The mechanical performance of silk and collagen nanoparticles for dental applications
الموضوعات : فصلنامه شبیه سازی و تحلیل تکنولوژی های نوین در مهندسی مکانیک
Mohammad Hossein Malekipour Esfahani
1
(Dental Students Research Center, School of Dentistry, Isfahan University of Medical Sciences, Isfahan, Iran)
Behnoush Selahbarzin
2
(Lorestan Dental Department)
الکلمات المفتاحية: Mechanical Properties, Silk, Tricalcium phosphate, Drug/gene carriers,
ملخص المقالة :
Today, great interest has been generated by dental science and engineering researchers to use bio-based nanoparticles to deliver therapeutic molecules such as drugs, genes, and tissue engineering. Controlling particle size, charge, surface morphology and release rate of loaded molecules is important for using nanoparticles based on biopolymers and bioactive ceramics such as tricalcium phosphates (TCP) as drug/gene carriers. Recently, drug release systems and nanoparticle systems have attracted much attention as suitable carriers. Drug delivery systems are methods used to ensure that drugs reach the required areas in the body. Natural polymers such as proteins have attracted a lot of attention due to their biocompatibility properties with living organisms. Among polymers, silk fibers have attracted the attention of researchers in the field of textiles and medicine due to their good properties such as low specific gravity, strength and high thermal resistance. In addition, their use as carriers of drugs, therapeutic genes and biomaterials for tissue engineering with applications in the field of dental and orthopedic materials has been reviewed.
المصادر:
Amini, E., Nassireslami, E., Payandemehr, B., Khodagholi, F., Foolad, F., Khalaj, S., Hamedani, M. P., Azimi, L., & Sharifzadeh, M. (2015). Paradoxical role of PKA inhibitor on amyloidβ-induced memory deficit. Physiology & behavior, 149, 76–85
Nassireslami, E., Nikbin, P., Payandemehr, B., Amini, E., Mohammadi, M., Vakilzadeh, G., Ghadiri, T., Noorbakhsh, F., & Sharifzadeh, M. (2013). A cAMP analog reverses contextual and tone memory deficits induced by a PKA inhibitor in Pavlovian fear conditioning. Pharmacology, biochemistry, and behavior, 105, 177–182.
Zarei, M., Pourahmad, J. & Nassireslami, E. (2019). Toxicity of arsenic on isolated human lymphocytes: The key role of cytokines and intracellular calcium enhancement in arsenic-induced cell death. Main Group Metal Chemistry, 42(1), 125-134.
Zarei, M., Pourahmad, J., Aghvami, M., Soodi, M. & Nassireslami, E. (2017). Lead acetate toxicity on human lymphocytes at non-cytotoxic concentrations detected in human blood. Main Group Metal Chemistry, 40(5-6), 105-112.
Daud, S. M. S. M., Yusof, M. Y. P. M., Heo, C. C., Khoo, L. S., Singh, M. K. C., Mahmood, M. S., & Nawawi, H. (2022). Applications of drone in disaster management: A scoping review. Science & Justice, 62(1), 30-42.
Yusof, N. A. M., Noor, E., Reduwan, N. H., & Yusof, M. Y. P. M. (2021). Diagnostic accuracy of periapical radiograph, cone beam computed tomography, and intrasurgical linear measurement techniques for assessing furcation defects: a longitudinal randomised controlled trial. Clinical oral investigations, 25(3), 923-932.
Yusof, N. A. M., Noor, N., & Yusof, M. Y. P. M. (2019). The accuracy of linear measurements in cone beam computed tomography for assessing intrabony and furcation defects: A systematic review and meta-analysis. Journal of Oral Research, 8(6), 527-539.
Ismail, A. F., Othman, A., Mustafa, N. S., Kashmoola, M. A., Mustafa, B. E., & Yusof, M. Y. P. M. (2018, June). Accuracy of different dental age assessment methods to determine chronological age among Malay children. In Journal of Physics: Conference Series (Vol. 1028, No. 1, p. 012102). IOP Publishing.
