• فهرست مقالات Single

      • دسترسی آزاد مقاله

        1 - Theoretical analysis on nonlinear vibration of fluid flow in single-walled carbon nanotube
        P. Valipour S. E. Ghasemi Mohammad Reza Khosravani D. D. Ganji
        AbstractIn this study, the concept of nonlocal continuum theory is used to characterize the nonlinear vibration of an embedded single-walled carbon nanotube. The Pasternak-type model is employed to simulate the interaction of the SWNTs. The parameterized perturbation me چکیده کامل
        AbstractIn this study, the concept of nonlocal continuum theory is used to characterize the nonlinear vibration of an embedded single-walled carbon nanotube. The Pasternak-type model is employed to simulate the interaction of the SWNTs. The parameterized perturbation method is used to solve the corresponding nonlinear differential equation. The effects of the vibration amplitude, flow velocity, nonlocal parameter, and stiffness of the medium on the nonlinear frequency variation are presented. The result shows that by increasing the Winkler constant, the nonlinear frequency decreases, especially for low vibration amplitudes. In addition, it is resulted that influence of the nonlocal parameter is greater at higher flow velocities in comparison with lower flow velocities. پرونده مقاله
      • دسترسی آزاد مقاله

        2 - Numerical simulation of heat transfer improvement in the divertor of fusion reactors by using Al2O3 nanofluid
        Hadighe Ashouri Abbas Ghasemizad Seyyed Mahmoud Sadatkiae Asghar Seddighzade
        AbstractThe objective of this work is to study the effect of using nanofluids as coolant on divertor system of fusion reactors which is known to be subjected to high heat loads coming from the plasma. Turbulent force convective heat transfer of water-based Al2O3 nanoflu چکیده کامل
        AbstractThe objective of this work is to study the effect of using nanofluids as coolant on divertor system of fusion reactors which is known to be subjected to high heat loads coming from the plasma. Turbulent force convective heat transfer of water-based Al2O3 nanofluid flowing through the CuCrZr cooling tube of a small scale of mock up made of five tungsten monoblocks has been numerically investigated using single phase model. Computational fluid dynamic approach has been applied by using CFD software FLUENT 6.3.26. The computed results have been validated by traditional corrections expression reported by previous works. The dependence of temperature contours and profiles on volume fraction of nanofluids for different walls of this monoblock has been studied and compared with pure water. The maximum allowed temperature of the candidate material under unusual situation of a fusion reactor has been considered and compared with the maximum temperatures resulted from the CFD results. The effects of various nanofluid concentrations and Reynolds numbers on average Nusselt number have been also investigated. The results show a significant improvement in heat removal from the divertor under the cooling of alumina/water nanofluid with respect to pure water. پرونده مقاله
      • دسترسی آزاد مقاله

        3 - مطالعه رابطه بین نوع و میزان تماشای سریال‌های ترکی زبان اصلی و سبک زندگی (بین دانشجویان دختر مجرد 20 الی 25 سال دانشگاه آزاد اسلامی واحد ارومیه)
        وحیده ترزمی‌نژاد راضیه سفیدگر
        هدف پژوهش حاضر، مطالعه رابطه بین نوع (ژانر) و میزان تماشای سریال‌های ترکی زبان اصلی ماهواره و تغییر سبک زندگی می‌باشد. روش پژوهش، پیمایشی از نوع تحلیلی است. جامعه آماری این پژوهش شامل دانشجویان دختر دانشگاه آزاد اسلامی واحد ارومیه در نیمه سال اول تحصیلی 94- 95 می‌باشد ک چکیده کامل
        هدف پژوهش حاضر، مطالعه رابطه بین نوع (ژانر) و میزان تماشای سریال‌های ترکی زبان اصلی ماهواره و تغییر سبک زندگی می‌باشد. روش پژوهش، پیمایشی از نوع تحلیلی است. جامعه آماری این پژوهش شامل دانشجویان دختر دانشگاه آزاد اسلامی واحد ارومیه در نیمه سال اول تحصیلی 94- 95 می‌باشد که حجم نمونه آن با استفاده از فرمول کوکران، تعداد 362 نفر تعیین و شیوۀ نمونه‌گیری پژوهش، تصادفی ساده و ابزار گردآوری اطلاعات، پرسشنامه است که بر‌اساس چهارچوب نظری توسط محقق طراحی شده است. داده‌ها از طریق نرم‌افزار spss تجزیه و تحلیل شده‌اند. چارچوب نظری تحقیق بر مبنای نظریات " تاثیر‌پذیری مخاطب از رسانه" هم‌چون نظریه کاشت، نظریه وابستگی مخاطب، نظریه انتظارات اجتماعی و نظریات سبک زندگی بوردیو و گیدنز استوار است. یافته‌های پژوهش نشان داد، به‌طور کل اکثریت دختران پاسخ‌گو (4/56 درصد) ادعا داشته‌اند، میزان تاثیرگذاری سریال‌های ترکی زبان بر سبک زندگی شان در حد کم می‌باشد و بین میزان تماشای سریال‌های ترکی زبان اصلی و سبک زندگی آنها رابطه معناداری وجود دارد. پرونده مقاله
      • دسترسی آزاد مقاله

        4 - An Analysis of the Spatial Structure of Cities from the Perspective of Spatial Balance in the Distribution of Functions and the Formation of Multi-Core Pattern (Case Study: Tabriz City)
        Ahmad Asadi Mohsen Ahadnejad Reveshty Hossein Tahmasebi Moghaddam
        The multi-core spatial structure is one of the important and basic topics in urban planning studies, which is considered both as a framework for evaluating urban development and as a basic spatial development goal. Considering the importance of the multi-core spatial st چکیده کامل
        The multi-core spatial structure is one of the important and basic topics in urban planning studies, which is considered both as a framework for evaluating urban development and as a basic spatial development goal. Considering the importance of the multi-core spatial structure pattern, especially for large cities with high populations and diverse and complex activities, the present study aims to evaluate the spatial structure of Tabriz city from the perspective of multi-core pattern development based on the spatial distribution of functions and population across the city. The present study employs a Quantitative Correlational Research method. The documentary method is used for data collection, and various techniques such as mean center, standard deviational ellipse, kernel density estimation, location quotient (L.Q.), nearest neighbor index, and geographically weighted regression are applied for data analysis. The study examines six functions: religious, educational, commercial, healthcare, industrial, and administrative. The findings suggest that the spatial distribution of functional cores, except for industrial and commercial functions, exhibits a single-core spatial structure in the city center. Also, the results indicate that the correlation between functional cores and the population of Tabriz city, based on the spatial regression test, is moderate. Accordingly, an imbalance in the distribution of functional cores in Tabriz City is evident. Therefore, Tabriz is located in a single-core state, and due to the increase in the distribution of administrative and medical functions in the eastern and industries in the western, it can become a multi-core model. پرونده مقاله
      • دسترسی آزاد مقاله

        5 - نتایجی پیرامون مسئله‌ی مکمل مجموعه-‌مقدار
        خدیجه بای‌پور مهدی روحی
        در این مقاله، ضمن مقایسه‌ی مسئله‌ی مکمل مجموعه-‌مقدار با مسئله‌ی مکمل تک‌مقدار، ساختار مجموعه‌ی جواب مسئله‌ی مکمل مجموعه-‌مقدار و شرایط لازم و کافی برای کرانداری و تحدب آن بررسی می‌شود. با معرفی رده‌ی جدیدی از ماتریس‌ها شرط لازم و کافی برای شدنی بودن مسئله‌ی مکمل خطی مج چکیده کامل
        در این مقاله، ضمن مقایسه‌ی مسئله‌ی مکمل مجموعه-‌مقدار با مسئله‌ی مکمل تک‌مقدار، ساختار مجموعه‌ی جواب مسئله‌ی مکمل مجموعه-‌مقدار و شرایط لازم و کافی برای کرانداری و تحدب آن بررسی می‌شود. با معرفی رده‌ی جدیدی از ماتریس‌ها شرط لازم و کافی برای شدنی بودن مسئله‌ی مکمل خطی مجموعه-‌مقدار به‌دست می‌آید. همچنین چند کاربرد از مسئله ارائه می‌گردد. پرونده مقاله
      • دسترسی آزاد مقاله

        6 - یک روش نیوتن تعمیم یافته اصلاح شده برای حل معادلات قدرمطلقی
        طاهر لطفی یاسر سیف
        در سالهای اخیر علاقه به مطالعه معادلات قدرمطلقی هم از لحاظ تئوری، هم از لحاظ عملی بسیار مورد توجه واقع شده است. دلیل اصلی این کار هم آن است که مسائل مختلفی را در بهینه سازی از جمله مسئله مکمل برنامه ریزی خطی را می توان به شکل معادله قدرمطلقی نوشت که ساده تر حل می شود. ه چکیده کامل
        در سالهای اخیر علاقه به مطالعه معادلات قدرمطلقی هم از لحاظ تئوری، هم از لحاظ عملی بسیار مورد توجه واقع شده است. دلیل اصلی این کار هم آن است که مسائل مختلفی را در بهینه سازی از جمله مسئله مکمل برنامه ریزی خطی را می توان به شکل معادله قدرمطلقی نوشت که ساده تر حل می شود. هدف اصلی این مقاله ارائه یک روش تکراری برای حل معادلات قدرمطلقی است. در واقع در این مقاله، با معرفی یک ماتریس اسکالر، یک روش نیوتن تعمیم یافته اصلاح شده برای حل معادلات قدرمطلقی ارائه شده است. این روش جدید بر اساس روش های منگسرین [1] و لی [2] به دست می آید، که اگر در ماتریس A + αI -D مقدار ضریب ماتریس همانی را مساوی صفر قرار دهیم روش منگسرین و اگر آن را برابر یک قرار دهیم به روش لی می رسیم. همچنین این روش همگرایی سراسری خطی دارد، اگر مقادیر منفرد ماتریس ضرایب بیشتر از یک باشد. پرونده مقاله
      • دسترسی آزاد مقاله

        7 - حل عددی مسأله ریلی- استوکس کسری با استفاده از توابع پایه شعاعی مکان- زمان
        نفیسه نقره ای اصغر کرایه چیان علیرضا سهیلی
        در این مقاله، جواب مسأله دو بعدی ریلی- استوکس برای یک جریان گرمایی درجه دوم تعمیم یافته با مشتق کسری ‏‎را‎‏ تقریب می‌زنیم. ‏این تقریب بر پایه استفاده از توابع ‏پایه شعاعی (‏RBFs‏) مکان- زمان و روش انتگرال گیری عددی سینک می‌باشد. در این رو چکیده کامل
        در این مقاله، جواب مسأله دو بعدی ریلی- استوکس برای یک جریان گرمایی درجه دوم تعمیم یافته با مشتق کسری ‏‎را‎‏ تقریب می‌زنیم. ‏این تقریب بر پایه استفاده از توابع ‏پایه شعاعی (‏RBFs‏) مکان- زمان و روش انتگرال گیری عددی سینک می‌باشد. در این روش، از تابع پایه ‏شعاعی گاوسین استفاده شده و بین متغیرهای زمان و مکان تمایز قائل نمی‌شویم و نقاط هم‌محلی‏، هم شامل مختصات ‏زمان و هم شامل مختصات ‏مکان هستند.‏ از روش انتگرال گیری عددی سینک با تبدیل نمایی یگانه برای تقریب قسمت انتگرالی مشتق کسری استفاده ‏‏می‌کنیم. ‏مشتق کسری، ریمان- لیوویل انتخاب شده است.روش ارائه شده روی دو مثال با مقادیر مختلف برای مرتبه مشتق کسری، پیاده سازی شده که نتایج حاصل، اثر بخشی روش را تأیید می‌کند ‏و نشان می‌دهد که با استفاده از تعداد کمی از نقاط هم‌محلی برای تابع پایه شعاعی می‌توان نتایج دقیقی بدست آورد‏.‏ لازم به ذکر است که تمامی ‏محاسبات با کمک نرم‎ ‎افزار متمتیکا انجام شده است.‏ پرونده مقاله
      • دسترسی آزاد مقاله

        8 - امنیت نوین؛ مفهومی بیناپارادایمی «مطالعه موردی؛ رویکرد امنیتی ایالات متحده آمریکا پس از جنگ سرد»
        سید عبدالعلی قوام مهدی وحیدی
        در این مقاله با بررسی گفتمانی، تاریخی، تحلیلی و پارادایمی مفهوم امنیت به دنبال آشکار کردن بخش‌های پنهان این مفهوم در روابط بین‌الملل هستیم و با ارایه توضیحات مبسوطی از تحولات مفهوم امنیت در دوران قبل و بعد از جنگ سرد، تحول نگرش تاریخی-تحلیلی به مفهوم امنیت از امنیت ملی چکیده کامل
        در این مقاله با بررسی گفتمانی، تاریخی، تحلیلی و پارادایمی مفهوم امنیت به دنبال آشکار کردن بخش‌های پنهان این مفهوم در روابط بین‌الملل هستیم و با ارایه توضیحات مبسوطی از تحولات مفهوم امنیت در دوران قبل و بعد از جنگ سرد، تحول نگرش تاریخی-تحلیلی به مفهوم امنیت از امنیت ملی تا امنیت بین‌المللی را بررسی کرده‌ایم. از سوی دیگر، با نگاهی جزء‌نگرانه به تحول پارادایمی امنیت (رئالیسم، لیبرالیسم، سازه‌انگاری) سعی در تئوریزه کردن عینی و ذهنی امنیت نمودیم، در این میان کوشیدیم که این تحول مفهومی امنیت را در سیاست خارجی ایالات متحده آمریکا نمایان سازیم. در تحلیل نهایی، نتیجه‌ای جز این بر ما میسر نگشت که جهت تجزیه و تحلیل مفهوم امنیت در حال حاضر با توجه به گستردگی این مفهوم، نیازمند یک مطالعه بیناپارادایمی و در نظر گرفتن چارچوب‌های هستی‌شناسی، معرفت شناختی و گفتمان محور امنیت در حاشیه هر تحلیل و نگرش امنیتی هستیم. پرونده مقاله
      • دسترسی آزاد مقاله

        9 - حباب‌های سفته‌بازی در بازار ارز دیجیتالی بیت‌کوین
        مجید هاتفی مجومرد ام البنین جلالی محمد رحیمی قاسم‌آبادی
        در سال‌های اخیر، ارزهای دیجیتالی توجه سرمایه‌گذاران زیادی را به خود جلب کرده‌اند. یکی از این ارزهای دیجیتالی که بیش از سایر ارزها مورد توجه قرار گرفته و در معاملات استفاده می‌شود، بیت‌کوین است. بررسی قیمت‌های بیت‌کوین حاکی از نوسانات شدید در این بازار است که احتمال حباب چکیده کامل
        در سال‌های اخیر، ارزهای دیجیتالی توجه سرمایه‌گذاران زیادی را به خود جلب کرده‌اند. یکی از این ارزهای دیجیتالی که بیش از سایر ارزها مورد توجه قرار گرفته و در معاملات استفاده می‌شود، بیت‌کوین است. بررسی قیمت‌های بیت‌کوین حاکی از نوسانات شدید در این بازار است که احتمال حبابی بودن آن را افزایش می‌دهد. در این راستا با استفاده از داده‌های ماهانه در دوره زمانی 08/2013 تا 01/2018 حبابی بودن این بازار و نوع حباب‌های موجود از حیث یگانه یا چندگانه بودن مورد بررسی قرار گرفت. روش مورد استفاده در این مطالعه ریشه واحد بازگشتی چوله به راست است که در قالب روش‌های SADF، RADF و GSADF مورد استفاده قرار گرفت. آزمونRADFچهار دوره حبابی (03/ 2015- 04/ 2015، 12/ 2015 03/ 2016، 07/ 2016- 01/ 2017، 09/ 2017 محو نشده است) را نشان داد که دارای ساختار یگانه بودند.همچنینآزمونSADF نیز یک دوره حبابی بلندمدت پیوسته (08/ 2016- محو نشده است) که دارای ساختار یگانه را نشان داد. بر مبنای آزمونGSADFسه دوره حبابی (03/ 2015- 05/ 2015، 12/ 2015- 03/ 2016، 07/ 2016- محو نشده است) وجود داشت که دو دوره دارای ساختار یگانه (03/ 2015- 05/ 2015، 12/ 2015- 03/ 2016) و دوره سوم دارای ساختار چندگانه (07/ 2016- محو نشده است) بودند پرونده مقاله
      • دسترسی آزاد مقاله

        10 - Electronic effects on singlet-triplet energy splittings in aryl-cyclopentadienylidenes
        M. Mahmodi Hashemi M. Mirzaei
        Energy gaps, AXsar (X=E, H and G) (AX.,.,-=lia,„,,,InrX“dpka,) between single (s) and triplet (I) states werecalculated at B3LTP/6-3 I 1.HO" level of theory. Our results showed that electron donating substituents(G = -NHz, -OH. -CH), -F, -Cl and -Br) at phen چکیده کامل
        Energy gaps, AXsar (X=E, H and G) (AX.,.,-=lia,„,,,InrX“dpka,) between single (s) and triplet (I) states werecalculated at B3LTP/6-3 I 1.HO" level of theory. Our results showed that electron donating substituents(G = -NHz, -OH. -CH), -F, -Cl and -Br) at phenyl group cause to increase and electron withdrawingsubstiluents (G -CF2. and -NO:) lead to decrease the singlet-triplet energy gaps of Ar - Cana CT پرونده مقاله
      • دسترسی آزاد مقاله

        11 - Physical adsorption between mono and diatomic gases inside of Carbon nanotube with respect to potential energy
        B. Esfandiari M. Monajjemi
        In this paper we have down three theoretical study by using Monte Carlo simulation and Mm+,AMBER and OPLS force field. The calculations were carried out using Hyper Chem professional,release 7.01 package of program. first we have studied the interaction of H2 molecule a چکیده کامل
        In this paper we have down three theoretical study by using Monte Carlo simulation and Mm+,AMBER and OPLS force field. The calculations were carried out using Hyper Chem professional,release 7.01 package of program. first we have studied the interaction of H2 molecule and He atomwith single-walled carbon nanotube at different temperature. For doing this study we placed H2 andHe in the center and outside the nanotube, permitting them to close the nearest carbon atom fromnanotube. Then we plotted the potential energy versus distance of interaction, and at minimum pointof energy we calculated potential energy for physical adsorption process. Second we placed tow H2molecules and tow He atoms at tow ends of nanotube separately, permitting them to close each otherstep by step then we calculated Ekin,Epot and Etot for H2---H2 and He---He interaction at differenttemperature. In another activity we added 2 to 100 H2 molecules and 2 to 100 He atoms across thenanotube and after each time increased the number of H2 and He we have estimated the potentialenergy, then we plotted the potential energy versus the number of H2 molecules and He atoms so thatthe shape of potential curve will be determined. پرونده مقاله
      • دسترسی آزاد مقاله

        12 - Singlet-Triplet Energy Splitting of Divalent Five-Membered Ring NI2C2H2C (M = N,P, As and Sb)
        M. M. Hashemi M. Mirezaei
        In recent work, thermal energy gaps. AE, it °PUPS gas, Ana; Gibbs free energy gaps, AG.,, between singlet(s) and triplet 0) states of 5.12C3H2C, I m (\4 N. P. As and Sb) were calculated and compared with thoseanalogues. MC2113C, (M= CIL N. P. As and Sb) at B3LYIE6-3 چکیده کامل
        In recent work, thermal energy gaps. AE, it °PUPS gas, Ana; Gibbs free energy gaps, AG.,, between singlet(s) and triplet 0) states of 5.12C3H2C, I m (\4 N. P. As and Sb) were calculated and compared with thoseanalogues. MC2113C, (M= CIL N. P. As and Sb) at B3LYIE6-311-NG" level of theory. Our itself showedthat Gibbs free energy gaps. AG, for l uu and 1 p are less than IS and I's, respectively. In contrast, the ACL., for1dd and Is, are more than 1', and I respectively. The AG,., between singlet and triplet states of If and 1'd,were changed in the order: l vt,> I As > 1>1 >1 IN; 1'Sb >1 rcs > 1>Uw, respectively. پرونده مقاله
      • دسترسی آزاد مقاله

        13 - Computational Investigation on Alcohol Nano Sensors in Combination with Carbon Nanotube; A Monte Carlo and Ab Initio Simulation
        M. Falahati M. Monajjemi
        Single walled nanotubes (SWNT) are common interested nanovehicle to make biosensors more sensitive.Carbon nanotubes (CNTs) have many distinct properties make them to be exploited to develop the nextgeneration of such nano sensors .The Keto-Enol tautomerization is one of چکیده کامل
        Single walled nanotubes (SWNT) are common interested nanovehicle to make biosensors more sensitive.Carbon nanotubes (CNTs) have many distinct properties make them to be exploited to develop the nextgeneration of such nano sensors .The Keto-Enol tautomerization is one of the most common investigatedsubjects of isomerism in this regards, sensors are devices that are able to detect and change the physicalproperties of such reactions to measurable electrical signal. Some chemicals with the properties to do Keto-Enoltautomerization are substituted to CNTs and the physico chemical properties are simulated. Hyperchem is usedas main software to design the CNT Sensor and the main physical properties are calculated after monte carlosimulation. The systems have been optimized at first by UFF method. In all situation the energy minimizationhave been done by MAC and the frilly optimized systems have transferred to Guassian98, after finaloptimization with 6-31G , 1-IF method. The stability, electrical changes and physico chemical properties werecalculated and compared to find in which situation Caffeic Acid and SWNT have the most stability state. پرونده مقاله
      • دسترسی آزاد مقاله

        14 - Modeling of the adsorption kinetics of Basic Red 46 on single-walled carbon nanotube and carboxylate group functionalized single-walled carbon nanotube
        D. Robati A. Fakhri
        The present study was carried out to investigate the potential of single-walled carbon nanotube (SWCNTs) and carboxylate group functionalized single-walled carbon nanotube (SWCNT-COOH) as alternative adsorbents for the removal of Basic Red 46 (BR 46) from contaminated w چکیده کامل
        The present study was carried out to investigate the potential of single-walled carbon nanotube (SWCNTs) and carboxylate group functionalized single-walled carbon nanotube (SWCNT-COOH) as alternative adsorbents for the removal of Basic Red 46 (BR 46) from contaminated water by using batch adsorption studies. Effects of some key operating parameters such as pH, ionic strength and contact time on the dye removal were investigated and discussed. The experimental results show that SWCNTs and SWCNT-COOH are promising adsorbents for removing BR 46. Results showed that removal of BR 46 increased with increasing contact time, pH and ionic strength. Adsorption kinetics data were modeled using the first order, the pseudo-first and pseudo-second order, Elvoich equations and intra-particle diffusion models. Results show that the pseudo-first order kinetic model was found to correlate the experimental data well. پرونده مقاله
      • دسترسی آزاد مقاله

        15 - A DEA-bases Approach for Multi-objective Design of Attribute Acceptance Sampling Plans
        S. Jafarian-Namin A Pakzad M.S. M.S. Fallah Nezhad
        Acceptance sampling (AS), as one of the main fields of statistical quality control (SQC),involves a system of principles and methods to make decisions about accepting or rejecting alot or sample. For attributes, the design of a single AS plan generally requires determin چکیده کامل
        Acceptance sampling (AS), as one of the main fields of statistical quality control (SQC),involves a system of principles and methods to make decisions about accepting or rejecting alot or sample. For attributes, the design of a single AS plan generally requires determination ofsample size, and acceptance number. Numerous approaches have been developed foroptimally selection of design parameters in last decades. We develop a multi-objectiveeconomic-statistical design (MOESD) of the single AS plan to reach a well-balancedcompromise between cost and quality features. Moreover, a simple and efficient DEA-basedalgorithm for solving the model is proposed. Through a simulation study, the efficiency ofproposed model is illustrated. Comparisons of optimal designs obtained using MOESD toeconomic model with statistical constraints reveals enhanced performance of the multiobjectivemodel. پرونده مقاله
      • دسترسی آزاد مقاله

        16 - رفتار اطلاع‌یابی پژوهشگران پژوهشگاه علوم انسانی و مطالعات فرهنگی بر اساس مدل اطلاع‌جویی غیر‌خطی فاستر
        ایوب نازی سکینه قاسم پور
        هدف: هدف این مطالعه بررسی رفتار اطلاع‌جویی پژوهشگران بین‌رشته‌ای و تک‌رشته‌‌ای حاضر در پژوهشگاه علوم انسانی و مطالعات فرهنگی بر اساس مدل غیر‌خطی فاستر به عنوان رویکردی جدید (و در تقابل با مدل های پیشین)‌ است. روش: این پژوهش به روش پیمایشی و با استفاده از پرسشنامه‌ای مح چکیده کامل
        هدف: هدف این مطالعه بررسی رفتار اطلاع‌جویی پژوهشگران بین‌رشته‌ای و تک‌رشته‌‌ای حاضر در پژوهشگاه علوم انسانی و مطالعات فرهنگی بر اساس مدل غیر‌خطی فاستر به عنوان رویکردی جدید (و در تقابل با مدل های پیشین)‌ است. روش: این پژوهش به روش پیمایشی و با استفاده از پرسشنامه‌ای محقق ساخته، بر مبنای معیارهای موجود در پایان نامه فاستر (2003)، طراحی و بر روی نمونه ای 110 نفری به صورت تصادفی اجرا شد که حاصل کار بازگشت 105 پرسشنامه بود. داده‌های موجود با استفاده از آزمون یومن ویتنی تحلیل گردید. یافته‌ها: میزان مطابقت رفتار اطلاع یابی پژوهشگران بین‌رشته‌ای و تک‌رشته‌‌ای با مدل غیر‌خطی فاستر دارای سطوح متفاوتی در کلیت و همچنین در فرایندهای سه‌گانه و بافت بود. همچنین آزمون فرضیه نیز نشان دهنده تفاوت معناداری در میزان مطابقت رفتار اطلاع‌یابی دو گروه عمده پژوهشگران مورد بررسی با مدل مذکور بود. نتیجه گیری: لزوم بازنگری در این مدل به‌ویژه در تعیین میزان وزن و اهمیت هر یک از فرایندهای سه‌گانه و بافت در مدل‌سازی فرآیند اطلاع‌یابی ضروری است. پرونده مقاله
      • دسترسی آزاد مقاله

        17 - Optimization of Single Cell Protein Production by Aspergillus niger Using Taguchi Approach
        F. Ardestani F. Alishahi
        : World population has been continuously raised and therefore due to this fact new source of foods, particularly proteins, are in demand. In recent years, single cell protein has been considered as an accepted substitute for animal and plant proteins. In this study, sin چکیده کامل
        : World population has been continuously raised and therefore due to this fact new source of foods, particularly proteins, are in demand. In recent years, single cell protein has been considered as an accepted substitute for animal and plant proteins. In this study, single cell protein production was studied in a batch submerged culture using Aspergillus niger PTCC5012. Experimental design was performed by Qualitek-4 software using Taguchi as a fractional factorial statistical method. Glucose, magnesium sulfate and potassium hydrogen phosphate concentrations as well as the pH were considered to be the four key parameters, each one at four different levels. Optimal conditions were created to achieve the maximum single cell protein of Aspergillus niger PTCC5012 in respect of the optimum concentrations of the mentioned parameters. An acceptable consistency of 94% was observed between optimum single cell protein proposed by the software and the experimentally measured one. Glucose concentration was evaluated as the most effective parameter on single cell protein production yield with 40.95% contribution. The concentration of potassium hydrogen phosphate was introduced as the less effective factor on single cell protein production with 13.99% contribution پرونده مقاله
      • دسترسی آزاد مقاله

        18 - سهم منابع طبیعی و انسان ساخت در توزیع عناصرسنگین در خاک های اطراف معدن منگنز ونارچ قم
        مریم رفعتی آرمیتا تقوی عبدالرضا کرباسی
        زمینه و هدف: هدف از انجام این مطالعه بررسی آلودگی خاک های اطراف معدن منگنز ونارچ قم به فلزات سنگین منگنز ، نیکل ، سرب و مقایسه روش های مولر و کرباسی در تعیین شاخص آلودگی و تعیین سهم طبیعی و انسان ساخت عناصرمذکور درمنطقه مورد مطالعه است. روش بررسی: جهت انجام این مطالعه 3 چکیده کامل
        زمینه و هدف: هدف از انجام این مطالعه بررسی آلودگی خاک های اطراف معدن منگنز ونارچ قم به فلزات سنگین منگنز ، نیکل ، سرب و مقایسه روش های مولر و کرباسی در تعیین شاخص آلودگی و تعیین سهم طبیعی و انسان ساخت عناصرمذکور درمنطقه مورد مطالعه است. روش بررسی: جهت انجام این مطالعه 3 نمونه به صورت سیستماتیک از عمق 5- 25 سانتی متری خاک برداشت و مخلوط شده و یک نمونه مرکب به آزمایشگاه منتقل گردید تا غلظت کل فلزات منگنز، نیکل و سرب با استفاده از دستگاه اسپکتروفتومتر در نمونه مذکور اندازه گیری گردد. سپس شاخص های زمین انباشتگی مولر ((Igeo و کرباسی ((Ipoll جهت تعیین میزان آلودگی منطقه مورد استفاده قرار گرفتند. یافته ها: نتایج مطالعه نشان داد که غلظت منگنزو نیکل، کم تر و غلظت سرب بیش تراز حداکثر میانگین غلظت قابل قبول در پوسته زمین و شیل بود. میزان Igeo برای همه فلزات بین 0 تا1 بود و میزان Ipoll بین 1 تا 2 بود،که نشان می دهد آلودگی خاک به ترتیب در رده غیرآلوده و کمی آلوده است. بحث و نتیجه گیری : شاخص ژئوشیمیایی کرباسی درتعیین آلودگی منطقه کارآمدتر ازشاخص ژئوشیمیایی مولر بوده و سهم فاز انسان ساخت عناصر سنگین به صورت سرب(16 درصد)> نیکل(8 درصد)> منگنز( 5 درصد) محاسبه شد. پرونده مقاله
      • دسترسی آزاد مقاله

        19 - ارائه یک مدل ترکیبی تصمیم‌گیری چندمعیاره و برنامه‌ریزی تخصیص جهت انتخاب شرکت‌های دفع زباله‌های بیمارستانی
        محمد امین ثابتی کرجوندانی قاسم عباسی امید امیرطاهری سهیلا خویشتن دار
        زمینه و هدف: در شرایطی که روزانه مقادیر زیادی زباله‌های بیمارستانی تولید و دفع می‌شود، ناکارآمدی در دفع بهداشتی زباله‌های بیمارستانی می‌تواند خطرات بالقوه زیست‌محیطی ایجاد نموده و هزینه‌های عملیاتی را افزایش دهد. با وجود این، بیمارستان‌ها اغلب برای ارزیابی و انتخاب مناس چکیده کامل
        زمینه و هدف: در شرایطی که روزانه مقادیر زیادی زباله‌های بیمارستانی تولید و دفع می‌شود، ناکارآمدی در دفع بهداشتی زباله‌های بیمارستانی می‌تواند خطرات بالقوه زیست‌محیطی ایجاد نموده و هزینه‌های عملیاتی را افزایش دهد. با وجود این، بیمارستان‌ها اغلب برای ارزیابی و انتخاب مناسب ترین شرکت دفع زباله، معیارهای عینی را لحاظ نکرده و در عوض بر قضاوت ذهنی و تجربیات قبلی تکیه می‌کنند. در تحقیق حاضر یک چارچوب تصمیم‌گیری برای ارزیابی و انتخاب شرکتهای دفع زباله‌های بیمارستانی ارائه شده است. هدف از این مطالعه پیشنهاد یک مدل ترکیبی تصمیم‌گیری چندمعیاره با مدل برنامه‌ریزی خطی به منظور برون‌سپاری دفع یا بازیافت ایمن پسماندهای بیمارستانی می‌باشد. روش بررسی: در این مطالعه چارچوبی ارائه می‌شود که توسط آن می‌توان در حالت برون‌سپاری منفرد و چندگانه برای دفع زباله‌های بیمارستانی تصمیم‌گیری نمود. ابتدا با مطالعه ادبیات موضوع، معیارهایی برای ارزیابی شرکتهای دفع زباله شناسایی می‌شوند. با استفاده از روش دیمتل، روابط علت و معلولی بین معیارها، مورد بررسی قرار گرفته، تأثیرگذارترین معیارها انتخاب و الگوی روابط علّی آنها در قالب یک شبکه شناسایی می‌شود. برای ارزیابی و انتخاب بهترین شرکت دفع زباله یعنی برون‌سپاری منفرد، از روش فرآیند تحلیل شبکه استفاده می‌شود. همچنین به منظور به حداقل رساندن خطر برون‌سپاری منفرد، یک مدل برنامه‌ریزی خطی برای برون‌سپاری چندگانه ارائه شده است. مدل ریاضی با هدف حداکثر نمودن مقدار زباله دفع شده توسط شرکتها، تخصیص بهینه زباله به شرکتهای دفع پسماند را تعیین می‌نماید. یافته ها: چارچوب ارائه شده برای ارزیابی و انتخاب شرکتهای دفع زباله‌های بیمارستانی در زمستان سال 1401 در تهران پیاده سازی شد. با مطالعه ادبیات موضوع 10 معیار شناسایی شدند. 6 معیار از اثرگذارترین معیارها بر مبنای روش دیمتل انتخاب شدند و شبکه روابط علّی نگاشته شد. با استفاده از روش فرایند تحلیل شبکه معیارهای ارزیابی شرکتها و شرکتهای کاندید دفع زباله وزن‌دهی شدند. معیارهای ارزیابی به ترتیب اهمیت عبارتند از نیروی انسانی شایسته، ظرفیت بازیافت و دفع، تجربه، هزینه، زیرساختهای جمع‌آوری و حمل و فناوری دفع و بازیافت زباله. همچنین حل مدل برنامه ریزی خطی با استفاده از نرم افزار لینگو تخصیص بهینه زباله به شرکتهای کاندید را مشخص نمود. بحث و نتیجه گیری: مدیران بیمارستان‌ها و مسئولان شهری کنترل آلودگی، به طور همزمان از قابلیت مدل تصمیم‌گیری پیشنهادی این مقاله برای برون‌سپاری دفع بهداشتی زباله‌ بهره‌مند خواهند شد. نتایج حاصل از به‌کارگیری چارچوب پیشنهادی نشان داد که تصمیم‌گیری مطابق این چارچوب نه تنها به نفع بیمارستان‌ها در انتخاب یک شرکت مناسب است، بلکه می‌تواند تضاد منافع و اختلاف بین بیمارستان‌ها، شرکتهای دفع بهداشتی زباله‌های بیمارستانی و مسئولان شهری کنترل آلودگی را به حداقل برساند. پرونده مقاله
      • دسترسی آزاد مقاله

        20 - سنجش حباب‌های چندگانه‌‌ در بخش مسکن (زمین و اجاره‌بها): رهیافت آزمون‌های ریشه واحد بازگشتی
        مجید هاتفی مجومرد ام البنین جلالی محمد رحیمی قاسم آبادی
        بخش مسکن یکی از بخش‌های کلیدی ایران است که از اهمیت بالایی برخوردار است. یکی از مسائلی که این بازار با آن مواجه است وجود سفته‌بازان در این بازار است که منجربه حبابی شدن این بازار و در نتیجه تحمیل هزینه‌های زیادی بر جامعه می‌شود. در این راستا تعیین حبابی بودن و تاریخ‌گذا چکیده کامل
        بخش مسکن یکی از بخش‌های کلیدی ایران است که از اهمیت بالایی برخوردار است. یکی از مسائلی که این بازار با آن مواجه است وجود سفته‌بازان در این بازار است که منجربه حبابی شدن این بازار و در نتیجه تحمیل هزینه‌های زیادی بر جامعه می‌شود. در این راستا تعیین حبابی بودن و تاریخ‌گذاری حباب‌های آن و تعیین نوع حباب‌های موجود از حیث یگانه یا چندگانه بودن می‌تواند کمک شایانی به سیاست‌گذاران نماید. با توجه به این مهم هدف مطالعه حاضر بررسی حباب‌های رخ داده در بازار مسکن (زمین و اجاره‌بها) و تاریخ‌گذاری و تعیین نوع یگانه و چندگانه بودن این حباب‌ها بود. روش مورد استفاده در این مطالعه آزمون‌های بازگشتی چوله به راست ارائه شده توسط فیلیپس و همکاران (2013) است که با روش‌های RADF و GSADF شناخته می‌شوند.نتایج این مطالعه نشان داد که تهران و کلیه مناطق شهری، شهرهای بزرگ، متوسط و کوچک در سال‌های 1382 تا 1392 در قیمت زمین و اجاره‌بها، دوره‌هایی حبابی را تجربه کرده‌اند؛ که از این میان مهم‌ترین بازه حبابی، سال‌های 1386 تا 1387 بوده است. همچنین در سال‌های 1390 تا 1392 نیز دوره‌هایی حبابی در قیمت زمین و اجاره‌بها وجود داشته است. پرونده مقاله
      • دسترسی آزاد مقاله

        21 - ارزیابی مهارت زمانسنجی بازار و به گزینی اوراق مدیران صندوقهای سرمایه‌گذاری مشترک در ایران
        هاشم نیکومرام آزاده فراهانی
        پژوهش حاضر در نظر دارد که مهارت های به گزینی اوراق و زمانسنجی بازار مدیران صندوق های سرمایه گذاری مشترک را در ایران به وسیله ارزیابی عملکرد 5 صندوق سرمایه گذاری مشترک به عنوان نمونه، در بازه زمانی ابتدای سال 1389 تا پایان سال 1393 بررسی کند. مدل های استفاده شده برای قضا چکیده کامل
        پژوهش حاضر در نظر دارد که مهارت های به گزینی اوراق و زمانسنجی بازار مدیران صندوق های سرمایه گذاری مشترک را در ایران به وسیله ارزیابی عملکرد 5 صندوق سرمایه گذاری مشترک به عنوان نمونه، در بازه زمانی ابتدای سال 1389 تا پایان سال 1393 بررسی کند. مدل های استفاده شده برای قضاوت در مورد توانایی به گزینی اوراق، تک عاملی(معیار جنسن) و چهار عاملی کارهارت است. توانایی زمانسنجی بازار نیز با استفاده از مدل ترینر- مازوی مورد ارزیابی قرار گرفت. جهت آزمون فرضیات پژوهش، از روش رگرسیون داده های سری زمانی استفاده شده است. نتایج نشان داد که در میان صندوق های موضوع پژوهش، بر طبق مدل تک عاملی(معیار جنسن)، تنها در یک صندوق آن هم در سطح اطمینان90 %، به گزینی اوراق به صورت معنادار دیده شد و در سطح اطمینان 95%، به گزینی اوراق به صورت معنادار در هیچ موردی یافت نشد. بر اساس مدل چهار عاملی کارهارت نیز، تنها در یک صندوق آن در سطح اطمینان 93%، به گزینی اوراق به صورت معنادار دیده شد و در سطح اطمینان 95% به گزینی اوراق به صورت معنادار در هیچ موردی یافت نشد. زمانسنجی بازار در 4 مورد از 5 نمونه به صورت معنی دار دیده شد که متأسفانه هر 4 مورد منفی بودند. پرونده مقاله
      • دسترسی آزاد مقاله

        22 - Robust stabilization of a class of three-dimensional uncertain fractional-order non-autonomous systems
        A. R. Haghighi M. Pourmahmood Aghababa M. Roohi
        This paper concerns the problem of robust stabilization of uncertain fractional-order non-autonomous systems. In this regard, a single input active control approach is proposed for control and stabilization of three-dimensional uncertain fractional-order systems. The چکیده کامل
        This paper concerns the problem of robust stabilization of uncertain fractional-order non-autonomous systems. In this regard, a single input active control approach is proposed for control and stabilization of three-dimensional uncertain fractional-order systems. The robust controller is designed on the basis of fractional Lyapunov stability theory. Furthermore, the effects of model uncertainties are fully taken into account. Also, the robust stability and access to the equilibrium point of the control scheme are analytically proved. Moreover, fast response and easy realization in real world applications are somespecial features of the suggested method. Finally, as a numerical simulation, control and stabilization of three-dimensional uncertain fractional-order Chen system is provided to illustrate the usefulness and applicability of the proposed approach in practice. It is worth to notice that the proposed active control approach can be employed for robust stabilization of a large class of three-dimensional uncertain nonlinear fractional-order non autonomous dynamical systems. پرونده مقاله
      • دسترسی آزاد مقاله

        23 - احکام حقوقی و اخلاقی ازدواج در قرآن
        رضا دهقان نژاد حسین بستان(نجفی)
        این مقاله دیدگاه قرآن را درباره چند مسأله اصلی در زمینه ازدواج، با تحلیل مضامین آیات مربوطه و با استفاده از آراء مفسران به‌ ویژه مفسران شیعه، مورد بررسی قرار داده است. یافته‌های این تحقیق که به روش توصیفی- تحلیلی انجام گرفته است، نشان می‌دهند که قرآن کریم به دلیل کارکرد چکیده کامل
        این مقاله دیدگاه قرآن را درباره چند مسأله اصلی در زمینه ازدواج، با تحلیل مضامین آیات مربوطه و با استفاده از آراء مفسران به‌ ویژه مفسران شیعه، مورد بررسی قرار داده است. یافته‌های این تحقیق که به روش توصیفی- تحلیلی انجام گرفته است، نشان می‌دهند که قرآن کریم به دلیل کارکردهای حیاتی ازدواج بر مطلوبیت آن به طور مطلق و کراهت تجردگزینی دلالت دارد. الگوی حمایتی قرآن از زنان مطلّقه نیز بازتاب همین تأکیدی است که بر مجرّد نماندن آنان دارد. لحن قرآن درباره تعدد زوجات، لحن توصیه و تشویق نیست، بلکه صرفاً در صدد بیان اباحه و جواز آن است. هدف قرآن از به رسمیت شناختن تعدد زوجات و ازدواج موقّت، ارائه راه‌ حلّی برای برخی ضرورت‌های اجتماعی بوده است. آنچه در قرآن کریم در خصوص معیار اصلی در همسرگزینی بر آن تأکید شده، لزوم کفویّت به معنای هم‌شأن بودن زوجین در دو محورِ کفویت در دین و کفویت در پاکدامنی می‌باشد. همچنین قرآن کریم در مسائل مهم، الگوهای همسرگزینی و نقش زن در همسرگزینی مواضع خاصی اتخاذ کرده است که از توجه این کتاب الهی به احکام حقوقی و اخلاقی ازدواج و همچنین کارکردهای اجتماعی این امور از جمله گسترش تعاملات اجتماعی، حفظ احترام و شخصیت زنان و تربیت فرزندان شایسته حکایت دارند. پرونده مقاله
      • دسترسی آزاد مقاله

