A

  • A. Molazadeh Kashkouie.Ali Effects of Heat Treatment on the Microstructure, Mechanical Properties and Corrosion Behavior of 2209 Duplex Stainless Steel Parts Manufactured By Wire Arc Additive Manufacturing Process [ Vol.16, Issue 1 - Spring Year 1401]
  • a.ashrafi esfehani [ Vol.7, Issue 3 - Summer Year 1392]
  • a.ashrafi esfehani [ Vol.7, Issue 2 - Summer Year 1392]
  • Abachi.Parvin Characterization of Cu-Yttria Stabilized Zirconia composite produced by Spark Plasma Sintering [ Vol.10, Issue 3 - Autumn Year 1395]
  • abbasi.majid The Effect of Intercritical Annealing Temperature on the Microstructure and Mechanical Properties of Dual-Phase Cast Steel [ Vol.17, Issue 2 - Summer Year 1402]
  • Abbasi.Mehrdad [ Vol.4, Issue 1 - Spring Year 1389]
  • Abbasi.Mehrdad [ Vol.3, Issue 4 - Winter Year 1388]
  • Abbasi.Mohammad In vitro investigation of the GdF3:Bi nanoparticles synthesized via hydrothermal method as the dual MRI-CT contrast agent [ Vol.17, Issue 4 - Winter Year 1402]
  • Abbasi.Mohammad Hasan Study and investigation on the formation of NbAl3-based nanocomposite reinforced by Al2O3 particles: microstructural and thermal analysis investigation [ Vol.12, Issue 2 - Summer Year 1397]
  • Abbasi.Sedigheh Synthesis and characterization of Ag and Cu nanorods and thermal conductivity investigation of nanofluids containing synthesized nanorods [ Vol.10, Issue 4 - Winter Year 1395]
  • abbasi.seyed mahdi Investigation of Dynamic and Static Restoration in Hot Deformation of SP-700 Titanium Alloy [ Vol.13, Issue 2 - Summer Year 1398]
  • abbasi.shahram Investigation the Effect of Microstructure and Crystallographic Texture on the Hydrogen Induced Cracking Resistance of HSLA Steel [ Vol.14, Issue 3 - Autumn Year 1399]
  • Abbasian.Ahmadreza [ Vol.2, Issue 1 - Spring Year 1387]
  • Abdollahpour.Rasoul Investigating the effect of nickel particle size and green density on the properties of NiAl-TiB2-TiC composite produced by combustion synthesis [ Vol.13, Issue 3 - Autumn Year 1398]
  • ABDOLLAHZADEH.AMIN Investigation the effects of SiC reinforcement incorporation on mechanical properties of friction stir welded AZ31 magnesium alloy [ Vol.10, Issue 4 - Winter Year 1395]
  • abedinzadeh.reza Optimization of Effective Parameters in the Stir Friction Extrusion Process on Porosity and Tensile Strength of SiC Ceramic Particles Reinforced AA1050 Aluminum Matrix Composite [ Vol.17, Issue 4 - Winter Year 1402]
  • abouei.vahid Evaluation of anti-corrosion performance of epoxy ester coating in the presence of a new generation of hybrid pigments based on Echium amoenum extract and zinc acetate [ Vol.16, Issue 4 - Winter Year 1401]
  • Adeli.Mandana An investigation on the production of activated carbon from olive stone [ Vol.12, Issue 3 - Autumn Year 1397]
  • Adeli.Mandana Investigating the effect of nickel particle size and green density on the properties of NiAl-TiB2-TiC composite produced by combustion synthesis [ Vol.13, Issue 3 - Autumn Year 1398]
  • afghahi.salman Optimization of mechanical and dielectric properties by controlling densification and microstructure in silicon nitride ceramics prepared by hot pressing method [ Vol.17, Issue 3 - Autumn Year 1402]
  • afghahi.salman Investigation of Microstructural and Mechanical Properties of Tungsten Disulfide (WS2) /Aluminum Matrix Nanocmposite [ Vol.14, Issue 1 - Spring Year 1399]
  • Afsari.Ahmad Similar and dissimilar 5754 and 6063 aluminum alloy joints by friction stir welding [ Vol.10, Issue 2 - Summer Year 1395]
  • Afshari.Alireza Optimization the Mechanical Properties of PVC/n-NBR Blends Using Taguchi Experimental Design Method [ Vol.16, Issue 1 - Spring Year 1401]
  • Afzali Grouh.Mina Influence of pH of Electroplating on Microstructure and Mechanical Properties of Ni-P-Tio2 Composite Coating Fabricated on AISI 430 Steel [ Vol.14, Issue 4 - Winter Year 1399]
  • Aghadavoudi.Farshid Investigation of the Effect of Atomic Structure Defects on the Thermal Expansion Coefficient of Zigzag and Armchair Carbon Nanotubes Using Molecular Dynamics Method [ Vol.16, Issue 2 - Summer Year 1401]
  • Aghajani Derazkola.Hamed Investigation of Microstructure, Hardness and Intermetallic Compound in Friction stir Welding of AA6065 Aluminum Alloy to Copper [ Vol.12, Issue 2 - Summer Year 1397]
  • AGHAKHANI.masood The effect of Al2O3 Nano-particles coated with manganese oxide on the microstructure and mechanical properties of low carbon steel using GMAW process [ Vol.15, Issue 1 - Spring Year 1400]
  • Aghazade.Mustafa One-step synthesis of superparamagnetic iron oxide nanoparticles doped with zinc cations and coated with saccharides for biomedical applications [ Vol.17, Issue 2 - Summer Year 1402]
  • ahangarani.shahrokh Investigation the Effect of Microstructure and Crystallographic Texture on the Hydrogen Induced Cracking Resistance of HSLA Steel [ Vol.14, Issue 3 - Autumn Year 1399]
  • Ahmadi rad.Jaafar Modelling of austenite formation in weld heat affected zone of API-X65 and X70 pipeline steels [ Vol.12, Issue 3 - Autumn Year 1397]
  • ahmadi.ehsan Nitrogen effect on the precipitation of secondary phases and mechanical property of the GTA welded Inconel 718 [ Vol.15, Issue 1 - Spring Year 1400]
  • Ahmadi.Esmaeil Investigation on corrosion and tribological behaviour of plasma electrolytic oxidation coating formed on aluminium hydraulic tappet [ Vol.18, Issue 2 - Summer Year 1403]
  • Ahmadi.Hasan Modeling of Cement-CNT Nanocomposites Mechanical Properties by Micromechanical Method [ Vol.10, Issue 1 - Spring Year 1395]
  • ahmadi.mojtaba Fabrication of YSZ/Al composite coating on Incoloy 825 superalloy using electrophoretic deposition [ Vol.12, Issue 4 - Winter Year 1397]
  • ahmadi.nahid The effect of addition nano boron carbide on the mechanical properties and pressurless sintering of B4C-5% vol TiB2 composites [ Vol.10, Issue 3 - Autumn Year 1395]
  • Ahmadi.Reza Characterization, biological evaluation, and investigation of antibacterial properties of strontium-modified silicate-based bioactive glass in the presence of high amounts of magnesium [ Vol.18, Issue 2 - Summer Year 1403]
  • Ahmadi.Zohre Effect of nanograghite addition on the densification of ZrB2-SiC composites fabricated by spark plasma sintering [ Vol.12, Issue 4 - Winter Year 1397]
  • Ahmadizadeh.Esmaeel Effect of Filler Metal on the Oxidation Resistance of 35Cr-45Ni Alloy Weld Metal [ Vol.17, Issue 1 - Spring Year 1402]
  • Ahmadizadeh.Navid Investigation of the Effect of Applied Current Density on Wetting Properties of Cerium Oxide Coating Fabricated by Electrochemical Deposition Method [ Vol.14, Issue 4 - Winter Year 1399]
  • akbari musavi.ali asghar Investigation of 6061 aluminum alloy pulsed laser welding based on the physical models for prediction of hot cracks [ Vol.13, Issue 3 - Autumn Year 1398]
  • Akbari.Alireza Synthesis and study of the highly effective catalytic activity of the Pt-LaFeO3 nanoparticles supported on polyaniline-chitosan for methanol electro-oxidation [ Vol.13, Issue 4 - Winter Year 1398]
  • Akhbarizadeh.Amin Investigating the effect of different variables on the strength of the electro fusion welded polyethylene pipes [ Vol.9, Issue 4 - Winter Year 1394]
  • Akhbarizadeh.Amin Investigation of the Wear Corrosion and Hot Corrosion Properties of Alumina Coating Applied on Steel Substrate via High Velocity Oxy-Fuel Method [ Vol.10, Issue 1 - Spring Year 1395]
  • Akhbarizadeh.Amin [ Vol.1, Issue 2 - Autumn Year 1386]
  • Akhbarizadeh.Amin [ Vol.7, Issue 3 - Summer Year 1392]
  • Akhbarizadeh.Amin [ Vol.9, Issue 2 - Summer Year 1394]
  • Al Nidawi.Ayat Muayad Lafta Production and characterization of WC-10Co-4Cr-xGr composite coating produced by thermal spraying method [ Vol.18, Issue 1 - Spring Year 1403]
  • Ali Askari Zamanic.Mohammad Carbothermic reduction of nickel oxide [ Vol.13, Issue 2 - Summer Year 1398]
  • Aliabadizadeh.Amirtaymour The effects of temperature and pH on the shape, size, and color of the synthesized nano-plate shape hematite by hydrothermal method [ Vol.16, Issue 4 - Winter Year 1401]
  • Alishahi.Mostafa Using of RSM to optimize the heat treatment of electroless Ni-P coating for simultaneously improvement in corrosion resistance and hardness [ Vol.10, Issue 1 - Spring Year 1395]
  • Alishahi.Mostafa The effect of silicon doping on the mechanical and corrosion properties of tantalum carbide coating deposited by magnetron sputtering technique [ Vol.16, Issue 4 - Winter Year 1401]
  • Alishahi.Mostafa Corrosion behavior of magnetron sputtered tantalum coating [ Vol.12, Issue 2 - Summer Year 1397]
  • Alizadeh.Sara The Effect of Separate and Simultaneous Use of Phosphate, Silicate and Borate Binders on the Physical and Mechanical Properties of Magnesia - Carbon Monolithic Refractories [ Vol.9, Issue 4 - Winter Year 1394]
  • Alliramezani.Reyhane Effect of Temperature, Voltage, Time of Anodizing and Applying Nickel-Phosphor Electro less Coating on Hardness and Corrosion Behavior of 2024 Aluminum Alloy [ Vol.14, Issue 3 - Autumn Year 1399]
  • Amani.Mostafa Synthesis and characterization of hollow mesoporous Silica nanocomposites via polystyrene template [ Vol.14, Issue 1 - Spring Year 1399]
  • Ameri.Elham Bubble absorption enhancement in water-based nanofluids using nickel oxide nanoparticles in the presence of surfactant [ Vol.17, Issue 1 - Spring Year 1402]
  • Ameri.Elham The Effect of Silicon Carbide Ceramic Nanoparticles on the Tribological Properties of SN500HVI Paraffinic Base Oil [ Vol.16, Issue 1 - Spring Year 1401]
  • Amini Najafabadi.Reza The Influence Of additive Erbium on Thermodynamic Behaviors of Aluminum - Zinc Alloys [ Vol.10, Issue 2 - Summer Year 1395]
  • amini.kamran Study of microstructure and tribological properties of NiCrAlY coatings reinforced with Al2O3 particles [ Vol.12, Issue 1 - Spring Year 1397]
  • amini.kamran [ Vol.8, Issue 4 - Winter Year 1393]
  • amini.kamran Evaluating the effect of deep cryogenic heat treatment on microstructure, wear and tension properties of the GOST9HF-steel at tempering temperature from 150 to 650˚C [ Vol.14, Issue 2 - Summer Year 1399]
  • amini.kamran On the use of Response Surface Methodology for Optimization of Scaffold Composite of the Hydroxyapatite and Diopside [ Vol.15, Issue 2 - Summer Year 1400]
  • Amini.Kamran Investigation of hardness and tribological behavior of Al/Al2O3-TiB2 surface nano-camposite It is made by friction machining [ Vol.10, Issue 1 - Spring Year 1395]
  • Amini.Mohammad Investigating the Effect of Poly (D L-Lactic Acid) Molecular Weight on the Shape Memory Parameters: A Molecular Dynamics Study [ Vol.16, Issue 2 - Summer Year 1401]
  • Amini.Reza Anisotropy of Mechanical Properties of Poly Lactic Acid Scaffolds Produced by Fused Deposition Modeling for Bone Tissue Engineering [ Vol.15, Issue 1 - Spring Year 1400]
  • Amiri.Gholam Reza Synthesis of Nickel Ferrite / Cadmium Oxide Compound Nanoparticles by Co-precipitation Method and Investigation its Sensitivity to Formaldehyde [ Vol.14, Issue 3 - Autumn Year 1399]
  • amirzade.majid ساخت الکترودهای ابرخازنیِ نیکل منگنز اکسید (NiMnO3) نانوصفحه‌ای با استفاده از روش سنتز [ Vol.17, Issue 2 - Summer Year 1402]
  • Anghajani.Hossein Studying the Wear Behavior of applied coats on Titanium by Chromium Electroplating and Plasma Nitriding Processes [ Vol.15, Issue 1 - Spring Year 1400]
  • Anghajani.Hossein Fabrication of YSZ/Al composite coating on Incoloy 825 superalloy using electrophoretic deposition [ Vol.12, Issue 4 - Winter Year 1397]
  • Anghajani.Hossein Electrophoretic deposition of SiC nanoparticles [ Vol.10, Issue 3 - Autumn Year 1395]
  • Anghajani.Hossein [ Vol.8, Issue 2 - Summer Year 1393]
  • Anghajani.Hossein Investigation on effect of different parameter on deposition kinetic of SiC coating applied by chemical vapor deposition (CVD) method on carbon-carbon composite [ Vol.10, Issue 1 - Spring Year 1395]
  • Anghajani.Hossein [ Vol.5, Issue 4 - Winter Year 1390]
  • Ansari.Javad Investigation of the Effects of HVOF Process Parameters on the Quality and Wear Properties of the Coating Tungsten Carbide on 4130 Steel [ Vol.16, Issue 2 - Summer Year 1401]
  • Anvari.Sayedeh Zahra TLP Bonding of Al-Al3V Nano Composite and Evaluation of its Properties [ Vol.16, Issue 4 - Winter Year 1401]
  • Anvari.Seyedeh Zahra Evaluation of Photocatalytic and Antibacterial Properties of Zno–Cuo Nanocomposites Synthesized by Sol-Gel Method [ Vol.15, Issue 3 - Autumn Year 1400]
  • Anvari.Seyedeh Zahra TLP Bonding of Al-Al3V Nano Composite and Evaluation of its Properties [ Vol.16, Issue 4 - Winter Year 1401]
  • Arabi.Hosein [ Vol.4, Issue 1 - Spring Year 1389]
  • Arabi.Hosein [ Vol.2, Issue 2 - Summer Year 1387]
  • Arabi.Hosein [ Vol.2, Issue 1 - Spring Year 1387]
  • Arabi.Hosein [ Vol.2, Issue 1 - Spring Year 1387]
  • Araghi.Alireza Characterization of functionally graded hydroxyapatite/TiO2 multilayer coating on Ti-6Al-4V titanium alloy by electrophoretic deposition [ Vol.10, Issue 2 - Summer Year 1395]
  • Araghi.Alireza Wear characterization of different hydroxyapatite based coatings on Ti-6Al-4V titanium alloy by electrophoretic deposition [ Vol.11, Issue 4 - Winter Year 1396]
  • Arastoo.Shahrdad Study catalytic effect of CeO2 nanoparticle on thermal decomposition of ammonium perchlorate [ Vol.12, Issue 1 - Spring Year 1397]
  • arastouei.masoud Preparation and Characterization of Porous Titanium Scaffold Coated with Akermanite [ Vol.11, Issue 2 - Summer Year 1396]
  • asadi asadabad.mohsen A Study on Effect of Processing Parameters on Electrical Conduction and Micro-hardness of Nano-crystalline Cu-5%at Ta Alloy. [ Vol.11, Issue 3 - Autumn Year 1396]
  • Asadi Khanouki.Mohammad Taghi The correlation between fracture surface morphology and toughness/ductility in Zr46(Cu4.5/5.5Ag1/5.5)46Al8 bulk metallic glass [ Vol.13, Issue 2 - Summer Year 1398]
  • Asgari.Nayereh Investigating X-ray diffraction and microstructure analysis of new high entropy alloys TiZrNbXX made by powder metallurgy method [ Vol.18, Issue 2 - Summer Year 1403]
  • Ashorzadeh.Mohammad Reza Investigating the oxidation and electrical behavior of AISI 304 steel coated with cobalt for the application of solid oxide fuel cell [ Vol.14, Issue 1 - Spring Year 1399]
  • Ashrafi.Hamid Finite element simulation of the effect of the second pulse current on temperature distribution and nugget size in resistance spot welding of TRIP1100 steel [ Vol.17, Issue 2 - Summer Year 1402]
  • Ashrafizadeh.F. [ Vol.1, Issue 1 - Summer Year 1386]
  • Ashrafizadeh.F. Modelling and prediction of the yield strength of 6061 aluminum alloy processed by accumulative roll bonding (ARB) [ Vol.12, Issue 3 - Autumn Year 1397]
  • ataei.abolghasem An investigation on the behavior of manganese cobaltite spinel oxide as the SOFC interconnect coating materials [ Vol.11, Issue 4 - Winter Year 1396]
  • azadfalah.marziyeh Enhancing Electrochemical Performance of Super capacitors Electrode Using Nickel-Based Metal-Organic [ Vol.16, Issue 3 - Autumn Year 1401]
  • azimi- yancheshmeh.dannial Investigation on effect of Hafnium addition on electrical and isothermal oxidation resistance of Ni-super alloy using for metallic interconnect of SOFC [ Vol.12, Issue 3 - Autumn Year 1397]
  • Azimifar.Farhad Production and characterization of WC-10Co-4Cr-xGr composite coating produced by thermal spraying method [ Vol.18, Issue 1 - Spring Year 1403]

