List of Articles Mechanical properties

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - High-pressure and temperature-induced structural, elastic, and thermodynamical properties of strontium chalcogenides
  Dinesh Varshney S. Jain S. Shriya R. Khenata
  10.1007/s40094-016-0214-z
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Elastic and thermodynamical properties of cubic (3C) silicon carbide under high pressure and high temperature
  Dinesh Varshney S. Shriya M. Varshney N. Singh R. Khenata
  10.1007/s40094-015-0183-7
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - First principle investigations on structural, mechanical, spin polarized electronic and magnetic properties of TmZn and TmCd
  Satish Chand R. P. Singh A. Govindan
  10.1007/s40094-015-0186-4
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Active edible films and coatings with enhanced properties using nanoemulsion and nanocrystals
  Fatemeh Kalateh Seifari Hamed Ahari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Investigation on press time, resin content and soya stalk content on particleboard properties
  Meysam Mehdinia Mohamad Layegh Asghar TatarI Ali Akbar Enayati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Investigation on effect of lignocellulosic wastes (rice straw and husk) using wood-cement composite
  Meysam Mehdinia Mina Janahmadi Arash Farajpoor Asghar Tabei Saeed Kamrani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Investigation of the effect of adding melamine resin impregnated paper waste on physical and mechanical properties of medium-density fiberboard (MDF)
  Fatemeh Ramezanian Sani Ali-Akbar Enayati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Study of usability of pruned branches of Lagerstroemia spp in particleboard manufacturing
  Meysam Mehdinia Mehrdad Ahmadi Edris Moazeni
  10.30495/jrnr.2022.65277.10232
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Determination of Mechanical Properties of Pistachio nut and its kernel (Ahmad Aghaei variety)
  Mohammad Gholami Parashkouhi Behnam Gooshki Mashaallah Kermani Shahram Mohseni Mehrdad Salimi Beni
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Determination and Investigation of Some Physical and Mechanical Properties of Almond (Rabi Variety)
  M. Salimi M. Gholami Sh. Mohseni E. Abdolalizade
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - The Effect of Titanium Dioxide on the Antibacterial and Mechanical Properties of Polystyrene Nanocomposites
  Mohammad Yousefi Ali Akbar Azemati
  10.30495/jest.2018.24545.3363
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Fabrication and Characterization of Porous beta-Tricalcium Phosphate Scaffold for Bone Regeneration
  M. Khodaei A. Valanezhad I. Watanabe
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Investigation and Comparison of Microstructure and Mechanical Properties Between Parts of Shear Spinning and Rolled
  H Ghayour S. M. J Hoseini A Salemi Golezani M. K Asgarani I Ebrahimzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Effects of Welding Cycles on Microstructural Characteristics and Mechanical Properties of SAF 2507 Super Duplex Stainless Steel
  M. A. Beheshty E. H. Dehkordi K. Zarrin Naghsh M. R. B. Marnany
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Effect of the FSW Tool Pin Profile on Mechanical Properties of the Al6061-Cu Plates Joint
  F. khalili K. Amini M. Golzar Shahri F. Gharavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Effect of Surface Treatment and Heat Treatment on the Microstructure and Mechanical Properties of Ti6Al4V Alloy Manufactured by Selective Laser Melting
  Q Salim Shaher M Razazi Boroujeni S Nosohiyan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Evaluation of Performance of Resistance Spot Welded Joints with Different Parameters in Advanced High Strength TRIP Steel
  I. Hajiannia R. Ashiri M. R. Pakmanesh M. Shamanian M. Atapour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Improvement of Microstructure and Mechanical Properties of Manganese Steels by Adding Boron Alloying Element
  N. Arab
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - The Influence of the Nickel Content on Microstructure and Mechanical Properties of the Al-Mg Weld Metal
  F. Sharifi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - A Brief Study of Magnesium-Zinc Alloy Scaffolds Performance
  Z. S Seyedraoufi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Metallurgical Investigation of Under Water Friction Stir Welding (UWFSW) Process
  M Sadeghi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Effect of Processing Parameters on Properties of Friction Stir Welded Joints of Aluminium Alloys AA7075- T651 and AA6061-T6
  H. S. Patil Neelsai Sharma Kairav Patel Abhishek Patel Viral Patel Chetan Patil
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Fabrication of AA1060/Al2O3 Composites by Warm Accumulative Roll Bonding Process and Investigation of its Mechanical Properties and Microstructural Evolution
  M. Heydari Vini P. Farhadipour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Mechanical Properties and Microstructural Evolution of AA5083/Al2O3 Composites Fabricated by Warm Accumulative Roll Bonding
  Mohammad Heydari Vini M. Sedighi Mehdi Mondali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - The Numerical Modeling to Study the Multi-Pass Friction Stir Processing on Magnesium Casting Alloy AZ91
  hoda agha amini fashami Mohammad Hoseinpour Gollo Nasrollah Bani Mostafa Arab Bahram Nami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - Influence of Tool Offset Distance on Microstructure and Mechanical Properties of the Dissimilar AA2024–AA7075 Plates Joined by Friction Stir Welding
