List of Articles Weld

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Calculation of energy lost by radiation and convection during laser welding of TA6V titanium alloy
  Soumaya Lemkeddem Fethi Khelfaoui Oumelkheir Babahani
  10.1007/s40094-018-0288-x
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Advanced Manufacturing Technology by Under Water Friction Stir Welding Technique
  M Sadeghi M Farahani H Sabet
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Effects of Welding Cycles on Microstructural Characteristics and Mechanical Properties of SAF 2507 Super Duplex Stainless Steel
  M. A. Beheshty E. H. Dehkordi K. Zarrin Naghsh M. R. B. Marnany
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Effect of the FSW Tool Pin Profile on Mechanical Properties of the Al6061-Cu Plates Joint
  F. khalili K. Amini M. Golzar Shahri F. Gharavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Effects of HFRW Variables on Weldded Joint Quality of the Ferritic Stainless Steel to Cr-Mo Low Alloy Steel in Heat Recovery Steam Generator
  M Sadeghi H Sabet H Razavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Effect of Heat Treatment on the Intermetallic Compounds and Mechanical Properties of Explosive Weld Interface of three Al 5083, Al 1050 and St 1515 Layers
  Bakhtiari H Mokhtariniya F Khanzadeh M. R Farvizi M
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Evaluation of Performance of Resistance Spot Welded Joints with Different Parameters in Advanced High Strength TRIP Steel
  I. Hajiannia R. Ashiri M. R. Pakmanesh M. Shamanian M. Atapour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - The Effect of Travel and Rotational Speeds on the Mechanical Properties of Al2024 in Underwater Friction Stir Welding
  R. Azarafza A. Rabieifar A. Rezaei S. Nategh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Effect of PWHT Variables on Microstructure and Mechanical Properties of the Al-Zn Weld Metal
  M. Forghani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Advanced Manufacturing and Eco-friendly Welding Between AISI 409 Finned to High Pressure T22 Boiler Tube by HFRW Clean Energy
  M Sadeghi H Sabet S. H Razavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Investigating the Effect of Explosive Welding Variables on the Corrosion Behavior of Explosive Joint of Two-Layered Inconel 718-AISI H13 Hot Work Tool Steel Plates in Salty Environment
  A. Norbakhsh M. R. Khanzadeh GharahShiran A. Saadat H. Bakhtiari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Effects of Shielding Gas on the Depth, Width and Hardness of 17-4PH Stainless Steel during TIG Welding
  S, M Hosseini Farzaneh M Belbasi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Investigation on the Effects of Explosive Welding Parameters on the Mechanical Properties and Electrical Conductivity of Al-Cu Bimetal
  H Bakhtiari H Abbasi H Sabet M. R Khanzadeh M Farvizi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Effects of Shielding Gas on the Mechanical and Microstructural Properties of 409L Ferritic Stainless Steels during Gas Metal Arc Welding
  A. Feghhi A. Emamikhah Y. Bayat Asl
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Study of Fatigue Behavior and Microstructure of 1.6582 Steel Joint by Resistance Butt Welding
  O Ashkani H .M Semnani H Sabet M .R Tavighi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Weldability of Dissimilar Joint of AISI 304 to CK45 by GTAW Method
  A. Taherkhani Y. Shajari K. Mirzavand A. Mellatkhah Z. S. Seyedraoufi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - The Influence of the Nickel Content on Microstructure and Mechanical Properties of the Al-Mg Weld Metal
  F. Sharifi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Welding and inspection Industry Measurement System Analysis
  N Adabavazeh M Nikbakht
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Joining of Ti-6AL-4V to AISI 304 Stainless Steel using Laser Spot Welding with Circular Technique
  M Rafi H Sabet V Abouei Mehrizi A Anbarzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - High Frequency Resistance Welded Finned Tubes Technologies in Heat Recovery Steam Generator Boilers
  M. Sadeghi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Metallurgical Investigation of Under Water Friction Stir Welding (UWFSW) Process
  M Sadeghi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - extraction defects of radiographic images using local information in transform domain
  zahra mousavi Ahmad Keshavarz
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - An Experimental Investigation on Comparison of the Similar and Dissimilar Resistance Spot Welding of St12 and Galvanized Steel using Design of Experiments
  Mahmoud Moradi Hadi Abdollahi Ali Khorram
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Corrosion Behavior Characterization of the Nugget Zone in Copper/Brass Metals of Dissimilar Friction Stir Welded Lap Joints
  kamran amini Farhad Gharavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Optimizing Friction Stir Welding Process for Enhancing Strength and Hardness using Taguchi Multi-Objective Function Method
  Sajjad Khaki Ali Heidari Amin Kolahdooz
