Subject Areas : Surface Engineering

Peyman Toosi ¹ , Hamid Zarepour ² , Mohammad-Ali Rezaei ³

1 - Modern Manufacturing Technologies Research Center, Department of Mechanical Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
2 - Modern Manufacturing Technologies Research Center, Department of Mechanical Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
3 - Department of Materials Engineering, Tarbiat Modares University, Tehran, Iran

Received: 2024-04-08 Accepted : 2024-12-07 Published : 2024-12-12

Keywords:

References:

[1] Salwan GK, Subbarao R, Mondal S (2021) Comparison and selection of suitable materials applicable for gas turbine blades. Mater Today Proc 46:8864–8870. https://doi.org/10.1016/j.matpr.2021.05.003

[2] Liu R, Wang Z, Sparks T, Liou F, Newkirk J (2017) Aerospace applications of laser additive manufacturing. In: Brandt M (ed) Laser Additive Manufacturing. Woodhead Publishing Elsevier, pp. 351–371. https://doi.org/10.1016/B978-0-08-100433-3.00013-0.
[3] Kataria R, Singh RP, Sharma P, Phanden RK (2021) Welding of super alloys: A review. Mater Today Proc 38:265–268. https://doi.org/10.1016/j.matpr.2020.07.198

[4] AL-Nafeay RH, AL-Roubaiy AO, Omidvar H (2021) Overview of joining and repairing techniques of Ni-based superalloy for industrial gas turbine applications. IOP Conf Ser: Mater Sci Eng 1094:012141

[5] Carter TJ (2005) Common failures in gas turbine blades. Eng Fail Anal 12:237–247. https://doi.org/10.1016/j.engfailanal.2004.07.004

[6] Su CY, Chou CP, Wu BC, Lih WC (1997) Plasma transferred arc repair welding of the nickel-base superalloy IN-738LC. J Mater Eng Perform 6:619–627. https://doi.org/10.1007/s11665-997-0055-7

[7] Arjakine N, Bruck J, Gru¨ger B, Seeger DM, Wilkenhoener R (2008) Advanced weld repair of gas turbine hot section components. ASME Turbo Expo 2008: Power for Land, Sea, and Air (ASMEDC) 1: 559-564. https://doi.org/10.1115/GT2008-51534

[8] Xu H, Huang H, Liu Z (2021) Influence of plasma transferred arc remelting on microstructure and properties of PTAW-deposited Ni-based overlay coating. J Therm Spray Tech 30:946–958. https://doi.org/10.1007/S11666-021-01183-1

[9] Banerjee K, Richards NL, Chaturvedi MC (2005) Effect of filler alloys on heat-affected zone cracking in preweld heat-treated IN-738 LC gas-tungsten-arc welds. Metall Mater Trans A 36:1881–1890. https://doi.org/10.1007/s11661-005-0051-1

[10] Durocher J, Richards NL (2007) Characterization of the micro-welding process for repair of nickel base superalloys. J Mater Eng Perform 16:710–719. https://doi.org/10.1007/s11665-007-9112-5

[11] Keivanloo A, Naffakh-Moosavy H, Miresmaeili R (2021) The effect of pulsed laser welding on hot cracking susceptible region size and weld pool internal geometry of Inconel 718: Numerical and experimental approaches. CIRP J Manuf Sci Technol 35:787–794. https://doi.org/10.1016/j.cirpj.2021.09.001

[12] Lippold JC, Kiser SD, DuPont JN (2011) Welding metallurgy and weldability of nickel-base alloys. John Wiley & Sons, Hoboken, New Jersey

[13] Zhong M, Liu W (2010) Laser surface cladding: the state of the art and challenges. Proc Inst Mech Eng, Part C: J Mech Eng Sci 224:1041–1060. https://doi.org/10.1243/09544062JMES17

[14] Bielenin M, Bergmann JP, Sieber P (2017) Repair of nickel-based superalloys by pulsed Nd:YAG welding with wire feeding. Proc Lasers in Manuf Conf (LiM 2017) München, Germany

[15] Brandt M, Sun S, Alam N, Bendeich P, Bishop A (2009) Laser cladding repair of turbine blades in power plants: from research to commercialisation. Int Heat Treat Surf Eng 3:105–14. https://doi.org/10.1179/174951409X12542264513843

[16] Chen C, Wu HC, Chiang MF. Laser cladding in repair of IN738 turbine blades (2008) Int Heat Treat Surf Eng 2:140–6. https://doi.org/10.1179/174951508X446484

[17] Taheri M, Halvaee A, Kashani-Bozorg SF (2019) Effect of Nd:YAG pulsed-laser welding parameters on microstructure and mechanical properties of GTD-111 superalloy joint. Mater Res Express 6:076549. https://doi.org/10.1088/2053-1591/ab1534

[18] Kou S (2003) Welding metallurgy, 3rd edn. John Wiley & Sons, Hoboken, New Jersey

[19] Cherif S, Zakaria B (2018) Effect of welding current on microstructures and mechanical properties of welded Ni-base superalloy INC738LC. World J Eng 15:14–20. https://doi.org/10.1108/WJE-03-2017-0064/FULL/XML

[20] Taheri M, Halvaee A, Golezani AS, Kashi AA (2020) Investigation of melting rate in welding of IN738 Nickel-based superalloy by Nd:YAG pulsed-laser method. Eng Res Express 2:045025. https://doi.org/10.1088/2631-8695/abcd0d

[21] Rezaei MA, Naffakh-Moosavy H (2018) The effect of pre-cold treatment on microstructure, weldability and mechanical properties in laser welding of superalloys. J Manuf Process 34:339–48. https://doi.org/10.1016/j.jmapro.2018.06.018

[22] Taheri M, Kashani-Bozorg SF, Alizadeh A, Beni MH, Jam JE, Khorram A (2021) Analysis of liquation and solidification cracks in the electron beam welding of GTD-111 nickel-base superalloy joint. Mater Res Express 8: 076507. https://doi.org/10.1088/2053-1591/ac1007

[23] Han S-W, Cho W-I, Na S-J, Kim C-H (2013) Influence of driving forces on weld pool dynamics in GTA and laser welding. Weld World 57:257–264. https://doi.org/10.1007/s40194-012-0020-4