        24 - Optimization of Experimental Conditions in Single-Stage Process for Preparation of Potassium Sulphate from Magnesium Sulfate and Potassium Chloride
        Elham Arshadi Babak Nahri-Niknafs Manoochehr Dastoor Seyed-Ali Sobhanian
        A method and a system for Single-Stage conversion of magnesium sulphate and potassium chloride to potassium sulphate in aqueous alcoholic solution at 50-85°C were developed. Raw magnesium chloride was a by-product formed in the process. The effects of reaction molar چکیده کامل
        A method and a system for Single-Stage conversion of magnesium sulphate and potassium chloride to potassium sulphate in aqueous alcoholic solution at 50-85°C were developed. Raw magnesium chloride was a by-product formed in the process. The effects of reaction molar ratio, methanol volume, evaporation, and magnesium chloride content on the purity and the conversion rate of potassium sulphate were studied. The product and by-product were purified and the metal ions contents were determined by Atomic absorption spectroscopy. Results showed that the washing with methanol had a certain impact on the purity and the conversion rate of potassium sulphate. The potassium sulphate reached to the qualified standard, when the molar ratio of 2KCl and MgSO4 was 1:1. The recoveries of potassium sulphate (as final product) and potassium chloride (as raw material)in an aqueous alcoholic solution compound fertilizer were approximately 80% and 12.76%, respectively. Magnesium chloride had a significant influence on the purity and the conversion rate of potassium sulphate. Purities of products throughout can be controlled by using slight circuit adjustments and/or by additional water washes. پرونده مقاله
      • دسترسی آزاد مقاله

        25 - المناسبات العائلية وفجوة الأجيال في الرواية الجزائرية المعاصرة على ضوء تحليل الخطاب الفوكوي؛ رواية "الساق فوق الساق في ثبوت رؤية هلال العشاق" لأمين الزاوي نموذجاً
        علی صباغیان کبری روشنفکر
        ازدادت حدة الخلافات حول الآراء بين مختلف أجيال الأسرة بعد ظهور التغييرات الجذرية إبان الثورة الصناعية في العالم وبعد نمو المستويات المعيشية والاقتصادية في حياة الناس وكذلك بعد تطور التعليم والاستقلال النسبي بين أفراد الأسرة التي تزامنت كلها مع زوال نظام الأسرة النواة ال چکیده کامل
        ازدادت حدة الخلافات حول الآراء بين مختلف أجيال الأسرة بعد ظهور التغييرات الجذرية إبان الثورة الصناعية في العالم وبعد نمو المستويات المعيشية والاقتصادية في حياة الناس وكذلك بعد تطور التعليم والاستقلال النسبي بين أفراد الأسرة التي تزامنت كلها مع زوال نظام الأسرة النواة التي كان لها رأس واحد وهو الأب عمومًا، حيث أدت إلى تكوين تغييرات ملحوظة وفجوة عميقة نعرفها اليوم باسم فجوة الأجيال. قدم ميشيل فوكو في القرن العشرين، نظرية واسعة تدعى "تحليل الخطاب" وأكد فيها على أن الألفاظ تملك معان مختلفة في مختلف المواقف فيمكن دراسة اختلاف المواقف بين الأجيال المختلفة على أساس تحليل الخطاب الفوكوي بأن هذه الخلافات تنبع من اختلاف المواقف، وبما أن الرواية على صلة بالمجتمع، فنحاول في هذا المقال دراسة العلاقات بين الأجيال وكذلك العلاقات الأسرية ومعالجة الفجوة الجيلية بين أعضاء الأسرة في الرواية الجزائرية المعاصرة من خلال تناول رواية "الساق فوق الساق في ثبوت رؤية هلال العشاق" لأمين الزاوي. يعتمد أسلوب البحث في هذا المقال على المنهج النقدي ونعتزم استكشاف وتفسير كيفية ومدى تأثير تغيرات المجتمع على المناسبات العائلية والخطاب السائد في الأسرة والمجتمع ضمن الرواية المعاصرة ونستمد في دراستنا من تحليل الخطاب لميشيل فوكو. فالخطاب عنده هو مجموعة من الافتراضات التي تجسد مفهومًا عامًا ويستخدم لمعرفة العوامل الخارجة من إطار النص وتأثيرها على المضمون وهو يعتبر طريقة نوعية وموضوعية لتحليل النص. لذلك لعل من أهم النقاط التي يمكن ذكرها نتيجة لهذا المقال هو استقلال أفراد الأسرة وبالتالي تعبيرهم عن الشعور الداخلي والمواقف الشخصية بحرية أكثر ونتيجة لذلك حدثت خلافات بين الأجيال والآراء المختلفة، كما أن الصراع بين التقليد والحداثة يغذي هذه الخلافات. پرونده مقاله
      • دسترسی آزاد مقاله

        26 - یافتن جوابهای بهینه با استفاده ازروش الگوریتم ژنتیک
        محبوبه بحرینی
        مفاهیم الگوریتم ژنتیک بر اساس نظریه وراثت Darwin صورت گرفته است. الگوریتم ژنتیک مفهوم تکاملی بقای نسل را تقلید می کند. چنانچه جمعیت از طریق نسلهایی از افراد توسعه پیدا کند، شایستگی و برازندگی کلی گروه افزایش می یابد. اگر شایستگی افراد خاصی برای بقا به اندازه کافی رقابت چکیده کامل
        مفاهیم الگوریتم ژنتیک بر اساس نظریه وراثت Darwin صورت گرفته است. الگوریتم ژنتیک مفهوم تکاملی بقای نسل را تقلید می کند. چنانچه جمعیت از طریق نسلهایی از افراد توسعه پیدا کند، شایستگی و برازندگی کلی گروه افزایش می یابد. اگر شایستگی افراد خاصی برای بقا به اندازه کافی رقابت آمیز نباشد، آنها محکوم به مرگ می باشند و خواص ژنتیکی آنها از جمعیت پاک می شود. بنابراین روش الگوریتم ژنتیک روشی است که از طبیعت الهام گرفته شده است. در زیر مفاهیمی را که در این روش مورد استفاده قرار می گیرند تعریف می کنیم و روش یافتن جوابهای بهینه را با استفاده از الگوریتم ژنتیک توضیح می دهیم. پرونده مقاله
      • دسترسی آزاد مقاله

        27 - کنترل پایداری گذرا با استفاده از شبیه سازی حوزه زمان در پخش بار بهینه
        مهدی مطهری افشین لشکرآرا سید علی نبوی نیاکی
        این مقاله یک روش جدید دستیابی به کنترل پایداری گذرا جهت حل مسئله پخش بار بهینه با در نظر گرفتن قید پایداری گذرا (TSCOPF) را ارائه می دهد. تازگی این تحقیق شامل استفاده از روش تک ماشین معادل (SIME) جهت اجرا و بهبود دو بخش مهم و اصلی مسئله TSCOPF می باشد. بخش اول: SIME برا چکیده کامل
        این مقاله یک روش جدید دستیابی به کنترل پایداری گذرا جهت حل مسئله پخش بار بهینه با در نظر گرفتن قید پایداری گذرا (TSCOPF) را ارائه می دهد. تازگی این تحقیق شامل استفاده از روش تک ماشین معادل (SIME) جهت اجرا و بهبود دو بخش مهم و اصلی مسئله TSCOPF می باشد. بخش اول: SIME برای تحلیل پایداری گذرای سیستم قدرت مورد استفاده قرار می گیرد. بخش دوم: SIME سیستم چند ماشنیه را به یک تک ماشین متصل به شین بی نهایت (OMIB) معادل سازی می کند. زاویه ناپایداری حاصل شده از مسیر زاویه ای OMIB معادل جهت ساختن قید پایداری گذرا مورد استفاده قرار گرفته است. در این روش، قید پایداری گذرا توسط SIME در هر تکرار روش TSCOPF گنجانده شده است تا به طور دقیق رفتار دینامیکی سیستم قدرت مشخص شود.معادلات دیفرانسیلی معرف رفتار دینامیکی ماشین های سیستم، مطابق قاعده ذوزنقه ای به معادلات جبری تجزیه شده اند. مدل پخش بار پیشنهادی بر روی سیستم 9 شینه IEEE (WECC) آزمایش و تحلیل شده است. پرونده مقاله
      • دسترسی آزاد مقاله

        28 - بررسی روش AOD و OAM برای ایجاد آرایه های تله گذاری نوری
        آیت اکبری آرمان قاسمی نوشین ربیعی علی بکتر
        تکنولوژی AODها برای عملکرد دو بعدی نوری بسیار مناسب می باشند. اخیراً مطالعات جدید از رشد تصویر برداری یا هولوگرافیک استفاده می کند که روشهای تقابل فاز نامیده می شود و برای ایجاد آرایه های تله گذاری نوری استفاده می شود در مجموع برای آرایه های تله ها، تکنولوژی هولوگرافیک چکیده کامل
        تکنولوژی AODها برای عملکرد دو بعدی نوری بسیار مناسب می باشند. اخیراً مطالعات جدید از رشد تصویر برداری یا هولوگرافیک استفاده می کند که روشهای تقابل فاز نامیده می شود و برای ایجاد آرایه های تله گذاری نوری استفاده می شود در مجموع برای آرایه های تله ها، تکنولوژی هولوگرافیک ممکن است منجر به تولید مدهای لیزری عرضی غیر معمول شود. بیم نوری لاگور-گوسین یکی از نمونه های مد انتشار نور غیر معمول می باشد که در این مقاله شرح داده می شود. پرونده مقاله
      • دسترسی آزاد مقاله

        29 - Statistical Analysis and Optimization of Factors Affecting the Spring-back Phenomenon in UVaSPIF Process Using Response Surface Methodology
        M. Vahdati R. A. Mahdavinejad S. Amini
        Ultrasonic Vibration assisted Single Point Incremental Forming (UVaSPIF) process is an attractive and adaptive method in which a sheet metal is gradually and locally formed by a vibrating hemispherical-head tool. The ultrasonic excitation of forming tool reduces the ave چکیده کامل
        Ultrasonic Vibration assisted Single Point Incremental Forming (UVaSPIF) process is an attractive and adaptive method in which a sheet metal is gradually and locally formed by a vibrating hemispherical-head tool. The ultrasonic excitation of forming tool reduces the average of vertical component of forming force and spring-back rate of the formed sample. The spring-back phenomenon is one of the most important geometrical errors in SPIF process, which appear in the formed sample after the process execution. In the present article, a statistical analysis and optimization of effective factors on this phenomenon is performed in the UVaSPIF process based on DOE (Design of Experiments) principles. For this purpose, RSM (Response Surface Methodology) is selected as the experiment design technique. The controllable factors such as vertical step size, sheet thickness, tool diameter, wall inclination angle, and feed rate is specified as input variables of the process. The obtained results from ANOVA (Analysis of Variance) and regression analysis of experimental data, confirm the accuracy of mathematical model. Furthermore, it is shown that the linear, quadratic, and interactional terms of the variables are effective on the spring-back phenomenon. To optimize the spring-back phenomenon, the finest conditions of the experiment are determined using desirability method, and statistical optimization is subsequently verified by conducting the confirmation test. پرونده مقاله
      • دسترسی آزاد مقاله

        30 - Optimal Design of Steppers in Single Step High Pressure Torsion (SIHPT) Process as a Novel SPD Method
        Mehdi Eskandarzadeh Ghader Faraji A. Masoumi Ali Kalaki
        Single Step High Pressure Torsion (SIHPT) is a newly developed HPT based method for processing of materials which is capable of producing nanostructured long samples with characteristics comparable to conventional HPT process. While, conventional HPT can be applied only چکیده کامل
        Single Step High Pressure Torsion (SIHPT) is a newly developed HPT based method for processing of materials which is capable of producing nanostructured long samples with characteristics comparable to conventional HPT process. While, conventional HPT can be applied only on thin samples; it is possible to produce nanostructured parts with about 10 cm long using SIHPT method. However, SIHPT needs some technical improvements in order to be used for production in industrial scale. One of key component of SIHPT is the steppers which help different sections of the sample to be twisted. This study investigates main parameters of Steppers including the corner radius, thickness and rotation speed. The experimental results revealed that for the lowest length of sample’s contact inside the Steppers (lower contact length) of 5mm; there is considerable slippage in pressures below 1GP. However, the amount of slippage decreases gradually by increasing the magnitude of the applied pressure and the amount of the lower contact length. Moreover, it found that the rotational speed influences the amount of slippage in low pressures (lower than 1 GPa) but not in high pressures. In addition, according to Finite Element (FE) analysis it was found that 1 mm corner radius of steppers is the optimal value for the SIHPT process. پرونده مقاله
      • دسترسی آزاد مقاله

        31 - Experimental Investigation of Pool Boiling of Single Wall Carbon Nanotubes (SWCNTs) with Different Grooved Surfaces
        Amir Vasei Moghadam Hamid Reza Goshayeshi
        The enhancements in boiling heat transfer can bring immediate benefits to improve the efficiency and cost of heat energy transfer. In this study, heat transfer coefficient in pool boiling of single wall carbon nanotube-water (SWCNTs) at a concentration of 0. 05, 0. 1 an چکیده کامل
        The enhancements in boiling heat transfer can bring immediate benefits to improve the efficiency and cost of heat energy transfer. In this study, heat transfer coefficient in pool boiling of single wall carbon nanotube-water (SWCNTs) at a concentration of 0. 05, 0. 1 and 0. 15 vol. % on smooth and grooved surfaces has been investigated experimentally at atmospheric pressure. The effect of some shapes namely circular groove, square groove and straight groove on the boiling heat transfer has been also investigated. The experimental results indicated that making different grooved surfaces and also using (SWCNTs)-water enhanced the boiling heat transfer coefficient. The highest increase in heat transfer coefficient was seen in circular grooved, which is 76% higher than the base fluid water on the smooth surface. The heat flux has been changed from 0 to 140 kW/m2. By comparing the results, the circular groove with 0.15% concentration of SWCNTs has higher heat transfer coefficient for the boiling heat transfer. Based on pool boiling surfaces, a new type of grooves pool pooling surface was designed and constructed, which is consisted of inclined circular groove at angle of 45°. Outcome of the present work definitely indicates that the inclination of the circular groove could be excellent option for the increasing of pool boiling heat transfer. Cornwel-Houston correlation has been modified to take care of the effect of grooved surfaces for correlating the Nusselt number as a function of Reynolds number and Prandtl number in pool boiling. This new correlation agrees with the experimental data from the augmented surface satisfactory. پرونده مقاله
      • دسترسی آزاد مقاله

        32 - Vibration Analysis of an Imperfect Single-Layer Graphene Sheet using Quasi-3d Theory and Isogeometric Approach
        Heidar Fazeli Armen Adamian Ahmad Hosseini-Sianaki
        In this study, the size-dependent free vibration analysis of a geometrically imperfect single-layer graphene sheet (SLGS) is studied by an isogeometric approach along with the quasi-3D shear and normal deformation theory. Initial geometric imperfections alter the natura چکیده کامل
        In this study, the size-dependent free vibration analysis of a geometrically imperfect single-layer graphene sheet (SLGS) is studied by an isogeometric approach along with the quasi-3D shear and normal deformation theory. Initial geometric imperfections alter the natural frequencies of the graphene sheets that may exist inherently or purposely created by researchers. The initial curvature is modelled by an analytical function in the governing Equations of the plate. A 4-variable quasi-3D theory with a seventh-order distribution function is used to include both shear deformation and thickness stretching influences. A weak form of a nonlocal plate for free vibration analysis is derived that requires the first-order continuity of the displacement fields. Inherent high-order continuity of non-uniform rational B-spline (NURBS) basis functions in isogeometric analysis can meet this condition. A comparison between the present study and other published works reveals the efficiency and accuracy of the proposed method in imperfect SLGS. The results of the present study show a significant effect of initial geometric imperfection on the natural frequency of single-layer graphene sheets. پرونده مقاله
      • دسترسی آزاد مقاله

        33 - اثربخشی آموزش هوش هیجانی بر مؤلفه‌های سازگاری اجتماعی دختران نوجوان تک‌والدی با مشکلات هیجانی و رفتاری
        فرزانه معتمدی احمد به پژوه محسن شکوهی یکتا غلامعلی افروز باقر غباری بناب
        هدف این پژوهش تعیین تأثیر آموزش هوش هیجانی بر ارتقای سازگاری اجتماعی دختران تک‌والدی با مشکلات هیجانی و رفتاری مقطع متوسطه اول شهر تهران بود. این پژوهش در زمرۀ طرح‌های شبه تجربی با طرح پیش‌آزمون، پس‌آزمون و پیگیری با گروه کنترل بود. جامعۀ آماری پژوهش تمامی نوجوانان دختر چکیده کامل
        هدف این پژوهش تعیین تأثیر آموزش هوش هیجانی بر ارتقای سازگاری اجتماعی دختران تک‌والدی با مشکلات هیجانی و رفتاری مقطع متوسطه اول شهر تهران بود. این پژوهش در زمرۀ طرح‌های شبه تجربی با طرح پیش‌آزمون، پس‌آزمون و پیگیری با گروه کنترل بود. جامعۀ آماری پژوهش تمامی نوجوانان دختر 13 تا 16 دارای مشکلات هیجانی و رفتاری شهر تهران سال تحصیلی 93-1392 که دارای خانواده‌های تک‌والدی بودند. گروه نمونه با گزینش هدفمند شامل 28 نفر از آن‌ها که با افت آزمودنی‌ها، 11 آزمودنی در گروه آزمایشی و 12 نفر در گروه کنترل شرکت داشتند. برنامۀ آموزشی در ده جلسۀ دو ساعته و به روش کارگاهی ارائه شد. در این پژوهشپرسشنامۀ نیازسنجی، فهرست بررسی رفتار کودک و فرم خودسنجی نوجوانان (Achenbach & Rascula, 2001) و زیرمقیاس سازگاری اجتماعی از پرسشنامۀ شخصیتی کالیفرنیا (Tiegs, Clark &Thrope, 1941) مورد استفاده قرار گرفت. تحلیل داده‌ها به روش تحلیل واریانس چندمتغیره با طرح اندازه‌گیری‌های مکرر نشان داد که بر اثر برنامۀ آموزش هوش هیجانی، سازگاری اجتماعی آزمودنی‌ها افزایش یافته و اثربخشی برنامه تا مرحلۀ پیگیری نیز پایدار بوده است (01/0> P). شرکت در این دورۀ آموزشی، به افزایش سازگاری اجتماعی نوجوانان تک‌والدی دارای مشکلات رفتاری و عاطفی منجر شده است؛ بنابراین آموزش مهارت‌های هوش هیجانی به‌عنوان مهارت‌های زیربنایی سلامت روان رویکردی تأثیرگذار در افزایش سازگاری اجتماعی نوجوانان است. پرونده مقاله
      • دسترسی آزاد مقاله

        34 - تأثیر روان‌درمانی مبتنی بر تحلیل عملکرد بر کیفیت زندگی و عزت‌نفس زنان روسپی: پژوهش مورد منفرد
        پروین میرعنایت محمدرضا عابدی راضیه ایزدی
        هدف از انجام این پژوهش تعیین تأثیر روان‌درمانی مبتنی بر تحلیل عملکرد (FAP) بر کیفیت زندگی و عزت‌نفس زنان روسپی بود. در این مطالعه از روش پژوهشی مورد منفرد A-B استفاده شد. پس از سه جلسه خط پایه، مداخله آغاز و ۱۶ جلسه ۴۵ دقیقه‌ای روان‌درمانی مبتنی بر تحلیل عملکرد دو بار د چکیده کامل
        هدف از انجام این پژوهش تعیین تأثیر روان‌درمانی مبتنی بر تحلیل عملکرد (FAP) بر کیفیت زندگی و عزت‌نفس زنان روسپی بود. در این مطالعه از روش پژوهشی مورد منفرد A-B استفاده شد. پس از سه جلسه خط پایه، مداخله آغاز و ۱۶ جلسه ۴۵ دقیقه‌ای روان‌درمانی مبتنی بر تحلیل عملکرد دو بار در هفته برای شرکت‌کنندگان اجرا شد. دو هفته پس از مداخله، آزمودنی‌ها در دو جلسه به فاصله ۱۵ روز تحت آزمون پیگیری قرار گرفتند. جامعه آماری این پژوهش را کلیه زنان روسپی شهر اصفهان در سال ۹۵ -۱۳۹۴ تشکیل می‌دهند که از میان آنها دو نفر شامل یک زن ۲۷ ساله مطلقه و یک زن ۲۷ ساله متأهل به‌عنوان نمونه با روش هدفمند انتخاب شدند. برای جمع‌آوری اطلاعات از پرسشنامه کیفیت زندگی ۳۶SF- (ویر و شربون، ۱۹۹۲) و پرسشنامه عزت‌نفس کوپر اسمیت (کوپر اسمیت، ۱۹۶۷) استفاده شد. یافته‌های این پژوهش بر اساس تحلیل دیداری و شاخص‌های آمار توصیفی مورد تجزیه‌وتحلیل قرار گرفت و نتایج بر اساس بررسی میانه، میانگین، روند و PND نشان داد که مداخله مورد نظر بر افزایش کیفیت زندگی هر دو آزمودنی و افزایش عزت‌نفس آزمودنی دوم مؤثر بوده است. با توجه به پایین بودن کیفیت زندگی و عزت‌نفس زنان روسپی می‌توان از روان‌درمانی مبتنی بر تحلیل عملکرد به‌منظور افزایش کیفیت زندگی و عزت‌نفس این افراد بهره گرفت. پرونده مقاله
      • دسترسی آزاد مقاله

        35 - A New Coplanar Full Adder/Subtractor in Quantum-Dot Cellular Automata Technology
        Mohsen Vahabi Amir Sabbagh Molahosseini
        The conventional CMOS technology faces different challenges such as fabrication in nanoscale which motivates researchers to find new alternatives to it for future high-performance systems. The quantum-dot cellular automata (QCA) is one of efficient nano-electronics tech چکیده کامل
        The conventional CMOS technology faces different challenges such as fabrication in nanoscale which motivates researchers to find new alternatives to it for future high-performance systems. The quantum-dot cellular automata (QCA) is one of efficient nano-electronics technologies which can provide simple and efficient implementation of digital circuits in nanoscale. Due to the importance of addition in digital processors and embedded systems, there many QCA designs of adders and subtractors during the previous years. However, recently the unified design of adder and subtractor circuits has been considered to achieve overall area and delay reduction for digital computational circuits. In this paper, we present new coplanar design of a unified adder/subtractor unit with the QCA technology. Besides, the proposed single-layer design approach has been used to design separate half adder, half subtractor, half adder and full adder circuits. The comparison of circuit’s parameters of the proposed designs than previous works show the significant improvement in term of area, delay and cell number. پرونده مقاله
      • دسترسی آزاد مقاله

        36 - تلفیق آینده‌نگری جمعیت در ارائه سامانه پشتیبان تصمیم‌گیری مکان‌یابی دفن پسماند شهری (مطالعه موردی: استان قزوین)
        زهرا اسدالهی نغمه مبرقعی دینان مصطفی کشتکار
        پیشینه و هدف گسترش شهرنشینی با افزایش جمعیت تولید پسماندهای جامد شهری را طی سال‌های اخیر به‌طور قابل‌ملاحظه‌ای سرعت بخشیده است. علیرغم اهمیت دفن مواد زائد جامد به‌عنوان یکی از مهم‌ترین بخش‌های چرخه مدیریت پسماند، در حال حاضر دفن اصولی در بسیاری از مناطق ایران مورد غفلت چکیده کامل
        پیشینه و هدف گسترش شهرنشینی با افزایش جمعیت تولید پسماندهای جامد شهری را طی سال‌های اخیر به‌طور قابل‌ملاحظه‌ای سرعت بخشیده است. علیرغم اهمیت دفن مواد زائد جامد به‌عنوان یکی از مهم‌ترین بخش‌های چرخه مدیریت پسماند، در حال حاضر دفن اصولی در بسیاری از مناطق ایران مورد غفلت قرارگرفته است. اخیراً سیستم اطلاعات جغرافیایی (GIS) به‌عنوان ابزاری مناسب برای استفاده در مطالعات انتخاب محل دفن پسماند شناخته‌شده است. علاوه بر این، تصمیم‌گیری چند معیاره روشی شناخته‌شده برای حل مشکلات پیچیده تصمیم‌گیری در انتخاب محل دفن پسماند است که یکی از روش‌های شناخته‌شده آن فرآیند تحلیل سلسله مراتبی است. ازیک‌طرف انتخاب محل دفن پسماند مبتنی بر GIS شامل مراحل اصلی غربالگری و حذف مناطق نامناسب و رتبه‌بندی مناطق باقیمانده است. از طرف دیگر برنامه‌ریزی مکان‌یابی دفن پسماند درگرو داشتن اطلاعات کافی از ویژگی‌های جمعیتی دارد و با توجه به روند افزایشی رشد جمعیت، لزوم توجه به پیش‌بینی جمعیت در تصمیم‌گیری‌ها دوچندان می‌شود. استان قزوین در حوزه مرکزی ایران در سال ۱۳۷۵ از استان تهران جدا شد. براساس سرشماری آبان 1395 جمعیت استان قزوین، 1273761 نفر بود که در مقایسه با آبان 1390 متوسط رشد سالانه جمعیت آن معادل 17/1 درصد بوده است. با توجه به تازه تأسیس بودن استان قزوین و افزایش جمعیت آن طی دهه گذشته، ضرورت مکان‌یابی محل مناسب دفن پسماند با پیش‌بینی رشد جمعیت احساس می‌شود. لذا پژوهش حاضر باهدف واردسازی کمترین آسیب به محیط‌زیست ﺑﺎ به‌کارگیری رویکرد یکپارچه فرآیند تحلیل سلسله مراتبی- سیستم اطلاعات جغرافیایی GIS-AHP در تلفیق با آینده‌نگری جمعیت به مکان‌یابی دﻓﻦ پسماندﻫﺎی ﺷﻬﺮی در استان قزوین پرداخته است.مواد و روش هاپژوهش حاضر طی سه‌گام اصلی مکان‌یابی اولیه دفن پسماند با روش ارزیابی چند معیاره MCE، تعیین مساحت موردنیاز دفن پسماند براساس آینده‌نگری جمعیت تا افق 1425 و درنهایت مکان‌یابی نهایی دفن پسماند شهری با مدل تصمیم‌گیری مکانی تخصیص تک هدفه زمین در نرم‌افزار ایدریسی TerrSet انجام شد. در گام نخست، مکان‌یابی اولیه دفن پسماند براساس رویکرد یکپارچه GIS-AHP طی مراحل شناسایی و انتخاب معیارها، وزن‌دهی معیارها، استانداردسازی معیارها و درنهایت ادغام معیارها با روش WLC انجام شد. در گام دوم، مساحت موردنیاز برای احداث مکان ‌دفن پسماند شهری، بر اساس پیش‌بینی رشد جمعیت، سرانه تولید زباله (کیلوگرم در روز) و متوسط عمق آب زیرزمینی برآورد شد. به‌منظور محاسبه جمعیت استان قزوین تا سال 1425، نتایج گزارش‌های مرکز پژوهش‌های توسعه و آینده‌نگری سازمان برنامه‌وبودجه استفاده شد که در این گزارش‌های پیش‌بینی جمعیت استان قزوین تا افق 1425 با توجه به عوامل مؤثر شامل نرخ باروری، مرگ‌ومیر، مهاجرت و ترکیب سنی و جنسی جمعیت حاصل‌شده است. در گام سوم، مکان‌یابی نهایی دفن پسماند شهری با مدل تصمیم‌گیری مکانی تخصیص یک هدفه زمین در نرم‌افزار ایدریسی TerrSetانجام شد. نقشه توان‌سنجی اولیه حاصل از روش MCE به‌عنوان ورودی پایه وارد مدل شد. همچنین شرط مساحت موردنیاز برآورد شده در گام دوم براساس آینده‌نگری جمعیت اعمال شد. در این پژوهش دو سناریو اجرا شد. در سناریوی اول در انتخاب مکان‌های نهایی دفن پسماند، شرط دارا بودن بیشترین ارزش نقشه‌ای اعمال شد و در سناریوی دوم علاوه بر شرط ذکرشده، لزوم وجود بافر 10 کیلومتری برای هر یک از گزینه‌های انتخابی لحاظ گردید.نتایج و بحثدر پژوهش حاضر تعداد 7 معیار اصلی اکولوژیک و انسانی و 25 معیار فرعی جهت مکان‌ یابی دفن مواد زائد جامد شهری در استان قزوین انتخاب شد. با دخالت دادن نتایج پرسشنامه‌ های مقایسه زوجی، وزن نهایی هر معیار و زیرمعیار مشخص شد. پس از آماده سازی لایه های GIS و تشکیل پایگاه داده، هریک از لایه های فاکتور به تناسب توابع موجود در ابزار عضویت فازی استانداردسازی شده و با طیف هایی از اعداد بین صفر تا 255 که بیانگر درجه عضویت در مجموعه فازی است، طبقه بندی شدند. این تحقیق تکنیک AHP را در محیط GIS برای بررسی بهترین مکان‌های دفن زباله در مقیاس استان قزوین اجرا نمود. سیستم اطلاعات جغرافیاییGIS ابزاری بسیار قدرتمند است که می‌تواند ارزیابی سریع از منطقه موردمطالعه برای تعیین محل مناسب دفن زباله ارائه دهد. همچنین تکنیکAHP برای حل آن‌دسته از مشکلات پیچیده‌ای که ممکن است میان اهداف متعدد مسئله همبستگی وجود داشته باشد، مفید است. انتخاب معیارها یکی از مهم‌ترین گام‌ها در این تحقیق بود. در انتخاب سایت دفن پسماند باید عوامل محیطی را در کنار عوامل اقتصادی در نظر گرفت. بنابراین، هشت معیار اصلی فاصله از جاده، ارتفاع، شیب، جهت فاصله از مناطق مسکونی، فاصله از آب‌های سطحی، فاصله از مناطق حفاظت‌شده، زمین‌شناسی، هیدرولوژی و کاربری اراضی را در پژوهش خود بکار گرفتند. در این تحقیق نیز سعی شد در کنار معیارهای یادشده، پارامترهای مختلف طبیعی و انسانی مانند فاصله از خطوط انتقال انرژی، فاصله از شهرک‌های صنعتی و راه‌آهن و غیره نیز بکار گرفته شود تا جامعیت تحقیق حاضر دوچندان گردد. نقشه توان‌سنجی اولیه کاربری دفن پسماند حاصل از روش MCE با توجه به نمودار فراوانی ارزش‌های آن با روش شکست طبیعی (Natural Break) طبقه‌بندی شد. شهرستان‌های تاکستان، آبیک و بویین‌زهرا به ترتیب مساحت‌های 50.15، 14.55 و 54.48 کیلومترمربع از توان خوب جهت دفن پسماند در سطح استان قزوین برخوردار بودند. مناطق ﻳﺎدﺷﺪه ﺑﻪ ﻟﺤﺎظ ﻓﺎﺻﻠﻪ از ﻣﺮاﻛﺰ ﺛﻘﻞ ﺟﻤﻌﻴﺘﻲ ﻧﻴﺰ در ﺑﻬﺘﺮﻳﻦ ﺷﺮاﻳﻂ ﻗﺮار داشتند. مکان یابی نهایی در دو سناریو با مدل تصمیم‌گیری مکانی SOLA اجرا شد. درنهایت سایت شماره یک از سناریو اول و دوم در شرق استان قزوین و در محدوده شهرستان بوئین‌زهرا و در نزدیکی روستای اله آباد و سایت شماره سه از سناریو دوم در فاصله 15 کیلومتری از مدیریت دفن پسماند در مرکز استان و سمت شرق روستای زین آباد به‌عنوان اولویت معرفی شدند.نتیجه گیری لازم به ذکر است در کنار عدم تعیین محل مناسب برای دفع نهایی پسماندها در سالیان گذشته، تاکنون برنامه جامعی در زمینه کاهش تولید پسماند و اجرای طرح‌های تفکیک از مبدأ در هیچ‌یک از شهرستان‌های موردمطالعه تهیه و اجرانشده است. شکل‌گیری بخش آینده‌پژوهی در ساختار تشکیلاتی سیستم‌های مدیریتی دفن پسماند نه تنها می‌تواند منجربه کاهش خطرات محیط‌زیستی شود بلکه پایداری در منابع اقتصادی و اجتماعی را به‌همراه خواهد داشت. پرونده مقاله
      • دسترسی آزاد مقاله

        37 - ایجاد رابط کاربر‌گرافیکی جهت محاسبه خودکار دمای‌سطح زمین و استفاده از نتایج در ارزیابی تغییرات دمایی کاربری‌های اراضی شهرستان اردبیل
        حسین فکرت صیاد اصغری سراسکانرود سید کاظم علوی پناه
        پیشینه و هدف دمای سطح زمین (LST) یک شاخص حیاتی برای مطالعه تغییرات محیطی، شرایط هیدرولوژیکی و بیلان انرژی زمین محسوب می‌شود که با استفاده از آن می‌توان روی تغییرات حرارتی شهرها نیز نظارت کرد. کمبود ایستگاه‌های هواشناسی در اکثر مناطق کشور از جمله منطقه مورد مطالعه محدودی چکیده کامل
        پیشینه و هدف دمای سطح زمین (LST) یک شاخص حیاتی برای مطالعه تغییرات محیطی، شرایط هیدرولوژیکی و بیلان انرژی زمین محسوب می‌شود که با استفاده از آن می‌توان روی تغییرات حرارتی شهرها نیز نظارت کرد. کمبود ایستگاه‌های هواشناسی در اکثر مناطق کشور از جمله منطقه مورد مطالعه محدودیت های اطلاعاتی در زمینه داده های دمای سطح زمین ایجاد کرده است. همچنین طیف وسیعی از کاربران غیر سنجش از دوری وجود دارند که به نقشه‌های دمای سطح زمین نیاز دارند و اغلب آنها آشنایی کافی با نرم‌افزارهای محاسبه کنندۀ LST ندارند و به ناچار مجبورند زمان زیادی را صرف کنند تا نقشه‌های مورد نظر خود را تهیه کنند. این فرآیند حتی برای متخصصان سنجش از دور نیز در صورت بالا بودن تعداد تصاویر، زمان‌بر خواهد بود.استفاده از داده های معتبر جهت اعتبارسنجی که از لحاظ زمانی کمترین اخلاف را با زمان عبور ماهواره داشته باشد، اهمیت زیادی در برآورد دقت نتایج دارد. با بررسی تحقیقات داخلی مشابه با موضوع مورد مطالعه اکثر پژوهش‌های داخلی برای اعتبارسنجی نتایج تنها از داده‌های ایستگاه هواشناسی استفاده کردند که زمان ثبت داده در این ایستگاه‌ها با زمان عبور ماهواره متفاوت است. در این پژوهش به دلیل وسعت زیاد منطقه مورد مطالعه و کافی نبودن تعداد ایستگاه‌های هواشناسی، علاوه بر داده های دمای سطح اندازه گیری شده در ایستگاه‌های سینوپتیک، دمای سطح زمین در دو ایستگاه زمینی نیز همزمان با عبور ماهواره ثبت گردید. ایجاد رابط کاربر گرافیکی (GUI) جهت محاسبه خودکار دمای سطح شهرستان اردبیل با دو الگوریتم تک‌کانال و RTE و از نتایج در ارزیابی تغییرات دمایی کاربری‌های اراضی منطقه استفاده شد.مواد و روش‌ ها جهت محاسبه خودکار دمای سطح زمین شهرستان اردبیل از سه نوع داده تصاویر ماهواره‌های لندست 5 و 8، داده‌های دمای سطح ثبت شده در محل دو ایستگاه هواشناسی موجود در محدوده مورد مطالعه و همچنین به‌دلیل کافی نبودن تعداد ایستگاه های هواشناسی از داده های دمای سطح اندازه گیری شده با دماسنج های دیجیتالی همزمان با عبور ماهواره نیز استفاده شد. پس از آماده‌سازی تصاویر حرارتی و چند طیفی، ابتدا جهت مدل‌سازی میزان انتقال پذیری اتمسفر از از نرم افزار محاسبه گر تحت‌وب MODTRAN استفاده و ضرایب اتمسفری استخراج گردید. سپس برای ایجاد رابط ه ای کاربر گرافیکی و محاسبه خودکار LST، دمای سطح زمین با دو الگوریتم تک کانال و روش RTE با تصاویر ماهواره لندست 5 و لندست 8 برای دو تاریخ 31/07/2000 و 21/08/2019 در محیط نرم‌افزار متلب کد نویسی شد و با استفاده از این کدها رابط ه ای کاربر گرافیکی برای هر الگوریتم ایجاد و در نهایت اپلیکیشن محاسبه گر خودکار دمای سطح زمین تولید گردید. همچنین نقشه کاربری اراضی شهرستان اردبیل برای هر دو تاریخ مذکور با استفاده از الگوریتم جنگل تصادفی در محیط سامانه گوگل ارث انجین با 7 کلاس طبقه بندی و استخراج گردید. این الگوریتم به دلیل ساختار سلسله مراتبی که در انتخاب هر پیکسل به طبقه مناسب دارد در مقایسه با روش های سنتی مثل حداکثر احتمال عملکرد بسیار بهتری دارد. جهت اعتبار سنجی نقشه های دمای سطح از دو نوع داده دمای سطح ثبت شده در دو ایستگاه هواشناسی و دمای سطح ثبت شده توسط دماسنج دیجیتالی که همزمان با عبور ماهواره در دو نقطه از محیط همگن غیرشهری با کاربری کشاورزی و بایر که محصول آن برداشت شده بود، استفاده شد. برای ارزیابی دقت نقشه های کاربری اراضی نیز با استفاده از Google Earth که توان تفکیک مکانی بهتری نسبت به تصویر مورد استفاده دارد، 248 نقطه کنترل زمینی از پیکسل های خالص کاربری های مختلف اخذ گردید و در فرآیند اعتبارسنجی بکار گرفته شد. همچنین پارامترهای آماری مانند ماتریس خطا، دقت کلی و ضریب کاپا روی خروجی هر دو نقشه کاربری اراضی اعمال شد.نتایج و بحث با استفاده از کدهای نوشته شده در محیط نرم افزار متلب رابط ه ای کاربر گرافیکی (GUI) ایجاد و سپس اپلیکیشن محاسبه گر خودکار دمای سطح زمین تولید گردید. خروجی اپلیکیشن نقشه های دمای سطح زمین با الگوریتم های تک کانال و معادله انتقال تابشی (RTE) بود که برای تاریخ 2000/07/31 با استفاده از تصویر حرارتی (باند 6) سنجنده TM ماهواره لندست 5 و تاریخ 2019/08/21 بوسیله باند 10 سنجنده TIRS ماهواره لندست 8 ایجاد گردید. پس از مقایسه نقشه های خروجی با داده های ایستگاه هواشناسی و ایستگاه زمینی، نتایج نشان داد که روش تک کانال در هر دو سال نسبت به ایستگاه ها کمترین اخلاف دما را داشته است. پس از تهیه نقشه های دمای سطح و انتخاب الگوریتم بهینه (تک کانال) نقشه های کاربری اراضی شهرستان اردبیل با استفاده از الگوریتم جنگل تصادفی در محیط GEE تهیه گردید. ارزیابی های آماری نتایج طبقه بندی نشان داد که برای سال 2000 بیشترین تداخل پیکسلی مربوط به کلاس مرتع متوسط و فقیر بوده است که با کلاس های مسکونی و کشاورزی دیم جابه جایی 16 پیکسلی دارد. با توجه به بهبود توان تفکیک مکانی ماهواره لندست 8 نسبت به لندست 5 و به دنبال آن تفکیک بهتر کلاس ها، این جابه‌جایی پیکسلی در نقشه کاربری سال 2019 مقدار کمتری را نشان می‌دهد. به گونه ای که بیشترین خطا مربوط به کلاس کشاورزی آبی بوده که جابه جایی 10 پیکسلی با کلاس‌های مرتع غنی و کشاورزی دیم داشته است. در نهایت با استفاده از نقشه دمای سطح و نقشه کاربری اراضی، تغییرات دمایی کاربری ها در بازه زمانی 19 ساله مورد ارزیابی قرار گرفت. با واردسازی تصاویر ورودی و پارامترهای اتمسفری در اپلیکیشن دمای سطح زمین را با دو الگوریتم تک‌کانال و روش RTE محاسبه گردید. ارزیابی نقشه‌های خروجی با داده‌های هواشناسی و زمینی نشان داد که الگوریتم تک‌کانال با اختلاف 2.5+ و 2- با ایستگاه‌های 1 و 2 برای سال 2000 و با اختلاف دمای 1.3+، 0.9+، 1- و 0.9- به ترتیب با ایستگاه‌های 1، 2، 3 و 4 در سال 2019 دقت بالاتر نسبت به روش RTE داشته است. همچنین نتایج اعتبارسنجی نقشه‌های کاربری اراضی نیز نشان از دقت کلی 95/0 و ضریب کاپای 94/0 براس سال 2000 و دقت کلی 0.96 و ضریب کاپای 0.95 برای سال 2019 داشته است. ارزیابی روابط بین دمای سطح و نقشه‌های کاربری اراضی نشان داد که برخلاف رشد فیزیکی قابل توجه بخش شهری در بازه زمانی 19 ساله، بجز کاربری مناطق مسکونی، همه کاربری‌ها در سال 2019 نسبت به سال 2000 با افزایش دمای متوسط سطح روبه‌رو بوده‌اند.نتیجه‌گیری نتایج تحقیق نشان داد که عواملی مانند گسترش زمین ه ای کشاورزی با کشت آبی اطراف بخش شهری تا شعاع 10 کیلومتری و درهم تنیدگی این مزارع با بخش شهری، تاثیر زیادی در تعدیل دمای بخش شهری محدوده شده است. این اراضی در سال 2000 عمدتاً زیر کشت محصولات دیمی بودند و با حل مشکل آب (حفر چاه های عمیق و پروژه های انتقال آب) تبدیل به باغات و مزارع کشت آبی مثل سیب زمینی شدند. این محصولات به دلیل نیاز آبی بالا دارای سبزینگی بالایی نیز هستند و این عامل خود باعث بالا رفتن میزان تبخیر و تعرق و به دنبال آن خنکی محدوده کشت و بخش شهری شده است. از بین سایر کلاس ها نیز در هر دو سال کاربری آب کمترین و کاربری اراضی بایر بیشترین مقدار متوسط دمای سطح را داشته است. اپلیکیشن تولید شده امکان اجرا روی هر سیستم عاملی که از فرمت exe پشتیبانی می کند را دارد و کاربر می تواند با تعیین پارامترهای اتمسفری دمای سطح زمین را به صورت خودکار برآورد کند. همچنین این برنامه کاربردی قابلیت به کارگیری در بخش های مختلف مانند سامانه های کشاورزی، اقلیمی و مدیریت منابع آب را نیز دارد. پرونده مقاله
      • دسترسی آزاد مقاله

