List of Articles plastic

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Evaluation of the effect of plastics bags containing silver nanocomposite of grapefruit’s peel on cucumber postharvest nutritional value and their possible penetration in tissue
  Ramesh Faghihi Kambiz Larijani Vahid Abdossi Pezhman Moradi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Design and Measure the Antecedents and Consequences of Consumer Purchasing Behavior in the Selection of Environmentally Friendly Packaging with a Mixed Approach
  SEYEDEH FATEMEH Alavi Foumani ALI Gholipour Soleimani hamidreza rezaei kelidbari
  10.30495/jomm.2022.67825.1943
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Examples of Frauds in Operations and Plastic Surgery
  Morteza Rahimi Razeyeh Mohebpoor
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Study of the biodegradability and thermal properties of wood-plastic composite obtained from wood flour, polyhydroxybutyrate and starch
  Hoda Norouzpour Amir hooman Hemmasi Mohammad Talaeipoor Behzad Bazyar Majid Abdous
  10.30495/jrnr.2023.73257.10289
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Changing the Atterberg’s limits and water retention characteristics of a loess soil containing Montmorillonite nanoclay
  Zahra Dravish eivari soheila Ebrahimi seyed alireza movahedi naeini Mahdi Zakeri nia
  10.30495/wsrcj.2021.18541
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Evaluation of Using Physical Floating Covers in Reducing Evaporation Loses from Small-Reservoirs Water Surface in Arid and Semi-arid Regions
  Fateme Hooshmanzade Mohammad reza Yazdani Seyed Farhad Mousavi
  10.30495/wsrcj.2023.70572.11333
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - The effect of soil type and compaction conditions on soil water characteristic curve
  Mansure Bayram Omid Bahmani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Review of Unsegregated Food Wastes’ Circular Bioeconomy by Insects’ Assistance
  Nassim Golestanehzadeh M. Honarvar
  10.30495/jftn.2022.69618.11224
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Investigating the Awareness of Food and Beverage Consumers Regarding the Types of Packaging
  mohammad mahdavi mazdeh nima fakhim hashemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - An Investigation into Possible Sources and Health Risks of Phthalic Acid Esters in the Iranian Laminated Flexible Films
  M. Mizani F. Rasouli Ghahroudi A. Zulfiqar A. R. Milaninejad H. Khanlarloo
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Identification of Gaps in the Framework of National Plastic Waste Management Law and their Causes Using the Ishikawa Diagrams (Case Study: Iran)
  Khatereh Feyzbakhsh Vaghef Seied Masoud Monavari Zahra Abedi Ali Mohammadi Abdorreza Karbasi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Perspectives and and behavior of those referring to Tehran Central Fruit and Vegetable Market about the consumption of plastic bags in Tehran
  Shabnam Sadegholbayan Nastaran Keshavarz Mohammadi Narges Abdipour Masoud Motassadi
  10.30495/jest.2018.14627.2321
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Effect of Light Conditions on Chestnut (Castanea Sativa) Leaf Morphology
  Mehrdad Zarafshar Moslem Akbarinia Ali Sattarian Hemed Yousefzade Mehdy Taieby
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Study on Thickness Swelling of Wood Plastic Composites Made From Beech Wood Flour-Polypropylene
  Shokooh Etedali Behbood Mohebby Mehdi Tajvidi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Preparation and Characterization of Diols and Polyols Based on Aminolysisof Poly (ethylene terephthalate) Wastes with Alkanolamines
  Samaneh Heidari Kambiz Tahvildari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Investigating the Effect of Cutting Condition on the Plastic Energy in Turning Process of AISI 1050
  Mohammad Meghdad Fallah Seyyed Reza Hamzeloo
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Investigating the Effects of Expansion Equal Channel Angular Extrusion (Exp-ECAE) on Dynamic Behavior of AA7075 Aluminum Alloy
  J. Shahbazi Karami S. Sepahi-Boroujeni Mohsen Khodsetan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Optimization of Tangential Cutting Force in Turning Operation in Machining of Unidirectional Glass Fiber Reinforced Plastics
  Surinder Kumar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Flow Study of Wood Plastic Composite Through a Circular Die in an Extrusion Process
  N. Jafarian Jam E. Soury
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Ecospiritual Pedagogy: A Learning Centric Educational Practice
  Siddhartha Dhungana Bharat Neupane
  10.30486/relp.2021.1911490.1228
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Numerical Analysis of the Effect of External Circumferential Cracks in Transition Thickness Zone of Pressurized Pipes Using XFEM – Elastic-Plastic Behavior
  H Salmi Kh EL Had H EL Bhilat A Hachim
  10.22034/jsm.2019.1882104.1511
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Effect of Vertex Angle on Elastic-Plastic Stability of a Steel Open Conical Shell
  H Shokrollahi
  10.22034/jsm.2019.1873249.1462
