Journal of Alloys and compound. 469: 483-487.

  (12). Williamson, G.K. and Hall, W.H.  1953. X-Ray broadening from field Aluminum and Wulfram. journal of Acta metallurgical. 1: 22-31

(13). Anjelo, L.D., Gonzalez, G., Ochoa, G. 2007. Phase transformation study on Ni₇₅Al₂₅ and  Ni₅₀Al₅₀ during mechanical alloying and sintering. Journal of alloys and compounds. 434-435: 348-353.

(14). CHEN, Sh., ZHOU, Y and Li, Y. 1997. Synthesis and Characterization Nanocrystalline Ni-Ti and Ni-Cr powders by mechanical alloying. J. Matr. Sci. Technol.13: 86-90.