Yusof, M. Y. P. M., Rahman, N. L. A., Asri, A. A. A., Othman, N. I., & Mokhtar, I. W. (2017). Repeat analysis of intraoral digital imaging performed by undergraduate students using a complementary metal oxide semiconductor sensor: An institutional case study. Imaging science in dentistry, 47(4), 233-239.
Khandan, A., Abdellahi, M., Ozada, N., & Ghayour, H. (2016). Study of the bioactivity, wettability and hardness behaviour of the bovine hydroxyapatite-diopside bio-nanocomposite coating. Journal of the Taiwan Institute of Chemical Engineers, 60, 538-546.
Khandan, A., Jazayeri, H., Fahmy, M. D., & Razavi, M. (2017). Hydrogels: Types, structure, properties, and applications. Biomat Tiss Eng, 4(27), 143-69.
Salimi, K., Eghbali, S., Jasemi, A., Shokrani Foroushani, R., Joneidi Yekta, H., Latifi, M., ... & Khandan, A. (2020). An artificial soft tissue made of nano-alginate polymer using bioxfab 3D bioprinter for treatment of injuries. Nanochemistry Research, 5(2), 120-127.
Heydary, H. A., Karamian, E., Poorazizi, E., Khandan, A., & Heydaripour, J. (2015). A novel nano-fiber of Iranian gum tragacanth-polyvinyl alcohol/nanoclay composite for wound healing applications. Procedia Materials Science, 11, 176-182.
Nassireslami, E., Nikbin, P., Amini, E., Payandemehr, B., Shaerzadeh, F., Khodagholi, F., Yazdi, B. B., Kebriaeezadeh, A., Taghizadeh, G., & Sharifzadeh, M. (2016). How sodium arsenite improve amyloid β-induced memory deficit?. Physiology & behavior, 163, 97–106.
Karamian, E., Motamedi, M. R. K., Khandan, A., Soltani, P., & Maghsoudi, S. (2014). An in vitro evaluation of novel NHA/zircon plasma coating on 316L stainless steel dental implant. Progress in Natural Science: Materials International, 24(2), 150-156.
Karamian, E., Abdellahi, M., Khandan, A., & Abdellah, S. (2016). Introducing the fluorine doped natural hydroxyapatite-titania nanobiocomposite ceramic. Journal of Alloys and Compounds, 679, 375-383.
Najafinezhad, A., Abdellahi, M., Ghayour, H., Soheily, A., Chami, A., & Khandan, A. (2017). A comparative study on the synthesis mechanism, bioactivity and mechanical properties of three silicate bioceramics. Materials Science and Engineering: C, 72, 259-267.
Ghayour, H., Abdellahi, M., Ozada, N., Jabbrzare, S., & Khandan, A. (2017). Hyperthermia application of zinc doped nickel ferrite nanoparticles. Journal of Physics and Chemistry of Solids, 111, 464-472.
Kazemi, A., Abdellahi, M., Khajeh-Sharafabadi, A., Khandan, A., & Ozada, N. (2017). Study of in vitro bioactivity and mechanical properties of diopside nano-bioceramic synthesized by a facile method using eggshell as raw material. Materials Science and Engineering: C, 71, 604-610.
Khandan, A., Abdellahi, M., Ozada, N., & Ghayour, H. (2016). Study of the bioactivity, wettability and hardness behaviour of the bovine hydroxyapatite-diopside bio-nanocomposite coating. Journal of the Taiwan Institute of Chemical Engineers, 60, 538-546.
Karamian, E., Khandan, A., Kalantar Motamedi, M. R., & Mirmohammadi, H. (2014). Surface characteristics and bioactivity of a novel natural HA/zircon nanocomposite coated on dental implants. BioMed research international, 2014.
Jabbarzare, S., Abdellahi, M., Ghayour, H., Arpanahi, A., & Khandan, A. (2017). A study on the synthesis and magnetic properties of the cerium ferrite ceramic. Journal of Alloys and Compounds, 694, 800-807.