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - FEM Implementation of the Coupled Elastoplastic/Damage Model: Failure Prediction of Fiber Reinforced Polymers (FRPs) Composites
  I UD DIN P Hao M Aamir G Franz S Panier
  10.22034/jsm.2019.668617
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Thermo-Magneto-Elastic-Plastic Analysis of functionally magnetoelastic pressurized thick cylindrical structure
  Sahar Sohrabi S Rash Ahmadi
  https://doi.org/10.60664/jsm.2024.3121796
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - A Semi-analytical Approach to Elastic-plastic Stress Analysis of FGM Pressure Vessels
  A.T Kalali S Hadidi-Moud
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - Steady Thermal Stresses in a Thin Rotating Disc of Finitesimal Deformation with Mechanical Load
  J Kaur P Thakur S.B Singh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Implementing the New First and Second Differentiation of a General Yield Surface in Explicit and Implicit Rate-Independent Plasticity
  F Moayyedian M Kadkhodayan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Plastic Wave Propagation Model for Perforation of Metallic Plates by Blunt Projectiles
  S Feli S Noritabar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Mechanical Stresses in a Linear Plastic FGM Hollow and Solid Rotational Disk
  M Jabbari A Hatefkia M Shokouhfar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Elastic-Plastic Transition of Pressurized Functionally Graded Orthotropic Cylinder using Seth’s Transition Theory
  S Sharma R Panchal
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - Mechanical Stresses in a Linear Plastic FGM Hollow Cylinder Due to Non-Axisymmetric Loads
  M Shokouhfar M Jabbari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - An Enhanced Viscoplastic Constitutive Model for Semi-Solid Materials to Analyze Shear Localization
  M.H Sheikh-Ansari M Aghaie-Khafri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Polymer Additives
  Mandana Zormand Peyman Rajaei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - Study of the crack closure methods and repair it
  Kazem Reza Kashyzadeh Alireza Amiri Asfarjani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Numerical Investigation and Optimization of Die Parameters in Parallel Tubular Channel Angular Pressing Process
  Amin Armanian Hassan khademi zadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Investigation on effect of die geometric parameters on equal channel angular extrusion of bulk nanostructured magnesium alloy AZ31
  Mohammad Farzanfar Ali Heidari Mohsen Loh-mousavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - The Appearance of Plastic Images in Pottery and its Relation to Cultural Changes Occurred with the Transition from Bronze Age to Iron Age at Iran
  Hamidreza Valipour Iman Mostafapour Hossein Davoudi Ahmad Chaychi AmirKhiz
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Production of bioplastics by bacilli isolated from the landfill of waste and sewage in Golestan province
  Amin Lotfvarzi seyed Taleb houseini Ali Bagheri hashem abad Hamid reza Pordeli Farhad Yolmeh Ania Ahani azari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - The elimination of plastic bags: A customer perspective on logistics challenges
  Hairul Rizad Md Sapry Aina Syuhada Badrul Hisham Abd Rahman Ahmad
  10.22094/joie.2022.1961962.1969
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Examining the Mixing Plan and the Results of the Plastic Concrete
  Abolfazl Ostovarzijerdi Akbar Ghanbari Mohammad Karkon
  10.22094/jseg.2021.688675
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - Design Approach of Bolts and Sandwiching Steel Plates in Hybrid-Sandwiching Systems Based on FEM
  Alireza Zaferani Pasha Javadi Parham Memarzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - A Mathematical Modeling for Plastic Analysis of Planar Frames by Linear Programming and Genetic Algorithm
  Leila Shahryari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - Investigation of Stress-Strain Behavior of Plastic Concrete Using Monotonic Triaxial Compression Tests
  y. Pashang pisheh seyed majddin Mir mohammad hosseinib
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - The Investigation of Effective Factors in the Removal of Bentonite Jelly from the Joints of Cut-off Wall Panels
  Seyed Majdeddin Mir Mohammad Hosseini Abdolhossein Azadmaneshb
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - Investigation of Failure Mechanism in Earth Dam upon Triggered Liquefaction
  Farzad Peyman
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Evaluation of Spring Sweet Corn (Zea mays var saccharata) Production in Different Planting Date under Plastic Cover in Gachsaran Province
  H. Naraki, H. Faraji M. Movahedi Dehnavi S.K. Didgah
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - The effect of fish powder using on wood plastic composite biodegradability
  ali kazemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - Analyzing the Plastic Surgery in Fiqh Imammiyeh and Iranian Criminal Law
  Hassan Hajitabar Mahboubeh Mousavi sheikh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  49 - Microplastics, an emerging challenge for food safety
  G. karim
  10.30495/jfh.2022.1967981.1377
• Open Access Article
  • Abstract Page
  • Full-Text
  
