The mechanical performance of silk and collagen nanoparticles for dental applications

Subject Areas : Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering

Mohammad Hossein Malekipour Esfahani ¹ , Behnoush Selahbarzin ²

1 - Dental Students Research Center, School of Dentistry, Isfahan University of Medical Sciences, Isfahan, Iran
2 - Lorestan Dental Department

Received: 2022-10-28 Accepted : 2023-02-19 Published : 2023-03-01

Keywords:

References:

 

• Amini, E., Nassireslami, E., Payandemehr, B., Khodagholi, F., Foolad, F., Khalaj, S., Hamedani, M. P., Azimi, L., & Sharifzadeh, M. (2015). Paradoxical role of PKA inhibitor on amyloidβ-induced memory deficit. Physiology & behavior, 149, 76–85


• Nassireslami, E., Nikbin, P., Payandemehr, B., Amini, E., Mohammadi, M., Vakilzadeh, G., Ghadiri, T., Noorbakhsh, F., & Sharifzadeh, M. (2013). A cAMP analog reverses contextual and tone memory deficits induced by a PKA inhibitor in Pavlovian fear conditioning. Pharmacology, biochemistry, and behavior, 105, 177–182.


• Zarei, M., Pourahmad, J. & Nassireslami, E. (2019). Toxicity of arsenic on isolated human lymphocytes: The key role of cytokines and intracellular calcium enhancement in arsenic-induced cell death. Main Group Metal Chemistry, 42(1), 125-134.


• Zarei, M., Pourahmad, J., Aghvami, M., Soodi, M. & Nassireslami, E. (2017). Lead acetate toxicity on human lymphocytes at non-cytotoxic concentrations detected in human blood. Main Group Metal Chemistry, 40(5-6), 105-112.


• Daud, S. M. S. M., Yusof, M. Y. P. M., Heo, C. C., Khoo, L. S., Singh, M. K. C., Mahmood, M. S., & Nawawi, H. (2022). Applications of drone in disaster management: A scoping review. Science & Justice, 62(1), 30-42.


• Yusof, N. A. M., Noor, E., Reduwan, N. H., & Yusof, M. Y. P. M. (2021). Diagnostic accuracy of periapical radiograph, cone beam computed tomography, and intrasurgical linear measurement techniques for assessing furcation defects: a longitudinal randomised controlled trial. Clinical oral investigations, 25(3), 923-932.


• Yusof, N. A. M., Noor, N., & Yusof, M. Y. P. M. (2019). The accuracy of linear measurements in cone beam computed tomography for assessing intrabony and furcation defects: A systematic review and meta-analysis. Journal of Oral Research, 8(6), 527-539.


• Ismail, A. F., Othman, A., Mustafa, N. S., Kashmoola, M. A., Mustafa, B. E., & Yusof, M. Y. P. M. (2018, June). Accuracy of different dental age assessment methods to determine chronological age among Malay children. In Journal of Physics: Conference Series (Vol. 1028, No. 1, p. 012102). IOP Publishing.


• Yusof, M. Y. P. M., Rahman, N. L. A., Asri, A. A. A., Othman, N. I., & Mokhtar, I. W. (2017). Repeat analysis of intraoral digital imaging performed by undergraduate students using a complementary metal oxide semiconductor sensor: An institutional case study. Imaging science in dentistry, 47(4), 233-239.


• Khandan, A., Abdellahi, M., Ozada, N., & Ghayour, H. (2016). Study of the bioactivity, wettability and hardness behaviour of the bovine hydroxyapatite-diopside bio-nanocomposite coating. Journal of the Taiwan Institute of Chemical Engineers, 60, 538-546.


• Khandan, A., Jazayeri, H., Fahmy, M. D., & Razavi, M. (2017). Hydrogels: Types, structure, properties, and applications. Biomat Tiss Eng, 4(27), 143-69.


• Salimi, K., Eghbali, S., Jasemi, A., Shokrani Foroushani, R., Joneidi Yekta, H., Latifi, M., ... & Khandan, A. (2020). An artificial soft tissue made of nano-alginate polymer using bioxfab 3D bioprinter for treatment of injuries. Nanochemistry Research, 5(2), 120-127.


• Heydary, H. A., Karamian, E., Poorazizi, E., Khandan, A., & Heydaripour, J. (2015). A novel nano-fiber of Iranian gum tragacanth-polyvinyl alcohol/nanoclay composite for wound healing applications. Procedia Materials Science, 11, 176-182.


• Nassireslami, E., Nikbin, P., Amini, E., Payandemehr, B., Shaerzadeh, F., Khodagholi, F., Yazdi, B. B., Kebriaeezadeh, A., Taghizadeh, G., & Sharifzadeh, M. (2016). How sodium arsenite improve amyloid β-induced memory deficit?. Physiology & behavior, 163, 97–106.