Razavi, M., & Khandan, A. (2017). Safety, regulatory issues, long-term biotoxicity, and the processing environment. In Nanobiomaterials Science, Development and Evaluation (pp. 261-279). Woodhead Publishing.
Khandan, A., Ozada, N., & Karamian, E. (2015). Novel microstructure mechanical activated nano composites for tissue engineering applications. J Bioeng Biomed Sci, 5(1), 1.
Ghayour, H., Abdellahi, M., Bahmanpour, M., & Khandan, A. (2016). Simulation of dielectric behavior in RFeO $$ _ {3} $$3 orthoferrite ceramics (R= rare earth metals). Journal of Computational Electronics, 15(4), 1275-1283.
Saeedi, M., Abdellahi, M., Rahimi, A., & Khandan, A. (2016). Preparation and characterization of nanocrystalline barium ferrite ceramic. Functional Materials Letters, 9(05), 1650068.
Karamian, E. B., Motamedi, M. R., Mirmohammadi, K., Soltani, P. A., & Khandan, A. M. (2014). Correlation between crystallographic parameters and biodegradation rate of natural hydroxyapatite in physiological solutions. Indian J Sci Res, 4(3), 092-9.
Khandan, A., & Esmaeili, S. (2019). Fabrication of polycaprolactone and polylactic acid shapeless scaffolds via fused deposition modelling technology. Journal of Advanced Materials and Processing, 7(4), 16-29.
Anttonen, V., Tanner, T., Kämppi, A., Päkkilä, J., Tjäderhane, L., & Patinen, P. (2012). A methodological pilot study on oral health of young, healthy males. Dental Hypotheses, 3(3), 106.
Gupta, R., Thakur, N., Thakur, S., Gupta, B., & Gupta, M. (2013). Talon cusp: a case report with management guidelines for practicing dentists. Dental Hypotheses, 4(2), 67.
Kjaer, I. (2013). External root resorption: Different etiologies explained from the composition of the human root-close periodontal membrane. Dental Hypotheses, 4(3), 75.
Motamedi, M. R. K., Behzadi, A., Khodadad, N., Zadeh, A. K., & Nilchian, F. (2014). Oral health and quality of life in children: a cross-sectional study. Dental Hypotheses, 5(2), 53.
Narayanan, N., & Thangavelu, L. (2015). Salvia officinalis in dentistry. Dental Hypotheses, 6(1), 27.
Khandan, A., Karamian, E., & Bonakdarchian, M. (2014). Mechanochemical synthesis evaluation of nanocrystalline bone-derived bioceramic powder using for bone tissue engineering. Dental Hypotheses, 5(4), 155.
Ghomi, F., Daliri, M., Godarzi, V., & Hemati, M. (2021). A novel investigation on the characterization of bioactive glass cement and chitosan-gelatin membrane for jawbone tissue engineering. Journal of Nanoanalysis, 8(4), 292-301.
Sotoudeh, A., Darbemamieh, G., Goodarzi, V., Shojaei, S., & Asefnejad, A. (2021). Tissue engineering needs new biomaterials: Poly (xylitol-dodecanedioic acid)–co-polylactic acid (PXDDA-co-PLA) and its nanocomposites. European Polymer Journal, 152, 110469.
Mirzadeh, S., Asefnejad, A., Khonakdar, H. A., & Jafari, S. H. (2021). Improved surface properties in spray-coated PU/TiO2/graphene hybrid nanocomposites through nonsolvent-induced phase separation. Surface and Coatings Technology, 405, 126507.
Eslami, M., Mokhtarian, A., Pirmoradian, M., Seifzadeh, A., & Rafiaei, M. (2020). Design and fabrication of a passive upper limb rehabilitation robot with adjustable automatic balance based on variable mass of end-effector. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-8.
