The Effect of Separate and Simultaneous Use of Phosphate, Silicate and Borate Binders on the Physical and Mechanical Properties of Magnesia - Carbon Monolithic Refractories
Subject Areas :
سارا
علی زاده
1
(کارشناس ارشد، مرکز تحقیقات مواد پیشرفته، دانشکده مهندسی مواد، واحد نجف‌آباد، دانشگاه آزاد اسلامی، نجف‌آباد، ایران.)
احمد
منشی
2
(استاد، مرکز تحقیقات مواد پیشرفته، دانشکده مهندسی مواد، واحد نجف‌آباد، دانشگاه آزاد اسلامی، نجف‌آباد، ایران.)
ابراهیم
کرمیان
3
(استادیار، مرکز تحقیقات مواد پیشرفته، دانشکده مهندسی مواد، واحد نجف‌آباد، دانشگاه آزاد اسلامی، نجف‌آباد، ایران.)
Keywords:
Abstract :
[1] V. G. Rocha, R. Menendez, R. Santamaria, C. Blanco & M. Granda, “Oxidation Behavior of Magnesia–Carbon Materials Prepared with Petroleum Pitch as Binder”, Journal of Analytical and Applied Pyrolysis, Vol. 88, pp. 207-212, 2010.
[2] E. Y. Sako, M. A. L. Braulio & V. C. Pandolfelli, “Microstructural Evolution of Magnesia-Based Castables Containing Microsilica”, Ceramic International, Vol. 38, pp.6027-6033, 2010.
[3] W. M. Silva, C. G. Aneziris & M. A. M. Brito, “Effect of Alumina and Silica on Hydration Behavior of Magnesia-Based Refractory Castables”, American Ceramic Society, Vol. 94, No. 12, pp. 4218-4225, 2011.
[4] S. Zhang, N. J. Marriott & W. E. Lee, “Thermochemistry and Microstructures of MgO–C Refractories Containing Various Antioxidants”, Journal of European Ceramic Society, Vol. 21, pp. 1037–1047, 2001.
[5] L. Musante, L. F. Martorello, P. G. Galliano, A. L. Cavalieri & A. G. Tomba Martinez, “Mechanical Behavior of MgO–C Refractory Bricks Evaluated by Stress–Strain Curves”, Ceramics International, Vol. 38, pp. 4035–4047, 2012.
[6] M. Bag, S. Adak & R. Sarkar, “Study on Low Carbon Containing MgO-C Refractory: Use of Nano Carbon”, Ceramics International, Vol. 38, pp. 2339–2346, 2012.
[7] L. Bo, S. Jia-lin, T. Guang-sheng, L. Kai-qi, L. Lin & L. Yong-feng, “Effects of Nanometer Carbon Black on Performance of Low-Carbon MgO-C Composites”, Journal of Iron and Steel Research, Vol. 17, No.10, pp. 75-78, 2010.
[8] H. Jansen, S. Dudczig & C. G. Aneziris, “Magnesia-Carbon Castable with New Properties”, 51st Colloquium Refractories, Aachen, pp.84-87, 2008.
[9] G. L. Paraskvi & G. K. Christos, “Composition of Periclase and Calcium-Silicate Phases in Magnesia Refractories Derived from Natural Microcrystalline Magnesite”, Journal of the American Ceramic Society, Vol. 86, No. 6, pp. 1568-1574, 2005.
[10] C. C. Stephen & L. B. Gordon, “Handbook of Industrial Refractories Technology”, Noyes Pub. Co. 1992.
[11] US Patent, “Gunnable Refractory”, No. 3540897, 1970.
[12] K. ing Kwong & J. P. Bennett, “Recycling Practices of Spent MgO-C Refractories”, Journal of Minerals & Materials Characterization & Engineering, Vol. 1, No. 2, pp. 69-78, 2002.
[13] F. Arianpour, F. Kazemi & F. Golestani Fard, “Characterization, Microstructure and Corrosion Behavior of Magnesia Refractories Produced from Recycled Refractory Aggregates”, Minerals Engineering, Vol. 23 pp. 273–276, 2010.
[14] A. N. Conejo, R. G. Lule, F. Lopez & R. Rodriguez, “Recycling MgO-C Refractory in Electric Arc Furnaces”, Resources, Conservation and Recycling, Vol. 49, pp. 14–31, 2006.
[15] S. Hanagiri, A. Shimpo, T. Inuzuka, S. Sakaki, T. Matsui, S. Aso, T. Matsuda & H. Nakagawa, “Recent Improvement of Recycling Technology for Refractories”, Nippon Steel Technical Report, No. 98, 2008.
[16] م. پاغنده، ا. منشی و ر. عمادی، " بررسی تاثیر استفاده از اتصالات فسفاتی در جرم های کم سیمان"، مجله مواد و فناوری‌های پیشرفته، جلد یک، شماره یک، ص 7-1، 1391.
[17] O. Celikcioglu & A. Gungor, “The Effect of Sodium Tripolyphosphate on the Physical and Mechanical Properties of Brown Fused Alumina Based Ultra Low Cement Castable Refractories”, International Iron & Steel Symposium, pp. 400-405, Turkiye, 2012.
[18] S. Hayashi, H. Takahashi & A. Watanabe, “Behavior of Boric Compounds Added in MgO-C Bricks”, Taikabutsu Overseas. Vol. 11, pp. 12-19. 1991.