Investigation of The Effects of Process Parameters on The Welding Line Movement in Deep Drawing of Tailor Welded Blanks

Subject Areas : Mechanical Engineering

Ali Fazli ¹

1 - Department of Mechanical Engineering, Faculty of Engineering and Technology, Imam Khomeini International University, Qazvin, Iran

Received: 2015-12-16 Accepted : 2017-10-31 Published : 2016-06-01

Keywords:

References:

[1] Choi, Y., Heo, Y., Kim, H. Y., Seo, D., “Investigations of weld-line movements for the deep drawing process of tailor welded blanks”, Journal of Material Processing Technology, Vol.108, No. 1, 2000, pp. 1-7.

[2] Kinsey, B., Liu, Z., Cao, J., “A novel forming technology for tailor-welded blanks”, Journal of Material Processing Technology, Vol. 99, No. 1-3, 2000, pp. 145-153.

[3] Meinders, T., Van den Berg, A., HueÂtink, J., “Deep drawing simulations of Tailored Blanks and experimental verification”, Journal of Material Processing Technology, Vol. 103, No. 1, 2000, pp. 65-73.

[4] Heo, Y. M., Wang, S. H., et al. “The effect of the drawbead dimensions on the weld-line movements in the deep drawing of tailor-welded blanks”, Journal of Material Processing Technology, Vol. 113, No. 1-3, 2001, pp. 686–691.

[5] He, S., Wu, X., Hu, S. J., “Formability enhancement for tailor-welded blanks using blank holding force control”, Journal of Manufacturing Science and Engineering: Transaction of ASME, Vol. 125, No. 3, 2003, pp. 461–467.

[6] Kinsey, B. L., Cao, J., “An Analytical Model for Tailor Welded Blank Forming”, Journal of Manufacturing Science and Engineering: Transaction of ASME, Vol. 125, No. 2, 2003, pp. 344–351.

[7] Bravar, M. N., Kinsey, B. L., “Analytical determination of initial weld line position for tailor welded blank forming”, North American Manufacturing Research Institution of SME, Vol. 32, No. 1, 2004, pp. 597–604.

[8] Ku, T. W., Kang B. S., Park H. J., “Tailored blank design and prediction of weld line movement using the backward tracing scheme of finite element method”, International Journal of Advanced Manufacturing Technology, Vol. 25, No. 1, 2005, pp. 17–25.

[9] Chan, L. C., Cheng, C. H., Chan, S. M., Lee, T. C., Chow, C. L., “Formability Analysis of Tailor-Welded Blanks of Different Thickness Ratios”, Journal of Manufacturing Science and Engineering: Transaction of ASME, Vol. 127, No. 4, 2005, pp. 743–751.

[10] Padmanabhan, R., Baptista, A. J., Oliveira, M. C., Menezes, L. F., “Effect of anisotropy on the deep-drawing of mild steel and dual-phase steel tailor-welded blanks”, Journal of Material Processing Technology, Vol. 184, No. 1-3, 2007, pp. 288–293.

[11] Tang, B. T., Zhao, Z., Yu, S., Chen, J., Ruan, X. Y., “One-step FEM based control of welding line movement for tailor-welded blanks forming”, Journal of Material Processing Technology, Vol. 187–188, 12 June 2007, pp. 383–386.

[12] Wang, L. J., Wang, G. D., Liu, X. H., Wu, M. T., “Numerical Study on Welding Line Behavior of Deep Drawing TWB Process”, Journal of Iron and Steel Research International, Vol. 14, No. 5, 2007, pp. 36-38.

[13] Padmanabhan, R., Oliveira, M. C., Menezes L. F., Deep drawing of aluminium–steel tailor-welded blank, Materials and Design, Vol. 29, No. 1, 2008, pp. 154–160.

 

 

 

[14] Padmanabhan, R., Oliveira, M. C., Laurent, H., Alves, J. L., Menezes, L. F., “Study on springback in deep drawn tailor welded blanks”, International Journal of Material Forming, Vol. 2, Aug. 2009, pp. 829-832.

[15] Abbasi, M., Bagheri, B., Ketabchi, M., Haghshenas, D. F., “Application of response surface methodology to drive GTN model parameters and determine the FLD of tailor welded blank”, Computational Materials Science, Vol. 53, No. 1,  2012, pp. 368-376.

[16] Abbasi, M., Ketabchi, M., Labudde, T., Prahl, U., Bleck, W., “New attempt to wrinkling behavior analysis of tailor welded blanks during the deep drawing process”, Materials and Design, Vol. 40, Sep. 2012, pp. 407-414.

[17] Rojek, J., Hyrcza-Michalska, M., Bokota, A., Piekarska, W., “Determination of mechanical properties of the weld zone in tailor-welded blanks”, Archives of Civil and Mechanical Engineering, Vol. 12, No. 2, 2012, pp. 156-162.

[18] Fazli, A., “Optimum tailor-welded blank design using deformation path length of boundary nodes”, International Journal of Automotive Engineering, Vol. 3, No. 2, 2013, pp. 435-445.

[19] Mohebbi, M. S., Akbarzadeh, A., “Prediction of formability of tailor welded blanks by modification of MK model”, International Journal of Mechanical Sciences, Vol. 61, No. 1, 2012, pp. 44-51.

[20] Safdarian Korouyeh, R., Moslemi Naeini, H., Torkamany, M. J., Liaghat, G. H., “Experimental and theoretical investigation of thickness ratio effect on the formability of tailor welded blank”, Optics & Laser Technology, Vol.51, Oct. 2013, pp. 24-31.

 [21] Masumi, H., Masoumi, A., Hashemi, R., Mahdavinejad, R., “A Novel Approach to the Determination of Forming Limit Diagrams for Tailor-Welded Blanks”, Journal of Materials Engineering and Performance, Vol. 22, No. 11, 2013, pp. 3210-3221.

[22] Swift, H. W., “Plastic instability under plane stress”, Journal of the Mechanics and Physics of Solids, Vol. 1, No. 1, 1952, pp. 1-18.