• Karamian, E., Motamedi, M. R. K., Khandan, A., Soltani, P., & Maghsoudi, S. (2014). An in vitro evaluation of novel NHA/zircon plasma coating on 316L stainless steel dental implant. Progress in Natural Science: Materials International, 24(2), 150-156.


• Karamian, E., Abdellahi, M., Khandan, A., & Abdellah, S. (2016). Introducing the fluorine doped natural hydroxyapatite-titania nanobiocomposite ceramic. Journal of Alloys and Compounds, 679, 375-383.


• Najafinezhad, A., Abdellahi, M., Ghayour, H., Soheily, A., Chami, A., & Khandan, A. (2017). A comparative study on the synthesis mechanism, bioactivity and mechanical properties of three silicate bioceramics. Materials Science and Engineering: C, 72, 259-267.


• Ghayour, H., Abdellahi, M., Ozada, N., Jabbrzare, S., & Khandan, A. (2017). Hyperthermia application of zinc doped nickel ferrite nanoparticles. Journal of Physics and Chemistry of Solids, 111, 464-472.


• Kazemi, A., Abdellahi, M., Khajeh-Sharafabadi, A., Khandan, A., & Ozada, N. (2017). Study of in vitro bioactivity and mechanical properties of diopside nano-bioceramic synthesized by a facile method using eggshell as raw material. Materials Science and Engineering: C, 71, 604-610.


• Khandan, A., Abdellahi, M., Ozada, N., & Ghayour, H. (2016). Study of the bioactivity, wettability and hardness behaviour of the bovine hydroxyapatite-diopside bio-nanocomposite coating. Journal of the Taiwan Institute of Chemical Engineers, 60, 538-546.


• Karamian, E., Khandan, A., Kalantar Motamedi, M. R., & Mirmohammadi, H. (2014). Surface characteristics and bioactivity of a novel natural HA/zircon nanocomposite coated on dental implants. BioMed research international, 2014.


• Jabbarzare, S., Abdellahi, M., Ghayour, H., Arpanahi, A., & Khandan, A. (2017). A study on the synthesis and magnetic properties of the cerium ferrite ceramic. Journal of Alloys and Compounds, 694, 800-807.


• Razavi, M., & Khandan, A. (2017). Safety, regulatory issues, long-term biotoxicity, and the processing environment. In Nanobiomaterials Science, Development and Evaluation (pp. 261-279). Woodhead Publishing.


• Khandan, A., Ozada, N., & Karamian, E. (2015). Novel microstructure mechanical activated nano composites for tissue engineering applications. J Bioeng Biomed Sci, 5(1), 1.


• Ghayour, H., Abdellahi, M., Bahmanpour, M., & Khandan, A. (2016). Simulation of dielectric behavior in RFeO $$ _ {3} $$3 orthoferrite ceramics (R= rare earth metals). Journal of Computational Electronics, 15(4), 1275-1283.


• Saeedi, M., Abdellahi, M., Rahimi, A., & Khandan, A. (2016). Preparation and characterization of nanocrystalline barium ferrite ceramic. Functional Materials Letters, 9(05), 1650068.


• Karamian, E. B., Motamedi, M. R., Mirmohammadi, K., Soltani, P. A., & Khandan, A. M. (2014). Correlation between crystallographic parameters and biodegradation rate of natural hydroxyapatite in physiological solutions. Indian J Sci Res, 4(3), 092-9.


• Khandan, A., & Esmaeili, S. (2019). Fabrication of polycaprolactone and polylactic acid shapeless scaffolds via fused deposition modelling technology. Journal of Advanced Materials and Processing, 7(4), 16-29.


• Anttonen, V., Tanner, T., Kämppi, A., Päkkilä, J., Tjäderhane, L., & Patinen, P. (2012). A methodological pilot study on oral health of young, healthy males. Dental Hypotheses, 3(3), 106.


• Gupta, R., Thakur, N., Thakur, S., Gupta, B., & Gupta, M. (2013). Talon cusp: a case report with management guidelines for practicing dentists. Dental Hypotheses, 4(2), 67.


• Kjaer, I. (2013). External root resorption: Different etiologies explained from the composition of the human root-close periodontal membrane. Dental Hypotheses, 4(3), 75.


• Motamedi, M. R. K., Behzadi, A., Khodadad, N., Zadeh, A. K., & Nilchian, F. (2014). Oral health and quality of life in children: a cross-sectional study. Dental Hypotheses, 5(2), 53.


• Narayanan, N., & Thangavelu, L. (2015). Salvia officinalis in dentistry. Dental Hypotheses, 6(1), 27.