  50 - Modelling Dependency of the Steady-State Grain Size on the Stacking Fault Energy in Severely Plastic Deformed Materials
  Maryam Bahmanpour Majid Abdellahi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  51 - Optimization of die geometry for Tube Channel Pressing
  Mohammad Hassan Farshidi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  52 - Finite element simulation of pyroplastic deformation, anisotropic shrinkage and heterogeneous densification for ceramic materials during liquid phase sintering process
  Hamed Yaghoubi Esmail Salahi Fateme Taati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  53 - Upper bound and numerical analysis of cyclic expansion extrusion (CEE) process
  M. M. Samandari S.H.R. Torabi Ghader Faraji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  54 - Plastic deformation analysis in parallel tubular channel angular pressing (PTCAP)
  Ghader Faraji Mahmoud Mousavi Mashhadia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  55 - A new approach for achieving excellent strain homogeneity in tubular channel angular pressing (TCAP) process
  Ghader Faraji F. Reshadi M. Baniasadia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  56 - Plastic deformation of 7075 Aluminum Alloy using Integrated Extrusion-Equal Channel Angular Pressing
  mehdi shaban sahel gozalzadeh beitallah eghbali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  57 - Finite Element Modeling of Strain Rate and Grain Size Dependency in Nanocrystalline Materials
  Minoo Tabanfard
• Open Access Article
  • Abstract Page
  • Full-Text
  
  58 - Modeling and production of high strength Al strips by equal channel multi angular pressing method
  Peyman Keshtiban Mohammad Zadshakouyan Ghader Faraji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  59 - Effect of Twist Extrusion Process on the Mechanical Properties and Microstructure Evolution of 70-30 Brass Alloy
  Sara Hosseini Faregh Amir Hasani Majid Naseri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  60 - Evaluation of Microstructure and Tensile Behavior of Fine-Grained AZ61 Alloy Tube Processed by Severe Plastic Deformation
  Milad AAli Ghader Faraji Mohammad Reza Sadrkhah Ali Fata Mohammad Jafar Hadad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  61 - Effects of Equal Channel Angular Pressing (ECAP) Process with an Additional Expansion-Extrusion Stage on Microstructure and Mechanical Properties of Mg–9Al–1Zn
  Mahnoush Rassa Geonik Azadkoli Mohammad Eftekhari Ali Fata Ghader Faraji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  62 - Continuous Grain Refinement of Pure Aluminum During Cyclic Contraction/Expansion Extrusion (CCEE) Analyses by Micromechanical-Based FE and Experimental Methods
  Hossein Jafarzadeh Sina Hassan Alipouri Fard Alireza Babaei
  10.71670/jmatpro.2024.981647
• Open Access Article
  • Abstract Page
  • Full-Text
  
  63 - Fine Grain Formation in as Cold Worked SP700 Titanium Alloy and Its Effect on Mechanical and Superplastic Properties
  Marjan Daryaban Maryam Morakabati Noshin  Meraji
  10.71670/jmatpro.2024.981663
• Open Access Article
  • Abstract Page
  • Full-Text
  
  64 - Effect of Alumina Nanoparticles on the Enhancement of Shape Memory, Mechanical and Impact Properties of TPU/ABS blend
  Zeinab Sohrabi Abdolhossein Fereidoon Farzaneh Memarian
  10.22034/jna.2016.03.004
• Open Access Article
  • Abstract Page
  • Full-Text
  
