List of Articles Steel

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - A study of the corrosion of stainless steel 304L coated with a 190 nm-thick manganese layer and annealed with nitrogen flux in a 0.4-mole solution of H2SO4 at different temperatures
  Farzaneh Modiri Hadi Savaloni
  10.1007/s40094-019-00345-5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - On the corrosion resistance of AISI 316L-type stainless steel coated with manganese and annealed with flow of oxygen
  Hadi Savaloni Ensieh Agha-Taheri Fateme Abdi
  10.1007/s40094-016-0213-0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Anti-corrosion properties of stainless steel 304L coated with Mn-based thin film and annealed with nitrogen flux exposed to saline solution under various temperatures
  Farzaneh Modiri Hadi Savaloni
  10.1007/s40094-020-00381-6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Developing Organization Redesign Policies based on Burton’s Multi-Contingency Model with a Business Intelligence Development Approach (Case: Esfahan Steel Company)
  Mahdi Bahrami Akbar Etebarian Reza Ebrahimzadeh Dastjerdi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Critical Discourse Analysis "Man of Steel"(film) Relying on the metaphysical debates on Transmodernism paradigm
  Mahdi Yaghobi aliakbar Farhangi Seyyed Jamaluddin Tabibi Tabibi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Growth of carbon nanostructures upon stainless steel and brass by thermal chemical vapor deposition method
  Z. Haghparast F. Bisepar S. A. Khorrami Sh. Moradi H. Aghaie
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - A two-stage study of grey system theory and DEA in strategic alliance: An application in Vietnamese Steel industry
  Hoang-Phu Nguyen Nhu-Ty Nguyen
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Evaluating of staff’s performance with job satisfaction and Organizational Commitment approach by DEA (case study: Khuzestan Oxin Steel Company)
  Mohammad Khodamoradi Mohammad-Hasan Behzadi Mohsen Rostamy-MaleKhalifeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Environmental risk assessment of steel plant using ANP and TOPSIS methods (Case study: Hamadan Wian Steel Plant)
  Fatemeh Zahmatkesh Maryam Kiani Sadr Mehrdad Cheraghi
  10.22034/jest.2018.21029.3007
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Environmental Risk Assessment of Sponge Iron production unit in Khorasan Steel Company Using Comparative Methods ETBA and JSA
  Samaneh Sanjari Sahar Rezaian Seyed Ali Jozi
  10.22034/jest.2017.11220
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Presenting a strategic model of marketing capacities and its impact on financial performance in order to develop investment in Khuzestan steel industry
  azadeh tajamir leila Andervazh mohammad hossinpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Characterization in "Crossings" Novel by Danielle Steel
  Reyhaneh Nami Sharif Abad Reza Ashrafzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Analyzing feminism and of the novel "Heart of Steel" by Moniro Ravanipour based on Yung's individuality psychoanalytic criticism
  fereshteh naseri
  10.30495/dk.2020.676032
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - A DFT and Molecular Dynamics Study on Inhibitory Action of Three Amine Derivatives on Corrosion of Carbon Steel
  Mohammad Hossein Ghorbani Maryam Dehdab
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Corrosion Inhibition of AISI 304 Stainless Steel using Zinc Nitride Coating
  Fatemeh Abdi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Electrochemical Investigation of Coconut Oil as Green Corrosion Inhibitor for ST37 Carbon Steel Protection
  Mohammad Hossein Ghorbani Arash Ghoorchian Hamideh Kalhor
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Malvasylvestris Flower Extracts as Green Corrosion Inhibitor for Carbon Steel in HCl Solution
  Razieh Salahandish Ali Ghaffarinejad Ali Moradpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Electrochemical and Theoretical Studies of Adsorption of 1-H-benzotriazole at Stainless Steel in Hydrochloric acid Solution Interface as Corrosion Inhibitors
  Nazanin Behineh Mohammad Hossain Zargazi Hesam Baheri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Investigation of the Effect of Volume Fraction of Martensite and Different Tempering Conditions on the Microstructure and Mechanical Properties of St52 Dual-Phase Steel Used in the Automotive Industry
  M Shahverdi B Karbakhsh Ravari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Effects of Welding Cycles on Microstructural Characteristics and Mechanical Properties of SAF 2507 Super Duplex Stainless Steel
  M. A. Beheshty E. H. Dehkordi K. Zarrin Naghsh M. R. B. Marnany
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - The Effect of Cooling Rate on the Microstructure and Mechanical Properties of the Plastic Injection Molds
  Z. S Seyedraoufi M Samiee F Abdi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Dry and Wet Abrasive Conditions of Fe-C-B Wear Resistance Hardfacing Alloy on Mild Steel
  M. Mohammadikhah
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Evaluation of Performance of Resistance Spot Welded Joints with Different Parameters in Advanced High Strength TRIP Steel
  I. Hajiannia R. Ashiri M. R. Pakmanesh M. Shamanian M. Atapour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Improvement of Microstructure and Mechanical Properties of Manganese Steels by Adding Boron Alloying Element
  N. Arab
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Investigation of the In Situ Ceramic Particles (TiCN, TiC) Composite Cladding on the Abrasive Wear Resistance of the Steel Substrate
  M. Mohammadikhah A. Hadizadeh S. Mehrabeian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - Comparison of Ultrasonic and Thermal Stress Relief Treatments of GTAW Welded 316L Stainless Steel Pipes on Residual Stress an Stress Corrosion Cracking(SCC)
  N Arab
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Effects of Shielding Gas on the Depth, Width and Hardness of 17-4PH Stainless Steel during TIG Welding
  S, M Hosseini Farzaneh M Belbasi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Effects of Shielding Gas on the Mechanical and Microstructural Properties of 409L Ferritic Stainless Steels during Gas Metal Arc Welding
  A. Feghhi A. Emamikhah Y. Bayat Asl
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Study of Fatigue Behavior and Microstructure of 1.6582 Steel Joint by Resistance Butt Welding
  O Ashkani H .M Semnani H Sabet M .R Tavighi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Weldability of Dissimilar Joint of AISI 304 to CK45 by GTAW Method
  A. Taherkhani Y. Shajari K. Mirzavand A. Mellatkhah Z. S. Seyedraoufi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - Thermo-Elastic and Time-Dependent Creep Evolution Behaviour of Ferritic Steel Rotating Disks using Theta Projection Concept
  H. Daghigh V. Daghigh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - Investigating the Performance of Coated Carbide Insert in Hard Steel Helical Milling
  Navid Molla Ramezani Behnam Davoodi Mojtaba Rezaee Hajideh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Experimental Study on Surface Roughness and Flatness in Lapping of AISI 52100 Steel
  Masoud Farahnakian H. ُُShahrajabian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - The Effect of Focal Distance and Type of Auxiliary Gas on Cut Width in CO2 Laser Cutting of Stainless and Mild Steel Sheets
  Hossein Taheri Hamid Zarepour Firouzabadi Majid Hashemzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Investigating the Effect of Manganese Content on the Properties of High Manganese Austenitic Steels
  Seyyed Amin Torabi Kamran Amini Masab Naseri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Steady State Creep Characteristics of a Ferritic Steel at Elevated Temperature: An Experimental and Numerical Study
  Roozbeh Alipour Ali Farokhi Nejad Hamid Nilsaz Dezfouli
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - Effect of the Number of Welding Passes on the Microstructure and Wear Behavior of St52 Plain Carbon Steel Coated with a High Chromium-Carbon Electrode
  Mohsen Barmaki Kamran Amini Farhad Gharavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Investigation of Compressive Stresses of Stainless Steel 316L Diamond Lattice Structures Under the Effect of Spherical Connections Produced by SLM Additive Manufacturing
  Behnam Ahmadi Roozbahani AliAkbar Lotfi Neyestanak
  10.30486/ADMT.2024.1966579.1377
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - Analysis of Material Flow and Phase Transformation in Friction Hydro-Pillar Processing of 1045 Steel
  Moosa Sajed S. M. Hossein Seyedkashi
  10.30495/admt.2020.1900258.1198
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Hole-flanging of 2205 Dual-Phase Steel using Incremental Forming Process
  Amir H. Roohi Seyed Jalal Hashemi
  10.30495/admt.2021.1895361.1179
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - Feed Stock Fabrication of AISI 4605 Steel for Fused Deposition Modeling and Sintering and Designing of Its Extruder Mechanism
  Amir Rahimi Jamal Zamani
  10.30486/admt.2023.1961907.1358
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - The Moderating Effect of Organizational Commitment on the Relationship between Employees' Perceptions of Workplace Spirituality and Spiritual Intelligence in Isfahan Steel Company
  maryam yazdani Akbar Etebarian Mehdi Abzari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - The Effect of Participative Leadership on Perceived Job Security among Employees of Irik Steel Company: Mediating Role of Psychological Healthy Workplace
  Nazila Forouhan Ali Mehdad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - Relationship between organization constraints with counterproductive behavior of Isfahan's Mobarakeh Steel company employees considering moderator role of negative affect
  Narges Sadat Mortazavi hamidreza oreyzi
  10.30486/jsrp.2020.1882544.2140
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - The Effect of Hydro Ethanolic Seeds Extract of Neem(Azadirachta indica) and Bakain (Melia azedarach) to the Number of Trypanosoma evansi Steel in Liver of Mice
  shahrzad nassiri semnani nastaran Ghasempour
  0000-0002-7481-1784
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Experimental and Numerical Investigation of the Impact of a Blunt Projectile with a Perforated Plate
  M Farahmand Kh Vahedi A Naddaf Oskouei R Hosseini
  10.22034/jsm.2020.1897805.1580
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - Simulation of Residual Stress and Distortion in Welded Carbon Steel Pipe by Considering Solid-State Phase Transformation
  M. R Jahanban Saeed  Feli
  https://doi.org/10.60664/jsm.2024.3031772
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - Propose a New Model for Prediction of the Impact Wear Using an Experimental Method
  M Akhondizadeh M Fooladi Mahani M Rezaeizadeh S.H Mansouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  49 - Energy-Based Prediction of Low-Cycle Fatigue Life of CK45 Steel and SS316 Stainless Steel
  M Shariati H Mehrabi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  50 - Fatigue Life of Graphite Powder Mixing Electrical Discharge Machining AISI D2 Tool Steel
  A Al-Khazraji S.A Amin S.M Ali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  51 - A Cohesive Zone Model for Crack Growth Simulation in AISI 304 Steel
  F Javidrad M Mashayekhy
• Open Access Article
  • Abstract Page
  • Full-Text
  