B

  • Babaei.Alireza An investigation on the behavior of manganese cobaltite spinel oxide as the SOFC interconnect coating materials [ Vol.11, Issue 4 - Winter Year 1396]
  • babaiee.mohammad Mechanical alloying and fabrication of Zn-4Mn fragments produced by SPS method for using in short-term implants [ Vol.16, Issue 4 - Winter Year 1401]
  • Babakhani.Abolfazl [ Vol.9, Issue 2 - Summer Year 1394]
  • Babakhani.Abolfazl [ Vol.9, Issue 3 - Autumn Year 1394]
  • Babakhani.Abolfazl [ Vol.8, Issue 2 - Summer Year 1393]
  • Babakhani.Abolfazl [ Vol.9, Issue 1 - Spring Year 1394]
  • Babakhani.Abolfazl Influence of mechanical alloying and preheating on fabrication of NiTi alloy by combustion synthesis [ Vol.9, Issue 4 - Winter Year 1394]
  • badarloo.mahdi The Synthesis Of Nanocomposites (MoSi2-20% TiC) is activated by chemical Combustion Synthesis Method (COSHS) [ Vol.10, Issue 4 - Winter Year 1395]
  • Baghalzadeh.mojtaba Effect of Protective Behaviour of Biofilm Formed By the Anaerobic Sulfate-Reducing Bacteria on the Corrosion Resistance of the API X42 Microalloyed Steel [ Vol.15, Issue 4 - Winter Year 1400]
  • Baghshahi.Saeed The effects of temperature and pH on the shape, size, and color of the synthesized nano-plate shape hematite by hydrothermal method [ Vol.16, Issue 4 - Winter Year 1401]
  • Baghshahi.Saeed Synthesis of (CZTS) Cu2ZnSnS4 Nanoparticles by Hydrothermal Method for Solar Cell Application [ Vol.15, Issue 2 - Summer Year 1400]
  • Baharvandi.Hamid Reza The effect of addition nano boron carbide on the mechanical properties and pressurless sintering of B4C-5% vol TiB2 composites [ Vol.10, Issue 3 - Autumn Year 1395]
  • baharvandi.hamidreza Comparison the effect of sintering temperature on the synthesis and properties of B4C-TiB2 nanocomposites by sol gel and insitu methods [ Vol.13, Issue 4 - Winter Year 1398]
  • baharvandi.hamze Production of porous TiC preform by the gel casting process in order to synthesize Ti3SiC2 MAX phase via infiltration of preform [ Vol.11, Issue 3 - Autumn Year 1396]
  • Bahrevar.Mohammad Ali Studying the effect of Bi2O3 addition before and after calcination on electrical properties of (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 piezoceramics [ Vol.13, Issue 1 - Spring Year 1398]
  • Bahrololoom.Mohammad Ebrahim Preparation and Investigation of Natural and Biocompatible Chitosan/Magnetite Nonocomposite Pproperties [ Vol.9, Issue 3 - Autumn Year 1394]
  • Bahrololoom.Mohammad Ebrahim [ Vol.2, Issue 3 - Autumn Year 1387]
  • Bahrololoom.Mohammad Ebrahim Investigating the morphology and nanostructure of Ni-Fe alloy coatings prepared by electrodeposition [ Vol.10, Issue 1 - Spring Year 1395]
  • Bakhsheshi Rad.Hamid Reza Investigation of Optimal Milling Conditions in the Production of Mg-3Zn-1Mn Nanocomposite [ Vol.16, Issue 1 - Spring Year 1401]
  • Bakhsheshi-Rad.Hamid Reza Effect of Graphene Oxide Addition on the Behavior of Tribological Properties of Coatings Prepared on Magnesium Alloy AZ31 by Plasma Electrolytic Oxidation Method [ Vol.16, Issue 3 - Autumn Year 1401]
  • Bakhshizade.Elham Effect of Graphite on the Mechanical Properties and Tribological Behavior of Aluminum Matrix ‎Nanocomposite [ Vol.18, Issue 1 - Spring Year 1403]
  • Bakhtiari.Hamid Effect of heat treatment on microstructure and mechanical properties of explosively bonded 321 Stainless steel to 1230 aluminum interface [ Vol.9, Issue 4 - Winter Year 1394]
  • BAKHTIARI.HAMID Investigation of the effect of thermal treatment after welding on the corrosion properties of the interconnecting joint wall of Cu / SS 304 sheets [ Vol.17, Issue 4 - Winter Year 1402]
  • Baradaran Mahdavi.Amir Ebrahim Synthesis, Identification and Application of Polyacrylamide Polystyrene/Bentonite Nanocomposite for Adsorbing of Lead and Cadmium from Contaminated Water [ Vol.13, Issue 4 - Winter Year 1398]
  • Barzgar.Faeze An investigation of the effect of sintering condition on the strength of Ni foam produced by electroplating method [ Vol.12, Issue 3 - Autumn Year 1397]
  • bavarsiha.fatemeh Fabrication of micro-structure of the Fe3O4 / SiO2 / TiO2 core / shell / shell and investigation of its structural properties [ Vol.11, Issue 4 - Winter Year 1396]
  • bavarsiha.fatemeh Synthesis and Characterization of SrFe12O19/SiO2/TiO2 Composite Powder with Core/Shell/Shell Nanostructure [ Vol.12, Issue 3 - Autumn Year 1397]
  • Bayati.Abbas Effect of hot rolling and heat treatment on anisotropy properties of Mg alloy LZ71 [ Vol.14, Issue 1 - Spring Year 1399]
  • Bazargan Lari.Reza Preparation and Investigation of Natural and Biocompatible Chitosan/Magnetite Nonocomposite Pproperties [ Vol.9, Issue 3 - Autumn Year 1394]
  • Bazargan Lari.Reza Comparison of Corrosion behavior of aluminium 6061 alloy joined by friction stir lap welding and gas tungsten arc lap welding methods [ Vol.10, Issue 2 - Summer Year 1395]
  • Bazargan Lari.Reza Applying Nanocomposite Ni-B-ZrO2 Coating By Electroless Method on Steel CK45 and Study its Tribological Properties [ Vol.10, Issue 4 - Winter Year 1395]
  • Behzadineghad.Arash Effects of alumina nanoparticles, number of stirring pass and rotational speed on the mechanical behavior of friction stir welded (FSW) magnesium alloy (AM60) [ Vol.16, Issue 4 - Winter Year 1401]
  • Besharati-Seidani.Abbas Applying of highly Ultraviolet reflective materials on cotton- nylon 66 fabric for camouflage of military targets in snowy areas [ Vol.11, Issue 1 - Spring Year 1396]
  • Beyhaghi.Maryam Investigation of influences of mechanical activation and heating rate on nanostructured NiAl-Al2O3 composites formation by combustion synthesis [ Vol.11, Issue 2 - Summer Year 1396]
  • Bigham.Ashkan Synthesis and characterization of mesoporous magnesium silicate for controlled release drug applications [ Vol.12, Issue 1 - Spring Year 1397]
  • Biranvand.khadijeh Kinetics of Carbothermic Reduction of Molybdenite in the Presence of Magnesium Oxide [ Vol.14, Issue 2 - Summer Year 1399]
  • Bozorg.Mansoor Application of Myrtus Extracts as a Suitable Green Inhibitor for Corrosion of Steel in HCl Solution [ Vol.11, Issue 4 - Winter Year 1396]

C

  • chaichi.mohammad javad Green Synthesis of Fe3O4/SiO2/ZnMn2O4 Nanocomposite by AleoVera Extract and its Application as a Catalyst in Luminol-H2O2 Chemiluminescence [ Vol.14, Issue 3 - Autumn Year 1399]
  • Charkhi.Amir Evaluating the Effective Parameters in the Zircon Alkali Decomposition Process and Determining the Optimal Operating Conditions for Zirconium Extraction [ Vol.15, Issue 3 - Autumn Year 1400]
  • chizari.erfan Mechanical alloying and fabrication of Zn-4Mn fragments produced by SPS method for using in short-term implants [ Vol.16, Issue 4 - Winter Year 1401]

D

  • Dabbagh.Gholamreza Effect of geometry of laser surface texture and droplet volume on contact angle with Ti6Al4V substrate [ Vol.17, Issue 3 - Autumn Year 1402]
  • Dabiri.Rahim [ Vol.9, Issue 1 - Spring Year 1394]
  • dadashian.saeideh Fabrication of micro-structure of the Fe3O4 / SiO2 / TiO2 core / shell / shell and investigation of its structural properties [ Vol.11, Issue 4 - Winter Year 1396]
  • Dadoo.Ali Pulsed laser surface melting of AISI H13 steel and investigating the effect of TiC powder particle size and concentration on the morphology of MC carbides in the composite coating [ Vol.13, Issue 3 - Autumn Year 1398]
  • Dahaghin.Hamid Influence of Heat Treatment on Microstructure and Mechanical Properties of HVOF Sprayed Cr3C2-NiCr Coating [ Vol.14, Issue 4 - Winter Year 1399]
  • Daliri Joupari.Morteza Preparation and evaluation of physical and cellular activity properties of poly (L-lactic acid)/ heparinized multiwall carbon nanotube nanocomposite films for application in nerve regeneration [ Vol.12, Issue 3 - Autumn Year 1397]
  • Daneshmand.Saeed The Effect of Electrical Discharge Machining Parameters On 2024 Aluminum-Based Composite Material Using Calculation and Analysis of the Total Normalized Quality Loss and Signal-to-Noise Analysis [ Vol.11, Issue 1 - Spring Year 1396]
  • Daneshmand.Saeed The Investigation of the Corrosion Resistance of Al/Alumina Composites Fabricated Via ARB Process [ Vol.16, Issue 3 - Autumn Year 1401]
  • Daneshmand.Saeed Electrical Discharge Machining of Aluminum Matrix Composite Reinforced With Titanium Oxide Nano-Particles [ Vol.13, Issue 2 - Summer Year 1398]
  • Daneshmanesh.Habib [ Vol.9, Issue 3 - Autumn Year 1394]
  • Daneshmanesh.Habib Friction Stir Welding of Ultrafine-Grained Al 1050: Investigation of Pin Geometry, Welding Atmosphere Temperature and Welding Speeds on the Mechanical Properties [ Vol.16, Issue 2 - Summer Year 1401]
  • Darivandpour.Mahyar Correlation of Microstructure with Mechanical Behavior of HSLA-100 Weld Metal Produced By GTAW Method [ Vol.15, Issue 3 - Autumn Year 1400]
  • Davazdah Emami.Mohammad Low Temperature CO Sensor Based on PEDOT:PSS/Fe(II)(salen) Composite Thin Film [ Vol.12, Issue 1 - Spring Year 1397]
  • Davoodi Jamaloei.Akbar The effect of homogenization on the microstructure and mechanical properties of transient liquid phase bonding between Inconel 718 and Inconel 600 [ Vol.11, Issue 3 - Autumn Year 1396]
  • Davoodi.anial Fabrication of Ni-VC Nano composite powder from oxide reactants by mechanochemical method [ Vol.12, Issue 4 - Winter Year 1397]
  • Davoodi.anial Fabrication and investigation mechanical properties of Aluminum 7014 / alumina Nano composite powder by mechanical alloying [ Vol.9, Issue 4 - Winter Year 1394]
  • Davoodi.Danial Fabrication and investigation mechanical properties of Aluminum 7014 / alumina Nano composite powder by mechanical alloying [ Vol.9, Issue 4 - Winter Year 1394]
  • Dehghani.Amirsalar Evaluation of anti-corrosion performance of epoxy ester coating in the presence of a new generation of hybrid pigments based on Echium amoenum extract and zinc acetate [ Vol.16, Issue 4 - Winter Year 1401]
  • Dehghani.Amirsalar Phase, microstructure characterization and hardening efficiency of SKS3 tool steel laser surface hardened by a high-power diode laser [ Vol.17, Issue 2 - Summer Year 1402]
  • Dehghani.Kamran Fracture toughness and plasticity evaluation of sputter deposited tantalum nitride thin film [ Vol.13, Issue 1 - Spring Year 1398]
  • Dehghani.KAMRAN Study the microstructure and hardness of FSW of API 70 steel at the presence of TiO2 particles [ Vol.12, Issue 3 - Autumn Year 1397]
  • Dehghani.Pouria Optimization of mechanical and dielectric properties by controlling densification and microstructure in silicon nitride ceramics prepared by hot pressing method [ Vol.17, Issue 3 - Autumn Year 1402]
  • Dehghanian.Changiz Synthesis of Nickel-Nickel oxide foam by electrochemical method and its application in supercapacitor [ Vol.13, Issue 2 - Summer Year 1398]
  • Dehmolaei.Reza Correlation of Microstructure with Mechanical Behavior of HSLA-100 Weld Metal Produced By GTAW Method [ Vol.15, Issue 3 - Autumn Year 1400]
  • Dehnavi.Armin Influence of SiC particles on hot deformation behavior of closed cell Al/SiCp foam [ Vol.12, Issue 2 - Summer Year 1397]
  • dehnavi.mehdi Effect of Cooling Rate and Copper Content on the Non-Equilibrium Eutectic Formation in Binary Al-Cu Alloys by Computer- Aided Cooling Curve Method [ Vol.10, Issue 2 - Summer Year 1395]
  • Dost- mohammadi.Ali Preparation and Characterization of Porous Titanium Scaffold Coated with Akermanite [ Vol.11, Issue 2 - Summer Year 1396]

E

  • ebrahimi.Golamreza [ Vol.9, Issue 3 - Autumn Year 1394]
  • ebrahimi.H. Synthesis of Nickel Ferrite / Cadmium Oxide Compound Nanoparticles by Co-precipitation Method and Investigation its Sensitivity to Formaldehyde [ Vol.14, Issue 3 - Autumn Year 1399]
  • ebrahimi.H. Copper manganese ferrite nanoparticles production via co precipitation method and study of its sensitivity property for ethanol detection [ Vol.11, Issue 4 - Winter Year 1396]
  • Ebrahimi.Ramin Investigation of the Size Effect in Compression Test by Combined Hill-Taylor Theory [ Vol.15, Issue 2 - Summer Year 1400]
  • Ebrahimi.Ramin Investigation of Electrochemical and Mechanical Properties of Solid Oxide Fuel Cell Fabrication by 3d Printer [ Vol.16, Issue 2 - Summer Year 1401]
  • Ebrahimic.hamidreza Synthesis of Cadmium Doped Nickel Copper Ferrite Nanoparticles and Investigation of Their Sensing Properties for the Detection of Acetonitrile in Little Accounts [ Vol.15, Issue 3 - Autumn Year 1400]
  • Ebrahimic.hamidreza Theoretical and experimental study of Imidazolium Ionic Liquid Effect on the Corrosion Inhibition of 316-Stainless Steel, Using Electrochemical Test Methods and Quantum Mechanics Theories [ Vol.12, Issue 1 - Spring Year 1397]
  • Ebrahimic.hamidreza Synthesis of Mg0.5Zn0.5Fe2O4 nanoparticles via co-precipitation method and study of its sensitivity properties [ Vol.10, Issue 4 - Winter Year 1395]
  • Ebrahimic.hamidreza Characterization of Electro Synthesized Perovskites Structured Ybmno3 Nanoparticles [ Vol.15, Issue 4 - Winter Year 1400]
  • Ebrahimifar.Hadi Influence of pH of Electroplating on Microstructure and Mechanical Properties of Ni-P-Tio2 Composite Coating Fabricated on AISI 430 Steel [ Vol.14, Issue 4 - Winter Year 1399]
  • Ebrahimifar.Hadi Investigating the oxidation and electrical behavior of AISI 304 steel coated with cobalt for the application of solid oxide fuel cell [ Vol.14, Issue 1 - Spring Year 1399]
  • Ebrahimi-Kahrizsangi.Reza Investigation of kinetics behavior high temperature isotherm oxidation MCrAlY coatings applied by HVOF method [ Vol.10, Issue 3 - Autumn Year 1395]
  • Ebrahimi-Kahrizsangi.Reza Effect of Tool Rotation Speed on the Mechanical Properties and Corrosion Behavior of Dissimilar Friction Stir Welded of 5083 Aluminium Alloy and Commercially Pure Titanium [ Vol.11, Issue 4 - Winter Year 1396]
  • ebrahimzadeh.hossain Investigation of 6061 aluminum alloy pulsed laser welding based on the physical models for prediction of hot cracks [ Vol.13, Issue 3 - Autumn Year 1398]
  • Ebrahimzadeh.Iman [ Vol.9, Issue 2 - Summer Year 1394]
  • Ebrahimzadeh.Iman Evaluation of Microstructure and Mechanical Properties of Friction Stir Lap Welded 6061 Aluminium Alloy at various welding speeds [ Vol.10, Issue 2 - Summer Year 1395]
  • edris.hossein Fabrication of in situ Al-Ni surface composite on 2024 aluminum alloy by friction stir processing [ Vol.10, Issue 3 - Autumn Year 1395]
  • Eftekhari.Seyed Ali Optimization of Effective Parameters in the Stir Friction Extrusion Process on Porosity and Tensile Strength of SiC Ceramic Particles Reinforced AA1050 Aluminum Matrix Composite [ Vol.17, Issue 4 - Winter Year 1402]
  • Ehsani.Ali Theoretical and experimental study of Imidazolium Ionic Liquid Effect on the Corrosion Inhibition of 316-Stainless Steel, Using Electrochemical Test Methods and Quantum Mechanics Theories [ Vol.12, Issue 1 - Spring Year 1397]
  • Ehsani.Ali Characterization of Electro Synthesized Perovskites Structured Ybmno3 Nanoparticles [ Vol.15, Issue 4 - Winter Year 1400]
  • Ehsani.Naser [ Vol.9, Issue 2 - Summer Year 1394]
  • Ehsani.Naser [ Vol.5, Issue 3 - Autumn Year 1390]
  • Ehsani.Naser The role of graphite substrate on the formation of C/SiC gradient structure during pack cementation process [ Vol.10, Issue 1 - Spring Year 1395]
  • Ekrami-Kakhki.Mehri-Saddat Synthesis and study of the highly effective catalytic activity of the Pt-LaFeO3 nanoparticles supported on polyaniline-chitosan for methanol electro-oxidation [ Vol.13, Issue 4 - Winter Year 1398]
  • Elyasi.Majid [ Vol.9, Issue 3 - Autumn Year 1394]
  • Emadi.Rahmatollah Studying the effects of Sodium tripoly phosphates, Sodium hexameta phosphates, Boric acid and Borax on physical properties and low tempreture strenth by product magnesite composition [ Vol.10, Issue 1 - Spring Year 1395]
  • Emadi.Rahmatollah Investigation the causes of corrosion and failure of the submerged entry nozzle for continuous casting of steel [ Vol.10, Issue 2 - Summer Year 1395]
  • Emami.Hosein Production of cupper manganese ferrite cadmium doped nanoparticles via co precipitation method and study of its sensitivity property for methane gas detection in telecommunications centers [ Vol.13, Issue 2 - Summer Year 1398]
  • Emami.Hosein Synthesis of Cadmium Doped Nickel Copper Ferrite Nanoparticles and Investigation of Their Sensing Properties for the Detection of Acetonitrile in Little Accounts [ Vol.15, Issue 3 - Autumn Year 1400]
  • Emami.S.A. Fabrication of Ni-VC Nano composite powder from oxide reactants by mechanochemical method [ Vol.12, Issue 4 - Winter Year 1397]
  • Emami.Seyyed Mohsen Spark Plasma Sintering of ZrB2–SiC–ZrC Nanocomposit Synthesized by MASPS [ Vol.14, Issue 2 - Summer Year 1399]
  • Emamian.Minasadt The effect of silicon doping on the mechanical and corrosion properties of tantalum carbide coating deposited by magnetron sputtering technique [ Vol.16, Issue 4 - Winter Year 1401]
  • Emsaki.Mehdi Synthesis and study of photocatalytic properties of ZnO nanoparticles by the addition of ZnWO4 [ Vol.13, Issue 4 - Winter Year 1398]
  • Enayati.M.H. Synthesis and characterization of (Fe,Ti)3Al-Al2O3 nanocomposite via Fe2O3 reduction by Al [ Vol.11, Issue 2 - Summer Year 1396]
  • Esfandeh.Masoud Synthesis and Characterization of polyurethane/silver nanocomposite by Microwave assisted [ Vol.12, Issue 4 - Winter Year 1397]
  • Eshaghi.Akbar Microstructure and Ablation Resistance of ZrC Coating Prepared by Atmospheric Plasma Spraying (APS) and Solid Shielding/ Shrouded Plasma Spraying (SSPS) Methods on SiC-Coated Graphite [ Vol.15, Issue 4 - Winter Year 1400]
  • Eslami.Abbas Green Synthesis of Fe3O4/SiO2/ZnMn2O4 Nanocomposite by AleoVera Extract and its Application as a Catalyst in Luminol-H2O2 Chemiluminescence [ Vol.14, Issue 3 - Autumn Year 1399]
  • eslami.mojtaba Magnetite -silica-quantum dot carbon nano composite to use in melatonin drug delivery [ Vol.17, Issue 3 - Autumn Year 1402]
  • Eslamian.Payam The effect of temperature of equal- chanel angular pressing process on mechanical properties and biocompatibility of titanium dental implant [ Vol.13, Issue 3 - Autumn Year 1398]
  • Esmaeili.Hamideh Coating of Steel by Long Alkyd Resin Reinforced with SiC Nanoparticles to Improve its Corrosion Resistance [ Vol.11, Issue 2 - Summer Year 1396]
  • esmaeilzaei.azar An investigation on the effect of fuel to oxidizer ratio on the structural properties of (Fe, Mn, Ni, Co, Cr)3O4 high entropy oxide [ Vol.18, Issue 2 - Summer Year 1403]
  • esmaili.sadeq Effect of Graphene Oxide Addition on the Behavior of Tribological Properties of Coatings Prepared on Magnesium Alloy AZ31 by Plasma Electrolytic Oxidation Method [ Vol.16, Issue 3 - Autumn Year 1401]
  • esmailian.mohammad Investigation the Effect of Microstructure and Crystallographic Texture on the Hydrogen Induced Cracking Resistance of HSLA Steel [ Vol.14, Issue 3 - Autumn Year 1399]
  • Esmailian.Mohammad Investigation on effect of Hafnium addition on electrical and isothermal oxidation resistance of Ni-super alloy using for metallic interconnect of SOFC [ Vol.12, Issue 3 - Autumn Year 1397]
  • Etesami.Seyed Mohsen Production of cupper manganese ferrite cadmium doped nanoparticles via co precipitation method and study of its sensitivity property for methane gas detection in telecommunications centers [ Vol.13, Issue 2 - Summer Year 1398]