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - Optimization of AZ61 Mg Alloy Resistance Spot Welding using Response Surface Method
  Afshin Lotfi Davood Afshari Zuheir Barsoum
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Simulation of Ultrasonic Welding of Al-Cu Dissimilar Metals for Battery Joining
  Reza Abdi Behnagh Peyman Esmaeilzadeh Mohsen Agha Mohammad Pour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Effect of Welding Parameters on Microstructure and Mechanical Properties of Friction Stir Spot Welded of Titanium Alloy TiAl6V4
  Saeid Nader Masoud Kasiri- Asgarani kamran amini Morteza Shamanian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Experimental Study and Finite Element Simulation of Residual Stress in Welded Sections of Steel P91 Pipes with Multi-pass Welding
  Davood Azadi Nosratollah Solhjoei SayedAli Mousavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Investigation of The Effects of Process Parameters on The Welding Line Movement in Deep Drawing of Tailor Welded Blanks
  Ali Fazli
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - Experimental Study and Modeling of Friction Stir Welding Process of Aluminum 1100 Alloys, using Artificial Neural Network with Taguchi Method
  V. Zakeri Mehrabad Ali Doniavi A. Gholipoor
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - Effect of Rotational Speed on Wear Behavior and Mechanical Properties of Friction Stir Welded AA6061+15%Al2O3p Metal-Matrix Composite
  Moslem Paidar Mojtaba Jafarian Mohsen Salehi Mohammad Saeed Khakpash
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Effect of Burr Grinding on Fatigue Strength of Steel Butt-Welded Connections
  Abbas Fadaei Annette Betkhoodu
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - Evaluation of S/N Diagram in Welded Joints Based on Different Fatigue Failure Criteria
  Saeed Jouzdani Ali Heidari
  10.30495/admt.2020.1885273.1164
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Effect of TID-dressing on Fatigue Life Stress Concentration Factor in St37-2Butt Weldments
  Abbas Fadaei Mostafa Jalalizadeh Faeze Mohammad Zaheri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Experimental Study on Manufacturing of Tailor Friction Stir Welded Aluminium Blanks
  Farhad Teimouri Hamid Montazerolghaem Mahmoud Farzin
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - A Novel Technique for Keyhole-Less Reinforced Friction Stir Spot Welding of Polyethylene Sheets
  Moosa Sajed S. M. Hossein Seyedkashi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Microstructure Investigation and Mechanical Properties of Resistance Upset Butt Welded Ti-6Al-4V Alloy
  Mahmood Sharifitabar
  10.30495/admt.2020.1891939.1170
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - Influence of Tool Offset Distance on Microstructure and Mechanical Properties of the Dissimilar AA2024–AA7075 Plates Joined by Friction Stir Welding
  Hossain Soleimany kamran amini Farhad Gharavi
  10.30495/admt.2021.1897512.1193
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Effect of MIG Welding Parameters on Mechanical Properties of Dissimilar Weld Joints of AISI 202 and AISI 316 Steels
  Venkatratnam Dirisala KESAVA RAO V.V.S
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - Investigation of Pitting Corrosion Rate on Micro Plasma Arc Welded Dissimilar Weld Joints of AISI 304 and AISI 430 Stainless Steel Sheets
  Uma Maheswara Rao G Srinivasa Rao Chalamalasetti
  10.30495/admt.2020.1898623.1195
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - Weld Distortion and Residual Stresses in Aluminum Hollow Section T-Joint
  Asghar Mahdian Arash Babamiri Behrooz Shahriari
  10.30486/admt.2022.1934601.1296
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - Experimental Correlation Between Microstructure, Residual Stresses and Mechanical Properties of Friction Stir Welded 2024-T6 Aluminum Alloys
  Majid Farhang Mohammadreza Farahani Mohammad Nazari O. Sam Daliri
  10.30486/admt.2022.1943845.1322
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - Experimental Study on the Effects of Friction Stir Spot Welding Process Parameters on AL2024T3 Joint Strength
  Majid Farhang Mohammadreza Farahani Moein Enami
  10.30495/admt.2021.1922979.1280
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - Effect of Post-Weld Heat Treatment on Microstructure and Mechanical Properties of AA7075 Welds
  Alireza Jalil Nasrollah Bani Mostafa Arab Malek Naderi Yaghoub Dadgar Asl
  10.30486/ADMT.2023.873791
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Investigating the Effect of Joint Geometry of the Gas Tungsten Arc Welding Process on the Residual Stress and Distortion using the Finite Element Method
  A Shiri A Heidari
  10.22034/jsm.2019.668764
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - Reliability-Based Robust Multi-Objective Optimization of Friction Stir Welding Lap Joint AA1100 Plates
  E Sarikhani A Khalkhali
  10.22034/jsm.2019.1877986.1493
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - A Modified Model to Determine Heat Generation in the Friction Stir Welding Process
  A Ghiasvand S Hasanifard M Zehsaz
  10.22034/jsm.2019.1867048.1429
• Open Access Article
  • Abstract Page
  • Full-Text
  
