Effects of Shielding Gas on the Depth, Width and Hardness of 17-4PH Stainless Steel during TIG Welding

Subject Areas : Journal of Environmental Friendly Materials

S, M  Hosseini Farzaneh ¹ (Department of Petroleum, Mining and Materials Engineering, Tehran Central Branch, Islamic Azad University, Tehran, Iran.)
M  Belbasi ² (Department of Petroleum, Mining and Materials Engineering, Tehran Central Branch, Islamic Azad University, Tehran, Iran.)

Received: 2020-01-15 Accepted : 2020-03-18 Published : 2020-06-01

Keywords: Hardness, Microstructure, penetration, 17-4PH stainless steel, TIG Welding,

References:

[1] A. Gharebaghi, Precipitation Study in a High Temperature Austenitic Stainless Steel using Low Voltage Energy Dispersive X-ray Spectroscopy. Royal Institute of technology, Sweden, (2012).

[2] F. Christien and R. Le Gall, Scr. Mater., 48, (2003), 11.

[3] ASM Metals Handbook, "Metallography and Microstructures, Stainless Steel Casting Alloys", Vol. 9, (2004).

[4] J. C. Lippold and D. J. Kotecki, Intro. Mater. Sci., 376. Wiley-VCH, (2005).

[5] 17-4PH Specification Sheet, Sandmeyer Steel Company, PA.

[6] C. R. Das, H. C. Dey, G. Srinivasan, S. K. Albert, A. K. Bhaduri and A. Dasgupta, Sci. Technol. Weld. Joi., 11, 52006, (2006), 502.

[7] P. Maj, B. Adamczyk-Cieslak, M. Lewczuk, J. Mizera, S. Kut and T. Mrugala, J. Mater. Eng. Perf., (2018), 1;27(12):6435-42.

[8] J. Ma, MM. Atabaki, W. Liu, R. Pillai, B. Kumar, U. Vasudevan and R. Kovacevic, Opt. Laser Technol., (2016), 1;82, 38.

[9] Crown Er630 (17-4 PH) data sheet, Crown Alloys Company.

[10] Evans RM, Martin DC, Vagi JJ. Welding of precipitation-hardening stainless steels. NASA Marshall Space Flight Center, 1968.

[11] B. Zarei, H. TaghipourArmaki, H. Shadi, A. Moradi, B. Delikhoon, M. Karami et al., Welding and Coating by Shielding Gas, Iran Course Book Publication Company, Tehran, Iran, 1th ed., 2018.

[12] I. Bitharas, S. W. Campbell, A. M. Galloway, N. A. McPherson and A. J. Moore, Mater. Des., (2016), 5;91:424-31.

[13] W. Liu, J. Ma, M. M. Atabaki, R. Pillai, B. Kumar, U. Vasudevan, H. Sreshta and R. Kovacevic, Laser. Manuf. Mater. Process., (2015), 1;2(2),74.

[14] S. A. HoseiniHoseinabad, Sch. Metall. Mater. Eng., (2008), 119.

[15] M. B. Balajaddeh and H. Naffakh-Moosavy, Opt. Laser. Technol., (2019), 1;119:105651.

[16] A. R. Sufizadeh and S. A. A. AkbariMusavi, Metall. Eng. Soci. Iranian Fdy. men, 2008.

[17] F. TatiKhaniverdi, M. R. KarimiNoori and M. Belbasi, Effect of Welding Parameters on Depth of Penetration and Depth to Width Ratio in TIG Welding of Ti-6Al-4V Alloy, 1st National Conference on Mechanical Engineering of Iran, Shiraz, Iran, (2014).

[18] N. R. Mandal, Aluminium welding. Woodhead publishing; (2001) Jan 15.

[19] Y. Najafi, F. MalekGhaini, Y. Palizdar and S. Gholami, J. Weld. Sci. Technol. of Iran., (2016), 2(1), 69.