  65 - Mechanical Stability of RCSed and ECAPed Intramedullary 316L Stainless Steel Nails in the Treatment of Diaphyseal Bone Fractures
  Abdolreza Rastitalab Salar Khajehpour Ahmad Afsari Shahin Heidari Javad Dehghani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  66 - An Investigation of Using RCS-processed Intramedullary Stainless Steel 316L Nail in the Treatment of Diaphyseal Bone Fractures
  Abdolreza Rastitalab Salar Khajehpour Ahmad Afsari Shahin Heidari Javad Dehghani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  67 - Investigation of Effective Parameters on the Surface Temperature Gradient under Equal Channel Angular Pressing Process of AA2017
  Farshid Ahmadi Hadi Mansouri Elyas Sarami Foroushani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  68 - Investigation of Effective Plastic Strain Heterogeneity and the Effect of Using Interface Sheet in Constrained Groove Pressing of Copper Sheet
  Moein Gholami Ali Hasanabadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  69 - An Investigation of the Manufacturing Process, Structure, and Performance of the New Micro and Nano Thermoplastic-based Composites Prepared with Zeolite Filler
  Ahmed Hebatalrahman
• Open Access Article
  • Abstract Page
  • Full-Text
  
  70 - The Optimization of the Effective Parameters of the Die in Parallel Tubular Channel Angular Pressing Process by Using Neural Network and Genetic Algorithm Methods
  Amin Armanian Hassan Khademi Zadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  71 - Experimental Investigation of Thermal Conductivity of Aluminum Alloy 3003 Produced by Equal Channel Angular Rolling Process
  Mohammad Honarpisheh Mohammad Reza Aghili Mahdi Kotobi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  72 - Numerical/Experimental Analysis of the Deformation of Tubes under Concentrated Load
  Javad Jafari Fesharaki Omid Rejali Seyed Ghasem Madani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  73 - Friction Stir Welding of Dissimilar Poly Methyl Methacrylate and Polycarbonate Sheets
  Mojtaba Rezaee Hajideh Omid Shapurgan Navid Molla Ramzani Essa Hasan Nejad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  74 - Deformation of Al Alloy during Integrated Extrusion and ECAP: A Simulation Research
  Ankit Sahai Shanti S. Sharma Suren N. Dwivedi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  75 - A Hybrid Thermal Assisted Friction Stir Welding Approach for PMMA Sheets
  Mojtaba Rezaee Hajideh Mohammadreza Farahani Masoud Ahmad Khanbeigi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  76 - Design and Construction of Electromechanical Wrist Hand Orthosis with a Functional Interface
  Behzad Karimkhani Sayed Ali Mousavi Meysam Sattari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  77 - New Surface Marine Microplastics for Colonization, Biofilm Formation and Biodegradation
  Nahid Masoumi Seyed Reza Hosseini Doust Morteza Azizollahi Maryam Mianabadi
  10.71886/bioem.2022.1001644
• Open Access Article
  • Abstract Page
  • Full-Text
  
  78 - The Effects of Microplastic Pollution on Aquatic Microorganisms: A review of the sources, fate, and effects
  Morteza Azizollahi Aliabadi Seyed Reza Hosseini Doust Maryam Miyanabadi
  10.71886/bioem.2022.1001656
• Open Access Article
  • Abstract Page
  • Full-Text
  
  79 - Numerical investigation of new steel connection using short stub column
  Farzad Hatami mehrdad taheripour Reza Raoufi
  10.30495/civil.2023.1974250.1310
• Open Access Article
  • Abstract Page
  • Full-Text
  
  80 - The Experimental Study of the Influence of Function and Arrangement of Geogrids and Uniform Stress Distribution in the Tensile Area of the Concrete structures
  Ashkan khodaBandeLou aliasgar akbari bargoshadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  81 - Comparing Behavior of Steel Buildings with Diagonal & Chevron Knee Braced Frames under Lateral Loads
  s.mehdi Zahraei Saeid Bahram Masjed bari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  82 - Numerical Analysis of Performance of Eccentric Braced Frames Equipped with the Steel Plate in the area Under the link beam and the beam out of the link
  Hamid SattarianKarajAbab ahmad maleki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  83 - Numerical Study of the Effect of Adding a Posttensioned Stiffener Layer on the Flexural Strength of Reinforced Concrete Beams
  Alireza Mirzaee Ashkan Torabi Amir Tabebordbar
  10.30495/civil.2022.690411
• Open Access Article
  • Abstract Page
  • Full-Text
  