  49 - Fatigue Failure Analysis of Trailing Arm Using Numerical Methods
  Aidin  Ghaznavi S Mirzaei
  https://doi.org/10.60664/jsm.2023.1061702
• Open Access Article
  • Abstract Page
  • Full-Text
  
  50 - Deformation of Irregular Layered Half-Space Due to Long Strike Slip Fault
  M Malik Savita Dhankhar R kumar Sahrawat
  10.22034/jsm.2022.1950821.1727
• Open Access Article
  • Abstract Page
  • Full-Text
  
  51 - Simulation of Residual Stress and Distortion in Welded Carbon Steel Pipe by Considering Solid-State Phase Transformation
  M. R Jahanban Saeed  Feli
  https://doi.org/10.60664/jsm.2024.3031772
• Open Access Article
  • Abstract Page
  • Full-Text
  
  52 - Creep Life Forecasting of Weldment
  J Jelwan M Chowdhry G Pearce
• Open Access Article
  • Abstract Page
  • Full-Text
  
  53 - Engineering Critical Assessments of Marine Pipelines with 3D Surface Cracks Considering Weld Mismatch
  S.M.H Sharifi M Kaveh H Saeidi Googarchin
• Open Access Article
  • Abstract Page
  • Full-Text
  
  54 - Effect of Submerged Arc Welding Parameter on Crack Growth Energy on St37
  J.A Khodaii A Mostafapour M.R Khoshravan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  55 - Effect of alloying elements on hydrogen diffusion in austenitic stainless steel, Carbon Dissimilar Joints
  Omid Ghani Ebrahim Heshmat Kordi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  56 - Investigation and Optimization Of the Parameters Affecting the Strength Of Nd:YAG Pulsed Laser Spot Welding in Steel Sheet Using Design Of Expriment
  Abbasali Habibollahi Nasrollah Bani mostafa Arab Ali Dehghani Amir Alinaghizadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  57 - Experimental investigation on the effect of resistance projection welding parameters on weld joint torque strength of nut to sheet
  Nasrollah Bani mostafa Arab Amir Alinaghizadeh Ali Dehghani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  58 - Analysis and presenting an optimum post weld heat treatment cycle to maximum reduction of residual stresses of electron beam welding
  Hossein Rajabi Ali Heidari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  59 - The effect of rounds of the Friction Stir Welding tool (FSW) in determining of fatigue life of T6-7075 aluminum alloy
  Mohamad Jafar Ostad Ahmad Ghorabi Reza Samieifard
• Open Access Article
  • Abstract Page
  • Full-Text
  
  60 - Visual Torch Position Control Using Fuzzy-Servoing Controller for Arc Welding Process.
  Reza Babazadeh Tili Fereshteh Akbarnejad Vahid Rostami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  61 - Optimization of the Ductile Properties of an Arc Welded Plate Based on the Yield Strength, Elongation and Modulus of Elasticity.
  Samuel Sada Joseph Achebo
  10.22094/joie.2021.1903358.1760
• Open Access Article
  • Abstract Page
  • Full-Text
  
  62 - Types of welding process and relationship with defective rate in structural fabrication for oil & gas project
  Mohd Amran Mohd Daril Abd. Rahim Sidek Mohamad Ikbar Abdul Wahab Khairanum Subari Sobia Irum Nohman Khan
  10.22094/joie.2023.1973923.2019
• Open Access Article
  • Abstract Page
  • Full-Text
  
  63 - CFD Modelling of Friction Stir Welding of Aluminum to Steel butt joint
  Hamed Aghajani Derazkola Majid Elyasi Morteza Hossienzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  64 - The Effect of Friction Stir Processing Speed Ratio on the Microstructure and Mechanical Properties of A 430 Ferritic Stainless Steel
  Ali Salemi Golezani S. M Arab Sh. Javadi Firooz Kargar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  65 - Simulation of Heat Transfer and Recrystallization in Aluminum Alloy AA 6070 by TIG Welding Method
  Mir Javad Mir Najd Gerami Eslam Ranjbarnodeh Mehdi Farajpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  66 - The Weldability Evaluation of Dissimilar Welds of AISI 347 Stainless Steel to ASTM A335 Low Alloy Steel by Gastungesten Arc Welding
  Iman Hajiannia Morteza Shamanian Masoud Kasiri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  67 - Dissimilar resistance spot welding of AISI 1075 eutectoid steel to AISI 201 stainless steel
  Mehdi Safari Hossein Mostaan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  68 - Statistical Approach on Corrosion Behavior of Dissimilar Welds of A387-Gr91/AISI316 Steels with PCGTAW Process
  Mohammad Jula Reza Dehmolaei Seyed Reza Alavi Zaree
• Open Access Article
  • Abstract Page
  • Full-Text
  