  52 - Shape- Dependent Term Investigation of Khan- Liu Yield/ Fracture Criterion as a Function of Plastic Strain for Anisotropic Metals
  F Farhadzadeh M Tajdari M Salmani Tehrani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  53 - Non-Axisymmetric Time-Dependent Creep Analysis in a Thick-Walled Cylinder Due to the Thermo-mechanical loading
  M Moradi A Loghman
• Open Access Article
  • Abstract Page
  • Full-Text
  
  54 - Modeling Energy and Steel Price Volatility and Experimental Test of Inter-Market Volatility Spillover: A Multivariate Study Using VECM and Familty GARCH Models
  Seyed Abdolhamid Bahreini Hossein Badiei Faegh Ahmadi Jahanbakhsh Asadnia
  10.22034/amfa.2022.1932695.1605
• Open Access Article
  • Abstract Page
  • Full-Text
  
  55 - Comparative study of Female Character in Works by Fahimeh Rahimi and Daniel Steele Case study: “Window” and “Dawn of Love”
  Shorangiz Mortazavi Bigan Zahirinav Ramin Moharami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  56 - Identification and Prioritization of Factors Affecting Financing Chain Management (FSCM) Assessment Using a Mixed Approach in Isfahan Steel Industry
  farhad farhadi Ali Faez
• Open Access Article
  • Abstract Page
  • Full-Text
  
  57 - Criteria identification and ranking of sustainable suppliers in the supply chain of Isfahan Steel Company using thematic analysis and MARCOS method
  Farzad Tajmiri Rostami farhad farhadi
  10.30495/imj.2022.1944914.1720
• Open Access Article
  • Abstract Page
  • Full-Text
  
  58 - Model Professional Ethics to Improve Labor Relations between Staff (Case study: Mobarakeh Steel Company)
  Mohammad Ali Nadi Nozahtolazaman Moshfeghi Freshteh Salehi Mobarakeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  59 - Risk Assessment and Ranking in Supply Chain Using Taxonomy Method (Case study: Esfahan Steel Company)
  Mohammad Hayati Mohammad Ataie Amir Fardin
• Open Access Article
  • Abstract Page
  • Full-Text
  
  60 - Investigation of increasing surface hardness of 316L stainless steel using amorphous aluminum phosphate coating
  tara bazdar Abdolmajid Eslami ahmad monshi Fatemehsadat Sayyedan Alireza Abbasloo
• Open Access Article
  • Abstract Page
  • Full-Text
  
  61 - Evaluation of hot crack sensitivity and mechanical properties of ER310 welding metal in 304 stainless steel welding joints by applying electromagnetic vibration
  mohammad amin ghadam dezfouli reza dehmolaei seyed reza alavi zaree
• Open Access Article
  • Abstract Page
  • Full-Text
  