  84 - Numerical and Experimental Investigation of Multi-Perforated Steel Shear Wall Under Cyclic Loading
  Ali sahebjam Hossein shokati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  85 - Numerical investigation of the new steel connection using short stub column
  mehrdad taheripour Farzad Hatami Reza Raoufi
  10.30495/civil.2023.703236
• Open Access Article
  • Abstract Page
  • Full-Text
  
  86 - The study of Iranian food contact plastic wrap contamination with bacteria causing food-borne disease
  Hajieh Ghasemian Safaei Nasrin Mirzaei Ahmand Reza Bahrami Bayan Saeidi Ebrahim Rahimi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  87 - Synthesis and Catalytic Performance of Ni/Silica Pillared Clay on HDPE Plastic Hydrocracking to Produce Liquid Hydrocarbons as Fuel
  Darwanta Darwanta Wega Trisunaryanti Karna Wijaya Suryo Purwono
  10.30495/ijc.2023.1979198.1992
• Open Access Article
  • Abstract Page
  • Full-Text
  
  88 - تاثیر پوشش های بسته بندی و ترکیب گازی بر حفظ کیفیت پس از برداشت گل همیشه بهار
  داود عطایی روح انگیز نادری مصباح بابالار محمد موسوی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  89 - Influence of Different Colored Plastic Mulch on the Growth of Lettuce (Lactuca sativa)
  Edmar N. Franquera
• Open Access Article
  • Abstract Page
  • Full-Text
  
  90 - Evaluation of Mulberry(Morus spp.) Genotypes for Tolerance to Major Abiotic Stresses
  M. K. Prithvi Raje Urs Rajashekar Rajashekar A. Sarkar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  91 - Applying Taguchi Method to Optimize Parameter of Injection Molding Process
  Minh Ly  Duc Doan Minh  Anh Do Ngoc  Hien
• Open Access Article
  • Abstract Page
  • Full-Text
  
  92 - The effect of glucose, sucrose, lactose carbon sources on the growth of Alcaligenes eutrophus for the production of polyhydroxybutyrate
  atefeh farjadmanesh seyed ahmad ataei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  93 - Estimating an appropriate plastic concrete mixing design for cutoff walls to control leakage under the earth dam.
  A Pashazadeh M Khosravi N Ganjian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  94 - Cognition and Study of Relationship between Emotional Intelligence and Entrepreneurship of Industrial Managers (Case study: Rubber and plastic Industry in Tehran)
  Gh. Abbaspour Esfeden M. H. Cheraghali M. Rahmani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  95 - روش های تغییر شکل شدید پلاستیک به منظور ریز دانه سازی ساختار ماده برای بهبود خواص مکانیکی در فلزات
  سید حسن سجادی بهروز مهدی خوانی علی پیروی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  96 - بهبود خصوصیات مکانیکی ، به ویژه افزایش مقاومت لوله ها توسط میکرو ساختار فلزات با استفاده از روش تغییر شکل پلاستیک شدید
  سید حسن سجادی حسین پوراکبری سیامک صادقی امید میرجابری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  97 - تأثیر فرآیندهای HPT و CGP بر خصوصیات معمولی مس
  ش. جعفرزاده H. Bisad ه. میانجی ع. زینعلی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  98 - بهبود خصوصیات مکانیکی ، به ویژه افزایش مقاومت لوله ها توسط میکرو ساختار فلزات با استفاده از روش تغییر شکل پلاستیک شدید
  سید حسن سجادی حسین پور اکبری سیامک صادقی امید میرجابری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  99 - تجزیه و تحلیل تغییر شکل غیر خطی و مدل سازی کامپوزیت با لایه های آلومینیوم
  حبیب اسفندیار سعید ادیب نظری وحید منفرد علی خطیب
• Open Access Article
  • Abstract Page
  • Full-Text
  
  100 - خستگی کنترل شده بار از AZ31B
  E. کلاته مولایی ح. جاهد
• Open Access Article
  • Abstract Page
  • Full-Text
  
  101 - UNDERSTANDING BEHAVIOR OF ANTINEOPLASTIC MOLECULES BASED ON MLR MODELS
  S. Hajiali M. S. Doroudian H. Borna
• Open Access Article
  • Abstract Page
  • Full-Text
  
