Investigating the Effects of Heat Treatment in the Microstructure and Metallurgical Properties of the Explosive Welding of 304 Stainless Steel and CK45 Carbon Steel

Subject Areas : journal of New Materials

M. Allah Dadi ¹ , M.R. Khanzadeh ²

1 - کارشناس ارشد مهندسی مواد جوشکاری، واحد شهرضا، دانشگاه آزاد اسلامی، شهرضا، ایران
2 - استادیار، مرکز تحقیقات مهندسی پیشرفته، واحد شهر مجلسی، دانشگاه آزاد اسلامی، اصفهان، ایران

Received: 2017-02-11 Accepted : 2017-02-11 Published : 2017-01-20

Keywords: Heat Treatment, Explosive welding, Intermetallic, Standoff, Vortex zone,

Abstract :

In this research,the effects of heat treatment on microstructure and mechanical properties of explosively bonded 304 stainless steel-Ck45 Carbon steel with constant explosive ratio and different standoff were investigated. Samples were heat treated in 250⁰C  and 350⁰C  for 2 and 4 hours in the furnace, and optical microscopy, electron microscopy, micro hardness test and tensile shear test were carried out on samples. Diffusion of iron, chromium, manganese elements and chemical composition of local melted zone were investigated by EDS analysis. The results showed that by increasing standoff from 4 to 5 mm, impact kinetic energy was increased and interface was deformed under severe plastic deformation. Metallography study showed that wavy-vortex interface was created by increasing the standoff. Heat treatment at 350⁰C  for 2 h, increased the thickness of interface intermettallics compounds. Hardness in samples with 4- 5mm standoff was decreased by heat treating 350⁰C , 2 hr from 270.11 to 171.00 Hv and 279.00 to 195.00 Hv respectively. Strength of samples also decreased from 449.21 MPa to 370.81 MPa and 510.57 to 433.83 MPa respectively. The hardness and strength changes are due to a changes in intermetallics thickness and grain growth phenomenon. 

References:

1- B. S. Zlobin,  " Explosion Welding of Steel with Aluminum", Materials and Design, Vol. 24, No. 3, pp. 617–622, 2003.

2- ح. بختیاری، م. خانزاده قره شیران، "تاثیر عملیات حرارتی بر ترکیبات بین فلزی فصل مشترک جوش انفجاری فولاد زنگ نزن 321 به آلومینیم1230"، مجله مواد نوین مرودشت، جلدپنجم، شماره چهارم، 1394.

 

3- Tricarico L, Spina R, Sorgente D, Brandizzi M., "Effect of heat treatments on mechanical properties of Fe/AL explosionwelded",  structural transition joints. Materials and Design, Vol. 30, pp. 693-700, 2009.

4- B. S. Zlobin,  " Explosion Welding of Steel with Aluminum", Combustion, Explosion, and Shock Waves, Vol. 38, No. 3, pp. 374-377, 2002.                                                                                                        

5- F. Findik, R. Yilmaz and T. Somyurek, "The effects of heat treatment on the microstructure and microhardness of explosive welding", Scientific Research and Essays, 8 September, Vol. 6(19), pp. 4141-4151, 2011.        

6-  M.Acarer, B.Gulenc, F. Findik,   " Investigation of explosive welding parameters and their effects on microhardness and shear strength", Materials and Design, Vol. 24, pp. 659-664, 2003.         
 

7- R. Kacar, M.Acarer, "An investigation on the explosive cladding of 316L

stainless steel-din-P355GH steel", Materials processing Technology, Vol. 153, pp. 91-96, 2009.   

8-  S.A.A.Akbari Mousavi, P.farhadi sartangi, " Effect of Post-weld heat treatment on the interface microstructure of explosively welded titanium-stainless steel composite",                                                     

9-  J. Banker, " Aluminum-Steel Electric Transition Joints, Effects of Temperature and Time upon Mechanical Properties", Draft of Paper for presentation TMS 131st Annual Meeting, 2002.                    

10-M.Honarprisheh, M.Asemabadi and M.Sedighi "Investigation of annealing treatment on the interfacial properties of explosive-welded Al/Cu/Al multilayer". Materials and Design2012;Vol.37,pp.122–7.

11- DIN Standard Number No1۶2, "Determination of shear strength between cladding metal and parent metal in shear test",1975.

12-J. Lokaj and M.Benak, " X ray microanalysis of Al-austenitic steel boundary formed by explosion welding", metal, Vol. 5, PP. 18-20, 2010.

13- M. Acarer, B. Gulenc and F. Findik, "Study of some welding parameters of explosively joined steel parts, Proceedings of the 8th Denizli materials symposium, Denizli, Turkey; 2000. 2000, Vol.244, pp: 154-164.

14- ع دشتی ، ا. حلوایی، "بررسی اثر عملیات حرارتی بر استحکام اتصال آلومینیوم به فولاد در جوش انفجاری"، هفتمین سمینار ملی مهندسی سطح و عملیات حرارتی، دانشگاه صنعتی اصفهان، 1385.