  Hossain Soleimany kamran amini Farhad Gharavi
  10.30495/admt.2021.1897512.1193
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Experimental Correlation Between Microstructure, Residual Stresses and Mechanical Properties of Friction Stir Welded 2024-T6 Aluminum Alloys
  Majid Farhang Mohammadreza Farahani Mohammad Nazari O. Sam Daliri
  10.30486/admt.2022.1943845.1322
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Nonlinear Mechanical Properties of Random Networks Composed of Nonlinear Fibers
  Reyhaneh Mirkhani Ali Asghar Alamdar Saeed Ebrahimi
  10.30486/ADMT.2024.873639
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Influence of Al2O3 Additive on Mechanical Properties of Wollastonite Glass-Ceramics
  Monavvar Rahimi Babak Sadeghi Maryam Kargar Razi
  10.30495/admt.2021.1913578.1226
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Effect of Post-Weld Heat Treatment on Microstructure and Mechanical Properties of AA7075 Welds
  Alireza Jalil Nasrollah Bani Mostafa Arab Malek Naderi Yaghoub Dadgar Asl
  10.30486/ADMT.2023.873791
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - Vibration of Timoshenko Beam-Soil Foundation Interaction by Using the Spectral Element Method
  S Hamioud S Khalfallah S Boudaa
  10.22034/jsm.2020.1879476.1503
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - A Study on Stiffness of a Defective Rippled Graphene Using Molecular Dynamics Simulation
  Amin  Hamzei Emad  Jomehzadeh M Rezaeizadeh M Mahmoodi
  https://doi.org/10.60664/jsm.2023.2031734
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Thermal and Mechanical Properties of Hybrid Composite Strengthened by Carbon Fibers/Aramid Fibers
  F Basati M.H Yas
  https://doi.org/10.60664/jsm.2023.3011762
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - Stress Relief and Material Properties Improvement Through Vibration VS. Common Thermal Method
  S Jafari Mehrabadi M Azizmoradi M.M Emami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Dynamic Simulation and Mechanical Properties of Microtubules
  M Motamedi M Mosavi Mashhadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Mechanical Characteristics and Failure Mechanism of Nano-Single Crystal Aluminum Based on Molecular Dynamics Simulations: Strain Rate and Temperature Effects
  R Rezaei H Tavakoli-Anbaran M Shariati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - Assessment of mechanical properties of silkworm cocoons under quasi-static loading
  H. Ahmadi M. Hasheminiya
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Investigation the effect of diameter and temperature on mechanical properties of single-walled boron nitride nanotubes by molecular dynamics simulation
  Mohammad reza Mostafaei Abdolhosein Fereidoon Masoud Darvish ganji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - Atomistic simulations on the influence of diameter, number of walls, interlayer distance and temperature on the mechanical properties of MWBNNTs
  mohammad reza mostafaei Abdolhosein Fereidoon Masoud Darvish ganji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Molecular dynamic simulation for investigation of temperature, neck length and sheet size influence on mechanical properties of graphene nanobud
  marjan khorasani Abdolhosein Fereidon
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - THE EXPERIMENTAL INVESTIGATION OF ENERGY ABSORBED AND MORPHOLOGICAL PROPERTIES OF ABS.
  احسان صائمی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - Investigation of Mechanical Vibration Parameters on AL-A380 using Taguchi Method for the Construction of vehicle’s Shell pinion and gearbox
  Ehsan Safarpour Amin Kolahdooz
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - Development of Fiber Reinforced SCM for Sustainable Construction
  Iman Mehdipour Nicolas Ali Libre Mohammad Shekarchia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - An Experimental Study on Effect of Waste Tire Rubber on the Fresh and Hardened Behavior of Self-compacting Concrete
  Mohammad saleh Moghaddam Saman RahatDahmardeh mohammad hassan Moghaddam
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - The Influence of Pet Fibers on the Properties of Fresh and Hardened Concrete
  N Shamskia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Investigating the Effect of natural Pozzolans on Mechanical Properties of Roller Compacted Concrete
  Mohammad Falahnejad Mahdi Mahdikhani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - FSP pass number and cooling effects on the microstructure and properties of AZ31
  Akbar Heidarpour Saeed Ahmadifard Nadia Rohania
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - The Effect of sintering temperature on microstructure and hardness of milled WC- 20 wt.% equiatomic (Fe,Co) cemented carbides
  Minoo Karbasi Maryam Karbasi Ali Saidi Mohammad Hossein Fathi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  49 - Investigation of mechanical properties and fracture surfaces of 5086 Al-based alloy processed by equal channel angular pressing in different routes
  Seyed Elias Mousavi Mohammad Hossein Khaleghifar Farshid Ahmadi Mahmood Meratian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  50 - A new approach for fabrication of bulk MMCs using Accumulative Channel-die Compression Bonding (ACCB)
  Alireza Babaei Hosein Jafarzadeh V. Zakeri Mehrabad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  51 - The Effects of Mould Materials on Microstructure and Mechanical Properties of Cast A356 Alloy
  Musa Yıldırım Dursun ÖZYÜREK
• Open Access Article
  • Abstract Page
  • Full-Text
  