  102 - Effect of different irrigation regimes, plastic mulch and anti-transpiration materials on some physiological attributes and grain yield of rainbow corn
  Davoud Adelian Hooshang Farajee Amin Salehi Ali Moradi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  103 - Study of chemical and ecological weed management methods in potato (Solanum tuberosum L.)
  Afshar Azadbakht Mohammadtaghi Alebrahim Hmidreza Mohammaddoust Chamanabad Akbar Ghavidel Hossein Karbalaei Khiavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  104 - Rheological Properties of Chocolate Pistachio
  S. Khorasani M. H. Azizi M. Eshaghi
  10.22034/jon.2014.515694
• Open Access Article
  • Abstract Page
  • Full-Text
  
  105 - A Study About the Possibility of Eearly Planting of Late-Maturing Ricecultivars in Lordegan Using Plastic Covered Nursery
  LOTFALI LOTFI SAM SAFARI
  10.30486/roce.2018.545280
• Open Access Article
  • Abstract Page
  • Full-Text
  
  106 - Interaction of solarization time and plastic color on germination of Amaranthus retroflexus and Sinapis arvensis
  Mohammadhassan Baeshtiagh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  107 - Interaction of solarization time and plastic color on germination of Amaranthus retroflexus and Sinapis arvensis
  M. H. Baeshtiagh F. Mohajeri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  108 - Edible Film Based on Lallemantia peltata L. Seed Gum: Development and Characterization
  Anna Abdolshahi Mojtaba Heydari Majd Mehdi Abdollahi Saeideh Fatemizadeh Leila Monjazeb Marvdashti
  10.22034/jchr.2020.1896596.1118
• Open Access Article
  • Abstract Page
  • Full-Text
  
  109 - Luteolin Co-treatment abates Polystyrene Microplastics (PS-MPs) Induced Spermatotoxicity and Dysgonadogenesis in Rats Via up-regulation of Gonadotropin, Enhanced Spermatogenesis, Downregulation of Caspases, and Oxido-inflammation
  Oyovwi Mega Obukohwo Ohwin Peggy  Ejiro
  10.22034/JCHR.2024.1087391
• Open Access Article
  • Abstract Page
  • Full-Text
  
  110 - Source of Microplastic Pollution Within Human Stool in the Surabaya River Basin Area
  Edza Wikurendra Sofi Aini Imre Nagy Globila Nurika Novera Herdiani Shamsul Shamsudin
  10.22034/jchr.2022.1940009.1406
• Open Access Article
  • Abstract Page
  • Full-Text
  
  111 - The effect of temperature of equal- chanel angular pressing process on mechanical properties and biocompatibility of titanium dental implant
  محمد خدائی Payam Eslamian mahmood meratian Mahdi Hadavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  112 - Investigation of the Size Effect in Compression Test by Combined Hill-Taylor Theory
  Faraz Rahimzadeh Lotfabad Ramin Ebrahimi
  10.30495/apme.2021.1904499.2005
• Open Access Article
  • Abstract Page
  • Full-Text
  
  113 - Investigation of the effect of thermal treatment after welding on the corrosion properties of the interconnecting joint wall of Cu / SS 304 sheets
  Ali Ebrahimi Akbarabadi Abbas Saadat Mohammadreza Khanzadeh hamid bakhtiari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  114 - The Study of Histology and Histometry Changes in the Stomach and Intestine of Male Mice Consuming Nano-Styrene Microplastics
  Mohammad Reza Ghafari Manesh Esmail Fattahi Fereshteh Mirmohammadrezaei Sima Mashayekh
  10.22034/ascij.2024.2003866.1573
• Open Access Article
  • Abstract Page
  • Full-Text
  