  69 - Microstructure and Mechanical Properties of the Friction Welded Joint between X53CrMnNiN219 and X45CrSi93 Stainless Steel
  khalil gheisari Mohammad Reza Abasi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  70 - Investigation of Roll Bonding between AA5083 Strips
  Mohammad Sedighi mohammad heydari vini Pedram Farhadipour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  71 - Friction Stir Welding of Al 2024 with Al 7075 Alloys and evaluate its structural and mechanical properties
  Sayedeh Zahra Anvari Saeed Rohani Mojarad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  72 - Study the effect of the friction stir process on the microstructure and mechanical behavior of the AZ31 as-cast alloy joint
  Amir Rezaee Iman Ebrahimzadeh Farhad Gharavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  73 - Experimental Investigation on the dissimilar laser weld joints between Inconel 625 Superalloy and AISI 430 Ferritic Stainless Steel
  Hossein Mostaan Mahdi Rafiei Mohammad Emadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  74 - Simultaneously Modeling and Optimization of Heat Affected Zone and Tensile Strength in GTAW Process Using Simulated Annealing Algorithm
  Meysam Beytolamani Masoud Azadi Moghaddam Farhad Kolahan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  75 - Robust Multi-Objective Optimization of Mechanical Properties of Friction Stir Welding Using Neural Network and Modified-NSGA-II
  Mostafa Akbari Hossein Rahimi Asiabaraki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  76 - Dissimilar DP780/DP980 Resistance Spot Welded joints: Microstructure, Mechanical Properties and Critical Diameter
  Bahman Valizadeh Mehdi Mansouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  77 - The Improvement of Mechanical Properties of the Incoloy 825 Weld Metal by Applying Electromagnetic Vibration
  Ali Pourjafar Reza Dehmolaei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  78 - Effect of Post-Weld Intercritical Annealing on the Microstructure and Tensile Properties of a Gas Tungsten Arc Welded DP700 Steel
  Hamid Ashrafi Sayyed Erfan Aghili
• Open Access Article
  • Abstract Page
  • Full-Text
  
  79 - Evaluation of GMAW Welded Joints in A36 Low-Alloy Marine Steel Sheets: Tensile Test, Hardness, and Fatigue Properties
  Mohammad reza Maraki Masoud Mahmoodi Milad Khodaei Hadi Tagimalek
• Open Access Article
  • Abstract Page
  • Full-Text
  
  80 - Optimization and utilization of semisolid casting process for semisolid welding of Al-6061 alloy
  M Hajihashemi M Shamanian B Niroumand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  81 - Bimetal friction stir welding of aluminum to magnesium
  P Pourahmad M Abbasi H.A Mehrabi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  82 - Heat Transfer Modelling in Wide Gap Rail Thermite Welding
  A Mohassela A. H Kokabi P Davamia E Ranjbarnodeh M Movahedia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  83 - Influence of shielding gas composition on weld structure in pulsed Nd: YAG laser welding
  M jokar F MalekGhaini M. J. Torkamany
• Open Access Article
  • Abstract Page
  • Full-Text
  
  84 - The effect of activating fluxes on 316L stainless steel weld joint characteristic in TIG welding using the Taguchi method
  E Ahmadi A.R Ebrahimi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  85 - Experimental Study of the Effect of Rotational Speed, Feed Rate, Lubricant and Tool Material in Friction Drilling of the Titanium Sheets
  Mehran Yazdani Nogarani Reza Nosouhi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  86 - Study the Percentage of Carbon and Ferrite in Layers of Steel (SA-516) by Strip Cladding with E316L
  Ahmad Afsari Dara Fazel Jafar Karimisharifabadi Vahid Mehrabi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  87 - Dissimilar Friction Stir Welding between Magnesium and Aluminum Alloys
  Mahdi Salari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  88 - Evaluation of Optimal Conditions, Microstructure, and Mechanical Properties of Aluminum to Copper Joints Welded by FSW
  Ahmad Afsari Shahin Heidari Jaleel Jafari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  89 - Experimental Investigation of One-pass and Two-pass Friction Stir Welding Process of Aluminum Alloy 6061 with and without Copper Foil
  Qadarat Mohammad Jassim Al-Issawii Maziar Mahdipour Jalilian Mahdi Karami Khorramabadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  90 - Investigating the Effect of Residual Stress on Fatigue Crack Propagation by Modified J-integral and Experimental Method
  Ali Moarrefzadeh Shahram Shahrooi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  91 - Optimizing the Implementation of a Robotic Welding System
  Fionn Foley Chris O’Donoghue Joseph Walsh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  92 - Thermal and Stress Analysis in Butt, T-shaped and Tubular Joints in the Welding Process of Dissimilar Parts
  Adel Tavabe Behdad Jahanbeen Seyed Mohammad Reza Nazemosadat Ahmad Afsari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  93 - Formability Study of Steel Tailor laser Welded Blanks (TWB) in Stretch Forming
  Mohammad Riahi Ahmad Amini Hossein Bisadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  94 - Numerical and Experimental Study of Geometrical Dimensions on Laser-TIG Hybrid Welding of Stainless Steel 1.4418
  Mahmoud Moradi Majid Ghoreishi Azam Rahmani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  95 - Manufacturing of Aluminum Thin Cylindrical Parts By Using Friction Stir Welding Method
  Ahmad Reza Sabet Hamid Montazerolghaem
• Open Access Article
  • Abstract Page
  • Full-Text
  