  52 - Effect of Thermomechanical Processing on the Microstructure and Mechanical Properties of a Duplex Stainless Steel
  Maryam Mohammad Jafarpour Bitollah Eghbali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  53 - Poly (lactic-co-glycolic)/nanostructured merwinite porous composites for bone tissue engineering: II. structural and in vitro characterization
  Ali Nadernezhad Bahman Torabinejad Masoud Hafezi Mohamadreza Baghban-Eslaminejad Fatemeh Bagheri Farhood Najafi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  54 - Reinforcement of Glass Ionomer Cement: Incorporating with Silk Fiber
  Mina Bahrami-Abadi Masoumeh Khaghani Ahmad Monshi Ali Doostmohammadi Sara Alizadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  55 - Effects of Friction Stir Process Parameters on Microstructure and Mechanical properties of Aluminum Powder Metallurgy Parts
  Mohsen Abbasi-Baharanchi Fathallah Karimzadeh Mohammad Hossein Enayati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  56 - Synthesis of nano-structured sphene and mechanical properties optimization of its scaffold via response surface methodology
  Amirmostafa Amirjani Masoud Hafezi Ali Zamanian Mana Yasaee Noor Azuan Abu Osman
• Open Access Article
  • Abstract Page
  • Full-Text
  
  57 - Effect of Twist Extrusion Process on the Mechanical Properties and Microstructure Evolution of 70-30 Brass Alloy
  Sara Hosseini Faregh Amir Hasani Majid Naseri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  58 - Effect of Zn and porosity on the biodegradability and Mechanical Properties of Mg-Zn Scaffolds
  zahra sadat seyedraoufi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  59 - Study the effect of the friction stir process on the microstructure and mechanical behavior of the AZ31 as-cast alloy joint
  Amir Rezaee Iman Ebrahimzadeh Farhad Gharavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  60 - Utilization of Microalloying with Rare Earth Elements and Hot Extrusion for Remarkable Grain Refinement and Enhancement of Mechanical Properties of as-Cast Magnesium Alloy
  Hooman Abedi Massoud Emamy Hamed Mirzadeh Jafar Rassizadehghani M. Ra'ayatpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  61 - The Improvement of Mechanical Properties of the Incoloy 825 Weld Metal by Applying Electromagnetic Vibration
  Ali Pourjafar Reza Dehmolaei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  62 - Effect of Nano-MgO Additive on Compressive Strength of Concrete Fabricated by Different Processing Methods
  Eisa Mahmoudsaleh Ali Heidari Farshid Fathi Seyed Ali HassanzadehTabrizi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  63 - Using of Thermoplastic Polyurethane Granule (TPU) as a Reinforcing Phase and Self-Healing Agent in a Polymer Composite Resin Epoxy to Exhibit Mechanical Properties Recovery
  Mostafa Hosseini Aazam Ghassemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  64 - Microstructural Evolutions and Mechanical Properties of Transient Liquid Phase Bonded WC-Co/St52 with BNi-2 Interlayer
  Hamed  Zeidabadinejad Mahdi Rafiei Iman  Ebrahimzadeh Mahdi  Omidi Farid  Naeimi
  10.71670/jmatpro.2024.981656
• Open Access Article
  • Abstract Page
  • Full-Text
  
  65 - Bimetal friction stir welding of aluminum to magnesium
  P Pourahmad M Abbasi H.A Mehrabi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  66 - Structural and mechanical properties of AFe2O4 (A = Zn, Cu0.5Zn0.5, Ni0.3Cu0.2Zn0.5) nanoparticles prepared by citrate method at low temperature
  Ahmad Gholizadeh
  10.22034/jna.2018.556139.1059
• Open Access Article
  • Abstract Page
  • Full-Text
  
  67 - Effect of nanoparticles on the improving mechanical behavior of GFRP composites in a corrosive environment
  Yasaman Gitiara Reza Barbaz-Isfahani Saeed Saber-Samandari Mojtaba Sadighi
  10.22034/jna.2021.1930895.1256
• Open Access Article
  • Abstract Page
  • Full-Text
  
  68 - Structural and mechanical properties of AFe2O4 (A = Zn, Cu0.5Zn0.5, Ni0.3Cu0.2Zn0.5) nanoparticles prepared by citrate method at low temperature
  Ahmad Gholizadeh
  10.22034/jna.2018.541845
• Open Access Article
  • Abstract Page
  • Full-Text
  