Kardan-Halvaei, M., Morovvati, M. R., & Mollaei-Dariani, B. (2020). Crystal plasticity finite element simulation and experimental investigation of the micro-upsetting process of OFHC copper. Journal of Micromechanics and Microengineering, 30(7), 075005.
Khandan, A., & Ozada, N. (2017). Bredigite-Magnetite (Ca7MgSi4O16-Fe3O4) nanoparticles: A study on their magnetic properties. Journal of Alloys and Compounds, 726, 729-736.
Eslami, M., Mokhtarian, A., Pirmoradian, M., Seifzadeh, S. A., & Rafiaei, S. M. (2020). Designing and creating a virtual reality environment and a wearable glove with control and evaluation capability to rehabilitate patients. Journal of Health and Biomedical Informatics, 7(2), 161-170.
Sharafabadi, A. K., Abdellahi, M., Kazemi, A., Khandan, A., & Ozada, N. (2017). A novel and economical route for synthesizing akermanite (Ca2MgSi2O7) nano-bioceramic. Materials Science and Engineering: C, 71, 1072-1078.
Fazlollahi, M., Morovvati, M. R., & Mollaei Dariani, B. (2019). Theoretical, numerical and experimental investigation of hydro-mechanical deep drawing of steel/polymer/steel sandwich sheets. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 233(5), 1529-1546.
Saeedi, M. R., Morovvati, M. R., & Alizadeh-Vaghasloo, Y. (2018). Experimental and numerical study of mode-I and mixed-mode fracture of ductile U-notched functionally graded materials. International Journal of Mechanical Sciences, 144, 324-340.
Kamarian, S., Bodaghi, M., Isfahani, R. B., & Song, J. I. (2021). Thermal buckling analysis of sandwich plates with soft core and CNT-Reinforced composite face sheets. Journal of Sandwich Structures & Materials, 23(8), 3606-3644.
Kamarian, S., Bodaghi, M., Isfahani, R. B., & Song, J. I. (2022). A comparison between the effects of shape memory alloys and carbon nanotubes on the thermal buckling of laminated composite beams. Mechanics Based Design of Structures and Machines, 50(7), 2250-2273.
Monfared, R. M., Ayatollahi, M. R., & Isfahani, R. B. (2018). Synergistic effects of hybrid MWCNT/nanosilica on the tensile and tribological properties of woven carbon fabric epoxy composites. Theoretical and Applied Fracture Mechanics, 96, 272-284.
Kamarian, S., Bodaghi, M., Isfahani, R. B., & Song, J. I. (2021). Thermal buckling analysis of sandwich plates with soft core and CNT-Reinforced composite face sheets. Journal of Sandwich Structures & Materials, 23(8), 3606-3644.
Moshayedi, A. J., Jinsong, L., & Liao, L. (2019). AGV (automated guided vehicle) robot: Mission and obstacles in design and performance. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 12(4), 5-18.
Esfahani, O. T., & Moshayedi, A. J. (2014). Accuracy of the Positioning Systems for the Tracking of Alzheimer's Patients-A Review. International Journal of Applied Electronics in Physics & Robotics, 2(2), 10-16.
Moshayedi, A. J., & Gharpure, D. C. (2012, March). Priority based algorithm for Plume tracking Robot. In 2012 1st International Symposium on Physics and Technology of Sensors (ISPTS-1) (pp. 51-54). IEEE.
Moshayedi, A. J., Roy, A. S., Kolahdooz, A., & Shuxin, Y. (2022). Deep learning application pros and cons over algorithm. EAI Endorsed Transactions on AI and Robotics, 1, 1-13.
Malekipour Esfahani, M. H., Sharifinezhad, N., Hemati, M., & Gholami, A. M. (2021). Evaluation of mechanical properties of bioglass materials for dentistry application. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 13(4), 19-29.
Heydari, S., Sadat Mirinejad, M., Malekipour Esfahani, M. H., Karimian, F., Attaeyan, A., & Latifi, M. (2021). A brief review on titanium alloy for dental, biotechnology and biomedical applications. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 13(2), 47-58.