F

  • Farahbakhsh.Iman Investigation of the Ways of Purification of Apatite Stone and Its using in the Ceramic Glazes [ Vol.10, Issue 1 - Spring Year 1395]
  • Farbodi.Maryam Preparation of polystyrene – multi walled carbon nanotube nanocomposite with improved mechanical properties using response surface methodology [ Vol.10, Issue 3 - Autumn Year 1395]
  • Farbodi.Maryam [ Vol.9, Issue 3 - Autumn Year 1394]
  • Farhang Laleh.Farhad Studying the Wear Behavior of applied coats on Titanium by Chromium Electroplating and Plasma Nitriding Processes [ Vol.15, Issue 1 - Spring Year 1400]
  • farhangi.hassan Effect of Aging Time on Microstructure and Mechanical Properties of IN617 Superalloy at 900 °C [ Vol.16, Issue 2 - Summer Year 1401]
  • farhangi.hassan Investigation of 6061 aluminum alloy pulsed laser welding based on the physical models for prediction of hot cracks [ Vol.13, Issue 3 - Autumn Year 1398]
  • Farnia.Amirreza Phase, microstructure characterization and hardening efficiency of SKS3 tool steel laser surface hardened by a high-power diode laser [ Vol.17, Issue 2 - Summer Year 1402]
  • Farrokhpour.Hossein The effect of manganese (III) acetylacetonate nano coating on the mechanism of thermal decomposition of ammonium perchlorate [ Vol.14, Issue 2 - Summer Year 1399]
  • Farrokhpour.Hossein Study of the catalytic activity of nano-coating CuC2O4 on tne thermodynamic parameters of thermal decomposition of ammonium perchlorate [ Vol.11, Issue 4 - Winter Year 1396]
  • fathi.Mohammad Hossein [ Vol.9, Issue 3 - Autumn Year 1394]
  • fathi.Mohammad Hossein [ Vol.9, Issue 3 - Autumn Year 1394]
  • Fazel.Mahmoud Evaluation of Photocatalytic and Antibacterial Properties of Zno–Cuo Nanocomposites Synthesized by Sol-Gel Method [ Vol.15, Issue 3 - Autumn Year 1400]
  • Firouzabadi.Siavash Fracture toughness and plasticity evaluation of sputter deposited tantalum nitride thin film [ Vol.13, Issue 1 - Spring Year 1398]
  • Forati Rad.Hamzeh Production of porous TiC preform by the gel casting process in order to synthesize Ti3SiC2 MAX phase via infiltration of preform [ Vol.11, Issue 3 - Autumn Year 1396]
  • Forati Rad.Hamzeh One-step synthesis of superparamagnetic iron oxide nanoparticles doped with zinc cations and coated with saccharides for biomedical applications [ Vol.17, Issue 2 - Summer Year 1402]

G

  • Ganjovi.A. Numerical simulation of thermal plasma spray [ Vol.9, Issue 4 - Winter Year 1394]
  • gavahian.mohammad Evaluation the Effect of Heat Treatment on Solidification Structure Segregation and Mechanical Properties of Inconel 625 in the Additive Manufacturing Process by DLMD Method [ Vol.18, Issue 1 - Spring Year 1403]
  • Gavahian.Mohammad Investigation of adding Cr2O3 on mechanical properties and high temperature oxidation behavior of Stellit6 coating prepared by plasma spraying on IN-738 [ Vol.11, Issue 1 - Spring Year 1396]
  • Ghadi.Aliakbar Investigation of the effect of substrate on formation of chromium- and vanadium carbide coatings by thermal reactive diffusion [ Vol.12, Issue 2 - Summer Year 1397]
  • Ghalamzan.Ali Investigation of iron effect on synthesis of Si3N4 by using carbothermal reduction and nitridation process from MCM-48/Saccharose precursor [ Vol.9, Issue 4 - Winter Year 1394]
  • Ghalamzan.Ali Investigation of Sodium effect on synthesis of Si3N4 by using carbothermal reduction and nitridation process from MCM-48/Saccharose precursor [ Vol.10, Issue 1 - Spring Year 1395]
  • Ghanbari Haghighi.Mohsen Effect of Interlayer Type on Mechanical Properties and Microstructure of the 6061 Aluminum Alloy Joint by Friction Stir Welding [ Vol.14, Issue 4 - Winter Year 1399]
  • gharavi.farhad [ Vol.2, Issue 1 - Spring Year 1387]
  • gharavi.farhad [ Vol.2, Issue 2 - Summer Year 1387]
  • gharavi.farhad Effect of Shoulder Surface Angle of Tool on Joint Properties in Friction Stir Welding of 5052 Aluminium Alloy [ Vol.11, Issue 3 - Autumn Year 1396]
  • gharavi.farhad Evaluation of Microstructure and Mechanical Properties of Friction Stir Lap Welded 6061 Aluminium Alloy at various welding speeds [ Vol.10, Issue 2 - Summer Year 1395]
  • ghasemi piranlu.fardin Fabrication of micro-structure of the Fe3O4 / SiO2 / TiO2 core / shell / shell and investigation of its structural properties [ Vol.11, Issue 4 - Winter Year 1396]
  • Ghasemi.Ali Substitution of Zinc Cation in Nickel Ferrite Synthesized by Sol-Gel Method and Evaluation of its Effect on Microwave Absorption, Structural and Magnetic Properties [ Vol.14, Issue 3 - Autumn Year 1399]
  • Ghasemi.Behzad Comparison of Isothermal Oxidation and Thermal Shock Properties of CoNiCrAlY Coating Sprayed by Atmospheric Plasma Spray and Nitrogen Gas Shrouded Plasma Spray Methods [ Vol.16, Issue 1 - Spring Year 1401]
  • Ghasemi.Rasol Investigation of the Tempering Treatment on the Mechanical Propertiesof 13%Cr Super Martensitic Stainless Steel [ Vol.10, Issue 1 - Spring Year 1395]
  • Ghasemi.Reza Influence of Heat Treatment on Microstructure and Mechanical Properties of HVOF Sprayed Cr3C2-NiCr Coating [ Vol.14, Issue 4 - Winter Year 1399]
  • ghasemi-kahrizsangi.salman Effect of Nano- sized Fe2O3 on Microstructure and Hydration Resistance of MgO-CaO Refracrories [ Vol.10, Issue 2 - Summer Year 1395]
  • Ghasemzade.Malihe An Investigation of the Simultaneous Effect of Shot Peening and Baking on the Tensile Behavior of 50crv4 Alloy Steel [ Vol.15, Issue 4 - Winter Year 1400]
  • Ghayour.Hamid Coating ZnO nanowires on gold interdigitated array electrodes and investigating the functioning of alcoholic nano gas sensors [ Vol.10, Issue 2 - Summer Year 1395]
  • Ghayour.Hamid [ Vol.9, Issue 1 - Spring Year 1394]
  • Ghayour.Hamid [ Vol.9, Issue 1 - Spring Year 1394]
  • Ghayour.Hamid Optimization of pulsed GTAW for hard facing on St37 based with Nob73G2 filler metal [ Vol.10, Issue 1 - Spring Year 1395]
  • Ghezel Ayagh,.mohammad hossein Analysis of the effect of molybdenum and cobalt additives on the structural and electrical properties of PZT5 piezoceramic material [ Vol.17, Issue 4 - Winter Year 1402]
  • Ghobadi.Nader ساخت الکترودهای ابرخازنیِ نیکل منگنز اکسید (NiMnO3) نانوصفحه‌ای با استفاده از روش سنتز [ Vol.17, Issue 2 - Summer Year 1402]
  • Gholami.samira Synthesis and Characterization of SrFe12O19/SiO2/TiO2 Composite Powder with Core/Shell/Shell Nanostructure [ Vol.12, Issue 3 - Autumn Year 1397]
  • Gholamipour.Reza Effect of substrate temperature on structural and physical properties of carbon thin films prepared by ion beam sputtering deposition method [ Vol.11, Issue 4 - Winter Year 1396]
  • Gholamipour.Reza Phase transformations during high temperature brazing of dissimilar bonding of IN738 to TiAl intermetallic compound using Ni-Si-B ternary filler alloy [ Vol.15, Issue 1 - Spring Year 1400]
  • Gholampour.Mahdi Investigating optical properties, morphology and size of silver nanoparticles prepared by nanosecond Nd:YAG laser in liquid [ Vol.18, Issue 2 - Summer Year 1403]
  • Gholamrezapor.Ensieh Green Synthesis of Fe3O4/SiO2/ZnMn2O4 Nanocomposite by AleoVera Extract and its Application as a Catalyst in Luminol-H2O2 Chemiluminescence [ Vol.14, Issue 3 - Autumn Year 1399]
  • Ghomi.Hamed Fabrication and evaluation of (chitosan / poly-vinyl-pyrrolidone) scaffold properties containing gum tragacanth by freeze-drying method [ Vol.14, Issue 1 - Spring Year 1399]
  • Golab.Jvad Using of RSM to optimize the heat treatment of electroless Ni-P coating for simultaneously improvement in corrosion resistance and hardness [ Vol.10, Issue 1 - Spring Year 1395]
  • Golabi.Said Characterization of Thermal and Structural Properties of Poly Lactic Acid Parts Fabricated By Fused Depositing Modeling [ Vol.15, Issue 4 - Winter Year 1400]
  • Golestanian.Hossein Investigation of the Effect of Atomic Structure Defects on the Thermal Expansion Coefficient of Zigzag and Armchair Carbon Nanotubes Using Molecular Dynamics Method [ Vol.16, Issue 2 - Summer Year 1401]
  • Golestanipour.Masoud Influence of SiC particles on hot deformation behavior of closed cell Al/SiCp foam [ Vol.12, Issue 2 - Summer Year 1397]
  • Golestanipour.Masoud [ Vol.9, Issue 2 - Summer Year 1394]
  • Golestanipour.Masoud [ Vol.9, Issue 3 - Autumn Year 1394]
  • Golozar.Mohammad Ali The effects of deposition variable on the pulse electrodeposition FeNi-WC nanostructure composite [ Vol.10, Issue 3 - Autumn Year 1395]
  • Golozar.Mohammad Ali [ Vol.1, Issue 2 - Autumn Year 1386]
  • Golozar.Mohammad Ali The Effects of Current Density and pH on the Electrode position of Fe-Ni Alloy and Efficiency Parameters [ Vol.9, Issue 4 - Winter Year 1394]
  • Goodarzi.Massoud Evolution of the Microstructure and Mechanical Properties of Friction Stir Welded Ferrite-Martensite DP700 Dual Phase Steel [ Vol.14, Issue 4 - Winter Year 1399]
  • Goodarzi.Massoud Nitrogen effect on the precipitation of secondary phases and mechanical property of the GTA welded Inconel 718 [ Vol.15, Issue 1 - Spring Year 1400]

H

  • hadad sabzevar.Mohsen Investigation of solidification mechanism and microstructure of semi-solid as cast A380 part with swarf additions injected by diecast machine [ Vol.13, Issue 3 - Autumn Year 1398]
  • Hadavi.Seyed Mohammad Mahdi Synthesis of Lanthanum Hexaaluminate (LaMgAl11O19) Powder in order to plasma spary coating on the nickel superalloy as Thermal Barrier coating [ Vol.12, Issue 3 - Autumn Year 1397]
  • Hadavi.Seyed Mohammad Mehdi Synthesis and Characterization of polyurethane/silver nanocomposite by Microwave assisted [ Vol.12, Issue 4 - Winter Year 1397]
  • hadi.hamid Characterization of Electro Synthesized Perovskites Structured Ybmno3 Nanoparticles [ Vol.15, Issue 4 - Winter Year 1400]
  • Hadian.Hooman Investigation of solidification mechanism and microstructure of semi-solid as cast A380 part with swarf additions injected by diecast machine [ Vol.13, Issue 3 - Autumn Year 1398]
  • Hajeb.Mohammad Evaluation of Photocatalytic and Antibacterial Properties of Zno–Cuo Nanocomposites Synthesized by Sol-Gel Method [ Vol.15, Issue 3 - Autumn Year 1400]
  • Hajeb.Mohammad TLP Bonding of Al-Al3V Nano Composite and Evaluation of its Properties [ Vol.16, Issue 4 - Winter Year 1401]
  • HajHosseini.Mohammad Javad Investigation and Optimization of the Effect of Input Parameters on Material Removal Rate, Tool Wear Rate, and Surface Roughness in Electrical Discharge Machining of A356 Nano-Composite Reinforced By Alumina [ Vol.16, Issue 3 - Autumn Year 1401]
  • Hajian Heidary.Mostafa Efect of temperature on microstructure and intermetallic compound formation of Diffusion Bonded Mg/Al joints [ Vol.14, Issue 1 - Spring Year 1399]
  • Hajiannia.I. Finite element simulation of the effect of the second pulse current on temperature distribution and nugget size in resistance spot welding of TRIP1100 steel [ Vol.17, Issue 2 - Summer Year 1402]
  • hajiannia.iman ارزیابی خواص مکانیکی جوش های غیر مشابه فولاد زنگ نزن AISI 347 به فولاد کم آلیاژ ASTM A335 [ Vol.12, Issue 2 - Summer Year 1397]
  • Hajiloo.Mohamad Investigating the effect of temperature and time of fusing process on the microstructure and wear performance of plasma sprayed NiCrBSi coatings [ Vol.13, Issue 2 - Summer Year 1398]
  • Hajisafari.Mahmoud Effect of plasma electrolytic oxidation time on the corrosion behavior of Ti-13Nb-13Zr alloy in Ringer's solution [ Vol.11, Issue 2 - Summer Year 1396]
  • Hashemi.Babak Synthesis of Ag doped ZnO nanoparticles by Pechini sol-gel method and investigation of their photocatalytic properties [ Vol.12, Issue 4 - Winter Year 1397]
  • Hashemi.Babak Synthesis of Zinc Ferrite Ferrofluid and Investigation of its Rheology and Magnetic Properties [ Vol.16, Issue 1 - Spring Year 1401]
  • Hashemi.Seyed Mahdi Improvement in fracture toughness and wear resistance of plasma-sprayed chromia coating by addition of YSZ nanoparticles [ Vol.14, Issue 3 - Autumn Year 1399]
  • HashemiBani.Batoul [ Vol.9, Issue 3 - Autumn Year 1394]
  • hasheminia.s Investigation of the factors affecting the foam ability of SiO2-Al2O3-MgO-CaO glass [ Vol.11, Issue 3 - Autumn Year 1396]
  • hasheminia.s [ Vol.1, Issue 3 - Autumn Year 1386]
  • Hashemipour Zavareh.Seyyedeh Ghazaleh Preparation of Magnetic Nano Composite Modified with Orange Peel for Adsorption of Vitamin B5 from Aqueous Solution [ Vol.16, Issue 2 - Summer Year 1401]
  • Hassanisadi.Mostafa Investigating the sensing properties of SnO2-PdPt nanohybrid toward methane gas and effect of adding reduced graphene oxide on improving its sensing performance [ Vol.13, Issue 2 - Summer Year 1398]
  • Hassanzadeh Nemati.Nahid Mechanical alloying and fabrication of Zn-4Mn fragments produced by SPS method for using in short-term implants [ Vol.16, Issue 4 - Winter Year 1401]
  • Hassanzadeh Nemati.Nahid Effect of geometry of laser surface texture and droplet volume on contact angle with Ti6Al4V substrate [ Vol.17, Issue 3 - Autumn Year 1402]
  • Hassanzadeh Tabrizi.S.A. Investigation of Nitride Bonding Fomation on Phase analysis, Microstructure and Mechanical Properties,of MgO-C Refractories [ Vol.11, Issue 1 - Spring Year 1396]
  • Hassanzadeh Tabrizi.S.A. Effect of pH on the adsorption properties of zinc oxide-cadmium oxide nanoparticles for removal of methyl blue and methyl orange [ Vol.11, Issue 1 - Spring Year 1396]
  • Hassanzadeh.S.A. Precipitation synthesis and luminescence properties of MgAl2O4 nanoparticles doped with samarium [ Vol.12, Issue 2 - Summer Year 1397]
  • Hassanzadeh-Tabrizi.Sayed Ali [ Vol.9, Issue 3 - Autumn Year 1394]
  • Hassanzadeh-Tabrizi.Sayed Ali Synthesis and study of photocatalytic properties of ZnO nanoparticles by the addition of ZnWO4 [ Vol.13, Issue 4 - Winter Year 1398]
  • Hayati.Raziye Studying the effect of Bi2O3 addition before and after calcination on electrical properties of (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 piezoceramics [ Vol.13, Issue 1 - Spring Year 1398]
  • Haydari.Fatemeh Preparation and Investigation of Natural and Biocompatible Chitosan/Magnetite Nonocomposite Pproperties [ Vol.9, Issue 3 - Autumn Year 1394]
  • Heidari.Ali Optimization of Effective Parameters in the Stir Friction Extrusion Process on Porosity and Tensile Strength of SiC Ceramic Particles Reinforced AA1050 Aluminum Matrix Composite [ Vol.17, Issue 4 - Winter Year 1402]
  • Heidari.Gholamreza Electrochemical deposition of hematite and investigation of its photoelectrochemical properties for water splitting [ Vol.12, Issue 4 - Winter Year 1397]
  • hemati.mohammad hadi Analysis of the effect of molybdenum and cobalt additives on the structural and electrical properties of PZT5 piezoceramic material [ Vol.17, Issue 4 - Winter Year 1402]
  • heydari vini.mohammad The Investigation of the Corrosion Resistance of Al/Alumina Composites Fabricated Via ARB Process [ Vol.16, Issue 3 - Autumn Year 1401]
  • heydari.farhood Optimization of mechanical and dielectric properties by controlling densification and microstructure in silicon nitride ceramics prepared by hot pressing method [ Vol.17, Issue 3 - Autumn Year 1402]
  • Hoseini.Morteza Fabrication of Al2O3/SiC Nanoparticles from the Rice Hush Ash via Self-Propagation High-Temperature Synthesis and Ball Milling [ Vol.12, Issue 2 - Summer Year 1397]
  • Hosseinabadi.Navid Investigation of rheological properties and stability of aqueous suspensions containing YSZ ceramic nanoparticles [ Vol.17, Issue 2 - Summer Year 1402]
  • Hosseini moradi.seyed ali ساخت الکترودهای ابرخازنیِ نیکل منگنز اکسید (NiMnO3) نانوصفحه‌ای با استفاده از روش سنتز [ Vol.17, Issue 2 - Summer Year 1402]
  • hosseini.hadi Enhancing Electrochemical Performance of Super capacitors Electrode Using Nickel-Based Metal-Organic [ Vol.16, Issue 3 - Autumn Year 1401]
  • Hosseini.Morteza Friction Stir Welding of Ultrafine-Grained Al 1050: Investigation of Pin Geometry, Welding Atmosphere Temperature and Welding Speeds on the Mechanical Properties [ Vol.16, Issue 2 - Summer Year 1401]
  • Hosseini.Seyed Kamal Fabrication of Ni-VC Nano composite powder from oxide reactants by mechanochemical method [ Vol.12, Issue 4 - Winter Year 1397]
  • Hosseinipour.Seyed Jamal Effect of zirconium addition on microstructure and hardness of Al-6Zn-2.5Mg-1.5Cu alloy produced by mechanical alloying [ Vol.9, Issue 4 - Winter Year 1394]
  • Hosseinipour.Seyed Jamal Investigation of hydrogen desorption temperature of MgH2-10wt% (Ti, Mn, V and Fe) nanocomposite produced by mechanical alloying [ Vol.10, Issue 3 - Autumn Year 1395]
  • Hosseinzadeh.Mortza Investigation of Microstructure, Hardness and Intermetallic Compound in Friction stir Welding of AA6065 Aluminum Alloy to Copper [ Vol.12, Issue 2 - Summer Year 1397]

I

  • Imanian Ghazanlou.Siavash Nickel-cobalt matrix reinforced with silicon oxide nanoparticles nanocomposte coating prepared by direct current electrochemical deposition method [ Vol.10, Issue 2 - Summer Year 1395]
  • Irannajad.Mehdi Adsorption and Kinetics Studies of Heavy Metals Removal by MnO2 Modified Zeolite [ Vol.13, Issue 1 - Spring Year 1398]