  69 - Ab-initio Investigation of Mechanical Properties of MX2(M=Zr, Hf; X=S, Se, Te) Transition Metal Dichalcogenides Nano Tubes (TMDNTs)
  Abdollah Haji Malekkheili Mojtaba Yaghoubi Alireza Amani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  70 - The Mechanical Properties of PA6/NBR/clay/CaCO3 Hybrid Nanocomposites
  Abouzar Haghshenas Hamzeh Shahrajabian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  71 - Evaluation of Optimal Conditions, Microstructure, and Mechanical Properties of Aluminum to Copper Joints Welded by FSW
  Ahmad Afsari Shahin Heidari Jaleel Jafari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  72 - Study of Mechanical Properties of 7075 Aluminum Alloy Due to Particle Size Reduction due to Constrained Groove Pressing CGP Process
  Shahin Heidari Ahmad Afsari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  73 - Effects of Colliding Particle Size and Velocity on Mechanical Properties of AZ31 after Surface Mechanical Attrition Treatment: Molecular Dynamics Simulation
  Ali Kazemi Ali Heidari Kamran Amini Farshid Aghadavoudi Mohsen Loh-Mousavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  74 - Enhanced Microstructure and Mechanical Properties of A216 Steel by Friction Stir Processing
  Gholamreza Khalaj Gholamreza Ghaffari Bahram Abdolmaleki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  75 - Optimization of Fused Deposition Modeling Process Parameters to Achieve Maximum Mechanical Properties Using Response Surface Methodology
  Ali Hasanabadi Hossein Afshari Seyyed Mohammad Bagher Mirafzali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  76 - Effects of Tool Tilt Angle and Plunge Depth on Properties of Polycarbonate FSW Joint
  Hamidreza Mohammadi Kuhbanani Hesameddin Yasemi Hamed Aghajani Derazkola
• Open Access Article
  • Abstract Page
  • Full-Text
  
  77 - Investigating the Effects of Using Microsilica and Nanosilica on the Hardened Mechanical Properties and Durability of SCC Containing Recycled Aggregates
  Reza Farokhzad mohsen mehrpoya
• Open Access Article
  • Abstract Page
  • Full-Text
  
  78 - Experimental study of modulus of elasticity of Alkali-activated concrete based on XRF and SEM tests
  Mohammadhossein Mansourghanaei Morteza Biklaryan Alireza Mardookhpour
  10.30495/civil.2023.698647
• Open Access Article
  • Abstract Page
  • Full-Text
  
  79 - Reviewing Optimal Percent of Steel Fibers and their Effects on Lightweight Concrete Durability
  Ali Ghods sanaz chahkandi Homayon navayi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  80 - Laboratory Study of Mechanical Properties and Durability of Concrete Containing Silica fume and Barchip Fibers
  seyed ahmad eshta ali salighehzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  81 - Evaluation of Rheological and Mechanical Properties of Lightweight Concrete Containing Different Percentages of Polypropylene and Zeolite Fibers
  Abdolkarim Abbasi Dezfouli Rezbeh Aghajary
  10.30495/civil.2021.686627
• Open Access Article
  • Abstract Page
  • Full-Text
  
  82 - Determination of the Properties of Self-compacting Concrete Containing Metakaolin as a Replacement for Cement and Limestone Powder
  Seyed Fathollah Sajedi Milad Orak
  10.30495/civil.2022.689514
• Open Access Article
  • Abstract Page
  • Full-Text
  
  83 - An experimental study on effects of glass fiber and Metakaolin on the rheological, mechanical, and durability properties of self compacting concrete
  Mir Pouya Naseri Alavi Payam Shafiei Hassan Javanshir
• Open Access Article
  • Abstract Page
  • Full-Text
  
  84 - Investigation of rheological and mechanical properties of two-component and three-component mortars containing microsilica and slag
  Seyed Fathollah Sajedi wilbert karamian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  85 - Experimental Study of Compressive Strength of Geopolymer Concrete Based on XRF and SEM Analysis
  Mohammadhossein Mansourghanaei Morteza Biklaryan Alireza Mardookhpour
  10.30495/civil.2022.689960
• Open Access Article
  • Abstract Page
  • Full-Text
  
  86 - Investigating some effects of using Metakaolin as pozolan in concrete
  Gholamreza saghir shams abadi Abdolkarim Abbasi dezfoli
• Open Access Article
  • Abstract Page
  • Full-Text
  
  87 - Comparison of the effect of silica fume and fly ash on the mechanical properties of masonry recycled concretes
  Mostafa Azhdarizadeh Seyyed Fathollah Sajedi Mohammad Sirous Pakbaz
  10.30495/civil.2023.701859
• Open Access Article
  • Abstract Page
  • Full-Text
  
  88 - Experimental and numerical evaluation of rheological and mechanical properties of self-compacting concretes containing steel fibers and PET using response surface method (RSM)
  hamed basser Taleb Moradi Shaghaghi hasan afshin saleh ahari saeed mirrezaei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  89 - Effect of Natural Pozzolan on Concrete’s Mechanical Properties and Permeability in Various Grades of Cement
  Farhad Pirmohammadi Alishah Mehdi Mohammad Razaei
  10.30495/geotech.2020.680492
• Open Access Article
  • Abstract Page
  • Full-Text
  
