Investigating the Effect of Cutting Condition on the Plastic Energy in Turning Process of AISI 1050
Subject Areas : traditional and nontraditional manufacturing
Mohammad Meghdad Fallah
1
,
Seyyed Reza Hamzeloo
2
1 - Mechanical Engineering Department, Shahid Rajaee Teacher Training University, Tehran, Iran
2 - Department of Mechanical Engineering,
Shahid Rajaee Teacher Training University, Iran
Keywords:
Abstract :
[1] Duflou, J. R., et al., Towards Energy and Resource Efficient Manufacturing: A Processes and Systems Approach, CIRPAnn Manuf Technol, Vol. 61. No.2, 2012, pp. 587-609.
[2] Yuan C, Zhai Q and Dornfeld D. A three dimensional system approach for environmentally sustainable manufacturing. CIRPAnn Manuf Technol, Vol. 61, No. 1, 2012, pp. 39-42.
[3] Neugebauer, R., et al., Influence Exerted by Tool Properties on the Energy Efficiency During Drilling and Turning Operations, CIRP J. Manuf Sci. Technol, Vol. 4, 2011, pp. 161-169.
[4] Oda, Y., et al., Study of Optimal Cutting Condition for Energy Efficiency Improvement in Ball End Milling with Tool-Workpiece Inclination, CIRPAnn Manuf Technol, Vol. 61, 2012, pp. 119-122.
[5] Rajemi, M. F., Mativenga, P. T., and Aramcharoen, A., Sustainable Machining: Selection of Optimum Turning Conditions Based on Minimum Energy Considerations, Journal of Cleaner Production, Vol. 18, 2010, pp. 1059-1065.
[6] Zhao, G., et al., Energy Consumption Characteristics Evaluation Method in Turning, Advances in Mechanical Engineering, Vol. 8, No. 11, 2016, pp. 1-8.
[7] Riefa, M., Karpuschewskib, B., and Kalhöfera, E., Evaluation and Modeling of the Energy Demand During Machining, CIRP Journal of Manufacturing Science and Technology, Available Online 20 June 2017, In Press, Corrected Proof.
[8] Balogun, V. A., Edemb, I. F., Optimum Swept Angle Estimation Based on the Specific Cutting Energy in Milling AISI 1045 Steel Alloy, International Journal of Engineering, Vol. 30, No. 4, 2017, pp. 591-596.
[9] Davim, J. P., Maranhão, C., A Study of Plastic Strain and Plastic Strain Rate in Machining of Steel AISI 1045 Using FEM Analysis, Materials and Design, Vol. 30, 2009, pp. 160-165.
[10] Grzesik, W., Advanced Machining Processes of Metallic Materials: Theory, Modelling and Applications, Elsevier Science 2008, Oxford.
[11] Ma, J., Ge, X., Chang, S. I., and Lei, S., Assessment of Cutting Energy Consumption and Energy Efficiency in Machining of 4140 Steel, Int J. Adv Manuf Technol, Vol. 74, 2014, pp. 1701-1708.
[12] Tuğrul, Ö., Erol, Z., Finite Element Analysis of the Influence of Edge Roundness on the Stress and Temperature Fields Induced by High-Speed Machining, Int. J. Adv. Manuf. Technol., Vol. 35, No. 3-4, 2007, pp. 255-267.
[13] Duan, C. Z., et al., Finite Element Simulation and Experiment of Chip Formation Process During High Speed, Int. J. of Recent Trends in Engineering, Vol. 1, No. 5, 2010, pp. 46-50.
[14] Seshadri, R., et al., Finite Element Simulation of the Orthogonal Machining Process with Al 2024 T351 Aerospace Alloy, Procedia Engineering, Vol. 64, 2013, pp. 1454-1463.
[15] Umbrello, D., Finite Element Simulation of Conventional and High Speed Machining of Ti6Al4V Alloy, Journal of Materials Processing Technology, Vol. 196, No. 1-3, 2008, pp. 79-87.
[16] Erick, O., et al., Mechinery's Handbook, 28th Edition, Industrial Press Inc. 2008, New York.
[17] Sandeep, B., Survase, P., Darade, D., and Ganesh, K., Numerical and Experimental Analysis of Tool Wear in Orthogonal Cutting, International Engineering Research Journal, Vol. 2, 2015, pp. 2895-2899.
[18] Asad, M., Mabrouki, T., Ijaz, H., Aurangzeb Khan, M., and Saleem, W., On the Turning Modeling and Simulation: 2D and 3D FEM Approaches, Mechanics & Industry, Vol. 15, 2014, pp. 427-434.
[19] Abdelali, H. B., et al., Identification of a Friction Model at the Tool-Chip-Workpiece Interface in Dry Machining of a AISI 1045 Steel with a TiN Coated Carbide Tool, Journal of Tribology, Vol. 133, No. 4, 2011, pp. 042201.
[20] Rech, J., et al., Characterisation of Friction and Heat Partition Coefficients at the Tool-Work Material Interface in Cutting, CIRP Annals, Vol. 62, No. 1, 2013, pp. 79-82.
[21] Chowdhury, M. A., et al., Estimation of the Friction Coefficient in Turning Process of Metals Through Model Experiment, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, Vol. 232, No. 6, 2018, pp. 685-692.
[22] Zhou, L., et al., Energy Consumption Model and Energy Efficiency of Machine Tools: A Comprehensive Literature Review, J. Clean Prod., Vol. 112, No. 5, 2016, pp. 3721-3734.
[23] Gutowski, T., et al., Electrical Energy Requirements for Manufacturing Process. Proceedings of 13th CIRP International Conference on Life Cycle Engineering, 2006, pp. 623-627.
