Lateral Vibrations of Single-Layered Graphene Sheets Using Doublet Mechanics
محورهای موضوعی : Engineering
1 - Department of Mechanical and Aerospace Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
2 - Department of Mechanical and Aerospace Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
کلید واژه: Natural frequency, Doublet mechanics, Length scale parameter, Lateral vibration, Single-layered graphene sheets,
چکیده مقاله :
This paper investigates the lateral vibration of single-layered graphene sheets based on a new theory called doublet mechanics with a length scale parameter. After a brief reviewing of doublet mechanics fundamentals, a sixth order partial differential equation that governs the lateral vibration of single-layered graphene sheets is derived. Using doublet mechanics, the relation between natural frequency and length scale parameter is obtained in the lateral mode of vibration for single-layered graphene. It is shown that length scale parameter plays a significant role in the lateral vibration behavior of single-layered graphene sheets. Such effect decreases the natural frequency compared to the predictions of the classical continuum mechanics models. However with increasing the length of the plate, the effect of scale parameter on the natural frequency decreases. For validating the results of this method, the results obtained herein are compared with the existing nonlocal and molecular dynamics results and good agreement with the latter is observed.
[1] Granik V.T., 1997, Microstructural mechanics of granular media, Technique Report IM/MGU 78-241, Institute of Mechanics of Moscow State University, in Russian.
[2] Granik V.T., Ferrari M., 1993, Microstructural mechanics of granular media, Mechanics of Materials 15: 301-322.
[3] Ferrari M., Granik V.T., Imam A., Nadeau J., 1997, Advances in Doublet Mechanics, Springer, Berlin.
[4] Kojic M., Vlastelica I., Decuzzi P., Granik V.T., Ferrari M., 2011, A finite element formulation for the doublet mechanics modeling of microstructural materials, Computer Methods in Applied Mechanics and Engineering 200: 1446-1454.
[5] Xin J., Zhou L.X., Ru W.J., 2009, Ultrasound attenuation in biological tissue predicted by the modified doublet mechanics model, Chinese Physics Letters 26(7): 074301.1-074301.4.
[6] Ferrari M., 2000, Nanomechanics, and biomedical nanomechanics: Eshelby's inclusion and inhomogeneity problems at the discrete continuum interface, Biomedical Microdevices 2(4): 273-281.
[7] Gentile F., Sakamoto J., Righetti R., Decuzzi P., Ferrari M., 2011, A doublet mechanics model for the ultrasound characterization of malignant tissues, Journal of Biomedical Science and Engineering 4: 362-374.
[8] Lin S.S., Shen Y.C., 2005, Stress fields of a half-plane caused by moving loads-resolved using doublet mechanics, Soil Dynamics and Earthquake Engineering 25: 893-904.
[9] Sadd M.H., Dai Q., 2005, A comparison of micro-mechanical modeling of asphalt materials using finite elements and doublet mechanics, Mechanics of Materials 37: 641-662.
[10] Fang J.Y., Jue Z., Jing F., Ferrari M., 2004, Dispersion analysis of wave propagation in cubic-Tetrahedral assembly by doublet mechanics, Chinese Physics Letters 21(8): 1562-1565.
[11] Sadd M. H., 2005, Elasticity Theory Applications, and Numeric, Elsevier Butterworth-Heinemann, Burlington.
[12] Eringen A.C., 1972, Nonlocal Polar Elastic Continua, International Journal of Engineering Science 10: l-16.
[13] Iijima S., 1991, Helical microtubes of graphitic carbon, Nature 354: 56-58.
[14] Katsnelsona M.I., Novoselov K.S., 2007, Graphene: New bridge between condensed matter physics and quantum electrodynamics, Solid State Communications 143: 3-13.
[15] Heersche H.B., Herrero P.J., Oostinga J.B., Vandersypen L.M.K., Morpurgo A.F., 2007, Induced superconductivity in graphene, Solid State Communications 143: 72-76.
[16] Stankovich S., Dikin D.A., Piner R.D., Kohlhaas K.A., Kleinhammes A., Jia Y., Wu Y., Nguyen S.T., Ruoff R.S., 2007, Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide, Carbon 45: 1558-1565.