  90 - Investigation of the Pumice Additive Effect in Azarshahr Region on Mechanical Properties and Self-compacting Concrete Performance
  Farhad Pirmohammadi Alishah Ayub Khandaghi Mehdi Mohammadrezaei Sattar Shafiei
  10.30495/geotech.2022.692951
• Open Access Article
  • Abstract Page
  • Full-Text
  
  91 - Investigation of correlation between rheological and physico-mechanical properties of rubber compound based on NR with NR’s Lipid content by ATR-FTIR spectroscopy
  Zohreh Asghari-Barzegar Saeed Taghvaei-Ganjali Mercedeh Malekzadeh Fereshteh Motiee
  10.30495/jacr.2021.686374
• Open Access Article
  • Abstract Page
  • Full-Text
  
  92 - تأثیر فرآیندهای HPT و CGP بر خصوصیات معمولی مس
  ش. جعفرزاده H. Bisad ه. میانجی ع. زینعلی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  93 - The Effects of SiO2 Nanoparticles on Mechanical and Physicochemical Properties of Potato Starch Films
  Z. Torabi A. MohammadiNafchi
  10.22034/jchr.2018.544018
• Open Access Article
  • Abstract Page
  • Full-Text
  
  94 - The Effects of Ribose on Mechanical and Physicochemical Properties of Cold Water Fish Gelatin Films
  Neda Javadian Habibollah Mirzai Abdorreza Mohammadi Nafchi
  10.22034/jchr.2018.544065
• Open Access Article
  • Abstract Page
  • Full-Text
  
  95 - Antimicrobial, Physicochemical, Mechanical, and Barrier Properties of Tapioca Starch Films Incorporated with Eucalyptus Extract
  M. Rojhan L. Nouri
  10.22034/jchr.2018.544037
• Open Access Article
  • Abstract Page
  • Full-Text
  
  96 - Active Packaging Film Based on Lysozyme/Polyvinyl Alcohol / Alyssum Homalocarpum Seeds Gum
  Anna Abdolshahi Leila Monjazeb Marvdashti Bahare Salehi Filippo Maggi Javad Sharifi-Rad
  10.22034/jchr.2020.1890915.1091
• Open Access Article
  • Abstract Page
  • Full-Text
  
  97 - Edible Film Based on Lallemantia peltata L. Seed Gum: Development and Characterization
  Anna Abdolshahi Mojtaba Heydari Majd Mehdi Abdollahi Saeideh Fatemizadeh Leila Monjazeb Marvdashti
  10.22034/jchr.2020.1896596.1118
• Open Access Article
  • Abstract Page
  • Full-Text
  
  98 - Biodegradable Composite Film Based on Tapioca Starch/Bovine Gelatin with Roselle Calyx Extract and Zinc Oxide Nanorod
  Tahereh Sadeghi Aidin Doroudi Neda Sadat Aghayan Elinasadat Jodeiri Golabi Chris Allen
  10.22034/jchr.2023.1992770.1790
• Open Access Article
  • Abstract Page
  • Full-Text
  
  99 - Effect of Reinforcer Percentage and Its Distribution on Mechanical Behavior of Alumina Reinforced Epoxy Composite
  محمدحسین بینا کوروش شیروانی حمید رضا سلیمی جزی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  100 - Investigation of the Tempering Treatment on the Mechanical Propertiesof 13%Cr Super Martensitic Stainless Steel
  Saeeid Jbarzare Iman Kheirollahi-Hoseinabadi S. M Sehri Rasol Ghasemi محمد Kuwaiti ابراهیم Shokraneh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  101 - Transient liquid phase (TLP) bonding of AISI321 stainless steel using MBF-20 commercial interlayer
  محمد علی میثاقی رضا بختیاری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  102 - Evaluation of Microstructure and Mechanical Properties of Friction Stir Lap Welded 6061 Aluminium Alloy at various welding speeds
  فرهاد غروی ایمان ابراهیم زاده علی سهیلی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  103 - Investigation of Nitride Bonding Fomation on Phase analysis, Microstructure and Mechanical Properties,of MgO-C Refractories
  مهدی مهرآذین امیرعباس نوربخش سید علی حسن زاده تبریزی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  104 - The effect of homogenization on the microstructure and mechanical properties of transient liquid phase bonding between Inconel 718 and Inconel 600
  ali khorram Akbar Davoodi Jamaloei Abed عابد
• Open Access Article
  • Abstract Page
  • Full-Text
  