  96 - The Effect of Annealing Heat Treatment on the Bond of Explosivewelded Copper/Steel after the ECAR Process
  Mohammad Honarpisheh Ali Akbar Haddadi Hadi Mansouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  97 - Friction Stir Welding of Dissimilar Poly Methyl Methacrylate and Polycarbonate Sheets
  Mojtaba Rezaee Hajideh Omid Shapurgan Navid Molla Ramzani Essa Hasan Nejad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  98 - Simulation of Tool Rotation and Travelling Speed Effects on Friction Stir Welding of Ti-6Al-4V
  Hamed Aghajani Derazkola
• Open Access Article
  • Abstract Page
  • Full-Text
  
  99 - Effects of Tool Tilt Angle and Plunge Depth on Properties of Polycarbonate FSW Joint
  Hamidreza Mohammadi Kuhbanani Hesameddin Yasemi Hamed Aghajani Derazkola
• Open Access Article
  • Abstract Page
  • Full-Text
  
  100 - A Hybrid Thermal Assisted Friction Stir Welding Approach for PMMA Sheets
  Mojtaba Rezaee Hajideh Mohammadreza Farahani Masoud Ahmad Khanbeigi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  101 - Experimental Investigation and Analysis of Manufacturing Wind Turbine Blades Produced by Hydroforming of Aluminum Alloy AA5754
  Javad Shahbazi Karami Hamed Bakhtiarizade Mohsen Shahmoradi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  102 - Investigation of ECAR Routes on Mechanical Properties of Explosive-Welded Al-Cu Bimetal
  Mohammad Honarpisheh Mahdi Dehghani Sina Ghaffari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  103 - Improvement of Industrial Radiography for Defect Detection of Oil and Gas Pipelines in Weld Regions by Image Processing
  Ali Reza Karimian Monir Torabian Mohammad Reza Yazdchi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  104 - An Experimental Study to Investigate the Effect of Repair Welding Repetition at the Joint on the Tensile Strength of Welded Segment
  Ali Seyedkazemi mahmood mirzaaghaei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  105 - جوشکاری سوپر آلیاژ پایه نیکل روسوب سخت شونده
  محمد رضا محقق نیا
• Open Access Article
  • Abstract Page
  • Full-Text
  
  106 - مطالعه تجربی اثر قطر ناگت بر مقاومت کششی و برشی در نمونه های جوشکاری نقطه ای AISI 1008
  A. فدایی ا.ح محمودی آ. برزویی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  107 - Experimental Investigation of the Effect of Using Tools with Tapered Pins in Friction Stir Welding (FSW) of AA6061-T6 Aluminum Alloy
  Saleh Al Khatour Maziar Mahdipour Jalilian Mahdi Karami Khorramabadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  108 - Effects of alumina nanoparticles, number of stirring pass and rotational speed on the mechanical behavior of friction stir welded (FSW) magnesium alloy (AM60)
  Arash Behzadineghad Abbas mohassel Hamid Omidvar Nader Setoudeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  109 - Investigation the effects of SiC reinforcement incorporation on mechanical properties of friction stir welded AZ31 magnesium alloy
  AMIN ABDOLLAHZADEH Ali shokouhfar حمید امیدوار محمد علی صفرخانیان محمدرضا نادری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  110 - Comparison of Corrosion behavior of aluminium 6061 alloy joined by friction stir lap welding and gas tungsten arc lap welding methods
  reza bazarganlari ehsan vafa
• Open Access Article
  • Abstract Page
  • Full-Text
  
  111 - Similar and dissimilar 5754 and 6063 aluminum alloy joints by friction stir welding
  امین ربیعی زاده احمد افسری فرهاد ارغوانی فرناز احمدی کیسمی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  112 - Evaluation of Microstructure and Mechanical Properties of Friction Stir Lap Welded 6061 Aluminium Alloy at various welding speeds
  فرهاد غروی ایمان ابراهیم زاده علی سهیلی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  113 - Investigation of effect of tool geometry on formation of common defects, and mechanical properties of 5456 Aluminum alloy, in Friction Stir Lap Welded process
  MOHAMMADREZA NADERI محمد علی صفرخانیان امیر حسین کوکبی امین عبداله زاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  114 - Investigation of microstructure and mechanical properties of AISI304L Stainless Steel to ASTMA514 Steel joint by Gas Tungsten Arc Welding
  موسی توکلی عباس سعادت محمدرضا خانزاده قره شیران
• Open Access Article
  • Abstract Page
  • Full-Text
  