• Khandan, A., Karamian, E., & Bonakdarchian, M. (2014). Mechanochemical synthesis evaluation of nanocrystalline bone-derived bioceramic powder using for bone tissue engineering. Dental Hypotheses, 5(4), 155.


• Ghomi, F., Daliri, M., Godarzi, V., & Hemati, M. (2021). A novel investigation on the characterization of bioactive glass cement and chitosan-gelatin membrane for jawbone tissue engineering. Journal of Nanoanalysis, 8(4), 292-301.


• Sotoudeh, A., Darbemamieh, G., Goodarzi, V., Shojaei, S., & Asefnejad, A. (2021). Tissue engineering needs new biomaterials: Poly (xylitol-dodecanedioic acid)–co-polylactic acid (PXDDA-co-PLA) and its nanocomposites. European Polymer Journal, 152, 110469.


• Mirzadeh, S., Asefnejad, A., Khonakdar, H. A., & Jafari, S. H. (2021). Improved surface properties in spray-coated PU/TiO2/graphene hybrid nanocomposites through nonsolvent-induced phase separation. Surface and Coatings Technology, 405, 126507.


• Eslami, M., Mokhtarian, A., Pirmoradian, M., Seifzadeh, A., & Rafiaei, M. (2020). Design and fabrication of a passive upper limb rehabilitation robot with adjustable automatic balance based on variable mass of end-effector. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-8.


• Kardan-Halvaei, M., Morovvati, M. R., & Mollaei-Dariani, B. (2020). Crystal plasticity finite element simulation and experimental investigation of the micro-upsetting process of OFHC copper. Journal of Micromechanics and Microengineering, 30(7), 075005.


• Khandan, A., & Ozada, N. (2017). Bredigite-Magnetite (Ca7MgSi4O16-Fe3O4) nanoparticles: A study on their magnetic properties. Journal of Alloys and Compounds, 726, 729-736.


• Eslami, M., Mokhtarian, A., Pirmoradian, M., Seifzadeh, S. A., & Rafiaei, S. M. (2020). Designing and creating a virtual reality environment and a wearable glove with control and evaluation capability to rehabilitate patients. Journal of Health and Biomedical Informatics, 7(2), 161-170.


• Sharafabadi, A. K., Abdellahi, M., Kazemi, A., Khandan, A., & Ozada, N. (2017). A novel and economical route for synthesizing akermanite (Ca2MgSi2O7) nano-bioceramic. Materials Science and Engineering: C, 71, 1072-1078.


• Fazlollahi, M., Morovvati, M. R., & Mollaei Dariani, B. (2019). Theoretical, numerical and experimental investigation of hydro-mechanical deep drawing of steel/polymer/steel sandwich sheets. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 233(5), 1529-1546.


• Saeedi, M. R., Morovvati, M. R., & Alizadeh-Vaghasloo, Y. (2018). Experimental and numerical study of mode-I and mixed-mode fracture of ductile U-notched functionally graded materials. International Journal of Mechanical Sciences, 144, 324-340.


• Kamarian, S., Bodaghi, M., Isfahani, R. B., & Song, J. I. (2021). Thermal buckling analysis of sandwich plates with soft core and CNT-Reinforced composite face sheets. Journal of Sandwich Structures & Materials, 23(8), 3606-3644.


• Kamarian, S., Bodaghi, M., Isfahani, R. B., & Song, J. I. (2022). A comparison between the effects of shape memory alloys and carbon nanotubes on the thermal buckling of laminated composite beams. Mechanics Based Design of Structures and Machines, 50(7), 2250-2273.


• Monfared, R. M., Ayatollahi, M. R., & Isfahani, R. B. (2018). Synergistic effects of hybrid MWCNT/nanosilica on the tensile and tribological properties of woven carbon fabric epoxy composites. Theoretical and Applied Fracture Mechanics, 96, 272-284.


• Kamarian, S., Bodaghi, M., Isfahani, R. B., & Song, J. I. (2021). Thermal buckling analysis of sandwich plates with soft core and CNT-Reinforced composite face sheets. Journal of Sandwich Structures & Materials, 23(8), 3606-3644.


• Moshayedi, A. J., Jinsong, L., & Liao, L. (2019). AGV (automated guided vehicle) robot: Mission and obstacles in design and performance. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 12(4), 5-18.


• Esfahani, O. T., & Moshayedi, A. J. (2014). Accuracy of the Positioning Systems for the Tracking of Alzheimer's Patients-A Review. International Journal of Applied Electronics in Physics & Robotics, 2(2), 10-16.


• Moshayedi, A. J., & Gharpure, D. C. (2012, March). Priority based algorithm for Plume tracking Robot. In 2012 1st International Symposium on Physics and Technology of Sensors (ISPTS-1) (pp. 51-54). IEEE.


