Corrosion Behavior Characterization of the Nugget Zone in Copper/Brass Metals of Dissimilar Friction Stir Welded Lap Joints
Subject Areas : Mechanical Engineeringkamran amini 1 , Farhad Gharavi 2
1 - Young Researchers and Elite Club, Tiran Branch,
Islamic Azad University, Isfahan, Iran
Center for Advanced Engineering Research, Majlesi Branch,
Islamic Azad University, Isfahan, Iran
2 - Department of Materials Engineering,
Sirjan Branch, Islamic Azad University, Sirjan, Iran
Keywords:
Abstract :
[1] Cowie, J. G., Kundig, K. J. A., “Copper and Copper Alloysˮ, In: Myer K (ed.) Handbook of Mechanical Engineers. Wiley Inter-Science., 2006, pp. 117- 220.
[2] Simonović, A. T., Radovanović, M. B., Petrović, M. B., Antonijević, M. M., and Milić, S. M., “Effect of Purine on Brass Behavior in the Neutral and Alkaline Sulphate Solutionsˮ, International Journal of Electrochemical Science, Vol. 7, 2012, pp.11796 – 11810.
[3] Erdem M., “Examining the Structure and Mechanical Properties of Copper-Brass Plates Joined by Friction Stir Weldingˮ, International Journal of Advanced Manufacturing Technology, Vol. 76, 2015, pp. 1583–1592.
[4] Huang, Y. X., Dong, S. S., Zhou, L., Zhou, W. L., Feng, J.C., and He, W. X., “The Effect of Rotational Speed on the Microstructure and Mechanical Properties of Dissimilar Friction Stir-Welded Copper/Brass Metalsˮ, International Journal of Advanced Manufacturing Technology, DOI 10.1007/s00170-015-7792-9.
[5] Murch, M. G., Templesmith, P., Dawes, C. J., Thomas, W. M., Nicholas, E. D., and Need Ham, J. C., “Friction stir weldingˮ, International Patent Application, 1991, No. PCT/GB92102203 and GB Patent.
[6] Meran, C., “The Joint Properties of Brass Plates Caused by Friction Stir Weldingˮ, Material and Design., Vol. 27, 2006, pp. 719–726.
[7] Gharavi, F., Matori, K. A., Yunus, R., and Othman, N. K., “Study the Nugget Zone Corrosion Behavior in the Friction Stir Welded Lap Joints of 6061-T6 Aluminum Alloyˮ, Mater. Rese., Vol. 17, No. 6, 2014, PP. 1563-1574.
[8] Amini, K., Gharavi, F., “The Impact of Welding Speed on the Corrosion Behavior of Friction Stir Welded AA5086 Aluminium Alloyˮ, Journal of Central South University, Vol. 23, 2016, pp. 1301-1311.
[9] Tan, K. L., Hsieh, A. K., Feng, Y., Siow, K. S., and Teo, W. K., “The Copper Corrosion Mechanisms and Products of in Aqueous Solutions at Various pH Valuesˮ, Corrosion., Vol. 53, No. 5, 1997, pp. 389-398.
[10] Ahmed, T. M., Tromans, D., and Alfantazi, A. M., “The Corrosion Behavior of Copper Alloys in Chloride Mediaˮ, Mater. Des., Vol. 30, 2009, pp. 2425–2430.
[11] Kilincceker, G., Erbil, M., “The Effect of Phosphate Ions on the Electrochemical Behavior of Brass in Sulphate Solutions”, Material Chemistry and Physics., Vol. 119, 2010, pp. 30–39.
[12] Burstein, G. T., “Tafel’s Equation: One hundred years (1905–2005)ˮ, Corrosion Science, Vol. 47, 2005, pp. 2858.
[13] Tuthill, A. H., Todd, B., and Oldfield, J., “Study the Experiments with Copper Alloy Tubing Water Boxes and Pipes in the MSF Desalination Plantsˮ, International Congress on Desalination and Water Re-use, 1997, pp. 251-270.
[14] Griesss, J. C., Bacarella, A. L., “Anodic Dissolution of Cu in Flowing NaCl Solutions between 25 and 175 °Cˮ, Journal of Electrochemical Society, Vol. 120, 1973, pp. 459–65.
[15] Tromans, D., Silva, J. C., “Copper Behavior in Acidic Sulfate Solution: Compared with Acidic Chloride Solution, Corrosion, Vol. 53, 1997, pp. 171–8.
[16] Tromans, D., Sun, R., “Anodic Polarization Behavior of Copper in Aqueous Chloride/ Benzotriazole solutions, Journal of Electrochemical Society., Vol. 138, 1991, pp. 3235–55.
[17] Matthews, A., Liu, C., Bi, Q., and Leyland, A., “The Electrochemical Impedance Spectroscopic Study of the Corrosion Behavior of PVD Coated Steels in 0.5 N NaCl Aqueous Solution: Part I. Establishment of Equivalent Circuits for EIS Data Modeling, Corrosion Science, Vol. 45, 2003, pp. 1243–1256.