J

  • jabbarzare.saeid Investigation of the Tempering Treatment on the Mechanical Propertiesof 13%Cr Super Martensitic Stainless Steel [ Vol.10, Issue 1 - Spring Year 1395]
  • jabbarzare.Saeid Investigation of Optimal Milling Conditions in the Production of Mg-3Zn-1Mn Nanocomposite [ Vol.16, Issue 1 - Spring Year 1401]
  • Jaberi Zamharir.Mehran Effect of nanograghite addition on the densification of ZrB2-SiC composites fabricated by spark plasma sintering [ Vol.12, Issue 4 - Winter Year 1397]
  • Jafari Farsaani.Danial Bubble absorption enhancement in water-based nanofluids using nickel oxide nanoparticles in the presence of surfactant [ Vol.17, Issue 1 - Spring Year 1402]
  • Jafari.Hasan The effect of calcium on corrosion behavior of biodegradable Mg-5Zn-1Y Alloy [ Vol.11, Issue 4 - Winter Year 1396]
  • Jafari.Hasan Effect of cooling rate on microstructure and corrosion behavior of biodegradable Mg-5Zn-1Y-0.1Ca alloy in simulated body fluid [ Vol.12, Issue 1 - Spring Year 1397]
  • jafari.majid [ Vol.7, Issue 4 - Autumn Year 1393]
  • jafari.majid [ Vol.7, Issue 4 - Autumn Year 1393]
  • jafari.majid [ Vol.6, Issue 3 - Autumn Year 1391]
  • jafari.majid [ Vol.7, Issue 2 - Summer Year 1392]
  • JAFARI.MAJID [ Vol.6, Issue 1 - Spring Year 1391]
  • JAFARI.MAJID [ Vol.5, Issue 2 - Summer Year 1390]
  • JAFARI.MAJID [ Vol.5, Issue 1 - Spring Year 1390]
  • JAFARI.MAJID [ Vol.9, Issue 1 - Spring Year 1394]
  • Jafarian.Mojtaba Study on phase, structural changes and microwave absorption of magnetic powder with BaZn0.6Zr0.3X0.3Fe10.8O19 (X=Ti,Ce,Sn) composition [ Vol.14, Issue 2 - Summer Year 1399]
  • Jafarian.Mojtaba Investigating the Effect of Al Temper type on Microstructure and Mechanical properties of Al 6061/Mg AZ31 alloys Diffusion Bonded Joint [ Vol.10, Issue 3 - Autumn Year 1395]
  • Jafarian.Mojtaba Comparative assessment the magnetic properties of barium hexaferrite doped with paramagnetic and diamagnetic cations [ Vol.11, Issue 2 - Summer Year 1396]
  • jahadi.sina Corrosion Inhibition of Polyethylene Glycol on Carbon Steel in Sulfuric Acid Solutions and its Synergism with Schiff Base [ Vol.12, Issue 2 - Summer Year 1397]
  • Jalinousi.Yasaman Preparation of zirconia Nanopowder from the product of the acid washing stage of Alkali fusion of Zircon: investigation of the parameters of the preparation stage of zirconia Nanopowder by precipitation method [ Vol.18, Issue 1 - Spring Year 1403]
  • Jamali-Sheini.Farid Investigations of ethanol, ethylene glycol and deionized water solvents effects on structural and optical properties of Ag-CuO hybrid nano-material synthesized by solvo/hydrothermal-microwave method [ Vol.12, Issue 3 - Autumn Year 1397]
  • Jannati Esfehani.Aazam In vitro investigation of the GdF3:Bi nanoparticles synthesized via hydrothermal method as the dual MRI-CT contrast agent [ Vol.17, Issue 4 - Winter Year 1402]
  • Javad Kalbasi.Roozbeh Synthesis, Identification and Application of Polyacrylamide Polystyrene/Bentonite Nanocomposite for Adsorbing of Lead and Cadmium from Contaminated Water [ Vol.13, Issue 4 - Winter Year 1398]
  • Javadpour.Sirus Low Temperature CO Sensor Based on PEDOT:PSS/Fe(II)(salen) Composite Thin Film [ Vol.12, Issue 1 - Spring Year 1397]
  • jazirehpour.mohammad Investigation of Electromagnetic Properties and Microwave Absorption of Z-Type HexFerrite with Zinc Substitution [ Vol.14, Issue 3 - Autumn Year 1399]
  • jazirehpour.mohammad Synthesis and characterization of Fe2O3/BaFe12O19 nanorods and investigation of their magnetic properties [ Vol.11, Issue 1 - Spring Year 1396]
  • Jazirehpour.Mohammad The Effect of Gd Cation Substitution on the Structural and Electromagnetic Properties of Z-Type Barium Hexaferrite [ Vol.16, Issue 3 - Autumn Year 1401]
  • Jiryaei Sharahi.Hassan Modification of Microstructure and Enhancing Mechanical Properties of as-cast AZ91 Magnesium alloy via Friction Stir Processing [ Vol.15, Issue 1 - Spring Year 1400]

K

  • kafaei.seyed amin Effect of Interlayer Type on Mechanical Properties and Microstructure of the 6061 Aluminum Alloy Joint by Friction Stir Welding [ Vol.14, Issue 4 - Winter Year 1399]
  • Kaflou.Ali Effect of Powder Morphology on Thermal properties and strentgh of High Heat Flux Porous Coatings Synthesized by Powder Metallurgy [ Vol.11, Issue 2 - Summer Year 1396]
  • Kaflou.Ali Phase transformations during high temperature brazing of dissimilar bonding of IN738 to TiAl intermetallic compound using Ni-Si-B ternary filler alloy [ Vol.15, Issue 1 - Spring Year 1400]
  • Kalaee.Mohammadreza Optimization the Mechanical Properties of PVC/n-NBR Blends Using Taguchi Experimental Design Method [ Vol.16, Issue 1 - Spring Year 1401]
  • Kalantari.Mina Effect of Hydroxyapatite Nanoparticles on Differentiotion of Mesenchymal Stem ‍Cells into Bone cells in Polycaprolacton/Keratin/Hydroxyapatite Scaffolds [ Vol.14, Issue 1 - Spring Year 1399]
  • Kalantari.Shirin Sonochemical synthesis of Eu doped ZnS-Fe3O4 nanocomposite with improved photocalalytic performance in the remediation of dye organic pollutant [ Vol.17, Issue 1 - Spring Year 1402]
  • Kamran haghighi.Hossein Adsorption and Kinetics Studies of Heavy Metals Removal by MnO2 Modified Zeolite [ Vol.13, Issue 1 - Spring Year 1398]
  • Karami Osboo.Ruhollah Preparation of Magnetic Nano Composite Modified with Orange Peel for Adsorption of Vitamin B5 from Aqueous Solution [ Vol.16, Issue 2 - Summer Year 1401]
  • karamian.ebrahim Investigation of Bioactivity Properties of Nanocomposite NHA/ Diopside Densified by Two Steps Sintered to Use in Medical Applications [ Vol.10, Issue 2 - Summer Year 1395]
  • karamian.ebrahim The Effect of Separate and Simultaneous Use of Phosphate, Silicate and Borate Binders on the Physical and Mechanical Properties of Magnesia - Carbon Monolithic Refractories [ Vol.9, Issue 4 - Winter Year 1394]
  • karamian.ebrahim The role of mechanical energy to thermal synthesis of nanostructur (crystals) Beta-tricalcium phosphate Powder (β-TCP) [ Vol.11, Issue 2 - Summer Year 1396]
  • karamian.ebrahim [ Vol.2, Issue 4 - Winter Year 1387]
  • Karbasi.Saeed On the use of Response Surface Methodology for Optimization of Scaffold Composite of the Hydroxyapatite and Diopside [ Vol.15, Issue 2 - Summer Year 1400]
  • karbassi.Mahnaz Synthesis of (CZTS) Cu2ZnSnS4 Nanoparticles by Hydrothermal Method for Solar Cell Application [ Vol.15, Issue 2 - Summer Year 1400]
  • Karimzad Ghavidel.Ayub Fabrication and Optimization of Humidity Sensor Based on Porous Nanostructure Tungsten Tri‌oxide / Silver Nanoparticles [ Vol.17, Issue 1 - Spring Year 1402]
  • Karimzadeh.F. Synthesis and characterization of (Fe,Ti)3Al-Al2O3 nanocomposite via Fe2O3 reduction by Al [ Vol.11, Issue 2 - Summer Year 1396]
  • Karimzadeh.Fathollah Study and investigation on the formation of NbAl3-based nanocomposite reinforced by Al2O3 particles: microstructural and thermal analysis investigation [ Vol.12, Issue 2 - Summer Year 1397]
  • Karkhaneh.Akbar Investigation of mechanical and biological properties of functionalized polycaprolactone and polyethylene glycol diacrylate based scaffold reinforced with hydroxyapatite [ Vol.12, Issue 3 - Autumn Year 1397]
  • Kashi saz.Amin Synthesis of self-healing composite coating due to development of corrosion-resistant of 2024 Al alloy [ Vol.17, Issue 1 - Spring Year 1402]
  • Kasiri.Masoud [ Vol.9, Issue 2 - Summer Year 1394]
  • Kasiri.Masoud [ Vol.9, Issue 2 - Summer Year 1394]
  • Kavanlouei.Majid [ Vol.9, Issue 3 - Autumn Year 1394]
  • Kazemzadeh.Asghar Fabrication of Nanofibers Core - Shell Oxide by One Step Electrospinning Method [ Vol.10, Issue 1 - Spring Year 1395]
  • Kazemzadeh.S. Mohammad Synthesis and Characterization of polyurethane/silver nanocomposite by Microwave assisted [ Vol.12, Issue 4 - Winter Year 1397]
  • kermani.fareed Evaluation the Effect of Heat Treatment on Solidification Structure Segregation and Mechanical Properties of Inconel 625 in the Additive Manufacturing Process by DLMD Method [ Vol.18, Issue 1 - Spring Year 1403]
  • Khalaj.Gholamreza Synthesis and characterization of ZrB2 nanopowder by Sol-gel method [ Vol.16, Issue 4 - Winter Year 1401]
  • Khalaj.Gholamreza Comparison of the effect of thermal cycles on phase transformation and structure in the heat-affected zone of pipeline steel welding [ Vol.17, Issue 2 - Summer Year 1402]
  • Khalaj.Gholamreza Modelling of austenite formation in weld heat affected zone of API-X65 and X70 pipeline steels [ Vol.12, Issue 3 - Autumn Year 1397]
  • Khalifeh Soltani.Seyed Sina Investigation of kinetics behavior high temperature isotherm oxidation MCrAlY coatings applied by HVOF method [ Vol.10, Issue 3 - Autumn Year 1395]
  • khalili parvar.mohammad Investigation of the welding pass numbers on structure, hardness and wear resistance of sheet welded by ESAB 85.65 [ Vol.13, Issue 1 - Spring Year 1398]
  • Khalilian.Mohsen Characterization of Thermal and Structural Properties of Poly Lactic Acid Parts Fabricated By Fused Depositing Modeling [ Vol.15, Issue 4 - Winter Year 1400]
  • Khammarnia.Somaye Synthesis and study of the highly effective catalytic activity of the Pt-LaFeO3 nanoparticles supported on polyaniline-chitosan for methanol electro-oxidation [ Vol.13, Issue 4 - Winter Year 1398]
  • Khan.AbdulKhaliq Nitrogen effect on the precipitation of secondary phases and mechanical property of the GTA welded Inconel 718 [ Vol.15, Issue 1 - Spring Year 1400]
  • khanzadeh.mohammad reza Investigation of the welding pass numbers on structure, hardness and wear resistance of sheet welded by ESAB 85.65 [ Vol.13, Issue 1 - Spring Year 1398]
  • khanzadeh.mohammad reza [ Vol.9, Issue 3 - Autumn Year 1394]
  • khanzadeh.mohammad reza Investigating the Effect of Tungsten Element on the Microstructure and Mechanical Properties of Fe-C-Ni Hard Coating [ Vol.15, Issue 2 - Summer Year 1400]
  • khanzadeh.mohammad reza Aluminum alloy (АМГ6М) joining by two processes of friction-stir and non-consumable Tungsten electrode welding and comparison of their mechanical and microstructure properties [ Vol.13, Issue 1 - Spring Year 1398]
  • khanzadeh.mohammad reza Investigation of the effect of thermal treatment after welding on the corrosion properties of the interconnecting joint wall of Cu / SS 304 sheets [ Vol.17, Issue 4 - Winter Year 1402]
  • Khatibi.Alireza The Effect of Temperature and pH on the Nano TiO2/Carbon Composite Microspheres Morphology Synthesized by Solvothermal Method [ Vol.9, Issue 4 - Winter Year 1394]
  • Kheirollahi-Hoseinabadi.Iman Investigation of the Tempering Treatment on the Mechanical Propertiesof 13%Cr Super Martensitic Stainless Steel [ Vol.10, Issue 1 - Spring Year 1395]
  • Khoda Bande Dastjerdi.Ehsan The effect of temperature of equal- chanel angular pressing process on mechanical properties and biocompatibility of titanium dental implant [ Vol.13, Issue 3 - Autumn Year 1398]
  • Khodaei.Mehdi Effect of Graphite on the Mechanical Properties and Tribological Behavior of Aluminum Matrix ‎Nanocomposite [ Vol.18, Issue 1 - Spring Year 1403]
  • khodai.mohammad Characterization of Thermal and Structural Properties of Poly Lactic Acid Parts Fabricated By Fused Depositing Modeling [ Vol.15, Issue 4 - Winter Year 1400]
  • khodai.mohammad The effect of surface roughness and the current on the strength of stud welded pin [ Vol.12, Issue 2 - Summer Year 1397]
  • khodai.mohammad [ Vol.9, Issue 3 - Autumn Year 1394]
  • khodai.mohammad Numerical simulation on melt flow in steel Continuous casting and inclusion tracing [ Vol.9, Issue 4 - Winter Year 1394]
  • khodai.mohammad The effect of temperature of equal- chanel angular pressing process on mechanical properties and biocompatibility of titanium dental implant [ Vol.13, Issue 3 - Autumn Year 1398]
  • khodai.mohammad Anisotropy of Mechanical Properties of Poly Lactic Acid Scaffolds Produced by Fused Deposition Modeling for Bone Tissue Engineering [ Vol.15, Issue 1 - Spring Year 1400]
  • Khoeini.Mahdi Synthesis and characterization of hollow mesoporous Silica nanocomposites via polystyrene template [ Vol.14, Issue 1 - Spring Year 1399]
  • Khorasani.Mohammad T. Preparation and evaluation of physical and cellular activity properties of poly (L-lactic acid)/ heparinized multiwall carbon nanotube nanocomposite films for application in nerve regeneration [ Vol.12, Issue 3 - Autumn Year 1397]
  • Khorram.Ali The effect of homogenization on the microstructure and mechanical properties of transient liquid phase bonding between Inconel 718 and Inconel 600 [ Vol.11, Issue 3 - Autumn Year 1396]
  • khorramirad.mohammad mehdi Synthesis of Lanthanum Hexaaluminate (LaMgAl11O19) Powder in order to plasma spary coating on the nickel superalloy as Thermal Barrier coating [ Vol.12, Issue 3 - Autumn Year 1397]
  • khorsand-ghayeni.mohammad Evaluation of the thermal properties of PLLA/HA and PLLA/45S5 composites for application in bioabsorbable interference screws [ Vol.11, Issue 4 - Winter Year 1396]
  • Kiani.Gholamreza Fabrication and Optimization of Humidity Sensor Based on Porous Nanostructure Tungsten Tri‌oxide / Silver Nanoparticles [ Vol.17, Issue 1 - Spring Year 1402]
  • Kiani-Rashid.Ali Reza Effects of size and type of coating of iron powders and copper additive on the properties of hollow steel spheres [ Vol.10, Issue 2 - Summer Year 1395]
  • Kokabi.Amir Hosein Evolution of the Microstructure and Mechanical Properties of Friction Stir Welded Ferrite-Martensite DP700 Dual Phase Steel [ Vol.14, Issue 4 - Winter Year 1399]
  • Kokabi.Amir Hosein Investigation of effect of tool geometry on formation of common defects, and mechanical properties of 5456 Aluminum alloy, in Friction Stir Lap Welded process [ Vol.11, Issue 1 - Spring Year 1396]
  • Kokabi.Dariush Phase transformations during high temperature brazing of dissimilar bonding of IN738 to TiAl intermetallic compound using Ni-Si-B ternary filler alloy [ Vol.15, Issue 1 - Spring Year 1400]
  • Kolivand.Niloufar Characterization, biological evaluation, and investigation of antibacterial properties of strontium-modified silicate-based bioactive glass in the presence of high amounts of magnesium [ Vol.18, Issue 2 - Summer Year 1403]
  • Kordzangeneh.Shirin Coating of Steel by Long Alkyd Resin Reinforced with SiC Nanoparticles to Improve its Corrosion Resistance [ Vol.11, Issue 2 - Summer Year 1396]
  • kouchaki foroshani.Amirhossein Optimization of mechanical and dielectric properties by controlling densification and microstructure in silicon nitride ceramics prepared by hot pressing method [ Vol.17, Issue 3 - Autumn Year 1402]
  • koupaei.narges Investigation of mechanical and biological properties of functionalized polycaprolactone and polyethylene glycol diacrylate based scaffold reinforced with hydroxyapatite [ Vol.12, Issue 3 - Autumn Year 1397]
  • Kuwaiti.محمد Investigation of the Tempering Treatment on the Mechanical Propertiesof 13%Cr Super Martensitic Stainless Steel [ Vol.10, Issue 1 - Spring Year 1395]

L

  • lari.Najme Optical behavior of multilyer-composite Silica-Titania coatings applied by sol-gel method [ Vol.9, Issue 4 - Winter Year 1394]
  • Lesani.Pooria An investigation on the behavior of manganese cobaltite spinel oxide as the SOFC interconnect coating materials [ Vol.11, Issue 4 - Winter Year 1396]
  • lexian.hossein Analysis of the effect of molybdenum and cobalt additives on the structural and electrical properties of PZT5 piezoceramic material [ Vol.17, Issue 4 - Winter Year 1402]
  • Loryaei.Ehsan Efect of temperature on microstructure and intermetallic compound formation of Diffusion Bonded Mg/Al joints [ Vol.14, Issue 1 - Spring Year 1399]
  • lotfian.Najme Investigation of adding TiO2 nanoparticles on the electrical conductivity of RGO_ZnO nanocomposite [ Vol.12, Issue 2 - Summer Year 1397]
  • lotfian.Najme The Effect of Nano MgCr2O4 Functionalized By Silanol Group to Improve Physical and Mechanical Properties of Direct Bonded Mag- Chrome Refractories [ Vol.15, Issue 4 - Winter Year 1400]

