Optimizing the profile of spiral corrugated and Corrugated polyethylene pipes using neural networks

Subject Areas : Journal of New Applied and Computational Findings in Mechanical Systems

Mahdi Vaghari Oskouei ¹ , Ali Kashi ²

1 -
2 - CEO

Received: 2025-02-03 Accepted : 2025-03-09 Published : 2025-03-17

Keywords: Optimized profile, Thermoplastic Pipe, FEM, Neural Network, Genetic Algorithm,

Abstract :

The aim of this paper is to obtain an optimized profile for the manufacturing of a thermoplastic PE80 pipe to achieve the lowest possible weight per pipe unit while maintaining an allowable amount of diameter variation according to ISO 9969 standard. In this paper, the behavior of the material will be analyzed using the FEM (Finite Element Analysis) method in Ansys Mechanical software. The types of pipes studied (in terms of geometry) are corrugated and spiral corrugated pipes, and the goal is to obtain an optimized profile with varying geometric conditions that results in the least weight while adhering to the constraints set by the standard. To precisely find the optimized profile, a very high number of runs from the dataset is required, which would be costly; therefore, in this paper, with a selection of initial runs chosen by the experimental design method, a neural network is trained for the weight function so that it can be directly studied as a function. This way, instead of adjusting and solving the Ansys model each time to extract the weight of the dataset or the deformation under loading, the function can be executed in a fraction of a second, providing the values instantly. The optimization algorithm used is a genetic algorithm, which utilizes the developed neural network functions and obtains the optimal weight conditions under the deformation constraints of the standard.

References:

[1] Emsley, J., (2001). Polyethylene: Properties and applications. Polymer Journal, 33(2), pp 89–103.
[2] International Organization for Standardization. (2016). Plastics—Determination of the stiffness of rigid plastics—Flexural test (ISO 9969:2016). ISO.
[3] Mosquera Morales, J. A., (2023). Characterization and evaluation of mechanical properties in double-wall PVC sewer pipes.
[4] Kefci, Y., (2020). Determination of the optimum geofoam geometry for shallowly buried flexible pipe by finite element analyses (Master's thesis, Middle East Technical University).
[5] Bilski, J., Kowalczyk, B., Marchlewska, A., Zurada, J. M., (2020). Local Levenberg-Marquardt algorithm for learning feedforwad neural networks. Journal of Artificial Intelligence and Soft Computing Research, 10(4), pp 299-316.
[6] Paji, M. K., Gordan, B., Bedon, C., Faridmehr, I., Valerievich, K., Hwang, H. J., (2023). Artificial Neural Network Levenberg-Marquardt Based Algorithm for Compressive Strength Estimation of Concrete Mixed with Magnetic Salty Water. Engineered Science, 23.
[7] Mathkoor, M. S., Jassim, R. J., Al-Sabur, R., (2024). Application of Pattern Search and Genetic Algorithms to Optimize HDPE Pipe Joint Profiles and Strength in the Butt Fusion Welding Process. Journal of Manufacturing and Materials Processing, 8(5), 187.
[8] Rao, S. S., (2019). Engineering optimization: theory and practice. John Wiley & Sons.
[9] Alwosheel, A., van Cranenburgh, S., Chorus, C. G., (2018). Is your dataset big enough? Sample size requirements when using artificial neural networks for discrete choice analysis. Journal of choice modelling, 28, pp 167-182.
[10] Goodfellow, I., (2016). Deep learning (196). MIT press.
[11] Marsili Libelli, S., Alba, P., (2000). Adaptive mutation in genetic algorithms. Soft computing, 4, pp 76-80.
[12] Kaya, Y., Uyar, M., (2011). A novel crossover operator for genetic algorithms: ring crossover. arXiv preprint arXiv:1105.0355.