  115 - Stabilized crack-opening stresses as a function of R-ratios and stress levels
  Rahi Chermahini Majid Jabbari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  116 - The effect of explosive welding variables on corrosion behavior of 304 stainless steel–copper joint in 3.5% NaCl solution concentration environment
  MohammadReza Khanzadeh Reza Peykari Hamid Bakhtiari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  117 - بررسی تجربی اثر پارامترهای جوشکاری صفحه داغ بر چقرمگی شکست و استحکام کششی درز جوش قطعات ترموپلاستیکی
  امیر هوشمندپور عبدالمحمد رضاوند مهدی نظری مرویان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  118 - تحلیل فرایند اکستروژن پیچشی در قالب با سطح مقطع بیضوی با استفاده از روش کران بالا
  یاسر میرباقری حامد معصومی مجید سیدصالحی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  119 - بررسی فرایند نورد چهار غلتکی به روش تحلیلی و عددی
  محسن اشرفی وحید پورغریب شاهی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  120 - اثر کسرهای حجمی بر تمرکز تنش سوراخ در مواد مرکب تک لایه با احتساب پلاستیسیته در ماتریس
  پژمان تقی پور بیرگانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  121 - Study of Geotechnical Properties of Clay mixed with Geofoam Particles
  Sepehr Saedi Rouzbeh Dabiri Larissa Khodadadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  122 - Effect of Plastic mulch and bed system on maize (zea mays) yield and weeds suppression
  Mohsen Garshasebi Hamid Reza Rajab Larijani Mohammad Nasri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  123 - Effect of soil solarization on soil characteristics and weeds dry matter in Estahban region
  Mohammad hassan Baeshtiagh Farhad Mohajeri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  124 - The effect of mycorrhizal fungi, water stress and year on flower yield and some characteristics of medicinal plant of Borage (Borago officinalis L.) in Yasouj region
  Ali Rahimi
  https://doi.org/10.71890/iper.2023.1105511
• Open Access Article
  • Abstract Page
  • Full-Text
  
  125 - investigating the effect of porosity Percentage on heat transfer in plastic injection molds created by selective laser melting
  Seyed mostafa MirTabaei Afshin Judaki Morteza Taher Niya
• Open Access Article
  • Abstract Page
  • Full-Text
  
  126 - Effect of mechanical sever plastic deformation on corrosion current density and electrochemical impedance of AZ91 magnesium Alloy
  Seyed Rahim Kiahosseini Armin Aminian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  127 - Investigating the mechanical properties of the composite made of polypropylene and Conocarpus wood flour
  Amir Mohammadinia parizad sheikhi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  128 - Investigating the effect of post-weld heat treatment on the corrosion properties of the explosive welded three-layer joint of Cu/Al/Cu
  Heydar Ali Zamani Mohammad Reza Khanzadeh Ali  Bakhtiari Hossein Paydar
  10.71939/jsme.2024.1119738
• Open Access Article
  • Abstract Page
  • Full-Text
  
  129 - Comparison And Verification of The Results of The GTN Damage Model and The Porous Metal Plasticity Model in The Square Deep Drawing Process
  Navid Givianpour Hamed  Deilami Azodi Shahrouz Yousefzadeh Siamak Mazdak
  10.71644/admt.2025.1120325
• Open Access Article
  • Abstract Page
  • Full-Text
  
  130 - Design and manufacturing of a fully automated thermoforming machine for the production of confectionary boxes
  Mahmood  Bizhani Mostafa Pirmoradian Reza Abedinzadeh
  10.71939/jsme.2024.1126825
• Open Access Article
  • Abstract Page
  • Full-Text
  
  131 - Occurence and Distribution of Microplastics in the Hyporheic Zone in the Ziarat River
  Nasim Shabani Mehdi Meftah Halaghi Amir Ahmad Dehghani حسن رضایی محمد عبداحسینی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  132 - Prediction of Defects in the Plastic Injection Process by Mold Flow Software Based on the Experimental Data
  Ahmad Afsari Sayed Ahmad Behgozin Mohammad  Ramezani Seyed Alireza Hamidi
  10.71762/kkq9-yj18
• Open Access Article
  • Abstract Page
  • Full-Text
  
  133 - Designing a model in order to stratify organizational resilience factors in knowledge-based companies in the plastic industry
  Mohsen Hashemi Jalal Haghighat monfared Abolghasem Sarabadani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  134 - Flexural behavior assessment of an eco-friendly thermoplastic composite sandwich panel with recyclable core and faces
  Seyed Ali Mousavi Hassan Shokrollahi Hadi Sabouri
  https://doi.org/10.60664/jsm.2024.1130323
• Open Access Article
  • Abstract Page
  • Full-Text
  
