Subject Areas :

علی مرتضایی ¹ , مرتضی شمعانیان ² , احمد ساعتچی ³

1 - دانشجوی کارشناسی ارشد، دانشکده مهندسی مواد، واحد نجف آباد، دانشگاه آزاد اسلامی، اصفهان
2 - استاد، دانشکده مهندسی مواد، دانشگاه صنعتی اصفهان، اصفهان
3 - استاد، دانشکده مهندسی مواد، دانشگاه صنعتی اصفهان، اصفهان

Received: 2013-08-19 Accepted : 2014-01-27 Published : 2015-05-22

Keywords:

References:

[1]     M. J .Donachi & S. J. Donachi, “Superalloys a technical guide”, US, ASM International, 2002.

 [2]     J. K. Hong, J. H. Park, N. K. Park, L. S. Eom, M. B. Kim & C.Y. Kang, “Microstructures and mechanical properties of Inconel 718 welds by CO2 laser welding”, J Mater Process Technol, Vol 201, pp. 515-20, 2008.

 [3]     S. Richards NL & X. Huang,”Heat Affected Zone Cracking in Cast Inconel 718”, Chaturvedi MC, Mater charact, Vol 28, pp 179-187, 1992.

 [4]     M. Durand. “The microstructure of superalloys.Amsterdam,Gordon and Brench”, 1997.

 [5]     J. Lippold & D. Kotecki, “Welding metallurgy & weldabillity of stainless steel”, US, John wiley, 2005.

 [6]     J. Dupont & J. Lippold, “Welding metallurgy & weldabillity of nickel-base super alloys”, USA, John Wiley, 2009.

 [7]     Standard Welding Terms and Difinitions, ANSI/AWS, Welding Handbook, Dissimilar metals, American Welding Society, Vol.4, Ch.12, PP.514, 2006.

 [8]     ASM handbook, properties and selection: irons, steels, and high performance alloys: elevated-temperature properties of stainless steels, Ohio, ASM International, Materials Park, 10th ed, vol. 1, 2002.

 [9]     S. Tavares, V. Moura, V. C. Da Costa, M. Ferreira & J. M. Parda, “lMicrostructural changes and corrosion resistance of AISI 310S steel exposed to 600-800°C”, Mater Charact, Vol 60, pp. 573-78, 2009.

 [10]  M. Sireesha, K. Shaju & V. A. Shankr, “A comprative evaluation of welding consumbles for dissimilar welds between 316LN austenitic stainless steel and alooy 800”, Journal of Nuclear Materials,Vol 279, pp. 65-76, 2000.

 [11]  R. Dehmolaei, M. Shamanian & A. Kermanpure, “Microstructure characterization of dissimilar welds between alloy 800 and HP heat resistance steel”, Mater charact, Vol 59, pp. 1447-1454, 2008.

 [12]  S. Kou, Welding metallurgy, second ed. Hoboken, John Wiley & Sons Inc, 2003.

 [13]  D. E. Nelson & E. A. Bae lack, “Morphology of weld heat-affected zone liquation in ca t Alloy 7 8”, Scripta materialia, Vol 19, pp. 371-379, 1986.

 [14]  R.Vincent, “Precipitation around welds in the nickel-base superalloy Inconel 718”, Acta Metallurgica, Vol. 33, pp. 1205-1216, 1985.

 [15]  M. J. Cieslak, T. J. Headley, A. D. Romig & T. A. Kollie, “A melting and solidification study of Alloy 625”, Metallurgical and Material Tran action A, Vol. 19, pp. 2319-2331, 1988.

 [16]  W. C. Winegard, “An introduction to the solidification of metals”, Institute of Metals, 1964.

 [17]  J. N. DuPont, C. V. Robino & A. R. Marder, “Solidification of Nb-bearing uperalloy”, Part II. Metallurgical and Materials Transactions, Vol. 29A, pp. 2797 -2806, 1998.

 [18]  S.W. Banovic & J.N. DuPont, “Dilution and microsegregation in dissimilar metal welds between super austenitic stainless steels and Ni base alloys”, Science and Technology of Welding and Joining, Vol 6 (6), pp. 274-383, 2003.

 [19]  J. N. DuPont, S. W. Banovic & A. R. Marder,“Microstructural evolution and weldability of dissimilar welds between a super austenitic stainless steel and nickel-ba ed Alloy ”,Welding Journal, Vol. 82, pp. 125-35, 2003.

 [20]  Hajiannia, M. Shamanian & M. Kasiri, “Microstructure and mechanical properties of AIS 347 stainless steel/A335 low alloy steel dissimilar joint produced by gas tungsten arc welding”,Materials and Design, Vol. 50, pp. 566-73, 2013.