Subject Areas :

مسعود گلستانی پور ¹ , ابوالفضل باباخانی ² , سید مجتبی زبرجد ³

1 - گروه متالورژی و مواد دانشکده مهندسی دانشگاه فردوسی مشهد
2 - گروه متالورژی و مواد دانشکده مهندسی دانشگاه فردوسی مشهد
3 - گروه متالورژی و مواد دانشکده مهندسی دانشگاه فردوسی مشهد

Received: 2015-10-14 Accepted : 2015-12-21 Published : 2015-11-22

Keywords:

References:

[1]     J. Banhart, “Manufacture, characterization and application of cellular metals and metallic foams”, Progress in Material Science, Vol. 46, pp. 559-632, 2001.

 

[2]     M. F. Ashby, A. Evans, N. A. Fleck, L. J. Gibson, J. W. Hutchinson&  H. N. G. Wadley, “Metal Foams-A Design Guide”, Butterworth-Heinemann, London, 2000.

 

[3]     H. P. Degischer&  B. Kriszt, “Handbook of cellular metals”, Weinheim, Wiley-VCH, 2002.

 

[4]     N. Babcsan, “Ceramic Particles Stabilized Aluminum Foams”, Miskolc Materials Science and Technology Ph.D. School, Kerpely Antal, 2003.

 

[5]     V. Gergely, D. C. Curran&  T. W. Clyne, “The FOAMCARP process: foaming of aluminium MMCs by the chalk-aluminium reaction in precursors”, Composites Science and Technology, Vol. 63, pp. 2301-2310, 2003.

 

[6]     M. Golestanipour, H. Amini Mashhadi, M. S. Abravi, M. Malekjafarian & M. H. Sadeghian, “Manufacturing of Al/SiCp composite foams using calcium carbonate as foaming agent”, Materials Science and Technology, Vol. 27, pp. 923-927, 2011.

 

[7]       ا. زنده باد، ح. دانش­منش، "بررسی رفتار فشاری فوم­های آلومینیومی تولید شده با استفاده از فرایند اتصال نوردی تجمعی (ARB)"، مجله مواد نوین، جلد 1، شماره 4، صفحه 12-1، تابستان 1390.

 

[8]       م.د گلستانی­پور، م. توکلی، س .م. زبرجد، ا. باباخانی، ب. نادری "بررسی جذب انرژی پنل­های ساندویچی با هسته فوم آلومینیوم تحت آزمون سوراخ­کاری"، مجله مواد نوین، جلد 3، شماره 2، صفحه 38-25، زمستان 1391.

 

[9]     J. Banhart & H. W. Seeliger, “Aluminium Foam Sandwich Panels: Manufacture, Metallurgy and Applications”, Advanced Engineering Materials, Vol. 10, pp. 793-802, 2008.

 

[10] N. Sedliakova, F. Simancik, J. Kovacik & P. Minar, “Joining of Aluminium Foams”, Proceeding of Symposium Metallschaume, MIT Verlag, Bremen, pp. 177-185, 1997.

 

[11] Charles A. Harper, “Handbook of Plastics, Elastomers, and Composites”, 4th edition, McGraw-Hill, 2004.

 

[12] K. Imielinska, L. Guillaumat, R. Wojtyra & M. Castaings, “Effects of manufacturing and face/core bonding on impact damage in glass/polyester–PVC foam core sandwich panels”, Composites Part B: Engineering, Vol. 39, pp. 1034-1041, 2008.

 

[13] S. Rao, R. Das & D. Bhattacharyya, “Investigation of bond strength and energy absorption capabilities in recyclable sandwich panels”, Composites Part A: Applied Science and Manufacturing, Vol. 45, pp. 6-13, 2013.

 

[14] M-A. Chen, H-Zh. Li & X-M. Zhang, “Improvement of shear strength of aluminium-polypropylene lap joints by grafting maleic anhydride onto polypropylene”, International Journal of Adhesion and Adhesives, Vol. 27, pp. 175-187, 2007.

 

[15] Y-M. Jen, Ch-W. Ko & H-B. Lin, “Effect of the amount of adhesive on the bending fatigue strength of adhesively bonded aluminum honeycomb sandwich beams”, International Journal of Fatigue, Vol. 31, pp. 455-462, 2009.

 

[16] Y-M. Jen, F-L. Teng & T-Ch. Teng, “Two-stage cumulative bending fatigue behavior for the adhesively bonded aluminum honeycomb sandwich panels”, Materials & Design, Vol. 54, pp. 805-813, 2014.

 

[17] ASTM D1002, “Standard test method for apparent shear strength of single-lap-joint adhesively bonded metal specimens by tension loading (Metal-to-Metal)”, 2001.

 

[18] ASTM E864, “Standard practice for surface preparation of aluminum alloys to be adhesively bonded in honeycomb shelter panels”, 2003.

 

Hexcel Corporation, “REDUX Bonding Technology”, Publication No. RGU 034c, 2003.