Effects of Welding Cycles on Microstructural Characteristics and Mechanical Properties of SAF 2507 Super Duplex Stainless Steel

Subject Areas : Journal of Environmental Friendly Materials

M. A. Beheshty ¹ , E. H. Dehkordi ² , K. Zarrin Naghsh ³ , M. R. B. Marnany ⁴

1 - Advanced Materials Research Center, Department of Materials Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
2 - Advanced Materials Research Center, Department of Materials Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
3 - Advanced Materials Research Center, Department of Materials Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
4 - Department of Materials Engineering, Tehran University, Tehran, Iran

Received: 2018-05-08 Accepted : 2018-06-20 Published : 2018-09-01

Keywords: Mechanical Properties, Repair Welding, Duplex Stainless Steel, SAF 2507 SDSS (UNS S32750), Microstructural Characteristics, Intermetallic phases,

References:

[1] M. I. M. Bassiouni, "Evaluation of the microstructure and localized corrosion behavior of AISI 2507 super duplex stainless steel  welds ", Ph.D. thesis, School of civil, environmental & chemical engineering, RMIT University, March 2012.

[2] J.Charles Super duplex stainless steels: Structure and properties. Proc. Duplex Stainless Steels 91. Les Editions de Physique, F-91944 Les Cedex, (1991) 23-48. France,

[3] M. Al-Rabie, "Observation of stress corrosion cracking behavior in super duplex stainless", Ph.D. thesis, School of Materials, University of Manchester, 2011.

[4] U. Obi, "Effect of aging on phase evolution, mechanical and corrosion properties of a high tungsten super duplex stainless steel", Ph.D. thesis, School of Engineering, University of Aberdeen, February 2015.

[5] API Technical Report 938-C. 2005. Use of Duplex Stainless Steels in the Oil Refining Industry:American Petroleum Institute: First Edition. Washington, D.C.

[6] K. D.Ramkumar, G. Thiruvengatam, S. P. Sudharsan, D. Mishra, N. Arivazhagan and R. Sridhar, Mat. Des., 60, 2014, 125.

[7] K.D.Ramkumar, D. Mishra, G. Thiruvengatam, S.P. Sudharsan, T. Harsha Mohan, V. Saxena, R. Pandey and N. Arivazhagan, Bull. Mater. Sci, 38(4), 2015,837.

[8] Hua Huang, Jing-Hui Jin, Zhong-Ping Ding, Springer Int. Publ.Switzerland, 2015,493.

[9] Villalobos, Albiter, Maldonado, RevistaMatéria, 14(3), 2009,1061.

[10] K. D. Ramkumar, D. Mishra, B. Ganesh Raj, M.K. Vignesh, G. Thiruvengatam, SP. Sudharshan, N. Arivazhagan, N. Sivashanmugam and A. M. Rabel, Mater. Des. , 2014.

[11] V. A. Hosseini, M. Asunción Valiente Bermejo, J. Gårdstam, K. Hurtig, L.Karlsson, Int. Inst. Welding, 2016.

[12] K. D.Ramkumar, A. Singh, S. Raghuvanshi, A. Bajpai, T. Solanki, M. Arivarasu, N. Arivazhagan and S. Narayanan, J. Manuf. Processes, 2015.

[13] N.Pettersson, Rachel F.A. Pettersson and S. Wessman, The Minerals, Met.  Mater. Society ASM Int., 2014.

[14] M. Rahmani, A. Eghlimi and M.Shamanian, J. of mater. Eng. and perform., 2014.

[15] N.Llorca-Isern, H. López-Luque, I. López-Jiménez andM. V. Biezma, Mater. Character. , (112), 2015,20.

[16] H. Huang, Jing-Hui Jin and Zhong-Ping Ding, Springer int. publ. Switzerland, 2015.

[17] P. Paulraj, R. Garg, Manuf. Rev.,02(29) 2015.

[18] G. C. de Souza, A. L. da Silva, S. S. M. Tavares, J. M. Pardal, M. L. R. Ferreira and I. CardoteFilho, Welding Int., 30(6) 2016, 432.

[19] Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications, Designation: A 240/A 240M – 04a, ASTM International.

[20] AWS A5.9/A5.9M, Specification for Bare Stainless Steel Welding Electrodes and Rods.

[21] ASME SEC IX, Welding Procedure and performance qualification, American Society of Mechanical Engineers, 2017.

[22] J.O. Nilsson, L. Karlsson, and J. O. Andersson, Steel Weld Metal, Mater. Sci. Technol., 11(3), 1995, 276.

[23] A. Eghlimi, M. Shamanian, and K. Raeissi, J. Mater. Eng. Perform, 22(12), 2013, 3657.

[24] M. Martins, S.M. Rossitti, M. Ritoni, and L.C. Casteletti, Mater. Charact, 58(10), 2007, 909.

[25] API 582 Ed. 3, Welding Guidelines for the Chemical, Oil, And Gas Industries from SAI Global.

[26] ASTM E3 – 11, Standard Guide for Preparation of Metallographic Specimens

[27] ASTM E562 – 11, Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count.

[28] ANSI/AWS A4. 2M/A4. 2-1997, Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic andDuplex Ferritic Austenitic Stainless Steel Weld Metal.

[29] API TECHNICAL REPORT 938-C, Use of Duplex Stainless Steels in the Oil Refining Industry, Second Edition, April 2011

[30] ASTM A370 – 17, Standard Test Methods and Definitions for Mechanical Testing of Steel Products.

[31] ASTM E92 – 17, Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials.

[32] ASTM G30 – 97(2016), Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens.

[33] ISO 7539-10:2013, Corrosion of metals and alloys, Stress corrosion testing, Part 10: Reverse U-bend method.

[34] ASTM A923 – 14, Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels.

[35] ASME Boiler and Pressure Vessel Code, Section VIII, Rules for Construction of Pressure Vessels, Div. 1, UG-84, American Society of Mechanical Engineers, 2017.

[36] C. S. Wiesner, Duplex Stainless Steels 97, Proceedings of the 5th World Conference, Maastricht, The Netherlands, 21-23 October 1997, Zutphen, KCI Publishing, 1997, Book 2, pp.979-990.

[37] ASME B31.3, Process Piping Code, American Society of Mechanical Engineers, 2016.

[38] NORSOK M-601:2016 Welding and Inspection of piping.