A Novel Technique for Keyhole-Less Reinforced Friction Stir Spot Welding of Polyethylene Sheets
Subject Areas : welding
Moosa Sajed
1
,
S. M. Hossein Seyedkashi
2
1 - Department of Mechanical Engineering, University of Birjand, Birjand, Iran
2 - Department of Mechanical Engineering,
University of Birjand, Iran
Keywords:
Abstract :
[1] Sattari, S., Bisadi, H., and Sajed, M., Mechanical Properties and Temperature Distributions of Thin Friction Stir Welded Sheets of AA5083, International Journal of Mechanics and Applications, Vol. 2, No. 1, 2012, pp. 1-6, DOI. 10.5923/j.mechanics.20120201.01.
[2] Reimann, M., Gartner, T., Suhuddin, U., Göbel, J., and dos Santos, J. F., Keyhole Closure Using Friction Spot Welding in Aluminum Alloy 6061–T6, Journal of Materials Processing Technology, Vol. 237, 2016, pp. 12-18, DOI. 10.1016/j.jmatprotec.2016.05.013.
[3] Dong, H., Chen, S., Song, Y., Guo, X., Zhang, X., and Sun, Z., Refilled Friction Stir Spot Welding of Aluminum Alloy to Galvanized Steel Sheets, Materials & Design, Vol. 94, 2016, pp. 457-466, DOI. 10.1016/j.matdes.2016.01.066.
[4] Uematsu, Y., Tokaji, K., Tozaki, Y., Kurita, T., and Murata, S., Effect of Re-Filling Probe Hole on Tensile Failure and Fatigue Behaviour of Friction Stir Spot Welded Joints in Al–Mg–Si Alloy, International Journal of Fatigue, Vol. 30, No. 10, 2008, pp. 1956-1966, DOI. 10.1016/j.ijfatigue.2008.01.006.
[5] Dourandish, S., Mousavizade, S. M., Ezatpour, H. R., and Ebrahimi, G. R., Microstructure, Mechanical Properties and Failure Behaviour of Protrusion Friction Stir Spot Welded 2024 Aluminium Alloy Sheets, Science and Technology of Welding and Joining, Vol. 23, No. 4, 2017, pp. 1-13, DOI. 10.1080/13621718.2017.1386759.
[6] Sajed, M., Parametric Study of Two-Stage Refilled Friction Stir Spot Welding, Journal of Manufacturing Processes, Vol. 24, No. 1, 2016, pp. 307-317, DOI. 10.1016/j.jmapro.2016.09.011.
[7] Jeon, C. S., Jeong, Y. H., Hong, S. T., Tariqul Hasan, M., Tien, H. N., Hur, S. H., and Kwon, Y. J., Mechanical Properties of Graphite/Aluminum Metal Matrix Composite Joints by Friction Stir Spot Welding, Journal of Mechanical Science and Technology, Vol. 28, No. 2, 2014, pp. 499-504, DOI. 10.1007/s12206-013-1153-0.
[8] Hong, S. T., Das, H., Oh, H. S., Nur-E-Alam-AlNasim, M., and Chun, D. M., Combination of Nano-Particle Deposition System and Friction Stir Spot Welding for Fabrication of Carbon/Aluminum Metal Matrix Composite Joints of Dissimilar Aluminum Alloys, CIRP Annals - Manufacturing Technology, Vol. 66, No. 1, 2017, pp. 261-264, DOI. 10.1016/j.cirp.2017.04.115.
[9] Bilici, M. K., Yukler, A. I., Effects of Welding Parameters on Friction Stir Spot Welding of High Density Polyethylene Sheets, Materials & Design, Vol. 33, 2012, pp. 545-550, DOI. 10.1016/j.matdes.2011.04.062.
[10] Bozkurt, Y., The Optimization of Friction Stir Welding Process Parameters to Achieve Maximum Tensile Strength in Polyethylene Sheets, Materials & Design, Vol. 35, 2012, pp. 440-445, DOI. 10.1016/j.matdes.2011.09.008.
[11] Bilici, M. K., Yükler, A. İ., and Kurtulmuş, M., The Optimization of Welding Parameters for Friction Stir Spot Welding of High Density Polyethylene Sheets, Materials & Design, Vol. 32, No. 7, 2011, pp. 4074-4079, DOI. 10.1016/j.matdes.2011.03.014.
[12] Bozkurt, Y., Bilici, M. K., Application of Taguchi Approach to Optimize of FSSW Parameters on Joint Properties of Dissimilar AA2024-T3 and AA5754-H22 Aluminum Alloys, Materials & Design, Vol. 51, 2013, pp. 513-521, DOI. 10.1016/j.matdes.2013.04.074.
[13] Bilici, M. K., Application of Taguchi Approach to Optimize Friction Stir Spot Welding Parameters of Polypropylene, Materials & Design, Vol. 35, 2012, pp. 113-119, DOI. 10.1016/j.matdes.2011.08.033.
[14] Rezaee Hajideh, M., Farahani, M., Alavi, S. A. D., and Molla Ramezani, N., Investigation on the effects of Tool Geometry on the Microstructure and the Mechanical Properties of Dissimilar Friction Stir Welded Polyethylene and Polypropylene Sheets, Journal of Manufacturing Processes, Vol. 26, 2017, pp. 269-279, DOI. 10.1016/j.jmapro.2017.02.018.
[15] Aghajani Derazkola, H., Simchi, A., Experimental and Thermomechanical Analysis of Friction Stir Welding of Poly (Methyl Methacrylate) Sheets, Journal of Manufacturing Processes, Vol. 34, 2018, pp. 412-423, DOI. 10.1016/j.jmapro.2018.06.015.
[16] Khodabakhshi, F., Haghshenas, M., and Chen, J., Bonding Mechanism and Interface Characterisation During Dissimilar Friction Stir Welding of an Aluminium/Polymer Bi-Material Joint, Science and Technology of Welding and Joining, Vol. 22, No. 3, 2017, pp. 182-190, DOI. 10.1080/13621718.2016.1211583.
[17] Singh, R., Kumar, V., Feo, L., and Feraternali, F., Experimental Investigations for Mechanical and Metallurgical Properties of Friction Stir Welded Recycled Dissimilar Polymer Materials with Metal Powder Reinforcement, Composites Part B: Engineering. Vol. 103, 2016, pp. 90-97, DOI. 10.1016/j.compositesb.2016.08.005.
[18] Gao, J., Li, C., Shilpakar, U., and Shen, Y., Improvements of Mechanical Properties in Dissimilar Joints of HDPE and ABS via Carbon Nanotubes During Friction Stir Welding Process, Materials & Design, Vol. 86, 2015, pp. 289-296, DOI. 10.1016/j.matdes.2015.07.095.
[19] Sajed, M., Bisadi, H., Experimental Failure Study of Friction Stir Spot Welded Similar and Dissimilar Aluminum Alloys, Welding in the World, Vol. 60, No. 1, 2016, pp. 33-40, DOI. 10.1007/s40194-015-0268-6.
