Effect of the Number of Welding Passes on the Microstructure and Wear Behavior of St52 Plain Carbon Steel Coated with a High Chromium-Carbon Electrode
Subject Areas : weldingMohsen Barmaki 1 , Kamran Amini 2 , Farhad Gharavi 3
1 - Advanced Materials Research Center, Department of Materials Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
2 - Department of Mechanical Engineering,
Tiran Branch, Islamic Azad University, Isfahan, Iran
3 - Department of Materials Engineering,
Sirjan Branch, Islamic Azad University, Sirjan, Iran
Keywords:
Abstract :
[1] Amini, K., Bahrami, A., and Sabet, H., Evaluation of Microstructure and Wear Behavior of Iron-based Hard-facing Coatings on the Mo40 Steel, International Journal of ISSI, Vol. 12, No. 1, 2015, pp. 1-8.
[2] Davis, J. R., Surface Engineering for Corrosion and Wear Resistance, 2001, pp. 530.
[3] Surker, A. D., Wear of Metals, 2ed Edition, 1993, pp. 133.
[4] Oliviera, A. S. C., Tigrinho, J. J., and Takeyama, R. R., Coatings Enrichment by Carbide Dissolution, Surface and Coatings Technology, Vol. 202, No. 19, 2008, pp. 4660-4665.
[5] Kuo, C. W., Fan, C., Wu, S. H., and Wu, W., Microstructure and Wear Characteristics of Hypoeutectic, Eutectic and Hypereutectic (Cr, Fe) 23C6 Carbides in Hardfacing Alloys, Materials Transactions, Vol. 48, No. 9, 2007, pp. 2324-2328.
[6] Liu, S., Zhou, Y., Xing, X., Wang, J., Yang, Y., and Yang, Q., Agglomeration Model of (Fe, Cr) 7C3 Carbide in Hypereutectic Fe-Cr-C alloy, Materials Letters, Vol. 183, 2016, pp. 272–276.
[7] Chang, C. M., Chen, Y. C., and Wu, W., Microstructural and Abrasive Characteristics of High Carbon Fe–Cr–C Hardfacing Alloy, Tribology International, Vol. 43, No. 5-6, 2010, pp. 929–934.
[8] Lin, C. M., Chang, C. M., Chen, J. H., Hsieh, C. C., and Wu, W., Microstructure and Wear Characteristics of High-Carbon Cr-Based Alloy Claddings Formed by Gas Tungsten Arc Welding (GTAW), Surface & Coatings Technology, Vol. 205, No. 7, 2010, pp. 2590–2596.
[9] Chang, C. M., Chen, L. H., Lin, C. M., Chen, J. H., Fan, C. M., and Wu, W., Microstructure and Wear Characteristics of Hypereutectic Fe–Cr–C Cladding with Various Carbon Contents, Surface and Coatings Technology, Vol. 205, No. 2, 2010, pp. 245-250.
[10] Madadi, F., Shamanian, M., and Ashrafizadeh, F., Cladding of Stellite Composite on Carbon Steel by Gas Tungsten Arc Welding (GTAW), International Journal of ISSI, Vol. 6, No. 2, 2009, pp. 34-37.
[11] Fan, C., Chen, M. C., Chang, C. M., and Wu, W., Microstructure Change Caused by (Cr, Fe) 23C6 Carbides in High Chromium Fe–Cr–C Hardfacing Alloys, Surface and Coating Technology, Vol. 201, No. 3-4, 2006, pp. 908-912.
[12] Hajiannia, I., Shamanian, M., and Kasiri, M., Microstructure and Mechanical Properties of AISI 347 Stainless Steel/A335 Low Alloy Steel Dissimilar Joint Produced by Gas Tungsten Arc Welding, Materials and Design, Vol. 50, 2013, pp. 566-573.
[13] Kulishenko, B., Balin, A., and Filippov, M., Electrodes for Hardfacing Components Subjected to Abrasive and Impact-Abrasive Effects, Welding International, Vol. 19, No. 4, 2005, pp. 326-329.
[14] Yildizli, K., Eroglu, M., and Karamis, M. B., Microstructure and Erosive Wear Behavior of Weld Deposits of High Manganese Electrode, Surface & Coating Technology, Vol. 201, No. 16-17, 2007, pp. 7166-7173.
[15] Coronado, J. J., Caicedo, H. F., and Gomez, A. L., The Effects of Welding Processes on Abrasive Wear Resistance for Hardfacing Deposits, Tribology International, Vol. 42, No. 5, 2009, pp. 745–749.
[16] Fontalvo, G. A., Humer, R., Mitterer, C., Sammt, K., and Schemmel, I., Microstructural Aspects Determining the Adhesive Wear of Tool Steels, Wear, Vol. 260, No. 9-10, 2006, pp. 1028-1034.
[17] Bhushan, B., Introduction to Tribology, 1st Edition, New York, NY, 2002.
[18] Yang, J., Liu, Y., Ye, Z., Yang, D., and He, S., Microstructural and Tribological Characterization of Plasma-and Gas-Nitrided 2Cr13 Steel in Vacuum, Materials & Design, Vol. 32, No. 2, 2011, pp. 808-814.