  105 - Effect of Tool Rotation Speed on the Mechanical Properties and Corrosion Behavior of Dissimilar Friction Stir Welded of 5083 Aluminium Alloy and Commercially Pure Titanium
  Masoud Shabani بهروز شایق بروجنی رضا ابراهیمی کهریزسنگی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  106 - ارزیابی خواص مکانیکی جوش های غیر مشابه فولاد زنگ نزن AISI 347 به فولاد کم آلیاژ ASTM A335
  iman HAJIANNIA
• Open Access Article
  • Abstract Page
  • Full-Text
  
  107 - Investigation on microstructure, mechanical properties and pressureless sintering behavior of ZrB2-SiCnano/micron composites
  زینب نصیری مهری مشهدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  108 - Investigation of Electrochemical and Mechanical Properties of Solid Oxide Fuel Cell Fabrication by 3d Printer
  keyvan mirzaei feshalami zahra sadeghiyan Ramin Ebrahimi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  109 - Investigation of Microstructural and Mechanical Properties of Tungsten Disulfide (WS2) /Aluminum Matrix Nanocmposite
  hossein salehi vaziri ali shokuhfar Seyyed Salman Seyyed Afghahi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  110 - Investigation of the welding pass numbers on structure, hardness and wear resistance of sheet welded by ESAB 85.65
  abbas saadat mohammad khalili parvar mohammad Reza khanzadeh ghareshiran
• Open Access Article
  • Abstract Page
  • Full-Text
  
  111 - Modification of Microstructure and Enhancing Mechanical Properties of as-cast AZ91 Magnesium alloy via Friction Stir Processing
  Hassan Jiryaei Sharahi Majid Pouranvari Mojtaba Movahedi
  10.30495/apme.2021.681639
• Open Access Article
  • Abstract Page
  • Full-Text
  
  112 - Effect of Rotational Speed on Microstructure and Mechanical Properties of AA5456 Alloy Welded by FSW-Lap Joint
  mohamad ali safarkhanian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  113 - Influence of Heat Treatment on Microstructure and Mechanical Properties of HVOF Sprayed Cr3C2-NiCr Coating
  Pejman Zamani Moghadam Reza Ghasemi Behnaz saeedi Hamid Dahaghin Farhad Shahriari Mahmood Memari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  114 - Correlation of Microstructure with Mechanical Behavior of HSLA-100 Weld Metal Produced By GTAW Method
  Mahyar Darivandpour Reza Dehmolaei Khalil Ranjbar
  10.30495/apme.2021.1910558.2016
• Open Access Article
  • Abstract Page
  • Full-Text
  
  115 - Optimization the Mechanical Properties of PVC/n-NBR Blends Using Taguchi Experimental Design Method
  Alireza Afshari Mohammadreza Kalaee Mehdi Moghri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  116 - Effect of Graphite on the Mechanical Properties and Tribological Behavior of Aluminum Matrix ‎Nanocomposite
  Elham Bakhshizade Ali Shokuhfar Ashkan Zolriasatein Mehdi Khodaei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  117 - Effect of Aging Time on Microstructure and Mechanical Properties of IN617 Superalloy at 900 °C
  mohsen mehdizadeh hassan farhangi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  118 - Optimization of mechanical and dielectric properties by controlling densification and microstructure in silicon nitride ceramics prepared by hot pressing method
  S. Salman S. Afghahi Amirhossein kouchaki foroshani Pouria Dehghani farhood heydari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  119 - Study of the microstructure and metallurgical properties in tungsten inert gas welded Incoloy 925 superalloy
  Ali Mortazaei Ehsan Ghajavand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  120 - The effect of addition nano boron carbide on the mechanical properties and pressurless sintering of B4C-5% vol TiB2 composites
  Nahid Ahmadi Hamaidreza Baharvandi Naser Ehsani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  121 - A review on evaluation of natural polymers with the approach of drug delivery system using herbal plant microcapsules
  Amirreza Esmaeili Romina Hemami Yashar Ghaffari Somayeh Abdollahi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  122 - The mechanical performance of silk and collagen nanoparticles for dental applications
  Mohammad Hossein Malekipour Esfahani Behnoush Selahbarzin
• Open Access Article
  • Abstract Page
  • Full-Text
  
  123 - استفاده از روش غیرمخرب فراصوتی برای پیش‌بینی خواص مکانیکی فولاد AISI 4140
  محمد حمیدنیا فرهنگ هنرور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  124 - بررسی اثر نسبت منظری نانولوله های کربنی روی خواص مکانیکی نانوکامپوزیت پلیمری
  محمد هاشمی گهروئی حسین گلستانیان مهدی سلمانی تهرانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  125 - بررسی اثر پارامترهای مواد و فرایند بر استحکام کششی قطعات قالبگیری تزریقی تولیدشده از لاستیک بازیافتی و پلی‌پروپیلن
  مهدی بزرگی طاهر ازدست عبدالمحمد رضاوند
• Open Access Article
  • Abstract Page
  • Full-Text
  
  126 - Investigating the Effect of T6 Heat Treatment on Mechanical Properties of 7075 Al Alloy
  Mohsen Emami Vahid Hasan Nasab
• Open Access Article
  • Abstract Page
  • Full-Text
  