  115 - Study the microstructure and hardness of FSW of API 70 steel at the presence of TiO2 particles
  Rasoul Pouriamanesh KAMRAN Dehghani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  116 - Effect of Shoulder Surface Angle of Tool on Joint Properties in Friction Stir Welding of 5052 Aluminium Alloy
  فرهاد غروی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  117 - Dissimilar welding of Incoloy 825 to AISI 316L austenitic stainless steel and evaluation of Microstructure and Mechanical properties
  مهدی باباجانی مرتضی شمعانیان مسعود کثیری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  118 - Effect of Tool Rotation Speed on the Mechanical Properties and Corrosion Behavior of Dissimilar Friction Stir Welded of 5083 Aluminium Alloy and Commercially Pure Titanium
  Masoud Shabani بهروز شایق بروجنی رضا ابراهیمی کهریزسنگی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  119 - The effect of surface roughness and the current on the strength of stud welded pin
  محمد خدائی جواد مختاری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  120 - ارزیابی خواص مکانیکی جوش های غیر مشابه فولاد زنگ نزن AISI 347 به فولاد کم آلیاژ ASTM A335
  iman HAJIANNIA
• Open Access Article
  • Abstract Page
  • Full-Text
  
  121 - Investigation of Microstructure, Hardness and Intermetallic Compound in Friction stir Welding of AA6065 Aluminum Alloy to Copper
  مجید الیاسی Rahim Narimani Mortza Hosseinzadeh Hamed Aghajani Derazkola
• Open Access Article
  • Abstract Page
  • Full-Text
  
  122 - Investigation of 6061 aluminum alloy pulsed laser welding based on the physical models for prediction of hot cracks
  hossain ebrahimzadeh hassan farhangi seyed ali asghar akbari mousavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  123 - Friction Stir Welding of Ultrafine-Grained Al 1050: Investigation of Pin Geometry, Welding Atmosphere Temperature and Welding Speeds on the Mechanical Properties
  Morteza Hosseini Habib Danesh-Manesh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  124 - Experimental Study an improvement of Parameters Affecting Resistance Spot Welding Strength in Halogen lamps by Taguchi Statistical Method
  Lotfali Mozafari Vanani Sadegh Rahmati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  125 - Investigation of the welding pass numbers on structure, hardness and wear resistance of sheet welded by ESAB 85.65
  abbas saadat mohammad khalili parvar mohammad Reza khanzadeh ghareshiran
• Open Access Article
  • Abstract Page
  • Full-Text
  
  126 - Aluminum alloy (АМГ6М) joining by two processes of friction-stir and non-consumable Tungsten electrode welding and comparison of their mechanical and microstructure properties
  Aliasghar Torabi Tahmineh Ahmadi Afshin Shirali Mohammadreza Khanzadeh ghareshiran Majid Taghian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  127 - Effect of Interlayer Type on Mechanical Properties and Microstructure of the 6061 Aluminum Alloy Joint by Friction Stir Welding
  seyed amin kafaei Hamed Sabet Mohsen Ghanbari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  128 - Effect of Rotational Speed on Microstructure and Mechanical Properties of AA5456 Alloy Welded by FSW-Lap Joint
  mohamad ali safarkhanian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  129 - Evolution of the Microstructure and Mechanical Properties of Friction Stir Welded Ferrite-Martensite DP700 Dual Phase Steel
  Mahdi Mahmoudiniya Amir Hossein Kokabi Massoud goodarzi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  130 - Correlation of Microstructure with Mechanical Behavior of HSLA-100 Weld Metal Produced By GTAW Method
  Mahyar Darivandpour Reza Dehmolaei Khalil Ranjbar
  10.30495/apme.2021.1910558.2016
• Open Access Article
  • Abstract Page
  • Full-Text
  
  131 - Investigating the Effect of Tungsten Element on the Microstructure and Mechanical Properties of Fe-C-Ni Hard Coating
  Adel Mosadeghian hamid nazemy Mohammadreza Khanzadeh Gharahshiran Mansor SadeghiNasb
  10.30495/apme.2021.564781.1768
• Open Access Article
  • Abstract Page
  • Full-Text
  
  132 - Finite element simulation of the effect of the second pulse current on temperature distribution and nugget size in resistance spot welding of TRIP1100 steel
  Hamid Ashrafi Iman Hajiannia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  133 - Comparison of the effect of thermal cycles on phase transformation and structure in the heat-affected zone of pipeline steel welding
  Gholamreza Khalaj
• Open Access Article
  • Abstract Page
  • Full-Text
  
