Predicting the Influence of Electrical Discharge Machining (EDM) Parameters on the Finished Work Surface in CK45 Steel

Subject Areas :

Esmaeil Jafari ¹ , Ahmad Afsari ² , Sina Abedpour ³

1 - Department of Materials Science and Engineering, School of Engineering, Islamic Azad University, Shiraz
2 - Mechanical Engineering Dept., Shiraz Branch, Islamic Azad University, Shiraz, Iran
3 - Mechanical Engineering Dept., Shiraz Branch, Islamic Azad University, Shiraz, Iran

Received: 2020-02-02 Accepted : 2020-04-19 Published : 2020-02-01

Keywords:

References:

[1] Leptidis, S., Papageorgiou, D., Medrea, C. and Chicinaş, I. 2016. Failure analysis of an EDM Machined mold-printing die used for the production of truck spare parts. Engineering Failure Analysis. 61:62-68.

[2] Oskuie, A., Shahrabi, T. and Lajevardi, A. 2013. Failure of pipeline expander segments due to undesirable EDM. Engineering Failure Analysis. 28 :34-46.

[3] Murray, J., Clare, A. 2012.  Repair of EDM induced surface cracks by pulsed electron beam irradiation. Journal of Materials Processing Technology. 212 (12):2642-2651.

[4] Singh, N, Routara, B and Das, D. 2018. Study of machining characteristics of Inconel 601in EDM using RSM. Materials Today: Proceedings. 5 (2):3438-3449.

[5] Lee, H-T. and Tai, T.Y. 2003. Relationship between EDM parameters and surface crack formation.Journal of Materials Processing Technology. 142 (3):676-683.

[6] McGeough, JA. 2001. Micromachining of engineering materials. CRC Press.

[7] Kumar, S.S. Uthayakumar, M. Kumaran, S.T. Varol, T.  and Canakci, A. 2018. Investigating the surface integrity of aluminium based composites machined by EDM. Defence Technology. 98: 5-8.

[8] Rao, P.S., Ramji, K. and Satyanarayana, B. 2016. Effect of wire EDM conditions on generation of residual stresses in machining of aluminum 2014 T6 alloy. Alexandria Engineering Journal 55.(2):1077-1084.

[9] Arunachalam, S.R., Dorman, S.E.G., Buckley, R.T. Conrad, N.A. and  Fawaz, SA. 2018. Effect of electrical discharge machining on corrosion and corrosion fatigue behavior of aluminum alloys.International Journal of Fatigue. 111:44-53.

[10] Antar, M., Hayward, P., Dunleavey, J. and Butler-Smith, P. 2018. Surface Integrity Evaluation of Modified EDM Surface Structure. Procedia CIRP. 68:308-312.

[11] Kruth, J-P., Stevens, L., Froyen, L. andLauwers, B. 1995. Study of the white layer of a surface machined by die-sinking electro-discharge machining. CIRP Annals-Manufacturing Technology.44 (1):169-172.

[12] Guu, Y. 2005. AFM surface imaging of AISI D2 tool steel machined by the EDM process.Applied Surface Science. 242 (3-4):245-250.

[13] Kumar, B.M., Ramkumar, J., Basu, B.  and Kang, S. 2007. Electro-discharge machining performance of TiCN-based cermets. International journal of Refractory Metals and hard materials. 25 (4):293-299.

[14] Zeilmann, R., Ivaninski, T. and Webber, C. 2018. Surface integrity of AISI H13 under different pulse time and depths by EDM process. Procedia CIRP. 71:472-477.