  127 - Investigating the mechanical properties of the composite made of polypropylene and Conocarpus wood flour
  Amir Mohammadinia parizad sheikhi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  128 - An overview of Friction stir processing of magnesium alloys reinforced by ceramic additive: Microstructure and mechanical properties
  Masoud Kasiri-Asgarani
  10.71939/jsme.2024.1120195
• Open Access Article
  • Abstract Page
  • Full-Text
  
  129 - Examining some mechanical and physical properties of gold
  Hassan Ghalami Bavil Olyaee Seyed Hamed  Ghasemi Karar Nadhom Yasein
• Open Access Article
  • Abstract Page
  • Full-Text
  
  130 - Effect of Bonding Time on Microstructure and Mechanical Properties of Transient Liquid Phase Bonding Between WC-Co/St52
  Hamed Zeidabadinejad Mahdi Rafiei Iman Ebrahimzadeh Mahdi Omidi Farid Naeimi
  10.71670/jmatpro.2024.1121074
• Open Access Article
  • Abstract Page
  • Full-Text
  
  131 - Manufacturing High-Strength HA-Ti Surface Composites by Friction Stir Processing with Different Filler Mixtures
  A Shahbaz Mehrdad Abbasi H Sabet
• Open Access Article
  • Abstract Page
  • Full-Text
  
  132 - Synthesis of polymer matrix nanocomposite with carbon fibers and analysis of its strength properties
  S.M.M. Shafiei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  133 - Comparison of the Microstructure and Mechanical Behavior of the Welding Zone of Aluminum Alloy 5754 by FSW and TIG Methods
  Esmaeil  Zarei Ahmad Afsari Eshagh  Saharkhiz Seyed Kambiz  Ghaemi Osgouie
  10.71762/7mt5-v498
• Open Access Article
  • Abstract Page
  • Full-Text
  
  134 - Experimental Investigation of Leca Different Volume Lightweight Aggregate Effect on the Mechanical Properties of Lightweight Concrete
  Allahdad Ahmadi babak Mansoori
• Open Access Article
  • Abstract Page
  • Full-Text
  
  135 - Study of Mechanical and Thermal Properties of NBR/PP-Nano Clay Composite
  ایمان Farahbakhsh S.A Manafi مهدی Sahedi Asl بهزاد Nayebi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  136 - Effect of temperature and time, the interlayer on microstructure and mechanical properties of Transient Liquid Phase (TLP) bonding of AISI321 stainless steel
  M.A Misaghi رضا Bakhtiari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  137 - Characterization of mechanical and corrosion behaviour of multilayered Cu/Al/Al2O3 nano-composite produced by ARB process
  امید Hatami کامران Amini حمید Ghayour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  138 - Effect Of Quenching and Tempering Temperature on the Fracture Quality of GS-45CrNiMo4-2 Steel, Through the Quench-Temper Heat Treatment Cycle
  Hamed Eskandari Mansoor Farzam Omid Abbasi Larki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  139 - Achieving optimal conditions for manufacturing of A356 aluminum alloy/ BN(h) composite using stir casting
  مسعود Moshrefifar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  140 - Effect of nano Si3N4، Al2O3 و AlMg and cold rolling process on the microstructural and mechanical properties of AL-6061alloy
  Masoud Moshrefifar Mehran Zare
• Open Access Article
  • Abstract Page
  • Full-Text
  
  141 - Effects of severe plastic deformation on mechanical properties, electrical conductivity and microstructure of Al-7075 alloy
  علیرضا Dashti M.H Shaeri رضا Taghiabadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  142 - preparation and evaluation of mechanical and thermal properties of epoxy/silica nanocomposites
  lمحمدرضا Safavi رحیم Eqra حبیب Daneshmanesh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  143 - protrusion friction stir spot welding: the microstructure and mechanical properties of Al 6061 alloy
  omid zarei mostafa mosavizade fateme zarghani hamed zarei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  144 - Effect of Pb on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy
  Mohammad Reza Askaran Masoud Emamy Mehdi Malekan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  145 - Influence of Friction Stir Welding Parameters on Mechanical and Metallurgical Properties in Lap Joints of 5456Aluminum Alloy
  منصور مردعلی زاده محمد علی صفرخانیان محمد رضا سلیمانی یزدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  146 - Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions
  Abbas Yazdizade Khalili sadegh ghasemi banadkouki Hamid Reza Karimi Zarchi masoud mosallaee pour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  147 - Investigation of High Frequency Resistance Welding (HFRW) Variables on microstructure and mechanical properties of dissimilar joints between chromium-molybdenum low alloy steel tubes to chromium high alloy steels
  MOHAMMAD SADEGHI Hamed Sabet HOSAIEN RASAVI
• Open Access Article
  • Abstract Page
  • Full-Text
  