Ozada, N., Yazdi, S. G., Khandan, A., & Karimzadeh, M. (2018). A brief review of reverse shoulder prosthesis: arthroplasty, complications, revisions, and development. Trauma Monthly, 23(3), e58163-e58163.
Ehsani, A., Mahale, R. S., Shayegan, S., Attaeyan, A., Ghorbani, A., Vasanth, S., ... & Asefnejad, A. (2022). A review of the treatment of bone tumours by hyperthermia using magnetic nanoparticles. Journal of Nanoanalysis.
Morovvati, M. R., & Mollaei-Dariani, B. (2018). The formability investigation of CNT-reinforced aluminum nano-composite sheets manufactured by accumulative roll bonding. The International Journal of Advanced Manufacturing Technology, 95(9), 3523-3533.
Monfared, R. M., Ayatollahi, M. R., & Isfahani, R. B. (2018). Synergistic effects of hybrid MWCNT/nanosilica on the tensile and tribological properties of woven carbon fabric epoxy composites. Theoretical and Applied Fracture Mechanics, 96, 272-284.
Karimianmanesh, M., Azizifard, E., Javidanbashiz, N., Latifi, M., Ghorbani, A., & Shahriari, S. (2021). Feasibility study of mechanical properties of alginates for neuroscience application using finite element method. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 13(3), 53-62.
Asgari, F., Minooei, A., Abdolahi, S., Shokrani Foroushani, R., & Ghorbani, A. (2021). A new approach using Machine Learning and Deep Learning for the prediction of cancer tumor. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 13(4), 41-51.
Ghorbani, A., Shahriari, S., & Gholami, A. M. (2021). Investigation of cell biomechanics and the effect of biomechanical stimuli on cancer and their characteristics. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 13(4), 67-79.
Tamjidi, S., Esmaeili, H., & Moghadas, B. K. (2021). Performance of functionalized magnetic nanocatalysts and feedstocks on biodiesel production: a review study. Journal of Cleaner Production, 305, 127200.
Afrooz, M. R., Moghadas, B. K., & Tamjidi, S. (2022). Performance of functionalized bacterial as bio-adsorbent for intensifying heavy metal uptake from wastewater: A review study. Journal of Alloys and Compounds, 893, 162321.
Barbaz-Isfahani, R., Saber-Samandari, S., & Salehi, M. (2022). Novel electrosprayed enhanced microcapsules with different nanoparticles containing healing agents in a single multicore microcapsule. International Journal of Biological Macromolecules, 200, 532-542.
Barbaz-Isfahani, R., Saber-Samandari, S., & Salehi, M. (2022). Experimental and numerical research on healing performance of reinforced microcapsule-based self-healing polymers using nanoparticles. Journal of Reinforced Plastics and Composites, 07316844221102945.
Balkaya, U., & Karaman, O. (2019, October). Fabrication and Characterization of Silicate Additive Synthetic Bone Grafts in Defined Geometries. In 2019 Medical Technologies Congress (TIPTEKNO) (pp. 1-3). IEEE.
Gomes, S., Nedelec, J. M., Jallot, E., Sheptyakov, D., & Renaudin, G. (2011). Silicon location in silicate-substituted calcium phosphate ceramics determined by neutron diffraction. Crystal growth & design, 11(9), 4017-4026.
GÜRGİT, İ., GÖKMEN, O., KOCATÜRKMEN, A., NAMLI, İ., Günnur, O. N. A. K., & KARAMAN, O. (2020, November). Proliferation and Viability of L929 Cells in Synthetic Flexible Bone Grafts. In 2020 Medical Technologies Congress (TIPTEKNO) (pp. 1-4). IEEE.
Nitta, S. K., & Numata, K. (2013). Biopolymer-based nanoparticles for drug/gene delivery and tissue engineering. International journal of molecular sciences, 14(1), 1629-1654.