• Moshayedi, A. J., Roy, A. S., Kolahdooz, A., & Shuxin, Y. (2022). Deep learning application pros and cons over algorithm. EAI Endorsed Transactions on AI and Robotics, 1, 1-13.


• Malekipour Esfahani, M. H., Sharifinezhad, N., Hemati, M., & Gholami, A. M. (2021). Evaluation of mechanical properties of bioglass materials for dentistry application. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 13(4), 19-29.


• Heydari, S., Sadat Mirinejad, M., Malekipour Esfahani, M. H., Karimian, F., Attaeyan, A., & Latifi, M. (2021). A brief review on titanium alloy for dental, biotechnology and biomedical applications. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 13(2), 47-58.


• Ozada, N., Yazdi, S. G., Khandan, A., & Karimzadeh, M. (2018). A brief review of reverse shoulder prosthesis: arthroplasty, complications, revisions, and development. Trauma Monthly, 23(3), e58163-e58163.


• Ehsani, A., Mahale, R. S., Shayegan, S., Attaeyan, A., Ghorbani, A., Vasanth, S., ... & Asefnejad, A. (2022). A review of the treatment of bone tumours by hyperthermia using magnetic nanoparticles. Journal of Nanoanalysis.


• Morovvati, M. R., & Mollaei-Dariani, B. (2018). The formability investigation of CNT-reinforced aluminum nano-composite sheets manufactured by accumulative roll bonding. The International Journal of Advanced Manufacturing Technology, 95(9), 3523-3533.


• Monfared, R. M., Ayatollahi, M. R., & Isfahani, R. B. (2018). Synergistic effects of hybrid MWCNT/nanosilica on the tensile and tribological properties of woven carbon fabric epoxy composites. Theoretical and Applied Fracture Mechanics, 96, 272-284.


• Karimianmanesh, M., Azizifard, E., Javidanbashiz, N., Latifi, M., Ghorbani, A., & Shahriari, S. (2021). Feasibility study of mechanical properties of alginates for neuroscience application using finite element method. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 13(3), 53-62.


• Asgari, F., Minooei, A., Abdolahi, S., Shokrani Foroushani, R., & Ghorbani, A. (2021). A new approach using Machine Learning and Deep Learning for the prediction of cancer tumor. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 13(4), 41-51.


• Ghorbani, A., Shahriari, S., & Gholami, A. M. (2021). Investigation of cell biomechanics and the effect of biomechanical stimuli on cancer and their characteristics. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 13(4), 67-79.


• Tamjidi, S., Esmaeili, H., & Moghadas, B. K. (2021). Performance of functionalized magnetic nanocatalysts and feedstocks on biodiesel production: a review study. Journal of Cleaner Production, 305, 127200.


• Afrooz, M. R., Moghadas, B. K., & Tamjidi, S. (2022). Performance of functionalized bacterial as bio-adsorbent for intensifying heavy metal uptake from wastewater: A review study. Journal of Alloys and Compounds, 893, 162321.


• Barbaz-Isfahani, R., Saber-Samandari, S., & Salehi, M. (2022). Novel electrosprayed enhanced microcapsules with different nanoparticles containing healing agents in a single multicore microcapsule. International Journal of Biological Macromolecules, 200, 532-542.


• Barbaz-Isfahani, R., Saber-Samandari, S., & Salehi, M. (2022). Experimental and numerical research on healing performance of reinforced microcapsule-based self-healing polymers using nanoparticles. Journal of Reinforced Plastics and Composites, 07316844221102945.


• Balkaya, U., & Karaman, O. (2019, October). Fabrication and Characterization of Silicate Additive Synthetic Bone Grafts in Defined Geometries. In 2019 Medical Technologies Congress (TIPTEKNO) (pp. 1-3). IEEE.


• Gomes, S., Nedelec, J. M., Jallot, E., Sheptyakov, D., & Renaudin, G. (2011). Silicon location in silicate-substituted calcium phosphate ceramics determined by neutron diffraction. Crystal growth & design, 11(9), 4017-4026.


• GÜRGİT, İ., GÖKMEN, O., KOCATÜRKMEN, A., NAMLI, İ., Günnur, O. N. A. K., & KARAMAN, O. (2020, November). Proliferation and Viability of L929 Cells in Synthetic Flexible Bone Grafts. In 2020 Medical Technologies Congress (TIPTEKNO) (pp. 1-4). IEEE.


• Nitta, S. K., & Numata, K. (2013). Biopolymer-based nanoparticles for drug/gene delivery and tissue engineering. International journal of molecular sciences, 14(1), 1629-1654.