Improvement of Microstructure and Mechanical Properties of Manganese Steels by Adding Boron Alloying Element

Subject Areas : Journal of Environmental Friendly Materials

N. Arab ¹

1 - Department of Materials Science, Saveh Branch, Islamic Azad University, Saveh, Iran

Received: 2018-05-19 Accepted : 2018-07-27 Published : 2018-09-01

Keywords: Mechanical Properties, Microstructure, Hadfield Steels, Boron Content Manganese Steels, Carbide Distribution,

References:

[1] Akeel D. Subhi and Omar A. Abdulrazaq, Eng. Technol., 25(6)2007.

[2] A. K. Srivastava and K. Das, J. Mater. Sci 43 (2008), 5654.

[3] Bouaziz, S. Allain, C. P. Scott, D. Cugy, Mater. Sci., 15(2011), 141.

[4] F. Haakonsen, “Optimizing of Strømhard austenitic manganese steel” Thesis for the degree of Philosophiae Doctor Trondheim, May 2009.

[5] Hull D. In: Deformation twinning, proceedings of a metallurgical society conference. Gainesville, Floride, Gordon and Breach Science, New-York; 1964.

[6] J. O. Agunsoye1, S. A. Balogun1, D. E. Esezobor1 and M. Nganbe, Scripta. Mater. 12(42)2000, 1107.

[7] M. Abbasia, S. Kheirandisha,b, Y. Kharrazi a, J. Hedjazi, Mater. Sci. Eng.  513(514)(2009), 72.

[8] S. W. Bhero, B. Nyembe, and K. Lentsoana, International Conference on Mining, Mineral Processing and Metallurgical Engineering (ICMMME’2013) April 15-16, 2013.

[9] S. A. Balogun, D. E. Esezobor, J. O. Agunsoye, J.  Minerals Mater. Character. Eng., 7(3)2008, 277.

[10] W. Zhang, J. Wu, Y. Wen, J. Ye, N. Li, J. Mater. Sci., 45(2010), 3433.

[11] X. Jingpei, J. Qichuuan, H. Zhenming, L. Quanshun and K. Sommer, Chin. J. Met. Sci. Technol., (8)1992.

[12] Ranjan TV, Sharma CP and Sharma A. Heat treatment principles and techniques. New Delhi: Prentice-Hall of India Private Limited; 1999.

[13] Perry RH and Green DW. Solid-solid operation and processing. In: Chemical engineers handbook. 8th ed. New York: Mc Graw-Hill Companies; 2008, 56.

[14] T. Jing and F. Zhang, Mater. Letter., 31(3-6)1997, 275.

[15] R. W. Smith, A. DeMonte and W. B. F. Mackay, (153-154)2004, 589.

[16] H. Li, J. Zhihao, L. Jinde and T. Jun, Modulated. Mater. Des., 23(8)2002, 717.

[17] B. Emin, A. Frazal, Khalid and L. Chritopher, J. Mater. Process. Technol., 147(2), 2004, 145.

[18] C. Efstathion and H. Sehitoglu, Scripta. Mater. 59(10), 2008, 1103.

[19] C. Efstathion and H. Sehitoglu, Acta. Mater., 58(5)2009, 1479.

 [20] Dobrzanki LA, Grajcar A and Borek W., J. of Mater. Manuf. Eng., 31(2), 2008, 218.

[21] A. García, A. Varela, L. García, M. C. S. Río, Naya and M. Suárez, Comparing. Wear., (258)2005, 203.

[22] X. Yunhan, F. Liang, C. Qihong and Z. Jinhua, Mater. Sci. Forum., (117)2005, 475.

[23] Majid A, Shahram K, Yousef K and Jalal H, Wear., 268(1-2)2010, 202.

[24] S. Kuyucak and R. Zavadil, AFS Trans., (108)2000, 120.