        38 - ارائه یک مبدل تک سوئیچ DC-DC بسیار افزاینده با کلیدزنی نرم برای کاربردهای فتوولتائیک
        طیبه شمسی مجید دلشاد احسان ادیب محمد روح اله  یزدانی
        یک مبدل بسیار افزاینده DC-DC تک سوئیچه در این مقاله ارائه می‌گردد. شرایط کلید‌زنی نرم در مبدل پیشنهادی برای زمان روشن شدن و خاموش شدن سوئیچ وجود دارد که باعث افزایش راندمان می‌شود. به منظور افزایش بهره از دو سلف کوپل شده استفاده شده است که از سلف نشتی سلف کوپل شده به من چکیده کامل
        یک مبدل بسیار افزاینده DC-DC تک سوئیچه در این مقاله ارائه می‌گردد. شرایط کلید‌زنی نرم در مبدل پیشنهادی برای زمان روشن شدن و خاموش شدن سوئیچ وجود دارد که باعث افزایش راندمان می‌شود. به منظور افزایش بهره از دو سلف کوپل شده استفاده شده است که از سلف نشتی سلف کوپل شده به منظور ایجاد شرایط کلید‌زنی نرم استفاده شده است، به طوریکه که حداقل المان کمکی در مبدل پیشنهادی به کار گرفته شده است. در مبدل پیشنهادی تنها یک سوئیچ استفاده شده است که شرایط مبدل از نظر مدار کنترل هیچ تفاوتی با یک مبدل پایه ندارد. از این رو مبدل نیاز به طراحی مدار کنترل جدید ندارد. مدار کمکی اضافه شده به مبدل با حداقل المان، شرایط کلید زنی نرم را برای سوئیچ در زمان روشن شدن، تحت جریان صفر و در زمان خاموش شدن، تحت ولتاژ صفر ایجاد می‌کند، که علاوه بر افزایش راندمان، سادگی عملکرد و عدم افزایش هزینه را در پی دارد. بنابراین نوآوری مقاله ارایه یک مبدل بسیار افزاینده سوییچینگ نرم بدون تحمیل سوییچ اضافه و با تعداد المان پایین است. مبدل پیشنهادی پس از تحلیل تئوری کامل در توان 400 وات شبیه سازی می‌شود، که نتایج حاصل علاوه بر اثبات تحلیل تئوری راندمان 2/97 را نشان می‌دهد. همچنین نمونه آزمایشگاهی ساخته شده از مبدل و نتایج عملی بدست آمده، تحلیلهای تئوری و نتایج شبیه سازی را اثبات می‌نماید. پرونده مقاله
      • دسترسی آزاد مقاله

        39 - Natural Frequency of Rotating Single-Walled Carbon Nanotubes with Considering Gyroscopic Effect
        A Fatahi-Vajari Z Azimzadeh
        This paper investigates the bending vibration of rotating single-walled carbon nanotubes (SWCNTs) based on nonlocal theory. To this end, the rotating SWCNTs system modeled as a beam with a circular cross section and the Euler-Bernoulli beam theory (EBT) is applied with چکیده کامل
        This paper investigates the bending vibration of rotating single-walled carbon nanotubes (SWCNTs) based on nonlocal theory. To this end, the rotating SWCNTs system modeled as a beam with a circular cross section and the Euler-Bernoulli beam theory (EBT) is applied with added effects such as rotary inertia, gyroscopic effect and rotor mass unbalance. Using nonlocal theory, two coupled sixth order partial differential equations that govern the vibration of rotating SWCNTs are derived. To obtain the natural frequency and dynamic response of the nanorotor system, the equation of motion for the rotating SWCNTs are solved. It is found that there are two frequencies in the frequency spectrum. The positive rootintroduced as forward whirling mode, while the negative root represents backward whirling mode. The detailed mathematical derivations are presented while the emphasis is placed on investigating the effect of the several parameters such as, tube radius, angular velocity and small scale parameter on the vibration behavior of rotating nanotubes. It is explicitly shown that the vibration of a spinning nanotube is significantly influenced by these effects. To validate the accuracy and efficiency of this work, the results obtained herein are compared with the existing theoretical and experimental results and good agreement is observed. To the knowledge of authors, the vibration of rotating SWCNTs considering gyroscopic effect has not investigated analytically yet and then the results generated herein can be served as a benchmark for future works. پرونده مقاله
      • دسترسی آزاد مقاله

        40 - The Effects of Forming Parameters on the Single Point Incremental Forming of 1050 Aluminum Alloy Sheet
        R Safdarian
        The single point incremental forming (SPIF) is one of the dieless forming processes which is widely used in the sheet metal forming. The correct selection of the SPIF parameters influences the formability and quality of the product. In the present study, the Gurson-Tver چکیده کامل
        The single point incremental forming (SPIF) is one of the dieless forming processes which is widely used in the sheet metal forming. The correct selection of the SPIF parameters influences the formability and quality of the product. In the present study, the Gurson-Tvergaard Needleman (GTN) damage model was used for the fracture prediction in the numerical simulation of the SPIF process of aluminum alloy 1050. The GTN parameters of AA 1050 sheet were firstly identified by the numerical simulation of tensile test and comparison of the experimental and numerical stress-strain curves. The identified parameters of the GTN damage model were used for fracture prediction in the SPIF process. The numerical results of the fracture position, thickness variation across the sample and forming height were compared with the experimental results. The numerical results had good agreement with the experimental ones. The effect of SPIF main parameters was investigated on the formability of samples by the verified numerical model. These parameters were tool rotation speed, tool feed rate, tool diameter, wall angle of the sample, vertical pitch, and friction between the tool and the blank. پرونده مقاله
      • دسترسی آزاد مقاله

        41 - Coupled Axial-Radial Vibration of Single-Walled Carbon Nanotubes Via Doublet Mechanics
        Z Azimzadeh A Fatahi-Vajari
        This paper investigates the coupled axial-radial (CAR) vibration of single-walled carbon nanotubes (SWCNTs) based on doublet mechanics (DM) with a scale parameter. Two coupled forth order partial differential equations that govern the CAR vibration of SWCNTs are derived چکیده کامل
        This paper investigates the coupled axial-radial (CAR) vibration of single-walled carbon nanotubes (SWCNTs) based on doublet mechanics (DM) with a scale parameter. Two coupled forth order partial differential equations that govern the CAR vibration of SWCNTs are derived. It is the first time that DM is used to model the CAR vibration of SWCNTs. To obtain the natural frequency and dynamic response of the CAR vibration, the equations of motion are solved and the relation between natural frequencies and scale parameter is derived. It is found that there are two frequencies in the frequency spectrum and these CAR vibrational frequencies are complicated due to coupling between two vibration modes. The advantage of these analytical formulas is that they are explicitly dependent to scale parameter and chirality effect. The influence of changing some geometrical and mechanical parameters of SWCNT on its CAR frequencies has been investigated, too. It is shown that the chirality and scale parameter play significant role in the CAR vibration response of SWCNTs. The scale parameter decreases the higher band CAR frequency compared to the predictions of the classical continuum models. However, with increase in tube radius and length, the effect of the scale parameter on the natural frequencies decreases. The lower band CAR frequency is nearly independent to scale effect and tube diameter. The CAR frequencies of SWCNTs decrease as the length of the tube increases. This decreasing is higher for higher band CAR frequency. To show the accuracy and ability of this method, the results obtained herein are compared with the existing theoretical and experimental results and good agreement is observed. پرونده مقاله
      • دسترسی آزاد مقاله

        42 - Analysis of Coupled Nonlinear Radial-Axial Vibration of Single-Walled Carbon Nanotubes Using Numerical Methods
        A Fatahi-Vajari Z Azimzadeh
        This paper investigates the nonlinear coupled radial-axial vibration of single-walled carbon nanotubes (SWCNTs) based on numerical methods. Two coupled partial differential equations that govern the nonlinear coupled radial-axial vibration for such nanotube are derived چکیده کامل
        This paper investigates the nonlinear coupled radial-axial vibration of single-walled carbon nanotubes (SWCNTs) based on numerical methods. Two coupled partial differential equations that govern the nonlinear coupled radial-axial vibration for such nanotube are derived using nonlocal doublet mechanics (DM) theory. To obtain the nonlinear natural frequencies in coupled radial-axial vibration mode, these equations are solved using Homotopy perturbation method (HPM). It is found that the coupled radial-axial vibrational frequencies are complicated due to coupling between two vibration modes. The influences of some commonly used boundary conditions, changes in vibration modes and variations of the nanotubes geometrical parameters on the nonlinear coupled radial-axial vibration characteristics of SWCNTs are discussed. It was shown that boundary conditions and maximum vibration velocity play significant roles in the nonlinear coupled radial-axial vibration response of SWCNTs. It was shown that unlike the linear one, the nonlinear natural frequencies are dependent to maximum vibration velocity. Increasing the maximum vibration velocity increases the natural frequency of vibration compared to the prediction of the linear model. However, with increase in tube length, the effect of the maximum vibration velocity on the natural frequencies decreases. It was also shown that the amount and variation of nonlinear natural frequencies are more apparent in higher vibration modes and two clamped boundary conditions. To show the accuracy and capability of this method, the results obtained herein are compared with the fourth order Runge-Kuta numerical results and also with the other available results and good agreement is observed. It is notable that the results generated herein are new and can be served as a benchmark for future works. پرونده مقاله
      • دسترسی آزاد مقاله

        43 - Dynamic and Quasi-Static Plastic Behavior of Single and Nested Thin-Walled Square Tubes Under Lateral Loading
        B Shabani S Gohari Rad A Alijani R Rajabiehfard
        This paper investigates the dynamic and quasi-static plastic behavior of single and nested mild steel square tubes under lateral loadings experimentally and numerically. The dynamic experimental tests are carried out using a gas gun and the dynamic force-time responses چکیده کامل
        This paper investigates the dynamic and quasi-static plastic behavior of single and nested mild steel square tubes under lateral loadings experimentally and numerically. The dynamic experimental tests are carried out using a gas gun and the dynamic force-time responses are measured with a load cell. Also, the quasi-static experimental tests are performed in a universal test machine. The dynamic experimental tests are also simulated with the finite element software Abaqus. Furthermore, the square tubes’ combinations in the nested systems are investigated in the present work. It is revealed that the amount of peak load decreases significantly when the form of the single tube changes from square to lozenge. It is also observed that in the nested tube structures, by changing each of the outer or inner tubes or both of them from the square form to lozenge one, the amount of peak load decreases meanwhile the energy absorption capacity decreases too, which is not desirable for energy absorbers. By comparing the impact results of both the single and nested square tubes which have the same mass, it can result that the nested square tubes behave better as energy absorbers compared with the single tubes. پرونده مقاله
      • دسترسی آزاد مقاله

        44 - Exact 3-D Solution for Free Bending Vibration of Thick FG Plates and Homogeneous Plate Coated by a Single FG Layer on Elastic Foundations
        H Salehipour R Hosseini K Firoozbakhsh
        This paper presents new exact 3-D (three-dimensional) elasticity closed-form solutions for out-of-plane free vibration of thick rectangular single layered FG (functionally graded) plates and thick rectangular homogeneous plate coated by a functionally graded layer with چکیده کامل
        This paper presents new exact 3-D (three-dimensional) elasticity closed-form solutions for out-of-plane free vibration of thick rectangular single layered FG (functionally graded) plates and thick rectangular homogeneous plate coated by a functionally graded layer with simply supported boundary conditions. It is assumed that the plate is on a Winkler-Pasternak elastic foundation and elasticity modulus and mass density of the FG layer vary exponentially through the thickness of the FG layer, whereas Poisson’s ratio is constant. In order to solve the equations of motion, a proposed displacement field is used for each layer. Influences of stiffness of the foundation, inhomogeneity of the FG layer and coating thickness-to-total thickness ratio on the natural frequencies of the plates are discussed. Numerical results presented in this paper can serve as benchmarks for future vibration analyses of single layered FG plates and coated plates on elastic foundations. پرونده مقاله
      • دسترسی آزاد مقاله

        45 - Levy Type Solution for Nonlocal Thermo-Mechanical Vibration of Orthotropic Mono-Layer Graphene Sheet Embedded in an Elastic Medium
        M Mohammadi A Farajpour M Goodarzi R Heydarshenas
        In this paper, the effect of the temperature change on the vibration frequency of mono-layer graphene sheet embedded in an elastic medium is studied. Using the nonlocal elasticity theory, the governing equations are derived for single-layered graphene sheets. Using Levy چکیده کامل
        In this paper, the effect of the temperature change on the vibration frequency of mono-layer graphene sheet embedded in an elastic medium is studied. Using the nonlocal elasticity theory, the governing equations are derived for single-layered graphene sheets. Using Levy and Navier solutions, analytical frequency equations for single-layered graphene sheets are obtained. Using Levy solution, the frequency equation and mode shapes orthotropic rectangular nanoplate are considered for three cases of boundary conditions. The obtained results are subsequently compared with valid result reported in the literature. The effects of the small scale, temperature change, different boundary conditions, Winkler and Pasternak foundations, material properties and aspect ratios on natural frequencies are investigated. It has been shown that the non-dimensional frequency decreases with increasing temperature change. It is seen from the figure that the influence of nonlocal effect increases with decreasing of the length of nanoplate and also all results at higher length converge to the local frequency. The present analysis results can be used for the design of the next generation of nanodevices that make use of the thermal vibration proper ties of the nanoplates. پرونده مقاله
      • دسترسی آزاد مقاله

        46 - A Modified Couple Stress Theory for Postbuckling Analysis of Timoshenko and Reddy-Levinson Single-Walled Carbon Nanobeams
        M Akbarzadeh Khorshidi M Shariati
        The novelty of this study is presentation of an exact solution for prediction of postbuckling behavior of shear deformable micro- and nano-scale beams based on modified couple stress theory and using principle of minimum potential energy. Timoshenko and Reddy-Levinson b چکیده کامل
        The novelty of this study is presentation of an exact solution for prediction of postbuckling behavior of shear deformable micro- and nano-scale beams based on modified couple stress theory and using principle of minimum potential energy. Timoshenko and Reddy-Levinson beam theories are applied to consider the shear deformation effect and Von Karman nonlinear kinematics is used to describe the nonlinear behavior of the postbuckling, and the Poisson's effect is also considered in stress-strain relation. Also, the size effect is exposed by introducing a material length scale parameter. Finally, the influences of shear deformation, Poisson's ratio and variations of length and thickness are investigated. The results indicate that the classical theory exaggerates the postbuckling amplitude of the nanobeam and overstates the effect of shear deformation on the postbuckling response of the nanobeam. پرونده مقاله
      • دسترسی آزاد مقاله

        47 - Lateral Vibrations of Single-Layered Graphene Sheets Using Doublet Mechanics
        A Fatahi-Vajari A. Imam
        This paper investigates the lateral vibration of single-layered graphene sheets based on a new theory called doublet mechanics with a length scale parameter. After a brief reviewing of doublet mechanics fundamentals, a sixth order partial differential equation that gove چکیده کامل
        This paper investigates the lateral vibration of single-layered graphene sheets based on a new theory called doublet mechanics with a length scale parameter. After a brief reviewing of doublet mechanics fundamentals, a sixth order partial differential equation that governs the lateral vibration of single-layered graphene sheets is derived. Using doublet mechanics, the relation between natural frequency and length scale parameter is obtained in the lateral mode of vibration for single-layered graphene. It is shown that length scale parameter plays a significant role in the lateral vibration behavior of single-layered graphene sheets. Such effect decreases the natural frequency compared to the predictions of the classical continuum mechanics models. However with increasing the length of the plate, the effect of scale parameter on the natural frequency decreases. For validating the results of this method, the results obtained herein are compared with the existing nonlocal and molecular dynamics results and good agreement with the latter is observed. پرونده مقاله
      • دسترسی آزاد مقاله

        48 - Finite Element Modeling of the Vibrational Behavior of Single-Walled Silicon Carbide Nanotube/Polymer Nanocomposites
        S Rouhi R Ansari A Nikkar
        The multi-scale finite element method is used to study the vibrational characteristics of polymer matrix reinforced by single-walled silicon carbide nanotubes. For this purpose, the nanoscale finite element method is employed to simulate the nanotubes at the nanoscale. چکیده کامل
        The multi-scale finite element method is used to study the vibrational characteristics of polymer matrix reinforced by single-walled silicon carbide nanotubes. For this purpose, the nanoscale finite element method is employed to simulate the nanotubes at the nanoscale. While, the polymer is considered as a continuum at the larger scale. The polymer nanotube interphase is simulated by spring elements. The natural frequencies of nanocomposites with different nanotube volume percentages are computed. Besides, the influences of nanotube geometrical parameters on the vibrational characteristics of the nanocomposites are evaluated. It is shown that reinforcing polymer matrix by single-walled silicon carbide nanotubes leads to increasing the natural frequency compared to neat resin. Increasing the length of the nanotubes at the same diameter results in increasing the difference between the frequencies of nanocomposite and pure polymer. Besides, it is observed that clamped-free nanocomposites experience a larger increase in the presence of the nanotubes than clamped-clamped nanotube reinforced polymers. پرونده مقاله
      • دسترسی آزاد مقاله

        49 - Numerical Solution of the Burgers' Equation Based on Sinc Method
        Ghasem Kazemi Gelian Mohammad Ali Fariborzi Araghi
        Burgers' equation arises in various areas of applied mathematics,‎‎such as modeling of dynamics‎, ‎heat conduction‎, ‎and acoustic‎‎waves‎ Also‎, ‎this equation has a large variety of applications in‎‎the modeling of w چکیده کامل
        Burgers' equation arises in various areas of applied mathematics,‎‎such as modeling of dynamics‎, ‎heat conduction‎, ‎and acoustic‎‎waves‎ Also‎, ‎this equation has a large variety of applications in‎‎the modeling of water in unsaturated soil‎, ‎dynamics of soil‎‎water‎, ‎models of traffic‎, ‎turbulence and fluid flow‎, ‎mixing and‎‎turbulent diffusion. Many researchers tried to find analytic and numerical solutions of‎‎ this equation by different methods.Sinc method is a powerful numerical tool for finding fast and‎‎accurate solution in various areas of problems.‎In this paper‎, ‎numerical solution of Burgers' equation‎‎is considered by applying Sinc method‎. ‎For this purpose‎, ‎we apply‎‎Sinc method in cooperative with a classic finite difference‎‎formula to‎ ‎Burgers'equation‎. ‎‎The purpose of this paper is to extend the application of the‎‎sinc method for solving Burgers'equation by considering stability‎‎analysis of the method.‎ Numerical examples are provided to verify the validity of proposed method پرونده مقاله
      • دسترسی آزاد مقاله

        50 - The combined Sinc-Taylor expansion method to solve Abel's integral equation
        M Fariborzi Araghi Gh Kazami-Gelian
        In this paper , numerical solotion of Abel's integral equationby using the Taylor expanssion of the unknown functionvia collection method based on Sinc is considered...
        In this paper , numerical solotion of Abel's integral equationby using the Taylor expanssion of the unknown functionvia collection method based on Sinc is considered... پرونده مقاله
      • دسترسی آزاد مقاله

        51 - استعاره به توان دو2 در گونه‌ای هنرسازه‌ی ترکیبی (استعاره‌های مصرّحه و مکنیه در «کنایه‌ی استعاری2 ـ ایهامی»)
        مصطفی میردار رضایی
        هنرسازه‌های ترکیبی که در مقابل صناعات منفرد قرار می‌گیرند، بسیار دیر و در مطالعات اخیر بلاغی کشف و معرّفی شدند؛ از این‌رو، هنوز شناخت همه‌جانبه و دقیق این شگردهای نویافته به زمان و پژوهش‌‌های بیشتری نیاز دارد. یکی از انواع هنرسازه‌های ترکیبی، صناعت کنایه‌ی استعاری ـ ایه چکیده کامل
        هنرسازه‌های ترکیبی که در مقابل صناعات منفرد قرار می‌گیرند، بسیار دیر و در مطالعات اخیر بلاغی کشف و معرّفی شدند؛ از این‌رو، هنوز شناخت همه‌جانبه و دقیق این شگردهای نویافته به زمان و پژوهش‌‌های بیشتری نیاز دارد. یکی از انواع هنرسازه‌های ترکیبی، صناعت کنایه‌ی استعاری ـ ایهامی است که تاکنون چند پژوهش‌ در زمینه‌ی این شگرد آمیغی انجام‌شده‌ و گونه‌هایی از آن مورد بررسی قرار گرفته است. این مطالعه که به روش توصیفی ـ تحلیلی و با استفاده از ابزارهای کتابخانه‌ای نوشته‌ شده‌‌است، ضمن بازنگری در نام‌های هنرسازه‌های ترکیبی و تغییر و اصلاح آن‌ها، به بررسی یکی از گونه‌های هنرسازه‌ی ‌کنایه‌ی استعاری ـ ایهامی می‌پردازد که تاکنون به لحاظ نظری و مستقل بدان پرداخته نشده‌است. نیز کوشش این جستار بر آن است که با الگوبرداری از ظاهر مبحث توان دانش ریاضیات، بدون ایجاد تغییر در نام اصلی هنرسازه و برافزودن صناعتی دیگر به آن، دو گونه‌ی متمایز از یکدیگر را تفکیک کند. پرونده مقاله
      • دسترسی آزاد مقاله

        52 - Contamination of arable topsoil by organic and inorganic pollutants around petroleum products handling facilities
        Gregory Sikakwe Bennet Ilaumo
        The concentrations of heavy metals (inorganics) and poly aromatic hydrocarbons (organics) were determined in soils around fueling stations and automobile workshops. Mean concentrations of nickel, lead, cadmium and vanadium were 636, 1379, 12.0 and 18.0 µg/kg, resp چکیده کامل
        The concentrations of heavy metals (inorganics) and poly aromatic hydrocarbons (organics) were determined in soils around fueling stations and automobile workshops. Mean concentrations of nickel, lead, cadmium and vanadium were 636, 1379, 12.0 and 18.0 µg/kg, respectively. Flourene, benzo (a) pyrene, benzo (b) fluoranthene and benzo (ghi) pyrelene recorded means of 2.01, 2.014, 1.14 and 1.12 µg/kg, respectively, but other poly aromatic hydrocarbons recorded means <1. Heavy metals levels were higher at sites of activities than the control site. Phenanthrene, naphthalene and benzo (k) fluoranthene were present at control site but absent in some locations of activity. These showed they were not only from petroleum products handling facilities. Mean levels of both inorganics and organics were below world standards for agricultural soil quality. Principal component analysis of heavy metals produced two principal components that explained 40.72% and 36.90% of the total variance. These reflect geological weathering, automobile exhaust and petroleum combustion sources. Analysis of poly aromatic hydrocarbons data produced four principal components, which explained 36.30%, 19.96%, 15.19% and 12.81% of total variance. The sources of these organics are internal combustion of gasoline, kerosene and rock weathering. Diagnostic ratios ranged from 0.3-0.94 showing that poly aromatic hydrocarbons are of pyrogenic and petroleum combustion origin. Single pollution index means ranged from 0.0002-0.02 and Numerov composite pollution index attained a mean of 0.028. Therefore, the soil is unpolluted and heavy metals levels are not toxic to human health. The study provides information on sources of soil pollutants and their environmental and health risks. پرونده مقاله
      • دسترسی آزاد مقاله

        53 - مطالعه نظری جذب متان بر روی نانولوله کربنی تک دیواره (0و8) آرایش یافته با دیمر نقره - پالادیوم
        زهرا کرمی هرستانی صابر جمالی حاجیانی
        در مقاله حاضر نانولوله کربنی (0و8) آرایش یافته با دیمر نقره-پالادیوم و خواص حسگری آن در مجاورت مولکول متان، با استفاده از نظریه تابعی چگالی مورد بررسی قرار گرفته است. جذب مولکول متان بر روی ساختار از نوع فیزیکی و گرماده با انرژی جذب 340meV- است. مقدار انرژی جذب حاکی از چکیده کامل
        در مقاله حاضر نانولوله کربنی (0و8) آرایش یافته با دیمر نقره-پالادیوم و خواص حسگری آن در مجاورت مولکول متان، با استفاده از نظریه تابعی چگالی مورد بررسی قرار گرفته است. جذب مولکول متان بر روی ساختار از نوع فیزیکی و گرماده با انرژی جذب 340meV- است. مقدار انرژی جذب حاکی از افزایش قابل توجه جذب مولکول متان بر روی نانولوله آرایش یافته در مقایسه با نانولوله خالص(80meV-) می‌باشد. ساختار پیشنهادی در حالت بدون گاز یک نیمه هادی مغناطیسی دوقطبی با گاف وارونگی اسپین بسیار کوچک برابر با 150meV- است، از سوی دیگر انرژی جذب متان بر روی ساختار مقدار قابل توجه در حدود دو برابر گاف انرژی می‌باشد. همین امر امکان تزریق حامل به نانولوله در اثر گرمای واکنش و به دنبال آن تغییر هدایت را فراهم می‌آورد. بنابراین ساختار پیشنهادی، پتانسیل به‌کارگیری به عنوان حسگر بر مبنای تغییر دمای واکنش و تغییر رسانایی را دارا می‌باشد. پرونده مقاله
      • دسترسی آزاد مقاله

        54 - A Heuristic Algorithm for Solving Single Machine Scheduling Problem with Periodic Maintenance
        Amir Ebrahimi Zade Mohammad Bagher Fakhrzad Mohsen Hasaninezhad
        Abstract. In this paper, the scheduling problem with nonresumable jobs and maintenance process is considered in order to minimize the makespan under two alternative strategies. The first strategy is to implement the maintenance process on the machine after a predetermin چکیده کامل
        Abstract. In this paper, the scheduling problem with nonresumable jobs and maintenance process is considered in order to minimize the makespan under two alternative strategies. The first strategy is to implement the maintenance process on the machine after a predetermined time period and the second one is to consider the maximum number of jobs that can be done with an especial tool. We propose a new mathematical formulation for the aforementioned problem and regarding the problem is included in the NP-Hard class of problems, in the second part of the paper, we propose a heuristic algorithm in order to solve the problem in a reasonable time. Also we compare the performance of the proposed algorithm with existing methods in the literature. Computational results showed that the proposed algorithm is able to attain optimum solutions in most cases and also corroborate its better performance than the existing heuristic methods in the literature. پرونده مقاله
      • دسترسی آزاد مقاله

        55 - A Genetic Algorithm with Modified Crossover Operator for a Two-Agent Scheduling Problem
        Maziyar Yazdani Fariborz Jolai
        The problem of scheduling with multi agent has been studiedfor more than one decade and significant advances have been madeover the years. However, most work has paid more attention to the conditionthat machines are available during planning horizon. Motivatedby the obs چکیده کامل
        The problem of scheduling with multi agent has been studiedfor more than one decade and significant advances have been madeover the years. However, most work has paid more attention to the conditionthat machines are available during planning horizon. Motivatedby the observations, this paper studies a two-agent scheduling modelwith multiple availability constraint. Each agent aims at minimizing afunction which depends only on the completion times of its jobs. Theproblem is to find a schedule that minimizes the objective function ofone agent, subject to the objective function of the other agent does notexceed a given threshold Q. some new dominance properties for thisproblem percent and next, using these properties, we develop a geneticalgorithm with modified crossover for the problem. Computational resultsare also presented to determine the performance of the proposedgenetic algorithms. پرونده مقاله
      • دسترسی آزاد مقاله

        56 - Study of Source Limitation and Combined Effect of Chemical and Biological Fertilizer on Yield and Qualitative Traits of Seed (lipid, Nitrogen and Protein Content) Corn
        Fatemeh Noraki Ebrahim Panahpor Hasan Rahmani Abdolah Ayaran
        BACKGROUND: Nitrogen is a basic plant component, playing a decisive role in the intensification of plant production. Bio-fertilizers play a very significant role in improving soil fertility by fixing atmospheric nitrogen, both, in association with plant roots and withou چکیده کامل
        BACKGROUND: Nitrogen is a basic plant component, playing a decisive role in the intensification of plant production. Bio-fertilizers play a very significant role in improving soil fertility by fixing atmospheric nitrogen, both, in association with plant roots and without it, insoluble soil phosphates and produces plant growth substances in the soil. OBJECTIVES: The current study was conducted to investigate the integrated management of biological and chemical fertilizers on seed qualitative traits and crop production of single cross 701 corn under warm and dry climate condition. METHODS: This research was carried out via split plot experiment based on randomized complete blocks design with four replications along 2013-2014 year. The main factor included combination nitrogen fertilizer and biologic fertilizer; Nitroxin (a1: 100 Nitrogen fertilizer × 100% biofertilizer, a2: 75% Nitrogen fertilizer × 100% biofertilizer, a3: 50% Nitrogen fertilizer × 100% biofertilizer, a4: 25% Nitrogen fertilizer × 100% biofertilizer) and Defoliation (b1: non defoliation, b2: Cut lower leaves of the cob, b3: Cut upper leaves of the cob) belonged to sub plot. RESULT: Assessment analysis of variance showed effect of combination urea and Nitroxin (instead seed lipid content), defoliation and interaction effect of treatments on all measured traits was significant at 5% probability level. Evaluation mean comparison result of interaction effect of treatments indicated maximum amount of measured characteristics (instead seed nitrogen content) was noted for 50% nitrogen fertilizer × 100% biofertilizer × non defoliation and the lowest ones belonged to 25% nitrogen fertilizer × 100% biofertilizer × cut upper leaves of the cob. CONCLUSION: According to the results, it seems that biological fertilizers in combination with chemical fertilizers provide increased access to food and increase the quantitative and qualitative yield of grain and increase the amount of nutrients in the seed. Also defoliation had great effect on nutrient content. Defoliation the upper leaves of the cob increases the amount of these elements but reduces the economic performance of the single-cross 701 hybrid. پرونده مقاله
      • دسترسی آزاد مقاله

        57 - Study of the effects of solvent and temperature on the Connections of the MTX and L-FMTX with single-walled carbon nanotubes using QM and MM
        Vahid Khodadadi neda hasanzadeh Hoorye Yahyaei Ayeh Raayatzadeh
        In this study, using the density functional theory (DFT) computational methods and Monte Carlo simulation, the interaction of methotrexate (MTX) and its derivative (L-FMTX) with Single-walled carbon nanotubes (SWCNTS) was investigated. Through the DFT method, the effect چکیده کامل
        In this study, using the density functional theory (DFT) computational methods and Monte Carlo simulation, the interaction of methotrexate (MTX) and its derivative (L-FMTX) with Single-walled carbon nanotubes (SWCNTS) was investigated. Through the DFT method, the effects of different solvents (water, methanol, ethanol, dimethyl sulfoxide and dimethylformamide) on the interaction of methotrexate (MTX) and its derivative (L-FMTX) with Single-walled carbon nanotubes within the Onsager self-consistent reaction field (SCRF) model, as well as the effects of temperature on the stability of interactions between compounds in various solvents were studied. Using theoretical calculations, The effects of temperature on the stability of the bond between the compounds and total density of states (DOS) as well as boundary molecular orbitals (FMOS) related to the mentioned compounds were investigated. The molecular properties of compounds such as ionization potential (I), electron affinity (A), chemical hardness (η), electronic chemical potential (µ) and electronegativity (χ) were also used. The interaction resulting from the binding of methotrexate (MTX) to Single-walled carbon nanotubes as well as the interaction of the methotrexate derivative (L-FMTX) with Single-walled carbon nanotubes were studied through molecular mechanics using the Monte Carlo simulation method in the four AMBER, OPLS, CHARMM and MM+ force fields at different temperatures. The results showed that the MTX structure with the SWCNT single wall nanotube was more stable than the L-FMTX structure with SWCNT single wall nanotube. The results showed that the most stable solvent for the above-mentioned structures was water and that the most efficient force field was MM+. پرونده مقاله
      • دسترسی آزاد مقاله

        58 - ارزیابی کیفی و انتخاب بهینه ی پیمانکاران EPC در مناقصات تک مرحله ایی با استفاده از تکنیک FAHP
        Leila Jahangiri Farad Dehdar
        موضوع ارزیابی کیفی پیمانکاران EPC در مناقصات تک مرحله ایی به روش تحلیل سلسله مراتبی فازی، برای اولین بار انجام می پذیرد و سایر تحقیقات انجام شده مشابه با این موضوع، جامعیت انتخاب پیمانکار EPC را ندارند. تحقیقات انجام شده تا کنون، در خصوص پیمانکاران تک منظوره بوده است (م چکیده کامل
        موضوع ارزیابی کیفی پیمانکاران EPC در مناقصات تک مرحله ایی به روش تحلیل سلسله مراتبی فازی، برای اولین بار انجام می پذیرد و سایر تحقیقات انجام شده مشابه با این موضوع، جامعیت انتخاب پیمانکار EPC را ندارند. تحقیقات انجام شده تا کنون، در خصوص پیمانکاران تک منظوره بوده است (منظور پیمانکاران اجرا یا تأمین کنندگان و فروشندگان تجهیزات و لوازم مورد نیاز پروژهها) در حالی که در این تحقیق ارزیابی کیفی پیمانکاران EPC به روش FAHP مورد بررسی قرار گرفته است. پیمانکاران EPC پیمانکارانی هستند که به طور همزمان فازهای اصلی پروژه شامل مهندسی Engineering، تامین تجهیزات داخلی و خارجی Procurement، و فعالیتهای ساختمانی و اجرایی Construction را به انجام رسانند و پروژه را در مدت زمان مشخص به ظرفیت رسانده و برای دوره زمانی تعیین شده گارانتی نمایند) تحقیق حاضر از سه بخش کلی ا- جمعآوری اطلاعات پیمانکاران، 2- مقایسه ویژگیهای پیمانکاران، 3- رتبه بندی پیمانکاران تشکیل شده است. در این تحقیق، جهت امتیاز دهی به معیار و زیر معیارها از نظرات و نتایج ارزیابی-های کارشناسان خبره (12نفر) و صاحب نظر در زمینهی انتخاب پیمانکاران و مناقصات انتخاب پیمانکارانEPC با استفاده از پرسشنامه استفاده شده است و جهت اولویت بندی عوامل روشFAHP به کار گرفته گرفته شده و جهت کاهش خطای محاسباتی و زمان فرآیند ارزیابی و جلوگیری از محاسبات پر حجم و دستی از نرم افزار Expert Choice بهره برده شده است. پرونده مقاله
      • دسترسی آزاد مقاله

        59 - باز اندیشی نسبیت زبانی با رویکرد شناختی و استناد بر داده های زبان فارسی
        ابراهیم بدخشان حسن آزموده
        In this article, we investigate the relation between language and culture, linguistically and psycholinguistically, excellently dealt with in Sapir-Whorf hypothesis. After portraying the subject, we attempt to elucidate it with the analysis of pros and cons of the view چکیده کامل
        In this article, we investigate the relation between language and culture, linguistically and psycholinguistically, excellently dealt with in Sapir-Whorf hypothesis. After portraying the subject, we attempt to elucidate it with the analysis of pros and cons of the views on this area. It will then be claimed that the system of linguistic forms has a strong effect on the world-view of speakers and also acquiring and perceiving of many concepts, relying on rational and empirical evidences extracted from known languages such as English, Persian, Arabic and also distant languages such as Hopi, Maya, etc. Based on cognitive approach, we will also try to prove that single concepts and compound concepts, contrary to the assumption, function divergently in thinking process. پرونده مقاله
      • دسترسی آزاد مقاله

        60 - بهینه‌سازی مبدل حرارتی پوسته-لوله با بافل منفذدار کواترفویل با استفاده از الگوریتم‌های فراابتکاری
        سید ایمان هاشمی مرغملکی هادی اسکندری
        در این پژوهش، مشخصه های حرارتی و هیدرولیکی سمت پوسته مبدل حرارتی پوسته-لوله با بافل منفذدار کواترفویل به وسیله الگوریتم های فراابتکاری گرگ خاکستری و ژنتیک به صورت تک هدفه و چند هدفه بهینه سازی می شود. تابع های هدف، ظرفیت انتقال حرارت برای مقدار بیشینه و اتلاف فشار چکیده کامل
        در این پژوهش، مشخصه های حرارتی و هیدرولیکی سمت پوسته مبدل حرارتی پوسته-لوله با بافل منفذدار کواترفویل به وسیله الگوریتم های فراابتکاری گرگ خاکستری و ژنتیک به صورت تک هدفه و چند هدفه بهینه سازی می شود. تابع های هدف، ظرفیت انتقال حرارت برای مقدار بیشینه و اتلاف فشار برای مقدار کمینه می باشد. متغیرهای مبدل حرارتی پوسته-لوله برای بهینه سازی عبارتند از: قطر و تعداد لوله ها، عدد رینولدز، فاصله بین بافل ها و ارتفاع منفذ کواترفویل. مقادیر بهینه شده برای آرایش مربع و مثلث دسته لوله ها به دست آمده است. نتایج نشان داده است که برای بیشترین انتقال حرارت بافل کواترفویل مقادیر قطر لوله 03/0 متر، تعداد لوله ها 30 عدد، مقدار عدد رینولدز 20000، ارتفاع منفذ 0018/0 متر و فاصله بین بافل ها 15/0 متر است. برای کمترین مقدار افت فشار قطر لوله ها 03/0 متر برای آرایش مربع و 01/0 متر برای آرایش مثلث، عدد رینولدز 5000، ارتفاع منفذ 003/0 متر و فاصله بین بافل ها 25/0 متر است. در بهینه سازی چند هدفه قطر لوله ها 03/0 متر و تعداد لوله ها 30 عدد حاصل شده است. بهینه سازی به وسیله الگوریتم گرگ خاکستری والگوریتم ژنتیک نتایج یکسانی برای مبدل حرارتی پوسته-لوله با بافل کواتر فویل در بر داشته است. پرونده مقاله
      • دسترسی آزاد مقاله

        61 - پیش بینی عملکرد چیلر جذبی تک اثره بخار با استفاده از شبکه عصبی مصنوعی
        فرشاد پناهی زاده مهدی حمزه ای محمود فرزانه گرد
        چیلرهای جذبی تک اثره با توجه به دما و فشار منبع حرارتی مورد استفاده به دو نوع تک اثره آب گرم و بخار تقسیم می شوند. که نوع تک اثره بخار آن به دلیل توانایی استفاده از بخار دور ریز در صنایع نفت، گاز و پتروشیمی جهت تولید سرمایش فرآیندی و تهویه مطبوعی دارای کاربرد بیشتری است چکیده کامل
        چیلرهای جذبی تک اثره با توجه به دما و فشار منبع حرارتی مورد استفاده به دو نوع تک اثره آب گرم و بخار تقسیم می شوند. که نوع تک اثره بخار آن به دلیل توانایی استفاده از بخار دور ریز در صنایع نفت، گاز و پتروشیمی جهت تولید سرمایش فرآیندی و تهویه مطبوعی دارای کاربرد بیشتری است. در تحقیق حاضر در خصوص پیش بینی عملکرد چیلر جذبی تک اثره بخار از شبکه عصبی مصنوعی استفاده شده که نسبت به روشهای مدلسازی ترمودینامیکی دارای سرعت بالاتر و هزینه محاسباتی کمتری است. شبکه عصبی پرسپترون چند لایه با الگوریتم پس انتشار خطا، تابع محرک تانژانت هیپربولیک و روش آموزش لونبرگ-مارکوارت با تعداد 15285 داده و شاخص ارزیابی میانگین مربع خطا بکار برده شده است. ورودی های شبکه عصبی مصنوعی به ترتیب دمای آب برج خنک کننده ورودی، دمای آب سرمایشی ورودی، دمای بخار ورودی، دمای آب سرمایشی خروجی و راندمان مبدل حرارتی محلول هستند و خروجی های شبکه عصبی نیز ضریب عملکرد و انرژی حرارتی مصرفی چیلر می باشند. نتایج حاصل از تحقیق حاضر نشان می دهند که روش شبکه عصبی مصنوعی توانایی پیش بینی ضریب عملکرد و انرژی حرارتی مصرفی چیلر جذبی تک اثره را با میانگین مربع خطا به ترتیب 7-10×183/3 و 8-10×466/7 دارا می باشد که حاکی از دقت بالای این روش در پیش بینی عملکرد چیلر جذبی است. پرونده مقاله
      • دسترسی آزاد مقاله

        62 - سیاستگذاری مؤلفه‌های فضایی در شکل گیری هسته‌های جدید شهری
        عزیز محمدیاری بختیار عزت پناه کریم حسین زاده دلیر
        یکی از مهم‌ترین موضوعات مهم در مدیریت شهری امروز، موضوع رشد سریع جمعیت و به تبع آن گسترش شتابان شهرها می‌باشد، که به دلیل عدم وجود برنامه و مدیریت کارآمد با این پدیده، این شهرها را با مشکلات عدیده‌ای روبه رو نموده است. این مسائل اثراتش را بر روی ساختار فضایی شهرها به اش چکیده کامل
        یکی از مهم‌ترین موضوعات مهم در مدیریت شهری امروز، موضوع رشد سریع جمعیت و به تبع آن گسترش شتابان شهرها می‌باشد، که به دلیل عدم وجود برنامه و مدیریت کارآمد با این پدیده، این شهرها را با مشکلات عدیده‌ای روبه رو نموده است. این مسائل اثراتش را بر روی ساختار فضایی شهرها به اشکال مختلفی نشان داده است که یکی از این موارد توسعه فضایی شهرها بصورت چندهسته ای می باشد. ‌پدیده چند هسته‌ای شدن ذاتی کلانشهرها بوده و مطالعات حاکی از کارایی بیشتر و تأثیر روش‌های کمی در شناسایی هسته‌های عملکردی است. هدف اصلی این مقاله ضمن معرفی مؤلفه‌های فضایی در شکل گیری هسته‌های جدید شهری می‌باشد. روش تحقیق اسنادی - تحلیلی بوده و یافته‌های آن نشان می‌دهد که الگوی توسعه حوزه مرکزی در تأمین شیوه‌های متنوع حمل و نقل، ایجاد فضاهای عمومی به‌منظور خلق جوامع متمایز و جذاب، احیاء مرکز شهر، سیاست‌های تراکمی جهت نیل به توسعه فشرده و حفاظت از فضاهای سبز و باز موفق بوده اما در دستیابی به معیارهای مشارکت شهروندان و تصمیم سازی‌های بی‌طرفانه و قابل پیش بینی، دچار ضعف است. پرونده مقاله
      • دسترسی آزاد مقاله