M

  • Mahbubi.Farzad Fracture toughness and plasticity evaluation of sputter deposited tantalum nitride thin film [ Vol.13, Issue 1 - Spring Year 1398]
  • Mahbubi.Farzad The effect of nanodiamond concentration on wear behavior of nickel-boron-nanodiamond composite coatings [ Vol.17, Issue 3 - Autumn Year 1402]
  • Mahbubi.Farzad Corrosion behavior of magnetron sputtered tantalum coating [ Vol.12, Issue 2 - Summer Year 1397]
  • Mahdavi.Farshid Synthesis of Zinc Ferrite Ferrofluid and Investigation of its Rheology and Magnetic Properties [ Vol.16, Issue 1 - Spring Year 1401]
  • Mahdavi.Mohammad The effect of manganese (III) acetylacetonate nano coating on the mechanism of thermal decomposition of ammonium perchlorate [ Vol.14, Issue 2 - Summer Year 1399]
  • Mahdavi.Mohammad Study of the catalytic activity of nano-coating CuC2O4 on tne thermodynamic parameters of thermal decomposition of ammonium perchlorate [ Vol.11, Issue 4 - Winter Year 1396]
  • mahdavi.rashid Influence of Cold Rolling and Annealing on Microstructure and Tensile Properties of Hastelloy X Superalloy [ Vol.11, Issue 2 - Summer Year 1396]
  • mahdavi.rashid The effect of addition of aluminum and titanium alloy Tghyyrshklgrm behavior Aynvar [ Vol.10, Issue 2 - Summer Year 1395]
  • Mahdavinia.Mahsa Fabrication and Optimization of Humidity Sensor Based on Porous Nanostructure Tungsten Tri‌oxide / Silver Nanoparticles [ Vol.17, Issue 1 - Spring Year 1402]
  • Mahmoodi.Mahboubeh Evaluation of wear properties and radiopacity of strontium oxide-coated polyether ether ketone implant for the treatment of anterior cruciate ligament rupture [ Vol.17, Issue 4 - Winter Year 1402]
  • Mahmoodi.Mahboubeh Synthesis and Characterizatin of Polyvinyl Alcohol/Aloe Vera Hydrogel Film by Solvent Casting Method for Wound Dressing Applications [ Vol.11, Issue 3 - Autumn Year 1396]
  • Mahmoodi.Mahboubeh Effect of Hydroxyapatite Nanoparticles on Differentiotion of Mesenchymal Stem ‍Cells into Bone cells in Polycaprolacton/Keratin/Hydroxyapatite Scaffolds [ Vol.14, Issue 1 - Spring Year 1399]
  • Mahmoodi.Mahboubeh Fabrication and Characterization of Chitosan/ Polycaprolactone Core-Shell Nanofiber Scaffold Containing Platelet-Rich Fibrin by Coaxial Electrospinning Method for Biomedical Applications [ Vol.15, Issue 2 - Summer Year 1400]
  • Mahmoudiniya.Mahdi Evolution of the Microstructure and Mechanical Properties of Friction Stir Welded Ferrite-Martensite DP700 Dual Phase Steel [ Vol.14, Issue 4 - Winter Year 1399]
  • Makkarian.Meisam The Effect of Silicon Carbide Ceramic Nanoparticles on the Tribological Properties of SN500HVI Paraffinic Base Oil [ Vol.16, Issue 1 - Spring Year 1401]
  • Malekpajouh.Davoud Mechanical alloying and fabrication of Zn-4Mn fragments produced by SPS method for using in short-term implants [ Vol.16, Issue 4 - Winter Year 1401]
  • Manafi.S. Investigation on performance of polyurethane by adding of Titanium dioxide Nanoparticle. [ Vol.12, Issue 4 - Winter Year 1397]
  • Manafi.S. Investigation of the Ways of Purification of Apatite Stone and Its using in the Ceramic Glazes [ Vol.10, Issue 1 - Spring Year 1395]
  • Manafi.S. Comparative assessment the magnetic properties of barium hexaferrite doped with paramagnetic and diamagnetic cations [ Vol.11, Issue 2 - Summer Year 1396]
  • Manafi.Sahebali Study on phase, structural changes and microwave absorption of magnetic powder with BaZn0.6Zr0.3X0.3Fe10.8O19 (X=Ti,Ce,Sn) composition [ Vol.14, Issue 2 - Summer Year 1399]
  • mansoobi.moein The effect of Al2O3 Nano-particles coated with manganese oxide on the microstructure and mechanical properties of low carbon steel using GMAW process [ Vol.15, Issue 1 - Spring Year 1400]
  • Mansourzadeh.Shiva Effect of Filler Metal on the Oxidation Resistance of 35Cr-45Ni Alloy Weld Metal [ Vol.17, Issue 1 - Spring Year 1402]
  • maraghe.mohamad Production of porous TiC preform by the gel casting process in order to synthesize Ti3SiC2 MAX phase via infiltration of preform [ Vol.11, Issue 3 - Autumn Year 1396]
  • Marzbanrad.J Effect of hot rolling and heat treatment on anisotropy properties of Mg alloy LZ71 [ Vol.14, Issue 1 - Spring Year 1399]
  • Masoudi.Behnam The Effect of Electrical Discharge Machining Parameters On 2024 Aluminum-Based Composite Material Using Calculation and Analysis of the Total Normalized Quality Loss and Signal-to-Noise Analysis [ Vol.11, Issue 1 - Spring Year 1396]
  • Masoudi.Behnam Investigation and Optimization of the Effect of Input Parameters on Material Removal Rate, Tool Wear Rate, and Surface Roughness in Electrical Discharge Machining of A356 Nano-Composite Reinforced By Alumina [ Vol.16, Issue 3 - Autumn Year 1401]
  • mazinani.Mohammad Investigation of solidification mechanism and microstructure of semi-solid as cast A380 part with swarf additions injected by diecast machine [ Vol.13, Issue 3 - Autumn Year 1398]
  • Mazrooei.Negin Effect of WO3 on the sintering behavior, microstructure, and dielectric loss of Ba(Co1/3Nb2/3)O3 Ceramics [ Vol.15, Issue 1 - Spring Year 1400]
  • Mehdikhani.Ali Enhancing Electrochemical Performance of Super capacitors Electrode Using Nickel-Based Metal-Organic [ Vol.16, Issue 3 - Autumn Year 1401]
  • mehdizadeh.mohsen Effect of Aging Time on Microstructure and Mechanical Properties of IN617 Superalloy at 900 °C [ Vol.16, Issue 2 - Summer Year 1401]
  • Memari.Mahmood Influence of Heat Treatment on Microstructure and Mechanical Properties of HVOF Sprayed Cr3C2-NiCr Coating [ Vol.14, Issue 4 - Winter Year 1399]
  • Meratian.A. The effect of pressure on the Mg alloy-Alumina composite properties fabricated by infiltration casting [ Vol.10, Issue 1 - Spring Year 1395]
  • Meratian.A. The effect of temperature of equal- chanel angular pressing process on mechanical properties and biocompatibility of titanium dental implant [ Vol.13, Issue 3 - Autumn Year 1398]
  • Meratian.A. Numerical simulation on melt flow in steel Continuous casting and inclusion tracing [ Vol.9, Issue 4 - Winter Year 1394]
  • Meratian.A. [ Vol.9, Issue 3 - Autumn Year 1394]
  • Milani.Mostafa Influence of the electrode distance and applied electrical potential on deposition of nano alumina in ethanol suspension [ Vol.12, Issue 1 - Spring Year 1397]
  • Mir Kazemi.Seyed Mohhammad Influence of the electrode distance and applied electrical potential on deposition of nano alumina in ethanol suspension [ Vol.12, Issue 1 - Spring Year 1397]
  • Mirdamadi.Shamsodin [ Vol.7, Issue 3 - Summer Year 1392]
  • Mirdamadi.Shamsodin Investigating the properties of porous Al/SiC nanocomposite with different creep testing methods [ Vol.11, Issue 2 - Summer Year 1396]
  • MIRHAJ.MARJAN Fabrication and evaluation of (chitosan / poly-vinyl-pyrrolidone) scaffold properties containing gum tragacanth by freeze-drying method [ Vol.14, Issue 1 - Spring Year 1399]
  • MIRHAJ.MARJAN Effect of Hydroxyapatite Nanoparticles on Differentiotion of Mesenchymal Stem ‍Cells into Bone cells in Polycaprolacton/Keratin/Hydroxyapatite Scaffolds [ Vol.14, Issue 1 - Spring Year 1399]
  • Mirhosseini.Seyyed Saber The effect of nanodiamond concentration on wear behavior of nickel-boron-nanodiamond composite coatings [ Vol.17, Issue 3 - Autumn Year 1402]
  • Mirjalili.Mohammad Fabrication and Characterization of Chitosan/ Polycaprolactone Core-Shell Nanofiber Scaffold Containing Platelet-Rich Fibrin by Coaxial Electrospinning Method for Biomedical Applications [ Vol.15, Issue 2 - Summer Year 1400]
  • Mirjani.Masoud Comparison of microstructure and high-temperature oxidation resistance of NiCrAlY coatings formed by atmospheric plasma spraying (APS) and solid shielding shrouded plasma spraying (SSPS) [ Vol.15, Issue 2 - Summer Year 1400]
  • mirjani.masud Comparison of Oxidation and Thermal Shock Properties of YSZ/Nanoal2o3 Composite Thermal Barrier Coatings Made By Plasma Spraying of Un-Pyrolyzed Precursor and Aglomerated Nanocrystalline Alumina Powder [ Vol.15, Issue 3 - Autumn Year 1400]
  • MirMohammadsadeghi.Seyed Ehsan Study of the effect of magnetic field on the surface roughness of the workpiece in electric discharge machining of Al2O3-reinforced A413 composite [ Vol.17, Issue 1 - Spring Year 1402]
  • Mirsattari.Nazam The Effect of Nano MgCr2O4 Functionalized By Silanol Group to Improve Physical and Mechanical Properties of Direct Bonded Mag- Chrome Refractories [ Vol.15, Issue 4 - Winter Year 1400]
  • Mirzaee.Majid Synthesis of Nickel-Nickel oxide foam by electrochemical method and its application in supercapacitor [ Vol.13, Issue 2 - Summer Year 1398]
  • Mirzaee.Omin The effect of temperature and time of calcination on synthesis of YAG nano-crystalline by normal co-precipitation method [ Vol.11, Issue 4 - Winter Year 1396]
  • Mirzaee.Omin Effect of activated carbon additive on microstructure and phase composition of reaction bonded boron carbide ceramic [ Vol.14, Issue 2 - Summer Year 1399]
  • mirzaei.zinat Investigation of Electromagnetic Properties and Microwave Absorption of Z-Type HexFerrite with Zinc Substitution [ Vol.14, Issue 3 - Autumn Year 1399]
  • Mirzaei.Zinat The Effect of Gd Cation Substitution on the Structural and Electromagnetic Properties of Z-Type Barium Hexaferrite [ Vol.16, Issue 3 - Autumn Year 1401]
  • Mizbani.Ahmadreza Study of the effect of magnetic field on the surface roughness of the workpiece in electric discharge machining of Al2O3-reinforced A413 composite [ Vol.17, Issue 1 - Spring Year 1402]
  • Moazami Godarzi.Mohammad Rasool Modeling of aging process for pre-rolled Ni-Span C 902 superalloy [ Vol.10, Issue 2 - Summer Year 1395]
  • mobasherpour.iman Thermal shock behavior of thermal barrier coatings YSZ, YSZ/mullite and gradient coating YSZ/mullite on nickel base superalloy prepared by plasma spray (APS) method [ Vol.17, Issue 3 - Autumn Year 1402]
  • mobasherpour.iman Improving the Biocompatibility Performance of Ti-6Al-4V Alloy with Bi Phasic Calcium Phosphate Gradient Coating By Plasma Spray Method [ Vol.15, Issue 4 - Winter Year 1400]
  • Modarres.Mehrzad Analysis of Thermo-Mechanical Behavior of Gold Nanowire by Using Molecular Dynamics Method [ Vol.13, Issue 1 - Spring Year 1398]
  • Mofid.Mohammad Ammar Efect of temperature on microstructure and intermetallic compound formation of Diffusion Bonded Mg/Al joints [ Vol.14, Issue 1 - Spring Year 1399]
  • Moghanian.Amirhossein Comparison of in vitro physico-chemical and antibacterial properties of 68S and 58S bioactive glasses synthesized by sol-gel method [ Vol.13, Issue 4 - Winter Year 1398]
  • Moghanian.Amirhossein Investigation of the Effects of HVOF Process Parameters on the Quality and Wear Properties of the Coating Tungsten Carbide on 4130 Steel [ Vol.16, Issue 2 - Summer Year 1401]
  • Moghanian.Amirhossein In vitro investigation of the GdF3:Bi nanoparticles synthesized via hydrothermal method as the dual MRI-CT contrast agent [ Vol.17, Issue 4 - Winter Year 1402]
  • Moghanian.Amirhossein Investigation of the Effect of Strontium Ion Content on Thermal, Bioactivity, Antibacterial Properties and Behavior of MC3T3-E1 Osteoblast Cells in Silicate-Based Bioactive Glass [ Vol.15, Issue 3 - Autumn Year 1400]
  • Moghanian.Amirhossein Characterization and investigation of biocompatibility of bioactive glass 60 mol%SiO2-36 mol%CaO-4 mol%P2O5-5 mol%SrO containing zinc [ Vol.18, Issue 1 - Spring Year 1403]
  • Moghanian.Amirhossein Comparative Study of the Effects of Strontium and Magnesium Ions on Physical and Chemical Properties of Calcium Phosphate-Gelatin Biomimetic Scaffolds in Bone Tissue Engineering [ Vol.16, Issue 1 - Spring Year 1401]
  • Moghanian.Amirhossein Characterization, biological evaluation, and investigation of antibacterial properties of strontium-modified silicate-based bioactive glass in the presence of high amounts of magnesium [ Vol.18, Issue 2 - Summer Year 1403]
  • moghri.Mehdi Optimization the Mechanical Properties of PVC/n-NBR Blends Using Taguchi Experimental Design Method [ Vol.16, Issue 1 - Spring Year 1401]
  • moh\mmad shiri.hamid Characterization of Electro Synthesized Perovskites Structured Ybmno3 Nanoparticles [ Vol.15, Issue 4 - Winter Year 1400]
  • Mohagheghpour.Elham Effect of substrate temperature on structural and physical properties of carbon thin films prepared by ion beam sputtering deposition method [ Vol.11, Issue 4 - Winter Year 1396]
  • Mohammadi Alasti.Behzad Measuring of temperature in steel bar using machine vision system and genetic algorithm in variable conditions [ Vol.10, Issue 2 - Summer Year 1395]
  • Mohammadi Rahvard.Masoud Enhanced thermal stability of Zr56Co28Al16 bulk metallic glass with addition of Ag and Cu elements [ Vol.13, Issue 2 - Summer Year 1398]
  • Mohammadian.Mousa Corrosion monitoring of sulfuric acid tank under anodic protection by electrochemical noise [ Vol.12, Issue 4 - Winter Year 1397]
  • Mohassel.Abbas Carbothermic reduction of nickel oxide [ Vol.13, Issue 2 - Summer Year 1398]
  • Mohassel.Abbas Effects of alumina nanoparticles, number of stirring pass and rotational speed on the mechanical behavior of friction stir welded (FSW) magnesium alloy (AM60) [ Vol.16, Issue 4 - Winter Year 1401]
  • Mojtahedzadeh Larijani.Majid Effect of substrate temperature on structural and physical properties of carbon thin films prepared by ion beam sputtering deposition method [ Vol.11, Issue 4 - Winter Year 1396]
  • Mokhtari dehkordi.Javad The effect of surface roughness and the current on the strength of stud welded pin [ Vol.12, Issue 2 - Summer Year 1397]
  • mokhtarian.ali Investigation and Optimization of the Effect of Input Parameters on Material Removal Rate, Tool Wear Rate, and Surface Roughness in Electrical Discharge Machining of A356 Nano-Composite Reinforced By Alumina [ Vol.16, Issue 3 - Autumn Year 1401]
  • mokhtarian.ali Study of the effect of magnetic field on the surface roughness of the workpiece in electric discharge machining of Al2O3-reinforced A413 composite [ Vol.17, Issue 1 - Spring Year 1402]
  • mollazadeh.sahar An investigation on the effect of fuel to oxidizer ratio on the structural properties of (Fe, Mn, Ni, Co, Cr)3O4 high entropy oxide [ Vol.18, Issue 2 - Summer Year 1403]
  • monshi.ahmad [ Vol.9, Issue 1 - Spring Year 1394]
  • monshi.ahmad [ Vol.6, Issue 3 - Autumn Year 1391]
  • monshi.ahmad [ Vol.7, Issue 4 - Autumn Year 1393]
  • monshi.ahmad [ Vol.6, Issue 2 - Summer Year 1391]
  • monshi.ahmad [ Vol.3, Issue 2 - Summer Year 1388]
  • monshi.ahmad [ Vol.7, Issue 2 - Summer Year 1392]
  • monshi.ahmad The Effect of Separate and Simultaneous Use of Phosphate, Silicate and Borate Binders on the Physical and Mechanical Properties of Magnesia - Carbon Monolithic Refractories [ Vol.9, Issue 4 - Winter Year 1394]
  • monshi.ahmad [ Vol.7, Issue 4 - Autumn Year 1393]
  • monshi.ahmad [ Vol.5, Issue 2 - Summer Year 1390]
  • monshi.ahmad [ Vol.2, Issue 1 - Spring Year 1387]
  • monshi.ahmad [ Vol.2, Issue 3 - Autumn Year 1387]
  • monshi.ahmad [ Vol.7, Issue 3 - Summer Year 1392]
  • monshi.ahmad [ Vol.6, Issue 4 - Winter Year 1391]
  • monshi.ahmad Developing in situ nano forsterite by adding micro silica and silicon and studying the role of ferrosilicon on physical and mechanical properties of magnesium forsterite carbon [ Vol.14, Issue 2 - Summer Year 1399]
  • monshi.ahmad [ Vol.2, Issue 4 - Winter Year 1387]
  • monshi.ahmad [ Vol.3, Issue 1 - Spring Year 1388]
  • monshi.ahmad [ Vol.5, Issue 4 - Winter Year 1390]
  • monshi.ahmad [ Vol.9, Issue 3 - Autumn Year 1394]
  • Montazeri.Abbas Investigating the Effect of Poly (D L-Lactic Acid) Molecular Weight on the Shape Memory Parameters: A Molecular Dynamics Study [ Vol.16, Issue 2 - Summer Year 1401]
  • Montazeri-Pour.Mehdi Synthesis and Characterization of SrFe12O19/SiO2/TiO2 Composite Powder with Core/Shell/Shell Nanostructure [ Vol.12, Issue 3 - Autumn Year 1397]
  • moradpor.ehsan Synthesis of Molybdenum disulfide solid lubricant coating on steel using Thermal-diffusion method [ Vol.11, Issue 3 - Autumn Year 1396]
  • Moradpour.Javad Functionalization and stable synthesis of PET-AuNPs nanocomposites by sonochemistry and electrochemical quantitative and qualitative studies with modified AuNPs-PET / CNT / Au electrode [ Vol.17, Issue 1 - Spring Year 1402]
  • Morakkabti.Maryam Investigation of Dynamic and Static Restoration in Hot Deformation of SP-700 Titanium Alloy [ Vol.13, Issue 2 - Summer Year 1398]
  • Morshed Behbahani.Khashayar The Investigation of Sensitization Effect on the Corrosion Behavior of SAF 2205 Duplex SS at Transpassive Region [ Vol.10, Issue 4 - Winter Year 1395]
  • Morshed Behbahani.Khashayar [ Vol.9, Issue 2 - Summer Year 1394]
  • Morshed-Behbahani.Khashayar The Influence of Sensitization Heat-treatment and Surface Finishing on the Properties of the SAF 2205 Duplex SS Passive Layer [ Vol.12, Issue 4 - Winter Year 1397]
  • Morshed-Behbahani.Khashayar Investigation of the Intergranular Corrosion Behavior of UNS S42000 Martensitic Stainless Steels Using Potentiodynamic Electrochemical Impedance Spectroscopy [ Vol.15, Issue 3 - Autumn Year 1400]
  • Mosadeghian.Adel Investigating the Effect of Tungsten Element on the Microstructure and Mechanical Properties of Fe-C-Ni Hard Coating [ Vol.15, Issue 2 - Summer Year 1400]
  • Mosalaieepor.Masoud Improvement of Load Bearing Capacity of Al-1100 Joining area by using In-situ Synthesizing of Al/Cr during FSSW [ Vol.13, Issue 4 - Winter Year 1398]
  • Mostaan.Hossein Study and investigation on the formation of NbAl3-based nanocomposite reinforced by Al2O3 particles: microstructural and thermal analysis investigation [ Vol.12, Issue 2 - Summer Year 1397]
  • Motevalizadeh Ardakani.Najmeh The effects of temperature and pH on the shape, size, and color of the synthesized nano-plate shape hematite by hydrothermal method [ Vol.16, Issue 4 - Winter Year 1401]
  • Mousavi Khoie.Seyed Mohammad Corrosion behavior of magnetron sputtered tantalum coating [ Vol.12, Issue 2 - Summer Year 1397]
  • Movahedi.Mojtaba Modification of Microstructure and Enhancing Mechanical Properties of as-cast AZ91 Magnesium alloy via Friction Stir Processing [ Vol.15, Issue 1 - Spring Year 1400]
  • Mozafari.Majid Copper manganese ferrite nanoparticles production via co precipitation method and study of its sensitivity property for ethanol detection [ Vol.11, Issue 4 - Winter Year 1396]
  • Mozafarinia.Reza Investigating optical properties, morphology and size of silver nanoparticles prepared by nanosecond Nd:YAG laser in liquid [ Vol.18, Issue 2 - Summer Year 1403]
  • Mozaffari.Naeimeh Synthesis and Characterization of SrFe12O19/SiO2/TiO2 Composite Powder with Core/Shell/Shell Nanostructure [ Vol.12, Issue 3 - Autumn Year 1397]
  • Moztarzadeh.Fathollah Comparative Study of the Effects of Strontium and Magnesium Ions on Physical and Chemical Properties of Calcium Phosphate-Gelatin Biomimetic Scaffolds in Bone Tissue Engineering [ Vol.16, Issue 1 - Spring Year 1401]

