Fabrication of Various Dimple Shapes and Arrays on a Hypereutectic Al-Si Alloy Using a Turning Process

Subject Areas :

Jaharah A. Ghani ¹ (Department of Mechanical and Material Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia)
Faarih Farhan Mohd Nasir Mohd Nasir ² (Department of Mechanical and Material Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia)
Mohd Nor Azam bin Mohd Dali ³ (Politeknik Ungku Omar, Jalan Raja Musa Mahadi, 31400 Ipoh, Perak, Malaysia)
Wan Fathul Hakim W. Zamri ⁴ (Department of Mechanical and Material Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia)
Mohd Shahir Kasim ⁵ (Faculty of Manufacturing Engineering, Technical University of Malaysia, Durian Tunggal, Malaysia)
Che Hassan Che Haron ⁶ (Department of Mechanical and Material Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia)

Received: 2022-04-13 Accepted : 2022-06-10 Published : 2022-02-01

Keywords:

References:

[1]   Dhingra, R. and Das, S. 2014. Life cycle energy and environmental evaluation of downsized vs. lightweight material automotive engines. Journal of Cleaner Production 85:347-358.

[2]   Hirsch, J. 2014. Recent development in aluminium for automotive application. Transactions of Nonferrous Metal Society of China, 24:1995-2002.

[3]   Zeren, M. 2007. The effect of heat treatment on aluminium-based piston alloys. Material and Design. 28:2511-2517.

[4]   Lee, J. A. 2003. Cast Aluminium Alloy for High Temperature Applications. The 132nd TMS Annual Meeting & Exhibition San Diego Convention Centre, San Diego, CA.

[5]   Holmberg, K., Andersson, P. and Erdemir, A. 2012. Global energy consumption due to friction in passenger cars. Tribology International. 47:221-234.

[6]   Holmberg, K., Andersson, P. and Nylund, N.O. Makela, K. and Erdemir, A. 2014. Global energy consumption due to friction in trucks and buses. Tribology International. 78:94-114.

[7]   Bruzzone, A. A.G., Costa, H.L., Lonardo, P.M. and Lucca, D. A. 2008. Advances in engineering surfaces for functional performance. CIRP Annals: Manufacturing Technology. 57:750 -769.

[8]   Xiaolei, W., Wei, L., Fei, Z. and Di, Z. 2009. Preliminary investigation of the effect of dimple size on friction in line contact. Tribology International. 42:1118 – 1123.

[9]   Basnyat, P., Luster, B., Muratore. C., Voevodin, A.A., Haasch, R. and Zakeri, R. 2008. Sur-face Texturing for adaptive solid lubrication. Surface & Coatings Technology. 203:73-9.

[10] Voevodin, A.A., and Zabinski, J.S. 2006. Laser surface texturing for adaptive solid lubrication. Wear. 261:1285-92.

[11] Gachot, C., Rosenkranz, A., Hsu, S.M. and Costa, H.L. 2017. A critical assessment of surface texturing for friction and wear improvement. Wear. 372 (3):21-41.

[12] Rosenkranz, A., Grützmacher, P.G., Gachot, C. and Costa, H.L. 2019. Surface texturing in machine elements− a critical discussion for rolling and sliding contacts, Advanced Engineering Materials. 21(8):190-194.

[13] Fratila, D. and Caizar, C. 2011. Application of Taguchi method to selection of optimal lubrication and cutting condition in face milling of AlMg3. Journal of Cleaner Production, 19: 640-645.

[14] Nasir, F.F.M., Ghani, J.A., Zamri, W.F.H.W. and Kasim, M.S. 2019. State-of-the-art surface texturing and methods for tribological performance, World Review of Science, Technology and Sustainable Development. 15(4):330-357.

[15] Yu, H., Deng, H., Huang, W. and Wang, X. 2011. The effect of dimple shapes on friction of parallel surfaces, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 225 (8):693-703.