        63 - A Theoretical Study of H2S and CO2 Interaction with the Single-Walled Nitrogen Doped Carbon Nanotubes
        M. Oftadeh M. Rezaeisadat A. Rashidi
        The physical adsorption of hydrogen sulfide and carbon dioxide gases on the zigzag (5,0) carbon nanotubes doped with nitrogen was investigated through the application of B3LYP/6-31G* at the level of theory on Gaussian 03 software. A variety of stable and high abundance چکیده کامل
        The physical adsorption of hydrogen sulfide and carbon dioxide gases on the zigzag (5,0) carbon nanotubes doped with nitrogen was investigated through the application of B3LYP/6-31G* at the level of theory on Gaussian 03 software. A variety of stable and high abundance structures of nitrogen doped carbon nanotubes were considered in order to study the interaction between the mentioned gases in different situations by taking rotates of sour gas molecules in the inner and outer walls. Features such as correction of energy adsorption, energy gap, dipole moment, charge distribution, conductors and energy barrier as well as the main parameters such as the gas adsorption energy on the nanotubes were obtained. The results suggest that the nitrogen atom in the structure of carbon nanotubes causes to increase the adsorption of hydrogen sulfide and carbon dioxide gases. Adsorption of hydrogen sulfide on the nanotubes is more effective than carbon dioxide. Moreover, for both gases the adsorption processes are thermodynamically favorable. These nanotubes can be economically used to separate sour gases from natural gases and to recover the sulfur. پرونده مقاله
      • دسترسی آزاد مقاله

        64 - طراحی مدل نوین خط مشی گذاری نظارت بر تجارت فرامرزی با استفاده از نظریه داده بنیاد
        علی بعیدی مفردنیا عباس منوریان فرهاد رهبر علی اصغر پورعزت
        هدف : هدف اصلی این پژوهش طراحی مدل نوین خط‌مشی‌گذاری برای نظارت بر تجارت فرامرزی می باشد.روش: در این تحقیق از روش ﭘﮋوﻫﺶﻛﻴﻔﻲ مبتنی بر رویکرد ﻧﻈﺮﻳﺔ دادهﺑﻨﻴﺎد استفاده گردیده است.کدگذاری‌ها در سه مرحله کدگذاری باز، کدگذاری محوری و کدگذاری انتخابی و از طریق مصاحبه عمیق با خب چکیده کامل
        هدف : هدف اصلی این پژوهش طراحی مدل نوین خط‌مشی‌گذاری برای نظارت بر تجارت فرامرزی می باشد.روش: در این تحقیق از روش ﭘﮋوﻫﺶﻛﻴﻔﻲ مبتنی بر رویکرد ﻧﻈﺮﻳﺔ دادهﺑﻨﻴﺎد استفاده گردیده است.کدگذاری‌ها در سه مرحله کدگذاری باز، کدگذاری محوری و کدگذاری انتخابی و از طریق مصاحبه عمیق با خبرگان این حوزه صورت پذیرفته است. در اﻳﻦ پژوهش ﺟﺎﻣﻌﺔ آماری صاحب نظران حوزه نظارت بر تجارت فرامرزی ﺷﺎﻣﻞ ﻣﺪﻳﺮان، ﻣﺘﺨﺼﺼان وﻛﺎرﺷﻨﺎﺳﺎن سازمان گمرک به عنوان مهمترین سازمان در ﻣﺤﻴﻂ نظارت برتجارت فرامرزی ﻣﺪﻧﻈﺮ قرار گرفته ﻛﻪ ﺑﺎ نمونه‌گیری به روش نظـری از آﻧﺎن ﻣﺼﺎﺣﺒﻪ به عمل آمد. در این تحقیق از مصاحبة دهم، تکرار در داده‌ها تشخیص داده شده و دیگر مفهوم جدیدی شناسایی نشد، ولی به منظور دقت و اطمینان بیشتر با دوازده نفر مصاحبه انجام شد. به منظور ارزشیابی این پژوهش از معیار مقبولیت به جای معیارهای روایی و پایایی که بیشتر متناسب با پژوهش‌های کیفی می باشد استفاده گردیده است.یافته‌ها: ﺑـﺮ اﺳـﺎس یافته ها، از طریق کدگذاری باز بیش از 298 مفهوم شناسایی که پس از حذف موارد تکراری در نهایت 257 مفهوم اشباع شده، ساخته شد. که در کدگذاری محوری در 28 مقوله طبقه بندی گردیدند. درنهایت و در مرحله کدگذاری انتخابی مقوله محوری انتخاب و سایر مقوله‌های دیگر به این مقوله محوری مرتبط و مدل خط‌مشی‌گذاری نظارت بر تجارت فرامرزی طراحی و تدوین گردید. نتیجه‌گیری: مهم ترین عامل در مدل خط‌مشی‌گذاری به منظور خط‌مشی‌گذاری نظارت بر تجارت فرامرزی با بهبود ارائه تسهیلات و انجام کنترل موثر بطور توامان، پنجره واحد تجارت فرامرزی است. همچنین مدیریت ریسک هوشمند، حسابرسی پس از ترخیص، فعالان مجاز اقتصادی، مدیریت مشترک مرزی و نهاد نظارت بر تجارت فرامرزی از اهم کنش‌های مرتبط به منظورخط‌مشی‌های موثر در بهبود ارائه تسهیلات و انجام کنترل موثر بطور توامان در تجارت فرامرزی تبیین گردیدند. پرونده مقاله
      • دسترسی آزاد مقاله

        65 - Inventory of Single Oak Trees Using Object- Based Method on WorldView-2 Satellite Images and on Earth
        yousef taghi mollaei Abdolali Karamshahi Seyyed Yousef Erfanifard
        Remote sensing provides data types and useful resources for forest mapping. Today,one of the most commonly used application in forestry is the identification of singletree and tree species compassion using object-based analysis and classification ofsatellite or aerial i چکیده کامل
        Remote sensing provides data types and useful resources for forest mapping. Today,one of the most commonly used application in forestry is the identification of singletree and tree species compassion using object-based analysis and classification ofsatellite or aerial images. Forest data, which is derived from remote sensing methods,mainly focuses on the mass i.e. parts of the forest that are largely homogeneous, inparticular, interconnected) and plot-level data. Haft-Barm Lake is the case study whichis located in Fars province, representing closed forest in which oak is the valuablespecies. High Resolution Satellite Imagery of WV-2 has been used in this study. Inthis study, A UAV equipped with a compact digital camera has been used calibratedand modified to record not only the visual but also the near infrared reflection (NIR) ofpossibly infested oaks. The present study evaluated the estimation of forest parametersby focusing on single tree extraction using Object-Based method of classification witha complex matrix evaluation and AUC method with the help of the 4th UAV phantombird image in two distinct regions. The object-based classification has the highest andbest accuracy in estimating single-tree parameters. Object-Based classification methodis a useful method to identify Oak tree Zagros Mountains forest. This study confirmsthat using WV-2 data one can extract the parameters of single trees in the forest. An overall Kappa Index of Agreement (KIA) of 0.97 and 0.96 for each study site has been achieved. It is also concluded that while UAV has the potential to provide flexible and feasible solutions for forest mapping, some issues related to image quality still need to be addressed in order to improve the classification performance. پرونده مقاله
      • دسترسی آزاد مقاله

        66 - Inventory of Single Oak Trees Using Object-Based Method on WorldView-2 Satellite Images and Earth
        yousef taghi mollaei abdolali karamshahi Seyyed Yousef Erfanifard
        Remote sensing provides data types and useful resources for forest mapping. Today, one of the mostcommonly used application in forestry is the identification of single tree and tree species compassionusing object-based analysis and classification of satellite or aerial چکیده کامل
        Remote sensing provides data types and useful resources for forest mapping. Today, one of the mostcommonly used application in forestry is the identification of single tree and tree species compassionusing object-based analysis and classification of satellite or aerial images. Forest data, which is derivedfrom remote sensing methods, mainly focuses on the mass i.e. parts of the forest that are largelyhomogeneous, in particular, interconnected) and plot-level data. Haft-Barm Lake is the case study whichis located in Fars province, representing closed forest in which oak is the valuable species. HighResolution Satellite Imagery of WV-2 has been used in this study. In this study, A UAV equipped with acompact digital camera has been used calibrated and modified to record not only the visual but also thenear infrared reflection (NIR) of possibly infested oaks. The present study evaluated the estimation offorest parameters by focusing on single tree extraction using Object-Based method of classification with acomplex matrix evaluation and AUC method with the help of the 4th UAV phantom bird image in twodistinct regions. The object-based classification has the highest and best accuracy in estimating single-treeparameters. Object-Based classification method is a useful method to identify Oak tree Zagros Mountainsforest. This study confirms that using WV-2 data one can extract the parameters of single trees in theforest. An overall Kappa Index of Agreement (KIA) of 0.97 and 0.96 for each study site has beenachieved. It is also concluded that while UAV has the potential to provide flexible and feasible solutionsfor forest mapping, some issues related to image quality still need to be addressed in order to improve theclassification performance. پرونده مقاله
      • دسترسی آزاد مقاله

        67 - Single Pixel Imaging using Compressive Sensing and Spatial Light Modulator
        Mohammad Roueinfar Mahdi Salmanian Ali Aghakasiri Abbas Bashiri Saeed Babanezhad
        Conventional cameras based on an array of pixels (CCD or CMOS) are commonly used to capture a target image at a certain distance. In this type of camera, all pixels are used to create the image. For CCD-based cameras at other wavelengths, including infrared and terahert چکیده کامل
        Conventional cameras based on an array of pixels (CCD or CMOS) are commonly used to capture a target image at a certain distance. In this type of camera, all pixels are used to create the image. For CCD-based cameras at other wavelengths, including infrared and terahertz, having all the pixels increases the cost of the camera. The aim of this study is to design and build an imaging setup using a single pixel method to reduce the cost of the camera and to reconstruct the target image using less data. We verify this method for visible band due to availability of visible light equipment that can be generalized this method to other wavelengths. We use a spatial light modulator (SLM) produces two-level optical masks with random distribution with 20 x 20 pixels and a size of 10 x 10 cm and illuminates the target at a repetition rate of 1 Hz. The reflection of each mask from the target captured by a CCD camera and then we average of all pixels of the CCD to equate it with a single-pixel detector. The target image is reconstructed using a compressive sensing algorithm. The process of reconstructing the target image is performed using a minimum number of masks. We use the two norms L1 and TV to retrieve the target image. The simulation results show norm TV is more successful in target image retrieval. Also, with increasing the number of masks, the success rate in retrieving the target image increases. پرونده مقاله
      • دسترسی آزاد مقاله

        68 - مروری بر تولید روغن تک سلولی از ضایعات مواد غذایی
        نهایه نجفی پیمان رجایی
        روغن تک سلولی SCOیک منبع جایگزین مناسب برای روغن ها است، زیرا می توان از آن به عنوان مواد اولیه در تولید سوخت زیستی و همچنین به عنوان گزینه مناسب در تولید اسیدهای چرب ضروری مناسب برای تغذیه انسان و یا به عنوان مکمل در خوراک دام استفاده نمود. با این حال قابلیت استفاده از چکیده کامل
        روغن تک سلولی SCOیک منبع جایگزین مناسب برای روغن ها است، زیرا می توان از آن به عنوان مواد اولیه در تولید سوخت زیستی و همچنین به عنوان گزینه مناسب در تولید اسیدهای چرب ضروری مناسب برای تغذیه انسان و یا به عنوان مکمل در خوراک دام استفاده نمود. با این حال قابلیت استفاده از SCO به دلیل قیمت بالای مواد اولیه مورد استفاده در آن محدود است. فرآیند تخمیر با استفاده از پسماندهای کشاورزی و صنعتی ارزان قیمت می تواند این مشکل را برطرف کند که برای تولید SCO قابل اجرا هستند. استفاده از این محصولات جانبی به عنوان منبع اصلی کربن در تخمیر نه تنها به طور قابل توجهی هزینه های کلی تولید SCO را کاهش می دهد، بلکه باعث می شود تصفیه جریان های زباله تولید شده، در نتیجه اثرات منفی بر محیط زیست کاهش یابد. از آنجا که محصولات جانبی زیست تخریب پذیر مختلف کشاورزی و صنعتی را می توان در تخمیرهای میکروبی استفاده کرد. هدف این بررسی طبقه بندی و مقایسه بقایای کشاورزی قابل استفاده بر اساس در دسترس بودن آنها است. روغن های تک سلولی لیپیدهایی هستند که از باکتری ها، قارچ ها، مخمرها، جلبک های متقاطع میکروسکوپی و پروتیست ها. این لیپیدها بسته به ترکیب اسیدهای چرب خود کاربردهای متفاوتی دارند. SCOها با محتوای اسیدهای چرب اشباع بالا برای تولید بیودیزل مناسب هستند، در حالی که SCOهای غنی از اسیدهای چرب اشباع نشده برای تغذیه انسان و حیوان مناسب هستند. پرونده مقاله
      • دسترسی آزاد مقاله

        69 - تاثیرلایه متخلخل بر راندمان آب شیرین کن خورشیدی شیب دار یک طرفه-بررسی تجربی
        نادر رهبر علی خوش آهنگ
        در این پژوهش، اثر استفاده از لایه متخلخل روی راندمان آب شیرین کن خورشیدی شیب دار یک طرفه به‌صورت تجربی مطالعه می شود. بدین منظور، دو آب شیرین کن با ابعاد مشابه که یکی به صورت ساده و دیگری به صورت اصلاح شده با ماده متخلخل ساخته شده و به طور هم زمان مورد آزمایش قرار می گی چکیده کامل
        در این پژوهش، اثر استفاده از لایه متخلخل روی راندمان آب شیرین کن خورشیدی شیب دار یک طرفه به‌صورت تجربی مطالعه می شود. بدین منظور، دو آب شیرین کن با ابعاد مشابه که یکی به صورت ساده و دیگری به صورت اصلاح شده با ماده متخلخل ساخته شده و به طور هم زمان مورد آزمایش قرار می گیرند. اسفنج سیاه که دارای ظرفیت حرارتی پایین و خاصیت فیتیله ای می باشد به عنوان ماده متخلخل انتخاب می شود. همه آزمایش ها تحت شرایط آب و هوایی شهر سمنان (در طول جغرافیایی 53 درجه و عرض جغرافیایی 35 درجه) انجام می شوند. نتایج نشان داد که میزان تولید روزانه آب مقطر با قرار دادن اسفنج درون آب‌شیرین‌کن افزایش می یابد. آب شیرین کن های ساده و اصلاح‌شده با ماده متخلخل به ترتیب به میزان 3263 و 3829 سی‌سی بر متر مربع از مساحت مخزن آب شور، آب مقطر تولید می کنند. بر این اساس، آب شیرین کن اصلاح شده حدود 35/17% آب مقطر بیشتری نسبت به آب شیرین کن ساده در طول یک روز و در شرایطی مشابه تولید می کند. روند تغییرات مشابهی بین راندمان روزانه برای آب شیرین کن از یک‌سو و میزان تابش خورشید یا دمای محیط از سوی دیگر در طول آزمایش وجود دارد. پرونده مقاله
      • دسترسی آزاد مقاله

        70 - مروری بر پارامترهای تاثیرگذار در شکل دهی نموی از 1960 تا 2019
        مجتبی حسنلو سینا مکاری
        شکل دهی ورق‌های فلزی به عنوان یکی از مهم ترین شاخه‌های شکل دهی فلزات، از جایگاه ویژه‌ای در زمینه‌های مختلف صنعتی برخوردار می‌باشد. در این فرآیندها با استفاده از مجموعه‌ای از قالب های یکپارچه صلب، تغییر شکل پلاستیک مطلوب در یک ماده خام اولیه ایجاد می‌شود. این قبیل قالب ه چکیده کامل
        شکل دهی ورق‌های فلزی به عنوان یکی از مهم ترین شاخه‌های شکل دهی فلزات، از جایگاه ویژه‌ای در زمینه‌های مختلف صنعتی برخوردار می‌باشد. در این فرآیندها با استفاده از مجموعه‌ای از قالب های یکپارچه صلب، تغییر شکل پلاستیک مطلوب در یک ماده خام اولیه ایجاد می‌شود. این قبیل قالب ها عموماً برای یک قطعه با مشخصات هندسی خاص طراحی و ساخته می‌شوند، به‌طوریکه برای تولید قطعات با شکل‌های هندسی مختلف نیاز به استفاده از قالب های متفاوتی وجود خواهد داشت. طراحی و ساخت قالب های جدید مستلزم صرف زمان و هزینه بالایی می‌باشد. در نتیجه، استفاده از روش‌های فوق برای تولید قطعات تکی و قطعات دسته‌ای با تیراژ پایین غیراقتصادی خواهد بود. به منظورکاهش زمان انتظار و هزینه‌های طراحی و ساخت، توسعه روش‌های شکل‌دهی انعطاف-پذیر می‌تواند به عنوان یک راهکار مناسب در جهت رفع محدودیت‌های فوق مطرح شود. پرونده مقاله
      • دسترسی آزاد مقاله

        71 - شناسایی پارامتر برای مدلهای سلول خورشیدی با استفاده از الگوریتم‌(HBB-BC)
        محمد طلوع عسکری
        اخیراً مدل دقیق مشخصات ولتاژ بر اساس جریان ( I-V) سلولهای خورشیدی تمرکز اصلی محققان مختلف را به خود جذب کرده است. شکل اساسی در مدلسازی دقیق ، کمبود اطلاعات درمورد مقادیر دقیق پارامترهای مدل ، به عنوان مثال جریان نوری، جریان دیود اشباع، مقاومت‌های سری ، مقاومت موازی و فا چکیده کامل
        اخیراً مدل دقیق مشخصات ولتاژ بر اساس جریان ( I-V) سلولهای خورشیدی تمرکز اصلی محققان مختلف را به خود جذب کرده است. شکل اساسی در مدلسازی دقیق ، کمبود اطلاعات درمورد مقادیر دقیق پارامترهای مدل ، به عنوان مثال جریان نوری، جریان دیود اشباع، مقاومت‌های سری ، مقاومت موازی و فاکتور ایده‌آل دیود. به منظور ایجاد یک توافق خوب بین داده‌‌های تجربی و نتایج مدل. شناسایی پارامتر به کمک یک تکنیک بهینه‌سازی مورد نیاز است. به دلیل غیر خطی بودن منحنی (I-V) در سلول‌های خورشیدی ، یک تکنیک بهینه‌سازی مورد نیاز است. در این مقاله بر اساس متدهای شناسایی پارامتر به منظور شناسایی پارامترهای ناشناخته مدل‌های تک دیودی و دو دیودی سلول‌های خورشیدی به کار گرفته شده است. مفهوم ساده، پیاده‌سازی آسان و عملکرد بالا دلایل اصلی شهرت HBB_BC در حل مسائل پیچیده ، بهینه‌سازی است. برای این هدف ، از الگوریتمHBB_BC به منظور تعیین پارامترهای ناشناخته مدل‌ها به کارگرفته می‌شود. میزان تاثیر HBB_BC بوسیله‌ی مطالعات تفضیلی بین تکنیک‌های مختلف مورد بررسی قرار می‌گیرد. نتایج شبیه‌سازی برتری الگوریتم‌HBB_BC را نسبت به سایر الگوریتم‌های مطالعه شده در مدلهای سلولهای خورشیدی آشکار می‌کند. پرونده مقاله
      • دسترسی آزاد مقاله

        72 - معرفی و بررسی باستان‌شناختی گورهای گویجه قلعه مراغه
        حسین ناصری صومعه علیرضا پاشایی محسن سعادتی
        گویجه قلعه مراغه در فاصله ۴۶ کیلومتری جنوب شرق شهرستان مراغه واقع شده است. متاسفانه، در منابع مختلف از این قلعه به اشتباه با اسامی گوجور قلعه و گوهر قلعه یاد می‌شود در این قلعه دو گونه متفاوت تدفینی به دست آمده است که مهمترین آن یک گوردخمه صخره‌ای است که تا به امروز شنا چکیده کامل
        گویجه قلعه مراغه در فاصله ۴۶ کیلومتری جنوب شرق شهرستان مراغه واقع شده است. متاسفانه، در منابع مختلف از این قلعه به اشتباه با اسامی گوجور قلعه و گوهر قلعه یاد می‌شود در این قلعه دو گونه متفاوت تدفینی به دست آمده است که مهمترین آن یک گوردخمه صخره‌ای است که تا به امروز شناخته نشده و به دلیل جمع‌شدن آب نزولات آسمانی در آن موجب گمراهی در تشخیص کاربرد آن به عنوان آب انبار شده است. همچنین، یک فضای مربعی تمام صخره ای و شش نمونه از گورهای صندوقی شکل که قابل قیاس با نمونه های اورارتویی و ماناییست، در این قلعه به دست آمده است. در این پژوهش، سعی گردیده است تا ضمن اصلاح نام محوطه، با بررسی میدانی محوطه و شناسایی قبور و برداشت پلان و تجزیه و تحلیل ساختار و اجزاء فضای موسوم به آب انبار و مقایسه آن با نمونه‌های مشابه، با رد کار کرد آب انبار برای اثر مربوطه کاربرد این فضا را که شامل یک اتاق اصلی با اتاق‌های الحاقی و مدخل ورودی چهارگوش در ترکیب با پله های سنگی وصولی است به عنوان گوردخمه ای از نوع تک اتاقه پیوسته که مربوط به حکام دست نشانده و خراجگزار اورارتویی بوده، مشخص نماییم. پرونده مقاله
      • دسترسی آزاد مقاله

        73 - Face Detection at the Low Light Environments
        Mehdi Asadzadeh Arash Rikhtegar
        Today, with the advancement of technology, the use of tools for extracting information from video are much wider in terms of both visual power and the processing power. High-speed car, perfect detection accuracy, business diversity in the fields of medical, home applian چکیده کامل
        Today, with the advancement of technology, the use of tools for extracting information from video are much wider in terms of both visual power and the processing power. High-speed car, perfect detection accuracy, business diversity in the fields of medical, home appliances, smart cars, humanoid robots, military systems and the commercialization makes these systems cost effective. Among the most widely used image processing tools are detection systems and investigate the faces of people. Change the brightness is one of the challenges in face recognition under complex lighting conditions. There are multiple various methods for removing lighting changes. In this study, it is used of the methods, the non-local means, non-local adaptive means; Retinex single comparative scale and the PCA method input data was provided by using calculated Eigen-face and finally, the face Detection was conducted using the PCA. It should be noted that the used image bases include Extended Yale B and CMU PIE database, which contains a variety of images along with the different lighting intensities and angles. The obtained results show the proposed method that the maximum recognition achieved in a space of 360 dimensional PCA is about 97.5 percent, and detection speed is equal to 2.55 milliseconds that is very impressive compared to the high volume of used database. پرونده مقاله
      • دسترسی آزاد مقاله

        74 - The reduction coefficient of PID controller by using PSO algorithm method for Flexible single-arm robot system
        Mohammad Mehdi Moradi
        This study on the design of PID controllers for flexible single-arm robot system optimizationPSO method is focused so that the coefficients of the PID controller are reduced. In this study,PID controller and PSO algorithm have been described and then by using MATLAB, PI چکیده کامل
        This study on the design of PID controllers for flexible single-arm robot system optimizationPSO method is focused so that the coefficients of the PID controller are reduced. In this study,PID controller and PSO algorithm have been described and then by using MATLAB, PIDcontrol was simulated. Then by PSO algorithm, attempts to reduce the PID coefficients are givenby simulation. Finally PID coefficients' values were compared with and without the PSOalgorithm. The results showed that by using the number of birds and birds number steps, bothequal to 30 (the sixth), the lowest values of the coefficients p K , d K , i K are 0.741, 0.1491and0, respectively. پرونده مقاله
      • دسترسی آزاد مقاله

        75 - A Method for Multi-text Summarization Based on Multi-Objective Optimization use Imperialist Competitive Algorithm
        Amir Shahab Shahabi Mohammad Reza Kangavari Amir Masoud Rahmani
        In this research, we discuss the methods that have been proposed so far to solve automatic summarization, in which both single-text and multi-text are summarized with emphasis on experimental methods and text extraction techniques. In multi-text summarization, retrievin چکیده کامل
        In this research, we discuss the methods that have been proposed so far to solve automatic summarization, in which both single-text and multi-text are summarized with emphasis on experimental methods and text extraction techniques. In multi-text summarization, retrieving redundant information that is readable and coherent and contains maximum information from the original text and minimum redundancy has made research in this field very important. An extraction approach based on several methods for identifying sentence similarities and a meta-heuristic optimization algorithm that has been modified and optimized for faster convergence is presented. In this algorithm, changes are made based on density detection through the probability distribution function to avoid being placed in local optimization and try to search more extensively for the response space. The experimental results obtained from the implementation of the algorithm show that the efficiency on criteria such as ROUGE and the accuracy of the proposed method is effectively increased. پرونده مقاله
      • دسترسی آزاد مقاله

        76 - Optimizing a Fuzzy Green p-hub Centre Problem Using Opposition Biogeography Based Optimization
        Marzieh Karimi Seyed Hamid Reza Pasandideh
        Hub networks have always been acriticalissue in locating health facilities. Recently, a study has been investigated by Cocking et al. (2006)in Nouna health district in Burkina Faso, Africa, with a population of approximately 275,000 people living in 290 villages served چکیده کامل
        Hub networks have always been acriticalissue in locating health facilities. Recently, a study has been investigated by Cocking et al. (2006)in Nouna health district in Burkina Faso, Africa, with a population of approximately 275,000 people living in 290 villages served by 23 health facilities. The travel times of the population to health services become extremely high during the rainy season, since many roads are unusable. In this regard, for many people, travelling to a health facility is a deterrent to seeking proper medical care. Furthermore, in real applications of hub networks, the travel times may vary due to traffic, climate conditions, and land or road type.To handle this challenge this paper considers the travel times are assumed to be characterized by trapezoidal fuzzy variables in order to present a fuzzy green capacitated single allocation p-hub center system (FGCSApHCP) with uncertain information. The proposed FGCSApHCP is redefined into its equivalent parametric integer nonlinear programming problem using credibility constraints. The aim is to determine the location of pcapacitated hubs and the allocation of center nodes to them in order to minimize the maximum travel time in a hub-and-center network in such uncertain environment. As the FGCSApHCP is NP-hard, a novel algorithmcalledoppositionbiogeography based optimizationis developed to solve that. This algorithm utilizes a binary oppositionbased learning mechanism to generate a diversity mechanism. At the end, both the applicability of the proposed approach and the solution methodologies are demonstrated using GAMS/BARON Software under severalkind of problems. Sensitivity analyses on the number of hubs and center nodes are conducted toprovide more insights as well. پرونده مقاله
      • دسترسی آزاد مقاله

        77 - An Ant Colony approach to forward-reverse logistics network design under demand certainty
        hamed Soleimani Mostafa Zohal
        Forward-reverse logistics network has remained a subject of intensive research over the past few years. It is of significant importance to be issued in a supply chain because it affects responsiveness of supply chains. In real world, problems are needed to be formulated چکیده کامل
        Forward-reverse logistics network has remained a subject of intensive research over the past few years. It is of significant importance to be issued in a supply chain because it affects responsiveness of supply chains. In real world, problems are needed to be formulated. These problems usually involve objectives such as cost, quality, and customers' responsiveness and so on. To this reason, we have studied a single-objective model for an integrated forward/reverse logistics network design. This model includes seven echelons; four echelons in the forward direction and three in the reverse direction. We present an effective algorithm based on ant colony optimization for this NP-hard problems to maximize the benefit. The proposed metaheuristic algorithm is a new approach in the field of closed-loop supply chain network design. Furthermore, the developed model is a three-objective one which regards incomes, costs, and the emissions of CO2. A new approach is utilized in order to integrate three various-dimension objective functions. The performance of the proposed algorithm has been compared utilizing the optimum solutions of the LINGO software. Besides, various instances with small, medium, and large sizes are generated and solved so as to make the evaluation of the algorithm reliable. The obtaining results clearly demonstrate superiority performance of the proposed algorithm. پرونده مقاله
      • دسترسی آزاد مقاله

        78 - A mathematical programming model for single round-robin tournament problem: A case study of Volleyball Nations League
        Hamed Jafari Morteza Rajabzadeh
        In this study, a mathematical programming model is developed for a single round-robin tournament problem to provide a schedule for the preliminary round of the Volleyball Nations League. In this setting, the aim is to assign the teams to the pools at each week as well a چکیده کامل
        In this study, a mathematical programming model is developed for a single round-robin tournament problem to provide a schedule for the preliminary round of the Volleyball Nations League. In this setting, the aim is to assign the teams to the pools at each week as well as to specify the host teams of the pools. This schedule is obtained by minimizing the sum of the differences between the total distance traveled by every team and the average of the total distances traveled by all teams. Then, to evaluate the performance of the developed model, it is applied to obtain the optimal schedule for the preliminary round of the Volleyball Men’s Nations League in year 2018. The results indicate that the sum of the travel distance deviations from the average of the total travel distances of all teams obtained from the schedule provided by the mathematical model is significantly lower than that calculated from the schedule presented by the International Volleyball Federation. Moreover, the schedule presented by the International Volleyball Federation leads to a percentage gap of 449.92% in comparison with the optimal schedule provided by the developed model. پرونده مقاله
      • دسترسی آزاد مقاله

        79 - Building a Multi-Objective Model for Multi-Product Multi-Period Production Planning with Controllable Processing Times: A Real Case Problem
        Mir Bahadorgholi Aryanezhad Mehdi Karimi-Nasab Seyed Mohammad Taghi Fatemi Ghomi
        Model building is a fragile and complex process especially in the context of real cases. Each real case problem has its own characteristics with new concepts and conditions. A correct model should have some essential characteristics such as: being compatible with real c چکیده کامل
        Model building is a fragile and complex process especially in the context of real cases. Each real case problem has its own characteristics with new concepts and conditions. A correct model should have some essential characteristics such as: being compatible with real conditions, being of sufficient accuracy, being logically traceable and etc. This paper discusses how to build an efficient model for a real case production planning problem. This process is reinforced by providing the proofs confirming the special characteristics of the final model such as proving its NP-Completeness. Also, the extremes of both objective functions – production smoothing versus cost minimizing – are calculated analytically. Finally, the case study and its solution methods are discussed briefly. پرونده مقاله
      • دسترسی آزاد مقاله

        80 - A Hybrid Meta-Heuristic Method to Optimize Bi-Objective Single Period Newsboy Problem with Fuzzy Cost and Incremental Discount
        Ata Allah Taleizadeh Seyed Taghi Akhavan Niaki
        In this paper the real-world occurrence of the multiple-product multiple-constraint single period newsboy problem with two objectives, in which there is incremental discounts on the purchasing prices, is investigated. The constraints are the warehouse capacity and the b چکیده کامل
        In this paper the real-world occurrence of the multiple-product multiple-constraint single period newsboy problem with two objectives, in which there is incremental discounts on the purchasing prices, is investigated. The constraints are the warehouse capacity and the batch forms of the order placements. The first objective of this problem is to find the order quantities such that the expected profit is maximized and the second objective is maximizing the service rate. It is assumed that holding and shortage costs, modeled by a quadratic function, occur at the end of the period, and that the decision variables are integer. A formulation to the problem is presented and shown to be an integer nonlinear programming model. Finally, an efficient hybrid algorithm of harmony search, goal programming, and fuzzy simulation is provided to solve the model. The results are illustrated by a numerical example. پرونده مقاله
      • دسترسی آزاد مقاله

        81 - A New Algorithm for the Discrete Shortest Path Problem in a Network Based on Ideal Fuzzy Sets
        Sadollah Ebrahimnejad Seyed Meysam Mousavi Behnam Vahdani
        A shortest path problem is a practical issue in networks for real-world situations. This paper addresses the fuzzy shortest path (FSP) problem to obtain the best fuzzy path among fuzzy paths sets. For this purpose, a new efficient algorithm is introduced based on a new چکیده کامل
        A shortest path problem is a practical issue in networks for real-world situations. This paper addresses the fuzzy shortest path (FSP) problem to obtain the best fuzzy path among fuzzy paths sets. For this purpose, a new efficient algorithm is introduced based on a new definition of ideal fuzzy sets (IFSs) in order to determine the fuzzy shortest path. Moreover, this algorithm is developed for a fuzzy network problem including three criteria, namely time, cost and quality risk. Several numerical examples are provided and experimental results are then compared against the fuzzy minimum algorithm with reference to the multi-labeling algorithm based on the similarity degree in order to demonstrate the suitability of the proposed algorithm. The computational results and statistical analyses indicate that the proposed algorithm performs well compared to the fuzzy minimum algorithm. پرونده مقاله
      • دسترسی آزاد مقاله

        82 - A Simulated Annealing Algorithm within the Variable Neighbourhood Search Framework to Solve the Capacitated Facility Location-AllocationProblem
        Ragheb Rahmaniani abdosalam Ghaderi Mohammad Saidi Mehrabad
        In this study, we discuss the capacitated facility location-allocation problem with uncertain parameters in which the uncertainty ischaracterized by given finite numbers of scenarios. In this model, the objective function minimizes the total expected costs oftransportat چکیده کامل
        In this study, we discuss the capacitated facility location-allocation problem with uncertain parameters in which the uncertainty ischaracterized by given finite numbers of scenarios. In this model, the objective function minimizes the total expected costs oftransportation and opening facilities subject to the robustness constraint. To tackle the problem efficiently and effectively, an efficienthybrid solution algorithm based on several meta-heuristics and an exact algorithm is put forward. This algorithm generates neighborhoodsby combining the main concepts of variable neighborhood search, simulated annealing, and tabu search and finds the local optima by usingan algorithm that uses an exact method in its framework. Finally, to test the algorithms’ performance, we apply numerical experiments onboth randomly generated and standard test problems. Computational experiments show that our algorithm is more effective and efficient interm of CPU time and solutions quality in comparison with CPLEX solver. پرونده مقاله
      • دسترسی آزاد مقاله

        83 - New Heuristic Algorithms for Solving Single-Vehicle and Multi-VehicleGeneralized Traveling Salesman Problems (GTSP)
        Ellips Masehian
        Among numerous NP-hard problems, the Traveling Salesman Problem (TSP) has been one of the most explored, yet unknown one. Even a minor modification changes the problem’s status, calling for a different solution. The Generalized Traveling Salesman Problem (GTSP)expands چکیده کامل
        Among numerous NP-hard problems, the Traveling Salesman Problem (TSP) has been one of the most explored, yet unknown one. Even a minor modification changes the problem’s status, calling for a different solution. The Generalized Traveling Salesman Problem (GTSP)expands the TSP to a much more complicated form, replacing single nodes with a group or cluster of nodes, where the objective is to find a minimum-length tour containing exactly one node from each cluster. In this paper, a new heuristic method is presented for solving singlevehicle single-depot GTSP with the ability of controlling the search strategy from conservative to greedy and vice versa. A variant algorithm is then developed to accommodate the multi-vehicle single-depot condition, which is modified afterwards to accommodate the multi-vehicle multi-depot GTSP. پرونده مقاله
      • دسترسی آزاد مقاله

        84 - اثربخشی آموزش پرما سلیگمن بر بهزیستی ذهنی، کیفیت و جهت‌گیری زندگی تک‌والد مادر
        آیدا جلائی پیمان یوسف زاده بیتا بهرامی
        هدف پژوهش حاضر بررسی اثربخشی آموزش مدل پرما سلیگمن بر بهزیستی ذهنی، کیفیت و جهت‌گیری زندگی تک‌والد مادر بود. روش تحقیق از نظر هدف کاربردی و به لحاظ روش گردآوری نیمه‌آزمایشی با طرح پیش‌آزمون و پس‌آزمون با گروه آزمایش و کنترل بود. جامعه آماری این تحقیق شامل تمامی زنان سرپ چکیده کامل
        هدف پژوهش حاضر بررسی اثربخشی آموزش مدل پرما سلیگمن بر بهزیستی ذهنی، کیفیت و جهت‌گیری زندگی تک‌والد مادر بود. روش تحقیق از نظر هدف کاربردی و به لحاظ روش گردآوری نیمه‌آزمایشی با طرح پیش‌آزمون و پس‌آزمون با گروه آزمایش و کنترل بود. جامعه آماری این تحقیق شامل تمامی زنان سرپرست خانوار (تک‌والد مادر که به دلیل طلاق، سرپرستی خانواده را بر عهده دارد) مراکز مشاوره منطقه 5 شهر تهران در سال 1399 بود. نمونه پژوهش شامل 36 تک‌والد مادر بود که به شیوه در دسترس گزینش شد و به‌صورت تصادفی در دو گروه آزمایش (18 نفر) و کنترل (18 نفر) همتا شد. ابزار پژوهش شامل پرسشنامه‌های بهزیستی ذهنی (کییز و ماگیارمو، 2003)، فرم کوتاه کیفیت زندگی سازمان بهداشت جهانی (1994) و جهت‌گیری زندگی (شییر و کارور، 1994) بود. آزمودنی‌های گروه آزمایش طی 10‌ جلسه 90‌ دقیقه‌ای تحت برنامه آموزش مدل پرما قرار گرفتند ولی گروه کنترل هیچ آموزشی دریافت نکردند. تجزیه‌وتحلیل داده‌ها با استفاده از آزمون کوواریانس و نرم‌افزار SPSS انجام گرفت. نتایج پژوهش نشان داد که آموزش مدل پرما بر بهزیستی ذهنی، کیفیت زندگی و جهت‌گیری زندگی تک‌والد مادر تأثیر دارد. بنابراین می‌توان استنباط کرد که آموزش مدل پرما، بهزیستی ذهنی تک‌والد مادر را افزایش داده، کیفیت زندگی و جهت‌گیری زندگی آنان را بهبود بخشیده است. ازاین‌رو با توجه به نتایج فوق می‌توان نتیجه گرفت که تمرینات پرما با تأکید و تمرکز بر پنج مؤلفه هیجانات مثبت، مجذوبیت، معنا، روابط مثبت و دستاورد بر مؤلفه‌های مزبور مؤثر واقع گردیده است.. پرونده مقاله
      • دسترسی آزاد مقاله

        85 - مقایسه اثربخشی مداخله مثبت نگر گروهی/فردی بر افسردگی مداوم دختران نوجوان بی سرپرست/بد سرپرست
        فروغ عبیری بناب مرضیه علیوندی وفا علی خادمی غلامحسین جوانمرد
        پژوهش حاضر با هدف مقایسه اثربخشی مداخله مثبت نگر به شکل گروهی و فردی بر افسردگی مداوم دختران نوجوان بی سرپرست/بدسرپرست تحت حمایت بهزیستی و کمیته امداد انجام شد. جامعه ی آماری پژوهش را کلیه ی دختران بدسرپرست/بی سرپرست تحت پوشش بهزیستی و کمیته امداد تشکیل می داد که د چکیده کامل
        پژوهش حاضر با هدف مقایسه اثربخشی مداخله مثبت نگر به شکل گروهی و فردی بر افسردگی مداوم دختران نوجوان بی سرپرست/بدسرپرست تحت حمایت بهزیستی و کمیته امداد انجام شد. جامعه ی آماری پژوهش را کلیه ی دختران بدسرپرست/بی سرپرست تحت پوشش بهزیستی و کمیته امداد تشکیل می داد که در سال 1398 تحت پوشش نهادهای حمایتی مذکور بودند. روش نمونه گیری به این صورت بود که 45 نفر از افراد جامعه به شکل نمونه گیری هدفمند انتخاب شده و بطور تصادفی در سه گروه فردی (15نفر)، گروهی (15 نفر) و گواه (15 نفر) قرار گرفتند. در فرآیند مداخله، گروه های آزمایشی (فردی و گروهی) بسته ی مداخله ای روان درمانی مثبت گرای سلیگمن و سیکسزنت میهالی (47) را دریافت کردند؛ درحالی که گروه کنترل هیچ مداخله ای دریافت نکرد. داده های پژوهش با استفاده از پرسشنامه ی افسردگی بک جمع آوری شده و در پایان داده های حاصل با آزمون آماری تحلیل واریانس یک راهه، بواسطه ی نسخه 25 SPSS تجزیه و تحلیل شدند. نتایج حاصل از تحلیل نشان داد که مداخله ی مثبت نگر به شکل فردی در مقایسه با روش گروهی اثربخشی بیشتری در کاهش افسردگی مداوم داشته است (01/0P<). در نتیجه می توان گفت که درمان مثبت نگر فردی می تواند به عنوان روشی برای کاهش افسردگی دختران بدسرپرست/بی سرپرست از سوی نهادهای حمایتی مورد استفاده قرار گیرد. پرونده مقاله
      • دسترسی آزاد مقاله

        86 - رابطه ی عملکرد روغن و دانه با صفات مورفولوژیک در هیبریدهای سینگل‌کراس آفتابگردان
        علیرضا تاری نژاد پریسا رمضانی ورهرام رشیدی مهدی غفاری
        عملکرد دانه و روغن آفتابگردان صفات کمی هستند که نتیجه ی توام صفات زیادی در گیاه می‌باشند، به‌همین دلیل ارزیابی صفات مختلف و روابط بین آن ها دارای اهمّیت خاصی است. صفات مهم زراعی و ارتباط بین آن ها در 16 هیبرید سینگل کراس آفتابگردان بر اساس یک طرح پایه ی بلوک‌های کامل چکیده کامل
        عملکرد دانه و روغن آفتابگردان صفات کمی هستند که نتیجه ی توام صفات زیادی در گیاه می‌باشند، به‌همین دلیل ارزیابی صفات مختلف و روابط بین آن ها دارای اهمّیت خاصی است. صفات مهم زراعی و ارتباط بین آن ها در 16 هیبرید سینگل کراس آفتابگردان بر اساس یک طرح پایه ی بلوک‌های کامل تصادفی با سه تکرار در ایستگاه تحقیقاتی دانشگاه آزاد اسلامی واحد تبریز در سال زراعی 1387 مورد بررسی قرار گرفت. بین هیبریدهای مورد بررسی از نظر تمامی صفات به غیر از نسبت مغز به کل دانه و وزن طبق خالی حداقل در سطح احتمال 5% اختلاف معنی‌داری وجود داشت. همچنین، مقایسه میانگین با آزمون چند دامنه‌ای دانکن بین هیبریدها نشان داد که با در نظر گرفتن مهم‌ترین صفات یعنی عملکرد دانه و روغن و همچنین سایر خصوصیات زراعی از قبیل وزن صد دانه، قطر طبق، قطر ساقه، تعداد دانه در طبق، روز تا گلدهی، تعداد برگ هیبریدهای شماره ی 8 (R2× CMS322) و 13 (R56× CMS346) قابلیت قرارگیری در آزمایش‌های سازگاری نهایی جهت کشت در منطقه را دارا می‌باشند. همبستگی ساده صفات نیز نشان داد که بین عملکرد دانه و صفات مهمی از قبیل روز تا رسیدگی فیزیولوژیک، قطر ساقه، قطر طبق، تعداد دانه در طبق و تعداد دانه ی پر در طبق حداقل در سطح احتمال 5% همبستگی مثبت و معنی‌داری وجود دارد. پرونده مقاله
      • دسترسی آزاد مقاله