  62 - Investigation of corrosion behaviour of X70 microaloy steel in acidic environment in one molar sulfuric acid solution in the presence of benzomidazole and methyl benzomidazole
  مهدی بروجردنیا Mohammad Yazdizadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  63 - Investigation of Imidazole-Based corrosion inhibitor (PL-464) and corrosion behavior of X65 steel in Hydrochloric Acid
  mehdi borougerdnia Abbas Rajabi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  64 - The Effect of Nozzle Diameter and Water Pressure On Cutting CK45 Steel Quality in Water Jet Process
  Unes Anamoradi Mehrdad Ozv Aminian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  65 - Experimental study on the influence of SiO2 nano-fluid on machining force in turning of AISI 4340 steel
  Mohsen Khajehzadeh Ghorbanali Momen
• Open Access Article
  • Abstract Page
  • Full-Text
  
  66 - Experimental investigation on the effect of resistance projection welding parameters on weld joint torque strength of nut to sheet
  Nasrollah Bani mostafa Arab Amir Alinaghizadeh Ali Dehghani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  67 - Simulation of clearance effect on LDR in stainless steel deep drawing
  Ali Fathi Jokandan Mehrdad Ozve Aminian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  68 - Risks Identification & Analysis in Enterprise Resource Planning (ERP) systems in upstream steel industries
  Fatemeh Abbasi Jalal haghighat Monfared Jamshid Edalatian Shahriary
• Open Access Article
  • Abstract Page
  • Full-Text
  
  69 - Optimization ELM neural network in prediction problem: case study forecasting demand steel in Iran
  Jalal Rezaeenour Mansoureh Yari eili Esmaiel roozbahani Mohammad hossein Roozbahani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  70 - Investigation of the Progressive Collapse Potential in Steel Buildings with Composite Floor System.
  Pouya Kaafi Gholamreza Ghodrati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  71 - Design Approach of Bolts and Sandwiching Steel Plates in Hybrid-Sandwiching Systems Based on FEM
  Alireza Zaferani Pasha Javadi Parham Memarzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  72 - NEW RCS Frame Connection in Structures
  Hasan Aghabarati K. Parhizkar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  73 - Comparison of plasticity and stiffness of steel shear walls with composite steel plate shear wall
  Leila Shahryari Mahdi Esfandiari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  74 - Evaluating Response Modification Factors of Concentrically Braced and Special Moment Steel Frames in Duplex Buildings
  Leila Kalani Sarokolayi Sirous Gholampour dehkordib Masoud Shafaghati sefidabc
• Open Access Article
  • Abstract Page
  • Full-Text
  
  75 - Effect of column-foundation connection stiffness on seismic performance of rocking steel braced frame
  Masoumeh Farshbaf Abdolreza S. Moghadam
• Open Access Article
  • Abstract Page
  • Full-Text
  
  76 - Effect of flower pattern on the curvature of high-strength steel pipe in roll forming
  M. Karimi Firouzjaei H. Moslemi Naeini B. Abbaszadeh M.M. Kasaei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  77 - The Impact of Corporate Social Responsibility on Innovative Performance with Considering the Mediating Role of Marketing Effectiveness: A Case Study of Khuzestan Steel Industries
  Hamed Charkhab Ghanbar Amirnejad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  78 - Electrochemical and Tribological Behaviour of Oxide Dispersion Strengthened Duplex Stainless Steel in Mine Water Environment
  oladayo olaniran
• Open Access Article
  • Abstract Page
  • Full-Text
  
  79 - Fabrication and Characterization of Nanostructure Functionally Graded Ni-P Electroless Coating
  Sayede Razieh Anvari Sayed Mahmoud Monirvaghefi Mohammad Hossein Enayati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  80 - Isothermal and cyclic oxidation behavior of AISI 430 ferritic stainless steel coated with titanium
  Saeed Keshavarz Morteza Zandrahimi Hadi Ebrahimifar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  81 - Characterization of SiO2-TiO2 Coatings on 316l Stainless Steel Substrates
  Manuel Gutierrez Martinez Lizangela Guerra Barbara Bermudez Reyes Roberto Cabriales Luis Reyes
• Open Access Article
  • Abstract Page
  • Full-Text
  
  82 - The Effect of Friction Stir Processing Speed Ratio on the Microstructure and Mechanical Properties of A 430 Ferritic Stainless Steel
  Ali Salemi Golezani S. M Arab Sh. Javadi Firooz Kargar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  83 - Evaluation of corrosion behaviour on Mn-Cr austenitic steels using 0.1 M HCl solution
  Arash Fattah-alhosseini B. Izadi M. Asadi Asadabad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  84 - Semiconducting properties of passive films formed on AISI 420 stainless steel in nitric acid solutions
  Arash Fattah-alhosseini Mohammad Mehdi Khalvan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  85 - The Weldability Evaluation of Dissimilar Welds of AISI 347 Stainless Steel to ASTM A335 Low Alloy Steel by Gastungesten Arc Welding
  Iman Hajiannia Morteza Shamanian Masoud Kasiri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  86 - Inhibitive Assessment of N-(8-bromo-3H-phenoxazin-3-ylidene)-N,N’-Dimethylaminium, as a Novel Corrosion Inhibitor for Mild Steel in 1.0 M HCl
  Mansoor Bozorg Taghi Shahrabi Farahani Ghodsi Mohammadi Ziarani Jaber Neshati Zahra Chaghazardi Parisa Gholamzadeh Fatemeh Ektefa
• Open Access Article
  • Abstract Page
  • Full-Text
  
  87 - Effect of Thermomechanical Processing on the Microstructure and Mechanical Properties of a Duplex Stainless Steel
  Maryam Mohammad Jafarpour Bitollah Eghbali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  88 - Dissimilar resistance spot welding of AISI 1075 eutectoid steel to AISI 201 stainless steel
  Mehdi Safari Hossein Mostaan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  89 - Structural characteristics and tribological properties of TiAlCr(Si)CN nanocomposite films coated on the SPK 1.2080 tool steel using PVD technique
  Mohammad Hassan Dadkhah Tehrani Abdolreza Jafari Tadi Yaghoub Yaghoubi Askarabad Majid Karimian Kamran Amini Mohammad Hossein Dadkhah Tehrani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  90 - Microstructure and Mechanical Properties of the Friction Welded Joint between X53CrMnNiN219 and X45CrSi93 Stainless Steel
  khalil gheisari Mohammad Reza Abasi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  91 - Investigation on High Temperature Wear Resistance of Cryotreated Hot Work Tool Steel
  Iman Ebrahimzadeh Farhad Gharavi کامران امینی zahra Ghorbani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  92 - Experimental Investigation on the dissimilar laser weld joints between Inconel 625 Superalloy and AISI 430 Ferritic Stainless Steel
  Hossein Mostaan Mahdi Rafiei Mohammad Emadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  93 - Investigation of Microstructure and Mechanical Properties of Ni-Cu-P Coatings Deposited by the Electroless Method
  Danial Davoodi Amir Hossein Emami Sayed Mahmoud Monir Vaghefi Mahdi Omidi Hamid Reza Bakhsheshi-Rad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  94 - The Effect of Reverse Pulse Plating and Lanthanum Addition in Plating Bath on Corrosion Resistance of Austenitic Steel in Chlorine Solution
  Leila Bakhtiari Abdolhamid Jafari Shahriyar Sharafi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  95 - Dissimilar DP780/DP980 Resistance Spot Welded joints: Microstructure, Mechanical Properties and Critical Diameter
  Bahman Valizadeh Mehdi Mansouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  96 - Effect of Post-Weld Intercritical Annealing on the Microstructure and Tensile Properties of a Gas Tungsten Arc Welded DP700 Steel
  Hamid Ashrafi Sayyed Erfan Aghili
• Open Access Article
  • Abstract Page
  • Full-Text
  
