Analysis of Material Flow and Phase Transformation in Friction Hydro-Pillar Processing of 1045 Steel
Subject Areas : welding
Moosa Sajed
1
,
S. M. Hossein Seyedkashi
2
1 - Department of Mechanical Engineering,
University of Birjand, Iran
2 - Department of Mechanical Engineering,
University of Birjand, Iran
Keywords:
Abstract :
[1] Sattari, S., Bisadi, H., and Sajed., M., Mechanical Properties and Temperature Distributions of Thin Friction Stir Welded Sheets of AA5083, International Journal of Mechanics and Applications, Vol. 2, No. 1, 2012, pp. 1-6, DOI. 10.5923/j.mechanics.20120201.01
[2] Sajed, M., Bisadi, H., Experimental Failure Study of Friction Stir Spot Welded Similar and Dissimilar Aluminum Alloys, Welding in the World, Vol. 60, No. 1, 2016, pp. 33-40, DOI. 10.1007/s40194-015-0268-6.
[3] Cui, L., Yang, X., Wang, D., Cao, J., and Xu, W., Experimental Study of Friction Taper Plug Welding for Low Alloy Structure Steel: Welding Process, Defects, Microstructures, and Mechanical Properties, Materials & Design, Vol. 62, 2014, pp. 271-281, DOI. 10.1016/j.matdes.2014.05.026.
[4] Buzzatti, D. T., Chludzinki, M., Santos, R. E., Buzzatti, J. T., Lemos, G. V. B., Mattei, F., Marinho, R. R., Paes, M. T. P., and Reguly, A., Toughness Properties of a Friction Hydro Pillar Processed Offshore Mooring Chain Steel, Journal of Materials Research and Technology, Vol. 8, No. 3, 2019, pp. 2625-2637, DOI. 10.1016/j.jmrt.2019.04.002.
[5] Vicharapu, B., Kanan, L. F., Clarke, T., and De, A., An Investigation On Friction Hydro-Pillar Processing, Science and Technology of Welding and Joining Vol. 22, No. 7, 2017, pp. 555-561, DOI. 10.1080/13621718.2016.1274849.
[6] Meinhardt, C. P., Chludzinski, M., Ribeiro, R. F., Rocha, C. L. F., Santos, A. C. S., and Strohaecker, T. R., Evaluation of Friction Hydro-Pillar Processing Welding in Duplex Stainless Steels (UNS S31803), Journal of Materials Processing Technology, Vol. 246, 2017, pp. 158-166, DOI. 10.1016/j.jmatprotec.2017.03.010.
[7] Hattingh, D. G., Bulbring, D. L. H., Els-Botes, A., and James, M. N., Process Parameter Influence On Performance of Friction Taper Stud Welds in AISI 4140 steel, Materials & Design, Vol. 32, No. 6, 2011, pp. 3421-3430, DOI. 10.1016/j.matdes.2011.02.001.
[8] Kanan, L. F., Vicharapu, B., Bueno, A. F. B., Clarke, T., and De, A., Friction Hydro-Pillar Processing of a High Carbon Steel: Joint Structure and Properties, Metallurgical and Materials Transactions B, Vol. 49, No. 2, 2018, pp. 699-708, DOI. 10.1007/s11663-018-1171-5.
[9] Chludzinski, M., Paes, M. P., Bastian, F. L., and Strohaecker, T. R., Fracture Toughness of Friction Hydro-Pillar Processing Welding in C–Mn Steel, Materials & Design, Vol. 33, 2012, pp. 340-344, DOI. 10.1016/j.matdes.2011.07.056.
[10] Yin, Y., Yang, X., Cui, L., Wang, F., and Li, S., Material Flow Influence On the Weld Formation and Mechanical Performance in Underwater Friction Taper Plug Welds for Pipeline Steel, Materials & Design, Vol. 88, 2015, pp. 990-998, DOI. 10.1016/j.matdes.2015.09.123.
[11] Xu, Y. C., Jing, H. Y., Han, Y. D., and Xu, L. Y., Numerical Simulation of the Effects of Various Stud and Hole Configurations On Friction Hydro-Pillar Processing, International Journal of Mechanical Sciences, Vol. 90, 2015, pp. 44-52, DOI. 10.1016/j.ijmecsci.2014.10.025.
[12] Li, W., Jiang, D., Yang, L., Pan, J., Qu, R., and Sun, T., Numerical Simulation of Temperature Field and Prediction of Microstructure in Friction Hydro Pillar Processing, Journal of Materials Processing Technology, Vol. 252, 2018, pp. 370-380, DOI. 10.1016/j.jmatprotec.2017.10.001.
[13] Landell, R., Kanan, L. F., Buzzatti, D., Vicharapu, B., De A., and Clarke, T., Material Flow During Friction Hydro-Pillar Processing, Science and Technology of Welding and Joining, Vol. 25, No. 3, 2020, pp. 228-234, DOI. 10.1080/13621718.2019.1679963.
[14] Sajed, M., Parametric Study of Two-Stage Refilled Friction Stir Spot Welding, Journal of Manufacturing Processes, Vol. 24, 2016, pp. 307-317, DOI. 10.1016/j.jmapro.2016.09.011.
[15] Sajed, M., Seyedkashi, S. M. H., A Novel Technique for Keyhole-Less Reinforced Friction Stir Spot Welding of Polyethylene Sheets, International Journal of Advanced Design and Manufacturing Technology, Vol. 12, No. 4, 2019, pp. 47-56.
[16] Sajed, M., Seyedkashi, S. M., Solid-State Micro-Alloying of Thick st37 Steel Plates with Sic Powder Using a Modified Friction Hydro-Pillar Process, Journal of Materials Research and Technology, Vol. 9, No. 4, 2020, pp. 7158-7171, DOI. 10.1016/j.jmrt.2020.04.068.
[17] Jafarzadegan, M., Feng, A. H., Abdollah-Zadeh, A., Saeid, T., Shen, J., and Assadi, H., Microstructural Characterization in Dissimilar Friction Stir Welding Between 304 Stainless Steel and st37 Steel, Materials Characterization, Vol. 74, 2012, pp. 28-41, DOI. 10.1016/j.matchar.2012.09.004.
[18] DEFORM, SFTC. "V11. 0 (PC) Documentation."