        87 - بررسی جامعه‌شناختی نگرش جوانان مجرد به مسئله ازدواج موقّت: ارائه یک نظریه مبنایی
        بهنام بشیری خطیبی فیروز راد علی باصری نوروز هاشم زهی
        موضوع ازدواج موقت همواره یکی از چالش‌ها و ابهامات حوزه تشکیل خانواده بوده است. علی‌رغم این یکی از راه حل‌های شرعی و قانونی در کشور ماست تا برای افرادی که شرایط و امکانات ازدواج دائم برایشان میسر نیست، نیازها و خواسته‌های خود را برآورده سازند. هدف پژوهش حاضر مطالعه جامعه چکیده کامل
        موضوع ازدواج موقت همواره یکی از چالش‌ها و ابهامات حوزه تشکیل خانواده بوده است. علی‌رغم این یکی از راه حل‌های شرعی و قانونی در کشور ماست تا برای افرادی که شرایط و امکانات ازدواج دائم برایشان میسر نیست، نیازها و خواسته‌های خود را برآورده سازند. هدف پژوهش حاضر مطالعه جامعه‌شناختی ازدواج موقت از منظر دانشجویان مجرد است. روش تحقیق حاضر کیفی- نظریه مبنایی است و از نظر نوع تحقیق نیز پژوهشی کاربردی است. مشارکت‌کنندگان در پژوهش شامل جوانان مجرد دانشگاه آزاد اسلامی واحد علوم و تحقیقات تهران در سال تحصیلی 1398-1397 بودند که از میان آنها با روش نمونه‌گیری هدفمند تا حصول اشباع نظری با 17 نفر مصاحبه‌های عمیق و نیمه ساختاریافته انجام گرفت. بعد از اتمام فرایند تحلیل، برای اعتبار یافته‌ها از استراتژی بازبینی مجدد محقق و همکاران و اساتید صاحب‌نظر استفاده شد. همچنین نتایج و تمام مراحل انجام شده در اختیار برخی از مشارکت‌کنندگان در تحقیق داده شد تا به نقد و ارائه نظرات بپردازنند. تحلیل یافته‌ها به شکل گیری 49 مفهوم اولیه که بعد از تعدیل و تقلیل مفاهیم مشابه و یکسان در نهایت 20 مفهوم در 6 مضمون محوری (بعد قانونی، حقوقی، هویتی و شخصیتی، بعد انگیزشی، غریزی و در نهایت بعد شک اندازی مداوم) منجر شدند. بر اساس مقولات محوری، هسته اصلی پژوهش "نگرش و باورداشت دانشجویان به ازدواج موقت" که از جنبه انتزاع و جامعیت بالاتر برخوردار بود، شکل گرفت. پرونده مقاله
      • دسترسی آزاد مقاله

        88 - مطالعه رابطه بین نوع و میزان تماشای سریال‌های ترکی زبان اصلی و سبک زندگی دانشجویان دختر مجرد 20 الی 25 سال دانشگاه آزاد اسلامی واحد ارومیه
        وحیده ترزمی‌نژاد راضیه سفیدگر
        هدف پژوهش حاضر، مطالعه رابطه بین نوع (ژانر) و میزان تماشای سریال های ترکی زبان اصلی ماهواره و سبک زندگی می باشد. روش پژوهش، پیمایشی ازنوع تحلیلی است. جامعه آماری این پژوهش، دانشجویان دختر دانشگاه آزاد اسلامی واحد ارومیه در نیمسال اول تحصیلی 95- 1394 می باشد که حجم نمونه چکیده کامل
        هدف پژوهش حاضر، مطالعه رابطه بین نوع (ژانر) و میزان تماشای سریال های ترکی زبان اصلی ماهواره و سبک زندگی می باشد. روش پژوهش، پیمایشی ازنوع تحلیلی است. جامعه آماری این پژوهش، دانشجویان دختر دانشگاه آزاد اسلامی واحد ارومیه در نیمسال اول تحصیلی 95- 1394 می باشد که حجم نمونه آن با استفاده از فرمول کوکران، تعداد 362 نفر تعیین شده، ابزار گردآوری اطلاعات، پرسشنامه است که بر اساس چهارچوب نظری توسط محقق طراحی شده است. داده ها از طریق نرم افزار spss تجزیه و تحلیل شده اند. چارچوب نظری تحقیق برمبنای نظریات "تاثیر پذیری مخاطب از رسانه" هم چون نظریه کاشت، نظریه وابستگی مخاطب، نظریه انتظارات اجتماعی و نظریات سبک زندگی بوردیو و گیدنز استوار است. یافته های پژوهش نشان داد، به طور کل اکثریت دختران پاسخگو (4/56 درصد) ادعا داشته‌اند، میزان تاثیرگذاری سریال های ترکی زبان بر سبک زندگی شان درحد کم می باشد. هم چنین مهم ترین نتایج حاکی ازآن است که بین میزان تماشای سریال های ترکی زبان اصلی و سبک زندگی آن ها رابطه معناداری وجود دارد و بین نوع سریال های ترکی زبان اصلی و سبک زندگی، سبک گذراندن اوقات فراغت، نحوه پوشش (مدگرایی)، روابط میان فردی و گرایش های مذهبی دانشجویان رابطه وجود دارد و بین نوع سریال های ترکی زبان اصلی و میزان مصرف - گرایی دانشجویان دختر مجرد رابطه معناداری وجود ندارد. پرونده مقاله
      • دسترسی آزاد مقاله

        89 - سناریونگاری نظم آینده بین الملل در سال های منتهی به 2030 میلادی
        علی اصغر نعیمی امیر هوشنگ میرکوشش علی محمدزاده
        از گذشته، پیش بینی آینده و این که نظام جهانی با توجه به متغیرهای گوناگون آن، چه سمت و سویی خواهد داشت و بازیگران سیاسی و دولتمردان حاکم در راستای تامین منافع ملی و صیانت و حفاظت از استقلال و تمامیت ارضی خود به دنبال چه کنش یا واکنش هایی خواهند بود، همیشه به عنوان یک دغد چکیده کامل
        از گذشته، پیش بینی آینده و این که نظام جهانی با توجه به متغیرهای گوناگون آن، چه سمت و سویی خواهد داشت و بازیگران سیاسی و دولتمردان حاکم در راستای تامین منافع ملی و صیانت و حفاظت از استقلال و تمامیت ارضی خود به دنبال چه کنش یا واکنش هایی خواهند بود، همیشه به عنوان یک دغدغه و مسئله مطرح بوده و هست. بنابراین بازیگران عرصه بین الملل که همان کشورهای سیاسی می باشند، در جهت احقاق حقوق شهروندی شهروندان خود با سایر بازیگران به رقابت پرداخته و نوعی ستیز و مقابله نانوشته را دنبال می نمایند. لذا با عنایت به تلاش برخی کنشگران موثر از جمله چین، روسیه و اتحادیه اروپا برای شکل دهی به نظم حاکم بر عرصه بین الملل و یا تغییر و دگرگونی در آن، نگارنده را بر آن داشته تا با طرح چند سناریو، آینده نظم بین الملل در سال های منتهی به 2030 میلادی را با استفاده از روش سناریو پردازی در چارچوب نظری واقعگرایی، علت کاوی نماید. از این رو می توان پیش بینی کرد با عنایت به رشد فزاینده اقتصادی، نظامی، فضایی و سیاسی چین، در کنار رویکرد تهاجمی روسیه و ملی‌گرایی روز افزون اتحادیه اروپا، در پایان دهه سوم قرن بیست و یک میلادی ما نه تنها شاهد تنش ها و تغییراتی در نظم بین الملل خواهیم بود، بلکه نظام حاکم نیز از شکل و صورت کنونی خود که تک قطبی بوده به سوی یک نظام تک – چند قطبی با محوریت آمریکا و چند کانون تاثیرگذار از جمله چین، روسیه و اتحادیه اروپا تغییر مسیر خواهد داد. پرونده مقاله
      • دسترسی آزاد مقاله

        90 - قواعد حاکم بر تداخل دیات در حقوق ایران و فقه اسلام
        سیامک جعفرزاده ام البنین اله مرادی
        در قانون جدید مجازات برای هر جنایت غیرعمدی یا در مواردی عمدی، دیه تعیین‌شده است ولی با تعدد جنایت‌های وارده دیه آن نیز متعدد می‌شود یا برای همه جنایت‌ها یک دیه پرداخت می‌شود؟ در تداخل دیات، دیه آسیب کوچک‌تر در آسیب بزرگ‌تر، وارد می‌شود و برابر قانون مجازات اسلامی در تعد چکیده کامل
        در قانون جدید مجازات برای هر جنایت غیرعمدی یا در مواردی عمدی، دیه تعیین‌شده است ولی با تعدد جنایت‌های وارده دیه آن نیز متعدد می‌شود یا برای همه جنایت‌ها یک دیه پرداخت می‌شود؟ در تداخل دیات، دیه آسیب کوچک‌تر در آسیب بزرگ‌تر، وارد می‌شود و برابر قانون مجازات اسلامی در تعدد جنایات اصل بر تعدد دیات است و تداخل امری استثنایی تلقی شده است. در این قانون مواد معدودی به تداخل دیات مرتبط بوده عمدتاً از تحریرالوسیله امام خمینی (ره) اقتباس گردیده است در موارد نادری تداخل ارش در دیه و دیه در ارش از سوی قانون‌گذار پذیرفته‌شده است. با توجه به مسائل اختلافی موجود در خصوص تداخل دیات و اختصاص موادی از قانون مجازات اسلامی مصوب 1392 به این موضوع؛ پس از بررسی صور گوناگون تداخل یا عدم تداخل دیات، بر اساس قانون و فتاوی معتبر فقهی شیعه و سنی، در این تحقیق با روش تحلیلی و توصیفی، تلاش شده به زوایای مبهم قانون اشاره‌کرده و نتایج و یافته‌های تحقیق نشان می‌دهد که قانون‌گذار در ماده 543 قانون مجازات اسلامی مصوب 1392، شرایط تداخل را در انجام شدن آسیب‌ها با یک رفتار و وقوع آن‌ها در یک عضو و همچنین واحد واقعی یا عرفی بودن آسیب‌های متعدد، منحصر کرده و تمام شرایط مذکور را برای تداخل لازم دانسته است و قانون در تداخل منافع چنانچه منفعت قائم به عضو باشد و براثر جنایت بر عضو زایل شود تداخل منفعت در عضو را جاری دانسته است و صور دیگری از تداخل نیز وجود دارد که در قانون ذکر نشده است. پرونده مقاله
      • دسترسی آزاد مقاله

        91 - استخراج و پیش تغلیظ مس و نقره از نمونه‌های غذایی و آبی با روش میکرو استخراج فاز مایع بر پایه تک قطره با بکارگیری مایع یونی بعنوان حلال استخراج کننده و اندازه‌گیری با دستگاه جذب اتمی الکتروترمال
        جعفر ابوالحسنی محمد امجدی
        یک روش جدید میکرو استخراج تک قطره بر اساس مایعات یونی برای پیش تغلیظ مس و نقره در مقادیر بسیار کم و اندازه‌گیری با دستگاه جذب اتمی الکتروترمال ،ETAAS، توسعه یافته است. 8 میکرولیتر از مایع یونی 1- هگزیل 3- متیل ایمیدازولیوم هگزا فلورو فسفات،[C6MIM][PF6]، برای استخراج مس چکیده کامل
        یک روش جدید میکرو استخراج تک قطره بر اساس مایعات یونی برای پیش تغلیظ مس و نقره در مقادیر بسیار کم و اندازه‌گیری با دستگاه جذب اتمی الکتروترمال ،ETAAS، توسعه یافته است. 8 میکرولیتر از مایع یونی 1- هگزیل 3- متیل ایمیدازولیوم هگزا فلورو فسفات،[C6MIM][PF6]، برای استخراج مس و نقره بصورت کمپلکس با دی تیزون استفاده شده است. متغییرهای حائز اهمیت که بازده میکرواستخراج و سیگنال جذب اتمی الکتروترمال را تحت تأثیر قرار می‌دهند از قبیل دمای پیرولیز و دمای اتمیزاسیون، غلظت دی تیزون، زمان استخراج، حجم قطره و سرعت بهم زدن مورد بررسی و بهینه شدند. در شرایط بهینه آزمایشی، حد تشخیص روش (با سه برابر انحراف استاندارد) به ترتیب 4 و 8 نانوگرم بر لیتر و انحراف استاندارد نسبی (با غلظت 1/0 میکروگرم بر لیتر و 6 بار تکرار 2/4 و 8/4 درصد) برای نقره و مس بدست آمد. روش توسعه یافته بطور موفقیت‌آمیزی برای اندازه‌گیری مس و نقره در نمونه‌های غذایی و آبی بکار برده شد. پرونده مقاله
      • دسترسی آزاد مقاله

        92 - چارچوبی برای سیاستگذاریِ تغییرات ساختار ستاد در سازمان های مادرِ در ونزا (مورد مطالعه یک شرکت پتروشیمی)
        حسین حاجی بیگلو مهدی حقیقی کفاش نادر مظلومی وجه الله قربانی زاده
        ساختارسازمان مادر، به عنوان مغز و مرکز فرماندهی بنگاه های چند کسب وکاره، با هدف دستیابی به مزیت مادری، در حال تغییر مداوم است. مدیریت بهینه پویایی های ساختاری سازمان مادر، می تواند اثری شگرف بر بهره وری داشته باشد. بررسی پیکره دانش موجود در این حوزه، خلأ دسترسی به چارچو چکیده کامل
        ساختارسازمان مادر، به عنوان مغز و مرکز فرماندهی بنگاه های چند کسب وکاره، با هدف دستیابی به مزیت مادری، در حال تغییر مداوم است. مدیریت بهینه پویایی های ساختاری سازمان مادر، می تواند اثری شگرف بر بهره وری داشته باشد. بررسی پیکره دانش موجود در این حوزه، خلأ دسترسی به چارچوبی مشخص، برای مدیریت تغییرات ساختاری سازمان های مادر را نشان می دهد. پژوهش حاضر با هدف پر کردن این خلأ پژوهشی و با رویکردی کیفی مبتنی بر مطالعه موردی(تک موردی) تلاش می کند تا چارچوبی برای سیاستگذاری تغییرات ساختار سازمان مادر به دست دهد. در گام اول، با مطالعه مبانی نظری مرتبط، تعریفی مشخص و کاربردی از ساختار سازمان مادر به دست داده شده است. بر اساس تعریف فوق و هدف پژوهش، پرسش های مرتبط در قالب پرسش نامه تدوین و در یکی از بنگاه های چند کسب و کاره- فعال در حوزه پتروشیمی- داده های مرتبط از طریق مصاحبه و مطالعه اسناد، گردآوری و با استفاده از روش تحلیل تم، تحلیل شده است. الزامات محیطی، تغییرات بنیادین، ارکان جهت ساز، سبک مدیریت و مادری و منحنی بلوغ سازمان مادر به عنوان مهم ترین عوامل مؤثر بر سیاستگذاری تغییرات سازمان مادر شناخته شدند. چالش های مرتبط با هر یک از عوامل فوق همراه با راهکارهای پیشنهادی برای تطابق با آنها به تفصیل بررسی شده است.در نهایت چارچوب نهایی عوامل مؤثر بر سیاستگذاری تغییرات ساختار ستاد در سازمان مادر به دست داده شده است. پرونده مقاله
      • دسترسی آزاد مقاله

        93 - A Study on the Attitude of Unmarried Male Students of Ferdowsi University toward Marriage and its Affecting Factors
        Ali Akbar Majdi Omid Rezaei
        Iran's young population structure has been highlighted the importance of addressing youth issues more than ever. Marriage is one of the stages that youth pass in their life. Today, marriage has become a major concern of young people that review and understanding of this چکیده کامل
        Iran's young population structure has been highlighted the importance of addressing youth issues more than ever. Marriage is one of the stages that youth pass in their life. Today, marriage has become a major concern of young people that review and understanding of this area is considered as one of the tasks of social researchers. This study aimed to measure the attitude of unmarried male students of Ferdowsi university toward marriage and factors affecting it. The method is survey and used instrument used here is the questionnaire. The statistical population is all of single male students at Ferdowsi university of Mashhad in 2010-11. Through random sampling 200 subjects who were selected. The results show that several variables including attitudes to women, life satisfaction, parents' relationships with each other and friends' attitudes about marriage influence the attitude towards marriage. پرونده مقاله
      • دسترسی آزاد مقاله

        94 - جلوه‌های ادب غنایی در تک‌بیت‌های سبک هندی (بر اساس اشعار صائب تبریزی، بیدل دهلوی، کلیم کاشانی و فیضی دکنی)
        نفیسه نصیری علیرضا فولادی مرتضی رشیدی
        مضمون‌آفرینی‌های بدیع و تخیل گستردة شاعران سبک هندی، خالق زمینه‌های موضوعی فراوانی در آثار آن‌هاست. ساختار سیاسی، اجتماعی، فرهنگی و حتی مذهبی در دورة سبک هندی سبب بروز احساسات، عواطف شخصی و هیجانات درونی شاعران با خیالات دل‌انگیز در موضوعات مختلف در اشعار این دوره شد که چکیده کامل
        مضمون‌آفرینی‌های بدیع و تخیل گستردة شاعران سبک هندی، خالق زمینه‌های موضوعی فراوانی در آثار آن‌هاست. ساختار سیاسی، اجتماعی، فرهنگی و حتی مذهبی در دورة سبک هندی سبب بروز احساسات، عواطف شخصی و هیجانات درونی شاعران با خیالات دل‌انگیز در موضوعات مختلف در اشعار این دوره شد که مجموعه‌ای از انواع ادب غنایی را در آثار آنها بازتاب داده است. تک بیت یکی از اشکال بیان این مضامین است. دیوان شاعران این دوره شامل گسترده‌ترین مجموعه‌هایی است که در آن مسائل اخلاقی، عرفانی، عشق‌ورزی، مذهبی، تعلیمی و اجتماعی با مضمون‌های بدیع و تازه در قالب کوتاه تک‌بیت جلوه‌گری می‌کند و به طور کلی بسامد ادبیات غنایی نسبت به دیگر انواع ادبی در این قالب چشمگیرتر است. در این مقاله به غنایی بودن تک‌بیت‌های سبک هندی و تنوع مضامین غنایی پرداخته شده‌ و موضوعاتی همچون: عشق، عرفان، بث‌الشکوی، مرثیه، طنز، وطنیات و... در اشعار شاعران این دوره مورد بررسی قرار گرفته‌است. این پژوهش با روش توصیفی- تحلیلی انجام شده است و نتیجة پژوهش نشان می‌دهد که عشق مجازی، مصطلحات عرفانی، خودستایی شاعران و وطنیات بیشترین بسامد را در میان موضوعات موجود به خود اختصاص داده‌است. پرونده مقاله
      • دسترسی آزاد مقاله

        95 - Statistical Analysis and Optimization of Factors Affecting the Surface Roughness in UVaSPIF Process Using Response Surface Methodology
        Mehdi Vahdati Ramezanali Mahdavinejad Saeid Amini Mahmoud Moradi
        Ultrasonic vibration assisted single point incremental forming (UVaSPIF) is based on localized plastic deformation in a sheet metal blank. It consists to deform gradually and locally the sheet metal using vibrating hemispherical-head tool controlled by a CNC milling mac چکیده کامل
        Ultrasonic vibration assisted single point incremental forming (UVaSPIF) is based on localized plastic deformation in a sheet metal blank. It consists to deform gradually and locally the sheet metal using vibrating hemispherical-head tool controlled by a CNC milling machine. The ultrasonic excitation of forming tool reduces the vertical component of forming force. In addition, application of ultrasonic vibration reduces the surface roughness of the specimen. Surface roughness is one of the quantitative and qualitative parameters, which is used to assess the quality of the final product. In the present paper, a statistical analysis and optimization of effective factors on this parameter is performed in the UVaSPIF. For this purpose, response surface methodology (RSM) is selected as the experiment design technique. The controllable factors such as vertical step size, sheet thickness, tool diameter, wall inclination angle, and feed rate is specified as input variables of the process. The obtained results from analysis of variance (ANOVA) and regression analysis of experimental data confirm the accuracy of mathematical model. Furthermore, it is shown that the linear, quadratic, and interactional terms of the variables are effective on the surface roughness parameter. To optimize the surface roughness parameter, the finest conditions of the experiment are determined using desirability method, and statistical optimization is subsequently verified by conducting the confirmation test. پرونده مقاله
      • دسترسی آزاد مقاله

        96 - The Analysis of Coulomb Blockade in Fullerene Single Electron Transistor at Room Temperature
        Vahideh KhademHosseini Mohammad Taghi Ahmadi Saeid Afrang Razali Ismail
        The Graphene based single electron transistor (SET) as a coulomb blockade device need to be explored .It is a unique device for high-speed operation in a nano scale regime. A single electron transfers via the coulomb barriers, but its movement may be prevented by coulom چکیده کامل
        The Graphene based single electron transistor (SET) as a coulomb blockade device need to be explored .It is a unique device for high-speed operation in a nano scale regime. A single electron transfers via the coulomb barriers, but its movement may be prevented by coulomb blockade, so its effect is investigated in this research. The conditions of coulomb blockade and its controlling factors such as material, temperature, gate voltage and island length are investigated. At first, the coulomb blockade on fullerene SET as a nano transistor with new material is modeled and compared with experimental data of silicon SET. The comparison study indicates that the coulomb blockade range of fullerene SET is lower than the silicon one. On the other hand, the analysis demonstrates that, temperature and gate voltage play direct associations with zero current SET. In addition, island length and its material effect on coulomb blockade and desired current are achieved by decreasing the coulomb blockade range. پرونده مقاله
      • دسترسی آزاد مقاله

        97 - Molecular Dynamics Investigation of The Elastic Constants and Moduli of Single Walled Carbon Nanotubes
        Mohammad Mahdi Zaeri Saeed Ziaei-Rad
        Determination of the mechanical properties of carbon nanotubes is an essential step in their applications from macroscopic composites to nano-electro-mechanical systems. In this paper we report the results of a series of molecular dynamics simulations carried out to pre چکیده کامل
        Determination of the mechanical properties of carbon nanotubes is an essential step in their applications from macroscopic composites to nano-electro-mechanical systems. In this paper we report the results of a series of molecular dynamics simulations carried out to predict the elastic constants, i.e. the elements of the stiffness tensor, and the elastic moduli, namely the Young’s and shear moduli, of various single walled carbon nanotubes. Poisson’s ratios were also calculated. Three different methods were used to run the simulations: applying a predetermined strain and reading the resulted stress, applying forces and constraints to the end atoms and calculating the moduli by assuming an equivalent continuum tube, and lastly applying a predetermined stress and reading the consequent deformation. In each case, the effect of nanotube chirality and diameter was studied. In addition, loading conditions were altered in each method to study the effect of nonlinearity of interatomic interactions. The result of the three methods are compared, with each other as well as with the literature, and discussed to obtain reasonable concluding remarks. پرونده مقاله
      • دسترسی آزاد مقاله

        98 - Application of Task Complexity Along +/- single Task Dimension and its Effect on Fluency in Writing Performance of Iranian EFL Learners
        Siros Izadpanah Esmaeil Shajeri
        In the present study, two different models of task complexity; namely, limited attentional capacity model and cognition hypothesis were examined. To this end, the manipulation of cognitive task complexity along +/- single task dimension on Iranian EFL learners’ pr چکیده کامل
        In the present study, two different models of task complexity; namely, limited attentional capacity model and cognition hypothesis were examined. To this end, the manipulation of cognitive task complexity along +/- single task dimension on Iranian EFL learners’ production in terms of fluency was explored. Based on the results of the writing test of TOFEL (2004), 48 learners were selected as the participants of the study and were divided into two groups, simple task group (STG, n=24) and complex task group (CTG, n=24). The participants in the STG were given an eight-frame picture which had been arranged in the correct sequence before its administration (+ single task). The participants in the CTG were given all the eight frames which were not arranged in their correct order. These participants were required to order the frames in the right sequence first, before starting writing (- single task). Their output was encoded based on the measure of fluency. One independent sample t-tests was run. The results indicated that the participants significantly generated more words in the complex task. Based on the findings, it can be concluded that in the Iranian context, the predictions of limited attentional capacity model were more accurate. پرونده مقاله
      • دسترسی آزاد مقاله

        99 - Effect of Spaced Repetition on Iranian EFL Learners’ Form Recall of English Single Words and Collocations
        Bita Naderi Bahram Bagheri
        Acquiring vocabulary has always been recognized as a significant and challenging part of language learning process. In this study, the researcher examined the extent to which form recall of target lexical items by learners of English as a foreign language (EFL) is affec چکیده کامل
        Acquiring vocabulary has always been recognized as a significant and challenging part of language learning process. In this study, the researcher examined the extent to which form recall of target lexical items by learners of English as a foreign language (EFL) is affected by a) repetition and b) by the type of target item; single words versus collocations. The treatment consisted of non-communicative, (partly) decontextualized activities, in which the target items were taught and examined. For this purpose, 27 Iranian intermediate EFL learners were chosen and divided into two groups of A with 14 and B with 13 participants. In all activities, the participants had to supply the target items’ forms. Data were collected in a classroom setting in two groups, differing only in the type of target item. In class A, the research focused on single words and in class B the focus was on collocations. A pre and post test was administered to the participants before and after the treatment. The findings show a large effect of spaced repetition on form recall of single words and collocations. However, the participants in class A who were treated with single words outperformed the other group. پرونده مقاله
      • دسترسی آزاد مقاله

        100 - FTC of Three-phase Induction Motor Drives under Current Sensor Faults
        Azizollah Gholipour Mahmood Ghanbari Esmaeil Alibeiki Mohammad Jannati
        In this study, single-phase current sensor Fault-Tolerant Control (FTC) for Three-Phase Induction Motor (TPIM) drives using a flux observer is proposed. In the proposed FTC scheme, a 3rd difference operator executes the Fault Detection (FD) task and the reconstruction o چکیده کامل
        In this study, single-phase current sensor Fault-Tolerant Control (FTC) for Three-Phase Induction Motor (TPIM) drives using a flux observer is proposed. In the proposed FTC scheme, a 3rd difference operator executes the Fault Detection (FD) task and the reconstruction of the faulted current is achieved through a flux observer. The presented FTC system is able to switch TPIM drive systems from normal mode to the faulty mode suitably. The proposed method in this study can be utilized in many industries particularly in electric vehicles, medical devices, and aerospace where TPIM drive systems are needed to continue the desired operation even during fault situations. The effectiveness of the proposed FTC system is confirmed by experiments on a 0.75kW TPIM drive platform. پرونده مقاله
      • دسترسی آزاد مقاله

        101 - A Simple Strategy for DRFOC of 3-phase Induction Motors under Single-phase Open Fault
        Mohammad Shabandokht-Zarami Mahmood Ghanbari Esmaeil Alibeiki Mohammad Jannati
        This research investigates a simple method for Direct Rotor Field-Oriented Control (DRFOC) of star-connected 3-Phase Induction Motor (3Ph IM) drives under Single-Phase Open Fault (SPOF). The proposed control scheme includes a modified RFOC strategy in cooperation with a چکیده کامل
        This research investigates a simple method for Direct Rotor Field-Oriented Control (DRFOC) of star-connected 3-Phase Induction Motor (3Ph IM) drives under Single-Phase Open Fault (SPOF). The proposed control scheme includes a modified RFOC strategy in cooperation with a flux linkage observer. Most studies on this topic are intended for Indirect Rotor Field-Oriented Control (IRFOC), and hence are not appropriate at low speed operation due to using a pure integration for the flux angle calculation. To this end, a rotor flux linkage observer is designed which alleviates the speed and torque ripples of the faulty motor during low speed operation. The observer is capable of estimation of the rotor flux during healthy and SPOF conditions by only some modifications in the 3Ph IM parameters. The proposed DRFOC approach is tested under different conditions and the effectiveness of the proposed system is confirmed by experimental results. The results show the good fault tolerant capability and tracking performance of the proposed controller during different speeds. پرونده مقاله
      • دسترسی آزاد مقاله

        102 - A Review of Single Electron Transistors
        Yaghoob Mohammadmoradi Nader Javadifar Atila Skandarnezhad
        The single electron transistor (SET) is an effectual device to quantize current. It has been highly considered as the most fundamental single-electron device in the research field of nanotechnology. An electron from the single electron transistor (SET) is a pivotal elem چکیده کامل
        The single electron transistor (SET) is an effectual device to quantize current. It has been highly considered as the most fundamental single-electron device in the research field of nanotechnology. An electron from the single electron transistor (SET) is a pivotal element in the research field of nanotechnology. This type of transistor with very low power consumption and high-performance speed is considered as a nano-scaled switching device that can control the motion of a single electron. The principles of SET and some of its applications are discussed in this paper. In this research paper, we also focus on some basic device characteristics like ‘Coulomb blockade’, single electron tunneling effect & ‘Coulomb staircase’ on which this Single electron transistor [SET] works and the basic comparison of SET characteristics and also its [SET] advantages as well as disadvantages to make a clear picture about the reason behind its popularity in the field of nanoelectronics. پرونده مقاله
      • دسترسی آزاد مقاله

        103 - Multiple-input single-output nonlinear system identification using Bezier- Bernstein polynomials with noise cancellation
        Mohammad Jahani Moghaddam
        This article deals with an identification method for the fractional multiple-input single-output ‎model. It is considered the Hammerstein model to separate dynamic linear and static nonlinear ‎behaviors. Which Bezier-Bernstein polynomials are used to approximate the non چکیده کامل
        This article deals with an identification method for the fractional multiple-input single-output ‎model. It is considered the Hammerstein model to separate dynamic linear and static nonlinear ‎behaviors. Which Bezier-Bernstein polynomials are used to approximate the nonlinear functions ‎and the fractional order transfer function is applied to estimate the linear part. A hybrid ‎identification method based on a modified evolutionary algorithm and a recursive classic method ‎is presented. As an advantage, this method can also correctly identify the system in the presence ‎of output noise. A photovoltaic experimental system and a numerical example are used to ‎illustrate the efficiency and performance of the proposed scheme.‎ پرونده مقاله
      • دسترسی آزاد مقاله

        104 - SEPIC Converter Based Maximum Power Point Tracking of a Photovoltaic ‎System Using State-Space Feedback Controller
        Ahmad Moghassem Nader Javadifar
        In this paper, an intelligent control system using state-space feedback controller designed to track the maximum power radiation direction of the sun for a photovoltaic system in a varying direction environment will be studied. In fact, the study focuses on the ability چکیده کامل
        In this paper, an intelligent control system using state-space feedback controller designed to track the maximum power radiation direction of the sun for a photovoltaic system in a varying direction environment will be studied. In fact, the study focuses on the ability of using the state space feedback controller to control the power oscillation around the optimal point such that the power dissipation is minimized. Furthermore, the control system based on the instantaneous power tracking and with respect to the nonlinear photovoltaic cell makes feasible to access the maximum possible electric power using tiny changes in the Single Ended Primary Inductor Converter (SEPIC). پرونده مقاله
      • دسترسی آزاد مقاله

        105 - A Mixed Integer Nonlinear Programming for Facility Layout Problem with Maintenance Constraints
        Mehdy Morady Gohareh Ehsan Mansouri
        The facility layout problem (FLP) is a well-known optimization problem that seeks to arrange the layout of production units or facilities generally towards less cost and considering some adjacency factor between the facilities. The adjacency factor mainly represents the چکیده کامل
        The facility layout problem (FLP) is a well-known optimization problem that seeks to arrange the layout of production units or facilities generally towards less cost and considering some adjacency factor between the facilities. The adjacency factor mainly represents the material handling costs. In this research, a novel multi-objective mixed integer nonlinear programming (MINLP) model for the single-floor facility layout problem is developed. The model, unlike the current literature, considers some maintenance measures in addition to the classical adjacency factor. Firstly, some facilities need a certain amount of maintenance space around them. If this space is violated, some penalty would apply. Secondly, some facilities could have emergency maintenance requirements for which easy access from the entrance edges is necessary. This accessibility measure is optimized in the model. The validity of the proposed MINLP model is analyzed via simulation. The results show that if material handling costs are minimized, the maintenance measures will deviate approximately 100% of their optimal values. Moreover, if maintenance measures are optimized, the material handling cost will deviate around 50% of its optimal value. Both, classic and maintenance related measures show more sensitivity in dense and crowded production environments. پرونده مقاله
      • دسترسی آزاد مقاله

        106 - Colloids: Applications and Remaining Challenges
        Majid Molaie
        Using of colloids and polymeric microparticles are gradually increasing. It is observed that the positive effects of particles stems in both traditional applications such as column pickings, coatings and paints to more recent technologies in diagnostics, drug delivery a چکیده کامل
        Using of colloids and polymeric microparticles are gradually increasing. It is observed that the positive effects of particles stems in both traditional applications such as column pickings, coatings and paints to more recent technologies in diagnostics, drug delivery and optical devices are well documented. This review focuses on importance of colloids and covers their applications on three level: (1) The cell/tissue level; (2) The single device level; (3) Selfassembly. Then I state the working principles and developments in fabrication methods. Key advantages and challenges of colloids and polymeric microparticles are discussed as well. Papers reviewed in this study show that while there are practical methods to the synthesis of such particles but accurate control of anisotropy and morphology that is essential for specialized particles is a critical problem. Therefore, a new approach is desired, which generates geometrically and chemically anisotropic particles with high throughput. In addition, this approach should be able to generate particles with complex composition, and preferably have adaptability. پرونده مقاله
      • دسترسی آزاد مقاله

        107 - Characterization and Investigation of Grain Selection in Spiral Grain Selectors during Casting Single-Crystal Turbine Blades
        Hassan Gheisari Ebrahim Karamian
        Manufactured single crystal components using Ni-base super alloys are routinely used in the hot sections of aero engines and industrial gas turbines due to their outstanding high temperature strength, toughness and resistance to degradation in corrosive and oxidative en چکیده کامل
        Manufactured single crystal components using Ni-base super alloys are routinely used in the hot sections of aero engines and industrial gas turbines due to their outstanding high temperature strength, toughness and resistance to degradation in corrosive and oxidative environments. To control the quality of the single crystal turbine blades, particular attention has been paid to grain selection, which is used to obtain the single crystal morphology from a plethora of columnar grains. For this purpose, different designs of grain selectors are employed and the most common type is the spiral grain selector. A typical spiral grain selector includes a starter block and a spiral (helix) located above. It has been found that the grains with orientation well aligned to the thermal gradient survive in the starter block by competitive grain growth while the selection of the single crystal grain occurs in the spiral part. In the present study, 2Dspiral selectors with different geometries were designed and produced using a state-of-the-art Bridgeman Directional Solidification casting furnace to investigate the competitive growth during grain selection in 2d grain selectors. The principal advantage of using a 2-Dselector is to facilitate the wax injection process in investment casting by enabling significant degree of automation. The directional solidification process for obtaining single crystal component for Nickel Super alloys based on the competitive growth in 2D and 3D single crystal grain selector was experimentally investigated for various geometries. Transverse sections of the grain selectors using optical and EBSD microscopy techniques were observed to understand the competitive grain growth process. پرونده مقاله
      • دسترسی آزاد مقاله

        108 - کاربرد مبدل ماتریسی منبع امپدانسی سه فاز به تک فاز در توربین‌های بادی
        وحید اسدی راد سیدبابک مظفری سودابه سلیمانی مورچه خورتی
        در این مقاله یک ایده‌ی جدید از مبدل ماتریسی منبع امپدانسی سه فاز به تک فاز مستقیم در توربین های بادی به صورت مستقل از شبکه ارائه شده است. در مبدل های ماتریسی منبع امپدانسی مستقیم تنظیم دامنه ولتاژ و فرکانس خروجی با سیستم کنترلی دارای اهمیت می‌باشد. در توربین های بادی به چکیده کامل
        در این مقاله یک ایده‌ی جدید از مبدل ماتریسی منبع امپدانسی سه فاز به تک فاز مستقیم در توربین های بادی به صورت مستقل از شبکه ارائه شده است. در مبدل های ماتریسی منبع امپدانسی مستقیم تنظیم دامنه ولتاژ و فرکانس خروجی با سیستم کنترلی دارای اهمیت می‌باشد. در توربین های بادی به علت تغییر در سرعت باد فرکانس و ولتاژ ورودی در حال تغییر می باشد؛ که این تغییرات را به راحتی می توان با استفاده از مبدل ماتریسی منبع امپدانسی مستقیم تنظیم کرد. همچنین یک طرح کنترلی برای مبدل ماتریسی منبع امپدانسی سه فاز به تک فاز پیشنهادی ارائه شده است. استراتژی کنترلی برای مبدل ماتریسی منبع امپدانسی سه فاز به تک فاز مستقیم خواهد توانست؛ ولتاژ و فرکانس خروجی را در یک مقدار مطلوب تنظیم کند؛ همچنین اعوجاج هارمونیکی کل پایین در ولتاژ خروجی را تولید کند. ساختار و روش کنترلی پیشنهاد شده با استفاده از محیط سیمولینک نرم افزار متلب شبیه‌سازی شده و نتایج برای تأیید عملکرد مبدل ماتریسی منبع امپدانسی مستقیم در توربین بادی مورد بحث و بررسی قرار گرفته است. پرونده مقاله
      • دسترسی آزاد مقاله

        109 - ارائه یک مبدل dc-dc جدید بدون ترانسفورماتور با ضریب بهره بهبود یافته و تنش ولتاژ کم در دو سر کلید
        حسین اژدرفائقی بناب محمد رضا بنائی
        در این مقاله یک مبدل dc-dc تک کلیده بدون ترانسفورماتور جدید با ضریب بهره بالا و تنش ولتاژ کم در دو سر کلید پیشنهاد می‌شود. در مبدل پیشنهادی تنها یک کلید به کار رفته است به همین دلیل کنترل آن ساده می‌باشد و تلفات هدایتی کلید نیز در مبدل پیشنهادی پائین می‌باشد. بهره ولتاژ چکیده کامل
        در این مقاله یک مبدل dc-dc تک کلیده بدون ترانسفورماتور جدید با ضریب بهره بالا و تنش ولتاژ کم در دو سر کلید پیشنهاد می‌شود. در مبدل پیشنهادی تنها یک کلید به کار رفته است به همین دلیل کنترل آن ساده می‌باشد و تلفات هدایتی کلید نیز در مبدل پیشنهادی پائین می‌باشد. بهره ولتاژ مبدل پیشنهادی در مقایسه با مبدل افزاینده مرسوم و کاهنده-افزاینده بالاتر می‌باشد و مبدل پیشنهادی در ناحیه وسیع‌تری نسبت به مبدل‌های مرسوم می‌تواند کار ‌کند. مبدل پیشنهادی تنش ولتاژ کمی در دو سر کلید ایجاد می‌کند که باعث کاهش تلفات هدایتی کلید می‌شود. این مبدل در دو رژیم هدایت پیوسته و رژیم هدایت ناپیوسته می‌تواند کار کند. در این مقاله ضمن ارائه مدهای کاری مختلف مبدل پیشنهادی در دو رژیم هدایت به محاسبات مربوط به بهره، جریان‌های عبوری از عناصر، بازده و اندازه ریپل ولتاژ خازن‌ها پرداخته می‌شود. برای اثبات درستی محاسبات و عملکرد صحیح مبدل پیشنهادی نتایج شبیه‌سازی در محیط نرم‌افزار PSCAD و نیز نتایج عملی ارائه می‌شود. پرونده مقاله
      • دسترسی آزاد مقاله

        110 - طراحی بهینه، مدلسازی و بررسی عملکرد موتور القایی تک فاز شار محوری خازن دائم با استفاده از الگوریتم بهینه سازی تجمع ذرات بهبود یافته (IPSO)
        امین ابوطالبی نجف آبادی
        کاربرد روز افزون موتورهای القایی تکفاز شار محوری خازن دائم و بازده پایین آنها، باعث اهمیت مساله بهینه سازی این نوع موتورها گردیده است. در این مقاله، ضمن معرفی اصول الگوریتم های کلاسیک طراحی این نوع موتورها که شامل یافتن ابعاد قسمت های مختلف موتور و محاسبه پارامترهای الک چکیده کامل
        کاربرد روز افزون موتورهای القایی تکفاز شار محوری خازن دائم و بازده پایین آنها، باعث اهمیت مساله بهینه سازی این نوع موتورها گردیده است. در این مقاله، ضمن معرفی اصول الگوریتم های کلاسیک طراحی این نوع موتورها که شامل یافتن ابعاد قسمت های مختلف موتور و محاسبه پارامترهای الکتریکی مانند مقاومت ها و راکتانس ها و خازن است، با معرفی مدار معادل پیشنهادی در حالت دائمی به منظور کاهش فاصله هوایی موتور، به‌معرفی ساختار الگوریتم های بهینه سازی پرداخته و در ادامه از الگوریتم های بهینه سازی ژنتیک و تجمع ذرات بهبودیافته در راستای بهینه سازی طراحی موتور شار محوری جهت افزایش بازده، افزایش ضریب توان و کاهش حجم هسته استفاده می شود. بدین منظور یک موتور القایی تک فاز شار محوری با خازن دائم که کاربرد قابل توجهی در سیستم های تهویه دارد، انتخاب شده، مورد بررسی عملکردی قرار گرفته و با استفاده از فرمول های طراحی و به‌کمک مدار معادل حالت دائمی پیشنهادی و همچنین با استفاده از روش های هوشمند نظیر الگوریتم ژنتیک و تجمع ذرات بهبودیافته، بهینه سازی موتور جهت افزایش حداکثری بازده صورت گرفته و نتایج آن در قالب نمودارهای گشتاور- سرعت و بازده- سرعت رسم و با‌ یکدیگر مقایسه شده است. در پایان موتور طراحی شده به روش اجزای محدود جهت تایید الگوریتم طراحی، مدل حالت دائمی، الگوریتم بهینه سازی پیشنهادی و نتایج آزمایش ها شبیه سازی شده است. پرونده مقاله
      • دسترسی آزاد مقاله