  135 - Study of Mechanical and Thermal Properties of NBR/PP-Nano Clay Composite
  ایمان Farahbakhsh S.A Manafi مهدی Sahedi Asl بهزاد Nayebi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  136 - Effect of severe plastic deformation process on mechanical properties of 1.7225 Steel
  behrouz mahdikhani Mehrdad Javadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  137 - A Review of the Most Important Methods for Severe Plastic Deformation of Titanium
  Sayyed Mohammadreza Sedehi Mohammadreza Maraki Ali Jalali Hadi Ezadi
  10.30495/jnm.2024.32878.2021
• Open Access Article
  • Abstract Page
  • Full-Text
  
  138 - Production of Aluminum metal matrix composite reinforced with Al-Cr-Fe quasicrystal nano-powder by using accumulative roll bonding process and investigation mechanical properties
  Shima Pashangeh Morteza Alizadeh Rasool Amini
  10.30495/jnm.2021.28185.1922
• Open Access Article
  • Abstract Page
  • Full-Text
  
  139 - analysis of plastic instability during sandwich sheet rolling
  حامد ثابت شهرام خیر اندیش شمس الدین میر دامادی مسعود گودرزی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  140 - The effect of severe plastic deformation on the natural ageing behavior of aluminum alloy 2024
  S. Khani Moghanaki M. Kazeminezhad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  141 - Investigation of Role of both Nucleating Agent and Plasticizer on Physical, Mechanical and Thermal Properties of Poly(Lactic Acid)
  S. M. k. Fehri S. M. Zebarjad A. Lazzeri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  142 - Microstructure and Mechanical Properties of Plain Low Carbon Steel Processed by Integrated Extrusion and Equal Channel Angular Pressing (Ex-ECAP)
  مهدی Shaban Ghazani اکبر Vajd بشیر Mosadegh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  143 - Investigation of effective parameters in the sandwich and conventional rolling process of the thin steel sheet using the finite element method
  V. Ali mirzaloo
• Open Access Article
  • Abstract Page
  • Full-Text
  
  144 - Evaluation of internal surface roughness in fiberglass pipes by surface roughness instruments
  Farnoush Aghaee Daneshvar Nasser Talebbeydokhti Seyed Mehdi Dehghan Seyed Mohammad Mehdi Elhamian
  10.30495/wej.2024.31547.2377
• Open Access Article
  • Abstract Page
  • Full-Text
  
  145 - Experimental and Numerical Investigation of Local Buckling in Steel Reduced Beam Sections (RBSs)
  Alireza Zaferani pasha pasha پرهام معمارزاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  146 - Investigation of Microplastics ingestion in some commercial fish species from the Northern Oman Sea, Iran
  Mahsa Mobasheri lobat taghavi Tooraj  Valinassab Hassan  Nasrollahzadeh Saravi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  147 - Mitigation Potential for Improving the Life Cycle of Plastic Products in Indonesia
  Iwan Guntoro Abdul Rahman Nugraheni Setiastuti Ari Widiarto Fitri Kurniawati Fathiah Ulfah Robby Marlon Brando Surat Indrijarso Amar Makruf Tinulad Fil Ardli Adi Akhmadi Pamungkas Muhammad Amirullah Makmunsyah Oktaufik
  10.71720/joie.2025.1190167
• Open Access Article
  • Abstract Page
  • Full-Text
  
  148 - The role of green managment in reducing plastic use a systematic review
  Nazanin Khakipour Shiva Dehghan Abkenar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  149 - Crack behavior investigation and crack opening stresses for plane stress, plane strain and 3D cases
  Rahmat Ghadimi Chermahini Majid Jabbari
  10.71939/jsme.2024.1195171
• Open Access Article
  • Abstract Page
  • Full-Text
  
  150 - Comparative Analysis of Phthalates Migration into Mayonnaise and Mustard Sauce from Polyethylene Terephthalate (PET) Containers
  mahta samadi maryam mizani Shahram Shoeibi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  151 - Experimental Investigation of Heat Treatment Effects on Mechanical Properties and Microstructure of AA6063 Alloy in ECAP Process
  Hossein Tamim Mohammad Javad Saleh Parhizkar
  https://doi.org/10.60664/jsm.2025.1198119
• Open Access Article
  • Abstract Page
  • Full-Text
  
  152 - Optimizing the profile of spiral corrugated and Corrugated polyethylene pipes using neural networks
  Mahdi Vaghari Oskouei Ali Kashi