N

  • nabavi.behrooz Nitrogen effect on the precipitation of secondary phases and mechanical property of the GTA welded Inconel 718 [ Vol.15, Issue 1 - Spring Year 1400]
  • Naderi.hamed Evaluation the Effect of Heat Treatment on Solidification Structure Segregation and Mechanical Properties of Inconel 625 in the Additive Manufacturing Process by DLMD Method [ Vol.18, Issue 1 - Spring Year 1403]
  • Naderi.Malek Fracture toughness and plasticity evaluation of sputter deposited tantalum nitride thin film [ Vol.13, Issue 1 - Spring Year 1398]
  • NADERI.MOHAMMADREZA Investigation the effects of SiC reinforcement incorporation on mechanical properties of friction stir welded AZ31 magnesium alloy [ Vol.10, Issue 4 - Winter Year 1395]
  • NADERI.MOHAMMADREZA Investigation of effect of tool geometry on formation of common defects, and mechanical properties of 5456 Aluminum alloy, in Friction Stir Lap Welded process [ Vol.11, Issue 1 - Spring Year 1396]
  • Naderi-Samani.Ehsan Investigating optical properties, morphology and size of silver nanoparticles prepared by nanosecond Nd:YAG laser in liquid [ Vol.18, Issue 2 - Summer Year 1403]
  • Naderi-Samani.Hamed Investigating optical properties, morphology and size of silver nanoparticles prepared by nanosecond Nd:YAG laser in liquid [ Vol.18, Issue 2 - Summer Year 1403]
  • naeimi.farid Investigation of kinetics behavior high temperature isotherm oxidation MCrAlY coatings applied by HVOF method [ Vol.10, Issue 3 - Autumn Year 1395]
  • naeimi.farid The effect of Al2O3 Nano-particles coated with manganese oxide on the microstructure and mechanical properties of low carbon steel using GMAW process [ Vol.15, Issue 1 - Spring Year 1400]
  • Najafi.Abolhasan Synthesis and characterization of ZrB2 nanopowder by Sol-gel method [ Vol.16, Issue 4 - Winter Year 1401]
  • Najafi.Abolhasan Synthesis and characterization of hollow mesoporous Silica nanocomposites via polystyrene template [ Vol.14, Issue 1 - Spring Year 1399]
  • Najafisayar.Pooria The Investigation of Sensitization Effect on the Corrosion Behavior of SAF 2205 Duplex SS at Transpassive Region [ Vol.10, Issue 4 - Winter Year 1395]
  • Najafisayar.Pooria The Influence of Sensitization Heat-treatment and Surface Finishing on the Properties of the SAF 2205 Duplex SS Passive Layer [ Vol.12, Issue 4 - Winter Year 1397]
  • Najafisayar.Pooria Investigation of the Effect of Applied Current Density on Wetting Properties of Cerium Oxide Coating Fabricated by Electrochemical Deposition Method [ Vol.14, Issue 4 - Winter Year 1399]
  • Najafisayar.Pooria Investigation of the Intergranular Corrosion Behavior of UNS S42000 Martensitic Stainless Steels Using Potentiodynamic Electrochemical Impedance Spectroscopy [ Vol.15, Issue 3 - Autumn Year 1400]
  • Nankali.Noushin Investigation of the Effect of Strontium Ion Content on Thermal, Bioactivity, Antibacterial Properties and Behavior of MC3T3-E1 Osteoblast Cells in Silicate-Based Bioactive Glass [ Vol.15, Issue 3 - Autumn Year 1400]
  • Nankali.Noushin Characterization and investigation of biocompatibility of bioactive glass 60 mol%SiO2-36 mol%CaO-4 mol%P2O5-5 mol%SrO containing zinc [ Vol.18, Issue 1 - Spring Year 1403]
  • Narimani.Rahim Investigation of Microstructure, Hardness and Intermetallic Compound in Friction stir Welding of AA6065 Aluminum Alloy to Copper [ Vol.12, Issue 2 - Summer Year 1397]
  • Nasirzadeh.Navid Fabrication and Characterization of Chitosan/ Polycaprolactone Core-Shell Nanofiber Scaffold Containing Platelet-Rich Fibrin by Coaxial Electrospinning Method for Biomedical Applications [ Vol.15, Issue 2 - Summer Year 1400]
  • Nasre Isfahani.Mojtaba Corrosion Inhibition of Polyethylene Glycol on Carbon Steel in Sulfuric Acid Solutions and its Synergism with Schiff Base [ Vol.12, Issue 2 - Summer Year 1397]
  • Nasr-Esfahani.Mojtaba Effect of UV irradiation on bioactivity of polysiloxane-titanium dioxide-bioactive glass nanostructure hybrid coatings using sol-gel method [ Vol.9, Issue 4 - Winter Year 1394]
  • Nasr-Esfahani.Mojtaba Effect of pH on the adsorption properties of zinc oxide-cadmium oxide nanoparticles for removal of methyl blue and methyl orange [ Vol.11, Issue 1 - Spring Year 1396]
  • Nategh.Saeed Investigating the properties of porous Al/SiC nanocomposite with different creep testing methods [ Vol.11, Issue 2 - Summer Year 1396]
  • Nazemi.Hamid An Investigation of the Simultaneous Effect of Shot Peening and Baking on the Tensile Behavior of 50crv4 Alloy Steel [ Vol.15, Issue 4 - Winter Year 1400]
  • Nazemi.Hamid Investigating the Effect of Tungsten Element on the Microstructure and Mechanical Properties of Fe-C-Ni Hard Coating [ Vol.15, Issue 2 - Summer Year 1400]
  • Nazemorroaya.Ali Reza Evaluation of microstructure and mechanical properties of friction stir welding API-X56 steel [ Vol.9, Issue 4 - Winter Year 1394]
  • Nekoubin.A [ Vol.7, Issue 3 - Summer Year 1392]
  • Nekoubin.A Coating ZnO nanowires on gold interdigitated array electrodes and investigating the functioning of alcoholic nano gas sensors [ Vol.10, Issue 2 - Summer Year 1395]
  • Nemati.Afsaneh Green Synthesis of Fe3O4/SiO2/ZnMn2O4 Nanocomposite by AleoVera Extract and its Application as a Catalyst in Luminol-H2O2 Chemiluminescence [ Vol.14, Issue 3 - Autumn Year 1399]
  • nemati.ali [ Vol.8, Issue 2 - Summer Year 1393]
  • nemati.ali [ Vol.6, Issue 1 - Spring Year 1391]
  • nemati.ali [ Vol.7, Issue 3 - Summer Year 1392]
  • nemati.ali [ Vol.6, Issue 3 - Autumn Year 1391]
  • nemati.ali [ Vol.6, Issue 1 - Spring Year 1391]
  • nemati.ali [ Vol.7, Issue 3 - Summer Year 1392]
  • nemati.ali [ Vol.9, Issue 2 - Summer Year 1394]
  • nemati.ali [ Vol.5, Issue 3 - Autumn Year 1390]
  • nemati.ali [ Vol.4, Issue 2 - Summer Year 1389]
  • Nemati.Ali [ Vol.2, Issue 1 - Spring Year 1387]
  • NEMATI.ALI Effect of Nano- sized Fe2O3 on Microstructure and Hydration Resistance of MgO-CaO Refracrories [ Vol.10, Issue 2 - Summer Year 1395]
  • nikzad.leila Improving the Biocompatibility Performance of Ti-6Al-4V Alloy with Bi Phasic Calcium Phosphate Gradient Coating By Plasma Spray Method [ Vol.15, Issue 4 - Winter Year 1400]
  • Niroumand.Behzad [ Vol.1, Issue 2 - Autumn Year 1386]
  • Nokhasteh.Samira Evaluation of the thermal properties of PLLA/HA and PLLA/45S5 composites for application in bioabsorbable interference screws [ Vol.11, Issue 4 - Winter Year 1396]
  • nouranian.hossein Magnetite -silica-quantum dot carbon nano composite to use in melatonin drug delivery [ Vol.17, Issue 3 - Autumn Year 1402]
  • Nourbakhs.. Effect of Graphene Oxide Addition on the Behavior of Tribological Properties of Coatings Prepared on Magnesium Alloy AZ31 by Plasma Electrolytic Oxidation Method [ Vol.16, Issue 3 - Autumn Year 1401]
  • Nourbakhsh.Amir Abbas Investigation of adding TiO2 nanoparticles on the electrical conductivity of RGO_ZnO nanocomposite [ Vol.12, Issue 2 - Summer Year 1397]
  • Nourbakhsh.Amir Abbas Investigation of Nitride Bonding Fomation on Phase analysis, Microstructure and Mechanical Properties,of MgO-C Refractories [ Vol.11, Issue 1 - Spring Year 1396]
  • Nourbakhsh.Amir Abbas Investigation of Optimal Milling Conditions in the Production of Mg-3Zn-1Mn Nanocomposite [ Vol.16, Issue 1 - Spring Year 1401]
  • Nourbakhsh.Amir Abbas Synthesis of Nickel Ferrite / Cadmium Oxide Compound Nanoparticles by Co-precipitation Method and Investigation its Sensitivity to Formaldehyde [ Vol.14, Issue 3 - Autumn Year 1399]
  • Nourbakhsh.Amir Abbas The Effect of Nano MgCr2O4 Functionalized By Silanol Group to Improve Physical and Mechanical Properties of Direct Bonded Mag- Chrome Refractories [ Vol.15, Issue 4 - Winter Year 1400]
  • Nourbakhsh.Amir Abbas The effect of (nano, mesoporous) alumina and their composite with MWCNT additives on microstructure, physical and mechanical properties of alumina-C refractories [ Vol.17, Issue 3 - Autumn Year 1402]
  • Nourbakhsh.Amir Abbas Effect of geometry of laser surface texture and droplet volume on contact angle with Ti6Al4V substrate [ Vol.17, Issue 3 - Autumn Year 1402]
  • Nourbakhsh.Amir Abbas On the use of Response Surface Methodology for Optimization of Scaffold Composite of the Hydroxyapatite and Diopside [ Vol.15, Issue 2 - Summer Year 1400]
  • Nourivatan.Farid Synthesis and characterization of Ag and Cu nanorods and thermal conductivity investigation of nanofluids containing synthesized nanorods [ Vol.10, Issue 4 - Winter Year 1395]

O

  • Omidi.Mahdi Modeling of Cement-CNT Nanocomposites Mechanical Properties by Micromechanical Method [ Vol.10, Issue 1 - Spring Year 1395]
  • Omidvar.Hamid [ Vol.1, Issue 3 - Autumn Year 1386]
  • Omidvar.Hamid Investigation the effects of SiC reinforcement incorporation on mechanical properties of friction stir welded AZ31 magnesium alloy [ Vol.10, Issue 4 - Winter Year 1395]
  • Omidvar.Hamid Effects of alumina nanoparticles, number of stirring pass and rotational speed on the mechanical behavior of friction stir welded (FSW) magnesium alloy (AM60) [ Vol.16, Issue 4 - Winter Year 1401]
  • Ostovari Moghaddam.Ahmad Synthesis of nanostructured bornite by mechanical alloying and investigate the effect of co-doping Zn and Co on its thermoelectric properties [ Vol.13, Issue 4 - Winter Year 1398]

P

  • Pahlavani.Amir The effect of addition of aluminum and titanium alloy Tghyyrshklgrm behavior Aynvar [ Vol.10, Issue 2 - Summer Year 1395]
  • Pahlavani.Mostafa Effect of hot rolling and heat treatment on anisotropy properties of Mg alloy LZ71 [ Vol.14, Issue 1 - Spring Year 1399]
  • pahnaneh.farzad The effect of Al2O3 Nano-particles coated with manganese oxide on the microstructure and mechanical properties of low carbon steel using GMAW process [ Vol.15, Issue 1 - Spring Year 1400]
  • Pakshir.Mahmoud The Effect of ARB Process on the Corrosion Behavior of the Al-nano [ Vol.9, Issue 1 - Spring Year 1394]
  • Pakshir.Mahmoud An investigation of the effect of temperature on crystal form of the... [ Vol.9, Issue 1 - Spring Year 1394]
  • Pakshir.Mahmoud The effect of temperature and concentration of sulfuric acid on the concrete crown corrosion [ Vol.10, Issue 4 - Winter Year 1395]
  • Pakshir.Mahmoud Evaluation of the Pitting Corrosion Behavior of Al-nano Zro2 composite Produced by Accumulative Roll Bonding (ARB) Process [ Vol.10, Issue 2 - Summer Year 1395]
  • Pakshir.Mahmoud The Investigation of Sensitization Effect on the Corrosion Behavior of SAF 2205 Duplex SS at Transpassive Region [ Vol.10, Issue 4 - Winter Year 1395]
  • Pakshir.Mahmoud The Influence of Sensitization Heat-treatment and Surface Finishing on the Properties of the SAF 2205 Duplex SS Passive Layer [ Vol.12, Issue 4 - Winter Year 1397]
  • Pakshir.Mahmoud [ Vol.9, Issue 2 - Summer Year 1394]
  • Pakshir.Mahmoud Investigation of the Intergranular Corrosion Behavior of UNS S42000 Martensitic Stainless Steels Using Potentiodynamic Electrochemical Impedance Spectroscopy [ Vol.15, Issue 3 - Autumn Year 1400]
  • Panahi.Farhad Low Temperature CO Sensor Based on PEDOT:PSS/Fe(II)(salen) Composite Thin Film [ Vol.12, Issue 1 - Spring Year 1397]
  • Parvin.Nader Improvement in fracture toughness and wear resistance of plasma-sprayed chromia coating by addition of YSZ nanoparticles [ Vol.14, Issue 3 - Autumn Year 1399]
  • Parvin.Parviz Accumulative press bonding: a novel process for manufacturing Al/ZnO metal matrix nanocomposites [ Vol.9, Issue 4 - Winter Year 1394]
  • Parvizi.Soroush Effect of nanograghite addition on the densification of ZrB2-SiC composites fabricated by spark plasma sintering [ Vol.12, Issue 4 - Winter Year 1397]
  • Payrazm.Saba The effects of temperature and pH on the shape, size, and color of the synthesized nano-plate shape hematite by hydrothermal method [ Vol.16, Issue 4 - Winter Year 1401]
  • Peykari.Reza Investigation of the effect of thermal treatment after welding on the corrosion properties of the interconnecting joint wall of Cu / SS 304 sheets [ Vol.17, Issue 4 - Winter Year 1402]
  • Peyman.Hossein Functionalization and stable synthesis of PET-AuNPs nanocomposites by sonochemistry and electrochemical quantitative and qualitative studies with modified AuNPs-PET / CNT / Au electrode [ Vol.17, Issue 1 - Spring Year 1402]
  • poorbafrani.ahmad Investigation of Electromagnetic Properties and Microwave Absorption of Z-Type HexFerrite with Zinc Substitution [ Vol.14, Issue 3 - Autumn Year 1399]
  • Poorbafrani.Ahmad The Effect of Gd Cation Substitution on the Structural and Electromagnetic Properties of Z-Type Barium Hexaferrite [ Vol.16, Issue 3 - Autumn Year 1401]
  • Poorbafrani.Ahmad Fabrication and investigation of structural and electromagnetic wave absorption properties of Barium Strontium Titanate/Cobalt Zinc Ferrite composites [ Vol.11, Issue 4 - Winter Year 1396]
  • PouladZadeh.Mahdi Investigating optical properties, morphology and size of silver nanoparticles prepared by nanosecond Nd:YAG laser in liquid [ Vol.18, Issue 2 - Summer Year 1403]
  • Pouranvari.Majid Modification of Microstructure and Enhancing Mechanical Properties of as-cast AZ91 Magnesium alloy via Friction Stir Processing [ Vol.15, Issue 1 - Spring Year 1400]
  • Pouranvari.Majid Phase transformations during high temperature brazing of dissimilar bonding of IN738 to TiAl intermetallic compound using Ni-Si-B ternary filler alloy [ Vol.15, Issue 1 - Spring Year 1400]
  • Pouriamanesh.Rasoul Study the microstructure and hardness of FSW of API 70 steel at the presence of TiO2 particles [ Vol.12, Issue 3 - Autumn Year 1397]
  • Pourshahsavari.Reza Investigation of rheological properties and stability of aqueous suspensions containing YSZ ceramic nanoparticles [ Vol.17, Issue 2 - Summer Year 1402]

R

  • Rabiezadeh.Amin Similar and dissimilar 5754 and 6063 aluminum alloy joints by friction stir welding [ Vol.10, Issue 2 - Summer Year 1395]
  • Rabiezadeh.Amin Effect of Filler Metal on the Oxidation Resistance of 35Cr-45Ni Alloy Weld Metal [ Vol.17, Issue 1 - Spring Year 1402]
  • rafiee.nasrin Investigation of Bioactivity Properties of Nanocomposite NHA/ Diopside Densified by Two Steps Sintered to Use in Medical Applications [ Vol.10, Issue 2 - Summer Year 1395]
  • rafiee.nasrin On the use of Response Surface Methodology for Optimization of Scaffold Composite of the Hydroxyapatite and Diopside [ Vol.15, Issue 2 - Summer Year 1400]
  • Rafiei.Mahdi Synthesis and characterization of (Fe,Ti)3Al-Al2O3 nanocomposite via Fe2O3 reduction by Al [ Vol.11, Issue 2 - Summer Year 1396]
  • Rafiei.Mahdi Study and investigation on the formation of NbAl3-based nanocomposite reinforced by Al2O3 particles: microstructural and thermal analysis investigation [ Vol.12, Issue 2 - Summer Year 1397]
  • Rafieipour.Hojjat Fabrication of Nanofibers Core - Shell Oxide by One Step Electrospinning Method [ Vol.10, Issue 1 - Spring Year 1395]
  • Rafienia.Mohammad [ Vol.9, Issue 3 - Autumn Year 1394]
  • Rahimi.Mojtaba Investigation and Optimization of the Effect of Input Parameters on Material Removal Rate, Tool Wear Rate, and Surface Roughness in Electrical Discharge Machining of A356 Nano-Composite Reinforced By Alumina [ Vol.16, Issue 3 - Autumn Year 1401]
  • Rahimipour.mohammad Reza Synthesis of Lanthanum Hexaaluminate (LaMgAl11O19) Powder in order to plasma spary coating on the nickel superalloy as Thermal Barrier coating [ Vol.12, Issue 3 - Autumn Year 1397]
  • Rahimzadeh Lotfabad.Faraz Investigation of the Size Effect in Compression Test by Combined Hill-Taylor Theory [ Vol.15, Issue 2 - Summer Year 1400]
  • Rahmani.Khosrow Investigating X-ray diffraction and microstructure analysis of new high entropy alloys TiZrNbXX made by powder metallurgy method [ Vol.18, Issue 2 - Summer Year 1403]
  • rahmani.mahsa The effect of temperature and time of calcination on synthesis of YAG nano-crystalline by normal co-precipitation method [ Vol.11, Issue 4 - Winter Year 1396]
  • Rahmani-Azad.Milad Synthesis and characterization of ZrB2 nanopowder by Sol-gel method [ Vol.16, Issue 4 - Winter Year 1401]
  • Rahmanifard.Roohollah A Study on Effect of Processing Parameters on Electrical Conduction and Micro-hardness of Nano-crystalline Cu-5%at Ta Alloy. [ Vol.11, Issue 3 - Autumn Year 1396]
  • Rahmati.Sadegh Experimental Study an improvement of Parameters Affecting Resistance Spot Welding Strength in Halogen lamps by Taguchi Statistical Method [ Vol.13, Issue 1 - Spring Year 1398]
  • Rajabi.Marjan Effect of substrate temperature on structural and physical properties of carbon thin films prepared by ion beam sputtering deposition method [ Vol.11, Issue 4 - Winter Year 1396]
  • Rajabi.Masoud Investigating X-ray diffraction and microstructure analysis of new high entropy alloys TiZrNbXX made by powder metallurgy method [ Vol.18, Issue 2 - Summer Year 1403]
  • Rajabi.Masoud Synthesis and Characterization of SrFe12O19/SiO2/TiO2 Composite Powder with Core/Shell/Shell Nanostructure [ Vol.12, Issue 3 - Autumn Year 1397]
  • rajabi.mohammad Effect of zirconium addition on microstructure and hardness of Al-6Zn-2.5Mg-1.5Cu alloy produced by mechanical alloying [ Vol.9, Issue 4 - Winter Year 1394]
  • rajabi.mohammad Investigation of hydrogen desorption temperature of MgH2-10wt% (Ti, Mn, V and Fe) nanocomposite produced by mechanical alloying [ Vol.10, Issue 3 - Autumn Year 1395]
  • Rajabi.Mohammad Fabrication and characterization of ribbon and powder of amorphous alloy MBF-100 used in super alloy FSX- 414 TLP bonding [ Vol.12, Issue 1 - Spring Year 1397]
  • ranjbar.khalil The effect of niobium oxide (Nb2O5 ) on the sintering behavior of composite Al2O3-ZrO2 [ Vol.12, Issue 1 - Spring Year 1397]
  • Ranjbar.Khalil Correlation of Microstructure with Mechanical Behavior of HSLA-100 Weld Metal Produced By GTAW Method [ Vol.15, Issue 3 - Autumn Year 1400]
  • Rastegar.AmirAbbas Fabrication and Characterization of Chitosan/ Polycaprolactone Core-Shell Nanofiber Scaffold Containing Platelet-Rich Fibrin by Coaxial Electrospinning Method for Biomedical Applications [ Vol.15, Issue 2 - Summer Year 1400]
  • Raz.Majid Comparative Study of the Effects of Strontium and Magnesium Ions on Physical and Chemical Properties of Calcium Phosphate-Gelatin Biomimetic Scaffolds in Bone Tissue Engineering [ Vol.16, Issue 1 - Spring Year 1401]
  • razazi boroujeni.mohammad Production and characterization of WC-10Co-4Cr-xGr composite coating produced by thermal spraying method [ Vol.18, Issue 1 - Spring Year 1403]
  • Reyhani.Ali Investigating X-ray diffraction and microstructure analysis of new high entropy alloys TiZrNbXX made by powder metallurgy method [ Vol.18, Issue 2 - Summer Year 1403]
  • Rezaei.Mohammad Reza Modelling and prediction of the yield strength of 6061 aluminum alloy processed by accumulative roll bonding (ARB) [ Vol.12, Issue 3 - Autumn Year 1397]
  • Rezvani.Mohammad [ Vol.6, Issue 2 - Summer Year 1391]
  • Rezvani.Mohammad [ Vol.7, Issue 3 - Summer Year 1392]
  • Rezvani.Mohammad [ Vol.7, Issue 4 - Autumn Year 1393]
  • Rezvani.Mohammad [ Vol.6, Issue 1 - Spring Year 1391]
  • Rezvani.Mohammad [ Vol.7, Issue 1 - Spring Year 1392]
  • Rezvani.Mohammad [ Vol.7, Issue 2 - Summer Year 1392]
  • Rezvani.Mohammad Investigation of transparent LAS glass-ceramics in presence of Nd2O3 dopant [ Vol.9, Issue 4 - Winter Year 1394]
  • Rezvani.Mohammad [ Vol.6, Issue 4 - Winter Year 1391]
  • Rezvani.Mohammad [ Vol.6, Issue 2 - Summer Year 1391]
  • Roshanfekr.Hamideh Functionalization and stable synthesis of PET-AuNPs nanocomposites by sonochemistry and electrochemical quantitative and qualitative studies with modified AuNPs-PET / CNT / Au electrode [ Vol.17, Issue 1 - Spring Year 1402]