  134 - Investigation of the effect of thermal treatment after welding on the corrosion properties of the interconnecting joint wall of Cu / SS 304 sheets
  Ali Ebrahimi Akbarabadi Abbas Saadat Mohammadreza Khanzadeh hamid bakhtiari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  135 - Effect of Friction Stir Welding (FSW) on Corrosion Behavior of Pure Copper in 3.5 % wt NaCl Solution
  amirhossein taheri Arash Fattah-alhosseini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  136 - بهینه سازی پارامترهای جوشکاری قوس تنگستن گاز پالسی در اتصال غیرمشابه مونل۴۰۰ و فولاد زنگ نزن آستنیتیL۳۱۶
  علی خلیلی مسعود کثیری عسگرانی مرتضی شمعانیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  137 - ارائه یک طرح جدید جهت اتصال لوله‌های آلومینیومی در سازه‌های زیر سطحی
  غلامرضا مزروعی علی حیدری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  138 - بررسی اثر سرعت خطی و دورانی ابزار بر روی جریان مواد و تولید حرارت در جوشکاری اصطکاکی اغتشاشی پلی متیل متاکریلات (PMMA)
  حامد آقاجانی درازکلا
• Open Access Article
  • Abstract Page
  • Full-Text
  
  139 - بهینه سازی پارامترهای جوشکاری فولاد کم‌کربن EN 10130 به روش جوشکاری اصطکاکی-اغتشاشی
  اکبر علیمحمدی مسعود کثیری مسعود افرند حسین نوروزی فروشانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  140 - The effect of explosive welding variables on corrosion behavior of 304 stainless steel–copper joint in 3.5% NaCl solution concentration environment
  MohammadReza Khanzadeh Reza Peykari Hamid Bakhtiari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  141 - Effect of friction stir welding parameters of aluminum alloy tubes on succeeding rotary draw bending
  Alireza Soleymanipoor Hamid Montazerolghaem Mohsen Loh-mousavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  142 - طرح ابتکاری مدل معادل برای شبیه‌سازی فرایند جوشکاری
  علی حیدری محمدرضا فروزان جعفر گلستانه
• Open Access Article
  • Abstract Page
  • Full-Text
  
  143 - بررسی تجربی اثر پارامترهای جوشکاری صفحه داغ بر چقرمگی شکست و استحکام کششی درز جوش قطعات ترموپلاستیکی
  امیر هوشمندپور عبدالمحمد رضاوند مهدی نظری مرویان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  144 - Refurbishing Inconel 738 blades in GE-Frame5 gas turbines through laser cladding and welding
  Peyman Toosi Hamid Zarepour Mohammad-Ali  Rezaei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  145 - Investigation the weld quality characterizations and temperature field in laser welding of dissimilar Nickle-base alloy Inconel 600 and duplex stainless steel
  Ahmad Soleimani Mohammad Akbari Arash Karimipour Amir Homayoun Meghdadi Reza Nosouhi
  10.71939/jsme.2024.1119530
• Open Access Article
  • Abstract Page
  • Full-Text
  
  146 - Investigating the effect of post-weld heat treatment on the corrosion properties of the explosive welded three-layer joint of Cu/Al/Cu
  Heydar Ali Zamani Mohammad Reza Khanzadeh Ali  Bakhtiari Hossein Paydar
  10.71939/jsme.2024.1119738
• Open Access Article
  • Abstract Page
  • Full-Text
  
  147 - Effect of Filler Metal Type on the Microstructure of Welded Joints of HP Heat-Resistant Steel Modified by Niobium
  Jamal Hussain Mansoor Reza Dehmolaei Mostafa Eskandari Seyed Reza Alavi Zaree
  10.71670/jmatpro.2024.1122429
• Open Access Article
  • Abstract Page
  • Full-Text
  
  148 - Numerical and Experimental Analysis of Temperature Field, Deformation, and Residual Stress in Two-Stage Single-Pulse Sub-Powder Welding Joints
  Hamid Mozafari
  10.71762/dyhz-qx27
• Open Access Article
  • Abstract Page
  • Full-Text
  
  149 - Comparison of the Microstructure and Mechanical Behavior of the Welding Zone of Aluminum Alloy 5754 by FSW and TIG Methods
  Esmaeil  Zarei Ahmad Afsari Eshagh  Saharkhiz Seyed Kambiz  Ghaemi Osgouie
  10.71762/7mt5-v498
• Open Access Article
  • Abstract Page
  • Full-Text
  
  150 - Investigating on effect of heat treatment on microstructure and metallurgical properties of three layers explosively bonded Cu/Al/Cu plates
  اکبر Soltani Dehnavi M.R Khanzadeh Gharah shiran عباس Saadat
• Open Access Article
  • Abstract Page
  • Full-Text
  
  151 - An investigation on the effects of interpass temperature on corrosion behavior of weld metal of Hadfield high carbon steel weld joint
  مسعود Sabzi زهره Balak
• Open Access Article
  • Abstract Page
  • Full-Text
  
