Evaluation of Performance of Resistance Spot Welded Joints with Different Parameters in Advanced High Strength TRIP Steel

Subject Areas : Journal of Environmental Friendly Materials

I. Hajiannia ¹ , R. Ashiri ² , M. R. Pakmanesh ³ , M. Shamanian ⁴ , M. Atapour ⁵

1 - Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran
2 - Department of Materials Science and Engineering, Dezful Branch, Islamic Azad University, Dezful, Iran
3 - Iran Institutes of Materials and Energy, Iranian Space Research Center, Isfahan, Iran
4 - Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran
5 - Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran

Received: 2018-08-21 Accepted : 2019-03-15 Published : 2019-03-15

Keywords: Failure Mode, Mechanical Properties, Resistance spot welding, TRIP Steel,

References:

[1] S. Chatterjee: Transformations in TRIP-Assisted Steels: Microstructure and Properties, Darwin College: University of Cambridge at Cambridge, (2006).

[2] American Iron and Steel Institute, General Motors-AISI AAC Advanced High Strength Steel Repairability Study Phase II Final Report, (2015).

[3] Amirthalingam M. Microstructural Development during Welding of TRIP Steels.  Delft: Delft University of Technology at Delft, (2010).

[4] L. Zhao, M. K. Wibowo, M. J. M. Hermans,S. M. C. Van Bohemen, J. Sietma, J. Mater. Process. Technol., 209(2006), 5286.

[5] S. Brauser, L. A. Pepke, G. Weber and M. Rethmeier, Mater. Sci. Eng., A 527(2010), 7099.

[6] M. I. Khan, M. L. Kuntz, E. Biro and Y. Zhou, Mater. Trans., 49(2008), 1629.

[7] I. Hajiannia, M. Shamanian, M. Atapour, E. Ghassemali and N. Saeidi, Trans. Indian Inst. Met. 71(2018), 1363.

[8] Russo Spena P, De Maddis M, D’Antonio G, Lombardi, Metals, 6 (2016), 1.

[10] R. Ohashi, Weld World, 55(2011), 2.

[11] H. Gaul, S. Brauser, G. Weber and M. Rethmeier, Weld World, 55(2011), 99.

[12] G. Weber, S. Goklo, Weld World, 50(2006), 3.

[13] J. Pakkanen, R. Vallant, M. Kicin, Weld World, 60(2016), 3.

[14] M. Pouranvari, S. M. Mousavizadeh, Mat. Tech., 47(2013), 771.

[15] Z. Hou, S. Kimb, Y. Wang, C. Li and C. Chen, J. Mater. Process. Technol., 185(2007), 160.

[16] V. H. Hernandez Baltazar, S. K. Panda, M. L. Kuntz and Y. Zhou, Mater. Let., 64(2010), 207.

[17] K. Zhou, and CAI, J. Appl. Phys., 116(2014) 084902.