S

  • S. Bakhshandeha.Sahar Carbothermic reduction of nickel oxide [ Vol.13, Issue 2 - Summer Year 1398]
  • Saadat.Abbas Investigation of the welding pass numbers on structure, hardness and wear resistance of sheet welded by ESAB 85.65 [ Vol.13, Issue 1 - Spring Year 1398]
  • Saadat.Abbas Investigation of microstructure and mechanical properties of AISI304L Stainless Steel to ASTMA514 Steel joint by Gas Tungsten Arc Welding [ Vol.11, Issue 1 - Spring Year 1396]
  • Saatchi.A. Effect of Heat Treatment and B4C Carbide Distribution on Corrosion and Wear Resistance of Ni-P/Ni-B-B4C Double Layer Coating [ Vol.9, Issue 3 - Autumn Year 1394]
  • Saberian.kamal Evaluating the Effective Parameters in the Zircon Alkali Decomposition Process and Determining the Optimal Operating Conditions for Zirconium Extraction [ Vol.15, Issue 3 - Autumn Year 1400]
  • Saberian.kamal Preparation of zirconia Nanopowder from the product of the acid washing stage of Alkali fusion of Zircon: investigation of the parameters of the preparation stage of zirconia Nanopowder by precipitation method [ Vol.18, Issue 1 - Spring Year 1403]
  • sabet.hamed [ Vol.6, Issue 1 - Spring Year 1391]
  • sabet.hamed [ Vol.4, Issue 1 - Spring Year 1389]
  • sabet.hamed [ Vol.3, Issue 3 - Autumn Year 1388]
  • sabet.hamed [ Vol.9, Issue 3 - Autumn Year 1394]
  • sabet.hamed [ Vol.4, Issue 3 - Autumn Year 1389]
  • sabet.hamed [ Vol.5, Issue 1 - Spring Year 1390]
  • sabet.hamed [ Vol.7, Issue 2 - Summer Year 1392]
  • sabet.hamed [ Vol.3, Issue 4 - Winter Year 1388]
  • Sabet.Hamed Effect of Interlayer Type on Mechanical Properties and Microstructure of the 6061 Aluminum Alloy Joint by Friction Stir Welding [ Vol.14, Issue 4 - Winter Year 1399]
  • Sabet.Hamed Effect of Cr/C ratio on Microstructure and Thermal Fatigue life of the Fe-Cr-C Hardfacing alloy [ Vol.10, Issue 2 - Summer Year 1395]
  • Sadatbidgoli.Sakinesadat Studying the effects of Sodium tripoly phosphates, Sodium hexameta phosphates, Boric acid and Borax on physical properties and low tempreture strenth by product magnesite composition [ Vol.10, Issue 1 - Spring Year 1395]
  • Sadeghi.Saab Characterization of Electro Synthesized Perovskites Structured Ybmno3 Nanoparticles [ Vol.15, Issue 4 - Winter Year 1400]
  • sadeghinasab.mansoor Investigating the Effect of Tungsten Element on the Microstructure and Mechanical Properties of Fe-C-Ni Hard Coating [ Vol.15, Issue 2 - Summer Year 1400]
  • sadeghiyan.zahra Investigation of Electrochemical and Mechanical Properties of Solid Oxide Fuel Cell Fabrication by 3d Printer [ Vol.16, Issue 2 - Summer Year 1401]
  • Sadrnezhaad.Sayed Khatiboleslam Effect of geometry of laser surface texture and droplet volume on contact angle with Ti6Al4V substrate [ Vol.17, Issue 3 - Autumn Year 1402]
  • Saebnoori.Ehsan Corrosion monitoring of sulfuric acid tank under anodic protection by electrochemical noise [ Vol.12, Issue 4 - Winter Year 1397]
  • Saebnoori.Ehsan Determination of optimum production condition and characterization of Potassium Ferrate particles synthesized by electrochemical method [ Vol.12, Issue 1 - Spring Year 1397]
  • saeedi.Behnaz Influence of Heat Treatment on Microstructure and Mechanical Properties of HVOF Sprayed Cr3C2-NiCr Coating [ Vol.14, Issue 4 - Winter Year 1399]
  • Saeedi.Mina Reviewing the effect of oxidizing sintering aids on sinterability behavior of boron carbide composites (B4C) [ Vol.10, Issue 1 - Spring Year 1395]
  • Saeedi.Mina Comparison the effect of sintering temperature on the synthesis and properties of B4C-TiB2 nanocomposites by sol gel and insitu methods [ Vol.13, Issue 4 - Winter Year 1398]
  • Saeedi.Mina [ Vol.9, Issue 1 - Spring Year 1394]
  • Safari.Hossein Investigation on corrosion and tribological behaviour of plasma electrolytic oxidation coating formed on aluminium hydraulic tappet [ Vol.18, Issue 2 - Summer Year 1403]
  • Safari.Reza Theoretical and experimental study of Imidazolium Ionic Liquid Effect on the Corrosion Inhibition of 316-Stainless Steel, Using Electrochemical Test Methods and Quantum Mechanics Theories [ Vol.12, Issue 1 - Spring Year 1397]
  • Safari.Reza Characterization of Electro Synthesized Perovskites Structured Ybmno3 Nanoparticles [ Vol.15, Issue 4 - Winter Year 1400]
  • Safari.Saeed Investigation on corrosion and tribological behaviour of plasma electrolytic oxidation coating formed on aluminium hydraulic tappet [ Vol.18, Issue 2 - Summer Year 1403]
  • safarkhanian.mohamad ali Investigation the effects of SiC reinforcement incorporation on mechanical properties of friction stir welded AZ31 magnesium alloy [ Vol.10, Issue 4 - Winter Year 1395]
  • safarkhanian.mohamad ali Effect of Rotational Speed on Microstructure and Mechanical Properties of AA5456 Alloy Welded by FSW-Lap Joint [ Vol.14, Issue 4 - Winter Year 1399]
  • safarkhanian.mohamad ali Investigation of effect of tool geometry on formation of common defects, and mechanical properties of 5456 Aluminum alloy, in Friction Stir Lap Welded process [ Vol.11, Issue 1 - Spring Year 1396]
  • Saffar.Ali Precipitation synthesis and luminescence properties of MgAl2O4 nanoparticles doped with samarium [ Vol.12, Issue 2 - Summer Year 1397]
  • Saffari.Jilla Synthesis and study of the highly effective catalytic activity of the Pt-LaFeO3 nanoparticles supported on polyaniline-chitosan for methanol electro-oxidation [ Vol.13, Issue 4 - Winter Year 1398]
  • Saghafi Yazdi,.Morteza Characterization and investigation of biocompatibility of bioactive glass 60 mol%SiO2-36 mol%CaO-4 mol%P2O5-5 mol%SrO containing zinc [ Vol.18, Issue 1 - Spring Year 1403]
  • Saghafi Yazdi.Morteza Investigation of the Effects of HVOF Process Parameters on the Quality and Wear Properties of the Coating Tungsten Carbide on 4130 Steel [ Vol.16, Issue 2 - Summer Year 1401]
  • Saghafi.Morteza Investigation of the Effect of Strontium Ion Content on Thermal, Bioactivity, Antibacterial Properties and Behavior of MC3T3-E1 Osteoblast Cells in Silicate-Based Bioactive Glass [ Vol.15, Issue 3 - Autumn Year 1400]
  • Saghafiyazdi.Morteza Characterization, biological evaluation, and investigation of antibacterial properties of strontium-modified silicate-based bioactive glass in the presence of high amounts of magnesium [ Vol.18, Issue 2 - Summer Year 1403]
  • Saharkhiz.Reza Comparison of microstructure and high-temperature oxidation resistance of NiCrAlY coatings formed by atmospheric plasma spraying (APS) and solid shielding shrouded plasma spraying (SSPS) [ Vol.15, Issue 2 - Summer Year 1400]
  • Saidi.Ali [ Vol.7, Issue 1 - Spring Year 1392]
  • Saidi.Ali [ Vol.5, Issue 1 - Spring Year 1390]
  • Saidi.Ali [ Vol.2, Issue 2 - Summer Year 1387]
  • Saidi.Ali Co-effect of carbon and zinc on the mechanochemical reduction of copper oxide [ Vol.9, Issue 4 - Winter Year 1394]
  • Saidi.Ali [ Vol.2, Issue 3 - Autumn Year 1387]
  • Saidi.Ali The effects of deposition variable on the pulse electrodeposition FeNi-WC nanostructure composite [ Vol.10, Issue 3 - Autumn Year 1395]
  • Saidi.Ali Kinetics of Carbothermic Reduction of Molybdenite in the Presence of Magnesium Oxide [ Vol.14, Issue 2 - Summer Year 1399]
  • Saidi.Ali The Effects of Current Density and pH on the Electrode position of Fe-Ni Alloy and Efficiency Parameters [ Vol.9, Issue 4 - Winter Year 1394]
  • Saidi.Ali [ Vol.3, Issue 1 - Spring Year 1388]
  • Saidi.Ali [ Vol.5, Issue 1 - Spring Year 1390]
  • Saidi.Ali [ Vol.6, Issue 4 - Winter Year 1391]
  • Saidi.Ali [ Vol.4, Issue 1 - Spring Year 1389]
  • Saidi.Ali [ Vol.4, Issue 3 - Autumn Year 1389]
  • Saidi.Ali [ Vol.6, Issue 1 - Spring Year 1391]
  • Saidi.Ali [ Vol.8, Issue 2 - Summer Year 1393]
  • Saidi.Ali [ Vol.4, Issue 1 - Spring Year 1389]
  • Saidi.Ali [ Vol.6, Issue 3 - Autumn Year 1391]
  • saji.fahimeh Improving the Biocompatibility Performance of Ti-6Al-4V Alloy with Bi Phasic Calcium Phosphate Gradient Coating By Plasma Spray Method [ Vol.15, Issue 4 - Winter Year 1400]
  • Sajjadi.Seyed Abdolkarim [ Vol.3, Issue 2 - Summer Year 1388]
  • Sajjadi.Seyed Abdolkarim An investigation on the effect of fuel to oxidizer ratio on the structural properties of (Fe, Mn, Ni, Co, Cr)3O4 high entropy oxide [ Vol.18, Issue 2 - Summer Year 1403]
  • Sajjadi.Seyed Abdolkarim [ Vol.3, Issue 2 - Summer Year 1388]
  • salahi.e Magnetite -silica-quantum dot carbon nano composite to use in melatonin drug delivery [ Vol.17, Issue 3 - Autumn Year 1402]
  • salahi.esmail Thermal shock behavior of thermal barrier coatings YSZ, YSZ/mullite and gradient coating YSZ/mullite on nickel base superalloy prepared by plasma spray (APS) method [ Vol.17, Issue 3 - Autumn Year 1402]
  • Salahi.Esmail Spark Plasma Sintering of ZrB2–SiC–ZrC Nanocomposit Synthesized by MASPS [ Vol.14, Issue 2 - Summer Year 1399]
  • salehi vaziri.hossein Investigation of Microstructural and Mechanical Properties of Tungsten Disulfide (WS2) /Aluminum Matrix Nanocmposite [ Vol.14, Issue 1 - Spring Year 1399]
  • Salehi.Mahdi [ Vol.1, Issue 2 - Autumn Year 1386]
  • salehi.mehdi Evaluation of the photocatalytic activity of ZnFe2O4-TiO2 composite coating elaborated by flame spraying process [ Vol.12, Issue 4 - Winter Year 1397]
  • Salehi.Mohsen Study on phase, structural changes and microwave absorption of magnetic powder with BaZn0.6Zr0.3X0.3Fe10.8O19 (X=Ti,Ce,Sn) composition [ Vol.14, Issue 2 - Summer Year 1399]
  • Salehi.Mohsen Comparative assessment the magnetic properties of barium hexaferrite doped with paramagnetic and diamagnetic cations [ Vol.11, Issue 2 - Summer Year 1396]
  • salimi jazi.hamid reza Effect of Reinforcer Percentage and Its Distribution on Mechanical Behavior of Alumina Reinforced Epoxy Composite [ Vol.10, Issue 4 - Winter Year 1395]
  • salimi jazi.hamid reza Evaluation of the photocatalytic activity of ZnFe2O4-TiO2 composite coating elaborated by flame spraying process [ Vol.12, Issue 4 - Winter Year 1397]
  • Samimi-sedeh.Sina Determination of optimum production condition and characterization of Potassium Ferrate particles synthesized by electrochemical method [ Vol.12, Issue 1 - Spring Year 1397]
  • Sayyadi-Shahraki.Ahmad Effect of WO3 on the sintering behavior, microstructure, and dielectric loss of Ba(Co1/3Nb2/3)O3 Ceramics [ Vol.15, Issue 1 - Spring Year 1400]
  • sazegaran.hamid Effects of size and type of coating of iron powders and copper additive on the properties of hollow steel spheres [ Vol.10, Issue 2 - Summer Year 1395]
  • Sedaghat.Ali Thermal shock behavior of thermal barrier coatings YSZ, YSZ/mullite and gradient coating YSZ/mullite on nickel base superalloy prepared by plasma spray (APS) method [ Vol.17, Issue 3 - Autumn Year 1402]
  • Sehri.S. M Investigation of the Tempering Treatment on the Mechanical Propertiesof 13%Cr Super Martensitic Stainless Steel [ Vol.10, Issue 1 - Spring Year 1395]
  • Sepyani.Azadeh Fabrication and evaluation of (chitosan / poly-vinyl-pyrrolidone) scaffold properties containing gum tragacanth by freeze-drying method [ Vol.14, Issue 1 - Spring Year 1399]
  • SETOUDEH.Nader Carbothermic reduction of nickel oxide [ Vol.13, Issue 2 - Summer Year 1398]
  • SETOUDEH.Nader Effects of alumina nanoparticles, number of stirring pass and rotational speed on the mechanical behavior of friction stir welded (FSW) magnesium alloy (AM60) [ Vol.16, Issue 4 - Winter Year 1401]
  • Shabani.Masoud Effect of Tool Rotation Speed on the Mechanical Properties and Corrosion Behavior of Dissimilar Friction Stir Welded of 5083 Aluminium Alloy and Commercially Pure Titanium [ Vol.11, Issue 4 - Winter Year 1396]
  • shafei.alireza The presence effect of H2O, benzyl alcohol and CNT percent on the properties of TiO2-CNT nanocomposite synthesized by in-situ sol-gel method [ Vol.12, Issue 3 - Autumn Year 1397]
  • Shafiee.Mahdi Effects of Heat Treatment on the Microstructure, Mechanical Properties and Corrosion Behavior of 2209 Duplex Stainless Steel Parts Manufactured By Wire Arc Additive Manufacturing Process [ Vol.16, Issue 1 - Spring Year 1401]
  • Shahedi Asl.Mehdi Effect of nanograghite addition on the densification of ZrB2-SiC composites fabricated by spark plasma sintering [ Vol.12, Issue 4 - Winter Year 1397]
  • Shahrabi Farahani.Taghi Application of Myrtus Extracts as a Suitable Green Inhibitor for Corrosion of Steel in HCl Solution [ Vol.11, Issue 4 - Winter Year 1396]
  • Shahriari.Farhad Influence of Heat Treatment on Microstructure and Mechanical Properties of HVOF Sprayed Cr3C2-NiCr Coating [ Vol.14, Issue 4 - Winter Year 1399]
  • Shakeri.Hatef Efect of temperature on microstructure and intermetallic compound formation of Diffusion Bonded Mg/Al joints [ Vol.14, Issue 1 - Spring Year 1399]
  • Shamanian.Morteza Dissimilar welding of Incoloy 825 to AISI 316L austenitic stainless steel and evaluation of Microstructure and Mechanical properties [ Vol.11, Issue 3 - Autumn Year 1396]
  • Shamanian.Morteza [ Vol.9, Issue 1 - Spring Year 1394]
  • Shamanian.Morteza [ Vol.8, Issue 1 - Spring Year 1393]
  • Shamanian.Morteza [ Vol.8, Issue 3 - Autumn Year 1393]
  • Shamanian.Morteza [ Vol.3, Issue 1 - Spring Year 1388]
  • Shamanian.Morteza Effect of aging heat treatment on the microstructure, mechanical properties and corrosion resistance of Inconel 718 nickel based superalloy [ Vol.9, Issue 4 - Winter Year 1394]
  • Shamanian.Morteza [ Vol.7, Issue 1 - Spring Year 1392]
  • Shamanian.Morteza [ Vol.7, Issue 3 - Summer Year 1392]
  • Shamanian.Morteza Dissimilar welding of UNS 2205 duplex stainless steel/AISI 316L austenitic stainless steel by pulsed current GTAW and joint properties evaluation [ Vol.9, Issue 4 - Winter Year 1394]
  • Sharifi Darabad.Hadi An investigation on the production of activated carbon from olive stone [ Vol.12, Issue 3 - Autumn Year 1397]
  • Sharifi.Hasan [ Vol.9, Issue 1 - Spring Year 1394]
  • Sharifi.Hasan [ Vol.1, Issue 3 - Autumn Year 1386]
  • Shayegh.Behrooz Effect of Tool Rotation Speed on the Mechanical Properties and Corrosion Behavior of Dissimilar Friction Stir Welded of 5083 Aluminium Alloy and Commercially Pure Titanium [ Vol.11, Issue 4 - Winter Year 1396]
  • Shayegh.Behrooz The effect of surface mechanical attrition treatment time on corrosion behavior of pure Copper [ Vol.9, Issue 4 - Winter Year 1394]
  • Sheibani.shahab Effect of substrate temperature on structural and physical properties of carbon thin films prepared by ion beam sputtering deposition method [ Vol.11, Issue 4 - Winter Year 1396]
  • sheibany.saeed The presence effect of H2O, benzyl alcohol and CNT percent on the properties of TiO2-CNT nanocomposite synthesized by in-situ sol-gel method [ Vol.12, Issue 3 - Autumn Year 1397]
  • Sheikh Karami.Amirreza Continuous electrowinning of nickel from dilute sulfate solutions [ Vol.13, Issue 1 - Spring Year 1398]
  • Sheikhali.Amir Hosein Investigation of Dynamic and Static Restoration in Hot Deformation of SP-700 Titanium Alloy [ Vol.13, Issue 2 - Summer Year 1398]
  • Sheikhali.Amir Hosein Synthesis of self-healing composite coating due to development of corrosion-resistant of 2024 Al alloy [ Vol.17, Issue 1 - Spring Year 1402]
  • Shirali.Afshin Aluminum alloy (АМГ6М) joining by two processes of friction-stir and non-consumable Tungsten electrode welding and comparison of their mechanical and microstructure properties [ Vol.13, Issue 1 - Spring Year 1398]
  • Shirvani.kourosh The effect of Pt on type II hot corrosion behavior of Si-aluminide coatings with lower silicon than the critical amount [ Vol.13, Issue 3 - Autumn Year 1398]
  • Shirvani.kourosh Effect of Reinforcer Percentage and Its Distribution on Mechanical Behavior of Alumina Reinforced Epoxy Composite [ Vol.10, Issue 4 - Winter Year 1395]
  • Shirvani.Kourosh Investigation on effect of Hafnium addition on electrical and isothermal oxidation resistance of Ni-super alloy using for metallic interconnect of SOFC [ Vol.12, Issue 3 - Autumn Year 1397]
  • Shokraneh.ابراهیم Investigation of the Tempering Treatment on the Mechanical Propertiesof 13%Cr Super Martensitic Stainless Steel [ Vol.10, Issue 1 - Spring Year 1395]
  • Shokuhfar.Ali [ Vol.2, Issue 2 - Summer Year 1387]
  • Shokuhfar.Ali Effect of Graphite on the Mechanical Properties and Tribological Behavior of Aluminum Matrix ‎Nanocomposite [ Vol.18, Issue 1 - Spring Year 1403]
  • Shokuhfar.Ali [ Vol.4, Issue 1 - Spring Year 1389]
  • Shokuhfar.Ali [ Vol.2, Issue 2 - Summer Year 1387]
  • Shokuhfar.Ali [ Vol.6, Issue 3 - Autumn Year 1391]
  • Shokuhfar.Ali Investigating the sensing properties of SnO2-PdPt nanohybrid toward methane gas and effect of adding reduced graphene oxide on improving its sensing performance [ Vol.13, Issue 2 - Summer Year 1398]
  • Shokuhfar.Ali Synthesis of nanostructured bornite by mechanical alloying and investigate the effect of co-doping Zn and Co on its thermoelectric properties [ Vol.13, Issue 4 - Winter Year 1398]
  • Shokuhfar.Ali Investigation of Microstructural and Mechanical Properties of Tungsten Disulfide (WS2) /Aluminum Matrix Nanocmposite [ Vol.14, Issue 1 - Spring Year 1399]
  • Shokuhfar.Ali Sonochemical synthesis of Eu doped ZnS-Fe3O4 nanocomposite with improved photocalalytic performance in the remediation of dye organic pollutant [ Vol.17, Issue 1 - Spring Year 1402]
  • Siavash Moakhar.Roozbeh Synthesis of (CZTS) Cu2ZnSnS4 Nanoparticles by Hydrothermal Method for Solar Cell Application [ Vol.15, Issue 2 - Summer Year 1400]
  • Soleimanipour.Mojtaba Optimization of Effective Parameters in the Stir Friction Extrusion Process on Porosity and Tensile Strength of SiC Ceramic Particles Reinforced AA1050 Aluminum Matrix Composite [ Vol.17, Issue 4 - Winter Year 1402]
  • Soleimanpour.Mehrdad Adsorption and Kinetics Studies of Heavy Metals Removal by MnO2 Modified Zeolite [ Vol.13, Issue 1 - Spring Year 1398]
  • soltani.masoud Effect of Temperature, Voltage, Time of Anodizing and Applying Nickel-Phosphor Electro less Coating on Hardness and Corrosion Behavior of 2024 Aluminum Alloy [ Vol.14, Issue 3 - Autumn Year 1399]
  • Soltani.Mehrdad Investigations of ethanol, ethylene glycol and deionized water solvents effects on structural and optical properties of Ag-CuO hybrid nano-material synthesized by solvo/hydrothermal-microwave method [ Vol.12, Issue 3 - Autumn Year 1397]
  • soltani.nader Thermal shock behavior of thermal barrier coatings YSZ, YSZ/mullite and gradient coating YSZ/mullite on nickel base superalloy prepared by plasma spray (APS) method [ Vol.17, Issue 3 - Autumn Year 1402]
  • Soltanieh.Mansour Investigation of the effect of substrate on formation of chromium- and vanadium carbide coatings by thermal reactive diffusion [ Vol.12, Issue 2 - Summer Year 1397]
  • Soltanieh.Mansour Investigating the effect of nickel particle size and green density on the properties of NiAl-TiB2-TiC composite produced by combustion synthesis [ Vol.13, Issue 3 - Autumn Year 1398]