  148 - Mechanical and Corrosion Properties of Graphene Oxide-Copper Nano-composites produced by the accumulative Roll Bonding (ARB) method
  Laleh Ghalandari Parisa Tajbakhsh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  149 - Effect of severe plastic deformation process on mechanical properties of 1.7225 Steel
  behrouz mahdikhani Mehrdad Javadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  150 - Study on microstructure and mechanical properties of API X70 steel at various hot rolling conditions
  محسن ریحانیان Mehdi Rezaei Mostafa Eskandari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  151 - Investigation of the structure and mechanical properties of aluminum 6061-graphene nanocomposite fabricated by the friction stir processing
  Gholamreza Ghafari Mina Safa Farzad Soleymani Gholamreza Khalaj
  10.30495/jnm.2023.31565.1986
• Open Access Article
  • Abstract Page
  • Full-Text
  
  152 - Modification of mechanical properties of friction stir welded AM60 magnesium alloy with changing rotational speed and addition of nano alumina particles
  Arash Behzadinezhad Abbas mohassel Hamid Omidvar Nader Setoudeh
  10.30495/jnm.2022.28682.1932
• Open Access Article
  • Abstract Page
  • Full-Text
  
  153 - Microstructural characterization and mechanical properties of IN617 superalloy after long-term operation
  mohsen mehdizadeh Hasan Farhangi
  10.30495/jnm.2021.29188.1940
• Open Access Article
  • Abstract Page
  • Full-Text
  
  154 - Production of Aluminum metal matrix composite reinforced with Al-Cr-Fe quasicrystal nano-powder by using accumulative roll bonding process and investigation mechanical properties
  Shima Pashangeh Morteza Alizadeh Rasool Amini
  10.30495/jnm.2021.28185.1922
• Open Access Article
  • Abstract Page
  • Full-Text
  
  155 - Synthesis and characterization of copper based spinel coating on alumina substrate for spark plug aero-engine application
  Raziyeh Arabahmadi Navid Rezaie Mojtaba Ghatee
  10.30495/jnm.2022.29685.1950
• Open Access Article
  • Abstract Page
  • Full-Text
  
  156 - Spark plasma sintering of aluminum 3000 and 5000 alloys powder obtained from recycling of Used Beverage Cans (UBCs)
  Hadi Rezazadeh Maziyar Azadbeh
  10.30495/jnm.2024.33170.2036
• Open Access Article
  • Abstract Page
  • Full-Text
  
  157 - The effect of pin shape on microstructure and mechanical properties of HA-Ti surface composites produced by FSP method
  Amirhosein Shahbaz Mehrdad Abbasi Hamed Sabet
  10.30495/jnm.2024.32961.2027
• Open Access Article
  • Abstract Page
  • Full-Text
  
  158 - Effect of the shoulder size and dwell time on the static Strength and fracture mode of projection friction stir spot welded 2024 aluminum alloy
  F. zarghani seid m. mousavizade G.R Ebrahimi H.R. Ezatpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  159 - Addition of 6.2% Aluminum on the Microstructure and Mechanical Properties of Hypoeutectic Gray Iron
  H. Sazegaran A.R. Kiani Rashid
• Open Access Article
  • Abstract Page
  • Full-Text
  
  160 - Investigation of the Effect of Strain Rate on Tensile Properties of Polyurethane Using Eyring Model
  M. H. Moghim S. M. Zebarjad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  161 - Microstructure Evaluation of Acrylonitril-Butadiene Copolymer Nanocomposites Reinforced by Nano-Calcium Carbonate by Permeability Test
  زهرا Shakouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  162 - Effect of Sr on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy
  A. Afsharnaderi J. Rasizadeh M. Malekan M. Emamy
• Open Access Article
  • Abstract Page
  • Full-Text
  
  163 - Assessment of Aging Cycle for Coupering Its Aluminum Composite Foams with (A356-4% Cu) and A356 Foam Mechanical Behavior
  S.M.H Mirbagher H. Soltani H. Valie
• Open Access Article
  • Abstract Page
  • Full-Text
  
  164 - Large Eenhancement in Mechanical Properties of Al 2024 Alloy After Single Rolling Pass
  M. میرزایی M. روشن S. جوادپور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  165 - Mechanical and Physical Properties Laser and GTA Welding of Commercial Pure Titanium
  S.GH. رضوی M. سبکتکین ریزی M. طاهری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  166 - Investigating the Effects of Heat Input on Corrosion Rate of Joint of Duplex Stainless Steel 2205 Weldments by GTAW Process
  M.A ترحم نژاد R. دهملائی S. معینی فر
• Open Access Article
  • Abstract Page
  • Full-Text
  
  167 - The effect of ultrasonic vibrations on mechanical properties of low carbon steel-pure titanium bilayer sheet in incremental sheet forming process
  M.R. sakhtemanian M. honarpishe S. amini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  168 - Comparison of microstructures and mechanical properties of Al 7075 alloy obtained from conventional modified SIMA processes
  M. Karamouz M. Alizadeh A.R. Ahmadi