Synthesis of nano-structured sphene and mechanical properties optimization of its scaffold via response surface methodology

Subject Areas : Finite Element Modeling

Amirmostafa Amirjani ¹ , Masoud Hafezi ² , Ali Zamanian ³ , Mana Yasaee ⁴ , Noor Azuan Abu Osman ⁵

1 - Department of Mining and Metallurgical Engineering, Amirkabir University of Technology, Tehran, Iran
2 - Nanotechnology and Advanced Materials Division, Materials and Energy Research Center, Iran
3 - Nanotechnology and Advanced Materials Department, Materials and Energy Research Center, Alborz, Iran.
4 - Department of Life Science Engineering, Faculty of New Sciences and Technologies, University of Tehran, Tehran, Iran.
5 - Department of Biomedical Engineering, Faculty of Engineering, University of Malaya, Kuala Lumpur, Malaysia.

Received: 2016-02-04 Accepted : 2016-07-15 Published : 2016-06-01

Keywords:

References:

[1] J. Pantić, A. Kremenović, A. Došen, M. Prekajski, N. Stanković, Z. Baščarević, B. Matović, "Influence of mechanical activation on sphene based ceramic material synthesis", Ceram. Int., Vol. 39, No. 1, 2013, pp. 483-488.

[2] D. Clarke, "Ceramic materials for the immobilization of nuclear waste", Annu. Rev. Mater. Sci., Vol. 13, No. 1, 1983, pp. 191-218.

[3] Y. Teng, L. Wu, X. Ren, Y. Li, S. Wang, "Synthesis and chemical durability of U-doped sphene ceramics", J. Nucl. Mater., Vol. 444, No. 1, 2014, pp. 270-273.

[4] T. S. Lyubenova, F. Matteucci, A. Costa, M. Dondi, J. Carda, "Ceramic pigments with sphene structure obtained by both spray-and freeze-drying techniques", Powder. Technol., Vol. 193, No. 1, 2009, pp. 1-5.

[5] C. T. Wu, Y. Ramaswamy, D. Gale, W.R. Yang, K.Q. Xiao, L.C. Zhang, Y.B. Yin, H. Zreiqat, "Novel sphene coatings on Ti-6Al-4V for orthopedic implants using sol-gel method", Acta. Biomater. , Vol. 4, No. 3, 2008, pp. 569-576.

[6] C. Wu, Y. Ramaswamy, A. Soeparto, H. Zreiqat, "Incorporation of titanium into calcium silicate improved their chemical stability and biological properties", J. Biomed. Mater. Res. Part A., Vol. 86, No. 2, 2008, pp. 402-410.

[7] Y. Ramaswamy, C. Wu, C. R. Dunstan, B. Hewson, T. Eindorf, G. I. Anderson, H. Zreiqat, "Sphene ceramics for orthopedic coating applications: An in vitro and in vivo study", Acta. Biomater., Vol. 5, No. 8, 2009, pp. 3192-3204.

[8] C. Wu, Y. Ramaswamy, X. Liu, G. Wang, H. Zreiqat, "Plasma-sprayed CaTiSiO5 ceramic coating on Ti-6Al-4V with excellent bonding strength, stability and cellular bioactivity",  J. R. Soc. Interface., Vol. 6, No. 31, 2009, pp. 159-168.

[9] M. Fathi, E. M. Zahrani, "Mechanical alloying synthesis and bioactivity evaluation of nanocrystalline fluoridated hydroxyapatite", J. Cryst. Growth., Vol. 311, No. 5, 2009, pp. 1392-1403.

[10] S. H. Park, H. J. Kim, J. I. Cho, Optimal central composite designs for fitting second order response surface linear regression models, in Response Surface Linear Regression Models, Physica-Verlag HD, Heidelberg, 2008, pp. 323-329.

[11] A. Amirjani, M. Bagheri, M. Heydari, S. Hesaraki, "Label-free surface plasmon resonance detection of hydrogen peroxide; a bio-inspired approach", Sens. Actuators. B, Vol. 227, 2016, pp. 373–382.

 [12] A. Amirjani, P. Marashi, D. H. Fatmehsari, "Effect of AgNO3  addition rate on aspect ratio of CuCl2–mediated synthesized silver nanowires using response surface methodology", Colloids. Surf., A, Vol. 444, 2014, pp. 33-39.

[13] A. Amirjani, P. Marashi, D. H. Fatmehsari, "Interactive effect of agitation rate and oxidative etching on growth mechanisms of silver nanowires during polyol process ", J. Exp. Nanosci., Vol. 10, 2015, pp. 1387-1400.

[14] E. S. Dana, Manual of Mineralogy, 17th ed., John Wiley &Sons,Inc., 1959, pp. 412–413.

[15] M. J. Mondrinos, R. Dembzynski, L. Lu, V.K. Byrapogu, D.M. Wootton, P.I. Lelkes, J. Zhou, "Porogen-based solid freeform fabrication of polycaprolactone–calcium phosphate scaffolds for tissue engineering", Biomater., Vol. 27, No. 25, 2006, pp. 4399-4408.

[16] I. Zein, D. W. Hutmacher, K. C. Tan, S. H. Teoh, "Fused deposition modeling of novel scaffold architectures for tissue engineering applications", Biomater., Vol. 23, No. 4, 2002, pp. 1169-1185.

[17] J. M. Williams, A. Adewunmi, R. M. Schek, C.L. Flanagan, P. H. Krebsbach, S. E. Feinberg, S. J. Hollister, S. Das, "Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering", Biomater., Vol. 26, No. 23, 2005, pp. 4817-4827.