  97 - Evaluation of GMAW Welded Joints in A36 Low-Alloy Marine Steel Sheets: Tensile Test, Hardness, and Fatigue Properties
  Mohammad reza Maraki Masoud Mahmoodi Milad Khodaei Hadi Tagimalek
• Open Access Article
  • Abstract Page
  • Full-Text
  
  98 - Microstructural Evolutions and Mechanical Properties of Transient Liquid Phase Bonded WC-Co/St52 with BNi-2 Interlayer
  Hamed  Zeidabadinejad Mahdi Rafiei Iman  Ebrahimzadeh Mahdi  Omidi Farid  Naeimi
  10.71670/jmatpro.2024.981656
• Open Access Article
  • Abstract Page
  • Full-Text
  
  99 - An investigation on full annealing temperature and annealing twins’ Density in Fe-33Mn-3Si-2Al high-manganese steel
  Gh.R Razavi A Ansaripour H Monajatizadeh M.R Toroghinejad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  100 - Effect of Deposition Regime on Tribological Behavior of VK8Coating on 1.2344 Tool Steel Obtained by Electro Spark Method
  M Aghakhani A Shafyeib H Monajatizadea M. A Aghakhani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  101 - An investigation on metallurgical and mechanical properties of vacuum brazed Ti-6Al-4V to 316L stainless steel using Zr-based filler metal
  M.E Bajgholi R Soltani Tashi A.A Akbari Mousavi E Heshmat Dehkordi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  102 - Vacuum Brazing of Zirconium-Based Alloy and 321 Stainless Steel Using Titanium Based Filler Metal
  M.E Bajgholi E Heshmat Dehkordi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  103 - The effect of activating fluxes on 316L stainless steel weld joint characteristic in TIG welding using the Taguchi method
  E Ahmadi A.R Ebrahimi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  104 - Influence of Initial Microstructure on Hot Deformation Behavior of Duplex Stainless Steels
  M Pouyamanesh B Eghbali Gh. R Ebrahimi M Saadati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  105 - The Milling of Metalsthrough Adaptive Neuro-FuzzyInference System (ANFIS) for non-touch Measuring of the Temperature to Reduce Coolant
  Sara Kashisaz Zahra Basiri Paknafs Ahmad Riahi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  106 - Predicting the Influence of Electrical Discharge Machining (EDM) Parameters on the Finished Work Surface in CK45 Steel
  Esmaeil Jafari Ahmad Afsari Sina Abedpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  107 - Texture Evolution in Low Carbon Steel Fabricated by Multi-directional Forging of the Martensite Starting Structuree
  Mehdi Salari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  108 - Feasibility Investigation of Hydroforming of Dental Drill Body by FEM Simulation
  Mohammad Sajjad Mahdieh Mohammad Reza Esteki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  109 - Study the Percentage of Carbon and Ferrite in Layers of Steel (SA-516) by Strip Cladding with E316L
  Ahmad Afsari Dara Fazel Jafar Karimisharifabadi Vahid Mehrabi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  110 - An Electrochemical Investigation on the Effect of Heat-Stable Salts on the Corrosion Resistance of Carbon Steel in MDEA Solution
  Hojatollah Abnavi Esmaeil Jafari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  111 - Enhanced Microstructure and Mechanical Properties of A216 Steel by Friction Stir Processing
  Gholamreza Khalaj Gholamreza Ghaffari Bahram Abdolmaleki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  112 - Analytical, Experimental and Finite Element Investigation of Internal Pressure Effect in Hydroforming Process on Metallic Bellows Produced from Thin Wall Tube of Austenitic Stainless Steel Grade 316L
  Mehdi Arabbeigi Mehran Moradi Boozarjomehr Ghasemi Majid Sattar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  113 - Micro Machining of AISI 440C Stainless Steel using Magnetic Field and Magnetic Abrasive Particles
  Yahya Choopani Mohammad Reza Razfar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  114 - Machinability Improvement of 17-4PH Stainless Steel by Cryogenic Cooling
  Salman Khani Mohammad Razfar Masoud Farahnakyan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  115 - Effect of Cold Rolling sequence on the Texture Development and Magnetic Loss of Grain Oriented Electrical Steels
  Mehdi Salari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  116 - Experimental Study of the Cutting Parameters Effect on Hole Making Processes in Hardened Steel
  Navid Molla Ramezani Mojtaba Rezaei Hajideh Ali Shahmirzaloo
• Open Access Article
  • Abstract Page
  • Full-Text
  
  117 - Evaluation of the behavior of reinforced concrete (RC) beams reinforced with FRP bars containing ground granulated blast furnace slag (GGBFS)
  Arsalan Usefi pour Leila Hosseinzade Seyedeh Mahdieh Miralami yousof zandi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  118 - Friction damper optimization based on parallel sensitivity analysis For self-centering concrete walls with gravity columns
  mohsen izadinia mahdi ravanbakhshian Hosein Tajmir Mohammadhasan Meisami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  119 - Study on behavior of Concrete Filled Double Skin Steel Tubular Under Torsion and Cyclic Loading
  Ahmad maleki reza khalili
• Open Access Article
  • Abstract Page
  • Full-Text
  
  120 - Investigating of the Performance of Different Diagonal Brace Patterns in Rehabilitation Lightweight Steel Frame (LSF)
  mohamad reza shokrzadeh armin aziminejhad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  121 - Study on Behavior of Infilled Composite Steel Frame under Lateral Loading
  Hasan PoorMohammad seyedali tabatabayi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  122 - Investigating the effects of using a rocking motion system on the bending seismic Behavior of special steel frames
  Ali Parvari S.Behnam Beheshti
  10.30495/civil.2023.701046
• Open Access Article
  • Abstract Page
  • Full-Text
  
  123 - Comparison of Progressive Collapse in Moment Connections with Low-strength Steel
  ahmad karimian arastoo armaghani Alaeddin Behravesh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  124 - Reviewing Optimal Percent of Steel Fibers and their Effects on Lightweight Concrete Durability
  Ali Ghods sanaz chahkandi Homayon navayi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  125 - Investigation on the Behavior of Composite Steel Plate Shear Walls with CFT Columns under Blast Load
  Hossein Parvini Sani Shahram Mohammadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  126 - Numerical and Experimental Investigation of Multi-Perforated Steel Shear Wall Under Cyclic Loading
  Ali sahebjam Hossein shokati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  127 - The effect of Number and Position of Braced Frames on Failure Distribution and Column Behavior of the Dual Steel Structural System (MRF and EBF)
  Alireza Faroughi Sajjad Mohammadi Abd-ol-Reza Sarvghad Moghaddam
• Open Access Article
  • Abstract Page
  • Full-Text
  