        111 - درایوهای موتور القایی تکفاز
        غلامرضا عرب مارکده ایوب باباسالاری
        در این مقاله سعی شده است به طور مختصر موتورهای القایی تکفاز گوناگون مورد بررسی قرار گرفته و با یکدیگر مقایسه شوند. همچنین مروری بر مبدلهای مختلف مورد استفاده برای کنترل سرعت و راندمان موتور القایی تکفاز شده و معایب و محاسن آنها به تفضیل مورد بحث قرار گرفته است. با مقایس چکیده کامل
        در این مقاله سعی شده است به طور مختصر موتورهای القایی تکفاز گوناگون مورد بررسی قرار گرفته و با یکدیگر مقایسه شوند. همچنین مروری بر مبدلهای مختلف مورد استفاده برای کنترل سرعت و راندمان موتور القایی تکفاز شده و معایب و محاسن آنها به تفضیل مورد بحث قرار گرفته است. با مقایسه توپولوژیهای گوناگون مشخص می‌شودکه اینورتر PWM فرکانس متغیر بهترین انتخاب برای کنترل موتور القایی تکفاز است. پرونده مقاله
      • دسترسی آزاد مقاله

        112 - یک درایو کنترل V/f= cte برای موتور القایی تکفاز با خازن دائم
        پدرام شهریاری نسب حسین صفامهر مجید معظمی
        عملکرد ضعیف موتورهای القایی خانگی معمولی که در وسایلی چون یخچال، کولر، ماشین لباسشویی، خشک کن، فن، ابزارآلات دستی و پنجره‌های اتوماتیک استفاده می‌شوند، عموماً به دو دلیل می‌باشد. اول آن که جریان اولیه بالا در هنگام راه‌اندازی سبب افت ولتاژ شدید در سر ترمینال موتور می‌شو چکیده کامل
        عملکرد ضعیف موتورهای القایی خانگی معمولی که در وسایلی چون یخچال، کولر، ماشین لباسشویی، خشک کن، فن، ابزارآلات دستی و پنجره‌های اتوماتیک استفاده می‌شوند، عموماً به دو دلیل می‌باشد. اول آن که جریان اولیه بالا در هنگام راه‌اندازی سبب افت ولتاژ شدید در سر ترمینال موتور می‌شود و دوم عملکرد با یک سرعت ثابت و عدم وجود یک کنترل سرعت متغیر می‌باشد. در بسیاری از کاربردهای خانگی به صورت سنتی با تغیر قطب‌ها سرعت به صورت گسسته کنترل می‌شود. یک روش مناسب برای حل این مشکلات استفاده از یک درایو کنترل سرعت می‌باشد. در این مقاله، یک روش کنترل اسکالر ساده برای کنترل سرعت موتور القایی تکفاز خازن دائم (PCSPIM) مورد بررسی قرار گرفته است. فلسفه این روش بر اساس کنترل همزمان ولتاژ و فرکانس ترمینال ماشین است به گونه‌ای که V/f=Cte باشد. نتایج شبیه‌سازی و پیاده‌سازی عملی روش پیشنهادی بیانگر توانایی این روش کنترل سرعت ساده در کاربردهای خانگی می‌باشد. پرونده مقاله
      • دسترسی آزاد مقاله

        113 - امکان‌سنجی و مدیریت جاذبه‌های گردشگری با تأکید بر دیدگاه گردشگران (نمونه موردی: شهر برازجان)
        مسعود صفایی پور مجید گودرزی فاطمه قدوسی فرد
        گردشگری از مهم‌ترین فعالیت‌های انسان معاصر است که همراه با به وجود آوردن تغییراتی شگرف در سیمای زمین، اوضاع سیاسی، اقتصادی و فرهنگی روش زندگی انسان‌ها را دگرگون می‌سازد. امروزه صنعت گردشگری یکی از منابع مهم تولید، درآمد، اشتغال و ایجاد زیرساخت‌ها برای نیل به توسعه پایدا چکیده کامل
        گردشگری از مهم‌ترین فعالیت‌های انسان معاصر است که همراه با به وجود آوردن تغییراتی شگرف در سیمای زمین، اوضاع سیاسی، اقتصادی و فرهنگی روش زندگی انسان‌ها را دگرگون می‌سازد. امروزه صنعت گردشگری یکی از منابع مهم تولید، درآمد، اشتغال و ایجاد زیرساخت‌ها برای نیل به توسعه پایدار به شمار می‌آید و به‌عنوان یکی از عوامل اقتصادی کشورها از سوی برنامه‌ریزان اقتصادی پذیرفته‌شده است. هدف از پژوهش حاضر بررسی و تحلیل پتانسیل‌های گردشگری شهر برازجان هست. جامعه هدف شامل متخصصین، کارشناسان گردشگری، گردشگران و رهگذرانی است که از منطقه مورد مطالعه دیدن کرده‌اند. جهت تحلیل داده‌ها از آزمون‌های T تک نمونه‌ای، فریدمن و کای اسکوئر در نرم‌افزار SPSS استفاده شد. نتایج بررسی‌ها نشان داد در بیشتر ظرفیت‌های گردشگری شهر برازجان، مقدار محاسبه بیش‌ازحد مبنا است و مهم‌تر اینکه در بیشتر ظرفیت‌ها این تفاوت به لحاظ آماری معنادار است و وضعیت گویه های مربوط به جاذبه‌های گردشگری چشم‌گیر و معنادار است و به بیان دقیق‌تر، شهر برازجان از لحاظ شرایط طبیعی با میانگین 22/17، مذهبی با میانگین 17/15 و تاریخی با میانگین 56/9 دارای پتانسیل بالای گردشگری در استان بوشهر هست. پرونده مقاله
      • دسترسی آزاد مقاله

        114 - بررسی تاثیر رفتار کارآفرینانه بر کارآفرینی درون سازمانی در شرکت تکدانه مرند
        جبرئیل مرزی علمداری محمد حسن حدادی میرزا علی صبوری نیا
        هدف این تحقیق بررسی تاثیر رفتار کارآفرینانه بر کارآفرینی درون سازمانی است. روش تحقیق کاربردی و پیمایشی است که به روش میدانی اجرا شده است. جامعه آماری این تحقیق شامل کلیه کارکنان شرکت تکدانه مرند می باشد. تعداد کارکنان مشغول در این کارخانه غالب بر 1000 نفر بودند که بر اس چکیده کامل
        هدف این تحقیق بررسی تاثیر رفتار کارآفرینانه بر کارآفرینی درون سازمانی است. روش تحقیق کاربردی و پیمایشی است که به روش میدانی اجرا شده است. جامعه آماری این تحقیق شامل کلیه کارکنان شرکت تکدانه مرند می باشد. تعداد کارکنان مشغول در این کارخانه غالب بر 1000 نفر بودند که بر اساس جدول مورگان تعداد نمونه آماری 277 نفر بدست آمد. برای انتخاب نمونه آماری از روش تصادفی ساده استفاده شد. جهت گردآوری داده ها از پرسشنامه کارآفرینی درون سازمانی کورنوال و پرلمن (1990) و پرسشنامه رفتار کارآفرینانه زامپتاکیس و موستاکیس (2007) استفاده شد که روایی و پایایی آنها مورد تایید قرار گرفته است. برای تجزیه و تحلیل داده‌های جمع‎آوری شده توسط پرسشنامه‎های تحقیق از از مدل‌سازی معادلات ساختاری (SEM) با استفاده از نرم افزار اسمارت پی ال اس(Smart Pls) استفاده شد. نتایج آزمون فرضیات نشان می‌دهد ابعاد رفتار کارآفرینانه شامل کاهش کاغذ بازی، تغییر در رفتار کارکنان، بینش استراتژیک، ایجاد محیط کاری پر انرژی و محیط حمایتی بر کارآفرینی درون سازمانی در شرکت تکدانه مرند تاثیرگذار است. پرونده مقاله
      • دسترسی آزاد مقاله

        115 - ارزیابی آزمایشگاهی و تحلیلی لرزه ای مهاربندهای کمانش‌ناپذیر سه‌هسته‌ای
        علی چیگویی محمد علی رهگذر محسن ایزدی نیا
        در این مقاله جهت بهبود رفتار لرزه‌ای مهاربند‌های کمانش‌ناپذیر تک‌هسته‌ای، مهاربند‌های کمانش‌ناپذیر سه‌هسته‌ای پیشنهاد گردید که در آن از سه هسته با تنش تسلیم متفاوت به صورت موازی استفاده شده است. مهاربندهای کمانش‌ناپذیر به دو صورت تک هسته ای و سه هسته ای با ظرفیت کششی و چکیده کامل
        در این مقاله جهت بهبود رفتار لرزه‌ای مهاربند‌های کمانش‌ناپذیر تک‌هسته‌ای، مهاربند‌های کمانش‌ناپذیر سه‌هسته‌ای پیشنهاد گردید که در آن از سه هسته با تنش تسلیم متفاوت به صورت موازی استفاده شده است. مهاربندهای کمانش‌ناپذیر به دو صورت تک هسته ای و سه هسته ای با ظرفیت کششی و فشاری یکسان ساخته شد و تحت پروتکل بارگذاری ATC-24 به صورت یک عضو محوری در آزمایشگاه تحت نیروی کشش و فشار قرار گرفتند. سپس مهاربندهای کمانش‌ناپذیر تک و سه‌هسته‌ای در یک قاب خمشی فولادی به صورت قطری قرار گرفته و با استفاده از تحلیل پوش‌آور تطبیقی غیرخطی عملکرد لرزه‌ای و ضریب رفتار آن‌ها بدست آمده است. با توجه به نتایج آزمایشگاهی، سطح زیر منحنی حلقه ی هیسترزیس مهاربند کمانش‌ناپذیر سه هسته ای نسبت به مهاربند کمانش‌ناپذیر تک هسته ای به میزان 3/16‌% از مساحت بیشتری برخوردار است، همچنین ضریب میرای در تغییر طول نسبی 5/2% برای مهاربند کمانش‌ناپذیر سه‌هسته‌ای با اختلاف 8./8 % نسبت به مهاربند کمانش‌ناپذیر تک‌هسته‌ای بیشتر می‌باشد. میانگین ضریب رفتار حاصل از آنالیز پوش‌آور تطبیقی برای قاب خمشی فولادی مجهز به مهاربند کمانش‌ناپذیر تک‌هسته‌ای 11/8 و برای قاب خمشی فولادی مجهز به مهاربند کمانش‌ناپذیر سه‌هسته‌ای 14/9 بدست آمده است. در نتیجه‌ مهاربند کمانش‌ناپذیر سه هسته ای از ظرفیت جذب و استهلاک انرژی بالاتر و عملکرد لرزه‌ای بهتری نسبت به مهاربند کمانش‌ناپذیر تک‌هسته‌ای برخوردار است و همچنین شکل پذیری قاب خمشی فولادی مجهز به مهاربند کمانش‌ناپذیر سه‌هسته‌ای از قاب فولادی مجهز به مهاربند کمانش‌ناپذیر تک‌هسته‌ای بالاتر است که نشان از رفتار بهتر مهاربند کمانش‌ناپذیر سه‌هسته‌ای در برابر زلزله و امر بهسازی سازه‌ها دارد. پرونده مقاله
      • دسترسی آزاد مقاله

        116 - مطالعه رفتار خمشی - برشی تیرهای بتنی و مقایسه نتایج آزمایشگاهی با پیش بینی آیین نامه های مختلف
        یوسف عباسی پروین طالب مرادی شقاقی مسعود پوربابا سعید میررضایی یوسف زندی
        در این تحقیق یک مطالعه آزمایشگاهی بر روی رفتار تیرهای بتنی تک آرمه (RC)، بدون خاموت انجام گرفته است. بدین منظور چهار تیر بتنی به صورت تک آرمه با ابعاد 250 در300 میلی متر و به طول1650میلی متر و در چهار درصد هندسی، 36/0، 64/0 ، 05/1 و 45/1 از میلگردهای معمولی (میلگرد S400 چکیده کامل
        در این تحقیق یک مطالعه آزمایشگاهی بر روی رفتار تیرهای بتنی تک آرمه (RC)، بدون خاموت انجام گرفته است. بدین منظور چهار تیر بتنی به صورت تک آرمه با ابعاد 250 در300 میلی متر و به طول1650میلی متر و در چهار درصد هندسی، 36/0، 64/0 ، 05/1 و 45/1 از میلگردهای معمولی (میلگرد S400) و بتن با مقاومت فشاری حدود 35 مگاپاسکال طراحی گردیده و طی آزمون خمش چهار نقطه ای مورد ارزیابی قرار گرفتند. نتایج آزمون نشان داد که افزایش درصد هندسی میلگردهای کششی در افزایش ظرفیت برشی تیرها کارآمد هستند. در ادامه مقاومت برشی و خمشی بدست آمده از آزمون با مقاومت برشی و خمشی نهایی پیش بینی شده از آیین نامه هایAS360، ACI، JSCE، EN، ,CSANZS و ایران و رابطه پیشنهاد شده توسط الطعان و الفیل مقایسه شد. بررسی ها حاکی از دقت بالای رابطه الطعان-الفیل با متوسط 26/1 برابر کمتر از نتایج عملی، و اختلاف زیاد مقادیر پیشنهاد شده توسط روابط آین نامه بتن ایران و آیین نامه کشور ژاپن (JSCE) به ترتیب با متوسط 29/2 برابر و 35/2 برابر کمتر از مقاومت برشی حاصل ازنتایج آزمون، در مقایسه با سایر آیین نامه های مطرحه در این تحقیق می باشد به عبارت دیگر حاشیه اطمینان بیشتری را در نظر می گیرند. پرونده مقاله
      • دسترسی آزاد مقاله

        117 - A New Approach for Solving Fuzzy Single Facility Location Problem Under L1 Norm
        Nemat Allah Taghi-Nezhad Fatemeh Taleshian
        The location allocation problem is one of the most attractive optimization problems that is widely used in the real world. Therefore, any attempt to bring this problem closer to real-world conditions would be significant and useful. In this paper, we utilize fuzzy logic چکیده کامل
        The location allocation problem is one of the most attractive optimization problems that is widely used in the real world. Therefore, any attempt to bring this problem closer to real-world conditions would be significant and useful. In this paper, we utilize fuzzy logic due to the uncertainty of parameters in the real world. That is the weights (the amounts of demands of customers) and variables (the coordinates of the optimal place) are both considered fuzzy numbers. If these variables are considered definitively, due to various conditions and reasons, it may not be possible to acquire land or build a facility center in it, so we also considered this variable in a fuzzy way and a facility center area was obtained, that certainly, the decision maker can find the right place more easily. To solve the fuzzy problem a new approach based on presenting the problem in the form of equivalent expressions is proposed. This equivalent problem is solved using fuzzy arithmetic. پرونده مقاله
      • دسترسی آزاد مقاله

        118 - Introducing Pt/ZnO as a new non carbon substrate electro catalyst for oxygen reduction reaction at low temperature acidic fuel cells
        Rasol Abdullah Mirzaie Fatemeh Hamedi
        Gas diffusion electrode was used for providing better conditions in fuel cell systems for oxygen reduction reaction (ORR). Because the slow kinetics of the oxygen reduction reaction at the proton exchange membrane fuel cell cathode restricts fuel cell efficiency. To thi چکیده کامل
        Gas diffusion electrode was used for providing better conditions in fuel cell systems for oxygen reduction reaction (ORR). Because the slow kinetics of the oxygen reduction reaction at the proton exchange membrane fuel cell cathode restricts fuel cell efficiency. To this end, researchers have used platinum-coated carbon. In the present study, due to the reduction of carbon corrosion, Zinc oxide nanoparticles have been employed as a support material for platinum. The Pt/ZnO nanoparticles catalyst was made via a combined process of impregnation and seeding method. The microstructure of coating was characterized using scanning electron microscopy (SEM) which indicates that Pt nanoparticles are uniformly dispersed on the surface of ZnO. In order to investigate the chemical composition and crystalline phases of coating, X-ray analysis was carried out. Electrochemical Impedance Spectroscopy (EIS) was carried out for comparing the charge transfer effect during the ORR. The catalytic performance of the electrodes for ORR is evaluated through linear sweep voltammetry measurement. The O2 reduction current for Pt/ZnO alone is expectedly low due to the low electronic conductivity in ZnO. However, adding single-wall carbon nanotube (SWCNT) to the reaction layer improves the electrode performance. The prepared Pt/ZnO/SWCNT 30 wt. % electrode shows high catalytic activity for the ORR, which is probably attributed to conductivity changes caused by the addition of SWCNT. The electrochemical active surface area (ECSA) and durability investigation was studied by cyclic voltammetry in nitrogen saturated 0.5 M H2SO4. The results calculated from ECSA measurements were indicated that the degradation rate of optimized electrode is smaller than Pt/C electrode. پرونده مقاله
      • دسترسی آزاد مقاله

        119 - Single atom catalyst
        AmirMahdi Tavassoli
        AmirMahdi Tavassoli was born in 1994 and holds a Diploma in Mathematics with excellent grades and a bachelor’s degree in applied chemistry from the university of Malayer. During his Bachelor's, he worked on decolorizing organic compounds. AmirMahdi completed his m چکیده کامل
        AmirMahdi Tavassoli was born in 1994 and holds a Diploma in Mathematics with excellent grades and a bachelor’s degree in applied chemistry from the university of Malayer. During his Bachelor's, he worked on decolorizing organic compounds. AmirMahdi completed his master’s degree in organic chemistry from the university of Bu-Ali Sina under the supervision of Professor Mohammad Ali Zolfigol, where he worked on magnetic nanoparticles and ionic liquids to synthesize organic compounds in the laboratory of organic chemistry. During this time, he participated in more than five national organic chemistry seminars. He continues his scientific research and works on multicomponent reactions and covalent organic frameworks. پرونده مقاله
      • دسترسی آزاد مقاله

        120 - The Quest for Sustainable Catalysis through Transition Metal Doped Carbon-based Single-Atom Catalysts
        Chamalki Madhusha Madhavi de Silva Imalka Munaweera Chandani Perera Nilwala Kottegoda
        Single-atom catalysts have recently received much scientific attraction as sustainable catalysts due to their greater activity and selectivity arising from the uniform distribution, electronic properties, and quantum mechanical interactions at the nanoscale of single at چکیده کامل
        Single-atom catalysts have recently received much scientific attraction as sustainable catalysts due to their greater activity and selectivity arising from the uniform distribution, electronic properties, and quantum mechanical interactions at the nanoscale of single atoms coupled with interactions at the metal-support interfaces. Carbon-based materials are an excellent support material for single-atom catalysts owing to their inherent properties such as adjustable pore size, high surface area to volume ratio, and ease of surface functionalization. The interactions at the single atom-carbon support interfaces give rise to the extraordinary catalytic activity in carbon-based single metal catalysts thus opening doors for a wide range of sustainable applications. This review focuses on the evolution of carbon-based single-atom catalysis covering different types of carbon substrates, usage of different single atoms with special attention to transition metals, and its wide range of applications including photocatalysis, organic catalysis, and electrocatalysis followed by the future perspectives on carbon-based single-atom catalysts. پرونده مقاله
      • دسترسی آزاد مقاله

        121 - Stability Theorem and Results for Quadrupled Fixed Point of Contractive Type Single Valued Operators
        Samuel Aniki Kamilu Rauf
        This paper present the existence and uniqueness of quadrupled fixed point theorems, whose method is quite primarily based definitely on Perov-type fixed point theorem for contraction in metric spaces equipped with vector-valued matrices. Furthermore, the study consist o چکیده کامل
        This paper present the existence and uniqueness of quadrupled fixed point theorems, whose method is quite primarily based definitely on Perov-type fixed point theorem for contraction in metric spaces equipped with vector-valued matrices. Furthermore, the study consist of Ulam-Hyers stability results for quadrupled fixed points of contractive type single valued mappings on complete metric spaces will be obtained. پرونده مقاله
      • دسترسی آزاد مقاله

        122 - A Branch and Bound for single machine stochastic batch scheduling with delivery costs. A Chance Constraint approach (Case study in Iran)
        حمیدرضا حداد
        This paper study a single machine stochastic scheduling problem based on an Iranian real case study in Saipa company in which the objective is to minimize total completion times and delivery costs. According to existence data sets of this company the processing times fo چکیده کامل
        This paper study a single machine stochastic scheduling problem based on an Iranian real case study in Saipa company in which the objective is to minimize total completion times and delivery costs. According to existence data sets of this company the processing times follows a Normal distribution and based on the managerial decisions two objectives have to be achieved simultaneously including total completion times and controlling tardiness values so that their values are lower than an specified penalty. So, a Chance Constraint Programming (CCP) approach is employed and a mathematical model is presented. In order to solve the problem a Branch and Bound (B&B) method is used to solve the problem optimally and a Particle Swarm Optimization (PSO) metaheuristic is used to find near optimal solutions for large scales. The results show that using the proposed mathematical model and solution approach, could increase the effectiveness and efficiency of production line as 16 to 40 percent. Computational experiments validate the accuracy of proposed method. پرونده مقاله
      • دسترسی آزاد مقاله

        123 - Investigation of Bovine Leukocyte Adhesion Deficiency (BLAD) and Complex Vertebral Malformation (CVM) in a Population of Iranian Holstein Cows
        B. Hemati S. Gharaie-Fathabad M.H. Fazeli Z. Namvar M. Ranji
        In the present research, molecular detection of bovine leukocyte adhesion deficiency (BLAD) and complex vertebral malformation (CVM)in a population of Iranian Holstein cows has been carried outusing milk somatic cells by polymerase chain reaction-restriction fragment le چکیده کامل
        In the present research, molecular detection of bovine leukocyte adhesion deficiency (BLAD) and complex vertebral malformation (CVM)in a population of Iranian Holstein cows has been carried outusing milk somatic cells by polymerase chain reaction-restriction fragment length polymorphism(PCR-RFLP). The BLAD and CVM are monogenic and autosomal recessive heredity lethal syndrome in Holstein-Friesian cattle. BLAD characterized by affecting the haematopoietic system via reduced expression of the adhesion molecules on neutrophils. CVM characterized by intra-uterine mortality with disorders such as short neck, curved legs, abnormality of ribs and some certain heart abnormalities. In the first step of our research program,tank milk samples from 50 herds were collected. PCR-RFLP was performed to detect a point mutation of both CVM and BLAD genes. After DNA extraction, PCR was amplified using specific primers for 136 bp DNA (CD18 gene) and233 bp DNA (SLC35A3 gene).TaqIand EcoT22I enzymes were used to identify both BLAD and CVM alleles of both genes by digestion of PCR products.In these herds, we did not find any affected herd with the mutant allele of BLAD comparing with a positive evidence but the mutation of SLC35A3 gene found in 17 different herds. In the next step of our study a herd with 120 cows was randomly selected for individual test using blood samples. We showed two cows out of 120 were identified as carriers of this gene. In this herd, the total number of dominant homozygote (AA), heterozygote (Aa) and recessive homozygote (aa) genotypes for CVM were 118, 2 and 0, respectively and the frequency of A and a alleles were 0.992 and 0.008, respectively. The other affected herds will be tested in the next step of our research program. پرونده مقاله
      • دسترسی آزاد مقاله

        124 - Association of <i>IGF-I</i> Gene Polymorphisms with Carcass Traits in Iranian Mehraban Sheep Using SSCP Analysis
        S. Behzadi S.R. Miraei-Ashtiani M. Sadeghi P. Zamani R. Abdoli
        Molecular genetics selection on individual genes is a promising method to genetically improve economically important traits in livestock. The insulin like growth factor-I (IGF-I) gene may play important roles in growth of multiple tissues, including muscle cells, cartil چکیده کامل
        Molecular genetics selection on individual genes is a promising method to genetically improve economically important traits in livestock. The insulin like growth factor-I (IGF-I) gene may play important roles in growth of multiple tissues, including muscle cells, cartilage and bone. The objectives of the present study were the estimate the haplotype frequencies of the IGF-I gene polymorphisms in Iranian Mehraban sheep and to determine associations between polymorphisms and carcass traits in 439 individuals. Polymerase chain reaction-single strand conformational polymorphism (PCR-SSCP) and DNA sequencing methods were employed in screening for genetic variation. Two single nucleotide polymorphisms (C114G and G116A) and two amino acid exchange (S5T and G6S) withthree patterns were found in IGF-I gene fragment. Associations of IGF-I patterns with blood cholesterol and blood triglycerides were significant (P&lt;0.05) and tended to be significant (P&lt;0.1) for dorsal fat thick and carcass weight. The other studied traits were not significantly affected by different patterns of IGF-I. This finding indicates that IGF-I polymorphisms may be used as DNA markers for selection in the breeding process of Mehraban sheep. پرونده مقاله
      • دسترسی آزاد مقاله

        125 - Molecular Screening of Varroa-Resistant Trait of Honey Bee Colonies based on <i>NorpA2</i> Candidate Gene Polymorphism: A Genetic Case-Control Study
        B. Sepehri S. Alijani A. Javanmard H. Johnmohammadi K. Hasanpur
        In recent years the Varroa destructor mite has been a dominant challenge for honey bee colonies, worldwide. Varroa- sensitive hygiene, a behavioral characteristic of honey bee, involves the detection and removal of Varroa larvae from the colony. It has been exploited as چکیده کامل
        In recent years the Varroa destructor mite has been a dominant challenge for honey bee colonies, worldwide. Varroa- sensitive hygiene, a behavioral characteristic of honey bee, involves the detection and removal of Varroa larvae from the colony. It has been exploited as a recordable trait for Varroa resistance. The sense of smell is a key element in Varroa sensitive hygiene behavior. In this scenario, NorpA2 candidate gene, a putative olfactory receptor, is associated with vision and smell in honey bee and is known as a candidate gene for Varroa sensitive hygiene. With this motivation, the main goal of the current work was to determine some single nucleotide polymorphism (SNP) markers of NorpA2 candidate gene employing PCR sequencing in a case-control approach. To this end, after the identification of resistant (RES) and susceptible (SUS) colonies according to the percentage of infections of the drone pupae to Varroa mite, a total of 10 drone pupae (5 from SUS and 5 from RES) were selected and were subjected for DNA isolation. The polymerase chain reaction (PCR) was performed based on two pairs of specific primers for the amplification of 5&cent; untranslated region (5&cent;UTR) and promoter regions of NorpA2 gene. After expected size bands were observed, the purification process and Sanger sequencing of the PCR products were carried out. The sequencing results were quality checked and the alignment and clustering were done using the BLAST and MAFTT software, respectively. Sequences of both UTR and promoter regions displayed multiple variations (SNP, deletion). Interestingly, the results showed the existence of three specific differences in sequence in the form of SNP (C/T) at position 308 and the form of SNP/deletion at positions 504 and 563 of the nucleotide sequence region in the promoter between the SUS and RES groups. To our knowledge, this is the first report on the identification of biomarkers to control host-mite interaction in the honey bee Apis mellifera. Further research is required for the reported SNPs to be validated as biomarkers of resistance to Varroa. پرونده مقاله
      • دسترسی آزاد مقاله

        126 - Search for Association between Ovine Wingless-Type MMTV Integration Site Family Member (<i>Wnt10A</i>) Genes with Supernumerary Teat in Ghezel and Romanov Sheep
        S. Eydivandi S. Eghbalsaied M. Momen E. Khajouei A. Javanmard S.M. Ghoreishifar
        Supernumerary teats (SNT, polythelia) is a common abnormality in many mammalian species including sheep. Recently, the WNT10A candidate gene has been reported to be associated with regulation of embryonic programming for mammary gland connective tissue differentiation a چکیده کامل
        Supernumerary teats (SNT, polythelia) is a common abnormality in many mammalian species including sheep. Recently, the WNT10A candidate gene has been reported to be associated with regulation of embryonic programming for mammary gland connective tissue differentiation and embryogenesis. Here, we propose that variants of this candidate gene may be linked with SNT in Ghezel (GHE) and Romanov (ROM) sheep. Therefore, a case-control study was conducted to uncover this abnormal phenotype. The study group consisted of fifteen individuals which had four functional teats (GHE=10, ROM=5). The control group consisted of thirty individuals which each had two (normal) teats (GHE=20, ROM=10). After extraction of genomic DNA from all samples, the candidate gene region was amplified using routine PCR. Genotyping at the WNT10A gene was performed by sequencing of the purified amplicons. Genotypes and allele frequencies were compared between the two study groups using the &chi;2 statistical test. A P-value of 0.05 was considered to be the threshold below which all results were significant. No effect of allelic variation (A/G in exon 4) between case and control groups in GHE and ROM sheep was found. In summary, our study provides preliminary results linking candidate gene this single nucleotide polymorphism to SNT in GHE and ROM sheep. پرونده مقاله
      • دسترسی آزاد مقاله

        127 - Evaluation of Single Cell Protein as a Non-Conventional Feedstuff in Broilers Feeding
        م.ر. پورعلمی س. سیفی ع.ر. عبدالهی کاکرودی ر. خوشبخت
        Single cell protein (SCP) is the definition for dried cells originated from single-celled organisms intended to be used as a protein source in human foods or animal feeds. An experiment has been conducted to evaluate the various levels of single cell protein on fecal mi چکیده کامل
        Single cell protein (SCP) is the definition for dried cells originated from single-celled organisms intended to be used as a protein source in human foods or animal feeds. An experiment has been conducted to evaluate the various levels of single cell protein on fecal microflora and productive traits of broiler chickens. A total of 192 day-old Ross 308 male chicks were randomly divided into 4 treatments. Each treatment consists of 48 birds and 4 replicates of 12 birds each. From day one, birds were fed either a corn-soybean meal basal diet with different levels of SCP (0, 5, 10 and 15 percent of as fed basis diet). Four birds from each treatment were randomly selected for slaughter and microbial study at day 47. Total counts of aerobic bacteria, Lactobacillus and Coliforms in the gut were not significantly affected by dietary treatments. The SCP at the levels of 10 and 15% caused to severe mortality. Also, SCP had adverse impacts on body weight gain, feed intake and feed efficiency. In conclusion, although SCP reduced feed cost, but it had some adverse effects on birds&rsquo; performance. پرونده مقاله
      • دسترسی آزاد مقاله

        128 - بررسی ضریب دبی جریان در سرریز کنگره ای تک سیکل به روش CFD
        فرهاد میثاقی علیرضا صدیق امیرحسین امانی
        سرریز های کنگره ای نوعی از سرریزهای چند وجهی هستند که با دارا بودن دو وجه باعث افرایش دبی عبوری می گردد. این نوع طول مؤثر بیش تری نسبت به سرریزهای لبه تیز معمول دارند. به این ترتیب می توانند دبی بیش تری در مقایسه با سرریزهای معمول برای کانال با عرض و ارتفاع آب مشابه را چکیده کامل
        سرریز های کنگره ای نوعی از سرریزهای چند وجهی هستند که با دارا بودن دو وجه باعث افرایش دبی عبوری می گردد. این نوع طول مؤثر بیش تری نسبت به سرریزهای لبه تیز معمول دارند. به این ترتیب می توانند دبی بیش تری در مقایسه با سرریزهای معمول برای کانال با عرض و ارتفاع آب مشابه را از خود عبور دهند. در این تحقیق به بررسی عددی تأثیر پارامترهای هندسی مؤثر بر ضریب دبی جریان سرریز کنگره ای تک سیکل با استفاده از نرم افزار FLUENT و به صورت سه بعدی پرداخته شد. برای مدل کردن آشفتگی از مدل k-&epsilon; روش RNG و برای تعیین موقعیت پروفیل سطح آزاد از روش VOF استفاده شد. نتایج به دست آمده از بررسی مدل های عددی با مقادیر حاصله از سرریز مستطیلی هم عرض کانال مقایسه شد. نتایج نشان داد برای یک H/P مشخص، با افزایش زاویه رأس (&theta;)، ضریب دبی جریان افزایش می یابد و عملکرد سرریز مستطیلی هم عرض کانال نسبت به سرریز کنگره ای تک سیکل کم تر می باشد. همچنین سرریز کنگره ای تک سیکل در بارهای هیدرولیکی کم، عملکرد مناسبی داشته و ضریب دبی روند صعودی دارد. پرونده مقاله
      • دسترسی آزاد مقاله

        129 - Resource Management for 5G-satellite Communication Systems based on Queuing Theory
        Pedram Hajipour
        Nowadays, with the advent of new satellite services, the need for resource management in the emerging fifth generation satellite systems (5G-satellite) is inevitable. Thus, to solve this problem, the Bandwidth Manager for resource reservation in satellite link is mandat چکیده کامل
        Nowadays, with the advent of new satellite services, the need for resource management in the emerging fifth generation satellite systems (5G-satellite) is inevitable. Thus, to solve this problem, the Bandwidth Manager for resource reservation in satellite link is mandatory. On the other hand, due to limited resources, their resource management‌ is essential. In order to resource management in 5G-satellite systems, can be applied in one phase or many phases. In this paper, resource management for 5G-satellite services is evaluated. The proposed optimization problem is to maximize mean response time under the propagation delay constraints in satellite links. We solve the considered optimization problem via the single phase and two phase algorithms. Finally, through simulation, the proposed algorithms are investigated and confirmed. In our scenarios, satellite is a Central node in call flows and ground stations are End nodes in 5G-satellite based on Internet protocol. So we simulated all of scenarios in matlab software for this reason. پرونده مقاله
      • دسترسی آزاد مقاله

        130 - ارزیابی ساختار فضایی شهر از منظر توسعه‌ی الگوی چندهسته‌ای (مطالعه موردی: کلان‌شهر تبریز)
        جعفر مهران‌پور محمدرضا پورمحمدی شهریور روستایی
        مقدمه: ساختار فضایی شهر تحت تأثیر نیروهای اجتماعی، اقتصادی، سیاسی، کالبدی، تکنولوژی و مدیریتی به شکل‌های مختلفی نمایان می‌گردد و دو الگوی تک‌هسته‌ای و چندهسته‌ای از مشهودترین این ساختارها می‌باشد. در این بین، ساختار فضایی و توسعه‌ی شهری چندهسته‌ای به دلیل تعدد مراکز می‌ چکیده کامل
        مقدمه: ساختار فضایی شهر تحت تأثیر نیروهای اجتماعی، اقتصادی، سیاسی، کالبدی، تکنولوژی و مدیریتی به شکل‌های مختلفی نمایان می‌گردد و دو الگوی تک‌هسته‌ای و چندهسته‌ای از مشهودترین این ساختارها می‌باشد. در این بین، ساختار فضایی و توسعه‌ی شهری چندهسته‌ای به دلیل تعدد مراکز می‌تواند ساختارهای نسبتاً یکنواخت، متعادل و همگن را در سطح شهر شکل دهد و فعالیت‌ها و جمعیت را به نوع مناسبی توزیع کند. هدف پژوهش: با توجه به اهمیت الگوی ساختار فضایی چندهسته‌ای علی‌الخصوص برای شهرهای بزرگ با جمعیت بالا و فعالیت‌های متنوع و پیچیده، هدف از پژوهش حاضر ارزیابی ساختار فضایی کلان‌شهر تبریز از منظر توسعه‌ی الگوی چندهسته‌ای می‌باشد.روش شناسی تحقیق: روش تحقیق در پژوهش حاضر کمی با ماهیت تحلیلی-اکتشافی می‌باشد که در راستای تجزیه و تحلیل اطلاعات در بخش توزیع عملکردها از روش مدل ضریب مکانی (LQ) و رگرسیون جغرافیایی وزنی و در بخش رشد جمعیتی از روش نرخ رشد استفاده شده است. قلمرو جغرافیایی پژوهش: قلمرو جغرافیایی پژوهش شامل کلان‌شهر تبریز می‌باشد.یافته ها و بحث: یافته‌های تحقیق نشان می‌دهد که ساختار فضایی کلان‌شهر تبریز در حال حاضر به‌صورت دو قطبی قابل مشاهده بوده و منطقه‌ی مرکزی (منطقه 8) و شرق شهر (منطقه 2 و بخشی از منطقه 1) بیشتر عملکردها را به خود اختصاص داده‌اند. با این حال، با توجه به گسترش عملکردها در شمال شهر و با برنامه‌ریزی مناسب و توزیع متناسب عملکردها در مناطق دیگر (جنوب و غرب) می‌توان مقدمات ساختار فضایی و توسعه‌ی شهری چندهسته‌ای را در کلان‌شهر تبریز فراهم نمود.نتایج: نتایج حاکی از آن است که مرکزگریزی در کلان‌شهر تبریز کاملاً مشهود بوده و هسته‌های جمعیتی جدید در بخش‌های شرقی، شمالی و غربی در حال افزایش می‌باشند. پرونده مقاله
      • دسترسی آزاد مقاله

        131 - Multiple Dependent States Repetitive Sampling Control Chart for Monitoring Rayleigh Distributed Data
        Srinivasa Rao Gadde Olatunde Adebayo Adeoti
        An attribute control chart for Rayleigh distribution based on the multiple dependent state repetitive sampling (MDSRS) is developed in this paper. The performance of the proposed chart is evaluated in terms of average run length for the design of the proposed chart. Fur چکیده کامل
        An attribute control chart for Rayleigh distribution based on the multiple dependent state repetitive sampling (MDSRS) is developed in this paper. The performance of the proposed chart is evaluated in terms of average run length for the design of the proposed chart. Furthermore, the control chart constants for instance test time multiplier; inner and outer control limits coefficients are determined by considering the process in-control average run length (ARL) in support of different sample sizes. The efficiency of the proposed chart is compared with some competing control charts using other sampling methods such as single sampling (SS), multiple dependent states (MDS) and repetitive sampling (RS). The application of the proposed chart is illustrated using simulated data, which showed the superiority of the proposed chart as compared to the competing charts. Based on the ARL performance of the proposed chart and the application example, it is recommended that the process engineers use the proposed chart when monitoring the number of failed products that follow the Rayleigh distribution. پرونده مقاله
      • دسترسی آزاد مقاله

        132 - An L1-norm method for generating all of efficient solutions of multi-objective integer linear programming problem
        Ghasem Tohidi Shabnam Razavyan
        This paper extends the proposed method by Jahanshahloo et al. (2004) (a method for generating all the efficient solutions of a 0&ndash;1 multi-objective linear programming problem, Asia-Pacific Journal of Operational Research). This paper considers the recession directi چکیده کامل
        This paper extends the proposed method by Jahanshahloo et al. (2004) (a method for generating all the efficient solutions of a 0&ndash;1 multi-objective linear programming problem, Asia-Pacific Journal of Operational Research). This paper considers the recession direction for a multi-objective integer linear programming (MOILP) problem and presents necessary and sufficient conditions to have unbounded feasible region and infinite optimal values for objective functions of MOILP problems. If the number of efficient solution is finite, the proposed method finds all of them without generating all feasible solutions of MOILP or concluding that there is no efficient solution. In any iteration of the proposed algorithm, a single objective integer linear programming problem, constrained problem, is solved. We will show that the optimal solutions of these single objective integer linear programming problems are efficient solutions of an MOILP problem. The algorithm can also give subsets of efficient solutions that can be useful for designing interactive procedures for large, real-life problems. The applicability of the proposed method is illustrated by using some numerical examples. پرونده مقاله
      • دسترسی آزاد مقاله

        133 - Periodic flexible maintenance planning in a single-machine production environment
        Mehdi Iranpoor S. M. T. Fatemi Ghomi
        Preventive maintenance is the essential part of many maintenance plans. From the production point of view, the flexibility of the maintenance intervals enhances the manufacturing efficiency. On the contrary, the maintenance departments tend to know the timing of the lon چکیده کامل
        Preventive maintenance is the essential part of many maintenance plans. From the production point of view, the flexibility of the maintenance intervals enhances the manufacturing efficiency. On the contrary, the maintenance departments tend to know the timing of the long term maintenance plans as certain as possible. In a single-machine production environment, this paper proposes a simulation&ndash;optimization approach which establishes periodic flexible maintenance plans by determining the time between the maintenance intervals and the flexibility (i.e., length) of each interval. The objective is the minimization of the estimated total costs of the corrective and preventive maintenance, the undesirability of the flexibility (i.e., uncertainty) in maintenance timing, and the tardiness and long due date costs of jobs. Two mixed continuous-discrete variations of the ant colony optimization algorithm and the particle swarm optimization algorithm are developed as the solution approaches. Numerical studies are used to compare the performance of these algorithms. Further, the average reduction of the total costs gained from the flexibility of maintenance intervals on a wide range of parameters is reported. پرونده مقاله
      • دسترسی آزاد مقاله

        134 - JIT single machine scheduling problem with periodic preventive maintenance
        Mohammadreza Shahriari Naghi Shoja Amir Ebrahimi Zade Sasan Barak Mani Sharifi
        This article investigates a JIT single machine scheduling problem with a periodic preventive maintenance. Also to maintain the quality of the products, there is a limitation on the maximum number of allowable jobs in each period. The proposed bi-objective mixed integer چکیده کامل
        This article investigates a JIT single machine scheduling problem with a periodic preventive maintenance. Also to maintain the quality of the products, there is a limitation on the maximum number of allowable jobs in each period. The proposed bi-objective mixed integer model minimizes total earliness-tardiness and makespan simultaneously. Due to the computational complexity of the problem, multi-objective particle swarm optimization (MOPSO) algorithm is implemented. Also, as well as MOPSO, two other optimization algorithms are used for comparing the results. Eventually, Taguchi method with metrics analysis is presented to tune the algorithms&rsquo; parameters and a multiple criterion decision making technique based on the technique for order of preference by similarity to ideal solution is applied to choose the best algorithm. Comparison results confirmed the supremacy of MOPSO to the other algorithms. پرونده مقاله
      • دسترسی آزاد مقاله

        135 - Techniques for cash management in scheduling manufacturing operations
        Mehdy Morady Gohareh Naser Shams Gharneh Reza Ghasemy Yaghin
        The objective in traditional scheduling is usually time based. Minimizing the makespan, total flow times, total tardi costs, etc. are instances of these objectives. In manufacturing, processing each job entails a cost paying and price receiving. Thus, the objective shou چکیده کامل
        The objective in traditional scheduling is usually time based. Minimizing the makespan, total flow times, total tardi costs, etc. are instances of these objectives. In manufacturing, processing each job entails a cost paying and price receiving. Thus, the objective should include some notion of managing the flow of cash. We have defined two new objectives: maximization of average and minimum available cash. For single machine scheduling, it is demonstrated that scheduling jobs in decreasing order of profit ratios maximizes the former and improves productivity. Moreover, scheduling jobs in increasing order of costs and breaking ties in decreasing order of prices maximizes the latter and creates protection against financial instability. پرونده مقاله
      • دسترسی آزاد مقاله