  152 - Influence of filler metal on the microstructure of dissimilar welds between UNS S32205 duplex stainless steel and ASTM A517 Quench and tempered steel
  A.R Forough مرتضی Shamanian مسعود Kasiri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  153 - protrusion friction stir spot welding: the microstructure and mechanical properties of Al 6061 alloy
  omid zarei mostafa mosavizade fateme zarghani hamed zarei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  154 - Investigation of the effect of current intensity and frequency in PC-GTAW on microstructural evolutions of weld joints of Hastelloy B-2 superalloy
  Ali Heidary Moghadam mehdi khalasi dezfuli mehdi ghobeiti hasab
• Open Access Article
  • Abstract Page
  • Full-Text
  
  155 - Influence of Friction Stir Welding Parameters on Mechanical and Metallurgical Properties in Lap Joints of 5456Aluminum Alloy
  منصور مردعلی زاده محمد علی صفرخانیان محمد رضا سلیمانی یزدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  156 - An Investigation of different parameters on the penetration depth and welding width of Ti-6Al-4V alloy by plasma arc welding
  Yaser Vahidshad Amir Hossein Khodabakhshi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  157 - Investigation of High Frequency Resistance Welding (HFRW) Variables on microstructure and mechanical properties of dissimilar joints between chromium-molybdenum low alloy steel tubes to chromium high alloy steels
  MOHAMMAD SADEGHI Hamed Sabet HOSAIEN RASAVI
• Open Access Article
  • Abstract Page
  • Full-Text
  
  158 - Investigating the effect of degree of dilution and interlayer on the abrasion resistance of the hard-wired coated layer of Fe-Cr-C based on SMAW method on plane carbon steel
  farhad abdi hamed sabet ahmad khorampour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  159 - Modification of mechanical properties of friction stir welded AM60 magnesium alloy with changing rotational speed and addition of nano alumina particles
  Arash Behzadinezhad Abbas mohassel Hamid Omidvar Nader Setoudeh
  10.30495/jnm.2022.28682.1932
• Open Access Article
  • Abstract Page
  • Full-Text
  
  160 - Investigation of microstructure and mechanical properties of welding metal of A516-Gr70 steel in the presence of TiO2 by SAW method
  Reza Amini Najafabadi Abbas Asadi
  10.30495/jnm.2022.27507.1912
• Open Access Article
  • Abstract Page
  • Full-Text
  
  161 - Investigation of corrosion resistance of Ti-6Al-4V alloy welding zone Welded by TIG method
  mehdi kabiri laghab majid belbasi mohamadamar mofid
  10.30495/jnm.2021.24515.1859
• Open Access Article
  • Abstract Page
  • Full-Text
  
  162 - The effect of pin shape on microstructure and mechanical properties of HA-Ti surface composites produced by FSP method
  Amirhosein Shahbaz Mehrdad Abbasi Hamed Sabet
  10.30495/jnm.2024.32961.2027
• Open Access Article
  • Abstract Page
  • Full-Text
  
  163 - Effect of the shoulder size and dwell time on the static Strength and fracture mode of projection friction stir spot welded 2024 aluminum alloy
  F. zarghani seid m. mousavizade G.R Ebrahimi H.R. Ezatpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  164 - Determination Optimum Boron Quantity Effect on Low Temperature Impact Energy of Mild Steel Weld Metal that Fabricated by Submerge Arc Welding (SAW)
  Sh Shafinia Sh Mirdamadi حامد Sabet S. R Amirabadizade
• Open Access Article
  • Abstract Page
  • Full-Text
  
  165 - Investigating the Effects of Heat Treatment in the Microstructure and Metallurgical Properties of the Explosive Welding of 304 Stainless Steel and CK45 Carbon Steel
  M. Allah Dadi M.R. Khanzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  166 - Fabrication of Aluminum Foam by ARB and Investigation on Its Friction Stir Welded Joint Properties
  S.J موسوی دولت آبادی S. توحید
• Open Access Article
  • Abstract Page
  • Full-Text
  
  167 - Investigation of Filler Metal on the Mechanical and Metallurgical Properties of Welding- Brazing Hybrid Joining of Aluminium to Ggalvanized Steel
  M. Zarooni R. Eslami-Farsani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  168 - Mechanical and Physical Properties Laser and GTA Welding of Commercial Pure Titanium
  S.GH. رضوی M. سبکتکین ریزی M. طاهری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  169 - Effect of Ultrasonic Impact Treatment on Fatigue Behavior of Steel Welded Pipes in Petrochemical Corrosive Environment
  M. Daavari S. A. SadoughVanini Gh. A. Ashouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  170 - A Survey of Mechanism and Kinetic of Oxidation of Welding Lines in Austenitic Stainless Steel AISI321
  Sh. Soltaninzhad R. Ebrahimi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  171 - Microstructure, Hardness and Wear Resistance of the Hard Layer Containing Silicon Carbide Particles on ASTM A106 Steel Produced by GTAW Welding
  H. Mazaheri A.R. Alaei M. fazel