  128 - Numerical Study of a Reinforced Concrete Frame with Low Yield Point Infill Plates
  aman hassanzade rahimabadi yahya nasiraa ali ghamari
  10.30495/civil.2022.690629
• Open Access Article
  • Abstract Page
  • Full-Text
  
  129 - Investigation of rheological and mechanical properties of two-component and three-component mortars containing microsilica and slag
  Seyed Fathollah Sajedi wilbert karamian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  130 - The investigation of the effects of using rocking systems on the seismic retrofit of high-rise steel building
  Ali Parvari rohallah hasanvand saman mansouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  131 - Evaluation of the Simultaneous Application of Vertical and Horizontal Mass Isolation Techniques in the Moment Steel Frame Structures
  Noosheen Ghorbani Farshid Fathi
  10.30495/civil.2021.684725
• Open Access Article
  • Abstract Page
  • Full-Text
  
  132 - None-platinum electrode catalysts and membranes for highly efficient and inexpensive H2 production in microbial electrolysis cells (MECs): A review
  Abudukeremu Kadier Washington Logroño Pankaj Kumar Rai Mohd Sahaid Kalil Azah Mohamed Hassimi Abu Hasan Aidil Abdul Hamid
• Open Access Article
  • Abstract Page
  • Full-Text
  
  133 - Steel Supply Chain Complexity and Resilience Assessment: Interactive Network Mapping, Graph Theory, and Agent-Based Simulation
  Mohammad Hossein Sadat Hosseini Khajouei Nazanin Pilevari Reza Radfar Ali Mohtashami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  134 - Multi-objective optimization in WEDM of D3 tool steel using integrated approach of Taguchi method & Grey relational analysis
  Anand S. Shivade Vasudev D. Shinde
• Open Access Article
  • Abstract Page
  • Full-Text
  
  135 - Experimental investigation of Carbon, Glass and Steel fibers effect on failure strength and slump of standard concrete samples
  Sohrab hosseini kheirabad Ehsan Kazeminezhad Soroush Safakhah
  10.1007/ijase.2023.698539
• Open Access Article
  • Abstract Page
  • Full-Text
  
  136 - Numerical study of the progressive failure of high-rise steel construction with composite roof system under blast load effect
  Alireza Faroughi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  137 - Seismic Assessment And Strengthening Of An Existing Steel Bridge In Portugal
  Catarina Fernandes Humberto Varum
• Open Access Article
  • Abstract Page
  • Full-Text
  
  138 - Ductility-based Seismic Design Of Steel Plate Shear Walls: Practical Application Using Standard Sections
  Mayank K. Gupta Swapnil B. Kharmale Siddhartha Ghosh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  139 - Stability Analysis Of 3-d Conventional Pallet Rack Structures With Semi-rigid Connections
  Kamal M. Bajoria Keshav K. Sangle Rajshekar S. Talicotti
• Open Access Article
  • Abstract Page
  • Full-Text
  
  140 - Ranking the financial performance of Tuka Foolad companies based on organizational DNA behavior using the ELECTRE technique
  Alireza Shirvani sara etemadi Zahra Alipour Darvish
• Open Access Article
  • Abstract Page
  • Full-Text
  
  141 - Metoclopramide: a new and effective inhibitor for corrosion inhibition of mild steel in 0.5 M phosphoric acid solution
  مهدی شهیدی زندی زهرا گلشنی محمدجواد بهرامی سیدمحمدعلی حسینی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  142 - Study of two organic compounds containing nitro functional group as temporary protection of steel corrosion
  فریبرز اتابکی مهران رادور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  143 - Analyzing the Backward and Forward linkage of the Khuzestan Steel Company's Products with Inside the Company and the national economy with the approach of the enterprise Input-Output table
  Yaghoub Andayesh ziba Saeidi Nashlil
  10.30495/ecomag.2024.1999927.1087
• Open Access Article
  • Abstract Page
  • Full-Text
  
  144 - Environmental effluent indicators of Isfahan Steel Company
  B. Sadri Lonbani R. Mogouei M. Kashefialasl
• Open Access Article
  • Abstract Page
  • Full-Text
  
  145 - افزایش عمر فورج گرم با استفاده از روش های مختلف
  صادق جعفرپور مسعود رضایی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  146 - خصوصیات فیلم اکسید تشکیل شده روی فولاد Ck45 با استفاده از روش اکسیداسیون الکترولیتی پلاسما
  S. Abuali Galedari م. موسوی خوئی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  147 - استفاده از تجزیه و تحلیل Gray Relational و تکنیک Taguchi در حل مشکلات چند هدفه برای چرخش عملکرد فولاد ضد زنگ آستنیتی
  م. آزادی مقدم ف. کلاهان م. حسینی دوغ آبادی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  148 - An Analysis of prices of energy carriers on the steel industry in Iran
  Mohammad Ali Khatib Roya Seifipour Saeid Rahimi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  149 - Identifying and Ranking Business and Information Technology Alignment Challenges: A Strategy for Strategic Alignment (Case Study: Southern Steel Company)
  Faramarz Khaleghi Mohammad Ebrahim Mohammadpoor Zarandi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  150 - Risk Assessment in Enterprise Resource Planning (ERP) systems implementation in upstream steel industries
  Fatemeh Abbasi Jalal Haghighat Monfared Jamshid Edalatian Shahryari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  151 - The Investigation of Sensitization Effect on the Corrosion Behavior of SAF 2205 Duplex SS at Transpassive Region
  خشایار مرشدبهبهانی پوریا نجفی سیار محمود پاکشیر
• Open Access Article
  • Abstract Page
  • Full-Text
  
  152 - Investigation of the Tempering Treatment on the Mechanical Propertiesof 13%Cr Super Martensitic Stainless Steel
  Saeeid Jbarzare Iman Kheirollahi-Hoseinabadi S. M Sehri Rasol Ghasemi محمد Kuwaiti ابراهیم Shokraneh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  153 - Transient liquid phase (TLP) bonding of AISI321 stainless steel using MBF-20 commercial interlayer
  محمد علی میثاقی رضا بختیاری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  154 - Investigation of high temperature wear properties of NiCrBSi and satellite coatings deposited on hot work tool steel DIN-1.2344
  مصطفی طهری مجتبی اسماعیلیان Behrooz Shahriari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  155 - Investigation the causes of corrosion and failure of the submerged entry nozzle for continuous casting of steel
  رحمت الله عمادی آرش حاجی پور حسین عمادی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  156 - Effects of size and type of coating of iron powders and copper additive on the properties of hollow steel spheres
  Hamid Sazegaran علیرضا کیانی رشید
• Open Access Article
  • Abstract Page
  • Full-Text
  