        136 - An improved particle swarm optimization with a new swap operator for team formation problem
        Walaa H. El-Ashmawi Ahmed F . Ali Mohamed A. Tawhid
        Formation of effective teams of experts has played a crucial role in successful projects especially in social networks. In this paper, a new particle swarm optimization (PSO) algorithm is proposed for solving a team formation optimization problem by minimizing the commu چکیده کامل
        Formation of effective teams of experts has played a crucial role in successful projects especially in social networks. In this paper, a new particle swarm optimization (PSO) algorithm is proposed for solving a team formation optimization problem by minimizing the communication cost among experts. The proposed algorithm is called by improved particle optimization with new swap operator (IPSONSO). In IPSONSO, a new swap operator is applied within particle swarm optimization to ensure the consistency of the capabilities and the skills to perform the required project. Also, the proposed algorithm is investigated by applying it on ten different experiments with different numbers of experts and skills; then, IPSONSO is applied on DBLP dataset, which is an example for benchmark real-life database. Moreover, the proposed algorithm is compared with the standard PSO to verify its efficiency and the effectiveness and practicality of the proposed algorithm are shown in our results. پرونده مقاله
      • دسترسی آزاد مقاله

        137 - A systematic review on supplier selection and order allocation problems
        Sourour Aouadni Ismahene Aouadni Abdelwaheb Reba&iuml;
        The supplier selection and order allocation are two key strategic decisions in purchasing problem. The review presented in this paper focuses on the supplier selection problems (SSP) and order allocation from year 2000 to 2017 in which a new structure and classification چکیده کامل
        The supplier selection and order allocation are two key strategic decisions in purchasing problem. The review presented in this paper focuses on the supplier selection problems (SSP) and order allocation from year 2000 to 2017 in which a new structure and classification of the existing research streams and the different MCDM methods and mathematical models used for SSP will be presented. The review was examined in three aspects: the summaries of the existing evidence concerning the problems, the identification of gaps in the current research to help determine where further investigation might be needed and positioning new research activities. پرونده مقاله
      • دسترسی آزاد مقاله

        138 - تاملی بر پنجره واحد فیزیکی شروع کسب و کار؛ نقش و جایگاه آن در بهبود فضای کسب و کار
        جمیل میلانی
        بهبود فضای کسب و کار و رفع موانع و مشکلات مرتبط با آن امری حیاتی در راستای توسعه اقتصادی می باشد. فضای کسب و کار نیازمند توجه و حمایت و برنامه ریزی ویژه می باشد. تجربه کشورهای توسعه یافته نشان می دهد که بدون توجه به فضای کسب و کار و حمایت از آن نمی توان انتظار بهبود اقت چکیده کامل
        بهبود فضای کسب و کار و رفع موانع و مشکلات مرتبط با آن امری حیاتی در راستای توسعه اقتصادی می باشد. فضای کسب و کار نیازمند توجه و حمایت و برنامه ریزی ویژه می باشد. تجربه کشورهای توسعه یافته نشان می دهد که بدون توجه به فضای کسب و کار و حمایت از آن نمی توان انتظار بهبود اقتصادی و رونق کسب و کارها و در نهایت توسعه پایدار را داشت، فضای کسب و کار در کشور ما نیز از این قاعده مستثنی نبوده و توجه جدی به آن و تلاش جهت بهبود فضای کسب و کار امری ضروری می باشد. یکی از راهکارهای موثر جهت بهبود فضای مذکور و شاید اصلی ترین راهکار، ایجاد و راه اندازی پنجره واحد شروع کسب و کار است که در کشورهای دیگر نیز تجربه شده است. در ایران نیز راه اندازی پنجره واحد شروع کسب و کار به عنوان یک راهکار جهت بهبود این فضا در دستور کار قرار گرفت و از سال 1398 اجرایی گردید. نوشتار پیش رو تلاش دارد تا با بررسی دلایل و ضرورت های ایجاد چنین فضایی ضمن تجزیه و تحلیل مستندات مربوطه و چگونگی راه اندازی آن، راهکارهایی را هم جهت بهبود هر چه بهتر آن ارائه نماید. پرونده مقاله
      • دسترسی آزاد مقاله

        139 - نقش خبر واحد در حوزه علم اصول و اصول تفسیر با رویکردی بر آراء امام خمینی ( ره )
        مرجانه مهدی زاده سید محمد موسوی بجنوردی
        چکیده بحث پیرامون حجیت خبر واحد و به تبع آن حجیت خبر واحد تفسیری از مباحث مهم و بحث بر انگیز ، در حوزه علم اصول و اصول تفسیر است ، که از قدمت بسیاری برخوردار بوده و مباحث و آراء متعددی پیرامون آن بیان شده است ، بحث از حجیت خبر واحد و عدم ان در علم اصول می تواند بر فتاوا چکیده کامل
        چکیده بحث پیرامون حجیت خبر واحد و به تبع آن حجیت خبر واحد تفسیری از مباحث مهم و بحث بر انگیز ، در حوزه علم اصول و اصول تفسیر است ، که از قدمت بسیاری برخوردار بوده و مباحث و آراء متعددی پیرامون آن بیان شده است ، بحث از حجیت خبر واحد و عدم ان در علم اصول می تواند بر فتاوای یک مجتهد تاثیر گذار باشد چنانچه بحث از حجیت خبر واحد تفسیری از آن جهت که در تفسیر حجیت دارد یا خیر می تواند در مبنای مفسر تأثیر گذار باشد ؛کسانی که حجیت خبر واحد را به دلیل تعبدی و سیره عقلاء می پذیرند از منابع بیشتری در تفسیر برخوردار هستند و دست باز تری در تفسیر آیات قرآن دارند تا کسانی که حجیت خبر واحد را نمی پذیرند. مرحوم امام خمینی ( ره ) در مباحث اصولی و فقه الحدیثی خود ضمن قبول حجیت خبر واحد بر اساس سیره عقلاء، در مورد حجیت خبر واحد تفسیری ، آراء و نظرات مختلفی دارند که با بررسی دیدگاه های ایشان به دنبال آن هستیم تا دیدگاه ایشان را در این زمینه مطرح و نتیجه گیری نماییم .واژگان کلیدی : حجیت ، خبر واحد ، روایات تفسیری ، سیره عقلاء ، پرونده مقاله
      • دسترسی آزاد مقاله

        140 - بررسی جایگاه آیه نبأ و نفر در حجیت خبر واحد در پرتو سیره عقلا
        مرجانه مهدی زاده سید محمد موسوی بجنوردی
        بی تردید از مهمترین منابع احکام و شریعت روایات معصومین علیهم السلام می باشد و از آنجا که بیشترین این روایات به نحو خبر واحد به دست ما رسیده است توجه به این دسته از روایات و سخناز چگونگی حجیت آنها از اهمیت وافری برخوردار است ؛ از جمله راههای بررسی حجیت این دستهاز روایات چکیده کامل
        بی تردید از مهمترین منابع احکام و شریعت روایات معصومین علیهم السلام می باشد و از آنجا که بیشترین این روایات به نحو خبر واحد به دست ما رسیده است توجه به این دسته از روایات و سخناز چگونگی حجیت آنها از اهمیت وافری برخوردار است ؛ از جمله راههای بررسی حجیت این دستهاز روایات استفاده از ادله تعبدی ( آیات و روایات ) است ، از مهمترین این آیات آیات (نبأ) و (نفر)می باشد . ما در اینجا برآنیم به این آیات با تکیه بر سیره عقلا در بحث از حجیت خبر واحد بپردازیم و با توجه به اینکه بعضی از دانشمندان معاصر بر این نظر هستند که در بررسی حجیت خبر واحد از جنبه سیره عقلا امکان پذیر بوده و نقش شارع در این زمینه امضای آن است ، این آیات را از این جهت مورد بررسی قرار می دهیم .کلید واژه ها : سیره عقلا ، حجیت ، خبر واحد ، پرونده مقاله
      • دسترسی آزاد مقاله

        141 - کارآمدی آموزش چند مولفه ای دیکته نویسی در اختلال یادگیری اختصاصی دیکته: طرح آزمایشی تک آزمودنی
        حمیدرضا حسن‌آبادی راضیه طیبی پروین کدیور
        نارساخوانی یا آسیب واژگانی اختلالی است که خواندن و دیکته را تحت‌تأثیر قرار می‌دهد، اگرچه دیکته ضعیف اغلب به‌عنوان شاخص نارسا خوانی توصیف می‌شود.توجه پژوهشگران عمدتاً به مداخلات به‌موقع در خواندن معطوف شده و تأکید قابل مقایسه و برابر بر مداخلات به‌موقع در دیکته مورد غفلت چکیده کامل
        نارساخوانی یا آسیب واژگانی اختلالی است که خواندن و دیکته را تحت‌تأثیر قرار می‌دهد، اگرچه دیکته ضعیف اغلب به‌عنوان شاخص نارسا خوانی توصیف می‌شود.توجه پژوهشگران عمدتاً به مداخلات به‌موقع در خواندن معطوف شده و تأکید قابل مقایسه و برابر بر مداخلات به‌موقع در دیکته مورد غفلت قرار گرفته است.هدف این پژوهش، بررسی کارآمدی یک آموزش چندمؤلفه‌ایِ دیکته در4دانش‌آموزِ دارای اختلال یادگیری ویژه در یک طرح تک‌آزمودنیِABAبود.آموزش در قالب12جلسه ارائه شد و داده‌ها با استفاده از تحلیل دیداری و روش‌های کمّی با بهره‌گیری از نرم‌افزارRتحلیل شد.تحلیل ناهمپوشانیِ همه جفت‌ها(NAP)، افزایش معنادار در عملکرد دیکته4شرکت‌کننده نسبت به خط پایه را نشان داد.همچنین، یافته‌ها کاهش معناداری در عملکرد شرکت‌کنندگان بین مرحله مداخله و مرحله بازگشتی را نشان ندادند.به نظر می‌رسد یافته‌های این پژوهش پیشرو، نویدبخش ارائه روی‌آوردی چندمؤلفه‌ای به درمانِ نقص چندمؤلفه‌ای در اختلال یادگیری ویژه باشد. پرونده مقاله
      • دسترسی آزاد مقاله

        142 - خانواده درمانگری شناختی ـ رفتاری در درمان بیماران مبتلا به دردهای عضلانی استخوانی
        محمد خدایاری فرد
        کارایی خانواده درمانگری شناختی ـ رفتاری در درمان اختلالهای روان‌تنی از نوع عضلانی، با استفاده از یک طرح تک آزمودنی از نوع A-B مورد بررسی قرار گرفت. تعداد 3 نفر (2 مرد و 1 زن) مبتلا به اختلال روان ـ تنی عضلانی استخوانی (کمردرد و گردن درد) که به یک کلینیک خصوصی روان درمان چکیده کامل
        کارایی خانواده درمانگری شناختی ـ رفتاری در درمان اختلالهای روان‌تنی از نوع عضلانی، با استفاده از یک طرح تک آزمودنی از نوع A-B مورد بررسی قرار گرفت. تعداد 3 نفر (2 مرد و 1 زن) مبتلا به اختلال روان ـ تنی عضلانی استخوانی (کمردرد و گردن درد) که به یک کلینیک خصوصی روان درمانگری ارجاع شده بودند، به عنوان گروه نمونة این پژوهش انتخاب شدند. پس از مصاحبة بالینی روان درمانگر، آزمودنیها به آزمونهای MMPI و SCL-90-R پاسخ دادند و سپس روش خانواده‌درمانگری شناختی ـ رفتاری در مورد آنها اجرا شد. نتایج آزمودنیها در پس آزمون کارایی بالای این روش درمانگری در حل تعارضها و مشکلات بین فردی از طریق آموزش مهارتهایی مانند حل مسأله، برقراری ارتباط مؤثر، مقابلة کارآمد و جرأت‌ورزی را نشان داد. پیشنهاد می‌شود در پژوهشهای بعدی کارآیی سایر روشهای درمانگری از جمله دارودرمانگری، رفتاردرمانگری و شناخت‌درمانگری فردی و گروهی بررسی و با یکدیگر مقایسه شود. پرونده مقاله
      • دسترسی آزاد مقاله

        143 - Design of a PID-PSS Power System Stabilizer for Single-Machine Infinite-Bus Power System
        Mehdi Mahdavian Ali Asghar Amini Mahnaz Hashemi
        Power system stabilizer (PSS) generates electrical torques by applying a signal to the excitation system, which reduces power oscillations. The PSS&rsquo;s main function is to damp generator rotor oscillations. In this paper, the structure of a PSS based on PID controll چکیده کامل
        Power system stabilizer (PSS) generates electrical torques by applying a signal to the excitation system, which reduces power oscillations. The PSS&rsquo;s main function is to damp generator rotor oscillations. In this paper, the structure of a PSS based on PID controller for system stability enhancement is presented. The voltage regulator excitation system is equipped with IEEE type-DC1exciter model. The application of the controller is investigated by means of simulation studies on a single machine infinite bus power system. For the system without any PSS and the system with conventional PSS (CPSS) and proportional-integral-derivative PSS (PID-PSS), the system responses for three different conditions were obtained using equations linear simulation. Eigenvalue analysis is used for comparison. The simulation results show that the controller is effective in improving steady state and dynamic performances regardless of the system operating conditions. پرونده مقاله
      • دسترسی آزاد مقاله

        144 - شبیه سازی فرآیند تولید پروتئین های تک یاخته از قارچ آسپرژیلوس نایجر بر اساس مدل های سینتیکی غیر ساختاری
        فاطمه اردستانی رکسانا کاسب کار
        سابقه و هدف: طراحی فرآیندهای تولید پروتئین های تک یاخته مستلزم تعیین الگوهای رشد میکروارگانیسم های تولید کننده می باشد. این مطالعه با هدف ارزیابی تولید پروتئین های تک یاخته قارچ آسپرژیلوس نایجر و شبیه سازی تولید توده سلولی بر اساس چند مدل غیر ساختاری انجام شد. مواد و ر چکیده کامل
        سابقه و هدف: طراحی فرآیندهای تولید پروتئین های تک یاخته مستلزم تعیین الگوهای رشد میکروارگانیسم های تولید کننده می باشد. این مطالعه با هدف ارزیابی تولید پروتئین های تک یاخته قارچ آسپرژیلوس نایجر و شبیه سازی تولید توده سلولی بر اساس چند مدل غیر ساختاری انجام شد. مواد و روش ها: در این مطالعه آزمایشی تولید پروتئین های تک یاخته در کشت غوطه ور ناپیوسته با فرمولاسیون بهینه محیط کشت در دمای 25 درجه سلیسیوس، 6 pH و سرعت همزدن 300 دور در دقیقه به مدت 200 ساعت در انکوباتور شیکردار انجام شد. در پایان فرآیند، محتویات فلاسک ها به عنوان نمونه برای اندازه گیری غلظت گلوکز، وزن خشک توده سلولی و درصد پروتئین در توده سلولی استفاده شد. یافته ها: شبیه سازی نتایج با مدل مونود به طور متوسط دارای 92 درصد و برای مدل های موزر و لجستیک به ترتیب 63 و 83 درصد تطابق بودند. با افزایش pH از 3.5 به 6، محتوی پروتئین توده سلولی، 71 درصد افزایش یافت. در دامنه های pH بالاتر از 6 محتوی پروتئین توده سلولی کاهش یافت و در 7.5 pH به میزان 29 درصد کمتر شد. افزایش غلظت اولیه گلوکز از 10 تا 50 گرم در لیتر، تاثیر قابل توجهی بر محتوی پروتئین توده سلولی نداشت. همچنین در محیط کشت محتوی 50 گرم در لیتر گلوکز، محتوی پروتئین در توده سلولی تنها 5.67 درصد بیشتر از محیط کشت با 10 گرم در لیتر گلوکز بود. نتیجه گیری: با توجه به نتایج به دست آمده در این مطالعه، مدل سینتیکی مونود به عنوان یک مدل مناسب برای شبیه سازی رفتار قارچ آسپرژیلوس نایجر پیشنهاد می گردد.pH محیط کشت بر محتوی پروتئین های تک یاخته در توده سلولی موثر است. اما غلظت اولیه گلوکز در محیط کشت قارچ، تاثیری بر میزان تولید پروتئین های تک یاخته ندارد. پرونده مقاله
      • دسترسی آزاد مقاله

        145 - تعریف ابن‌سینا از مادی و مجرد و پیامدهای آن بر معاد جسمانی او
        فاطمه ستارزاده محمدعلی اخگر عباس احمدی سعدی
        در میان فلاسفه مسلمان، ابن‌سینا نگاه مهمی به مسالۀ مادی و مجرد داشته است. او طبق نظریۀ فیض خود که اعتقاد به قوس نزول و صعود دارد، قائل به فیاضیت واجب‌&lrm;الوجود به همۀ موجودات اعم از مادی و مجرد می‌باشد. اندیشۀ وی در نوع ارتباط مادی و مجرد و نحوۀ تاثیرگذاری و تاثیرپذیر چکیده کامل
        در میان فلاسفه مسلمان، ابن‌سینا نگاه مهمی به مسالۀ مادی و مجرد داشته است. او طبق نظریۀ فیض خود که اعتقاد به قوس نزول و صعود دارد، قائل به فیاضیت واجب‌&lrm;الوجود به همۀ موجودات اعم از مادی و مجرد می‌باشد. اندیشۀ وی در نوع ارتباط مادی و مجرد و نحوۀ تاثیرگذاری و تاثیرپذیری این دو مفهوم از یکدیگر به‌گونه‌ای است که او به عجز در اثبات معاد جسمانی رسیده و آن را به شریعت واگذار کرده است. وی براساس جهان‌شناسی مشایی خود که موجودات را به مجرد و مادی تقسیم می‌کند، به این نتیجه می‌رسد که معاد جسمانی برهان‌پذیر نیست و باید به قول نبی اعتماد کرد. سوال اصلی این است که مفهوم مادی و مجرد در فلسفۀ ابن‌سینا چه پیامدهایی بر نفس‌شناسی و معادشناسی او دارد. پژوهش حاضر درصدد آن است تا با بررسی تعریف این دو مفهوم پیامدهای آن‌ها را در فلسفۀ ابن‌سینا روشن سازد و در پی آن شیخ الرئیس با این دو مفهوم معاد جسمانی را غیرقابل اثبات برهانی می‌داند. پرونده مقاله
      • دسترسی آزاد مقاله

        146 - "آینده نظم بین الملل در افق 2030 میلادی"
        علی اصغر نعیمی امیر هوشنگ میر کوشش علی محمدزاده
        چکیده بازیگران نظام بین‌الملل همواره پیش‌بینی آینده را امری لازم می‌دانند تا بلکه از این راه، هم کنش‌ها و هم واکنش‌های خود را تعیین کنند و هم مختصات آتی نظام جهانی را با هدف حفظ امنیت و منافع خود، مورد شناسایی قرار دهند. بنا به اذعان اندیشمندان روابط بین‌الملل پس از فرو چکیده کامل
        چکیده بازیگران نظام بین‌الملل همواره پیش‌بینی آینده را امری لازم می‌دانند تا بلکه از این راه، هم کنش‌ها و هم واکنش‌های خود را تعیین کنند و هم مختصات آتی نظام جهانی را با هدف حفظ امنیت و منافع خود، مورد شناسایی قرار دهند. بنا به اذعان اندیشمندان روابط بین‌الملل پس از فروپاشی اتحاد جماهیر شوروی، جهان عملاً به صورت تک‌ قطبی اداره شده و علی‌رغم حضور چین، روسیه و اتحادیه اروپا در برخی از رقابت‌های جهانی، هنوز هژمونی واشنگتن پا برجاست. نوشتار پیش‌رو در پاسخ به پرسش آینده نظم بین‌الملل در افق 2030 میلادی چگونه خواهد بود؟ تلاش کرده تا بر مبنای نظریه بازی‌ها نظم جهانی را پیش‌یینی کند. نگارندگان با بهره‌گیری از روش سناریوپردازی استدلال کرده‌اند که با توجه به تلاش مداوم دولت‌های پیش‌گفته و بازیگران جدیدی مانند هند و برزیل برای کسب قدرت در حوزه‌های سیاسی، اقتصادی، فرهنگی و نظامی &ndash; امنیتی، نظم جهانی دچار تغییر خواهد شد. از سوی دیگر تلاشهای ایالات متحده آمریکا برای صیانت از هژمونی خود، سبب خواهد شد تا این بازیگر همچنان محوریت کانونی خود را حفظ نماید، در نتیجه می‌توان‌گفت نظام تک قطبی فعلی به نظام تک &ndash; ‌چندقطبی با محوریت کانونی فوق و چند کانون تاثیرگذار (چین، روسیه، اتحادیه اروپا، هند و برزیل) تغییر خواهد یافت. پرونده مقاله
      • دسترسی آزاد مقاله

        147 - Improving the Transient Stability of Power Systems Using STATCOM and Controlling it by Honey Bee Mating Optimization Algorithm
        Ebadollah Amouzad Mahdiraji Seyed Mohammad Shariatmadar
        In this study, a new method for designing the damping controller was proposed to improve the transient power system stability in a single machine network connected to an infinite bus. The STATCOM controller problem in a wide area of the system function was considered as چکیده کامل
        In this study, a new method for designing the damping controller was proposed to improve the transient power system stability in a single machine network connected to an infinite bus. The STATCOM controller problem in a wide area of the system function was considered as an optimization problem with multi-purpose objective function. Also, the Honey Bee Mating Optimization Algorithm was used to determine its parameters. In this paper, a new method for designing a damping controller was presented to improve the transient power system stability in a single machine network connected to an infinite bus. The STATCOM controller design problem in a wide area of system function was considered as an optimization problem with a multi-purpose objective function and the honey bee mating optimization algorithm was used to determine its parameters. As shown, STATCOM improved system stability. For a more comprehensive analysis, the results were tested in three different scenarios. Simulation of the STATCOM controller design for small signal stability was conducted in the MATLAB / SIMULINK environment. The tuning variables in designing the controller were variables c and &phi; that were used to adjust the modulation index and firing angle of switches. In order to achieve the best possible state, the artificial honey bee colony algorithm was used. پرونده مقاله
      • دسترسی آزاد مقاله

        148 - A Smart Noise-Coupling Technique for low power DT-Σ∆ Modulators
        Habibeh Fakhraie Tohid Moosazadeh Reza Sabbaghi-nadooshan Alireza Hassanzadeh
        In this paper, a new method for extending and relaxing the noise-coupling (NC) technique is proposed to enhance the noise-shaping order without adding the number of integrators. The noise-shaping order of the introduced &sum;∆ modulator whit applying a second-order nois چکیده کامل
        In this paper, a new method for extending and relaxing the noise-coupling (NC) technique is proposed to enhance the noise-shaping order without adding the number of integrators. The noise-shaping order of the introduced &sum;∆ modulator whit applying a second-order noise-coupling technique is enhanced and its performance with optimizing the noise transfer function (NTF) zeros is improved. Also, by removing the analog adder at feedforward path and transferring it to a new feedback branch before the last integrator and adding second-order NC path can be decreased the input voltage swing to the quantizer. Thus, by improving the modulator resolution, power consumption can be reduced. Mathematical analyses and behavioural simulation results confirm the effectiveness of the new NC method. To examine its performance, a 2nd-order single loop &Sigma;&Delta; modulator was designed. The new noise-coupling method is used to achieve the three-order noise shaping to increase the resolution with low complexity and low-power. The results show an outstanding improvement in signal-to-noise and distortion ratio (SNDR) compared to the conventional structure. پرونده مقاله
      • دسترسی آزاد مقاله

        149 - Indirect Control of Single-Phase Active Power Filters using Harmonic Control Arrays
        Mohammad-Sadegh Karbasforooshan Mohammad Monfared Murat Dogruel
        The ever increase of nonlinear loads in electric distribution networks causes many problems due to the high level of harmonic currents. This paper proposes a new technique for controlling a single phase shunt active power filter based on a selective compensation using t چکیده کامل
        The ever increase of nonlinear loads in electric distribution networks causes many problems due to the high level of harmonic currents. This paper proposes a new technique for controlling a single phase shunt active power filter based on a selective compensation using the newly developed technique of harmonic control arrays. Simulation results confirm the appropriate selective harmonic compensation performance under different operating conditions. پرونده مقاله
      • دسترسی آزاد مقاله

        150 - فهم پدیدار شناسانه تجارب زیسته جوانان مجرد از شیوه جدید دیدن و دیده شدن
        مرضیه شهریاری نجمه مطیعی تبار
        هدف از پژوهش حاضر، واکاوی تجربه زیسته جوانان و معناهای برآمده از دنیای ذهنی آناناز زندگی مجردی است. مطابق با روش پدیدارشناسی و زمینه تحقیق از مصاحبه عمیق استفاده گردید. جامعه آماری در این پژوهش، جوانان مجرد بالای 30 سال شهر اهواز است. پژوهش با روش نمونه گیری هدفمند و با چکیده کامل
        هدف از پژوهش حاضر، واکاوی تجربه زیسته جوانان و معناهای برآمده از دنیای ذهنی آناناز زندگی مجردی است. مطابق با روش پدیدارشناسی و زمینه تحقیق از مصاحبه عمیق استفاده گردید. جامعه آماری در این پژوهش، جوانان مجرد بالای 30 سال شهر اهواز است. پژوهش با روش نمونه گیری هدفمند و با استفاده از ابزار مصاحبه نیمه ساختار یافته تا رسیدن به اشباع نظری ادامه یافت. نتایج پژوهش بیانگر آن است کهبی توجهی به ارزش ها در مهارت‌های گزینش، تمایل به آزادی، ترس از صدمه دیدن در نگاه جدید، داشتن اولویت‌های متفاوت، عادت به روزمرگی، بازاندیشی تعاملات جنسی و جسارت ورزی های جنسی بود. به طور خاص، مردان، تنهایی، رهاشدگی و انزوایی که حاصل از حرکت در خلاف مسیر پذیرفته شده جامعه است را در درون خود، احساس می کنند و خود را متعلق به داشته های اجتماعی و فرهنگی جامعه خویش نمی داند و بدون توجه به ارزش ها، اقدام به تصمیم برای تعیین تکلیف خویش می‌کنند، در حالی که زنان برای جلوگیری از آسیب دیدن بدنبال ادراک شیوه جدیدی از دیده شدن در فضای مجازی و تعاملات جنسی جهت انتخاب شدن می باشند. پرونده مقاله
      • دسترسی آزاد مقاله

        151 - پیش بینی شاخص کل بورس اوراق بهادارتهران با استفاده از روش تحلیل طیفی تکین و الگوریتم ژنتیک
        زهرا حسن دوست حمیدرضا وکیلی فرد
        نوسانات در بازارهای مالی با سیگنال و نویز همراه می‌باشد. در این مقاله علاوه بر تجزیه‌وتحلیل طیفی تکین، برای پیدا کردن طول پنجره و نقطه برش بهینه از الگوریتم ژنتیک استفاده‌شده است که تابع هدف آن، یافتن حداقل مقدار برای تابع همبستگی میان مؤلفه‌های سیگنال و نویز می‌باشد. ب چکیده کامل
        نوسانات در بازارهای مالی با سیگنال و نویز همراه می‌باشد. در این مقاله علاوه بر تجزیه‌وتحلیل طیفی تکین، برای پیدا کردن طول پنجره و نقطه برش بهینه از الگوریتم ژنتیک استفاده‌شده است که تابع هدف آن، یافتن حداقل مقدار برای تابع همبستگی میان مؤلفه‌های سیگنال و نویز می‌باشد. بدین خاطر ابتدا دادهای ده‌ساله شاخص کل بورس اوراق بهادار تهران طی سال‌های 1388 تا 1397 با استفاده از روش تجزیه طیفی تکین در سه پیاده‌سازی شد. سپس در قالب یک مسئله بهینه‌سازی توسط الگوریتم ژنتیک حل شد. نتایج حاصل از فرضیه اول نشان داد که تفکیک‌پذیری سیگنال و نویز درروش تحلیل طیفی تکین امکان‌پذیر می‌باشد. هم‌چنین با توجه به نتایج حاصل در تحقیق، تحلیل طیفی تکین مبتنی بر الگوریتم ژنتیک با داشتن خطای قدر مطلق میانگین کمتر، بهبود در دقت پیش‌بینی را نشان داد. درنهایت نیز با توجه به یافتن کمترین همبستگی وزنی بین مؤلفه‌های سری زمانی جهت تفکیک سیگنال و نویز (یافتن نقطه‌ی برش) و سپس با دست آوردن طول پنجره‌ی بهینه در تحلیل طیفی تکین مبتنی بر الگوریتم ژنتیک، گویای این واقعیت است که تغییر در مقدار پارامترها می‌تواند در بهبود عملکرد روش تحلیل طیفی مفید واقع شود. پرونده مقاله
      • دسترسی آزاد مقاله

        152 - تقویت استراتژی سرمایه گذاری مومنتوم: استفاده از اهرم، بیش‌اهرمی و کم‌اهرمی و نرخ رشد دارائی‌ها
        داود شهبازی احمد یعقوب نژاد غلامرضا زمردیان مهدی معدن چی زاج شادی شاهوردیانی
        تصمیم‌گیری‌های سرمایه‌گذاری بر اساس مفاهیم مالی مورد بررسی قرار می‌گیرند که بر مبنای فرضیه بازار کارا استوار هستند. با توجه به تایید عدم کارایی کامل بازار سرمایه ‌ایران، انتظار کسب بازده‌های بیشتر وجود دارد. در این تحقیق با مبنا قراردادن استراتژی سرمایه‌گذاری مومنتوم (ک چکیده کامل
        تصمیم‌گیری‌های سرمایه‌گذاری بر اساس مفاهیم مالی مورد بررسی قرار می‌گیرند که بر مبنای فرضیه بازار کارا استوار هستند. با توجه به تایید عدم کارایی کامل بازار سرمایه ‌ایران، انتظار کسب بازده‌های بیشتر وجود دارد. در این تحقیق با مبنا قراردادن استراتژی سرمایه‌گذاری مومنتوم (که توان کسب بازدهی آن در مطالعات مختلف تایید گردیده) و ترکیب آن با سایر عوامل موثر در ارزش شرکت و کسب بازده، به دنبال معرفی سبدهای سرمایه‌گذاری هستیم. بر این اساس تعداد 119 شرکت در بازه زمانی 1388 تا 1400 در سه دوره کوتاه مدت سه و شش ماهه و میان مدت یک ساله مورد بررسی قرار گرفت. بر اساس یافته‌ها میانگین بازده به دست آمده از تشکیل پرتفوی‌های مختلف ترکیبی در همه دوره‌ها مثبت و بازده سبدهای ترکیبی از سبدهای تک معیاره بالاتر بوده‌اند. راهبرد سرمایه‌گذاری مبتنی بر نرخ رشد دارائی‌ها و مومنتوم در دوره‌های کوتاه مدت سه و شش ماهه و میان مدت یک ساله دارای بیشترین میانگین بازدهی و سپس راهبرد متنبی بر بیش‌اهرمی و کم‌اهرمی و مومنتوم و نهایتاً راهبرد مبتنی بر اهرم و مومنتوم بیشترین میانگین بازدهی را در طی دوره مورد بررسی داشتند. پرونده مقاله
      • دسترسی آزاد مقاله

        153 - مدلسازی و ارزیابی پیش‌بینی مدل‌های مختلف حافظه کوتاه مدت، حافظه بلندمدت، مارکوف سوئیچینگ و هایپربولیک گارچ در پیش‌بینی نوسانات قیمت نفت خام اوپک
        محمود محمدی الموتی محمدرضا حدادی یونس نادمی
        پیش‌بینی در بازارهای مالی بسیار پیچیده است و دلایل این پیچیدگی را می‌توان به مواردی چون نا‌ایستایی داده‌ها، غیرخطی بودن روند داده‌ها و تغییرات زیاد داده‌ها خلاصه کرد. تعیین الگوی مناسب جهت پیش‌بینی نوسانات می‌تواند در راستای تصمیم‌گیری نقش بسزایی ایفا کند. در مدل‌های اق چکیده کامل
        پیش‌بینی در بازارهای مالی بسیار پیچیده است و دلایل این پیچیدگی را می‌توان به مواردی چون نا‌ایستایی داده‌ها، غیرخطی بودن روند داده‌ها و تغییرات زیاد داده‌ها خلاصه کرد. تعیین الگوی مناسب جهت پیش‌بینی نوسانات می‌تواند در راستای تصمیم‌گیری نقش بسزایی ایفا کند. در مدل‌های اقتصاد سنجی قدیمی، فرض بر این است که پراکندگی جزء اختلال در کل دورۀ زمانی نمونه ثابت می‌باشد. اما در بسیاری از سری‌های زمانی مالی مشاهده می‌شود که در دوره‌هایی نوسانات بسیار شدید می‌باشد. با این شرایط، فرض وجود همسانی واریانس دیگر معقول به نظر نمی‌رسد. در مقاله حاضر مدل‌های تک رژیمی GARCH، IGARCH، EGARCH، GJR-GARCH، FIEGARCH، HYGARCH و مدل دو رژیمی MRS-GARCHدر پیش‌بینی نوسانات قیمت نفت اوپک در طی سالهای 2010 الی 2016 مورد ارزیابی قرار گرفته و بر اساس معیار خطای RMSEدقت عملکرد آن‌ها سنجیده شده است. نتایج حاصل از این ارزیابی نشان از برتری مدل دو رژیمی مارکوف سوئیچینگ گارچ در افق‌های 5 و 22 روزه دارد. همچنین مدل حافظه بلند مدت FIEGARCHدر افق‌های پیش‌بینی 1 و 10 روزه از عملکرد بهتری در پیش‌بینی نوسانات قیمت نفت نسبت به سایر مدل‌های رقیب برخوردار می‌باشد. پرونده مقاله
      • دسترسی آزاد مقاله

        154 - An algebraic perspective on neutrosophic sets: fields and linear spaces
        V. Cetkin B. Pazar Varol H. Aygun
        In this work, we intend to introduce and study another algebraic structure of single-valued neutrosophic sets called neutrosophic field as a continuation of our investigations on neutrosophic algebraic structures. For this goal, we define the concept of neutrosophic fie چکیده کامل
        In this work, we intend to introduce and study another algebraic structure of single-valued neutrosophic sets called neutrosophic field as a continuation of our investigations on neutrosophic algebraic structures. For this goal, we define the concept of neutrosophic fields and observe some of their basic characteristics and properties. Then we give the definition of a neutrosophic linear space over the proposed neutrosophic field and consider its fundamental properties. پرونده مقاله
      • دسترسی آزاد مقاله

        155 - ‎U‎sing Fuzzy Interest ‎Rates for Uncertainty‎ Modelling in Enhanced Annuities Pricing
        Mahboubeh Aalaei
        The modeling of uncertainty resources&lrm;&lrm; is very &lrm;important in &lrm;insurance pricing&lrm;&lrm;. &lrm;In this paper&lrm;, &lrm;fuzzy set theory is implemented to model &lrm;interest &lrm;rates &lrm;as &lrm;an &lrm;uncertainty &lrm;resources&lrm; for calculati چکیده کامل
        The modeling of uncertainty resources&lrm;&lrm; is very &lrm;important in &lrm;insurance pricing&lrm;&lrm;. &lrm;In this paper&lrm;, &lrm;fuzzy set theory is implemented to model &lrm;interest &lrm;rates &lrm;as &lrm;an &lrm;uncertainty &lrm;resources&lrm; for calculating the price of &lrm;enhanced &lrm;annuities. In this regard, &lrm;t&lrm;he &lrm;single &lrm;fuzzy&lrm; &lrm;premium &lrm;for a&lrm; &lrm;fixed &lrm;annuity &lrm;payouts &lrm;is &lrm;calculated &lrm;using&lrm;&lrm;&lrm; &lrm;adjusted &lrm;mortality &lrm;probabilities &lrm;for &lrm;an &lrm;insured &lrm;with &lrm;health &lrm;problems &lrm;and &lrm;the &lrm;results &lrm;are&lrm; &lrm;compared &lrm;with &lrm;standard &lrm;status. &lrm;As the &lrm;adjustment &lrm;multiplier&lrm;&lrm;&lrm; increases, which means that the health problems of the insured are worse, the life expectancy of the person decreases. In addition, as adjustment &lrm;multiplier&lrm;&lrm;&lrm; increases, the insurance premium decreases, which is due to the adjustment of survival and mortality probabilities based on the individual's health status&lrm;. Also, to show the validity of the &lrm;proposed&lrm; fuzzy method, the random interest rate has been used. The results of the &lrm;fuzzy &lrm;and &lrm;random&lrm; models are close to each other &lrm;which indicates the validation of proposed method&lrm;. پرونده مقاله
      • دسترسی آزاد مقاله

        156 - ANALYSIS OF RENEWAL INPUT STATE DEPENDENT VACATION QUEUE WITH $N$-POLICY
        Vijaya Laxmi Pikkala Suchitra Vepada
        This paper analyzes renewal input state dependent queuewith $N$- policy wherein the server takes exactly one vacation.Using the supplementary variable technique and recursive method,we derive the steady state system length distributions at various epochs.Various perform چکیده کامل
        This paper analyzes renewal input state dependent queuewith $N$- policy wherein the server takes exactly one vacation.Using the supplementary variable technique and recursive method,we derive the steady state system length distributions at various epochs.Various performance measures has been presented. Finally, some numericalcomputations in the form of graphs are presented to show the parametereffect on various performance measures. پرونده مقاله
      • دسترسی آزاد مقاله

        157 - مقایسه انگیزش تحصیلی، شایستگی اجتماعی و هویت تحصیلی فرزندان خانواده‌های تک والدی و خانواده‏های هسته‌ای
        راحله شکوهی لیلا بیژنی کشکک فاطمه خزائی پول
        هدف مطالعه‌ی حاضر، بررسی مقایسه انگیزش تحصیلی، شایستگی اجتماعی و هویت تحصیلی فرزندان خانواده های تک والدی و خانواده های هسته ای بود. این مطالعه به صورت مقطعی- مقایسه ا ی با روش نمونه گیری هدفمند روی 50 دانش آموز دختر دارای خانواده هسته ای و 50 دانش آموز تک والد همتا شد چکیده کامل
        هدف مطالعه‌ی حاضر، بررسی مقایسه انگیزش تحصیلی، شایستگی اجتماعی و هویت تحصیلی فرزندان خانواده های تک والدی و خانواده های هسته ای بود. این مطالعه به صورت مقطعی- مقایسه ا ی با روش نمونه گیری هدفمند روی 50 دانش آموز دختر دارای خانواده هسته ای و 50 دانش آموز تک والد همتا شده به لحاظ سن انتخاب شدند. ابزارهای به کار گرفته شده پرسشنامه انگیزش تحصیلی مدرسه(ISM) مک اینرنی و سینکلایر(1992)، پرسشنامه چندبعدی شایستگی اجتماعی (AMSC-Q) گومز-اورتیز و همکاران(2017) و پرسشنامه منزلت های هویت تحصیلی(AISQ) واز و ایزاکسون(2008) بوده است. در مطالعه حاضر، از تحلیل واریانس چندمتغیره(مانووا) برای تجزیه و تحلیل اطلاعات استفاده شده است. نتایج تحلیل واریانس چندمتغیره نشان داد که بین انگیزش تحصیلی، شایستگی اجتماعی و هویت تحصیلی در بین فرزندان خانواده های تک والدی و خانواده های هسته ای تفاوت وجود دارد؛ به این صورت که فرزندان خانواده های تک والدی دارای نمرات کمتری در انگیزش تحصیلی، شایستگی اجتماعی و هویت تحصیلی(موفق) نسبت فرزندان خانواده های هسته ای هستند. همچنین نتایج نشان دهنده آن است که فرزندان خانواده های تک والدی دارای نمرات بیشتری در هویت تحصیلی (دیررس، سردرگم و دنباله رو) نسبت فرزندان خانواده های هسته ای هستند. این نتایج تلویحات مهمی از ساختار خانواده برای کارکردهای تحصیلی فرزندان شان دارد. بر این اساس، روانشناسان تربیتی و مشاوران تحصیلی می‌توانند از نتایج پژوهش حاضر، برای بهبود مشکلات تحصیلی فرزندان تک والدبهره مند شوند. پرونده مقاله
      • دسترسی آزاد مقاله

        158 - DFT/NBO Analysis of Interaction between 4-hydroxycoumarin and Single Walled Carbon Nanotubes in Pistachio
        Azar Bagheri
        Fruits, vegetables, oils, coffee, nuts, and tea contain coumarin. The scientific attraction of coumarins is attributed to their pharmacological activity. In this study, density functional theory (DFT) calculations were performed in the B3LYP/6-31G(d) level of theory to چکیده کامل
        Fruits, vegetables, oils, coffee, nuts, and tea contain coumarin. The scientific attraction of coumarins is attributed to their pharmacological activity. In this study, density functional theory (DFT) calculations were performed in the B3LYP/6-31G(d) level of theory to evaluate the potentialities of single-walled carbon nanotubes (SWCNT) as a carrier for 3-acetyl-6-methyl-4-hydroxy-coumarin. The natural bond orbital (NBO) analysis suggested that the functionalized nanotube plays the role of an electron donor and 3-acetyl-6-methyl -4-hydroxy- coumarin molecule acts as an electron acceptor at the SWCNT -coumarin complex. Variations of density and dipole moment values of coumarin after interaction were studied. Also, the frontier orbital energies, HOMO-LUMO gap, chemical hardness (&eta;), electrophilicity index (&omega;), charge transferred (&Delta;Nmax) and chemical potential (&mu;) were computed. Pure coumarin is less conductive and smoother than SWCNT -coumarin. Our results show efficient coumarin loading with the interaction energy of -1.19 eV. NBO analysis shows that the occupied orbitals in the coumarin and the unoccupied orbitals in the nanotube overlap. پرونده مقاله
      • دسترسی آزاد مقاله

        159 - Evaluation of the Effect of Different Levels of Nitrogen Fertilizer and Cultivar on Morphological Traits on Corn Biomass in Isfahan
        MOHAMMAD BAKHSHIAN HOSSEIN HEIDARI SHARIFABAD
        Mohammad Bakhshian1*, Hossein Heidari Sharifabad2 1- Agriculture University of Jiroft, Kerman, Iran 2- Department of Agriculture (Crop Physiologist), Science and Research University, Branch of Tehran,Iran *Corresponding author Email: m.bakhshian@yahoo.com چکیده کامل
        Mohammad Bakhshian1*, Hossein Heidari Sharifabad2 1- Agriculture University of Jiroft, Kerman, Iran 2- Department of Agriculture (Crop Physiologist), Science and Research University, Branch of Tehran,Iran *Corresponding author Email: m.bakhshian@yahoo.com Received: 2 June 2015 Accepted: 21 June 2015 Abstract To evaluate the effect of different nitrogen fertilizer on morphological properties of biomass of different corn cultivars, a field experiment was performed in a farm located in Kabutarabad area of Esfahan in 2014. Experiment was conducted in split plot design in complete randomized blocks layout with three replications. Different levels of nitrogen fertilizer in four levels of 100, 150, 200 and 250 Kg ha-1 of pure nitrogen from urea source and different varieties SC500, SC604, SC 700 and SC704 were considered as main and sub plots. The highest dry weights of leaf, stem and plant were obtained in 250 Kg N ha-1 treatment. SC704 due to longer growing period had the highest leaf, shoot, and plant dry weights relative to the other single crosses. With regard to sustainable agriculture and optimizing the use of fertilizer it seems under the same conditions of this study SC704 and 250 Kg ha-1 of nitrogen would give the best performance. پرونده مقاله
      • دسترسی آزاد مقاله