T

  • Tabatabaei, Mahdi.Mahdi Evaluation of anti-corrosion performance of epoxy ester coating in the presence of a new generation of hybrid pigments based on Echium amoenum extract and zinc acetate [ Vol.16, Issue 4 - Winter Year 1401]
  • Tadayon.Fariba Preparation of Magnetic Nano Composite Modified with Orange Peel for Adsorption of Vitamin B5 from Aqueous Solution [ Vol.16, Issue 2 - Summer Year 1401]
  • Taghian.Majid Aluminum alloy (АМГ6М) joining by two processes of friction-stir and non-consumable Tungsten electrode welding and comparison of their mechanical and microstructure properties [ Vol.13, Issue 1 - Spring Year 1398]
  • Taghi-ramezani.Saeid Comparison of microstructure and high-temperature oxidation resistance of NiCrAlY coatings formed by atmospheric plasma spraying (APS) and solid shielding shrouded plasma spraying (SSPS) [ Vol.15, Issue 2 - Summer Year 1400]
  • Taghi-ramezani.Saeid Investigating of High Temperature Oxidation and Thermal Shock Properties of YSZ/Al2O3 Composite Thermal Barrier Coatings with Alumina Made by Solution Precursor Thermal Spray [ Vol.14, Issue 4 - Winter Year 1399]
  • Taghi-ramezani.Saeid Comparison of Isothermal Oxidation and Thermal Shock Properties of CoNiCrAlY Coating Sprayed by Atmospheric Plasma Spray and Nitrogen Gas Shrouded Plasma Spray Methods [ Vol.16, Issue 1 - Spring Year 1401]
  • Taghi-ramezani.Saeid Investigating the performance of vertical crack formation in oxidation and thermal shock test of nano YSZ-40%wtAl2O3 coating applied on YSZ by atmospheric plasma spraying process [ Vol.18, Issue 2 - Summer Year 1403]
  • Taghi-ramezani.Saeid Comparison of Oxidation and Thermal Shock Properties of YSZ/Nanoal2o3 Composite Thermal Barrier Coatings Made By Plasma Spraying of Un-Pyrolyzed Precursor and Aglomerated Nanocrystalline Alumina Powder [ Vol.15, Issue 3 - Autumn Year 1400]
  • Taghi-ramezani.Saeid Investigation of Microstructure of Alumina Single-Splate Made By Solution Precursor High-Velocity Flame Spraying [ Vol.16, Issue 3 - Autumn Year 1401]
  • Taghizadeh Tabrizi.Arvin Studying the Wear Behavior of applied coats on Titanium by Chromium Electroplating and Plasma Nitriding Processes [ Vol.15, Issue 1 - Spring Year 1400]
  • tahari.mostafa Investigation of adding Cr2O3 on mechanical properties and high temperature oxidation behavior of Stellit6 coating prepared by plasma spraying on IN-738 [ Vol.11, Issue 1 - Spring Year 1396]
  • tahari.mostafa Optimization of HVOF thermal spraying parameters to improve the oxidation resistance of MCrAlY coating using Response [ Vol.11, Issue 3 - Autumn Year 1396]
  • Tahari.Mostafa Investigation of high temperature wear properties of NiCrBSi and satellite coatings deposited on hot work tool steel DIN-1.2344 [ Vol.10, Issue 4 - Winter Year 1395]
  • taheri.amirhossein Effect of Friction Stir Welding (FSW) on Corrosion Behavior of Pure Copper in 3.5 % wt NaCl Solution [ Vol.10, Issue 4 - Winter Year 1395]
  • Taheri.Esmaeil Electrochemical study on hot corrosion behavior of aluminide diffusion coating deposited on inconel 713C superalloy [ Vol.13, Issue 1 - Spring Year 1398]
  • Taherkhani.Kiyanoush Investigation nitride coating surface properties and wear on the hot work tool steel AISI H11 in the method pulsed plasma nitriding [ Vol.10, Issue 3 - Autumn Year 1395]
  • Tahmasaebipour.Mohammad Analysis of Thermo-Mechanical Behavior of Gold Nanowire by Using Molecular Dynamics Method [ Vol.13, Issue 1 - Spring Year 1398]
  • Tahmasaebipour.Youness Analysis of Thermo-Mechanical Behavior of Gold Nanowire by Using Molecular Dynamics Method [ Vol.13, Issue 1 - Spring Year 1398]
  • Tahriri.Marjan Study catalytic effect of CeO2 nanoparticle on thermal decomposition of ammonium perchlorate [ Vol.12, Issue 1 - Spring Year 1397]
  • Tahriri.Marjan The effect of manganese (III) acetylacetonate nano coating on the mechanism of thermal decomposition of ammonium perchlorate [ Vol.14, Issue 2 - Summer Year 1399]
  • Tahriri.Marjan Study of the catalytic activity of nano-coating CuC2O4 on tne thermodynamic parameters of thermal decomposition of ammonium perchlorate [ Vol.11, Issue 4 - Winter Year 1396]
  • Tahriri.Mozhgan Study catalytic effect of CeO2 nanoparticle on thermal decomposition of ammonium perchlorate [ Vol.12, Issue 1 - Spring Year 1397]
  • Tamizifar.Morteza Enhanced thermal stability of Zr56Co28Al16 bulk metallic glass with addition of Ag and Cu elements [ Vol.13, Issue 2 - Summer Year 1398]
  • Tarah.Jamal Investigation of TiO2 influence on quality of the blends of clays from Semirom and Gheshlagh Mines for using in refractory industry [ Vol.10, Issue 1 - Spring Year 1395]
  • Tayebifard.Ali Spark Plasma Sintering of ZrB2–SiC–ZrC Nanocomposit Synthesized by MASPS [ Vol.14, Issue 2 - Summer Year 1399]
  • Tayebifard.Ali The Synthesis Of Nanocomposites (MoSi2-20% TiC) is activated by chemical Combustion Synthesis Method (COSHS) [ Vol.10, Issue 4 - Winter Year 1395]
  • Torabi.Aliasghar Aluminum alloy (АМГ6М) joining by two processes of friction-stir and non-consumable Tungsten electrode welding and comparison of their mechanical and microstructure properties [ Vol.13, Issue 1 - Spring Year 1398]
  • Torab-Mostaedi.M. Evaluating the Effective Parameters in the Zircon Alkali Decomposition Process and Determining the Optimal Operating Conditions for Zirconium Extraction [ Vol.15, Issue 3 - Autumn Year 1400]
  • Torkamany.Mohammad Javad Phase, microstructure characterization and hardening efficiency of SKS3 tool steel laser surface hardened by a high-power diode laser [ Vol.17, Issue 2 - Summer Year 1402]
  • toroghinejad.Mohammad reza Modelling and prediction of the yield strength of 6061 aluminum alloy processed by accumulative roll bonding (ARB) [ Vol.12, Issue 3 - Autumn Year 1397]
  • toroghinejad.Mohammad reza [ Vol.7, Issue 3 - Summer Year 1392]

V

  • vaezi.mohammad reza Synthesis and Characterization of polyurethane/silver nanocomposite by Microwave assisted [ Vol.12, Issue 4 - Winter Year 1397]
  • Vaezii.Mohammad Reza Fabrication of Nanofibers Core - Shell Oxide by One Step Electrospinning Method [ Vol.10, Issue 1 - Spring Year 1395]
  • Vafa.Ehsan Comparison of Corrosion behavior of aluminium 6061 alloy joined by friction stir lap welding and gas tungsten arc lap welding methods [ Vol.10, Issue 2 - Summer Year 1395]
  • Vahdat.Seyed Ebrahim Repair of Structural Steel Surface Groove by Using Spray Welding and Diffusion Welding Methods [ Vol.11, Issue 3 - Autumn Year 1396]
  • Vahidian.Amene The effects of deposition variable on the pulse electrodeposition FeNi-WC nanostructure composite [ Vol.10, Issue 3 - Autumn Year 1395]
  • Vahidian.Amene The Effect of Intercritical Annealing Temperature on the Microstructure and Mechanical Properties of Dual-Phase Cast Steel [ Vol.17, Issue 2 - Summer Year 1402]
  • Vahidian.Amene The Effects of Current Density and pH on the Electrode position of Fe-Ni Alloy and Efficiency Parameters [ Vol.9, Issue 4 - Winter Year 1394]
  • Valefi.Zia Comparison of microstructure and high-temperature oxidation resistance of NiCrAlY coatings formed by atmospheric plasma spraying (APS) and solid shielding shrouded plasma spraying (SSPS) [ Vol.15, Issue 2 - Summer Year 1400]
  • Valefi.Zia Microstructure and Ablation Resistance of ZrC Coating Prepared by Atmospheric Plasma Spraying (APS) and Solid Shielding/ Shrouded Plasma Spraying (SSPS) Methods on SiC-Coated Graphite [ Vol.15, Issue 4 - Winter Year 1400]
  • Valefi.Zia Investigating of High Temperature Oxidation and Thermal Shock Properties of YSZ/Al2O3 Composite Thermal Barrier Coatings with Alumina Made by Solution Precursor Thermal Spray [ Vol.14, Issue 4 - Winter Year 1399]
  • Valefi.Zia Investigating the effect of temperature and time of fusing process on the microstructure and wear performance of plasma sprayed NiCrBSi coatings [ Vol.13, Issue 2 - Summer Year 1398]
  • Valefi.Zia Investigating the performance of vertical crack formation in oxidation and thermal shock test of nano YSZ-40%wtAl2O3 coating applied on YSZ by atmospheric plasma spraying process [ Vol.18, Issue 2 - Summer Year 1403]
  • Valefi.Zia Improvement in fracture toughness and wear resistance of plasma-sprayed chromia coating by addition of YSZ nanoparticles [ Vol.14, Issue 3 - Autumn Year 1399]
  • Valefi.Zia Comparative Study of Microstructure, Phase Composition, and Oxidation Resistance of CoNiCrAlY Coating Deposited by HVOF and LPPS processes [ Vol.18, Issue 1 - Spring Year 1403]
  • Valefi.Zia Investigation of Microstructure of Alumina Single-Splate Made By Solution Precursor High-Velocity Flame Spraying [ Vol.16, Issue 3 - Autumn Year 1401]
  • Valefi.Zia Comparison of Oxidation and Thermal Shock Properties of YSZ/Nanoal2o3 Composite Thermal Barrier Coatings Made By Plasma Spraying of Un-Pyrolyzed Precursor and Aglomerated Nanocrystalline Alumina Powder [ Vol.15, Issue 3 - Autumn Year 1400]
  • Valefi.Zia Comparison of Isothermal Oxidation and Thermal Shock Properties of CoNiCrAlY Coating Sprayed by Atmospheric Plasma Spray and Nitrogen Gas Shrouded Plasma Spray Methods [ Vol.16, Issue 1 - Spring Year 1401]
  • Verdian.Mehdi Electrochemical study on hot corrosion behavior of aluminide diffusion coating deposited on inconel 713C superalloy [ Vol.13, Issue 1 - Spring Year 1398]

Y

  • Yadollahi.Ali Evaluating the Effective Parameters in the Zircon Alkali Decomposition Process and Determining the Optimal Operating Conditions for Zirconium Extraction [ Vol.15, Issue 3 - Autumn Year 1400]
  • Yaghobinejad.Yadollah Corrosion evaluation of industrial inorganic base coating on reinforcement by electrochemical impedance spectroscopy [ Vol.12, Issue 3 - Autumn Year 1397]
  • YAGHTIN.AMIRHOSSEIN Investigation of rheological properties and stability of aqueous suspensions containing YSZ ceramic nanoparticles [ Vol.17, Issue 2 - Summer Year 1402]
  • Yoozbashi zadeh.Hossein [ Vol.9, Issue 3 - Autumn Year 1394]
  • Yousefi.Hamid Reza Synthesis of Ag doped ZnO nanoparticles by Pechini sol-gel method and investigation of their photocatalytic properties [ Vol.12, Issue 4 - Winter Year 1397]
  • Yousefi.Masoud Investigating X-ray diffraction and microstructure analysis of new high entropy alloys TiZrNbXX made by powder metallurgy method [ Vol.18, Issue 2 - Summer Year 1403]

Z

  • zahraee.seyed mohammmad Influence of the electrode distance and applied electrical potential on deposition of nano alumina in ethanol suspension [ Vol.12, Issue 1 - Spring Year 1397]
  • Zakeri.Alireza Continuous electrowinning of nickel from dilute sulfate solutions [ Vol.13, Issue 1 - Spring Year 1398]
  • Zakeri.mohammad Spark Plasma Sintering of ZrB2–SiC–ZrC Nanocomposit Synthesized by MASPS [ Vol.14, Issue 2 - Summer Year 1399]
  • Zakerin.Nika Investigation of the Intergranular Corrosion Behavior of UNS S42000 Martensitic Stainless Steels Using Potentiodynamic Electrochemical Impedance Spectroscopy [ Vol.15, Issue 3 - Autumn Year 1400]
  • zakery nia.yaser Applying Nanocomposite Ni-B-ZrO2 Coating By Electroless Method on Steel CK45 and Study its Tribological Properties [ Vol.10, Issue 4 - Winter Year 1395]
  • Zamani Moghadam.Pejman Influence of Heat Treatment on Microstructure and Mechanical Properties of HVOF Sprayed Cr3C2-NiCr Coating [ Vol.14, Issue 4 - Winter Year 1399]
  • zamani moghaddam.pejman Comparative Study of Microstructure, Phase Composition, and Oxidation Resistance of CoNiCrAlY Coating Deposited by HVOF and LPPS processes [ Vol.18, Issue 1 - Spring Year 1403]
  • Zandrahimi.Morteza Influence of pH of Electroplating on Microstructure and Mechanical Properties of Ni-P-Tio2 Composite Coating Fabricated on AISI 430 Steel [ Vol.14, Issue 4 - Winter Year 1399]
  • Zandrahimi.Morteza Investigating the oxidation and electrical behavior of AISI 304 steel coated with cobalt for the application of solid oxide fuel cell [ Vol.14, Issue 1 - Spring Year 1399]
  • Zare Bidaki.Arman Effect of plasma electrolytic oxidation time on the corrosion behavior of Ti-13Nb-13Zr alloy in Ringer's solution [ Vol.11, Issue 2 - Summer Year 1396]
  • Zebarjad.Seied Mojtaba [ Vol.9, Issue 2 - Summer Year 1394]
  • zohour fazeli.mohammad amin Comparison of in vitro physico-chemical and antibacterial properties of 68S and 58S bioactive glasses synthesized by sol-gel method [ Vol.13, Issue 4 - Winter Year 1398]
  • Zolriasatein.Ashkan Effect of Graphite on the Mechanical Properties and Tribological Behavior of Aluminum Matrix ‎Nanocomposite [ Vol.18, Issue 1 - Spring Year 1403]

The rights to this website are owned by the Raimag Press Management System.
Copyright © 2021-2024

Home| Login| About Us| Contact Us|
[فارسی] [العربية] [fa] [ar]