  157 - Investigation of microstructure and mechanical properties of AISI304L Stainless Steel to ASTMA514 Steel joint by Gas Tungsten Arc Welding
  موسی توکلی عباس سعادت محمدرضا خانزاده قره شیران
• Open Access Article
  • Abstract Page
  • Full-Text
  
  158 - Study the microstructure and hardness of FSW of API 70 steel at the presence of TiO2 particles
  Rasoul Pouriamanesh KAMRAN Dehghani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  159 - Dissimilar welding of Incoloy 825 to AISI 316L austenitic stainless steel and evaluation of Microstructure and Mechanical properties
  مهدی باباجانی مرتضی شمعانیان مسعود کثیری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  160 - Investigation the Effect of Microstructure and Crystallographic Texture on the Hydrogen Induced Cracking Resistance of HSLA Steel
  shahram abbasi mohammad esmailian Shahrokh Ahangarani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  161 - Corrosion Inhibition of Polyethylene Glycol on Carbon Steel in Sulfuric Acid Solutions and its Synergism with Schiff Base
  sina jahadi mojtaba nasr esfahani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  162 - Theoretical and experimental study of Imidazolium Ionic Liquid Effect on the Corrosion Inhibition of 316-Stainless Steel, Using Electrochemical Test Methods and Quantum Mechanics Theories
  Reza Safari ALI EHSANI Hamid Ebrahimi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  163 - The effect of surface roughness and the current on the strength of stud welded pin
  محمد خدائی جواد مختاری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  164 - ارزیابی خواص مکانیکی جوش های غیر مشابه فولاد زنگ نزن AISI 347 به فولاد کم آلیاژ ASTM A335
  iman HAJIANNIA
• Open Access Article
  • Abstract Page
  • Full-Text
  
  165 - Corrosion monitoring of sulfuric acid tank under anodic protection by electrochemical noise
  احسان صائب نوری Mousa Mohammadian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  166 - The Influence of Sensitization Heat-treatment and Surface Finishing on the Properties of the SAF 2205 Duplex SS Passive Layer
  Khashayar Morshed-Behbahani Mahmoud Pakshir Pooria Najafisayar Nika Zakerin
• Open Access Article
  • Abstract Page
  • Full-Text
  
  167 - Investigating the oxidation and electrical behavior of AISI 304 steel coated with cobalt for the application of solid oxide fuel cell
  Mohammad Reza Ashorzadeh Morteza Zandrahimi Hadi Ebrahimifar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  168 - Phase, microstructure characterization and hardening efficiency of SKS3 tool steel laser surface hardened by a high-power diode laser
  Amirsalar Dehghani Amirreza Farnia Mohammad Javad Torkamany
• Open Access Article
  • Abstract Page
  • Full-Text
  
  169 - Effects of Heat Treatment on the Microstructure, Mechanical Properties and Corrosion Behavior of 2209 Duplex Stainless Steel Parts Manufactured By Wire Arc Additive Manufacturing Process
  Ali A. Molazadeh Kashkouie Mahmood Sharifitabar Mahdi Shafiee Afarani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  170 - Evolution of the Microstructure and Mechanical Properties of Friction Stir Welded Ferrite-Martensite DP700 Dual Phase Steel
  Mahdi Mahmoudiniya Amir Hossein Kokabi Massoud goodarzi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  171 - An Investigation of the Simultaneous Effect of Shot Peening and Baking on the Tensile Behavior of 50crv4 Alloy Steel
  Malihe Ghasemzade Hamid Nazemi
  10.30495/apme.2021.1926826.2044
• Open Access Article
  • Abstract Page
  • Full-Text
  
  172 - Investigation of the Intergranular Corrosion Behavior of UNS S42000 Martensitic Stainless Steels Using Potentiodynamic Electrochemical Impedance Spectroscopy
  Khashayar Morshed-Behbahani Pooria Najafisayar Mahmoud Pakshir Nika Zakerin
  10.30495/apme.2021.1908777.2012
• Open Access Article
  • Abstract Page
  • Full-Text
  
  173 - Correlation of Microstructure with Mechanical Behavior of HSLA-100 Weld Metal Produced By GTAW Method
  Mahyar Darivandpour Reza Dehmolaei Khalil Ranjbar
  10.30495/apme.2021.1910558.2016
• Open Access Article
  • Abstract Page
  • Full-Text
  
  174 - Effect of Protective Behaviour of Biofilm Formed By the Anaerobic Sulfate-Reducing Bacteria on the Corrosion Resistance of the API X42 Microalloyed Steel
  mojtaba Baghalzadeh Khalilollah Gheisari Hossien Motamedi
  10.30495/apme.2021.1927007.2045
• Open Access Article
  • Abstract Page
  • Full-Text
  
  175 - Finite element simulation of the effect of the second pulse current on temperature distribution and nugget size in resistance spot welding of TRIP1100 steel
  Hamid Ashrafi Iman Hajiannia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  176 - Comparison of the effect of thermal cycles on phase transformation and structure in the heat-affected zone of pipeline steel welding
  Gholamreza Khalaj
• Open Access Article
  • Abstract Page
  • Full-Text
  
  177 - بررسی تاثیر عملیات حرارتی بر خواص ریزساختاری ورق سه لایه آلومینیوم منیزیم- آلومینیوم خالص- فولاد زنگ نزن
  داوود میراحمدی ابوالفضل غلام زاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  178 - ساخت کالکتور خورشیدی متمرکز کننده سهموی خطی و پیش بینی عملکرد آن
  محمود تاجی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  179 - بهینه سازی پارامترهای جوشکاری قوس تنگستن گاز پالسی در اتصال غیرمشابه مونل۴۰۰ و فولاد زنگ نزن آستنیتیL۳۱۶
  علی خلیلی مسعود کثیری عسگرانی مرتضی شمعانیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  180 - بهینه سازی پارامترهای جوشکاری فولاد کم‌کربن EN 10130 به روش جوشکاری اصطکاکی-اغتشاشی
  اکبر علیمحمدی مسعود کثیری مسعود افرند حسین نوروزی فروشانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  181 - The Effect of Heat Treatment on Springing of AISI301
  Majid Karimian Ehsan Nourouzi Esfahani Mohammad Bagherboom
• Open Access Article
  • Abstract Page
  • Full-Text
  