        160 - Identification of Bacterial Isolates of Pseudomonas fluorescens siderophore from Rhizosphere of Corn Fields and Evaluation of Iron Absorption by Corn
        Sayed Amin Fani Yazdi Amir Fotovat Amir Lakzian Ali Akbar Haddad Mashhadrizeh
        Iron is one of the most important elements for plant growth and metabolism. Plant growth promoting bacteria such as Pseudomonas fluorescens isolates play an important role in the absorption of iron by plants under iron deficiency by production of microbial siderophore. چکیده کامل
        Iron is one of the most important elements for plant growth and metabolism. Plant growth promoting bacteria such as Pseudomonas fluorescens isolates play an important role in the absorption of iron by plants under iron deficiency by production of microbial siderophore. In this study, 25 bacterial isolates were isolated from corn plants rhizosphere in Khorasan Razavi Province, Iran in 2017. Based on physiological-biochemical and molecular diagnostic methods, by using 16SPSEfluF and 16SPSER specific primers, bacterial isolates were identified as P. fluorescens. Among these isolates, the highest amount of siderophore production was related to the isolate PFD1 and the lowest to the isolate PFD3. Moreover, in the study of iron absorption by corn (Single Cress 704), the highest iron absorption was obtained from PFG5 treatment (283 &Acirc;&plusmn; 2/3 ppm) and the lowest from control treatment (7/1 &Acirc;&plusmn; 6/107 ppm). Isolate PFG5 showed the highest yield increase on fresh and dry weight of root and aerial parts among treatments. PFG5 isolates could be introduced as an effective isolate in iron deficiency conditions. پرونده مقاله
      • دسترسی آزاد مقاله

        161 - Ultra-Trace Determination of Copper and Silver in Environmental Samples by Using Ionic Liquid-Based Single Drop Microextraction-Electrothermal Atomic Absorption Spectrometry
        J. Abolhasani M. Amjadi E. Ghorbani Kalhor
        A sensitive, selective and effective ionic liquid-based single drop microextraction technique wasdeveloped by using ionic liquid, 1-hexyl-3-methylimidazolium hexafluorophosphate, C6MIMPF6, coupledwith electrothermal atomic absorption spectrometry (ETAAS) for the determi چکیده کامل
        A sensitive, selective and effective ionic liquid-based single drop microextraction technique wasdeveloped by using ionic liquid, 1-hexyl-3-methylimidazolium hexafluorophosphate, C6MIMPF6, coupledwith electrothermal atomic absorption spectrometry (ETAAS) for the determination of copper and silver inenvironmental samples. Dithizone was used as chelating agent. Several factors that influence themicroextraction efficiency and ETAAS signal, such as pH, dithizone concentration, extraction time, amounts ofionic liquid, stirring rate, pyrolysis and atomization temperature were investigated and the microextractionconditions were established. In the optimum experimental conditions, the detection limits (3 s) of the methodwere 4 and 8 ng L-1 and corresponding relative standard deviations (0.1 μg L-1, n = 6) were 4.2% and 4.8% forAg and Cu, respectively. The developed method was validated by analysis of a certified reference material andapplied to the determination of silver and copper. پرونده مقاله
      • دسترسی آزاد مقاله

        162 - The Evaluation and Comparison of Single- and Multi-Walled Carbon Nanotubes in the Removal of Heavy Metals from Water
        Seyyedeh Sepideh Feyz Farhad Khamchin Moghadam
        The water scarcity crisis and water pollution are among the key issues both in the current century and in the future. Several different techniques have been introduced for the decontamination of water pollution, among which using the nanotubes is one of the most influen چکیده کامل
        The water scarcity crisis and water pollution are among the key issues both in the current century and in the future. Several different techniques have been introduced for the decontamination of water pollution, among which using the nanotubes is one of the most influential. In this project, the single-walled and multi-walled carbon nanotubeswere employed to test the possibility of removing heavy metal ions, such as Fe2+, Cd2+, Pb2+ and Ni2+. The effects of three factors including carbon nanotubes, ions&rsquo; initial concentration, and contact time were tested. According to the difference rate of nanotubes&rsquo; adsorption diagrams, the maximum differences in the performance of single- and multi-walled are obtained as 30 percent for the initial solution concentration and around 5 percent for Nano adsorbent concentration. The results showed that in the different initial concentrations of metal ions, multi-walled nanotube had a better performance, while in case of changing the amount of adsorbent; the single-walled nanotube had a higher adsorption. And if the time changes, multi-walled carbon nanotube can have a higher adsorption. پرونده مقاله
      • دسترسی آزاد مقاله

        163 - بررسی ریزساختاری تک‌اسپلت آلومینایی ایجاد شده با فرآیند پاشش شعله‌ای سرعت بالای محلول پیش‌ماده
        سعید تقی رمضانی ضیاء والفی
        فرآیندهای پاشش حرارتی محلول پیش ماده (SPTS) روشی مناسب جهت تولید پوشش های با ساختار نانو هستند. به‌واسطه‌ی عدم رخداد کامل واکنش هایی نظیر تبخیر حلال و پیرولیز پیش‌ماده، دستیابی به پوشش های با خواص کنترل‌شده در یک نرخ رسوب دهی رضایت‌بخش کماکان به‌عنوان یک چالش مهم در این چکیده کامل
        فرآیندهای پاشش حرارتی محلول پیش ماده (SPTS) روشی مناسب جهت تولید پوشش های با ساختار نانو هستند. به‌واسطه‌ی عدم رخداد کامل واکنش هایی نظیر تبخیر حلال و پیرولیز پیش‌ماده، دستیابی به پوشش های با خواص کنترل‌شده در یک نرخ رسوب دهی رضایت‌بخش کماکان به‌عنوان یک چالش مهم در این فرآیندها مطرح است که نیاز به کنترل دقیق پارامترهای پاشش دارد. در این تحقیق، به‌منظور بررسی تأثیر پارامترهای پاشش شعله ای سرعت بالای محلول پیش ماده از جمله مقدار سوخت و اکسیژن، فاصله پاشش و نرخ تزریق محلول از آزمون پاشش تک اسکن بر روی زیرلایه های شیشه ای استفاده شد. مورفولوژی اسپلت های تشکیل‌شده و مشخصه های ساختاری با استفاده از میکروسکوپ الکترون روبشی (SEM) بررسی شد. مقایسه ی ساختاری در آزمون پاشش تک اسکن که در دو نسبت سوخت به اکسیژن انجام شد، نشان داد که در پارامتر شعله با فشار اکسیژن bar 6 و سوخت bar 3 در نرخ تزریق محلول پیش‌مادهcm3/min 20 و فاصله پاششcm 5 به عنوان پارامتر بهینه انتخاب شد. در این پارامتر به دلیل پایین بودن نرخ تزریق محلول و انتقال گرمای بیشتر به ازای هر قطره محلول پیش ماده و تکمیل فرآیندهایی که در نتیجه آن ذوب و کریستالی شدن اتفاق می افتد، تعداد اسپلت ها افزایش یافت. همچنین ارزیابی پاشش تک اسکن در شعله با فشار اکسیژن bar 8 و سوخت bar 4 و فاصله پاششcm 5 نشان داد که نرخ تزریق محلول پیش‌مادهcm3/min 40 به دلیل افزایش تعداد اسپلت های ریز و به‌واسطه‌ی بهبود راندمان پوشش دهی مناسب تر خواهد بود. پرونده مقاله
      • دسترسی آزاد مقاله

        164 - مقایسه خواص اکسیداسیون هم‌دما و شوک حرارتی پوشش‌ CoNiCrAlY اعمال‌شده با استفاده از فرایندهای پاشش پلاسمایی اتمسفری و پاشش پلاسمایی تحت گاز محافظ نیتروژن
        بهزاد قاسمی ضیاء والفی سعید تقی رمضانی
        در این پژوهش خواص پوشش اعمال‌شده توسط فرایند پاشش پلاسمایی معمولی و با دوش گاز خنثی بررسی و مقایسه شد، بدین‌صورت که قطعه دوش به تفنگ پلاسما الحاق گردید تا با خروج گاز خنثی نیتروژن از دوش، جت پلاسما را در برابر ورود اکسیژن اتمسفر حفاظت نماید. مشخصه‌یابی ریزساختاری پوشش‌ه چکیده کامل
        در این پژوهش خواص پوشش اعمال‌شده توسط فرایند پاشش پلاسمایی معمولی و با دوش گاز خنثی بررسی و مقایسه شد، بدین‌صورت که قطعه دوش به تفنگ پلاسما الحاق گردید تا با خروج گاز خنثی نیتروژن از دوش، جت پلاسما را در برابر ورود اکسیژن اتمسفر حفاظت نماید. مشخصه‌یابی ریزساختاری پوشش‌ها با استفاده از میکروسکوپ نوری و میکروسکوپ الکترونی روبشی مجهز به طیف‌سنج پراش انرژی انجام شد. سختی پوشش‌ها نیز به روش ویکرز و تحت نیروی 30 گرم اندازه‌گیری شد. آزمون‌های اکسیداسیون هم‌دما و شوک حرارتی به ترتیب در دماهای 1000 و &ordm;C 950 انجام گرفتند. نتایج حاصل بعد از پاشش نشان می دهند که استفاده از گاز محافظ نیتروژن مفید بوده و پوشش حاصل با استفاده از دوش نیتروژن دارای اکسید و تخلخل کمتر (میزان 5 درصد) و ساختار همگن‌تری است. نتایج مربوط به اکسیداسیون هم دما نشان داد سرعت رشد لایه TGO در نمونه پاشش شده با دوش نیتروژن کمتر است. آزمون شوک حرارتی نشان داد که نمونه پاشش شده با دوش نیتروژن به‌واسطه رشد لایه لایه و منظم TGO و همچنین میزان اکسید و تخلخل کمتر نسبت به نمونه پاشش شده بدون دوش نیتروژن، از مقاومت بیشتری برخوردار است. همچنین ریزسختی پوشش پاشش شده بدون دوش نیتروژن میزان 35 ویکرز بیشتر از پوشش ایجادشده با دوش نیتروژن است. پرونده مقاله
      • دسترسی آزاد مقاله

        165 - A new method for determination of natural frequency in bending vibration mode of single-walled carbon nanotubes
        علیرضا فتاحی واجاری
        This paper investigates the bending vibration of single-walled carbon nanotubes based on a new theory called doublet mechanics with a scale parameter. A sixth order partial differential equation that governs the bending vibration for such nanotubes is derived. Euler-Ber چکیده کامل
        This paper investigates the bending vibration of single-walled carbon nanotubes based on a new theory called doublet mechanics with a scale parameter. A sixth order partial differential equation that governs the bending vibration for such nanotubes is derived. Euler-Bernoulli beam model is used in this paper. Using doublet mechanics, the relation between natural frequency and scale parameter is derived in the bending vibration mode. It is proven that scale parameter plays significant role in the vibration behavior of such nanotubes in lateral direction. Such effect decreases the natural frequency compared to the predictions of the classical continuum mechanics models. However, with increasing the tube length, the scale effect on the natural frequency decreases. To validate this method, the results obtained herein are compared with the existing nonlocal and molecular dynamics results and good agreement is observed. It is the first time that DM is used to model the bending vibration of carbon nanotube. پرونده مقاله
      • دسترسی آزاد مقاله

        166 - Analysis and Simulation of the Effect of Turbine Inlet Temperature on Thermodynamic Performance of the Water – Ammonia Combined Cycle
        سهیل محترم علی آقا میرجلیلی احمدرضا فقیه خراسانی
        Due to the importance of power generation cycles including combined cycle, many studies have been done in recent years and many researchers have been tried to optimize these cycles by using of existing methods. In this study, the Water-Ammonia cycle is investigated in t چکیده کامل
        Due to the importance of power generation cycles including combined cycle, many studies have been done in recent years and many researchers have been tried to optimize these cycles by using of existing methods. In this study, the Water-Ammonia cycle is investigated in the combined-cycle of the Water-Ammonia, working dual Water-Ammonia mixture is used as the works fluid. This cycle can be used from different sources such as typical power dissipation of energy cycles or independent heat source that used from solar energy or geothermal. The aim of this paper is the investigation of the inlet temperature on thermodynamic performance of the Water-Ammonia combined cycle. In this research, at first, the Ammonia-Water cycle can be modeled with by using of EES software and then the Rankine-thermodynamic gas combined cycle is simulated. Also, the results are studied from the perspective of the first and second law of thermodynamics. Finally, the effect of turbine inlet temperature into the thermodynamic performance is discussed. پرونده مقاله
      • دسترسی آزاد مقاله

        167 - Robust Control of Power System Stabilizer Using World Cup Optimization Algorithm
        Ali Madadi Navid Razmjooy Mehdi Ramezani
        In this paper, we propose a new optimized PID controller to stabilize the synchronous machine connected to an infinite bus. The model for the synchronous machine is 4-ordered linear Philips-Heffron synchronous machine. In this research, the parameters of the PID control چکیده کامل
        In this paper, we propose a new optimized PID controller to stabilize the synchronous machine connected to an infinite bus. The model for the synchronous machine is 4-ordered linear Philips-Heffron synchronous machine. In this research, the parameters of the PID controller are optimally achieved by minimizing a definite fitness function to removes the unstable Eigen-value to the left side of imaginary axis. The considered parameters for the controller are achieved by employing a new defined, World Cup Optimization algorithm. After applying the proposed controller, it is compared by the particle swarm optimization as a popular and high performance algorithm. Here, controller is obtained for all operating points. Final results show that the using World Cup Optimization algorithm has a better performance toward the compared particle swarm optimization. پرونده مقاله
      • دسترسی آزاد مقاله

        168 - بررسی جوانه زنی و بنیه بذرهای با شکل/اندازه متفاوت ذرت دورگ سینگل کراس 704با آزمون پیری تسریع شده
        عاطفه جمال زاده اهوازی آیدین حمیدی محمد نصری
        به منظور بررسی برخی ویژگی های مرتبط با جوانه زنی و بنیه بذر ذرت دورگ سینگلکراس 704با شکل ها/اندازهمختلف و دارای قابلیت جوانه زنی اولیه متفاوت ، آزمایشی با انجام آزمون پیری تسریع شده به صورت فاکتوریل بر پایهطرح کاملاً تصادفی با 4تکرار در سال 1399در آزمایشگاه تجزیه کیفی ب چکیده کامل
        به منظور بررسی برخی ویژگی های مرتبط با جوانه زنی و بنیه بذر ذرت دورگ سینگلکراس 704با شکل ها/اندازهمختلف و دارای قابلیت جوانه زنی اولیه متفاوت ، آزمایشی با انجام آزمون پیری تسریع شده به صورت فاکتوریل بر پایهطرح کاملاً تصادفی با 4تکرار در سال 1399در آزمایشگاه تجزیه کیفی بذر مؤسسه تحقیقات ثبت و گواهی بذر ونهال کرج اجرا شد. تیمارهای آزمایش شامل بذرهای با شکل های پهن و گرد و اندازه متوسط ، دارای 3قابلیت جوانه-زنی اولیه 92درصد (بالای استاندارد) ، 88درصد (استاندارد) و 85درصد (زیراستاندارد) بودند . پس از آزمون پیریتسریع شده، با انجام آزمون جوانه زنی استاندارد و تجزیه و تحلیل رشد گیاهچه، درصد جوانه زنی نهایی، درصدگیاهچه های عادی، متوسط زمان جوانه زنی، ضریب سرعت جوانه زنی، طول و وزن خشک گیاهچه، شاخص های طولیو وزنی بنیه گیاهچه تعیین شدند. نتایج نشان داد که بذرهای پهن دارای بیشترین درصد گیاهچه های عادی (91درصد) بود و متوسط زمان جوانه زنی بذرها با شکل/اندازه مورد بررسی با قابلیت جوانه زنی 92درصد کمترین مقدار( 1/1-16/18روز) و ضریب سرعت جوانه زنی بذرهای پهن با قابلیت جوانه زنی اولیه 92درصد ( 865/0 ) بیشترینمقدار بود . همچنین بیشترین طول گیاهچه ( 24/30سانتی متر) به ذره ای دارای قابلیت جوانه زنی اولیه 92و اندازهمتوسط ( 27/29 سانتیمتر) تعلق داشت. بذرهای متوسط با قابلیت جوانه زنی اولیه 92درصد از بیشترین وزن خشکگیاهچه ( 873/0گرم) برخوردار بودند و شاخص طولی و وزنی بنیه گیاهچه بذرهای با قابلیت جوانه زنی اولیه 88و92درصد بهترتیب بیشترین مقدار ( 2618و 70) بودند. بنابراین براساس نتایج این تحقیق مشخص گردید، بذرهایذرت هیبرید سینگلکراس 704با اندازه متوسط، شکل پهن و قابلیت جوانه زنی اولیه 88و 92درصد از نظرخصوصیات قابلیت جوانه زنی بذر و بنیه گیاهچه از کیفیت بالاتری برخوردار بودند . پرونده مقاله
      • دسترسی آزاد مقاله

        169 - بررسی اثر تراکم کشت و رقم در تولید خیار گلخانه ای (.Cucumis sativus L )
        بردیا بیات محمدحسین انصاری مرجان دیانت علی محمدی ترکاشوند
        نوسانات زیاد عملکرد نهایی خیار گلخانه ای با توجه به سطح زیر کشت بسیار زیاد آن در ایران از اهمیت بالایی برخوردار است به طوری که 76/47% کل گلخانه های کشور زیر کشت خیار هستند. به منظور بررسی اثر تراکم کشت و رقم در تولید خیار گلخانه ای (Cucumis sativus) آزمایشی به صورت فا چکیده کامل
        نوسانات زیاد عملکرد نهایی خیار گلخانه ای با توجه به سطح زیر کشت بسیار زیاد آن در ایران از اهمیت بالایی برخوردار است به طوری که 76/47% کل گلخانه های کشور زیر کشت خیار هستند. به منظور بررسی اثر تراکم کشت و رقم در تولید خیار گلخانه ای (Cucumis sativus) آزمایشی به صورت فاکتوریل در قالب طرح پایه بلوک های کامل تصادفی در 3 تکرار طی دو سال 1396 و 1397 انجام پذیرفت. بر این اساس ارقام خیار تک گل، دو گل، میان گل و پر گل در تراکم کشت های مختلف 37، 42 و 47 سانتی متری کشت شدند. نتایج تحقیق نشان داد که بالاترین بهره وری تولید در تراکم کشت 42 سانتی متری بوته ها از هم و انتخاب ارقام پر گل با حداکثر عملکردی معادل 270 تن در هکتار به دست آمد و کمترین میزان عملکرد در ارقام تک گل با تراکم کشت 37 سانتی متری و مقدار عددی 197 تن در هکتار حاصل گردید. بنابراین اصلی ترین دلیل کاهش عملکرد خیار در استان تهران، انتخاب ارقام کم گل با تراکم کشت نامناسب ارزیابی شد. پرونده مقاله
      • دسترسی آزاد مقاله

        170 - واکاوی شیوه های مدیریت بحران فدراسیون روسیه در مساله اوکراین
        محسن حبیبی احمد بخشایشی اردستانی سید علی طباطبایی پناه
        روابط با اوکراین در سیاست خارجی روسیه بعد از فروپاشی شوروی از اهمیت خاصی برخوردار شد که این اهمیت تنها ژئوپلیتیکی و ژئوراهبردی نیست. برقراری روابط روسیه با اوکراین بعنوان کشوری که روسیه آن را بعنوان حوزه خارج نزدیک خود قلمداد می کند با جدایی دردناکی توام بوده و روند پیچ چکیده کامل
        روابط با اوکراین در سیاست خارجی روسیه بعد از فروپاشی شوروی از اهمیت خاصی برخوردار شد که این اهمیت تنها ژئوپلیتیکی و ژئوراهبردی نیست. برقراری روابط روسیه با اوکراین بعنوان کشوری که روسیه آن را بعنوان حوزه خارج نزدیک خود قلمداد می کند با جدایی دردناکی توام بوده و روند پیچیده تشخیص هویت متقابل دو کشور را منعکس می کند. از این رو بحران فرسایشی اوکراین همواره با قدرت سخت افزاری روسیه پاسخ داده شده است، که آخرین مورد آن بحران تنگه کرچ و دریای آزوف بوده است که با پاسخ سخت روسیه در قبال کارشکنی های پروشنکو مواجه شده است. نوشتار پیش رو در پی پاسخ به این پرسش است که روسیه چگونه و با استفاده از چه فنون و ابزارهایی به مدیریت بحران اوکراین اقدام کرده است؟ پاسخ این پرسش این است که منطق رهیافت روسی در مدیریت بحران های بین المللی حکایت از آن دارد که بعلت اهمیت اوکراین برای این کشور، روسیه در قالب الگوهای مدیریت بحران مبتنی بر الگوهای توازن قوای نامتقارن، تک خطی و تک &ndash; چند قطبی، با استفاده از اهرم های سخت افزاری و اهرم های تکمیلی نرم افزاری به مدیریت بحران اوکراین پرداخته است. روش پژوهش این نوشتار مبتنی بر راهبرد پژوهشی توصیفی تحلیلی است. پرونده مقاله
      • دسترسی آزاد مقاله

        171 - بررسی عملکرد سازمان فضایی خانه¬های یک¬طرف¬ساخت پهلوی اول شیراز (مطالعه¬موردی: خانه ذاکری)
        فاطمه  کاکایی طاهره نصر هادی کشمیری حامد مضطرزاده
        بیان مساله: این پژوهش درصدد آن است تا با استفاده از شیوه زندگی به عنوان وجه عینی مفهوم فرهنگ و پیکره¬بندی فضایی به تحلیل سازمان فضایی خانه انتخابی از منظر نظام¬های حرکتی، عرصه¬بندی و کارکردی بپردازد. اهمیت و ضرورت پژوهش: از آنجایی که تاکنون پژوهش اندکی در خانه¬های شیرا چکیده کامل
        بیان مساله: این پژوهش درصدد آن است تا با استفاده از شیوه زندگی به عنوان وجه عینی مفهوم فرهنگ و پیکره¬بندی فضایی به تحلیل سازمان فضایی خانه انتخابی از منظر نظام¬های حرکتی، عرصه¬بندی و کارکردی بپردازد. اهمیت و ضرورت پژوهش: از آنجایی که تاکنون پژوهش اندکی در خانه¬های شیراز که واجد شرایط و معیارهای ارزشمند جهت حفاظت و الگوبرداری از معماری آنها هستند، انجام شده است تا با شناخت نسبتا جامعی از عملکرد سازمان فضایی خانه¬ها بتوان به نظام¬های فعالیتی و الگوهای رفتاری کاربران مختلف در آنها دست یافت؛ از این رو در نگرش موردی پژوهش، خانه ذاکری به عنوان نمونه موجود، جامع و حاوی اطلاعات درخوری از گونه یک¬طرف¬ساخت پهلوی اول شیراز انتخاب گردیده است. هدف و یا سوال اصلی تحقیق: هدف اصلی از انجام پژوهش، بررسی عملکرد سازمان فضایی خانه ذاکری شیراز است؛ بر این اساس این سؤال مطرح می¬شود که چگونه می¬توان به تحلیل سازمان فضایی خانه ذاکری شیراز از منظر نظام¬های حرکتی، عرصه¬بندی و کارکردی پرداخت؟ روش تحقیق: لذا پژوهش حاضر از بعد هدف، پژوهشی کاربردی و از بعد روش جمع¬آوری اطلاعات، پژوهشی توصیفی غیرآزمایشی از نوع پیمایشی و موردی است. مهم¬ترین یافته¬ها و نتیجه¬گیری تحقیق: در گونه یک¬طرف¬ساخت پهلوی اول شیراز با حذف عملکردی حیاط و تبدیل آن به یک فضای صرفا عبوری و نیز با حذف فضاهای رابط و راهروها موجب کاهش میزان عملکرد سازمان فضایی در معماری می¬گردد. بدین ترتیب در بررسی عملکرد سازمان فضایی خانه¬های یک¬طرف¬ساخت پهلوی اول شیراز، مؤلفه¬¬های «قابلیت دسترسی» و «انعطاف¬پذیری» در نظام حرکتی فضا، مؤلفه «نفوذپذیری» در نظام عرصه¬بندی فضا و مؤلفه¬¬های «هم¬پیوندی» و «یکپارچگی» در نظام کارکردی فضا به عنوان شاخص¬های مثبت با تاثیر افزاینده و نیز مؤلفه «میانگین عمق نسبی» در نظام عرصه¬بندی فضا و مؤلفه¬های «مرتبه¬نسبی» و «تفکیک» در نظام کارکردی فضا به عنوان شاخص¬های منفی با تاثیر کاهنده بر میزان عملکرد فضا محسوب می¬شوند. پرونده مقاله
      • دسترسی آزاد مقاله

        172 - تحلیل تنش اتصال چسبی تک لبه بر اساس مدل فوندانسیون سه پارامتری ویسکوالاستیک
        مهدی ویسی تبار آرش رضا یونس شکاری
        در این مطالعه، به بررسی توزیع تنش اتصال چسبی تک لبه با چسب شونده های ایزوتروپ و با استفاده از مدل فوندانسیون سه پارامتری ویسکوالاستیک پرداخته شده است. در این مدل تنش برشی در راستای ضخامت چسب ثابت و تنش قائم در این راستا متغیر فرض شده است. همچنین برای مدل سازی رفتار ویسک چکیده کامل
        در این مطالعه، به بررسی توزیع تنش اتصال چسبی تک لبه با چسب شونده های ایزوتروپ و با استفاده از مدل فوندانسیون سه پارامتری ویسکوالاستیک پرداخته شده است. در این مدل تنش برشی در راستای ضخامت چسب ثابت و تنش قائم در این راستا متغیر فرض شده است. همچنین برای مدل سازی رفتار ویسکوالاستیک چسب از مدل زنر استفاده گردیده و معادلات دیفرانسیلی حاکم به کمک معادلات تعادل و ساختاری در فضای لاپلاس استخراج شده است. سپس به طور هم زمان معادلات مذکور حل و به کمک روش عددی لاپلاس معکوس گیور- استفست نتایج از فضای لاپلاس به فضای زمان تبدیل شده است. در انتها نتایج حاصل از تحلیل مذکور با نتایج المان محدود در یک اتصال نامتقارن مقایسه گردیده است که نتایج انطباق بسیار مناسبی را نشان می دهند. بیشترین کاهش تنش برشی در نیم میلیمتری انتهای ناحیه هم پوشانی در سمت چسب شونده برنجی و بیشترین کاهش تنش تورق با گذشت زمان در نیم میلیمتری انتهای ناحیه هم پوشانی در سمت چسب شونده آلومینیومی رخ می دهد. میزان کاهش تنش بعد از حدود 11 روز بسیار کاهش یافته و به حالت پایدار می رسد. پرونده مقاله
      • دسترسی آزاد مقاله

        173 - A TOPSIS-Based Improved Weighting Approach With Evolutionary Computation
        Mithat Zeydan Murat  Güngör Burak Urazel
        Although optimization of weighted objectives is ubiquitous in production scheduling, the literature concerning the determination of weights used in these objectives is scarce. Authors usually suppose that weights are given in advance, and focus on the solution methods f چکیده کامل
        Although optimization of weighted objectives is ubiquitous in production scheduling, the literature concerning the determination of weights used in these objectives is scarce. Authors usually suppose that weights are given in advance, and focus on the solution methods for the specific problem at hand. However, weights directly settle the class of optimal solutions, and are of utmost importance in any practical scheduling problem. In this study, we propose a new weighting approach for single machine scheduling problems. First, factor weights to be used in customer evaluation are found by solving a nonlinear optimization problem using the covariance matrix adaptation evolutionary strategy (CMAES) under fuzzy environment that takes a pairwise comparison matrix as input. Next, customers are sorted using the technique for order of preference by similarity to ideal solution (TOPSIS) by means of which job weights are obtained. Finally, taking these weights as an input, a total weighted tardiness minimization problem is solved by using mixed-integer linear programming to find the best job sequence. This combined methodology may help companies make robust schedules not based purely on subjective judgment, find the best compromise between customer satisfaction and business needs, and thereby ensure profitability in the long run. پرونده مقاله
      • دسترسی آزاد مقاله

        174 - مطالعه نظری پایداری داروی دارای عامل آلکیله‌کننده کلرامبوسیل با نانولوله‌های کربنی و نانولوله‌های بور نیتریدی : روش‌های مکانیک کوانتومی/مکانیک مولکولی (QM/MM)
        محمد حسن جمشیدی ندا حسن زاده حوریه یحیایی امیر بهرامی
        نانولوله‌ها به‌عنوان وسیله‌ای برای کاهش عوارض جانبی داروهای شیمی‌درمانی و تسهیل رساندن کارآمدتر دارو به بافت‌های هدف عمل می‌کنند. این مطالعه بر دو نوع نانوحامل تمرکز دارد: نانولوله‌های کربنی تک جداره و نانولوله‌های نیترید بور، که هر کدام داروی دارای عامل آلکیله‌کننده را چکیده کامل
        نانولوله‌ها به‌عنوان وسیله‌ای برای کاهش عوارض جانبی داروهای شیمی‌درمانی و تسهیل رساندن کارآمدتر دارو به بافت‌های هدف عمل می‌کنند. این مطالعه بر دو نوع نانوحامل تمرکز دارد: نانولوله‌های کربنی تک جداره و نانولوله‌های نیترید بور، که هر کدام داروی دارای عامل آلکیله‌کننده را حمل می‌کنند: کلرامبوسیل) این تحقیق به بررسی پایداری این حامل¬ها در دماها و شرایط حلال مختلف می¬پردازد. با استفاده از روش‌های محاسبه مکانیک کوانتومی، تعامل بین ترکیبات دارویی ضد سرطان کلرامبوسیل با دو نانو حامل در طیفی از دماها و محیط‌های حلالی متفاوت مورد بررسی قرار گرفت. با بررسی پارامترهای ترمودینامیکی از طریق محاسبات مکانیک مولکولی مقادیر مربوط به پارامترهای سختی، قطبیت، انرژی آزاد گیبس و همچنین گپ هومو و لوموی ترکیبات محاسبه شد. همچنین با استفاده از محاسبات مکانیک مولکولی، میدان های نیروی بهینه و کمترین حالت انرژی در هر حلال تعیین شد. یافته¬های این تحقیق نویدبخش توسعه سیستم¬های دارورسانی هدفمند و حفظ این ترکیبات دارویی حیاتی است. پرونده مقاله
      • دسترسی آزاد مقاله

        175 - تأملی بر روایت‌های متفرد محمد بن سنان در کتب اربعه حدیثی شیعه
        سجاد   سلامی مژگان سرشار محمد شریفانی
        یکی از راویان پر حدیث در کتب اربعه حدیثی شیعه، محمد ‌‌بن‌‌ سنان‌ زاهری (م.220ق) است. تعداد زیادی از بزرگان رجالی همچون ابن‌الغضائری در الضعفاء، ابن‌نجاشی در الرجال، شیخ طوسی در الفهرست و التهذیبین، شهیدثانی در الروضه البهیه و خوئی در معجم رجال‌الحدیث وی را تضعیف کرده‌ان چکیده کامل
        یکی از راویان پر حدیث در کتب اربعه حدیثی شیعه، محمد ‌‌بن‌‌ سنان‌ زاهری (م.220ق) است. تعداد زیادی از بزرگان رجالی همچون ابن‌الغضائری در الضعفاء، ابن‌نجاشی در الرجال، شیخ طوسی در الفهرست و التهذیبین، شهیدثانی در الروضه البهیه و خوئی در معجم رجال‌الحدیث وی را تضعیف کرده‌اند و بعضاً معتقدند که وی متهم به غلو، ارتفاع و ضعف است، لذا به ویژه روایت‌های مفرد او را از حیز اعتبار ساقط کرده‌اند و در مقابل گروهی دیگر همانند سید‌بن‌طاووس در فلاح‌السائل، شیخ‌ حر عاملی در وسائل‌الشیعۀ، مجلسی اول در روضۀ‌المتقین، مجلسی دوم در المرآۀالعقول و الوجیزه، سید بحرا‌لعلوم در الفوائد‌الرجالیۀ او را توثیق کرده‌اند. در این نوشتار کوشش شده است تا با بررسی 8 روایت مفرد محمد‌بن‌سنان در الکافی، الفقیه و التهذیب و استناد به قرائن مختلف به بررسی ویژگی‌های تضعیفی نامبرده بپردازیم تا به اطلاعات جامعی از احوال او دست یابیم. متن این روایت‌ها را با توجه به مخالفت آن‌ها با قرآن، مقایسه با سایر احادیث صحیح متشابه یا مخالف، میزان سازش آن‌ها با عقل، نظرات مفسران و مانند این معیارها ارزیابی کرده‌ایم. مهم‌ترین نتیجه پژوهش این است که با توجه به بررسی و تحلیل متن روایت‌های متفرد ابن‌‌‌سنان، روایت‌های وی به دلیل برخورداری از ویژگی‌های تضعیفی متعددی همچون اختلال، اضطراب غلو، ارتفاع و افراط دارای ضعف هستند و در نتیجه آرای بزرگان رجالی در باب ضعیف بودن شخصیت محمد‌بن‌‌سنان و روایت‌های مفرد وی صحیح است. پرونده مقاله
      • دسترسی آزاد مقاله

        176 - اثر کاربرد میکوریزا بر تحمل هیبریدهای ذرت به تنش خشکی
        خاطره توکلی اوجانی ورهرام رشیدی مهرداد یارنیا علیرضا تاری نژاد بهرام میرشکاری
        این پژوهش با هدف بررسی واکنش هیبریدهای مختلف ذرت مواجه با کم آبی به کاربرد قارچ مایکوریزا به صورت آزمایش اسپلیت فاکتوریل بر پایه طرح بلوک های کامل تصادفی طی دو سال 1394 و 1395 در ایستگاه تحقیقاتی دانشکده کشاورزی دانشگاه آزاد اسلامی واحد تبریز انجام شد. عامل اصلی چکیده کامل
        این پژوهش با هدف بررسی واکنش هیبریدهای مختلف ذرت مواجه با کم آبی به کاربرد قارچ مایکوریزا به صورت آزمایش اسپلیت فاکتوریل بر پایه طرح بلوک های کامل تصادفی طی دو سال 1394 و 1395 در ایستگاه تحقیقاتی دانشکده کشاورزی دانشگاه آزاد اسلامی واحد تبریز انجام شد. عامل اصلی شامل کم آبی بر اساس تبخیر از تشتک کلاس A در دو سطح 70 میلی متر به عنوان شاهد و 140 میلی متر به عنوان تنش خشکی و عامل فرعی شامل 14 ترکیب فاکتوریل کاربرد و عدم کاربرد قارچ مایکوریزا با هفت هیبرید ذرت شامل SC260، SC400، SC301، SC4015، SC703، SC704 و SC705 بودند. برای ارزیابی میزان تحمل و حساسیت هیبرید های ذرت به تنش خشکی از شاخص تحمل به تنش، شاخص حساسیت به تنش، شاخص تحمل، میانگین حسابی محصول دهی و میانگین هندسی محصول دهی استفاده شد. تجزیه مرکب دو ساله نشان داد که برای اکثر صفات مورد مطالعه اثر متقابل سال در تنش در هیبرید ذرت معنی دار بود. عمکرد دانه در هر دو سال متوالی در شرایط کاربرد قارچ میکوریزا در هیبرید SC301 عملکرد بهتری از سایرین داشت و نیز به عنوان متحمل ترین هیبرید ذرت به تنش خشکی شناخته شد. شاخص های شاخص تحمل به تنش و میانگین هندسی محصول دهی همبستگی مثبت و معنی داری با عملکرد دانه در هر دو سال داشتند. همچنین، کاربرد میکوریزا بر تخفیف اثرات تنش خشکی اثر متفاوتی داشت ولی در کل باعث افزایش عملکرد ذرت در شرایط تنش خشکی شد. پرونده مقاله
      • دسترسی آزاد مقاله

        177 - تأثیر منابع و مقادیر کود نیتروژنه بر عملکرد و اجزای عملکرد دانه ذرت رقم سینگل کراس 704
        علی فرامرزی سلیمان جمشیدی کوروش صیامی
        به منظور بررسی اثر منابع و مقادیر کودهای نیتروژنه بر عملکرد دانه و اجزای آن در ذرت رقم سینگل کراس 704، آزمایشی در سال زراعی 1382 در اراضی مزرعه تحقیقاتی دانشگاه آزاد اسلامی واحد میانه انجام شد. در این مطالعه دو سطح کود نیتروژنه شامل نیترات آمونیوم و اوره با سه سطح میزان چکیده کامل
        به منظور بررسی اثر منابع و مقادیر کودهای نیتروژنه بر عملکرد دانه و اجزای آن در ذرت رقم سینگل کراس 704، آزمایشی در سال زراعی 1382 در اراضی مزرعه تحقیقاتی دانشگاه آزاد اسلامی واحد میانه انجام شد. در این مطالعه دو سطح کود نیتروژنه شامل نیترات آمونیوم و اوره با سه سطح میزان کود شامل 100،160 و 220 کیلوگرم نیتروژن خالص در هکتار بصورت یک طرح فاکتوریل و در قالب آزمایش بلوک‌های کاملاً تصادفی با 4 تکرار انجام گردید و در هر تکرار یک کرت نیز به عنوان شاهد بدون دریافت کود نیتروژنه در نظر گرفته شد. کاشت در تاریخ 23 اردیبهشت ماه و به صورت جوی و پشته‌ با دست و بر روی ردیف‌هایی به فواصل 75 سانتی متر و تراکم 67 هزار بوته در هکتار انجام شد. کودهای نیتروژنه در سه زمان شامل کاربرد همزمان با کاشت، مرحله چهار برگی و مرحله 8 برگی به صورت سرک در اختیار گیاه قرار گرفت. برای تعیین عملکرد دانه و عملکرد بیولوژیک در زمان رسیدگی فیزیولوژیکی، بوته‌ها از 5 متر مربع سه ردیف میانی و برای اندازه‌گیری اجزای عملکرد، 15 بوته به طور تصادفی از هر کرت انتخاب و تعداد بلال در بوته، تعداد بلال در ردیف و تعداد دانه در ردیف شمارش و وزن هزار دانه مشخص گردید. نتایج حاصل از آزمایش نشان داد که کود نیترات آمونیوم عملکردی بالاتر از کود اوره دارد و میزان 160 و 220 کیلوگرم در هکتار نیتروژن خالص، عملکرد مساوی و بیشتر از تیمار شاهد و 100 کیلوگرم در هکتار تولید می‌کند. عملکرد بالای تیمار نیترات آمونیوم به کارایی ذرت در جذب بالای آن و عملکرد پایین‌تر کود اوره به اتلاف نیتروژن در اثر تصعید و شستشو نسبت داده ‌شد. پرونده مقاله
      • دسترسی آزاد مقاله

        178 - بررسی تأثیر مقدار و تقسیط ازت و کود کامل میکرو (ریز مغذی) بر عملکرد کمی ذرت سینگل کراس 704 در شرایط آب و هوایی کرمان
        فرهاد همایون&rlm; فر علیرضا بهرامی&rlm; نژاد
        به منظور بررسی تأثیر مقدار و تقسیط ازت و کود کامل میکرو بر عملکرد کمی ذرت سینگل کراس 704 در شرایط آب و هوایی کرمان، آزمایشی در سال 1384 در مزرعه کشاورزی دانشگاه آزاد اسلامی واحد کرمان صورت گرفت. این مطالعه به صورت طرح کرت های دو بار خرد شده بر پایه طرح بلوک های کامل تصا چکیده کامل
        به منظور بررسی تأثیر مقدار و تقسیط ازت و کود کامل میکرو بر عملکرد کمی ذرت سینگل کراس 704 در شرایط آب و هوایی کرمان، آزمایشی در سال 1384 در مزرعه کشاورزی دانشگاه آزاد اسلامی واحد کرمان صورت گرفت. این مطالعه به صورت طرح کرت های دو بار خرد شده بر پایه طرح بلوک های کامل تصادفی در سه تکرار انجام شد و در آن منبع کود ازت ( اوره) در سه سطح (300 ،450 و 600 کیلوگرم در هکتار) به عنوان کرت اصلی، تقسیط هر کدام از این سطوح به دو صورت و به عنوان کرت فرعی و کود کامل میکرو در دو سطح (صفر و 3 در هزار) به عنوان کرت فرعی- فرعی در نظر گرفته شد.کاشت در تاریخ 10 اردیبهشت ماه به صورت جوی پشته با دستگاه و بر روی ردیف هایی به فواصل 75 سانتی متر و فاصله بوته ها 15 سانتی متر انجام شد.کود اوره در سه مرحله یکی هم زمان با کاشت، مرحله 4 برگی و 8 برگی به صورت سرک و کود کامل میکرو در زمان 4 برگی در دو هفته متوالی محلول پاشی شد. برای تعیین عملکرد دانه و عملکرد بیولوژیکی در زمان رسیدگی فیزیولوژیکی بوته ها از 5 متر مربع سه ردیف میانی و برای اندازه گیری اجزای عملکرد، 15 بوته به طور تصادفی از هر کرت انتخاب و صفات کمی طول بلال، تعداد ردیف در هربلال، تعداد دانه در ردیف، وزن کل بوته و وزن هزار دانه مشخص گردید. نتایج حاصل از آزمایش نشان داد که کود اوره به میزان 600 کیلوگرم در هکتار با تقسیط به صورت ، عملکرد بالاتری نسبت به سایر تیمارها به همراه دارد. هم چنین کاربرد کود کامل میکرو به صورت 3 در هزار فقط در دو صفت وزن بوته و وزن هزار دانه دارای اثر افزایشی بوده و با شاهد اختلاف معنی دار نشان داد، در صورتی که از نظرسایر صفات مورد بررسی تفاوت معنی داری مشاهده نشد. پرونده مقاله