[17] Danesh M., Farajpour A., Mohammadi M., 2012, Axial vibration analysis of a tapered nanorod based on nonlocal elasticity theory and differential quadrature method, Mechanics Research Communications 39: 23-27.
[18] Wang Q, C Wang M., 2007, The constitutive relation and small scale parameter of nonlocal continuum mechanics for modelling carbon nanotubes, Nanotechnology 18: 075702.1-075702.4.
[19] Ghannadpour S.A.M., Mohammadi B., Fazilati J., 2013, Bending, buckling and vibration problems of nonlocal Euler beams using Ritz method, Composite Structures 96: 584-589.
[20] Malekzadeh P., Mohebpour S. R., Heydarpour Y., 2012, Nonlocal effect on the free vibration of short nanotubes embedded in an elastic medium, Acta Mechanica 223: 1341-1350.
[21] Stankovich S., Piner R.D, Nguyen S.T., Ruoff R.S., 2006, Synthesis and exfoliation of isocyanate-treated graphene oxide nanoplatelets, Carbon 44: 3342-3347.
[22] Wang J., Tian M., He X., Tang Z., 2014, Free vibration analysis of single-layered graphene sheets based on a continuum model, Applied Physics Frontier 2(1): 1-7.
[23] Rao S.S., 2007, Vibration of Continuous Systems, John Wiley and Sons, New Jersey.
[24] Green A.E., Zerna W., 1992, Theoretical Elasticity, Dover publications, New York.
[25] Reddy J.N., 2010, Non-local nonlinear formulations for bending of classical and shear deformation theories of beams and plates International Journal of Engineering Science 48(11): 1507-1518.
[26] Aghababaei R., Reddy J.N., 2009, Nonlocal third-order shear deformation plate theory with application to bending and vibration of plates, Journal of Sound and Vibration 326(1-2): 277-289.
[27] Farajpour A., Mohammadi M., Shahidi A.R., Mahzoon M., 2011, Axisymmetric buckling of the circular graphene sheets with the nonlocal continuum plate model, Physica E: Low-dimensional Systems and Nanostructures 43(10): 1820-1825.
[28] Pradhan S.C., Phadikar J. K., 2009, Nonlocal elasticity theory for vibration of nanoplates, Journal of Sound and Vibration 325: 206-223.
[29] Alibeigloo A., 2011, Free vibration analysis of nano-plate using three-dimensional theory of elasticity, Acta Mechanica 222: 149-159.
[30] Aksencer T., Aydogdu M., 2011, Levy type solution method for vibration and buckling of nanoplates using nonlocal elasticity theory, Physica E 43: 954-959.
[31] Ansari R., Sahmani S., Arash B., 2010, Nonlocal plate model for free vibrations of single-layered graphene sheets, Physics Letters A 375: 53-62.
[32] Jalali S.K., Rastgoo A., Eshraghi I., 2011, Large amplitude vibration of imperfect shear deformable nano-plates using non-local theory, Journal of Solid Mechanics 3(1): 64-73.
[33] Rouhi S., Ansari R., 2012, Atomistic finite element model for axial buckling and vibration analysis of single-layered graphene sheets, Physica E 44: 764-772.
[34] Aksencer T., Aydogdu M., 2012, Forced transverse vibration of nanoplates using nonlocal elasticity, Physica E 44: 1752-1759.
[35] Daneshmand F., Rafiei M., Mohebpour S.R., Heshmati M., 2013, Stress and strain-inertia gradient elasticity in free vibration analysis of single walled carbon nanotubes with first order shear deformation shell theory, Applied Mathematical Modelling 37: 7983-8003.
[36] Bouyge F., Jasiuk I., Boccara S., Ostoja-Starzewski M., 2002, A micromechanically based couple-stress model of an elastic orthotropic two-phase composite, European Journal of Mechanics A/Solids 21: 465-481.
[37] Bandow S., Asaka S., Saito Y., Rao A., Grigorian L., Richter E., Eklund P., 1998, Effect of the growth temperature on the diameter distribution and chirality of single-wall carbon nanotubes, Physical Review Letters 80(17): 3779-3782.