  182 - Investigating on process variables effect of AISI 304 stainless steel machining using minimum quantity lubricant on cutting force
  Mohammad Ali Safataj Sayed Ehsan Mirmohammadsadeghi Reza Abedinzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  183 - Specifying the allowed remained bottom thickness after milling in CNG steel cylinders by FEM analysis and experimentation
  Mojtaba Esmailian Mohsen Shahmoradi Kamran Karimzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  184 - بررسی عددی و تجربی برگشت فنری در خمش U شکل ورق‌هایی از جنس فولاد DP600
  محمد شفیعی علویجه حسین ترابیان حسین امیرآبادی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  185 - استفاده از روش غیرمخرب فراصوتی برای پیش‌بینی خواص مکانیکی فولاد AISI 4140
  محمد حمیدنیا فرهنگ هنرور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  186 - بررسی اثرات ماشینکاری EDM برریزساختار سطح درفولاد CK45
  سینا عابدپور اسماعیل جعفری احمد افسری سعید حدیدی مود
• Open Access Article
  • Abstract Page
  • Full-Text
  
  187 - Developing a strategic model based on structural equation modeling and fuzzy logic approach in supplier selection
  Mohammad menatian yahya chaghoei mohamad hosan adibisadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  188 - Evaluation of the Behavior of Reinforced Concrete (RC) Beams Reinforced with FRP Bars Containing Ground Granulated Blast Furnace Slag (GGBFS)
  Arsalan Usefi pour Leila Hosseinzade Seyedeh Mahdieh Miralami yousof zandi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  189 - Effect of Laser Parameters on Geometry of Cladded Stellite 6 on 35CrMo Steel Substrate and its Characterization
  Bahman  Mansouri Mahdi Rafiei Iman Ebrahimzadeh Farid  Naeimi Masoud  Barekat
  10.71670/jmatpro.2024.1115395
• Open Access Article
  • Abstract Page
  • Full-Text
  
  190 - Investigation the weld quality characterizations and temperature field in laser welding of dissimilar Nickle-base alloy Inconel 600 and duplex stainless steel
  Ahmad Soleimani Mohammad Akbari Arash Karimipour Amir Homayoun Meghdadi Reza Nosouhi
  10.71939/jsme.2024.1119530
• Open Access Article
  • Abstract Page
  • Full-Text
  
  191 - Effect of Bonding Time on Microstructure and Mechanical Properties of Transient Liquid Phase Bonding Between WC-Co/St52
  Hamed Zeidabadinejad Mahdi Rafiei Iman Ebrahimzadeh Mahdi Omidi Farid Naeimi
  10.71670/jmatpro.2024.1121074
• Open Access Article
  • Abstract Page
  • Full-Text
  
  192 - Investigation of Steel Slabs Marker Robotic Arm Control Parameters in Noise and Disturbance Absence/Presence
  Mohammad Sajjad Mahdieh
  10.71762/2967-8504
• Open Access Article
  • Abstract Page
  • Full-Text
  
  193 - Seismic Optimization of Steel Moment Resisting Frame Using Uniform Deformation Algorithm
  Amir hassan Alizadeh Mehdi Rahimi Asl
• Open Access Article
  • Abstract Page
  • Full-Text
  
  194 - An Investigation on the Metal Injection through the Producing of MIM-ed Low-Alloy Steel
  S. Rezaei A. Askari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  195 - Evaluation of two types of tractor steel lugged wheel in paddy soil preparation
  Ali Reshadsedghi Masoud Zabolestani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  196 - Multiple Simultaneous Damage Detection in large-span bridges
  Leila Hosseinzadeh Behnam Babaie
• Open Access Article
  • Abstract Page
  • Full-Text
  
  197 - Failure Mechanism Analysis of the Steel Beam to Reinforced Concrete Column Connection with through-plate and Buckling-Restrained Steel Plates
  Omid Parvizi Ahmad maleki mohammadali lotfollahi yaghin احمد ملکی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  198 - Presenting an interactive marketing model based on causal, contextual and intervening variables in the steel industry
  Hossein  Vahidi Iry Sofla Mahmoud  Ahmadi Sharif Mohammad  Nasrolahnia peyman Ghafari Ashtiani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  199 - The study of Oxidation Behavior of AISI 439 Steel at the Presence of Manganese Oxides for the Application in Solid Oxide Fuel Cells
  Mohammad Bagher Limooei Hadi Ebrahimifar Shabnam Hosseini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  200 - Effect of temperature and time, the interlayer on microstructure and mechanical properties of Transient Liquid Phase (TLP) bonding of AISI321 stainless steel
  M.A Misaghi رضا Bakhtiari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  201 - An investigation on the effects of interpass temperature on corrosion behavior of weld metal of Hadfield high carbon steel weld joint
  مسعود Sabzi زهره Balak
• Open Access Article
  • Abstract Page
  • Full-Text
  
  202 - Investigation on Effect of Aluminum on the Corrosion Resistance of Hadfield Austenitic Manganese Steel
  مسعود Sabzi صادق Moeni far ابراهیم Najafi Birgani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  203 - Modelling of austenite decomposition transformation of heat affected zone in API-X65 and X70 pipeline steels
  Gholamreza Khalaj
• Open Access Article
  • Abstract Page
  • Full-Text
  
  204 - Effect Of Quenching and Tempering Temperature on the Fracture Quality of GS-45CrNiMo4-2 Steel, Through the Quench-Temper Heat Treatment Cycle
  Hamed Eskandari Mansoor Farzam Omid Abbasi Larki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  205 - Evaluation of Metoral pill as an effective and novel inhibitor for corrosion of mild steel in acidic media
  Fatemeh Mohammadi Nezhad Mehdi Shahidi Zandi Seyyed Mohammad Ali Hosseini Mohammad Javad Bahrami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  206 - improvement of mechanical properties and hot cracking susceptibility of 304 stainless steel weld joints with the simultaneous electromagnetic vibration application
  mohammadamin ghadamdezfuli Seyed Reza Alavi Zaree Reza Dehmolaei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  207 - Comparison of Microstructure and Mechanical Properties of Mo40 Steel in Ferrite-Martensite dual phase and quenched tempered condition
  mohsen kashefi seyyed sadegh GHASEMI BANADKOUKI
• Open Access Article
  • Abstract Page
  • Full-Text
  
  208 - Investigation of structure and tribological behavior of nanostructured DLC coating, deposited by PACVD and Arc-PVD processes
  عیسی Karanian رامین Nayebzade مهدی Gholampour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  209 - Influence of filler metal on the microstructure of dissimilar welds between UNS S32205 duplex stainless steel and ASTM A517 Quench and tempered steel
  A.R Forough مرتضی Shamanian مسعود Kasiri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  210 - The Effect of Pulsed Laser Parameters on Surface Compositing of H13-TiC
  مریم Kazemi Sh Kheirandish حسن Saghafiyan علی Dadoo
• Open Access Article
  • Abstract Page
  • Full-Text
  
  211 - THE EFFECT OF MICROSTRUCTURAL CHANGES ON THE CORROSION PROPERTIES OF 310S AUSTENITIC STAINLESS STEEL AFTER THERMOMECHANICAL TREATMENT
  Reza Bolouk heidari Mostafa Eskandari Mahdi Yeganeh
  10.30495/jnm.2022.30360.1956
• Open Access Article
  • Abstract Page
  • Full-Text
  
  212 - Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions
  Abbas Yazdizade Khalili sadegh ghasemi banadkouki Hamid Reza Karimi Zarchi masoud mosallaee pour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  213 - Superior improvement of tensile properties in a low alloy medium silicon DIN 1.5025 steel under single step quenching and partitioning heat treatment compared to fully martensitic conditions
  Shima Pashangeh sadegh ghasemi banadkouki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  214 - Effect of MoS2 Addition on High Temperature Wear Behavior of NiCrBSi Coating Produced by Thermal Spraying
  Mohammad Razazi Boroujeni Hind Khalaf Shayea Al Fadhli Farhad Azimifar
  10.30495/jnm.2024.32822.2020
• Open Access Article
  • Abstract Page
  • Full-Text
  
  215 - Investigation of effective parameters on dissimilar infrared brazing for Ti-6Al-4Vv and SS316 L by Ag Base filler metal
  Esmaeil Ganjeh Mohammad Ghasemzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  216 - Effect of severe plastic deformation process on mechanical properties of 1.7225 Steel
  behrouz mahdikhani Mehrdad Javadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  217 - Study on microstructure and mechanical properties of API X70 steel at various hot rolling conditions
  محسن ریحانیان Mehdi Rezaei Mostafa Eskandari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  218 - Investigation of microstructure and mechanical properties of welding metal of A516-Gr70 steel in the presence of TiO2 by SAW method
  Reza Amini Najafabadi Abbas Asadi
  10.30495/jnm.2022.27507.1912
• Open Access Article
  • Abstract Page
  • Full-Text
  
  219 - Effect of multi-pass friction stir processing on microstructure and mechanical properties of cast A216 alloy
  Gholamreza Khalaj Gholamreza Ghaffari Bahram Abdolmaleki
  10.30495/jnm.2022.30295.1955
• Open Access Article
  • Abstract Page
  • Full-Text
  
  220 - Investigating the Effect of Intercritical Annealing Heat Treatment on the Quenching and Partitioning of Ferrite-Bainite-Martensite Microphases in High-Silicon Low-Alloy DIN 1.5025 Steel
  Shima Pashangeh Soheil Afkhami Seyyed Sadegh Ghasemi Banadkouki
  10.30495/jnm.2024.33076.2033
• Open Access Article
  • Abstract Page
  • Full-Text
  
  221 - Determination Optimum Boron Quantity Effect on Low Temperature Impact Energy of Mild Steel Weld Metal that Fabricated by Submerge Arc Welding (SAW)
  Sh Shafinia Sh Mirdamadi حامد Sabet S. R Amirabadizade
• Open Access Article
  • Abstract Page
  • Full-Text
  
  222 - Investigation on the Effects of Using Salt Water Bathroom Quenching on the Corrosion Behavior of Hadfield Manganese Steel
  M. Sabzi S. Moenifar E. Najafi Birgani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  223 - Determination of the Degree of Sensitization in AISI 316 Stainless Steel by the Electrochemical Impedance Technique
  KH. M.B M. پاکشیر
• Open Access Article
  • Abstract Page
  • Full-Text
  
  224 - Modeling the hot deformation flow curves of API X65 pipeline steel using the exponential law equation
  M. Rakhshkhorshid
• Open Access Article
  • Abstract Page
  • Full-Text
  
  225 - A Study on the Effect of Mechanical Activating of Plain Carbon Steel Surface on the Protection Properties of Applied Zinc Phosphate Coating and Paint Adhesion Improvement
  L. F.Y M. آزادبه
• Open Access Article
  • Abstract Page
  • Full-Text
  
  226 - Microstructure and Mechanical Properties of Plain Low Carbon Steel Processed by Integrated Extrusion and Equal Channel Angular Pressing (Ex-ECAP)
  مهدی Shaban Ghazani اکبر Vajd بشیر Mosadegh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  227 - Investigating the effect of banding on the impact resistance behavior of microalloy steel used in pipelines
  احمدرضا سلیمی حسین مناجاتی زاده داود آصفی امیر انصاری پور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  228 - The performance of self-assembled thin film of imidazole used in organic-inorganic hybrid coating on ‎corrosion inhibition of carbon steel in acidic solution
  A. Fazel M. Nasr-e Isfahani M. Zendeh Del
• Open Access Article
  • Abstract Page
  • Full-Text
  
  229 - An Investigation of Flow Accelerated(assisted) Erosion-Corrosion in High Pressure Economizer Tubes(HP-EC) of Boiler Unite 1 at Kerman Combined Cycle Power Plant
  A. احمدی E. جعفری M. GH
• Open Access Article
  • Abstract Page
  • Full-Text
  
  230 - Improvement in Mechanical Properties of Medical Stainless Steels by Using Liquid-Phase Sintering
  M. Javanbakht M. j. Hadianfard E. Salahinejad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  231 - Effect of Ultrasonic Impact Treatment on Fatigue Behavior of Steel Welded Pipes in Petrochemical Corrosive Environment
  M. Daavari S. A. SadoughVanini Gh. A. Ashouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  232 - Investigating the Effects of Heat Input on Corrosion Rate of Joint of Duplex Stainless Steel 2205 Weldments by GTAW Process
  M.A ترحم نژاد R. دهملائی S. معینی فر
• Open Access Article
  • Abstract Page
  • Full-Text
  
  233 - The effect of deep cryogenic treatment on the hardness and wear behavior of Din 1.2344 tool steel
  B. Mokarian Khozani K. Amini H. Ghayour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  234 - A Survey of Mechanism and Kinetic of Oxidation of Welding Lines in Austenitic Stainless Steel AISI321
  Sh. Soltaninzhad R. Ebrahimi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  235 - Fracture Resistance Improvement of Micro Alloy Steel Weld in Four Wire Submerged Arc Welding by applying One and Two Thermal Cycles
  M.S. Moeinifar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  236 - An Experimental and Simulational Investigation on Schiff-base Complex of Cobalt and Corresponding Ligand as Corrosion Inhibitor in Acidic Solution
  B. جعفری Z. نوری صفا
• Open Access Article
  • Abstract Page
  • Full-Text
  
  237 - Double Round Tube-Form Yielding Damper with Similar Behaviors in Tension and Compression for CBFs Buildings’ Structures
  صاحب پیرانی Heydar Dashti Naserabadi مرتضی جمشیدی Mahmood Hooseini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  238 - laboratory study of the effect of plate material of steel shear walls in precast concrete buildings
  jaber koopaeazadeh Farhad Behnamfar محمدرضا جواهری تفتی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  239 - Corrosion Study of A516 Grade 70 Steel in Sodium Aluminate Solution of Bayer Process Containing Sulfide and Determination of Sulfide by a Practical Method
  Mohammad Reza Ramazani Mohammad Hadi Givianrad Mohamad Saber Tehrani Parviz Abroomand Azar